u.s.a. · certifications u.s.a. 140 years iso 9001 iso 14001 bs ohsas 18001 awwa c515 *listings...
TRANSCRIPT
CERTIFICATIONS
W W W. K E N N E D Y VA LV E . C O M
U.S.A.140 YEARS
ISO 9001
ISO 14001
BS OHSAS 18001
AWWA C515
*Listings specific to product
14-24” Valves available without actuation
*
1
C515 KS-RW
C515 KS-RW
Kennedy Valve revolutionized the gate valve market in the early 1980’s by offering the first resilient seated gate valve in the USA. Today Kennedy is still the industry leader in UL-FM gate valve design and performance up to 24”. All 14”-54” Resilient Seated Gate Valves comply with AWWA C515. Kennedy Valve uses a fusion bonded epoxy coating on all RWGV.
The Kennedy Model KS-RW Resilient Seated Gate Valve embodies all the latest valve technology for simplicity, durability, and superior performance with no compromise in materials or workmanship.
- Indicator Posts - Extension Stems- Enclosed Gearing - Floor Boxes- T-Handles - Chainwheels- Stem Guides - 2” Sq. Operating Nuts- Electric Motor Operators - Handwheels
R W G VC 5 1 5 1 4 ” - 5 4 ”
C515 14” - 24” RW G V
2
NRS
OS&Y
1
2
3
4
56
7
89
10 11
314
18
19
20
21
22
23
24
25
26
27
28
12
1516
17 29
30
31
32
1333
No. DESCRIPTION MATERIAL1 NRS Stem Bronze
2 NRS Stem O-Ring Rubber
3 Thrust Washer Plastic
4 NRS Stem Nut Bronze
5 Wedge EPDM Encapsulated Ductile Iron
6 Wedge Cap (18”-20” ONLY) Plastic
7 NRS Actuator Plate Cast Iron
8 Stand / Plate O-Ring Rubber
9 Extension NRS Stand Ductile Iron
10 Stand / Plate Cap-Screw Stainless Steel
11 Cover / Stand O-Ring Rubber
12 Packing Gland Hex Nut Stainless Steel
13 Follower Plate Ductile Iron
14 Pipe Plug Stainless Steel
15 Follower Gland Bronze
16 Packing Garlock Style 18
17 Follower Stud Stainless Steel
No. DESCRIPTION MATERIAL18 Cover / Body Hex Bolt Stainless Steel
19 Cover / Body O-Ring Rubber
20 Cover/ Body Hex Nut Stainless Steel
21 Body Ductile Iron
22 OS&Y Wheel Nut Bronze
23 Handwheel Cast Iron
24 Yoke / Plate Hex Bolt Stainless Steel
25 OS&Y Yoke Washer Plastic
26 OS&Y Yoke Nut Bronze
27 Retainer Plate Cast Iron
28 OS&Y Yoke Ductile Iron
29 Yoke / Cover Hex Bolt Stainless Steel
30 OS&Y Stem Stainless Steel
31 OS&Y Stem Pin Stainless Steel
32 OS&Y Stem Head Bronze
33 Cover Ductile Iron
R W G VC 5 1 5 1 4 ” - 5 4 ”
14” - 24” C O M P O N E N T S
3
RESILIENT WEDGE GATE VALVE with CLEANTRACK
TECHNOLOGY In America today, systems are increasing their demand for larger-sized water lines. With these growing demands, Kennedy has made the commitment to meet and surpass previous large resilient seated gate valve requirements with a new concept- CleanTrack Technology.
Sediment buildup in valves has been a costly problem since the first water valves were created. In years past, systems with sediment-laden valves faced time consuming and costly valve removal or repair. Advanced large double disc technologies of decades past used various methods to clear the line of debris prior to closing.
Kennedy’s 30”-54” gate valves have taken the best of the century-old double disc design and integrated it with the best of the latest resilient seated gate valve design and technology, to create valves with CleanTrack technology. CleanTrack uses a unique roller-scraper system that automatically cleans the track in the valve body when the valve is closing. Less sediment buildup makes for improved performance which means reduced maintenance and lower potential replacement costs.
