usa octg catalog
TRANSCRIPT
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 1/124
Vallourec USA Corporation
OCTG Catalog
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 2/124
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 3/124
Vallourec USA Corporation / Introduction / pg
Table of Contents
Vallourec USA Corporation
Disclaimer and Limits of Liability............1
Introduction............................................2
Premium Products..................................9
Premium Services.................................15
Premium Connections..........................19
Material Properties...............................31
Performance Data (Tubing)...................37
Performance Data
(Casing 4 1/2” - 7")...............................41
Performance Data(Casing 7 5/8” - 10 3/4”)...............................61
Performance Data
(Casing 11 3/4” - 26”)..........................81
Marking & Color Codes......................95
All information is provided by Vallourec or its affiliates at user’s sole risk, without liability for
loss, damage or injury resulting from the usethereof; and on an “AS IS” basis without warrantyor representation of any kind, whether express orimplied, including without limitation any warrantyof merchantability, fitness for purpose, accuracy
or completeness. This document and its contentsare subject to change without notice. In no eventshall Vallourec or its affiliates be responsible
for any indirect, special, incidental, punitive, exemplary or consequential loss or damage(including without limitation, loss of use, loss ofbargain, loss of revenue, profit or anticipatedprofit) however caused or arising, and whethersuch losses or damages were foreseeable or
Vallourec or its affiliates was advised of the
possibility of such damages.
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 4/124
pg. 2 / Vallourec USA Corporation / Introduction
Vallourec in North America is comprisedof the following six companies: Vallourec
USA Corporation, its sales entity, VallourecStar, Vallourec Tube-Alloy, VAM USA,
Vallourec Canada and Vallourec Mexico.Through the years the Vallourec Group
has developed a reputation for quality
products, exceptional service and constant innovation.
The company’s North American steel andpipe-making operations are based in
Youngstown, Ohio. The original facilitywithin the complex boasts the latest
technology in electric arc furnace (EAF)steelmaking and mandrel pipe mill (MPM)
production. The new state of the art millthat came on line as of December 2012,known as the fine quality mill (FQM),
offers pipe rolling, end finishing, APIthreading, and semi-premium threading.
The integrated facility includes a stemill, a mill specializing in medium diam
ter tubes (from 5” to 10-3/4”) and the nmill which specializes in the manufactu
of small diameter tubes (2 3/8” to 7”).
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 5/124
Vallourec USA Corporation / Introduction / pg
Vallourec Star and it's two mills are cap
ble of manufacturing seamless tubu
products in ODs ranging from 2-3/8”
10-3/4”.
The plant in Muskogee, Oklahom
specializes in production and inspectiof high performance, proprietary, a
custom casing and coupling stock addition to API 5CT products. T
Muskogee facility offers heat treatmewith precise temperature contrstraightening and hot sizing, finishin
hydrostatic pressure testing and premum CNC threading services up to 16
Our Muskogee mill is known for providithe industry with high performance so
service grades supported by an on-smetallurgical lab.
Vallourec in North America
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 6/124
The Houston, Texas operations provide
services such as heat treatment,
straightening and hot sizing, finishing andhydrostatic pressure testing third-party
inspection, 8D collapse testing, semi-pre-mium and API threading with accessi-
bility to VAM® premium CNC threadingservices. The Houston high-tech,heat-treating facility provides precise
temperature control and water quench-ing, allowing production of high yield
strength OCTG and coupling stockrequired for today’s critical environments.
Other North American facilities includethree premium threading entities:
Vallourec Canada, with two locations in
Canada, VAM USA with four sitesbetween Houston, Texas and Muskogee,
Oklahoma, and Vallourec Mexico basedin Veracruz. Finally, Vallourec Tube-Alloy
located in Houston, Texas, Houma, andBroussard, Louisiana and Casper,Wyoming, provides downhole premium
accessories worldwide.
Complementing the North America offer,
the Vallourec Group offers a large port-
folio of diversified, innovative and high
value-added tubular products that
comprises the world’s most extensiverange of seamless tubes, with outside
diameters of up to 26 inches in over 250grades of steel.
Brief History
Vallourec has more than 100 years
experience and has been constan
expanding thanks to internal and externgrowth. One of the more importaexpansions was the joint-venture wMannesmann in 1997 forming Vallourec
Mannesmann Tubes (V & M Tubes) mering all their production units and mark
ing interests for seamless hot-rolltubes and threaded oilfield tubulars.
2005, Vallourec acquired the 45% staheld by Mannesmannröhren-Werke in VM Tubes, which is now 100%-owned
Vallourec.
In 2013, the Group went through rebranding exercise worldwide and
now known simply as Vallourec.
pg. 4 / Vallourec USA Corporation / Introduction
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 7/124
The Vallourec Group is a world leadingmanufacturer of seamless steel tubesand specific tubular products for industrial
applications. Specializing in the mostcomplex and highly-demanding industrial
applications (extreme temperatures,
pressures and corrosion), notably in
the energy sector, the Group offers a portfolio of diversified, unique and high
value-added tubular products. Today,Vallourec is a supplier of referencethroughout the world and has the major
competitive advantage to offer its customers high-quality products and
local services throughout the world.
Production facilities on four continents,complemented by a worldwide networkof sales offices and service centers
ensure a global presence in the proximityof its customers everywhere.
Its Oil & Gas Division is recognized
worldwide for its commitment to extremeenvironment solutions. The high-techproducts designed and developed by
the Oil and Gas Division meet the reliability
requirements of even the most demanding
customers. They include drilling products, plain-end or threaded seamless tubes
and casing for oil and gas production
with standard API or VAM®
premiumconnections for a variety of applications.
Vallourec USA Corporation / Introduction / pg
Vallourec in the World
Sales Offices
North America
South America
Europe
Africa Asia and Middle East
Steel Plants Manufacturing Plants Accessories and Repair VAM® Licensee Facilities VAM® Field Service Internatio
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 8/124
To secure complete control over the entire
production process from steelmaking to
shipment of the finished product,Vallourec operates three steel mills (electric steel mills in France and the
United States, and an oxygen steel mill inBrazil) in addition to owning a 20% share
in the HKM mill (Germany) and a 56%
share in the VSB mill (Brazil). The Vallourec
Group of companies produces hot-rolledseamless steel tubes in sizes rangingfrom 2-3/8” to 26”. Available production
capacity, coupled with the competenceof expert teams, enables Vallourec to
accommodate production of specially
formulated grades, thus creating conditions of continuing performance improvementsto service the customer.
Vallourec offers a full and
unique range of products:
API grades Yield strength: 55 to 150 ksi. High Collapse: includes the
requirements and parameters adaptedto the various hostile environments
which are under the highest pressures. 13% Cr & super 13% Cr: suitable for
Sweet CO2 environment with limited
H2S presence. It covers therequirements and parameters of
such hostile conditions includinghigh pressures, high temperatures
and more. Sour Service: suitable for
environments where H2S is present.
It covers the requirements andparameters of such hostile conditions
including high pressures, lowtemperatures, low pH, and more.
Corrosion Resistant Alloy (CRA):suitable for the more stringent
corrosive environments beyond theproperties of Sour Service grades.
Vacuum Insulated Tubing (VIT): idealfor deepwater projects and other
specialized applications includingreduction of APB, heavy oil
production, and steam injection. Expandable Tubing (ET): ideal for
recompletions, zonal isolation andcasing remediation.
Riser Grade: Developed for highfatigue conditions seen in top tensioriser systems with enhancementsin chemistry, hardness, CTOP
performance, and SSC resistance.
pg. 6 / Vallourec USA Corporation / Introduction
An Integrated & Competitive Process
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 9/124
Customized Solutions to
Service Long Term
Partnerships
Vallourec offers a worldwide after-saleservices network with VAM® Services
and VAM® Field Service International:
A VAM® licensee network with morethan 200 workshops in over 40countries located close to our
customers operations worldwide.They provide accessories threading,
repair and inspection of VAM® Premium Connections.
VAM® Services, a division of VallourecOil & Gas France, is in charge of the
quality management of the VAM® licensees’ network. This includes thequalification of new workshops,
regular audits of each licensee, thedispatch and control of all VAM®
technical documentation andtools such as gauges, inserts, etc.
A full team of certified VAM® FieldServices technicians are also available24 hours a day to provide field
support for inspection, rig preparationand supervision of running Vallourec
pipe and VAM® connectionsthroughout the world.
High QHS&E Standards
Vallourec has developed QHS&E standards
to consistently comply with applicable
regulations and national laws, whilerespecting and fulfilling country-specific
needs.
Quality
High quality and service standards are
maintained through the company’s SixSigma and Continuous Improvement
programs. All Vallourec facilities are ISO 9001: 2008 certified in addition tobeing licensed to manufacture API 5CT,
5L and 5D products.
Create, improve and promote
solutions for the future
Our comprehensive Research &Development policy aims to provide
innovative solutions to our customers.The objective is to create, improve andpromote products, services, materials
and processes for the future.
Suitable to actual market needs and
working in close cooperation with
marketing and plant teams, our R&D staffhas access to substantial resources forputting this policy into effect:
Over 500 employees dedicated to
R&D An R&D budget of $120 million in
2013
Six research centers in four
countries dedicated to OCTG
product development:
Germany
- Vallourec Research Center
Germany, Düsseldorf, Germany- Vallourec Competence Center
Riesa, Riesa, Germany France
- Vallourec Research Center France, Aulnoye, France
Brazil
- Vallourec Research Center Brazil,
Belo Horizonte, Brazil- Vallourec Competence Center Rio,
Rio de Janeiro, Brazil USA
- VAM Connection Technology Center
USA, Houston, USA
These centers, equipped with high-per-formance investigative and modelling
tools, provide expertise to Vallourec’score competencies, including metallurgy,heat transfer technology, non-destructive
testing, corrosion, surface treatment,premium connection technology, and
product and process simulations.
Vallourec deploys Continuous Improveme
Process (CIP) Groups as part of its ToQuality Management program an
constantly optimizes the performance
the workforce with dynamic, extendvocational training programs and efficie
Competency Management systems.
Health and Safety
"The health and safety of our employe
in all our locations is of key significanfor the future of our company and it tak
the very highest priority ..." (Chairman the Executive Board of Vallourec). Henc
Vallourec is certified to OHSA18001:2007, demonstrating the compan
commitment to safety.
Safety Mission Statement
Ensure that Safety is a core business
value. Implement and maintain a continuou
improvement-based occupational
safety and health (OSH) managemensystem.
Manage risks within acceptable
industry standards to preventoccupational related injuriesand illnesses.
Promote a culture that does notaccept injuries as a cost of doingbusiness.
Incorporate safety into every businesprocess and decision.
Measure performance and activelyseek opportunities for improvement.
Actively seek input and feedback froall Team Members.
Comply with all regulatory standards
and, where feasible, implement bestpractice methods.
Vallourec USA Corporation / Introduction / pg
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 10/124
Preserving our environment
Through its environmental policy, Vallourecaims to minimize the environmental impact of its activities at all levels, andtreats the well-being of future genera-
tions as a major priority.
Vallourec environmental priorities focus on
optimizing resources, reducing CO2 emis-
sions and waste, as well as certifying
facilities.
Optimization of resources
A series of initiatives have been under-taken to optimize consumption of
resources such as water, energy and rawmaterials, and to improve the conditionsin which they are used. Considerable
efforts have been made to reduce waterconsumption at all Vallourec locations, in
particular by recycling water and collecting runoff. As a result, water use was cut in
half in a ten year period.
Lower CO2 emissions
Vallourec is committed to reducing CO2emissions as exemplified by the steelmanufacturing process at Vallourec doBrazil, which uses charcoal from its owneucalyptus plantations (Biomass) in its
blast furnaces as a substitute for coke. As
they grow, the trees in these plantationsconsume carbon dioxide and release
oxygen. CO2 emissions from the steelmill are offset by absorptions by theeucalyptus plantations and as a result,
the overall carbon balance for the production of steel in Brazil is the lowest
in the market when compared with othermethods of production (i.e. electric arc
furnace or blast oxygen furnace).
Capture and storage of CO2
One of the main areas of R&D focus for
Vallourec concerns capture, transportand storage of CO2. The Vallourec Group
is participating in the France Nord projectalongside French and German research
organizations. The objective of the
project is to set up a pilot infrastructure in
northern France for the transport and
storage of CO2 in deep saline aquifers be used for industrial emissions. T
Vallourec Group together with seveindustrial partners and the FrenEnvironment and Energy Manageme
Agency (ADEME) will finance this $million project.
Waste reduction
Vallourec is also working hard to c
pollutant emissions, reduce nois
decrease waste volumes and system
atically recover and reprocess residu
waste. All indicators measuring t
release of pollutants into the environmecomply with regulatory standards aperformance has consistently improvover the last three years.
Certified facilities
Regular environmental audits are organiz
in each country to assess regulatocompliance, environmental performanand ecological risks. Most of Vallourec
production facilities, representing 98%total production, are certified ISO 1400
pg. 8 / Vallourec USA Corporation / Introduction
Environment
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 11/124
Premium Products
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 12/124
Premium Products
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 13/124
Vallourec USA Corporation / Premium Products / pg
Premium Tubular Solutions
Vallourec specializes in developing,
manufacturing and servicing high
performance, proprietary, custom and
value added tubular solutions. With somany products to choose from,
Vallourec provides engineering andtechnical services to assist you in select-ing the optimal tubular solution for your
particular downhole application.
In addition to standard API 5CT casing
grades, Vallourec produces pipe to
meet specific customer requirements,
including:
Non-standard sizes and weights Custom applications Custom grades Special inspections Special testing Special documentation
All Vallourec quenched and tempered
(Q&T) API, API enhanced, and propri-
etary grades meet API 5CT (ISO 11960)
PSL2 requirements.
Premium Products
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 14/124
pg. 10 / Vallourec USA Corporation / Premium Products
Enhanced Burst Casing
Vallourec Star Enhanced Burst Casing (grade nomenclature denoted by E) delivers controlled yield strength with ahigher burst rating than similar API
grades. This feature not only enhancesperformance, but also allows a reduction
of weight and cost compared to standard API casing grades.
Additional benefits include:
Modern metallurgical practices andprocess control produce yield strength
limits optimized within the API range. Since the yield strength is within limits
of API 5CT, enhanced burst can also beoffered on our sour service grades asrecommended by NACE Standard
MR0175. Enhanced burst grades meet all
minimum API 5CT PSL2 requirementsand are API monogrammed.
High Collapse Casing
The Vallourec Group of Companies* High
Collapse and Star Enhanced Collapse
Casing (grade nomenclature denoted by
HC & EC) delivers casing with a highercollapse rating than similar API grades.
Compared to standard API grades, high
collapse performance is verified by
collapse testing samples that have alength to diameter ratio of 8:1. Hence,high collapse casing not only resists a
higher range of external loads that willcollapse conventional API casing, but
also does a better job of preserving hole
integrity during production.
Additional applications that often dictatethe use of Vallourec high collapse casinginclude:
Exploration Wells where additional
safety margins are necessary due tothe uncertainties of the formation and
pressures to be encountered. Slim Well Designs where special drifts
are common practice. Deep and High Pressure Wells which
require optimization of all technical
parameters in order to reach the payzone with a “profitable” production
size.
Deep Water Risers measuresprofitability against each poundgained. Higher strength risers allow forsmaller platforms and subsea
equipment, which translates into loweroverall production costs.
Sour Service Environments wherecorrosion resistance adds one more
constraint to the equation. High Reliability Standards (Health,
Safety, Environment, HPHT) requiring
a meaningful guarantee ofperformance.
The Vallourec Group of Companies* high
collapse casing often allows to reducepipe weight and increase setting depth.
Additional benefits include:
P110EC provides the same internal
yield strength (“burst”) rating as Q125at a lower cost.
Precise control of yield strength andwall thickness, combined withmanufacturing practices results in
minimal residual stress. High Collapse grades exceed all
minimum API 5CT requirements andare API monogrammed.
High Collapse with Enhanced
Burst Casing
Vallourec Star High Collapse wi
Enhanced Burst Casing (grad
nomenclature denoted by HCE) offers t
ultimate in tubular performance. The
widely field proven casing produc
provide tubular technology that affor
design options for the most difficult we
Additional benefits include:
HCE casing products have the burstresistance of Vallourec Star enhance
burst products with the increasedcollapse resistance of Vallourec Starhigh collapse products.
High Collapse with enhanced Burstgrades meet all API 5CT PSL2
requirements and are APImonogrammed.
VAM Riser
The VAM Riser grades were deve
oped for the high fatigue conditio
experienced in top tension riser system
Riser grades are available in 95ksi
125ksi yield strengths. They we
developed with a API 5CT PSL2 lev
as a basis with enhancements to impro
riser fatigue usage. These inlclude:
- chemistry
- manufacturing route- hardness
- impact toughness- CTOD performance- microstructure control
- sulfide stress cracking resistance
(for sour service grades)
- dimensional control- and non-destructive inspection
and testing
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 15/124
Vallourec USA Corporation/ Premium Products / pg.
Sour Service Casing
“Sour Service” refers to a well environ-ment containing Hydrogen Sulfide (H2S),which is naturally associated with acidic
conditions. H2S comes from the decomposition of organic material, so it
is often found in oil & gas environments
which derive from the same phenomenon.
Even if not sour at the onset, some wellsbecome sour over time, as H2S bearingformation water starts to flow together
with oil. It is well known that H2S is ahazard to human health, living organisms,
and more generally to the environment.That is the reason why historically wells
found in “Sour” environments were oftenplugged and abandoned. Today SourService environments provide further
challenges with deeper wells, higherpressures and extreme corrosive condi-
tions.
Vallourec Sour Service Casing offers
resistance to the most corrosive envi-ronments confirmed by extensive NACE
testing. In addition, Vallourec providesworkable solutions for the design of
deep, high-pressure, sour wells by
carefully designing and controllingthe following parameters:
Special chemistry and superior
quench-and-temper processing ensure through wall uniformity and complete
martensitic transformation. Superior sulfide stress cracking
resistance is obtained by controlling
hardness, strength, microstructureand utilizing practices that promote
steel cleanliness and minimizeresidual stress.
Standard sulfide stress corrosionresistance testing is conducted in
conformance with NACE TM0177requirements.
NACE TM0177 Method D sulfide strecorrosion resistance testing can be
provided.
Vallourec Star also offers enhanced A
sour service products such as T95E whigher burst and T95HC with higher c
lapse. For mild sour conditions Vallour
Star is offering P110MS which is testedfit for purpose condition meeting tNACE MR0175 requirements. For sevesour service conditions or special app
cations such as HPHT, Vallourec offeproprietary grades with improved so
service performance.
