universal led bluetooth dimmer · wiring diagram 1. installation: connect a class 2 power supply...

Wiring diagram1. Installation: Connect a Class 2 power supply with 12/24 VDC

output voltage to input side of Universal LED Bluetooth Dimmer. IMPORTANT: Power supply should be constant voltage type.

2. Check polarity of wires connected to Universal LED Bluetooth Dimmer (Red = positive, Black = negative).

3. Positive wire of LED light connects to Universal LED Bluetooth Dimmer shared positive output slot (+). IMPORTANT: Shared positive output means all positive wire of LED light connects to this slot.

4. Negative wire of LED light connected to each of four channels has its own negative slot. IMPORTANT: Total current from LED Dimming Module should be less than 4 A.

OU

TPUT 12-24 VD

CM

ax. 6 A total

INPU

T 12-24 VDC

+

12

34

+

12-24 VDC Class 2 power supply

+: Common (+)1: Channel 1 (-)2: Channel 2 (-)3: Channel 3 (-)4: Channel 4 (-)

1. App Installation: Ensure LED lighting system is installed according to Sloan Installation guide. Go to Google Play Store or Apple App Store. Search for "Casambi" app and install.

2. Turn on Bluetooth: Ensure Bluetooth connection is enabled in phone settings.

��

� ��

��

��

��

��

��

C A S A M B I��

��

��

�

sloanled-G Sound Bluetooth Autorotate

Flashlight Airplanemode

Location

Bluetooth ON

Powersaving

Performancemode

Bluelightfilter

Mobile data

MobileHotspot

11:31 AM | Mon, January 21N

CASAMBI

��

Allow Casambi to takepictures and record video?

1 of 3 DENY ALLOW

Nearby devices

Show demo

?

3. Accept permissions: After installing Casambi app, open and allow access to your phone by tapping "allow" on screen.

New Installations

Compatible devices:Android 4.4 or later devices produced after 2013 with full BT 4.0 supportiPhone 4S or lateriPad 3 or lateriPod Touch 5th gen or later

Universal LED Bluetooth DimmerInstallation Guide for 601115

PAGE 1 OF 4

CAS A MB I

Nearby devices

Show demo

My networks

?

��

1

SloanLED

Create a new network

Log in to network

Demo network

��

1 device

?

NetworksBack

4. Power on: Turn on AC power to energize system allowing it to be recognized by app.

5. Configure connection: On app start screen, a number one enclosed by red circle indicates the app detects a dimmer. Press "My Networks" to configure the connection.

6. Create a network: Select "Create a new network" option.

��

?

You have no luminaires yet - power on your luminaires to

take them into use.

Show nearby devices

SloanLED EditGroup

Luminaires Gallery Scenes More

?

��

New networkCancel Save

Name RequiredAa

Display Nearby Luminaires

Time zone

Location

Sharing

Mode

Location is optional and used for determining sunrise and sunset times.

VISITORS

RADIO SETTINGS

FREQUENCIES

Selects the operating mode for the network; this choice can be only made when creating the network.

2463 Mhz 2415 Mhz

2461 Mhz 2413 Mhz

2465 Mhz 2417 Mhz

Selects the radio frequencies for the network; thischoice can only be made when creating the network.

Pacific Standard Time

Not Shared

Balanced

Type System Name

��

Back

?

Nearby devices

CBU-PWM4 4xDIMCasambi

PairedRegular/24.1

This list contains the Bluetooth devices found nearby. Tap on a device to take it into use, unpair, ignore or update firmware.

HUE GATEWAYS

No Philips Hue gateways found.

Latest firmware version

Check for updates

Checks for updates in firmware and other device details.

0.0

BLUETOOTH DEVICES

7. Identify system: Type your system name (e.g. SloanLED) into "Name" field and press "Save".

8. Nearby devices: Press "Show nearby devices" on main menu.

9. Update check: Ensure software is up to date by selecting "Check for update" option. Then, press "Back" to go back to "Nearby devices" screen. Select your Bluetooth device and press "Paired device". Press "Unpair device".


PAGE 2 OF 4

After tapping the Start button you have �ve seconds to con�rm the unpair by �icking the luminaire -

quickly switch it OFF and back ON again.

Start

UnpairBack

��

CBU-PWM4 4xDIM

��

Back Nearby devices


UnpairedRegular/24.1

This list contains the Bluetooth devices found nearby. Tap on a device to take it into use, unpair, ignore or update firmware.

HUE GATEWAYS

No Philips Hue gateways found.

Latest firmware version

Check for updates

25.1

BLUETOOTH DEVICES

Add to ‘SloanLED’

Identify luminaire

Update firmware

Change profile

Ignore device

Check for updates

Checks for updates in firmware and other device details.

10. Starting: Press "Start". IMPORTANT: After tapping the "Start" button, AC power must be off within 5 seconds. Press "Back" button.

11. Ensure device is "Unpaired" in "Bluetooth Devices" section and select "Bluetooth Devices" section again.

12. Add Device: Press "Add to 'SloanLED'" button. This adds the configuration file that you created to the software.

��

Back Nearby devices


SloanLEDRegular/24.1

This list contains the Bluetooth devices found nearby. Tap on a device to take it into use, unpair, ignore or

BLUETOOTH DEVICES

��

SloanLED EditGroup


CBU-PWM4 4xDIM

CBU-PWM4 4xDIM

13. Within 30 seconds, "Bluetooth Devices" section changes to "SloanLED".IMPORTANT: If file name has not changed within 30 seconds, there may be a problem with your connection. Repeat the above process. Press the "Back" button.

14. Turn on device: Device logo will be lit up (bright white). Tap device logo to turn LED system off. Tap again to turn LED system back on. IMPORTANT: If device logo is highlighted, LED system is on. If device logo is dark, LED system is off. Dimming system is now ready to use.

ON

OFF


PAGE 3 OF 4

Customer service and technical support888.747.4LED (888.747.4533)SloanLED.com • [email protected]

Europe: Customer service and technical support+31 88 12 44 900 SloanLED.com • [email protected]

P/N 402378 Rev A 2019-04-10

WARNING: Total allowable output current is 4 A, divided across four channels. Individual channels can NOT handle 4 A max current on their own.

Dimming Guide

1. Turn AC power on. If LED system is lit, start app. "Start" screen will appear for a few seconds and will change to "Control" screen (device logo will be lit). IMPORTANT: If LED system is off (no AC power is on), "Start" screen will not change to control screen. Turn AC power on to correct issue. While device logo is lit, press and hold device logo until "Dimming Control" screen appears.

��

SloanLED EditGroup


CBU-PWM4 4xDIM

CBU-PWM4 4xDIM

CAS A MB I

Nearby devices

Show demo

My networks

��

1

1

OUTPUT 12-24 VDCMax. 6 A total

CASAMBI

INPUT 12-24 VDC

+

1 2 3 4+

CH. 1 CH. 2 CH. 3 CH. 4

2. Each channel is controlled by designated slide bar. On dimming control screen, top dimmer controls LED light connected to CH1 of LED Dimmer Module. Move slide bar from left to right or vice-versa to control light output. Left to Right -> Increase light intensity Right to Left -> Decrease light intensity

Dimmer 100.0 %

Dimmer 100.0 %

Dimmer 98.4 %

Dimmer 98.4 %

CH. 1

CH. 2

CH. 3

CH. 4


PAGE 4 OF 4

universal led bluetooth dimmer · wiring diagram 1. installation: connect a class 2 power supply...

Documents