R W G VC 5 1 5 1 4 ” - 5 4 ”
C515 24” - 54” RW G V
THRUST BEARINGS Plastic thrust bearings above and below the thrust collar reduce friction and minimize operating torques.
EPOXY COATING Corrosion resistant fusion-bonded epoxy coating, conforming to AWWA C550 and NSF 61 Certified, protects both inside and outside of valve.
NO FLAT GASKETS O-ring seals at stuffing box and bonnet to body flanges ensures the best possible seal. There are no flat gaskets.
STAINLESS STEEL TRACK
4
REPLACEABLE O-RINGS Two O-ring seals are replaceable with the valve fully open and subjected to full-rated working pressure.
GEARING Horizontal & vertical gearing
available. 18”-24” reccommended. 30” and up required.
BRONZE STEM Long, trouble-free life with high strength, non-corrosive bronze stem and stem nut.
STAINLESS STEEL HARDWARE
Stainless steel nuts and bolts provide long-life corrosion protection.
100% COATED WEDGE 100% coated wedge ensures bubble-tight seal every time up to 250 PSI.
With twin seal design.
ACCEPT TAPPING CUTTER
Valves accept full-size tapping cutter (24”-48”).
(See Figure 1.)
BRONZE ROLLERS Rollers into scraper protect valve body from damage.
BRONZE SCRAPER
Bronze scraper affixed to resilient wedge wing
designed for long life performance.
STAINLESS STEEL TRACK 316 stainless steel track for corrosion and wear resistance.
*Rollers, Tracks & Scrapers (RTS) standard on valves 24” & Up.
FIG 1. CLEANTRACK TECHNOLOGY
R W G VC 5 1 5 1 4 ” - 5 4 ”
E N G I N E E R I N G F E AT U R E S
5
7571Mechanical Joint
14”-24”
Bevel Gearing Horizontal Installation
All End Styles 14”-24”
Spur Gearing Vertical
Installation All End Styles
14”-24”
OS&Y Bevel Gearing Horizontal Installation
All End Styles 14”-24”
OS&Y Spur Gearing Vertical
Installation All End Styles
14”-24”
7068AFlanged OS&Y
14”-24”
7561AFlanged14”-24”
7901Tyton Ends for D.I.and C900 PVC Pipe
14”-16”
7950Tapping x MJTapping Valve
14”-24”
7071Mechanical Joint
Post Indicator Valve14”-24”
NOTE: It is recommended that valves be installed with stems vertical when used in raw sewage or sludge applications or in water with excessive sediment. Flanged end connections not recommended for burial service.
VALUE SIZE A B C D E F G H J K L M N P Q R S U V NO
GEAR GEARED W X Y
14” 15 10 37-3/4
10-1/2
13-1/2
52-1/8 8 48-
5/89- 1/8
74-3/4
59-3/4 22 13-
1/416-3/4 52 100 76 59-
7/864-1/2
16” 16 10 37-3/4
10-1/2 13 51-
1/8 8 47-5/8
9- 1/8
74-3/4
59-3/4 22 12-
1/416-1/4 52 100 76 59-
7/864-1/2
18” 17 11-3/4
14-7/8 58 12 55-
3/410-1/8
14-5/8
16-1/8 64 189 90-
7/870-1/8
74-5/8
20” 18 11 14-1/2 57 12 54-
3/410-1/8
14-1/2 18 64 189 90-
7/870-1/8
74-5/8
24” 60-1/4
10-3/8
62-5/8 12 79-
1/8140-5/8
83-3/4 20 2 21 1.63 76
NO. OF TURNS TO FULL OPEN
R W G VC 5 1 5 1 4 ” - 5 4 ”
14” - 24” RW G V S TA N D A R D D I M E N S I O N S
6
30”-54” KS-RW- Gearing is required on 30” & up.- It is recommended that valves be installed with stems vertical when used in raw sewage or sludge applications or in water with excessive sediment. Flanged end connections not recommended for buried service.- 2” bypass valves are available on 36” gate valves- 4” bypass valves are available on 30” and 48”-54” gate valves- 8” bypass valves are available on 42” gate valves
All End StylesBevel Gearing
Horizontal Installation30”-54”
L (Min.) J (Min.)