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 16/124
Vacuum Insulated Tubing (VIT)
THERMOCASE®
Vallourec Tube-Alloy’s Vacuum InsulatTubing, THERMOCASE®, a high-perfo
mance, double-walled tubular produprovides temperature isolation
response to various oilfield productichallenges due to temperatures diffeences between the reservoir and we
head.
Vallourec Tube-Alloy Vacuum InsulatTubing performance is stated as a
value, which is expressed as BTUs/ho
foot-degree F. Currently, the product capable of a joint-averaged k value
0.004-0.006 in deepwater applicationand 0.006-0.02 in higher temperatu
applications such as steam flooding.
Vallourec Tube-Alloy Vacuum InsulatTubing advantages:
Favored VIT deepwater supplier sinc1999
Proven minimum 10 year service life Thermal modeling available for each
project Worldwide installations in the most
severe environments Robust construction beyond pipe
limitations Multiple configurations to optimize
solutions Manufactured in lengths up to and
including Range 3 (RG3) Coupling insulations customized to
the application Proven capability to qualify welding
procedures for various pipechemistries, e.g. carbon, super
martensitic, stainless steels, nickelbased alloys and super duplex
pg. 12 / Vallourec USA Corporation / Premium Products
THERMOCASE® is a registered trademark of Vallourec Tube-Alloy, LLC
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 17/124
Thermocase® is ideal for the following applications:
Steam Injection
- Used in huff and puff, continuousinjection and SAGD applications
(API Grav < 14, no reservoirpressure)
- Use of insulated tubing can
economically make-or-breakexploitation of oil field
Permafrost Preservation
- Subsidence prevention aroundground-based wellhead, increas
access and stabilizing wellheadstructures.
- Strict environmental regulations
Thermocase® offers the highest level
thermal insulation available in a dowhole tubular.
Annular Pressure Buildup
(APB)
- Arises from annular fluid heating with trapped annuli
- Below Mudline, vacuum insulatedtubing (THERMOCASE® ) typically
used to alleviate the root cause, thehot product inside cold annuli- Deep formation hydrate zones can
be mobilized by operations,contributing to APB risk
- Rupture disks, foamed cementmitigate consequences
Wax and Hydrate
Prevention (paraffin)
- Costly intervention (pigging,chemical injection, coiled tubing)
avoided or reduced with insulationuse
- Variety of technologies used inrisers, flowlines (gels, syntactics,foams, rubbers, plastics, pipe-in-
pipe, N2)
Heavy Oil Flow
Enhancement (viscosity)
- Used in long strings to decreaseviscosity, increase flow and enhance
profitability (API Grav 14-17)
DEEPWATER
CHALLENGES
STEAM
INJECTION
PERMAFROST
PRESERVATION
Vallourec USA Corporation / Premium Products / pg.
VIT Model 750 Outer Tube
Threaded Inner Tube Welded
Inside of the Outer Tube
Butt Weld
Transition
Spool
Fillet
Welds
Inner
Pipe
Outer
Pipe
OptionalForged
Integral
Upset
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 18/124
pg. 14 / Vallourec USA Corporation / Premium Products
Expandable Tubulars (ET)
Vallourec Expandable Tubulars (ET) minimize deep drilling issues, such astelescoping casing strings and boreholetapering, before reaching the pay zone.
Minimal loss of inside casing diametermakes the technology applicable as a
contingency casing string, drilling liner orcased-hole liner in both workover andcompletion operations. In addition, ET is
ideal for deepwater projects and otherspecialized applications including:
Recompletion
Recompletions utilizing Vallourec ET
technology enables operators to run
and expand a clad liner, typically after
the fist year of production, in the hori-
zontal section of the well and recom-
plete it to achieve greater production
levels.
Zonal Isolation
Incorporating Vallourec ET technologyinto Zonal Isolations solves lost circulation problems and seals off troublezones where the pore pressure/fracture
gradient relationship is a concern.
Sidetrack
Vallourec ET technology can be used in
sidetrack applications allowing operators
to enter new pay zones from a producing
well while eliminating the cement job.
Casing Remediation
Incorporating Vallourec ET technologyinto Casing Remediation systems allows
a bore size almost the same as the
corroded casing interval that needs repairfor production.
Case Off
Vallourec ET technology used in conjuntion with case off applications will allooperators to seal-off perforations to shoff water production.
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 19/124
Premium Services
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 20/124
Premium Services
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 21/124
Vallourec USA Corporation / Premium Services / pg.
Premium Services
Services for a Demanding
Industry
The Vallourec Group of companies offers
a comprehensive range of innovativesolutions in addition to premium OCTG
products. These solutions are designedto meet the most challenging needs, fromeducation and technical support to field
and repair services.
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 22/124
pg. 16 / Vallourec USA Corporation / Premium Services
Education
Qualify your team with best in classeducation on tubular products fromconception to completion. Vallourec’sExpert Instructors have high level con-
tent to choose from to offer tailor-madeprograms lasting anywhere from 2 to 5
days. Classes are offered in
Manufacturing Well Design Well Integrity Corrosion Running and Handling
Premium Connections Cost Optimization Safer Operations
In addition, participants of our most
popular class, Tubular Essentials, will begiven the chance to tour our rolling mill
located in Youngstown, Ohio as theylearn about the pipe manufacturing
process.
Well Design
Optimize your well design and enhanceyour well integrity. Our Technical groupcan help your business with materialselection, conventional / unconventional
casing design and advanced casingdesign using our knowledge in
Pipe and material manufacturing Corrosion (CO2 & H2S) HP/HT & deepwater R&D support VAM premium connections
If brought in early in the design processwe can help lower costs, increase safety
factors, optimize annular clearance, andchoose the best connections for theapplication.
Technical Support
A dedicated offer for your most demaning applications. Vallourec has dedicatR&D and test capacities for
Materials Corrosion Testing Connections Connection Qualification FEA Simulations
In addition, our group can help choo
and supply grades / connections for aenvironment.
Shale HP/HT Deepwater Corrosion High torque Riser
Vallourec’s global network of VAM® tec
nical experts and 24/7 access to wwvamservices.com and tech.supporvam-usa.com for questions answer
within one business day will help the j
get done when it counts.
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 23/124
Vallourec USA Corporation / Premium Services / pg.
Accessories Management
Vallourec Tube-Alloy offers a full rangeof tubing and casing accessories thatdelivers enhanced performance andproduction, including couplings, pup
joints, and a variety of connectors. Manyof these products are available from
stock in a wide array of sizes and styles,while others are made to order. From thesimplest J-55 API coupling to exotics
such as an Inconel Premium LandingNipple, Vallourec Tube-Alloy is the lead-
ing source for all accessory products.
Vallourec Tube-Alloy’s global stockingprogram provides products to all cornersof the globe while assuring customers of
timely, reliable delivery of quality prod-ucts every time.
Vallourec Tube-Alloy is able to provideproducts that meet or exceed customers’
expectations by continually producingnew innovations that save time and
money. A perfect example is the Flo-Pup®, which combines a pup joint and
flow coupling into one unit, reducing thenumber of threads, makeups and poten-tial leak paths.
Sales Offices
North America
South America
Europe
Africa Asia and Middle East
Steel Plants Manufacturing Plants Accessories and Repair VAM® Licensee Facilities VAM® Field Service Internatio
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 24/124
pg. 18 / Vallourec USA Corporation / Premium Services
Field Service
VAM®
Field Service technicians, com-prising more than 225 field specialistslocated around the world, ensure VAM® Premium Connections are used safely in
accordance with VAM® Field Proceduresand avoid any deviation that could be
detrimental to well life. VAM® FieldService adapts to your requirements andis available to maintain pipe integrity
across the supply chain with:
Rig-Ready/Rig-Return Pipeinspections
Supply chain and pipe yard support VAM® Make-up supervision at the
rig site Knowledge, training and tools required
to perform field repair Full range of rental service equipment
such as stabbing guides, lift plugs and
crossover subs for safety valves andcirculating heads
VAM® Assembly make-up supervisionand other specific services
In addition to VAM® Premium Connectionrunning experience, VAM® Field Servicehas accumulated over 25 years of valu-
able experience in many drilling andcompletion core competency areas
including:
Liner and hanger installations 13Cr and CRA completions HP/HT wells Shale Gas and Tight Gas wells Risers Glass re-enforced epoxy lined tubulars Slim wells (GRE) Solid expandable tubulars
Wireline strings requiring orientatedcouplings
Please remember that only VAM® service
personnel have been properly trained toinspect, repair and run VAM® Premium
Connections.
Repair Services
Ensure unique quality standards worwide for VAM® thread manufacturing amake-up. Any shop in the VAM® netwolicensed to cut or repair threads go
through regular audits to maintain qual At the customer’s request a Licens
Technical Representative (LTR) can assigned to an order to keep watch specific jobs. This translates into
assurance of quality and well integranytime VAM® threads are used on tu
ing, casing, and accessories.
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 25/124
Premium Connections
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 26/124
Premium Connections
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 27/124
Vallourec USA Corporation / Premium Connections / pg.
World Leader for Premium
Connections
Vallourec, through its affiliates VAM US
Vallourec Canada and Vallourec Mexicoffers the full range of VAM® products
North America. VAM®, the world leadfor premium connection solutions for toil and gas industry, benefits from
worldwide footprint of production facties, three leading edge Research
Development Technology centers and
network of over 200 licensees worldwid
Vallourec, in combination with VAM USoffers its customers integrated solutio
and services fully adapted to the requiments of a fast moving energy market.
VAM USA: an R&D Technolog
Center dedicated to North
America
The newly industrialized VAM USA R&Technology Center, located in Housto
Texas, encompasses an extensive arrof testing equipment used to simulaextreme well conditions. The No
America R&D center validates the qualand reliability of VAM® connectio
under field-like conditions per standaISO 13679 procedures and spec
customer procedures. In addition
qualification tests for customers, the lactively participates in the developme
of new connections and the validationnew products.
Premium Connections
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 28/124
pg. 20 / Vallourec USA Corporation / Premium Connections
The quest to find and recover new oil
and gas reserves has never been more
challenging. As these well conditions
become more hostile, VAM® is ever
more committed to designing connec-
tions suited for a variety of conditions
including:
Elevated Temperature Extreme Temperature fluctuations
(Steam Injection or SAGD) High Pressure / High Temperature
(HPHT) Sour Service Extreme Frac Pressures
High Torque Fatigue Loading Severe Dog legs
Your Challenge - Our
Commitment
VAM Premium Connections are used in
the most hostile environments and
applications. Operator safety, well life,
return on investment (onshore and off-
shore) rely on the quality of our prod-
ucts. Therefore, the performance of all
VAM connections are validated through
full scale psychical testing at one of our
three R&D centers to fully respond to
those requirements.
Sample Preparation
A critical component for the developmentand validation of new products is samplepreparation. VAM USA has incorporated
the latest FEA equipment, CNC lathesand gauges within the testing facility to
produce test specimens to the highesttolerances representing the worst case
scenarios in the field.
Make and Break
VAM USA can perform make up and
break out simulations that validate the
seal sensitivity and galling sensitivity ofVAM® premium connections under criti-cal conditions. VAM USA also uses thetongs to evaluate the dope sensitivity of
VAM® premium connections to new formulas of thread compound required by
our customers including environmental friendly “green dope” or “CLEANWELL™”.
Combined Loads (tension &
compression with internal
& external pressure)
The VAM USA load f
rames have a maximum tension capaci-
ty of 6 million pound force and a maxi-
mum compression capacity of 5.2 million
pound force. VAM USA has the ability tosimulate combined loads (tension or
compression) under high internal pres-
sure (30,000 psi using gas and 35,000
psi using water) or external pressure(35,000 psi).
Bending
VAM USA has testing equipment that csimulate combined loads with bendi(up to 70 degrees per 100ft).
Elevated Temperature
VAM USA can perform all simulations
ambient or elevated temperature (up 600°F) including thermal cycles (ambieto elevated temperature).
Fatigue Life
VAM USA can perform fatigue tests thare required to assess the fatigue life any VAM® premium connection (histresses / low cycles or low stresses
high cycles).
These extensive testing standar
provide assurance to our North Americ
customers that our premium connectiohave been physically tested beyond th
stated capabilities and secure VAM® the premier premium connection providworldwide.
The most important investment you c
make to ensure the successful running
your premium tubulars is a VAM® Fie
Service representative.
VAM USA Connection Technology Center: A comprehensive range of e quipment
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 29/124
Vallourec USA Corporation / Premium Connections / pg.
CONNECTIONVAM 21
TYPEThreaded & Coupled
SIZE RANGE5” to 14”(Tubing sizes currently being validated )
APPLICATIONS- Production casing- Intermediate casing
- Rotating liner- Rotation during cementation- Wells with extreme
compression loads
BENEFITS- Excellent gas-tight sealing
under combined loads- Reversed angle torque
shoulder provides excellentresistance to bending,compression and torque
- Seal protected from roughhandling
- Reduced drilling wear
susceptibility- Extreme compression andtorque resistance
RATINGS- ISO 13679 TESTEDInternal Pressure100%
External Pressure100%
Tension (% of Pipe Body)100%
Compression (% of Pipe Body)100%
OPTIONSHT – High TorqueCLEANWELL® DRYSB – Special BevelSC – Special Clearance
CONNECTIONVAM TOP
TYPEThreaded & Coupled
SIZE RANGE2 3/8” to 16”
APPLICATIONS - Production casing and tubing - Tie-backs - Intermediate casing
- Rotating liner - Rotation during cementation - Wells with extreme
compression loads
BENEFITS - Excellent gas-tight sealing
under combined loads - Reversed angle torque
shoulder provides excellentresistance to bending,compression and torque
- Thread geometry optimizedby size to minimize the riskof galling
- Connection options allowfor greater torque andcompression
RATINGSInternal Pressure100%
External Pressure100%
Tension (% of Pipe Body)100%
Compression (% of Pipe Body)Tubing 100%
Casing 60% - 100%
OPTIONSHC – High CompressionHT – High TorqueSB – Special BevelSC – Special ClearanceCLEANWELL® DRY
Threaded & Coupled
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 30/124
pg. 22 / Vallourec USA Corporation / Premium Connections
CONNECTIONVAM HP
TYPEThreaded & Coupled
SIZE RANGE7” to 11”
APPLICATIONS- Heavy wall casing for HPHT- Production liners- Tie-backs
- Casing hangers
BENEFITS- Dual gas-tight metal-to-metal
seals- Reversed angle torque
shoulder provides excellentresistance to bending,compression and torque
RATINGSInternal Pressure100%
External Pressure100%
Tension (% of Pipe Body)80% - 100%
Compression (% of Pipe Body)60%
OPTIONSSB – Special BevelSC – Special Clearance
CONNECTIONVAM HW-ST
TYPEThreaded & Coupled
SIZE RANGE5” to 14”
APPLICATIONS - Heavy wall casing for HPHT - Production liners - Tie-backs
- Casing hangers
BENEFITS - Excellent gas-tight sealing
under combined loads - Reversed angle torque
shoulder provides excellentresistance to bending,compression and torque
RATINGSInternal Pressure100%
External Pressure
70%Tension (% of Pipe Body)100%
Compression (% of Pipe Body)40%
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 31/124
Vallourec USA Corporation / Premium Connections / pg.
CONNECTIONDWC/C
TYPEThreaded & Coupled
SIZE RANGE3 1/2" to 13 3/8”
APPLICATIONS - Drilling with casing - Production casing - Tubing
BENEFITS - Pin-to-pin torque shoulder - Excellent torque, compression
and bending resistance - Improved thread sealing
compared to buttress - Fatigue enhancements for
drilling through a dogleg
RATINGSInternal Pressure100%
External Pressure100%
Tension (% of Pipe Body)100%
Compression (% of Pipe Body)Up to 100%
OPTIONSHT – High TorqueIS – Internal ShoulderSR – Seal RingPLUS – Larger Coupling
CONNECTIONBIG OMEGA
TYPEThreaded & Coupled
SIZE RANGE14” to 26”
APPLICATIONS - Surface casing
BENEFITS
- Coarse rugged three-pitchthread form - Excellent stabbing and
anti-cross threading - Improved thread sealing
compared to buttress
RATINGSInternal Pressure100%
External Pressure100%
Tension (% of Pipe Body)100%
Compression (% of Pipe Body)70%
Threaded & Coupled
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 32/124
pg. 24 / Vallourec USA Corporation / Premium Connections
CONNECTIONVAM SG
TYPESemi Flush
SIZE RANGE4 1/2" to 5 1/2”
APPLICATIONS - Production casing - Highly deviated wells - Long laterals
BENEFITS - Specifically tested for Shale
Well design applications - Gas-tight metal seal
protected by mid-shoulderfrom handling damage
- Deep stabbing two-stepthread
RATINGSInternal Pressure100%
External Pressure
70%Tension (% of Pipe Body)90%
Compression (% of Pipe Body)63%
CONNECTIONVAM SLIJ-II
TYPESemi Flush
SIZE RANGE4 1/2” to 16”
APPLICATIONS - Production casing - Intermediate casing - Drilling liners
- Drilling with casing - Tie-backs
BENEFITS - Optimized clearance with
high tensile efficiency - Dual gas-tight metal-to-metal
seals - Expanded box (2-3% over
nominal pipe OD) - Deep stabbing two-step thread RATINGSInternal Pressure100%
External Pressure100%
Tension (% of Pipe Body)68% - 82%
Compression (% of Pipe Body)47% - 57%
Semi-Flush
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 33/124
Vallourec USA Corporation / Premium Connections / pg.
