First Aid Training Wounds and bleeding

Unit 2 Fire, Knots, Shelter

CampfireEnvironmental Considerations

Ample supply of dead wood. Location for a fire. Permitted by law.Naturally replenished within a reasonable time if you have to cut wood.Dont use high impact area.Leave no trace.

Functions of Fires Heat for emergency warmth and drying. Food preparation.Aesthetic/psychological appeal.

SoilsLitter; leaves, twigs and other natural organic matter.Duff; Decomposing litter.Mineral soil; made up of sand, gravel, and stones

Safety Considerations

Safe location Wind direction Never leave a fire unattended!Safe distance from tents and other equipment.Away from combustible materials (roots, grasses, trees , duff, fuel)Available water Weather conditions (dry)

Fire site types

Fire ringsMound or pedestalFire panFire pitsSite Restoration Ensure fire is completely out. Burn the wood to ash.Distribute ashes and rocks. If mound fire was used, replace the mineral soil to its original location

Building a fire.

CombustionFuel: Wood provides the fuel in campfires. The key is to have the correct size fuel for the amount of heat available. Heat: Heat ignites the fuel and must be balanced with it. Oxygen: there must be room for oxygen. Allow for ample air circulation and arrange the fuel so that oxygen can get to the fire.

Selection of firewood Softwood (eg. Pine, spruce and cedar) are convenient for use as tinder and kindling. They ignite readily and burn hot.Hardwood (eg. Maple, yellow birch, beach) are excellent for obtaining hot long lasting coals, providing a steady temperature for cooking and baking.

MapleYellow birchPineSpruceCedarMaterials in Fire construction Tinder; Fine, flammable material which will ignite from the heat of a match.Kindling; Small diameter branches (3/4 or less) or split wood which will ignite from the tinderFuel; Firewood which provides coals and uniform heat for cooking.

Laying the fireLean-toTepeeLog cabin/pyramid

Ignition methods.FrictionSunMatchFuel lighterFlint & Steel

Accelerants

Hand drillhttp://www.youtube.com/watch?v=0WjHZJbebJcBow drillhttp://www.youtube.com/watch?v=isUJns93in4 http://www.youtube.com/watch?v=Qk0TeoQPmEY&feature=channel Knot TyingFigure 8-provides a quick and convenient stopper knot to prevent a line sliding out of sight, e.g., up inside the mast. Its virtue is that, even after it has been jammed tightly against a block, it doesn't bind; it can be undone easily.Half hitch-to hitch or tie a rope to a standing object.Sheet Bend-is recommended for joining two ropes of unequal size. The thicker rope must be used for the simple bight as shown. It works equally well if the ropes are of the same size. Bowline-makes a reasonably secure loop in the end of a piece of rope. It has many uses, e.g., to fasten a mooring line to a ring or a post. Under load, it does not slip or bind. With no load it can be untied easily. Two bowlines can be linked together to join two ropes.Knot Tyinghttp://www.animatedknots.com/index.php?LogoImage=LogoGrog.jpg&Website=www.animatedknots.com

ShelterThings to consider before building.Present wind direction Prevailing winds for time of yearOpening orientation North South East WestSoil type and compaction (driving pegs and poles)Level of groundLow or high area Wet or dryHow many people it will sleep

Natural sheltersNatural shelters

Tarp tents