3 2 1
A
D
C
B
A
B
C
D
678
8 7 6 5 4 3 2 1
5 4
SHEET 1 OF 1
K H J (Min.)H
Flanged BodyDimensions
L (Min.) J (Min.)
3 2 1
A
D
C
B
A
B
C
D
678
8 7 6 5 4 3 2 1
5 4
SHEET 1 OF 1
K H L (Min.)K
MJ BodyDimensions
All End StylesSpur Gearing
Vertical Installation30”-54”
VALUE SIZE A B C D E F G H J K L
No. of turns
to openGEAR RATIO
30” 71-3/8 14-7/8 80 14 40.00 2.13 35.50 1.69 588 6:1
36” 81-1/16 14-7/8 89-11/16 14 30.75 2.38 38.75 2.00 684 6:1
42” 98-3/8 17 108-1/2 16 36.00 2.63 39.00 2.00 800 8:1
48” 101-3/8 17 111-1/2 16 35.50 2.75 44.00 2.00 800 8:1
54” 101-3/8 17 111-1/2 16 48.00 3.00 800 8:1
AVAILABLE SIZES
R W G VC 5 1 5 1 4 ” - 5 4 ”
30” - 54” S TA N D A R D D I M E N S I O N S
RWGV C515 14-54 REV 4: AUG 2020
C For Generations
ORDERINGINFORMATION
PH: 800-782-5831 607-734-2211 FAX: 800-952-4771
KENNEDY VALVE1021 E. WATER ST.
ELMIRA, NY14902-1516
KENNEDY VALVE
SPECIFICATIONS & FEATURES Our AWWA C515 Resilient Wedge Gate Valves meet or exceed the requirements of AWWA standard C515 and NSF listed.
Available in either non-rising stem (NRS) or outside screw & yoke (OS&Y). NRS Style is available with post plate for adaptation with an indicator post.
Rated Pressure Shell Test Pressure Seat Test Pressure- AWWA 250 PSI. - 500 PSI. - 250 PSI. (14”-54”) (14”-54”) PSI (14”-54”)
1|
2|
3|4|
5|
6|
7|8|
9|
10|11|12|
13| Valves shall have component parts cast, machined, assembled, and tested in the USA.
All external bolting materials shall be stainless steel and have hexagonal heads.
Valves sizes 30” & larger shall have brass bushings where the stem passes through the bonnet.
Each valve shall have maker’s name, pressure rating, and year in which it was manufactured cast in the body. Prior to shipment from the factory, each valve shall be tested by hydrostatic pressure equal to the requirements of AWWA C515.
Stems for NRS assemblies shall be copper alloy with integral collars in full compliance with AWWA. Stems shall operate with copper alloy stem nuts independent of wedge and of stem. NRS stems shall have two O-rings located above thrust collar and two O-rings below. Stem O-rings above the thrust collar shall be replaceable with valve fully opened and subjected to full pressure. The stems shall also have one low-torque thrust bearing located above and one below the stem collar to reduce friction during operation.
30” & up shall include CleanTrackTM Technology. CleanTrackTM consists of bronze rollers housed in a bronze scraper on the both sides of the wedge, traveling in a 316 stainless steel track.
The body, bonnet and stuffing box shall be fusion-bond epoxy coated, both interior and exterior. Epoxy shall be applied in accordance with AWWA C550 and be NSF 61 Certified.
Unobstructed waterway shall accept a full size tapping cutter.
The valves shall be non-rising stem, opening by turning clockwise or counter-clockwise, and provided with a 2” square operating nut or a handwheel.
Valves shall be supplied with O-ring seals at all pressure retaining joints. No flat gaskets or conventional type packing shall be allowed on NRS valves.
The sealing rubber shall be permanently bonded to the wedge per ASTM D429.
The valves shall have a ductile iron body, bonnet, and stuffing box. The wedge shall be ductile iron and totally encapsulated with EPDM rubber.
Valves shall conform to AWWA Standard C515 covering Resilient Seated Gate Valves for Water Supply Service, and be rated for 250 PSI cold water working pressure.