CONNECTIONVAM HTF
TYPEFlush
SIZE RANGE4 1/2” to 9 7/8”
APPLICATIONS - Drilling liners - Drilling with casing - Production liners
- Rotation during cementation BENEFITS - Dual gas-tight metal-to-metal
seals - Maximum clearance – OD flush
with the pipe - Dovetail thread form for
extremely high torque capacity
RATINGSInternal Pressure100%
External Pressure
100%Tension (% of Pipe Body)58% - 67%
Compression (% of Pipe Body)35% - 40%
CONNECTIONVAM BOLT
TYPEFlush
SIZE RANGE11 7/8” to 18”
APPLICATIONS - Surface casing with tight
clearance requirements - Ideal for running inside
Big Bore wellhead systems
BENEFITS - Dual gas-tight metal-to-metal
seals - Dovetail thread form for
excellent jump-out resistance - Twin-lead thread for quick
makeup - Flush OD - External torque shoulder
RATINGSInternal Pressure100%
External Pressure100%
Tension (% of Pipe Body)52% - 64%
Compression (% of Pipe Body)52% - 64%
Flush
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 34/124
pg. 26 / Vallourec USA Corporation / Premium Connections
CONNECTIONST-L
TYPEFlush
SIZE RANGE2 3/8” to 14”
APPLICATIONS- Drilling liners- Moderate depth casing- Tight hole tubing strings
- Tie-backs
BENEFITS- Dual gas-tight metal-to-metal
seals- Twin-lead thread for fast
makeup- Maximum clearance –
OD flush with the pipe
RATINGSInternal Pressure100%
External Pressure
100%Tension (% of Pipe Body)45% - 70%
Compression (% of Pipe Body)27% - 42%
CONNECTIONHD-L
TYPEFlush
SIZE RANGE2 3/8” to 20”
APPLICATIONS - Drilling liners - Moderate depth casing - Tight hole tubing strings
- Tie-backs - Deviated wells with severecompression and bending
BENEFITS - Dual gas-tight metal-to-metal
seals - Single external metal seal
above 14” - Maximum clearance –
OD flush with the pipe - High compression rating RATINGSInternal Pressure
100%
External Pressure100%
Tension (% of Pipe Body)45% - 68%
Compression (% of Pipe Body)45% - 68%
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 35/124
Vallourec USA Corporation / Premium Connections / pg.
CONNECTIONVAM TOP FE
TYPEThreaded & Coupled
SIZE RANGE6 5/8” to 16”
APPLICATIONS - Drilling riser - Inner production riser
BENEFITS - VAM® TOP basis - Dovetail thread form for
- Gas tight internal metal tometal seal
- Rectangular thread profile - Fatigue enhancements - Swoosh - Radius on thread profile - SAF ≤ 2.0 vs. DNV-B1
2005 curve
PERFORMANCESStaticVAM® TOP basis
5 ~ 10 Make and Break
Internal Pressure100%
External Pressure100% API
Tension (% of Pipe Body)100%
Compression (% of Pipe Body)60%
Special Applications
CONNECTIONVAM SWI
TYPEThreaded & Coupled
SIZE RANGE4 1/2” to 13 3/8”
APPLICATIONS - Thermal wells - SAGD (Steam Assisted
Gravity Drainage)
- Other steam applications
BENEFITS - Gas tight seal under most
severe conditions - Excellent in heating and
cooling cycles - High torque rating - Enhanced make up
characteristics - Validated with full scale
thermal testing to industryrecognized test protocols
RATINGS
Internal Pressure100%
External Pressure100%
Tension (% of Pipe Body)100%
Compression (% of Pipe Body)100%
Thermal Riser
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 36/124
pg. 28/ Vallourec USA Corporation / Premium Connections
CONNECTIONVAM TTR
TYPEThreaded & Coupled
SIZE RANGE8 5/8” to 16”
APPLICATIONS - Outer production riser - Single barrier systems
BENEFITS - External metal to metal seal - High fatigue triangular
thread profile - SAF ≤ 1.5 vs. DNV-B1
2005 curve- Gas tight internal metal to
metal seal PERFORMANCESInternal Pressure100%
External Pressure100% API
Tension (% of Pipe Body)80% - 89%
Compression (% of Pipe Body)30 - 40%
OPTIONSHW - Heavy Wall
CONNECTIONLDR
TYPEThreaded & Coupled
SIZE RANGE7 5/8”
APPLICATIONS - Workover / Landing string /
Completion - HPHT
BENEFITS - External metal to metal seal - High fatigue triangular
thread profile - SAF ≤ 1.5 vs. DNV-B1
2005 curve- Gas tight internal metal to
metal seal - 25 Make and Breaks for work
over applications PERFORMANCES25 Make and Breaks forworkover applications
Internal Pressure100%
External Pressure100% API
Tension (% of Pipe Body)90%
Compression (% of Pipe Body)40%
Riser Grade Riser Grade
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 37/124
Vallourec USA Corporation / Premium Connections / pg.
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 38/124
pg. 30 / Vallourec USA Corporation / Premium Connections
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 39/124
Material Properties
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 40/124
Material Properties
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 41/124
Vallourec USA Corporation / Material Properties / pg.
Material Properties
Vallourec supplies the full range of API 5CT standard grades and grades with enhanced performances.
All Product Specification Levels (PSL) and Special Requirements (SR) from API 5CT/ISO 11960 can be delivered, with PSL 2standardized on all quenched and tempered grades.
a N80 Type 1 and N80Q (heat treated with additional criteria) are both available with the
same strength requirements and load ratings. Contact Vallourec Sales for additionalinformation.
b Mild Sour Service material tested in a fit for purpose solution at 90% AYS usingNACE method A.
Grade HRCYield Strength (ksi) Tensile Strength (ksi)
minimum minimummaximum
J55 55 80 75 -
K55 55 80 95 -
VST55 HC 70 110 110 -
N80 a 80 110 100 -
L80 80 95 95 ≤ 23.0
L80 HC 80 95 95 ≤ 23.0
L80 HCE 87.5 95 95 ≤ 23.0
L80 IRP 80 95 95 ≤ 23.0
L80 1Cr 80 95 95 ≤ 23.0
C90 90 105 100 ≤ 25.4
C90 HC 90 105 100 ≤ 25.4
R95 95 110 105 -
T95 95 110 105 ≤ 25.4
T95 HC 95 110 105 ≤ 25.4
T95 E 100 110 105 ≤ 25.4
T95 HCE 100 110 105 ≤ 25.4
C110 110 120 115 ≤ 30.0P110 MS b 110 125 125 ≤ 29.0
P110 110 140 125 -
P110 RY 110 125 125 -
P110 EC 125 140 135 -
P110 HCE 125 140 135 -
Q125 125 150 135 -
Q125 HC 125 150 135 -
Q125 HCE 135 150 140 -
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 42/124
pg. 32 / Vallourec USA Corporation / Material Properties
Vallourec Proprietary Grades Vallourec proprietary grades offer solutions for grades or requirements not covered
by API 5CT. They also offer greater performances (e.g. High Collapse grades) andhigher reliability (e.g. Sour Service grades) thanks to stringent internal requirements
quality and process control, mechanical properties and material testing.
High Pressure High Temperature HPHT grades are used when high strength is required with limited resistance to souservice conditions within the guidelines of NACE MR0175.
Grade HRC Operating temp. for use in sourservice conditions acc. to NACE
Yield Strength (ksi) Tensile Strength (ksi)
minimum minimummaximum
VM125CY 125 140 135 ≤ 35 175°F
VM130CY 130 140 135 ≤ 35 175°F
VM140CY 140 150 145 ≤ 36 225°F
Deep Well Deep well grades are used where high yield strength is required while maintaining
ductility and fracture toughness.
Grade CVN average value min. full size specimen at 70°F
Yield Strength (ksi) Tensile Strength (ksi)
minimum minimummaximum
VM140 140 165 150 38 ft-lbs
VM150 150 175 160 30 ft-lbs
Grade Collapseresistance
Yield Strength (ksi) Tensile Strength (ksi)
minimum minimummaximum
VM80HC 80 110 100
VM95HC 95 125 110
VM110HC 110 140 125
VM125HC 125 150 135
VM140HC 140 165 150
VM150HC 150 175 160
High Collapse High Collapse grades for casing are used in high pressure wells. They offer an
average of 25% and up to 40% extra performance over API collapse rating. As mechanical properties and pipe dimensions are major factors in collapse
resistance, the following parameters have been optimized to guarantee highcollapse pressure: D/t ratio, yield strength, ovality, wall thickness, residual stresses.
minimum guaranteedcollapse pressures
are available upon request
Material Properties
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 43/124
Vallourec USA Corporation / Material Properties / pg.
Sour Service Sour Service grades for tubing and casing are used in wells where H2S is present.
The threshold stresses have been determined according to Method A of NACETM0177 standard. Upon request sour service grades are also tested according to
Method D (DCB test).
High Collapse and Sour Service High Collapse and Sour Service grades for casing are used in high pressure wells
where H2S is present.
Grade HRC Threshold stress CollapseYield Strength (ksi) Tensile Strength (ksi)
minimum minimum minimum resistancemaximum
VM80HCS 80 95 95 ≤ 22 85% SMYS
VM80HCSS 80 95 95 ≤ 22 90% SMYS
VM90HCS 90 105 100 ≤ 24 85% SMYS
VM90HCSS 90 105 100 ≤ 24 90% SMYS
VM95HCS 95 110 105 ≤ 25 85% SMYS
VM95HCSS 95 110 105 ≤ 25 90% SMYS
VM110HCSS 110 120 115 ≤ 30 85% SMYS
VM125HCSS 125 135 130 ≤ 36 85% SMYS
minimum
guaranteed
collapse pressure
are available
upon request
Grade HRC Threshold stressYield Strength (ksi) Tensile Strength (ksi)
minimum minimum minimummaximum
VM80S 80 95 95 ≤ 22 85% SMYS
VM80SS 80 95 95 ≤ 22 90% SMYS
VM90S 90 105 100 ≤ 24 85% SMYS
VM90SS 90 105 100 ≤ 24 90% SMYS
VM95S 95 110 105 ≤ 25 85% SMYS
VM95SS 95 110 105 ≤ 25 90% SMYS
VM100SS 100 115 110 ≤ 28 85% SMYS
VM110SS 110 120 115 ≤ 30 85% SMYS
VM125SS 125 135 130 ≤ 34 85% SMYS (0.03 ppH2S, pH 3.5)
S Grades for faster delivery.
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 44/124
pg. 34 / Vallourec USA Corporation / Material Properties
Sweet Corrosion Martensitic grades (13Cr and Super 13Cr) are used in wells with CO2, chlorides andor some H2S up to 365°F.
Type Grade HRCYield Strength (ksi) Tensile Strength (ksi)
minimum minimummaximum
VM80 13CR 80 95 95 ≤ 23
13% Chrome VM85 13CR 85 100 100 ≤ 24
VM90 13CR 90 105 100 ≤ 26
VM95 13CR 95 110 105 ≤ 28
VM95 13CRSS 95 110 105 ≤ 30
Super 13% Chrome VM110 13CRSS 110 140 115 ≤ 34
VM125 13CRSS 125 140 130 ≤ 34
Highly Corrosive Ferritic-austenitic grades to be used in wells with CO2, chlorides and/or some H2S
to 480°F.
Type Grade HRCYield Strength (ksi) Tensile Strength (ksi)
minimum minimummaximum
VM22 110 110 140 115 ≤ 36
Duplex VM22 125 125 150 130 ≤ 37
VM22 140 140 160 145 ≤ 38
VM25 110 110 140 125 ≤ 36
Super VM25 125 125 150 130 ≤ 37Duplex VM25 140 140 160 145 ≤ 38
VM25S 125 125 150 130 ≤ 37
VM25S 140 140 160 145 ≤ 38
Austenitic grades are used in wells where high concentration of H2S, CO2,and chlorides are present.
Type Grade HRCYield Strength (ksi) Tensile Strength (ksi)
minimum minimummaximum
Super Austenitic VM28 110 110 140 115 ≤ 35VM28 125 125 150 130 ≤ 37
VM825 110 110 135 115 ≤ 35
VM825 120 120 145 125 ≤ 37
Nickel Base Alloys VM G3 110 110 130 115 ≤ 35
VM G3 125 125 145 130 ≤ 37
VM G50 110 110 130 115 ≤ 35
VM G50 125 125 145 130 ≤ 37
Material Properties
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 45/124
Vallourec USA Corporation / Material Properties / pg.
Special Applications
Risers Riser grades from 95 ksi to 125 ksi minimum yield strength are used in high fatigue
riser applications (available with Sour Service resistance).
Grade HRC Threshold stressYield Strength (ksi) Tensile Strength (ksi)
minimum minimum minimummaximum
VM95R 95 110 105 ≤ 33 N/A
VM95RSS 95 110 105 ≤ 27 80% SMYS
VM110R 110 125 120 ≤ 35 N/A
VM110RSS 110 120 115 ≤ 32 80% SMYS
VM125R 125 140 135 ≤ 37 N/A
Expandables Expandable grades from 50 ksi to 80 ksi minimum yield strength are used inexpandable tubular applications.
Grade Elongation 2”%
HRCYield Strengthksi
Ultimate Tensile Strengthksi
minimum minimum minimummaximum
VM50ET 50 65 69 25 25
VM80ET 80 95 95 20 20VM80 13ET 80 95 95 18 18
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 46/124
pg. 36 / Vallourec USA Corporation / Material Properties
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 47/124
Performance Data Tubing
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 48/124
Performance Data Tubing
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 49/124
Tubing Dimensions andMinimum Performance Properties
Vallourec USA Corporation / Performance Data / pg.
J55 8,100 7,700 7,600 8,250 7,880 72 7,700 49 7,700 72
K55 8,100 7,700 7,600 8,250 9,980 72 7,700 49 7,700 72
N80 11,780 11,200 11,060 12,000 10,630 104 11,200 72 11,200 104
L80 11,780 11,200 11,060 12,000 12,250 104 11,200 72 11,200 104
C90 13,250 12,600 12,440 13,500 12,960 117 12,600 81 12,600 117
R95 13,980 13,300 13,140 14,250 13,610 124 13,300 85 13,300 124
T95 13,980 13,300 13,140 14,250 13,640 124 13,300 85 13,300 124
P110 16,130 15,400 15,210 16,500 16,370 143 15,400 99 15,400 143
N80 15,280 14,970 14,640 15,640 14,470 135 14,970 103 14,850 135
L80 15,280 14,970 14,640 15,640 16,740 135 14,970 103 14,850 135
C90 17,190 16,840 16,470 17,590 17,710 152 16,840 116 16,710 152
R95 18,150 17,780 17,390 18,570 18,590 161 17,780 122 17,630 161
T95 18,150 17,780 17,390 18,570 18,640 161 17,780 122 17,630 161
P110 21,010 20,590 20,130 21,500 22,360 186 20,590 142 20,420 186
N80 17,410 17,390 16,870 17,860 17,010 154 - - - -
L80 17,410 17,390 16,870 17,860 19,720 154 - - - -
C90 19,580 19,560 18,980 20,090 20,860 173 - - - -
R95 20,670 20,650 20,040 21,210 21,900 183 - - - -
T95 20,670 20,650 20,040 21,210 21,960 183 - - - -
P110 23,930 23,910 23,200 24,560 26,340 212 - - - -
N80 19,430 19,810 19,050 20,000 19,600 172 - - 14,850 172
L80 19,430 19,810 19,050 20,000 22,790 172 - - 14,850 172
C90 21,860 22,280 21,430 22,500 24,100 194 - - 16,710 194
R95 23,080 23,520 22,620 23,750 25,310 204 - - 17,630 204
T95 23,080 23,520 22,620 23,750 25,370 204 - - 17,630 204
P110 26,720 27,230 26,190 27,500 30,430 237 - - 20,420 237
J55 7,680 7,260 7,180 7,820 7,410 100 7,260 73 7,260 100
K55 7,680 7,260 7,180 7,820 9,390 100 7,260 73 7,260 100
N80 11,170 10,570 10,450 11,370 10,000 145 10,570 106 10,570 145 L80 11,170 10,570 10,450 11,370 11,520 145 10,570 106 10,570 145
C90 12,380 11,890 11,760 12,790 12,190 163 11,890 119 11,890 163
R95 12,940 12,550 12,410 13,500 12,790 172 12,550 125 12,550 172
T95 12,940 12,550 12,410 13,500 12,830 172 12,550 125 12,550 172
P110 14,550 14,530 14,370 15,630 15,380 199 14,530 145 14,530 199
N80 13,890 13,440 13,200 14,190 12,900 180 13,440 141 13,440 180
L80 13,890 13,440 13,200 14,190 14,890 180 13,440 141 13,440 180
Abbreviated Terms
NU non-upset tubingEU external upset tubing ALT. alternate driftIP internal pressure
PBYS pipe body yield strength
4.60 4.70 4.44 0.190 1.304 1.901 N/A
5.80 5.95 5.76 0.254 1.692 1.773 N/A
6.60 - 6.56 0.295 1.928 1.691 N/A
7.35 7.45 7.32 0.336 2.152 1.609 N/A
6.40 6.50 6.17 0.217 1.812 2.347 N/A
7.80 7.90 7.67 0.276 2.254 2.229 N/A
2 3/8
2 7/8
ODConnectionsPipe Body
Grade
DriftWall AreaWeightCollapsePressure
IP(Barlow)
PBYS Non Upset (NU) Upset 8rd (EU
(psi)(in)(in) (in) (in)(in2 )(lb/ft)
NUT&C
EUT&C
PE API ALT.
(psi) (psi) (psi) (psi)
IP IP
(psi) (psi)(kips) (kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.Strength Jt.Stren
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 50/124
pg. 38 / Vallourec USA Corporation / Performance Data
Tubing Dimensions andMinimum Performance Properties
C90 15,620 15,120 14,850 15,960 15,760 203 15,120 158 15,120 203
R95 16,490 15,960 15,680 16,840 16,540 214 15,960 167 15,960 214
T95 16,490 15,960 15,680 16,840 16,580 214 15,960 167 15,960 214
P110 19,090 18,480 18,150 19,500 19,890 248 18,480 194 18,480 248
N80 15,300 15,000 14,670 15,660 14,500 199 15,000 159 14,940 199
L80 15,300 15,000 14,670 15,660 16,770 199 15,000 159 14,940 199
C90 17,220 16,870 16,500 17,620 17,740 224 16,870 179 16,810 224
R95 18,170 17,810 17,420 18,600 18,630 236 17,810 189 17,750 236
T95 18,170 17,810 17,420 18,600 18,680 236 17,810 189 17,750 236
P110 21,040 20,620 20,170 21,540 22,400 273 20,620 219 20,550 273
J55 7,400 6,990 6,910 7,540 7,110 142 6,990 109 6,990 142
K55 7,400 6,990 6,910 7,540 9,010 142 6,990 109 6,990 142
N80 10,540 10,160 10,060 10,960 9,600 207 10,160 159 10,160 207
L80 10,540 10,160 10,060 10,960 11,050 207 10,160 159 10,160 207
C90 11,570 11,430 11,310 12,330 11,690 233 11,430 179 11,430 233
R95 12,080 12,070 11,940 13,020 12,270 246 12,070 189 12,070 246
T95 12,080 12,070 11,940 13,020 12,300 246 12,070 189 12,070 246
P110 13,530 13,970 13,830 15,070 14,760 285 13,970 219 13,970 285
N80 12,120 11,560 11,410 12,360 11,000 233 11,560 185 - -
L80 12,120 11,560 11,410 12,360 12,670 233 11,560 185 - -
C90 13,640 13,010 12,830 13,900 13,410 262 13,010 208 - -
R95 14,390 13,730 13,550 14,670 14,080 277 13,730 220 - -
T95 14,390 13,730 13,550 14,670 14,110 277 13,730 220 - -
P110 16,670 15,900 15,690 16,990 16,930 321 15,900 255 - -
N80 15,310 15,000 14,670 15,660 14,500 295 15,000 246 15,000 295
L80 15,310 15,000 14,670 15,660 16,770 295 15,000 246 15,000 295
C90 17,220 16,880 16,500 17,620 17,740 331 16,880 277 16,880 331
R95 18,180 17,810 17,420 18,600 18,630 350 17,810 293 17,810 350
T95 18,180 17,810 17,420 18,600 18,680 350 17,810 293 17,810 350 P110 21,050 20,630 20,170 21,540 22,400 405 20,630 339 20,630 405
J55 5,110 5,440 5,400 5,960 5,480 147 5,440 99 - -
K55 5,110 5,440 5,400 5,960 6,940 147 5,440 99 - -
N80 6,590 7,910 7,860 8,660 7,400 214 7,910 144 - -
L80 6,590 7,910 7,860 8,660 8,490 214 7,910 144 - -
C90 7,080 8,900 8,840 9,740 8,990 241 8,900 162 - -
R95 7,310 9,390 9,340 10,290 9,440 255 9,390 171 - -
Abbreviated Terms
NU non-upset tubingEU external upset tubing ALT. alternate driftIP internal pressure
PBYS pipe body yield strength
7.80 7.90 7.67 0.276 2.254 2.229 N/A
8.60 8.70 8.45 0.308 2.484 2.165 N/A
9.20 9.30 8.81 0.254 2.590 2.867 N/A
10.20 - 9.92 0.289 2.915 2.797 N/A
12.70 12.95 12.53 0.375 3.682 2.625 N/A
9.50 - 9.12 0.226 2.680 3.423 N/A
2 7/8
3 1/2
4
ODConnectionsPipe Body
Grade
DriftWall AreaWeightCollapsePressure
IP(Barlow)
PBYS Non Upset (NU) Upset 8rd (EU
(psi)(in)(in) (in) (in)(in2 )(lb/ft)
NUT&C EUT&C PE API ALT.
