UNILAB UNIT SELECTOR Over 300 customers in 50 countries

UNILAB UNIT SELECTOR specifically analyzes the units at the following modalities: direct expansion, pump evaporator,

cooling, condensing and heating. Allows you to work both in selection and in verify. In selection mode, the user can se-

lect a range of units while in verify mode and it is possible to select only a single unit. During the calculation, it is possi-

ble to force the software to use always the nominal air flow or fan balance point. Furthermore, the calculation of the

number of circuits can be done in an automatic way. It is possible to calculate the noise from the curve of the fan.

There is also the possibility to insert a automatic calculation of the connections.

The user can manage their data efficiently with the help of the easy tool UNILAB USEL MANAGEMENT.

Currently, UNILAB UNIT SELECTOR, like all software UNILAB, using a wide variety of fluids: it contains the thermody-

namic and thermophysical properties with 12 mixtures of liquids and a list of more than 300 liquids, gases and refriger-

ants from the REFPROP NIST (National Institute of Standards and Technology).

Optional module:

COMMERCIAL LICENSES: for the Sales Department, which includes the SELECTION Module. Available packages

of 25, 50, 100 that do not include the UNILAB USEL MANAGEMENT.

It is a tool developed by UNILAB for companies in the HVAC industry, who

need to select and estimate unit coolers, air coolers, remote condensers

and dry coolers that are generated from a library of precomposed modules.

The software allows to make in quickly and accurately way the selection

and estimation of ventilation units.

Module means the insertion of a ventilation section (one or more fans), a

finned packed heat exchanger section (one or more coils) and an additional

section comprising the carpentry. During the calculation, the software will

create the units automatically, using the preloaded modules and generation

rules. For generation rules, UNILAB means all information necessary to

create the unit starting from a module.

FUNCTIONALITIES

Calculation

modalities

Calculation in selection & verify Direct expansion (unit coolers), pump evaporators (ammonia unit coolers), cooling (air coolers), condens-ing (remote condensers) Calculation through the nominal air flow or through the balance with the fan Possibility to specify the usage of a tolerance margin (in positive or in negative) for the required capacity Calculation of air coolers and dry coolers using the fluid flow or the fluid thermal difference Calculation of the noise, the absorbed current and the absorbed capacity at the operating point of the fan curve Calculation of the number of circuits in automatic way or from the prefixed list related to the coil unit or for fixed value related to the unit Possibility to modify the fin pitches Possibility to modify the fin material Possibility to filter units in selection mode: - according to dimensions - according to a maximum noise - according to the power supply and the fans typology - according to fin pitches in unit coolers and air coolers After the unit selection or verify, the software allows you to select certain accessories linked to the unit Possibility to show the surface from the archive or to calculate it using the software Possibility to show the internal volume from the archive or to calculate it using the software Possibility to insert a global discount

Archive

Management

(Usel

Management)

Available only for the technical license Archive of materials, tubes, fins, manifolds, geometries, fans, modules and accessories Insert, set, edit and erase materials, dimensions, prices, weights, other information like: geometries, coils, fans, units (series, sub series, typologies), accessories and relationships unit-accessories, drawings and images

Printouts

Possibility to see a print preview of the selected and configured unit

Available no. 5 printout template (one for each calculation modality)

Possibility to show/hide the drawings page

Possibility to show/hide the prices

Possibility to see only the total net price

Possibility to export printouts in PDF format Upload of

series by

UNILAB

Possibility to load units data by UNILAB, on demand, under quotation

Consignation of the technical data in digital format, preferably Excel file, according to the instructions provided by UNILAB

Customization Logo and company data linked to the main brand of the company Graphic interface according to the customers’ requirements Printout layout according to the customers’ requirements

Commercial

licences Possibility to order on demand, with additional cost, packages of commercial licenses (25, 50 and 100) and the possibility to enable different activation’s levels for end users

Fluid

properties

Pure and mixtures liquids (in heating and cooling modalities), refrigerants (in condensing and evaporat-ing) Added new refrigerants: R407C, R417F, R32 (REFPROP Library)

Other fluids on request, with additional cost Unit of

measurement Possibility to customize units of measurement

Languages Italian and English. Other languages on request, with additional cost. Unicode support for non Latin al-phabets

Technical

support Only to customers with regular subscription of maintenance contract. Automatic renewal. The contract covers maximum of n°3 technical licenses

Activation

modality Digital download—An internet connection is required for both installation and activation. Further access-es to the internet connection may be required while using the software

System

requirements Operating System Microsoft® Windows® Vista, 7 and 8, 32 or 64 bits

Unilab Srl - Via Nino Bixio, 6 – 35131 Padova, Italy

Tel: +39 (0)49 8763311 – Fax: +39 (0)49 8750196 - VAT no.: IT01334900287

Website: unilab.eu - E-mail: sales@unilab.eu

bit.ly/unilabdemo

Book a demonstration online at:

bit.ly/unilabyoutube bit.ly/unilablinkdin

Watch videos at: Follow us on: