Universal Jet ThrusterUJT Patent Pending

Ratings and Specs tool available today

• Length -.35m (14”)• OD – 73mm (2.875”) or 79mm (3.13”)• Threads – any to accommodate (pin up)• Torsional Yield – 7500 ft./lbs.• Tensile Yield – 73,000 daN (160,000 lbs.)• Temperature - unlimited ( O-Ring dependent)• Flow Capacity – only limited by Nozzle size up to 1m3

(6.29 bbl.) • Pressure Drop – limited to nozzle size, ideal pressure

drop @ 3500 kPa (500 Psi) • Compatible Fluid – Water, KCL, N2, Acid, light mud,

friction reducer, etc.

About the UJT

• Combined with Venturi tool, nozzle, spinning wash tools, with motors, etc. Unlimited “Water Tractor” effect

• Nozzles are easily changed for pump rate and pressure requirements• Using hydraulics vs. battling hydraulics with 0.3” • Can be ran with ACID for jetting and washing or other corrosive chemicals,

Nitrogen and foam friendly as well, also sour service • The UJT is the SHORTEST and STRONGEST tool in the BHA @ 0.35m (14”)• Replaces Bit Sub for crossover used in many BHA

UJT Advantages for Running Into The Horizontal Sectionof the Well

• UJT “smart jet sub” switches from pulling the BHA to milling operation, mills off, extends, then switches

back to pulling operation all on its own• This function repeatedly happens throughout each restriction• Faster mill out times, more time with bit in contact with debris instead of hydraulically pumping mill/bitoff of plug

• UJT uses hydraulic forces aided with Venturi effect vs. battling hydraulic forces• Thorough Radial jet cleaning to eliminate “beaching”

of debris• Maximizes cleaning of short trip or quick stall trips with 45 degree reverse continual jetting to keep debrisoff of low side of wellbore to minimize side loading

mill/bit with already dealt with debris • Efficiency milling operation using hydraulic force to the BHA’s advantage instead of fighting it• More rate, better action from vibrating tool, hydraulics advancements• Next generation milling efficiency

UJT Milling and Drilling Advantages

UJT Advantages for Wiper Trips and Pulling Out Of Hole

• Increased pull out of the hole speeds without risk of getting stuck• Maximizes hole cleaning with 8 jets @ 45 degree reverse jet sub with “swabcup”

like efficiency to get debris moving towards heel• While POOH the Venturi effect across the mill vacuums all debris that may

otherwise be left behind• On the fly gel placement (behind mill)• Eliminates the need for Venturi run for stage tool and debris sub removal

operations• Increased production, jetting perforations• Thorough Radial jet cleaning to eliminate “beaching” of debris• Can be ran with nozzle and no motor for clean out maximize cleaning and

jetting 360 degrees and at a 45 degree up hole jet and the ability to utilize asmaller work string and less pump rate required

• Next generation jetting and hole cleaning efficiency

• UJT is a tool that pulls the down hole BHA into the well using jetting force and Venturi e�ects

• Achieve depths that are not achievable with just agitation tools alone• More rate = better action from UJT, there is no need to “starve” the extended reach

tool now, pumping now pulls the BHA towards the toe with jetting force using pump rate to minimize unwanted stack-up • UJT is a pivotal with smaller CT operations in larger wellbores with the string being

pulled in the wellbore for cleanout operations ex. 2” in 4.5”• The UJT at full pump rate aids in centralization in RIH mode• UJT uses �uid hydraulic forces vs. battling hydraulic forces through the Venturi e�ect• Able to maintain control of BHA in well, continue on without the standard

practice of “taking a run” or “keep momentum” never stopping• Next generation of long lateral depth achievements along with use of extended

reach tools

Dave Gri�thThruster Energy Corp.

Cell: 403.801.7716

Email: dave.gri�th@thrusterenergy.com

Address: Suite 1400, 350 – 7th Avenue SW, Calgary, Alberta T2P 3N9

Website: www.thrusterenergy.com