(psi) (psi) (psi) (psi)
IP IP
(psi) (psi)(kips) (kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.Strength Jt.Stren
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 51/124
Tubing Dimensions andMinimum Performance Properties
Vallourec USA Corporation / Performance Data / pg.
T95 7,310 9,390 9,340 10,290 9,460 255 9,390 171 - -
P110 7,910 10,880 10,810 11,910 11,350 295 10,880 198 - -
J55 6,590 6,300 6,250 6,850 6,390 169 - - 6,300 169
N80 8,800 9,170 9,090 9,960 8,620 246 - - 9,170 246
L80 8,800 9,170 9,090 9,960 9,920 246 - - 9,170 246
C90 9,590 10,320 10,230 11,200 10,490 277 - - 10,320 277
R95 9,980 10,890 10,800 11,830 11,020 292 - - 10,890 292
T95 9,980 10,890 10,800 11,830 11,040 292 - - 10,890 292
P110 11,060 12,610 12,500 13,690 13,250 338 - - 12,610 338
N80 12,110 11,550 11,400 12,350 10,990 304 - - - -
L80 12,110 11,550 11,400 12,350 12,660 304 - - - -
C90 13,620 12,990 12,820 13,890 13,390 342 - - - -
R95 14,380 13,720 13,530 14,660 14,060 361 - - - -
T95 14,380 13,720 13,530 14,660 14,100 361 - - - -
P110 16,650 15,880 15,670 16,980 16,910 419 - - - -
J55 5,730 5,800 5,760 6,330 5,850 198 5,800 144 5,800 198
K55 5,730 5,800 5,760 6,330 7,410 198 5,800 144 5,800 198
N80 7,500 8,430 8,370 9,200 7,900 288 8,430 209 8,430 288
L80 7,500 8,430 8,370 9,200 9,080 288 8,430 209 8,430 288
C90 8,120 9,490 9,420 10,350 9,610 324 9,490 235 9,490 324
R95 8,410 10,010 9,940 10,930 10,090 342 10,010 248 10,010 342
T95 8,410 10,010 9,940 10,930 10,110 342 10,010 248 10,010 342
P110 9,210 11,590 11,510 12,650 12,130 396 11,590 287 11,590 396
N80 11,080 10,480 10,370 11,290 9,920 353 - - - -
L80 11,080 10,480 10,370 11,290 11,420 353 - - - -
C90 12,220 11,800 11,670 12,700 12,080 397 - - - -
R95 12,760 12,450 12,310 13,400 12,690 419 - - - -
T95 12,760 12,450 12,310 13,400 12,720 419 - - - -
P110 14,340 14,420 14,260 15,520 15,260 485 - - - -
10.70 11.00 10.47 0.262 3.077 3.351 N/A
13.20 - 12.95 0.330 3.805 3.215 N/A
12.60 12.75 12.25 0.271 3.600 3.833 N/A
15.20 - 15.00 0.337 4.407 3.701 N/A
9.50 - 9.12 0.226 2.680 3.423 N/A
4
4 1/2
Abbreviated Terms
NU non-upset tubingEU external upset tubing ALT. alternate driftIP internal pressurePBYS pipe body yield strength
ODConnectionsPipe Body
Grade
DriftWall AreaWeightCollapsePressure
IP(Barlow)
PBYS Non Upset (NU) Upset 8rd (EU
(psi)(in)(in) (in) (in)(in2 )(lb/ft)
NUT&C EUT&C PE API ALT.
(psi) (psi) (psi) (psi)
IP IP
(psi) (psi)(kips) (kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.Strength Jt.Stren
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 52/124
Tubing Dimensions andMinimum Performance Properties
Vallourec USA Corporation / Performance Data / pg.
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 53/124
Performance Data
4 1/2” - 7”
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 54/124
Performance Data4 1/2" - 7"
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 55/124
Vallourec USA Corporation / Performance Data 4 1/2” -7” / pg.
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
4 1/2 9.50 9.41 0.205 2.766 3.965 N/A
4 1/2 10.50 10.24 0.224 3.009 3.927 N/A
4 1/2 11.60 10.24 0.224 3.009 3.927 N/A
4 1/2 12.75 12.25 0.271 3.600 3.833 N/A
J55 3,310 4,380 4,370 4,850 4,400 152 4,380 101 - - - -
K55 3,310 4,380 4,370 4,850 5,570 152 4,380 112 - - - -
J55 4,010 4,790 4,770 5,280 4,820 166 4,790 132 - - 4,790 20
K55 4,010 4,790 4,770 5,280 6,100 166 4,790 146 - - 4,790 24
J55 4,960 5,350 5,320 5,860 5,400 184 5,350 154 5,350 162 5,350 22
K55 4,960 5,350 5,320 5,860 6,840 184 5,350 170 5,350 180 5,350 27
N80 6,360 7,780 7,730 8,520 7,290 267 7,780 216 7,780 223 7,780 30
L80 6,360 7,780 7,730 8,520 8,370 267 7,780 212 7,780 212 7,780 29
L80 1Cr 6,360 7,780 7,730 8,520 8,370 267 7,780 212 7,780 212 7,780 29
L80 HC 7,720 7,780 7,730 8,520 8,370 267 7,780 212 7,780 212 7,780 29
L80 IRP 6,360 7,780 7,730 8,520 8,370 267 7,780 212 7,780 212 7,780 29
L80 HCE 7,720 8,510 8,460 9,320 8,370 292 8,510 212 8,510 212 8,510 29
C90 6,810 8,750 8,700 9,590 9,730 300 8,750 223 8,750 223 8,750 30
R95 7,030 9,240 9,180 10,120 9,310 317 9,240 234 9,240 234 9,240 32
T95 7,030 9,240 9,180 10,120 10,280 317 9,240 234 9,240 234 9,240 32
T95 HC 8,550 9,240 9,180 10,120 10,280 317 9,240 234 9,240 234 9,240 32
T95 E 7,030 9,720 9,660 10,660 10,280 334 9,720 234 9,720 234 9,720 32
T95 HCE 8,550 9,720 9,660 10,660 10,280 334 9,720 234 9,720 234 9,720 32
P110 7,580 10,690 10,630 11,720 11,150 367 10,690 279 10,690 279 10,690 38
P110 RY 7,580 10,690 10,630 11,720 11,150 367 10,690 279 10,690 279 10,690 38
P110 MS 7,580 10,690 10,630 11,720 11,150 367 10,690 279 10,690 279 10,690 38
P110 EC 8,860 12,150 12,080 13,320 13,380 417 12,150 301 12,150 301 12,150 42
P110 HCE 9,590 12,150 12,080 13,320 13,380 417 12,150 301 12,150 301 12,150 42
Q125 8,000 12,150 12,080 13,320 13,380 417 12,150 301 12,150 301 12,150 42
Q125 HC 9,870 12,150 12,080 13,320 13,380 417 12,150 301 12,150 301 12,150 42
Q125 HCE 9,870 13,130 13,050 14,390 13,960 451 13,130 312 13,130 312 13,130 43
N80 7,500 8,430 8,370 9,200 7,690 288 - - - - - -
L80 7,500 8,430 8,370 9,200 7,690 288 - - - - - -
L80 IRP 7,500 8,430 8,370 9,200 7,690 288 - - - - - - C90 8,120 9,490 9,420 10,350 10,540 324 - - - - - -
R95 8,410 10,010 9,940 10,930 10,000 342 - - - - - -
T95 8,410 10,010 9,940 10,930 11,140 342 - - - - - -
T95 E 8,410 10,540 10,460 11,500 11,140 360 - - - - - -
P110 9,210 11,590 11,510 12,650 13,340 396 - - - - - -
P110 RY 9,210 11,590 11,510 12,650 13,340 396 - - - - - -
P110 MS 9,210 11,590 11,510 12,650 13,340 396 - - - - - -
Casing Dimensions andMinimum Performance Properties
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 56/124
Casing Dimensions andMinimum Performance Properties
pg. 42 / Vallourec USA Corporation / Performance Data 4 1/2” -7”
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JStreIPIP IP
P110 EC 9,890 13,170 13,080 14,380 14,410 450 - - - - - -
Q125 9,890 13,170 13,080 14,380 14,410 450 - - - - - -
N80 8,540 9,020 8,950 9,810 8,500 307 - - 9,020 270 9,020 34
L80 8,540 9,020 8,950 9,810 9,780 307 - - 9,020 257 9,020 33
L80 1Cr 8,540 9,020 8,950 9,810 9,780 307 - - 9,020 257 9,020 33
L80 HC 9,560 9,020 8,950 9,810 9,780 307 - - 9,020 257 9,020 33
L80 IRP 8,540 9,020 8,950 9,810 9,780 307 - - 9,020 257 9,020 33
L80 HCE 9,560 9,870 9,790 10,730 9,780 336 - - 9,870 257 9,870 33
C90 9,300 10,150 10,070 11,030 11,380 345 - - 10,150 270 10,150 35
R95 9,660 10,710 10,630 11,650 10,870 364 - - 10,710 284 10,710 37
T95 9,660 10,710 10,630 11,650 12,020 364 - - 10,710 284 10,710 37
T95 HC 10,850 10,710 10,630 11,650 12,020 364 - - 10,710 284 10,710 37
T95 E 9,660 11,280 11,190 12,260 12,020 384 - - 11,280 284 11,280 37
T95 HCE 10,850 11,280 11,190 12,260 12,020 384 - - 11,280 284 11,280 37
P110 10,690 12,410 12,310 13,490 14,400 422 - - 12,410 338 12,410 44
P110 RY 10,690 12,410 12,310 13,490 14,400 422 - - 12,410 338 12,410 44
P110 MS 10,690 12,410 12,310 13,490 14,400 422 - - 12,410 338 12,410 44
P110 EC 11,600 14,100 13,980 15,320 15,640 479 - - 14,100 365 14,100 48
P110 HCE 12,840 14,100 13,980 15,320 15,640 479 - - 14,100 365 14,100 48
C110 10,690 12,410 12,310 13,490 13,250 422 - - 12,410 311 12,410 41
Q125 11,600 14,100 13,980 15,320 15,640 479 - - 14,100 365 14,100 48
Q125 HC 13,810 14,100 13,980 15,320 15,640 479 - - 14,100 365 14,100 48
Q125 HCE 13,810 15,230 15,100 16,550 16,320 518 - - 15,230 378 15,230 50
N80 11,080 10,480 10,370 11,290 9,950 353 - - 10,480 325 9,790 40
L80 11,080 10,480 10,370 11,290 11,450 353 - - 10,480 308 9,790 38
L80 1Cr 11,080 10,480 10,370 11,290 11,450 353 - - 10,480 308 9,790 38
L80 HC 11,950 10,480 10,370 11,290 11,450 353 - - 10,480 308 9,790 38
L80 IRP 11,080 10,480 10,370 11,290 11,450 353 - - 10,480 308 9,790 38
L80 HCE 11,950 11,470 11,340 12,350 11,450 386 - - 11,470 308 10,710 38 C90 12,220 11,800 11,670 12,700 13,340 397 - - 11,800 325 11,020 40
R95 12,760 12,450 12,310 13,400 12,740 419 - - 12,450 341 11,630 42
T95 12,760 12,450 12,310 13,400 14,100 419 - - 12,450 341 11,630 42
T95 HC 13,300 12,450 12,310 13,400 14,100 419 - - 12,450 341 11,630 42
T95 E 12,760 13,110 12,960 14,110 14,100 441 - - 13,110 341 12,240 43
T95 HCE 13,300 13,110 12,960 14,110 14,100 441 - - 13,110 341 12,240 43
P110 14,340 14,420 14,260 15,520 16,880 485 - - 14,420 406 13,470 50
4 1/2 12.75 12.25 0.271 3.600 3.833 N/A
4 1/2 13.50 13.05 0.290 3.836 3.795 N/A
4 1/2 15.10 15.00 0.337 4.407 3.701 N/A
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 57/124
Casing Dimensions andMinimum Performance Properties
Vallourec USA Corporation / Performance Data 4 1/2” -7” / pg.
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
4 1/2 15.10 15.00 0.337 4.407 3.701 N/A
4 1/2 16.60 16.54 0.375 4.860 3.625 N/A
4 1/2 21.50 21.38 0.500 6.283 3.375 N/A
P110 RY 14,340 14,420 14,260 15,520 16,880 485 - - 14,420 406 13,470 50
P110 MS 14,340 14,420 14,260 15,520 16,880 485 - - 14,420 406 13,470 50
P110 EC 15,830 16,380 16,200 17,640 18,350 551 - - 16,380 438 15,300 55
P110 HCE 16,090 16,380 16,200 17,640 18,350 551 - - 16,380 438 15,300 55
C110 14,340 14,420 14,260 15,520 15,530 485 - - 14,420 373 13,470 47
Q125 15,830 16,380 16,200 17,640 18,350 551 - - 16,380 438 15,300 55
Q125 HC 17,330 16,380 16,200 17,640 18,350 551 - - 16,380 438 15,300 55
Q125 HCE 17,330 17,690 17,500 19,050 19,140 595 - - 17,690 454 16,530 57
N80 12,220 11,670 11,510 12,460 11,130 389 - - - - - -
L80 12,220 11,670 11,510 12,460 12,830 389 - - - - - -
L80 1Cr 12,220 11,670 11,510 12,460 12,830 389 - - - - - -
L80 HC 13,370 11,670 11,510 12,460 12,830 389 - - - - - -
L80 IRP 12,220 11,670 11,510 12,460 12,830 389 - - - - - -
L80 HCE 13,370 12,760 12,590 13,630 12,830 425 - - - - - -
C90 13,750 13,130 12,950 14,020 14,960 437 - - - - - -
R95 14,510 13,850 13,670 14,800 14,270 462 - - - - - -
T95 14,510 13,850 13,670 14,800 15,800 462 - - - - - -
T95 HC 15,280 13,850 13,670 14,800 15,800 462 - - - - - -
T95 E 14,510 14,580 14,390 15,580 15,800 486 - - - - - -
T95 HCE 15,280 14,580 14,390 15,580 15,800 486 - - - - - -
P110 16,810 16,040 15,830 17,130 18,930 535 - - - - - -
P110 RY 16,810 16,040 15,830 17,130 18,930 535 - - - - - -
P110 MS 16,810 16,040 15,830 17,130 18,930 535 - - - - - -
P110 EC 17,710 18,230 17,980 19,470 20,570 607 - - - - - -
P110 HCE 19,100 18,230 17,980 19,470 20,570 607 - - - - - -
C110 16,810 16,040 15,830 17,130 17,410 535 - - - - - -
Q125 19,100 18,230 17,980 19,470 20,570 607 - - - - - -
Q125 HC 20,510 18,230 17,980 19,470 20,570 607 - - - - - -
Q125 HCE 20,510 19,690 19,420 21,030 21,460 656 - - - - - - N80 13,830 13,380 13,140 14,130 12,870 440 - - - - - -
L80 13,830 13,380 13,140 14,130 14,860 440 - - - - - -
L80 1Cr 13,830 13,380 13,140 14,130 14,860 440 - - - - - -
L80 HC 15,170 13,380 13,140 14,130 14,860 440 - - - - - -
L80 IRP 13,830 13,380 13,140 14,130 14,860 440 - - - - - -
L80 HCE 15,170 14,630 14,370 15,450 14,860 481 - - - - - -
C90 15,560 15,050 14,780 15,890 17,340 495 - - - - - -
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 58/124
Casing Dimensions andMinimum Performance Properties
pg. 44 / Vallourec USA Corporation / Performance Data 4 1/2” -7”
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
4 1/2 18.90 18.71 0.430 5.498 3.515 N/A
4 1/2 21.50 21.38 0.500 6.283 3.375 N/A
5 15.00 14.88 0.296 4.374 4.283 N/A
R95 16,420 15,890 15,610 16,770 16,520 522 - - - - - -
T95 16,420 15,890 15,610 16,770 18,320 522 - - - - - -
T95 HC 17,560 15,890 15,610 16,770 18,320 522 - - - - - -
T95 E 16,420 16,720 16,430 17,660 18,320 550 - - - - - -
T95 HCE 17,560 16,720 16,430 17,660 18,320 550 - - - - - -
P110 19,010 18,390 18,070 19,420 21,940 605 - - - - - -
P110 RY 19,010 18,390 18,070 19,420 21,940 605 - - - - - -
P110 MS 19,010 18,390 18,070 19,420 21,940 605 - - - - - -
P110 EC 21,610 20,900 20,530 22,070 23,840 687 - - - - - -
P110 HCE 21,730 20,900 20,530 22,070 23,840 687 - - - - - -
C110 19,010 18,390 18,070 19,420 20,190 605 - - - - - -
Q125 21,610 20,900 20,530 22,070 23,840 687 - - - - - -
Q125 HC 23,370 20,900 20,530 22,070 23,840 687 - - - - - -
Q125 HCE 23,370 22,580 22,180 23,840 24,880 742 - - - - - -
N80 15,800 15,560 15,180 16,180 15,120 503 - - - - - -
L80 15,800 15,560 15,180 16,180 17,500 503 - - - - - -
L80 1Cr 15,800 15,560 15,180 16,180 17,500 503 - - - - - -
L80 HC 17,900 15,560 15,180 16,180 17,500 503 - - - - - -
L80 IRP 15,800 15,560 15,180 16,180 17,500 503 - - - - - -
L80 HCE 17,900 17,010 16,610 17,700 17,500 550 - - - - - -
C90 17,780 17,500 17,080 18,210 20,450 565 - - - - - -
R95 18,770 18,470 18,030 19,220 19,460 597 - - - - - -
T95 18,770 18,470 18,030 19,220 21,600 597 - - - - - -
T95 HC 20,750 18,470 18,030 19,220 21,600 597 - - - - - -
T95 E 18,770 19,440 18,980 20,230 21,600 628 - - - - - -
T95 HCE 20,750 19,440 18,980 20,230 21,600 628 - - - - - -
P110 21,730 21,390 20,880 22,250 25,870 691 - - - - - -
P110 RY 21,730 21,390 20,880 22,250 25,870 691 - - - - - -
P110 MS 21,730 21,390 20,880 22,250 25,870 691 - - - - - - P110 EC 24,690 24,310 23,730 25,280 28,120 785 - - - - - -
P110 HCE 25,700 24,310 23,730 25,280 28,120 785 - - - - - -
C110 21,730 21,390 20,880 22,250 23,800 691 - - - - - -
Q125 24,690 24,310 23,730 25,280 28,120 785 - - - - - -
Q125 HC 27,780 24,310 23,730 25,280 28,120 785 - - - - - -
Q125 HCE 27,780 26,250 25,620 27,310 29,340 848 - - - - - -
J55 5,560 5,700 5,660 6,220 5,770 241 5,700 207 5,700 223 5,700 29
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 59/124
Casing Dimensions andMinimum Performance Properties
Vallourec USA Corporation / Performance Data 4 1/2” -7” / pg.
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
5 15.00 14.88 0.296 4.374 4.283 N/A
5 18.00 17.95 0.362 5.275 4.151 N/A
K55 5,560 5,700 5,660 6,220 7,300 241 5,700 228 5,700 246 5,700 35
N80 7,250 8,290 8,230 9,050 7,780 350 8,290 291 8,290 311 8,290 39
L80 7,250 8,290 8,230 9,050 8,940 350 8,290 286 8,290 295 8,290 37
L80 1Cr 7,250 8,290 8,230 9,050 8,940 350 8,290 286 8,290 295 8,290 37
L80 HC 8,510 8,290 8,230 9,050 8,940 350 8,290 286 8,290 295 8,290 37
L80 IRP 7,250 8,290 8,230 9,050 8,940 350 8,290 286 8,290 295 8,290 37
L80 HCE 8,510 9,070 9,000 9,900 8,940 383 9,070 295 9,070 295 9,070 38
C90 7,830 9,320 9,260 10,190 10,400 394 9,320 311 9,320 311 9,320 40
R95 8,110 9,840 9,780 10,750 9,950 416 9,840 326 9,840 326 9,840 42
T95 8,110 9,840 9,780 10,750 10,990 416 9,840 326 9,840 326 9,840 424
T95 HC 9,540 9,840 9,780 10,750 10,990 416 9,840 326 9,840 326 9,840 42
T95 E 8,110 10,360 10,290 11,320 10,990 437 10,360 326 10,360 326 10,360 42
T95 HCE 9,540 10,360 10,290 11,320 10,990 437 10,360 326 10,360 326 10,360 42
P110 8,850 11,400 11,320 12,450 13,170 481 11,400 387 11,400 388 11,400 50
P110 RY 8,850 11,400 11,320 12,450 13,170 481 11,400 387 11,400 388 11,400 50
P110 MS 8,850 11,400 11,320 12,450 13,170 481 11,400 387 11,400 388 11,400 50
P110 EC 9,480 12,950 12,860 14,150 14,310 547 12,950 420 12,950 420 12,950 54
P110 HCE 10,970 12,950 12,860 14,150 14,310 547 12,950 420 12,950 420 12,950 54
Q125 9,480 12,950 12,860 14,150 14,310 547 12,950 420 12,950 420 12,950 54
Q125 HC 11,400 12,950 12,860 14,150 14,310 547 12,950 420 12,950 420 12,950 54
Q125 HCE 11,400 13,990 13,890 15,280 14,930 591 13,990 435 13,990 435 13,990 57
N80 10,500 10,140 10,030 10,940 9,600 422 - - 10,140 396 9,910 47
L80 10,500 10,140 10,030 10,940 11,050 422 - - 10,140 376 9,910 45
L80 1Cr 10,500 10,140 10,030 10,940 11,050 422 - - 10,140 376 9,910 45
L80 HC 11,400 10,140 10,030 10,940 11,050 422 - - 10,140 376 9,910 45
L80 IRP 10,500 10,140 10,030 10,940 11,050 422 - - 10,140 376 9,910 45
L80 HCE 11,400 11,090 10,970 11,960 11,050 462 - - 11,090 376 10,840 46
C90 11,520 11,400 11,290 12,310 12,870 475 - - 11,400 396 11,150 48
R95 12,020 12,040 11,910 12,990 12,290 501 - - 12,040 416 11,770 51 T95 12,020 12,040 11,910 12,990 13,600 501 - - 12,040 416 11,770 51
T95 HC 12,670 12,040 11,910 12,990 13,600 501 - - 12,040 416 11,770 51
T95 E 12,020 12,670 12,540 13,670 13,600 527 - - 12,670 416 12,390 51
T95 HCE 12,670 12,670 12,540 13,670 13,600 527 - - 12,670 416 12,390 51
P110 13,470 13,940 13,800 15,040 16,290 580 - - 13,940 495 13,630 60
P110 RY 13,470 13,940 13,800 15,040 16,290 580 - - 13,940 495 13,630 60
P110 MS 13,470 13,940 13,800 15,040 16,290 580 - - 13,940 495 13,630 60
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 60/124
Casing Dimensions andMinimum Performance Properties
pg. 46 / Vallourec USA Corporation / Performance Data 4 1/2” -7”
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
5 18.00 17.95 0.362 5.275 4.151 N/A
5 21.40 21.32 0.437 6.264 4.001 N/A
5 23.20 23.11 0.478 6.791 3.919 N/A
P110 EC 14,820 15,840 15,680 17,090 17,700 659 - - 15,840 535 15,490 66
P110 HCE 15,360 15,840 15,680 17,090 17,700 659 - - 15,840 535 15,490 66
C110 13,470 13,940 13,800 15,040 14,980 580 - - 13,940 456 13,630 56
Q125 14,820 15,840 15,680 17,090 17,700 659 - - 15,840 535 15,490 66
Q125 HC 15,670 15,840 15,680 17,090 17,700 659 - - 15,840 535 15,490 66
Q125 HCE 15,670 17,100 16,930 18,460 18,470 712 - - 15,990 555 16,730 69
N80 12,760 12,240 12,060 13,020 11,710 501 - - 10,810 490 9,910 53
L80 12,760 12,240 12,060 13,020 13,500 501 - - 10,810 466 9,910 51
L80 1Cr 12,760 12,240 12,060 13,020 13,500 501 - - 10,810 466 9,910 51
L80 HC 13,960 12,240 12,060 13,020 13,500 501 - - 10,810 466 9,910 51
L80 IRP 12,760 12,240 12,060 13,020 13,500 501 - - 10,810 466 9,910 51
L80 HCE 13,960 13,380 13,190 14,240 13,500 548 - - 11,830 466 10,840 51
C90 14,360 13,770 13,560 14,650 15,740 564 - - 12,170 490 11,150 53
R95 15,150 14,530 14,320 15,460 15,010 595 - - 12,840 515 11,770 56
T95 15,150 14,530 14,320 15,460 16,630 595 - - 12,840 515 11,770 56
T95 HC 15,950 14,530 14,320 15,460 16,630 595 - - 12,840 515 11,770 56
T95 E 15,150 15,300 15,070 16,270 16,630 626 - - 13,520 515 12,390 56
T95 HCE 15,950 15,300 15,070 16,270 16,630 626 - - 13,520 515 12,390 56
P110 17,550 16,820 16,580 17,900 19,920 689 - - 14,870 613 13,630 67
P110 RY 17,550 16,820 16,580 17,900 19,920 689 - - 14,870 613 13,630 67
P110 MS 17,550 16,820 16,580 17,900 19,920 689 - - 14,870 613 13,630 67
P110 EC 19,940 19,120 18,840 20,340 21,650 783 - - 15,990 662 15,490 72
P110 HCE 20,100 19,120 18,840 20,340 21,650 783 - - 15,990 662 15,490 72
C110 17,550 16,820 16,580 17,900 18,330 689 - - 14,870 564 13,630 61
Q125 19,940 19,120 18,840 20,340 21,650 783 - - 15,990 662 15,490 72
Q125 HC 21,540 19,120 18,840 20,340 21,650 783 - - 15,990 662 15,490 72
Q125 HCE 21,540 20,650 20,340 21,970 22,590 846 - - 15,990 686 16,730 75
N80 13,830 13,380 13,150 14,130 12,870 543 - - 10,810 540 9,910 53
L80 13,830 13,380 13,150 14,130 14,870 543 - - 10,810 513 9,910 51 L80 1Cr 13,830 13,380 13,150 14,130 14,870 543 - - 10,810 513 9,910 51
L80 HC 15,130 13,380 13,150 14,130 14,870 543 - - 10,810 513 9,910 51
L80 IRP 13,830 13,380 13,150 14,130 14,870 543 - - 10,810 513 9,910 51
L80 HCE 15,130 14,640 14,380 15,460 14,870 594 - - 11,830 513 10,840 51
C90 15,560 15,060 14,790 15,900 17,350 611 - - 12,170 540 11,150 53
R95 16,430 15,890 15,610 16,780 16,530 645 - - 12,840 567 11,770 56
T95 16,430 15,890 15,610 16,780 18,330 645 - - 12,840 567 11,770 56
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 61/124
Casing Dimensions andMinimum Performance Properties
Vallourec USA Corporation / Performance Data 4 1/2” -7” / pg.
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
5 23.20 23.11 0.478 6.791 3.919 N/A
5 1/2 15.50 15.36 0.275 4.514 4.825 N/A
5 24.10 24.05 0.500 7.069 3.875 N/A
5 1/2 17.00 16.89 0.304 4.962 4.767 N/A
T95 HC 17,570 15,890 15,610 16,780 18,330 645 - - 12,840 567 11,770 56
T95 E 16,430 16,730 16,430 17,660 18,330 679 - - 13,520 567 12,390 56
T95 HCE 17,570 16,730 16,430 17,660 18,330 679 - - 13,520 567 12,390 56
P110 19,020 18,400 18,080 19,430 21,950 747 - - 14,870 675 13,630 67
P110 RY 19,020 18,400 18,080 19,430 21,950 747 - - 14,870 675 13,630 67
P110 MS 19,020 18,400 18,080 19,430 21,950 747 - - 14,870 675 13,630 67
P110 EC 21,840 20,910 20,540 22,080 23,860 849 - - 15,990 729 15,490 72
P110 HCE 22,340 20,910 20,540 22,080 23,860 849 - - 15,990 729 15,490 72
C110 19,020 18,400 18,080 19,430 20,200 747 - - 14,870 621 13,630 61
Q125 21,620 20,910 20,540 22,080 23,860 849 - - 15,990 729 15,490 72
Q125 HC 23,340 20,910 20,540 22,080 23,860 849 - - 15,990 729 15,490 72
Q125 HCE 23,340 22,590 22,190 23,850 24,890 917 - - 15,990 756 16,730 75
N80 14,400 14,000 13,730 14,720 13,510 565 - - 10,810 567 9,910 53
L80 14,400 14,000 13,730 14,720 15,610 565 - - 10,810 538 9,910 51
L80 1Cr 14,400 14,000 13,730 14,720 15,610 565 - - 10,810 538 9,910 51
L80 HC 15,750 14,000 13,730 14,720 15,610 565 - - 10,810 538 9,910 51
L80 IRP 14,400 14,000 13,730 14,720 15,610 565 - - 10,810 538 9,910 51
L80 HCE 15,750 15,310 15,020 16,100 15,610 619 - - 11,830 538 10,840 51
C90 16,200 15,750 15,450 16,560 18,220 636 - - 12,170 567 11,150 53
R95 17,100 16,630 16,300 17,480 17,360 672 - - 12,840 595 11,770 56
T95 17,100 16,630 16,300 17,480 19,250 672 - - 12,840 595 11,770 56
T95 HC 18,470 16,630 16,300 17,480 19,250 672 - - 12,840 595 11,770 56
T95 E 17,100 17,500 17,160 18,400 19,250 707 - - 13,520 595 12,390 56
T95 HCE 18,470 17,500 17,160 18,400 19,250 707 - - 13,520 595 12,390 56
P110 19,800 19,250 18,880 20,240 23,050 778 - - 14,870 708 13,630 67
P110 RY 19,800 19,250 18,880 20,240 23,050 778 - - 14,870 708 13,630 67
P110 MS 19,800 19,250 18,880 20,240 23,050 778 - - 14,870 708 13,630 67
P110 EC 22,500 21,880 21,450 23,000 25,050 884 - - 15,990 765 15,490 72
P110 HCE 23,140 21,880 21,450 23,000 25,050 884 - - 15,990 765 15,490 72 C110 19,800 19,250 18,880 20,240 21,210 778 - - 14,870 652 13,630 61
Q125 22,500 21,880 21,450 23,000 25,050 884 - - 15,990 765 15,490 72
Q125 HC 24,300 21,880 21,450 23,000 25,050 884 - - 15,990 765 15,490 72
Q125 HCE 24,300 23,630 23,170 24,840 26,140 954 - - 15,990 793 16,730 75
J55 4,040 4,810 4,790 5,300 4,840 248 4,810 202 4,810 217 4,810 30
K55 4,040 4,810 4,790 5,300 6,130 248 4,810 222 4,810 239 4,810 36
J55 4,910 5,320 5,290 5,830 5,370 273 5,320 229 5,320 247 5,320 32
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 62/124
Casing Dimensions andMinimum Performance Properties
pg. 48 / Vallourec USA Corporation / Performance Data 4 1/2” -7”
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
5 1/2 17.00 16.89 0.304 4.962 4.767 N/A
5 1/2 20.00 19.83 0.361 5.828 4.653 N/A
K55 4,910 5,320 5,290 5,830 6,800 273 5,320 252 5,320 272 5,320 40
N80 6,290 7,740 7,690 8,480 7,250 397 7,740 323 7,740 348 7,740 44
L80 6,290 7,740 7,690 8,480 8,320 397 7,740 317 7,740 338 7,740 42
L80 1Cr 6,290 7,740 7,690 8,480 8,320 397 7,740 317 7,740 338 7,740 42
L80 HC 6,630 7,740 7,690 8,480 8,320 397 7,740 317 7,740 338 7,740 42
L80 IRP 6,290 7,740 7,690 8,480 8,320 397 7,740 317 7,740 338 7,740 42
L80 HCE 6,630 8,460 8,410 9,280 8,320 434 8,460 337 8,460 338 8,460 43
C90 6,730 8,710 8,650 9,540 9,680 447 8,710 349 8,710 356 8,710 45
R95 6,940 9,190 9,130 10,070 9,260 471 9,190 368 9,190 374 9,190 48
T95 6,940 9,190 9,130 10,070 10,230 471 9,190 368 9,190 374 9,190 48
T95 HC 8,470 9,190 9,130 10,070 10,230 471 9,190 368 9,190 374 9,190 48
T95 E 6,940 9,670 9,620 10,600 10,230 496 9,670 374 9,670 374 9,670 48
T95 HCE 8,470 9,670 9,620 10,600 10,230 496 9,670 374 9,670 374 9,670 48
P110 7,480 10,640 10,580 11,660 12,250 546 10,640 430 10,640 445 10,640 56
P110 RY 7,480 10,640 10,580 11,660 12,250 546 10,640 430 10,640 445 10,640 56
P110 MS 7,480 10,640 10,580 11,660 12,250 546 10,640 430 10,640 445 10,640 56
P110 EC 8,840 12,090 12,020 13,260 13,310 620 12,090 481 12,090 481 12,090 62
P110 HCE 9,040 12,090 12,020 13,260 13,310 620 12,090 481 12,090 481 12,090 62
Q125 7,890 12,090 12,020 13,260 13,310 620 12,090 481 12,090 481 12,090 62
Q125 HC 9,110 12,090 12,020 13,260 13,310 620 12,090 481 12,090 481 12,090 62
Q125 HCE 9,110 13,060 12,980 14,320 13,890 670 13,060 498 13,060 498 13,060 64
N80 8,830 9,190 9,110 9,980 8,670 466 - - 9,190 428 8,990 52
L80 8,830 9,190 9,110 9,980 9,970 466 - - 9,190 416 8,990 50
L80 1Cr 8,830 9,190 9,110 9,980 9,970 466 - - 9,190 416 8,990 50
L80 HC 9,850 9,190 9,110 9,980 9,970 466 - - 9,190 416 8,990 50
L80 IRP 8,830 9,190 9,110 9,980 9,970 466 - - 9,190 416 8,990 50
L80 HCE 9,850 10,050 9,970 10,910 9,970 510 - - 10,050 416 9,830 51
C90 9,630 10,340 10,250 11,230 11,600 525 - - 10,340 438 10,120 53
R95 10,020 10,910 10,820 11,850 11,080 554 - - 10,910 460 10,680 56 T95 10,020 10,910 10,820 11,850 12,250 554 - - 10,910 460 10,680 56
T95 HC 11,130 10,910 10,820 11,850 12,250 554 - - 10,910 460 10,680 56
T95 E 10,020 11,490 11,390 12,470 12,250 583 - - 11,490 460 11,240 56
T95 HCE 11,130 11,490 11,390 12,470 12,250 583 - - 11,490 460 11,240 56
P110 11,110 12,640 12,530 13,720 14,680 641 - - 12,640 548 12,360 66
P110 RY 11,110 12,640 12,530 13,720 14,680 641 - - 12,640 548 12,360 66
P110 MS 11,110 12,640 12,530 13,720 14,680 641 - - 12,640 548 12,360 66
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 63/124
Casing Dimensions andMinimum Performance Properties
Vallourec USA Corporation / Performance Data 4 1/2” -7” / pg.
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
5 1/2 23.00 22.56 0.415 6.630 4.545 N/A
5 1/2 26.00 25.56 0.476 7.513 4.423 N/A
P110 EC 12,090 14,360 14,240 15,590 15,950 729 - - 13,160 592 14,050 72
P110 HCE 12,440 14,360 14,240 15,590 15,950 729 - - 13,160 592 14,050 72
C110 11,110 12,640 12,530 13,720 13,500 641 - - 12,640 504 12,360 62
Q125 12,090 14,360 14,240 15,590 15,950 729 - - 13,160 592 14,050 72
Q125 HC 13,320 14,360 14,240 15,590 15,950 729 - - 13,160 592 14,050 72
Q125 HCE 13,320 15,510 15,380 16,840 16,640 787 - - 13,160 614 15,180 76
N80 11,160 10,560 10,450 11,370 10,030 530 - - 9,870 502 8,990 58
L80 11,160 10,560 10,450 11,370 11,550 530 - - 9,870 489 8,990 55
L80 1Cr 11,160 10,560 10,450 11,370 11,550 530 - - 9,870 489 8,990 55
L80 HC 12,210 10,560 10,450 11,370 11,550 530 - - 9,870 489 8,990 55
L80 IRP 11,160 10,560 10,450 11,370 11,550 530 - - 9,870 489 8,990 55
L80 HCE 12,210 11,550 11,430 12,430 11,550 580 - - 10,800 489 9,830 55
C90 12,380 11,880 11,750 12,790 13,450 597 - - 11,110 514 10,120 58
R95 12,930 12,540 12,410 13,500 12,840 630 - - 11,730 540 10,680 60
T95 12,930 12,540 12,410 13,500 14,210 630 - - 11,730 540 10,680 60
T95 HC 13,480 12,540 12,410 13,500 14,210 630 - - 11,730 540 10,680 60
T95 E 12,930 13,200 13,060 14,210 14,210 663 - - 12,340 540 11,240 60
T95 HCE 13,480 13,200 13,060 14,210 14,210 663 - - 12,340 540 11,240 60
P110 14,540 14,530 14,360 15,630 17,020 729 - - 13,160 643 12,360 72
P110 RY 14,540 14,530 14,360 15,630 17,020 729 - - 13,160 643 12,360 72
P110 MS 14,540 14,530 14,360 15,630 17,020 729 - - 13,160 643 12,360 72
P110 EC 16,220 16,510 16,320 17,760 18,490 829 - - 13,160 694 14,050 78
P110 HCE 16,460 16,510 16,320 17,760 18,490 829 - - 13,160 694 14,050 78
C110 14,540 14,530 14,360 15,630 15,660 729 - - 13,160 592 12,360 66
Q125 16,060 16,510 16,320 17,760 18,490 829 - - 13,160 694 14,050 78
Q125 HC 17,610 16,510 16,320 17,760 18,490 829 - - 13,160 694 14,050 78
Q125 HCE 17,610 17,830 17,630 19,180 19,300 895 - - 13,160 720 15,180 81
N80 12,650 12,120 11,940 12,900 11,590 601 - - - - - -
L80 12,650 12,120 11,940 12,900 13,360 601 - - - - - - L80 1Cr 12,650 12,120 11,940 12,900 13,360 601 - - - - - -
L80 HC 13,830 12,120 11,940 12,900 13,360 601 - - - - - -
L80 IRP 12,650 12,120 11,940 12,900 13,360 601 - - - - - -
L80 HCE 13,830 13,250 13,060 14,110 13,360 657 - - - - - -
C90 14,230 13,630 13,430 14,520 15,580 676 - - - - - -
R95 15,020 14,390 14,180 15,320 14,860 714 - - - - - -
T95 15,020 14,390 14,180 15,320 16,460 714 - - - - - -
5 1/2 20.00 19.83 0.361 5.828 4.653 N/A
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 64/124
Casing Dimensions andMinimum Performance Properties
pg. 50 / Vallourec USA Corporation / Performance Data 4 1/2” -7”
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
5 1/2 29.70 29.67 0.562 8.718 4.251 N/A
T95 HC 15,810 14,390 14,180 15,320 16,460 714 - - - - - -
T95 E 15,020 15,150 14,930 16,130 16,460 751 - - - - - -
T95 HCE 15,810 15,150 14,930 16,130 16,460 751 - - - - - -
P110 17,390 16,660 16,420 17,740 19,710 826 - - - - - -
P110 RY 17,390 16,660 16,420 17,740 19,710 826 - - - - - -
P110 MS 17,390 16,660 16,420 17,740 19,710 826 - - - - - -
P110 EC 19,760 18,930 18,660 20,160 21,420 939 - - - - - -
P110 HCE 20,160 18,930 18,660 20,160 21,420 939 - - - - - -
C110 17,390 16,660 16,420 17,740 18,140 826 - - - - - -
Q125 19,760 18,930 18,660 20,160 21,420 939 - - - - - -
Q125 HC 21,340 18,930 18,660 20,160 21,420 939 - - - - - -
Q125 HCE 21,340 20,450 20,150 21,770 22,350 1,014 - - - - - -
N80 13,220 12,730 12,520 13,500 12,200 628 - - - - - -
L80 13,220 12,730 12,520 13,500 14,080 628 - - - - - -
L80 1Cr 13,220 12,730 12,520 13,500 14,080 628 - - - - - -
L80 HC 14,460 12,730 12,520 13,500 14,080 628 - - - - - -
L80 IRP 13,220 12,730 12,520 13,500 14,080 628 - - - - - -
L80 HCE 14,460 13,920 13,700 14,760 14,080 687 - - - - - -
C90 14,880 14,320 14,090 15,190 16,430 707 - - - - - -
R95 15,700 15,110 14,870 16,030 15,660 746 - - - - - -
T95 15,700 15,110 14,870 16,030 17,360 746 - - - - - -
T95 HC 16,600 15,110 14,870 16,030 17,360 746 - - - - - -
T95 E 15,700 15,910 15,650 16,870 17,360 785 - - - - - -
T95 HCE 16,600 15,910 15,650 16,870 17,360 785 - - - - - -
P110 18,180 17,500 17,220 18,560 20,790 864 - - - - - -
P110 RY 18,180 17,500 17,220 18,560 20,790 864 - - - - - -
P110 MS 18,180 17,500 17,220 18,560 20,790 864 - - - - - -
P110 EC 20,660 19,890 19,570 21,090 22,590 982 - - - - - -
P110 HCE 21,060 19,890 19,570 21,090 22,590 982 - - - - - - C110 18,180 17,500 17,220 18,560 19,130 864 - - - - - -
Q125 20,660 19,890 19,570 21,090 22,590 982 - - - - - -
Q125 HC 22,310 19,890 19,570 21,090 22,590 982 - - - - - -
Q125 HCE 22,310 21,480 21,130 22,780 23,570 1,060 - - - - - -
N80 14,680 14,310 14,020 15,010 13,820 697 - - - - - -
L80 14,680 14,310 14,020 15,010 15,970 697 - - - - - -
L80 1Cr 14,680 14,310 14,020 15,010 15,970 697 - - - - - -
5 1/2 26.80 26.73 0.500 7.854 4.375 N/A
5 1/2 26.00 25.56 0.476 7.513 4.423 N/A
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 65/124
Casing Dimensions andMinimum Performance Properties
Vallourec USA Corporation / Performance Data 4 1/2” -7” / pg.
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
5 1/2 29.70 29.67 0.562 8.718 4.251 N/A
5 1/2 32.60 32.57 0.625 9.572 4.125 N/A
L80 HC 16,050 14,310 14,020 15,010 15,970 697 - - - - - -
L80 IRP 14,680 14,310 14,020 15,010 15,970 697 - - - - - -
L80 HCE 16,050 15,650 15,330 16,420 15,970 763 - - - - - -
C90 16,510 16,090 15,770 16,890 18,650 785 - - - - - -
R95 17,430 16,990 16,640 17,820 17,770 828 - - - - - -
T95 17,430 16,990 16,640 17,820 19,710 828 - - - - - -
T95 HC 18,920 16,990 16,640 17,820 19,710 828 - - - - - -
T95 E 17,430 17,880 17,520 18,760 19,710 872 - - - - - -
T95 HCE 18,920 17,880 17,520 18,760 19,710 872 - - - - - -
P110 20,180 19,670 19,270 20,640 23,600 959 - - - - - -
P110 RY 20,180 19,670 19,270 20,640 23,600 959 - - - - - -
P110 MS 20,180 19,670 19,270 20,640 23,600 959 - - - - - -
P110 EC 22,940 22,350 21,900 23,450 25,650 1,090 - - - - - -
P110 HCE 23,340 22,350 21,900 23,450 25,650 1,090 - - - - - -
C110 20,180 19,670 19,270 20,640 21,720 959 - - - - - -
Q125 22,940 22,350 21,900 23,450 25,650 1,090 - - - - - -
Q125 HC 25,260 22,350 21,900 23,450 25,650 1,090 - - - - - -
Q125 HCE 25,260 24,140 23,650 25,330 26,760 1,177 - - - - - -
N80 16,120 15,910 15,510 16,510 15,490 766 - - - - - -
L80 16,120 15,910 15,510 16,510 17,930 766 - - - - - -
L80 1Cr 16,120 15,910 15,510 16,510 17,930 766 - - - - - -
L80 HC 18,340 15,910 15,510 16,510 17,930 766 - - - - - -
L80 IRP 16,120 15,910 15,510 16,510 17,930 766 - - - - - -
L80 HCE 18,340 17,400 16,970 18,060 17,930 838 - - - - - -
C90 18,130 17,900 17,450 18,570 20,960 861 - - - - - -
R95 19,140 18,890 18,420 19,610 19,940 909 - - - - - -
T95 19,140 18,890 18,420 19,610 22,140 909 - - - - - -
T95 HC 21,270 18,890 18,420 19,610 22,140 909 - - - - - -
T95 E 19,140 19,890 19,390 20,640 22,140 957 - - - - - - T95 HCE 21,270 19,890 19,390 20,640 22,140 957 - - - - - -
P110 22,160 21,880 21,330 22,700 26,520 1,053 - - - - - -
P110 MS 22,160 21,880 21,330 22,700 26,520 1,053 - - - - -
P110 EC 25,180 24,860 24,240 25,800 28,820 1,197 - - - - - -
P110 HCE 25,580 24,860 24,240 25,800 28,820 1,197 - - - - - -
C110 22,160 21,880 21,330 22,700 24,400 1,053 - - - - - -
Q125 25,180 24,860 24,240 25,800 28,820 1,197 - - - - - -
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 66/124
Casing Dimensions andMinimum Performance Properties
pg. 52 / Vallourec USA Corporation / Performance Data 4 1/2” -7”
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
Q125 HC 28,490 24,860 24,240 25,800 28,820 1,197 - - - - - -
Q125 HCE 28,490 26,850 26,180 27,860 30,070 1,292 - - - - - -
N80 17,490 17,490 16,960 17,950 17,160 831 - - - - - -
L80 17,490 17,490 16,960 17,950 19,890 831 - - - - - -
L80 1Cr 17,490 17,490 16,960 17,950 19,890 831 - - - - - -
L80 HC 20,320 17,490 16,960 17,950 19,890 831 - - - - - -
L80 IRP 17,490 17,490 16,960 17,950 19,890 831 - - - - - -
L80 HCE 20,320 19,130 18,550 19,630 19,890 909 - - - - - -
C90 19,680 19,670 19,080 20,190 23,280 935 - - - - - -
R95 20,770 20,770 20,140 21,320 22,120 987 - - - - - -
T95 20,770 20,770 20,140 21,320 24,590 987 - - - - - -
T95 HC 23,580 20,770 20,140 21,320 24,590 987 - - - - - -
T95 E 20,770 21,860 21,200 22,440 24,590 1,039 - - - - - -
T95 HCE 23,580 21,860 21,200 22,440 24,590 1,039 - - - - - -
P110 24,050 24,050 23,320 24,680 29,460 1,143 - - - - - -
P110 RY 24,050 24,050 23,320 24,680 29,460 1,143 - - - - - -
P110 MS 24,050 24,050 23,320 24,680 29,460 1,143 - - - - - -
P110 EC 27,330 27,320 26,500 28,050 32,010 1,298 - - - - - -
P110 HCE 27,730 27,320 26,500 28,050 32,010 1,298 - - - - - -
C110 24,050 24,050 23,320 24,680 27,100 1,143 - - - - - -
Q125 27,330 27,320 26,500 28,050 32,010 1,298 - - - - - -
Q125 HC 31,650 27,320 26,500 28,050 32,010 1,298 - - - - - -
Q125 HCE 31,650 29,510 28,620 30,290 33,400 1,402 - - - - - -
J55 4,560 5,110 5,090 5,620 5,160 382 5,110 314 5,110 340 5,110 45
K55 4,560 5,110 5,090 5,620 6,530 382 5,110 342 5,110 372 5,110 54
N80 5,760 7,440 7,400 8,170 6,960 555 7,440 443 7,440 481 7,440 61
L80 5,760 7,440 7,400 8,170 7,990 555 7,440 436 7,440 473 7,440 59
L80 1Cr 5,760 7,440 7,400 8,170 7,990 555 7,440 436 7,440 473 7,440 59
L80 HC 7,170 7,440 7,400 8,170 7,990 555 7,440 436 7,440 473 7,440 59 L80 IRP 5,760 7,440 7,400 8,170 7,990 555 7,440 436 7,440 473 7,440 59
L80 HCE 7,170 8,140 8,090 8,940 7,990 607 8,140 464 8,140 494 8,140 60
C90 6,140 8,370 8,320 9,190 9,290 624 8,370 481 8,370 520 8,370 63
R95 6,310 8,830 8,780 9,700 8,880 659 8,830 507 8,830 546 8,830 66
T95 6,310 8,830 8,780 9,700 9,810 659 8,830 507 8,830 546 8,830 66
T95 HC 7,850 8,830 8,780 9,700 9,810 659 8,830 507 8,830 546 8,830 66
T95 E 6,310 9,300 9,250 10,210 9,810 694 9,300 526 9,300 546 9,300 67
5 1/2 35.70 35.35 0.687 10.388 4.001 N/A
6 5/8 24.00 23.60 0.352 6.937 5.796 N/A
5 1/2 32.60 32.57 0.625 9.572 4.125 N/A
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 67/124
Casing Dimensions andMinimum Performance Properties
Vallourec USA Corporation / Performance Data 4 1/2” -7” / pg.
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
6 5/8 28.00 27.67 0.417 8.133 5.666 N/A
6 5/8 32.00 31.23 0.475 9.177 5.550 N/A
T95 HCE 7,850 9,300 9,250 10,210 9,810 694 9,300 526 9,300 546 9,300 67
P110 6,730 10,230 10,170 11,230 11,750 763 10,230 592 10,230 641 10,230 78
P110 RY 6,730 10,230 10,170 11,230 11,750 763 10,230 592 10,230 641 10,230 78
P110 MS 6,730 10,230 10,170 11,230 11,750 763 10,230 592 10,230 641 10,230 78
P110 EC 7,580 11,620 11,560 12,770 12,770 867 11,620 662 11,620 702 11,620 86
P110 HCE 7,980 11,620 11,560 12,770 12,770 867 11,620 662 11,620 702 11,620 86
C110 6,730 10,230 10,170 11,230 10,810 763 10,230 577 10,230 598 10,230 73
Q125 7,020 11,620 11,560 12,770 12,770 867 11,620 662 11,620 702 11,620 86
Q125 HC 8,850 11,620 11,560 12,770 12,770 867 11,620 662 11,620 702 11,620 86
Q125 HCE 8,850 12,550 12,480 13,790 13,330 936 11,820 707 11,820 728 12,550 90
J55 6,170 6,060 6,010 6,600 6,150 447 - - 6,060 415 6,060 53
K55 6,170 6,060 6,010 6,600 7,790 447 - - 6,060 454 6,060 64
N80 8,170 8,810 8,740 9,590 8,300 651 - - 8,810 586 8,810 72
L80 8,170 8,810 8,740 9,590 9,540 651 - - 8,810 576 8,810 69
L80 1Cr 8,170 8,810 8,740 9,590 9,540 651 - - 8,810 576 8,810 69
L80 HC 9,260 8,810 8,740 9,590 9,540 651 - - 8,810 576 8,810 69
L80 IRP 8,170 8,810 8,740 9,590 9,540 651 - - 8,810 576 8,810 69
L80 HCE 9,260 9,640 9,560 10,490 9,540 712 - - 9,640 602 9,640 70
C90 8,880 9,910 9,840 10,790 11,100 732 - - 9,910 633 9,910 74
R95 9,220 10,460 10,380 11,390 10,610 773 - - 10,460 665 10,460 78
T95 9,220 10,460 10,380 11,390 11,720 773 - - 10,460 665 10,460 78
T95 HC 10,490 10,460 10,380 11,390 11,720 773 - - 10,460 665 10,460 78
T95 E 9,220 11,020 10,930 11,990 11,720 813 - - 11,020 665 11,020 79
T95 HCE 10,490 11,020 10,930 11,990 11,720 813 - - 11,020 665 11,020 79
P110 10,160 12,120 12,020 13,190 14,040 895 - - 11,820 781 12,120 92
P110 RY 10,160 12,120 12,020 13,190 14,040 895 - - 11,820 781 12,120 92
P110 MS 10,160 12,120 12,020 13,190 14,040 895 - - 11,820 781 12,120 92
P110 EC 11,000 13,770 13,660 14,990 15,260 1,017 - - 11,820 855 13,770 1,00
P110 HCE 11,400 13,770 13,660 14,990 15,260 1,017 - - 11,820 855 13,770 1,00 C110 10,160 12,120 12,020 13,190 12,920 895 - - 11,820 728 12,120 86
Q125 11,000 13,770 13,660 14,990 15,260 1,017 - - 11,820 855 13,770 1,00
Q125 HC 12,920 13,770 13,660 14,990 15,260 1,017 - - 11,820 855 13,770 1,00
Q125 HCE 12,920 14,870 14,760 16,190 15,920 1,098 - - 11,820 887 14,780 1,05
N80 10,320 10,040 9,940 10,840 9,500 734 - - 10,040 678 9,810 81
L80 10,320 10,040 9,940 10,840 10,940 734 - - 10,040 666 9,810 78
L80 1Cr 10,320 10,040 9,940 10,840 10,940 734 - - 10,040 666 9,810 78
6 5/8 24.00 23.60 0.352 6.937 5.796 N/A
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 68/124
Casing Dimensions andMinimum Performance Properties
pg. 54 / Vallourec USA Corporation / Performance Data 4 1/2” -7”
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
6 5/8 35.00 34.23 0.525 10.061 5.450 N/A
L80 HC 11,080 10,040 9,940 10,840 10,940 734 - - 10,040 666 9,810 78
L80 IRP 10,320 10,040 9,940 10,840 10,940 734 - - 10,040 666 9,810 78
L80 HCE 11,080 10,980 10,870 11,860 10,940 803 - - 10,980 696 10,730 80
C90 11,330 11,290 11,180 12,190 12,740 826 - - 11,290 732 11,040 83
R95 11,820 11,920 11,800 12,870 12,160 872 - - 11,820 769 11,660 88
T95 11,820 11,920 11,800 12,870 13,460 872 - - 11,820 769 11,660 88
T95 HC 12,520 11,920 11,800 12,870 13,460 872 - - 11,820 769 11,660 88
T95 E 11,820 12,550 12,420 13,550 13,460 918 - - 11,820 769 12,270 89
T95 HCE 12,520 12,550 12,420 13,550 13,460 918 - - 11,820 769 12,270 89
P110 13,230 13,800 13,660 14,900 16,120 1,010 - - 11,820 904 13,500 1,04
P110 RY 13,230 13,800 13,660 14,900 16,120 1,010 - - 11,820 904 13,500 1,04
P110 MS 13,230 13,800 13,660 14,900 16,120 1,010 - - 11,820 904 13,500 1,04
P110 EC 14,540 15,680 15,530 16,940 17,520 1,147 - - 11,820 989 14,780 1,13
P110 HCE 14,940 15,680 15,530 16,940 17,520 1,147 - - 11,820 989 14,780 1,13
C110 13,230 13,800 13,660 14,900 14,830 1,010 - - 11,820 842 13,500 97
Q125 14,540 15,680 15,530 16,940 17,520 1,147 - - 11,820 989 14,780 1,13
Q125 HC 15,800 15,680 15,530 16,940 17,520 1,147 - - 11,820 989 14,780 1,13
Q125 HCE 15,800 16,940 16,770 18,290 18,280 1,239 - - 11,820 1,025 14,780 1,19
N80 11,670 11,090 10,960 11,900 10,560 805 - - - - - -
L80 11,670 11,090 10,960 11,900 12,160 805 - - - - - -
L80 1Cr 11,670 11,090 10,960 11,900 12,160 805 - - - - - -
L80 HC 12,770 11,090 10,960 11,900 12,160 805 - - - - - -
L80 IRP 11,670 11,090 10,960 11,900 12,160 805 - - - - - -
L80 HCE 12,770 12,130 11,990 13,010 12,160 880 - - - - - -
C90 13,130 12,480 12,330 13,380 14,170 905 - - - - - -
R95 13,860 13,170 13,010 14,130 13,530 956 - - - - - -
T95 13,860 13,170 13,010 14,130 14,970 956 - - - - - -
T95 HC 14,590 13,170 13,010 14,130 14,970 956 - - - - - -
T95 E 13,860 13,870 13,700 14,870 14,970 1,006 - - - - - - T95 HCE 14,590 13,870 13,700 14,870 14,970 1,006 - - - - - -
P110 15,870 15,250 15,070 16,360 17,930 1,107 - - - - - -
P110 RY 15,870 15,250 15,070 16,360 17,930 1,107 - - - - - -
P110 MS 15,870 15,250 15,070 16,360 17,930 1,107 - - - - - -
P110 EC 17,600 17,330 17,120 18,590 19,490 1,258 - - - - - -
P110 HCE 17,600 17,330 17,120 18,590 19,490 1,258 - - - - - -
C110 15,870 15,250 15,070 16,360 16,500 1,107 - - - - - -
6 5/8 32.00 31.23 0.475 9.177 5.550 N/A
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 69/124
Casing Dimensions andMinimum Performance Properties
Vallourec USA Corporation / Performance Data 4 1/2” -7” / pg.
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
7 26.00 25.69 0.362 7.549 6.151 N/A
Q125 17,600 17,330 17,120 18,590 19,490 1,258 - - - - - -
Q125 HC 18,700 17,330 17,120 18,590 19,490 1,258 - - - - - -
Q125 HCE 18,700 18,720 18,490 20,070 20,340 1,358 - - - - - -
J55 2,270 3,740 3,730 4,160 3,740 316 3,740 234 - - - -
K55 2,270 3,740 3,730 4,160 4,730 316 3,740 254 - - - -
J55 3,270 4,360 4,340 4,820 4,370 366 4,360 284 4,360 313 4,360 43
K55 3,270 4,360 4,340 4,820 5,540 366 4,360 309 4,360 341 4,360 52
N80 3,830 6,340 6,310 7,010 5,900 532 6,340 402 6,340 442 6,340 58
L80 3,830 6,340 6,310 7,010 6,770 532 6,340 396 6,340 435 6,340 56
L80 1Cr 3,830 6,340 6,310 7,010 6,770 532 6,340 396 6,340 435 6,340 56
L80 HC 3,920 6,340 6,310 7,010 6,770 532 6,340 396 6,340 435 6,340 56
L80 IRP 3,830 6,340 6,310 7,010 6,770 532 6,340 396 6,340 435 6,340 56
L80 HCE 3,920 6,930 6,910 7,670 6,770 582 6,930 422 6,930 461 6,930 57
C90 4,030 7,130 7,100 7,890 7,860 599 7,130 437 7,130 479 7,130 60
R95 4,150 7,530 7,500 8,330 7,530 632 7,530 460 7,530 505 7,530 63
T95 4,150 7,530 7,500 8,330 8,310 632 7,530 460 7,530 505 7,530 63
T95 HC 5,440 7,530 7,500 8,330 8,310 632 7,530 460 7,530 505 7,530 63
T95 E 4,150 7,930 7,890 8,770 8,310 666 7,930 477 7,930 509 7,930 64
T95 HCE 5,440 7,930 7,890 8,770 8,310 666 7,930 477 7,930 509 7,930 64
P110 4,440 8,720 8,680 9,640 9,950 732 8,720 537 8,720 590 8,720 75
P110 RY 4,440 8,720 8,680 9,640 9,950 732 8,720 537 8,720 590 8,720 75
P110 MS 4,440 8,720 8,680 9,640 9,950 732 8,720 537 8,720 590 8,720 75
P110 EC 5,690 9,910 9,870 10,960 10,810 832 9,520 601 9,520 655 9,910 82
P110 HCE 5,690 9,910 9,870 10,960 10,810 832 9,520 601 9,520 655 9,910 82
C110 4,440 8,720 8,680 9,640 9,150 732 8,720 524 8,720 558 8,720 70
Q125 4,650 9,910 9,870 10,960 10,810 832 9,520 601 9,520 655 9,910 82
Q125 HC 5,760 9,910 9,870 10,960 10,810 832 9,520 601 9,520 655 9,910 82
Q125 HCE 5,760 10,700 10,660 11,840 11,280 898 9,520 642 9,520 679 10,700 86
J55 4,330 4,980 4,950 5,470 5,010 415 4,980 334 4,980 367 4,980 49 K55 4,330 4,980 4,950 5,470 6,350 415 4,980 364 4,980 401 4,980 59
N80 5,410 7,240 7,200 7,960 6,770 604 7,240 472 7,240 519 7,240 66
L80 5,410 7,240 7,200 7,960 7,770 604 7,240 465 7,240 511 7,240 64
L80 1Cr 5,410 7,240 7,200 7,960 7,770 604 7,240 465 7,240 511 7,240 64
L80 HC 5,520 7,240 7,200 7,960 7,770 604 7,240 465 7,240 511 7,240 64
L80 IRP 5,410 7,240 7,200 7,960 7,770 604 7,240 465 7,240 511 7,240 64
L80 HCE 5,520 7,920 7,880 8,710 7,770 661 7,920 495 7,920 541 7,920 65
6 5/8 35.00 34.23 0.525 10.061 5.450 N/A
7 20.00 19.56 0.272 5.749 6.331 N/A
7 23.00 22.65 0.317 6.655 6.241 6.250
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 70/124
Casing Dimensions andMinimum Performance Properties
pg. 56 / Vallourec USA Corporation / Performance Data 4 1/2” -7”
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
C90 5,740 8,150 8,100 8,960 9,030 679 8,150 513 8,150 563 8,150 68
R95 5,890 8,600 8,550 9,460 8,640 717 8,600 541 8,600 593 8,600 72
T95 5,890 8,600 8,550 9,460 9,540 717 8,600 541 8,600 593 8,600 72
T95 HC 7,420 8,600 8,550 9,460 9,540 717 8,600 541 8,600 593 8,600 72
T95 E 5,890 9,050 9,000 9,950 9,540 755 9,050 561 9,050 598 9,050 73
T95 HCE 7,420 9,050 9,000 9,950 9,540 755 9,050 561 9,050 598 9,050 73
P110 6,230 9,960 9,900 10,950 11,430 830 9,520 631 9,520 693 9,960 85
P110 RY 6,230 9,960 9,900 10,950 11,430 830 9,520 631 9,520 693 9,960 85
P110 MS 6,230 9,960 9,900 10,950 11,430 830 9,520 631 9,520 693 9,960 85
P110 EC 8,030 11,310 11,250 12,440 12,420 944 9,520 707 9,520 769 11,310 93
P110 HCE 8,260 11,310 11,250 12,440 12,420 944 9,520 707 9,520 769 11,310 93
C110 6,230 9,960 9,900 10,950 10,510 830 9,520 616 9,520 655 9,960 80
Q125 6,450 11,310 11,250 12,440 12,420 944 9,520 707 9,520 769 11,310 93
Q125 HC 8,260 11,310 11,250 12,440 12,420 944 9,520 707 9,520 769 11,310 93
Q125 HCE 8,260 12,220 12,150 13,440 12,960 1,019 9,520 755 9,520 798 11,790 97
N80 7,030 8,160 8,110 8,920 7,660 676 - - 8,160 597 8,160 74
L80 7,030 8,160 8,110 8,920 8,800 676 - - 8,160 587 8,160 71
L80 1Cr 7,030 8,160 8,110 8,920 8,800 676 - - 8,160 587 8,160 71
L80 HC 8,140 8,160 8,110 8,920 8,800 676 - - 8,160 587 8,160 71
L80 IRP 7,030 8,160 8,110 8,920 8,800 676 - - 8,160 587 8,160 71
L80 HCE 8,400 8,930 8,870 9,760 8,800 739 - - 8,930 623 8,930 73
C90 7,580 9,180 9,120 10,040 10,230 760 - - 9,180 648 9,180 76
R95 7,840 9,690 9,630 10,590 9,780 803 - - 9,520 683 9,690 80
T95 7,840 9,690 9,630 10,590 10,810 803 - - 9,520 683 9,690 80
T95 HC 9,300 9,690 9,630 10,590 10,810 803 - - 9,520 683 9,690 80
T95 E 7,840 10,200 10,130 11,150 10,810 845 - - 9,520 688 10,200 81
T95 HCE 9,300 10,200 10,130 11,150 10,810 845 - - 9,520 688 10,200 81
P110 8,530 11,220 11,150 12,270 12,950 929 - - 9,520 797 11,220 95
P110 RY 8,530 11,220 11,150 12,270 12,950 929 - - 9,520 797 11,220 95 P110 MS 8,530 11,220 11,150 12,270 12,950 929 - - 9,520 797 11,220 95
P110 EC 9,580 12,750 12,670 13,940 14,070 1,056 - - 9,520 885 11,790 1,04
P110 HCE 9,760 12,750 12,670 13,940 14,070 1,056 - - 9,520 885 11,790 1,04
C110 8,530 11,220 11,150 12,270 11,920 929 - - 9,520 754 11,220 89
Q125 9,110 12,750 12,670 13,940 14,070 1,056 - - 9,520 885 11,790 1,04
Q125 HC 9,760 12,750 12,670 13,940 14,070 1,056 - - 9,520 885 11,790 1,04
Q125 HCE 9,760 13,770 13,680 15,050 14,690 1,141 - - 9,520 918 11,790 1,09
7 26.00 25.69 0.362 7.549 6.151 N/A
7 29.00 28.75 0.408 8.449 6.059 6.125
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 71/124
Casing Dimensions andMinimum Performance Properties
Vallourec USA Corporation / Performance Data 4 1/2” -7” / pg.
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
N80 8,610 9,060 8,990 9,850 8,540 745 - - 9,060 672 8,460 82
L80 8,610 9,060 8,990 9,850 9,820 745 - - 9,060 661 8,460 79
L80 1Cr 8,610 9,060 8,990 9,850 9,820 745 - - 9,060 661 8,460 79
L80 HC 9,610 9,060 8,990 9,850 9,820 745 - - 9,060 661 8,460 79
L80 IRP 8,610 9,060 8,990 9,850 9,820 745 - - 9,060 661 8,460 79
L80 HCE 9,610 9,910 9,830 10,770 9,820 815 - - 9,520 701 9,250 81
C90 9,370 10,190 10,110 11,080 11,430 839 - - 9,520 729 9,510 84
R95 9,740 10,760 10,670 11,690 10,920 885 - - 9,520 768 10,040 89
T95 9,740 10,760 10,670 11,690 12,070 885 - - 9,520 768 10,040 89
T95 HC 10,910 10,760 10,670 11,690 12,070 885 - - 9,520 768 10,040 89
T95 E 9,740 11,330 11,230 12,310 12,070 932 - - 9,520 775 10,570 90
T95 HCE 10,910 11,330 11,230 12,310 12,070 932 - - 9,520 775 10,570 90
P110 10,780 12,460 12,360 13,540 14,460 1,025 - - 9,520 897 11,630 1,05
P110 RY 10,780 12,460 12,360 13,540 14,460 1,025 - - 9,520 897 11,630 1,05
P110 MS 10,780 12,460 12,360 13,540 14,460 1,025 - - 9,520 897 11,630 1,05
P110 EC 11,710 14,160 14,040 15,390 15,710 1,165 - - 9,520 996 11,790 1,15
P110 HCE 12,500 14,160 14,040 15,390 15,710 1,165 - - 9,520 996 11,790 1,15
C110 10,780 12,460 12,360 13,540 13,300 1,025 - - 9,520 848 11,630 99
Q125 11,710 14,160 14,040 15,390 15,710 1,165 - - 9,520 996 11,790 1,15
Q125 HC 12,620 14,160 14,040 15,390 15,710 1,165 - - 9,520 996 11,790 1,15
Q125 HCE 12,620 15,290 15,160 16,620 16,400 1,258 - - 9,520 1,033 11,790 1,20
N80 10,190 9,960 9,860 10,760 9,430 814 - - 9,240 746 8,460 87
L80 10,190 9,960 9,860 10,760 10,850 814 - - 9,240 734 8,460 83
L80 1Cr 10,190 9,960 9,860 10,760 10,850 814 - - 9,240 734 8,460 83
L80 HC 11,330 9,960 9,860 10,760 10,850 814 - - 9,240 734 8,460 832
L80 IRP 10,190 9,960 9,860 10,760 10,850 814 - - 9,240 734 8,460 83
L80 HCE 11,330 10,890 10,790 11,770 10,850 890 - - 9,520 778 9,250 83
C90 11,170 11,210 11,100 12,110 12,630 916 - - 9,520 809 9,510 87
R95 11,650 11,830 11,710 12,780 12,060 966 - - 9,520 853 10,040 92 T95 11,650 11,830 11,710 12,780 13,350 966 - - 9,520 853 10,040 92
T95 HC 12,390 11,830 11,710 12,780 13,350 966 - - 9,520 853 10,040 92
T95 E 11,650 12,450 12,330 13,450 13,350 1,017 - - 9,520 860 10,570 92
T95 HCE 12,390 12,450 12,330 13,450 13,350 1,017 - - 9,520 860 10,570 92
P110 13,030 13,700 13,560 14,800 15,990 1,119 - - 9,520 996 11,630 1,09
P110 RY 13,030 13,700 13,560 14,800 15,990 1,119 - - 9,520 996 11,630 1,09
P110 MS 13,030 13,700 13,560 14,800 15,990 1,119 - - 9,520 996 11,630 1,09
7 32.00 31.70 0.453 9.317 5.969 6.000
7 35.00 34.61 0.498 10.172 5.879 N/A
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 72/124
Casing Dimensions andMinimum Performance Properties
pg. 58 / Vallourec USA Corporation / Performance Data 4 1/2” -7”
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
P110 EC 14,310 15,560 15,410 16,810 17,370 1,272 - - 9,520 1,106 11,790 1,18
P110 HCE 14,720 15,560 15,410 16,810 17,370 1,272 - - 9,520 1,106 11,790 1,18
C110 13,030 13,700 13,560 14,800 14,710 1,119 - - 9,520 942 11,630 1,00
Q125 14,320 15,560 15,410 16,810 17,370 1,272 - - 9,520 1,106 11,790 1,18
Q125 HC 15,500 15,560 15,410 16,810 17,370 1,272 - - 9,520 1,106 11,790 1,18
Q125 HCE 15,500 16,810 16,640 18,160 18,130 1,373 - - 9,520 1,147 11,790 1,22
N80 11,390 10,800 10,680 11,600 10,260 877 - - 9,240 814 8,460 87
L80 11,390 10,800 10,680 11,600 11,820 877 - - 9,240 801 8,460 83
L80 1Cr 11,390 10,800 10,680 11,600 11,820 877 - - 9,240 801 8,460 83
L80 HC 13,090 10,800 10,680 11,600 11,820 877 - - 9,240 801 8,460 83
L80 IRP 11,390 10,800 10,680 11,600 11,820 877 - - 9,240 801 8,460 83
L80 HCE 13,090 11,810 11,680 12,690 11,820 959 - - 9,520 849 9,250 83
C90 12,810 12,150 12,010 13,050 13,770 986 - - 9,520 883 9,510 87
R95 13,430 12,830 12,680 13,780 13,140 1,041 - - 9,520 931 10,040 92
T95 13,430 12,830 12,680 13,780 14,550 1,041 - - 9,520 931 10,040 92
T95 HC 13,700 12,830 12,680 13,780 14,550 1,041 - - 9,520 931 10,040 92
T95 E 13,430 13,500 13,340 14,500 14,550 1,096 - - 9,520 938 10,570 92
T95 HCE 13,700 13,500 13,340 14,500 14,550 1,096 - - 9,520 938 10,570 92
P110 15,130 14,850 14,680 15,950 17,430 1,206 - - 9,520 1,087 11,630 1,09
P110 RY 15,130 14,850 14,680 15,950 17,430 1,206 - - 9,520 1,087 11,630 1,09
P110 MS 15,130 14,850 14,680 15,950 17,430 1,206 - - 9,520 1,087 11,630 1,09
P110 EC 16,740 16,880 16,680 18,130 18,940 1,370 - - 9,520 1,207 11,790 1,18
P110 HCE 16,900 16,880 16,680 18,130 18,940 1,370 - - 9,520 1,207 11,790 1,18
C110 15,130 14,850 14,680 15,950 16,030 1,206 - - 9,520 1,028 11,630 1,00
Q125 16,740 16,880 16,680 18,130 18,940 1,370 - - 9,520 1,207 11,790 1,18
Q125 HC 17,770 16,880 16,680 18,130 18,940 1,370 - - 9,520 1,207 11,790 1,18
Q125 HCE 17,770 18,230 18,010 19,580 19,760 1,479 - - 9,520 1,251 11,790 1,22
N80 12,350 11,800 11,640 12,590 11,270 950 - - - - - -
L80 12,350 11,800 11,640 12,590 12,990 950 - - - - - - L80 1Cr 12,350 11,800 11,640 12,590 12,990 950 - - - - - -
L80 HC 13,510 11,800 11,640 12,590 12,990 950 - - - - - -
L80 IRP 12,350 11,800 11,640 12,590 12,990 950 - - - - - -
L80 HCE 13,510 12,910 12,730 13,770 12,990 1,040 - - - - - -
C90 13,890 13,280 13,090 14,170 15,140 1,069 - - - - - -
R95 14,660 14,010 13,820 14,950 14,440 1,129- - - - - -
T95 14,660 14,010 13,820 14,950 16,000 1,129 - - - - - -
7 38.00 37.29 0.540 10.959 5.795 N/A
7 41.00 40.43 0.590 11.881 5.695 N/A
7 35.00 34.61 0.498 10.172 5.879 N/A
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 73/124
Casing Dimensions andMinimum Performance Properties
Vallourec USA Corporation / Performance Data 4 1/2” -7” / pg.
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative driftIP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
7 41.00 40.43 0.590 11.881 5.695 N/A
7 42.70 42.59 0.625 12.517 5.625 N/A
T95 HC 15,440 14,010 13,820 14,950 16,000 1,129 - - - - - -
T95 E 14,660 14,750 14,550 15,740 16,000 1,188 - - - - - -
T95 HCE 15,440 14,750 14,550 15,740 16,000 1,188 - - - - - -
P110 16,980 16,230 16,000 17,320 19,160 1,307 - - - - - -
P110 RY 16,980 16,230 16,000 17,320 19,160 1,307 - - - - - -
P110 MS 16,980 16,230 16,000 17,320 19,160 1,307 - - - - - -
P110 EC 19,300 18,440 18,180 19,680 20,820 1,485 - - - - - -
P110 HCE 19,300 18,440 18,180 19,680 20,820 1,485 - - - - - -
C110 16,980 16,230 16,000 17,320 17,630 1,307 - - - - - -
Q125 19,300 18,440 18,180 19,680 20,820 1,485 - - - - - -
Q125 HC 20,840 18,440 18,180 19,680 20,820 1,485 - - - - - -
Q125 HCE 20,840 19,910 19,640 21,250 21,730 1,604 - - - - - -
N80 13,010 12,500 12,310 13,280 11,970 1,001 - - - - - -
L80 13,010 12,500 12,310 13,280 13,810 1,001 - - - - - -
L80 1Cr 13,010 12,500 12,310 13,280 13,810 1,001 - - - - - -
L80 HC 14,230 12,500 12,310 13,280 13,810 1,001 - - - - - -
L80 IRP 13,010 12,500 12,310 13,280 13,810 1,001 - - - - - -
L80 HCE 14,230 13,670 13,460 14,520 13,810 1,095 - - - - - -
C90 14,640 14,060 13,850 14,940 16,110 1,127 - - - - - -
R95 15,450 14,840 14,610 15,770 15,360 1,189 - - - - - -
T95 15,450 14,840 14,610 15,770 17,020 1,189 - - - - - -
T95 HC 16,260 14,840 14,610 15,770 17,020 1,189 - - - - - -
T95 E 15,450 15,630 15,380 16,600 17,020 1,252 - - - - - -
T95 HCE 16,260 15,630 15,380 16,600 17,020 1,252 - - - - - -
P110 17,890 17,190 16,920 18,260 20,390 1,377 - - - - - -
P110 RY 17,890 17,190 16,920 18,260 20,390 1,377 - - - - - -
P110 MS 17,890 17,190 16,920 18,260 20,390 1,377 - - - - - -
P110 EC 20,330 19,530 19,230 20,750 22,150 1,565 - - - - - -
P110 HCE 20,330 19,530 19,230 20,750 22,150 1,565 - - - - - - C110 17,890 17,190 16,920 18,260 18,760 1,377 - - - - - -
Q125 20,330 19,530 19,230 20,750 22,150 1,565 - - - - - -
Q125 HC 21,950 19,530 19,230 20,750 22,150 1,565 - - - - - -
Q125 HCE 21,950 21,090 20,770 22,410 23,120 1,690 - - - - - -
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 74/124
Casing Dimensions andMinimum Performance Properties
pg. 60 / Vallourec USA Corporation / Performance Data 4 1/2” -7”
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 75/124
Performance Data7 5/8" - 10 3/4"
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 76/124
Performance Data7 5/8" - 10 3/4"
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 77/124
Casing Dimensions andMinimum Performance Properties
Vallourec USA Corporation / Performance Data 7 5/8” -10 3/4” / pg.
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
7 5/8 29.70 29.06 0.375 8.541 6.750 N/A
J55 2,890 4,140 4,130 4,590 4,150 414 4,140 315 4,140 346 4,140 48
K55 2,890 4,140 4,130 4,590 5,250 414 4,140 342 4,140 377 4,140 58
N80 3,400 6,020 6,000 6,680 5,600 602 6,020 446 6,020 490 6,020 65
L80 3,400 6,020 6,000 6,680 6,420 602 6,020 440 6,020 482 6,020 63
L80 1Cr 3,400 6,020 6,000 6,680 6,420 602 6,020 440 6,020 482 6,020 63
L80 HC 3,520 6,020 6,000 6,680 6,420 602 6,020 440 6,020 482 6,020 63
L80 IRP 3,400 6,020 6,000 6,680 6,420 602 6,020 440 6,020 482 6,020 63
L80 HCE 3,520 6,590 6,560 7,300 6,420 658 6,590 469 6,590 514 6,590 65
C90 3,610 6,780 6,750 7,510 7,450 677 6,780 485 6,780 532 6,780 68
R95 3,710 7,150 7,130 7,930 7,140 714 7,150 511 7,150 560 7,150 71
T95 3,710 7,150 7,130 7,930 7,880 714 7,150 511 7,150 560 7,150 71
T95 HC 4,760 7,150 7,130 7,930 7,880 714 7,150 511 7,150 560 7,150 71
T95 E 3,710 7,530 7,500 8,350 7,880 752 7,530 531 7,530 581 7,530 72
T95 HCE 4,760 7,530 7,500 8,350 7,880 752 7,530 531 7,530 581 7,530 72
P110 3,920 8,280 8,250 9,180 9,430 827 8,280 597 8,280 654 8,280 84
P110 MS 3,920 8,280 8,250 9,180 9,430 827 8,280 597 8,280 654 8,280 84
P110 EC 4,900 9,410 9,380 10,430 10,250 940 9,410 669 9,410 733 9,410 92
P110 HCE 5,210 9,410 9,380 10,430 10,250 940 9,410 669 9,410 733 9,410 92
C110 3,920 8,280 8,250 9,180 8,680 827 8,280 583 8,280 637 8,280 79
Q125 4,050 9,410 9,380 10,430 10,250 940 9,410 669 9,410 733 9,410 92
Q125 HC 5,210 9,410 9,380 10,430 10,250 940 9,410 669 9,410 733 9,410 92
Q125 HCE 5,210 10,160 10,130 11,270 10,700 1,015 10,160 714 10,160 775 10,160 97
N80 4,790 6,890 6,850 7,590 6,420 683 - - 6,890 575 6,890 74
L80 4,790 6,890 6,850 7,590 7,370 683 - - 6,890 567 6,890 72
L80 1Cr 4,790 6,890 6,850 7,590 7,370 683 - - 6,890 567 6,890 72
L80 HC 4,830 6,890 6,850 7,590 7,370 683 - - 6,890 567 6,890 72
L80 IRP 4,790 6,890 6,850 7,590 7,370 683 - - 6,890 567 6,890 72
L80 HCE 4,830 7,530 7,500 8,300 7,370 747 - - 7,530 604 7,530 73
C90 5,030 7,750 7,710 8,540 8,570 769 - - 7,750 625 7,750 77 R95 5,130 8,180 8,140 9,010 8,200 811 - - 8,180 659 8,180 81
T95 5,130 8,180 8,140 9,010 9,050 811 - - 8,180 659 8,180 81
95 HC 6,650 8,180 8,140 9,010 9,050 811 - - 8,180 659 8,180 81
T95 E 5,130 8,610 8,570 9,490 9,050 854 - - 8,610 683 8,610 82
T95 HCE 6,650 8,610 8,570 9,490 9,050 854 - - 8,610 683 8,610 82
P110 5,350 9,470 9,420 10,440 10,840 940 - - 9,470 769 9,470 96
P110 MS 5,350 9,470 9,420 10,440 10,840 940 - - 9,470 769 9,470 96
7 5/8 26.40 25.59 0.328 7.519 6.844 N/A
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 78/124
Casing Dimensions andMinimum Performance Properties
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
7 5/8 29.70 29.06 0.375 8.541 6.750 N/A
7 5/8 33.70 33.07 0.430 9.720 6.640 N/A
7 5/8 39.00 38.08 0.500 11.192 6.500 N/A
pg. 62/ Vallourec USA Corporation / Performance Data 7 5/8” -10 3/4”
P110 EC 7,360 10,760 10,710 11,860 11,780 1,068 - - 10,760 861 10,760 1,05
P110 HCE 7,580 10,760 10,710 11,860 11,780 1,068 - - 10,760 861 10,760 1,05
C110 5,350 9,470 9,420 10,440 9,980 940 - - 9,470 748 9,470 90
Q125 5,670 10,760 10,710 11,860 11,780 1,068 - - 10,760 861 10,760 1,05
Q125 HC 7,580 10,760 10,710 11,860 11,780 1,068 - - 10,760 861 10,760 1,05
Q125 HCE 7,580 11,620 11,560 12,810 12,290 1,153 - - 11,620 911 11,620 1,10
N80 6,560 7,900 7,850 8,650 7,400 778 - - 7,900 674 7,900 85
L80 6,560 7,900 7,850 8,650 8,500 778 - - 7,900 664 7,900 82
L80 1Cr 6,560 7,900 7,850 8,650 8,500 778 - - 7,900 664 7,900 82
L80 HC 6,930 7,900 7,850 8,650 8,500 778 - - 7,900 664 7,900 82
L80 IRP 6,560 7,900 7,850 8,650 8,500 778 - - 7,900 664 7,900 82
L80 HCE 6,930 8,640 8,580 9,460 8,500 850 - - 8,640 708 8,640 84
C90 7,050 8,880 8,830 9,730 9,890 875 - - 8,880 733 8,880 88
R95 7,270 9,380 9,320 10,270 9,450 923 - - 9,380 772 9,380 92
T95 7,270 9,380 9,320 10,270 10,440 923 - - 9,380 772 9,380 92
T95 HC 8,780 9,380 9,320 10,270 10,440 923 - - 9,380 772 9,380 92
T95 E 7,270 9,870 9,810 10,810 10,440 972 - - 9,870 801 9,870 93
T95 HCE 8,780 9,870 9,810 10,810 10,440 972 - - 9,870 801 9,870 939
P110 7,870 10,860 10,790 11,890 12,510 1,069 - - 10,860 901 10,860 1,09
P110 MS 7,870 10,860 10,790 11,890 12,510 1,069 - - 10,860 901 10,860 1,09
P110 EC 9,060 12,340 12,260 13,510 13,590 1,215 - - 11,790 1,009 12,340 1,19
P110 HCE 9,330 12,340 12,260 13,510 13,590 1,215 - - 11,790 1,009 12,340 1,19
C110 7,870 10,860 10,790 11,890 11,510 1,069 - - 10,860 877 10,860 1,03
Q125 8,340 12,340 12,260 13,510 13,590 1,215 - - 11,790 1,009 12,340 1,19
Q125 HC 9,330 12,340 12,260 13,510 13,590 1,215 - - 11,790 1,009 12,340 1,19
Q125 HCE 9,330 13,320 13,240 14,590 14,190 1,312 - - 11,790 1,068 12,670 1,25
N80 8,820 9,180 9,100 9,970 8,660 895 - - 9,180 798 9,180 98
L80 8,820 9,180 9,100 9,970 9,960 895 - - 9,180 786 9,180 94
L80 1Cr 8,820 9,180 9,100 9,970 9,960 895 - - 9,180 786 9,180 94 L80 HC 9,420 9,180 9,100 9,970 9,960 895 - - 9,180 786 9,180 94
L80 IRP 8,820 9,180 9,100 9,970 9,960 895 - - 9,180 786 9,180 94
L80 HCE 9,420 10,040 9,960 10,900 9,960 979 - - 10,040 837 10,040 96
C90 9,610 10,330 10,240 11,220 11,590 1,007 - - 10,330 867 10,330 1,0
R95 10,000 10,900 10,810 11,840 11,070 1,063 - - 10,900 914 10,900 1,06
T95 10,000 10,900 10,810 11,840 12,240 1,063 - - 10,900 914 10,900 1,06
T95 HC 11,120 10,900 10,810 11,840 12,240 1,063 - - 10,900 914 10,900 1,06
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 79/124
Casing Dimensions andMinimum Performance Properties
Vallourec USA Corporation / Performance Data 7 5/8” -10 3/4” / pg.
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
7 5/8 42.80 42.43 0.562 12.470 6.376 N/A
7 5/8 39.00 38.08 0.500 11.192 6.500 N/A
7 5/8 45.30 44.71 0.595 13.141 6.310 N/A
T95 E 10,000 11,480 11,380 12,460 12,240 1,119 - - 11,480 948 11,480 1,08
T95 HCE 11,120 11,480 11,380 12,460 12,240 1,119 - - 11,480 948 11,480 1,08
P110 11,080 12,620 12,520 13,710 14,660 1,231 - - 11,790 1,066 12,620 1,25
P110 MS 11,080 12,620 12,520 13,710 14,660 1,231 - - 11,790 1,066 12,620 1,25
P110 EC 12,180 14,340 14,220 15,580 15,930 1,399 - - 11,790 1,194 12,670 1,37
P110 HCE 13,210 14,340 14,220 15,580 15,930 1,399 - - 11,790 1,194 12,670 1,37
C110 11,080 12,620 12,520 13,710 13,490 1,231 - - 11,790 1,038 12,620 1,18
Q125 12,060 14,340 14,220 15,580 15,930 1,399 - - 11,790 1,194 12,670 1,37
Q125 HC 13,500 14,340 14,220 15,580 15,930 1,399 - - 11,790 1,194 12,670 1,37
Q125 HCE 13,500 15,490 15,360 16,820 16,630 1,511 - - 11,790 1,264 12,670 1,44
N80 10,820 10,320 10,210 11,120 9,780 998 - - 10,320 906 9,790 1,09
L80 10,820 10,320 10,210 11,120 11,260 998 - - 10,320 891 9,790 1,05
L80 1Cr 10,820 10,320 10,210 11,120 11,260 998 - - 10,320 891 9,790 1,05
L80 HC 11,620 10,320 10,210 11,120 11,260 998 - - 10,320 891 9,790 1,05
L80 IRP 10,820 10,320 10,210 11,120 11,260 998 - - 10,320 891 9,790 1,05
L80 HCE 11,620 11,290 11,170 12,160 11,260 1,091 - - 11,290 950 10,710 1,07
C90 11,890 11,610 11,490 12,510 13,120 1,122 - - 11,610 984 11,010 1,12
R95 12,410 12,250 12,120 13,210 12,520 1,185 - - 11,790 1,037 11,620 1,18
T95 12,410 12,250 12,120 13,210 13,860 1,185 - - 11,790 1,037 11,620 1,18
T95 HC 12,960 12,250 12,120 13,210 13,860 1,185 - - 11,790 1,037 11,620 1,18
T95 E 12,410 12,900 12,760 13,900 13,860 1,247 - - 11,790 1,075 12,240 1,20
T95 HCE 12,960 12,900 12,760 13,900 13,860 1,247 - - 11,790 1,075 12,240 1,20
P110 13,930 14,190 14,040 15,290 16,600 1,372 - - 11,790 1,210 12,670 1,40
P110 MS 13,930 14,190 14,040 15,290 16,600 1,372 - - 11,790 1,210 12,670 1,40
P110 EC 15,350 16,120 15,950 17,380 18,040 1,559 - - 11,790 1,355 12,670 1,53
P110 HCE 15,740 16,120 15,950 17,380 18,040 1,559 - - 11,790 1,355 12,670 1,53
C110 13,930 14,190 14,040 15,290 15,270 1,372 - - 11,790 1,178 12,670 1,32
Q125 15,350 16,120 15,950 17,380 18,040 1,559 - - 11,790 1,355 12,670 1,53
Q125 HC 16,240 16,120 15,950 17,380 18,040 1,559 - - 11,790 1,355 12,670 1,53 Q125 HCE 16,240 17,410 17,230 18,770 18,820 1,683 - - 11,790 1,434 12,670 1,6
N80 11,510 10,920 10,800 11,730 10,390 1,051 - - 10,490 962 9,790 1,15
L80 11,510 10,920 10,800 11,730 11,960 1,051 - - 10,490 947 9,790 1,10
L80 1Cr 11,510 10,920 10,800 11,730 11,960 1,051 - - 10,490 947 9,790 1,10
L80 HC 12,590 10,920 10,800 11,730 11,960 1,051 - - 10,490 947 9,790 1,10
L80 IRP 11,510 10,920 10,800 11,730 11,960 1,051 - - 10,490 947 9,790 1,10
L80 HCE 12,590 11,950 11,810 12,830 11,960 1,150 - - 11,470 1,009 10,710 1,13
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 80/124
Casing Dimensions andMinimum Performance Properties
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
7 5/8 45.30 44.71 0.595 13.141 6.310 N/A
7 5/8 47.10 46.77 0.625 13.744 6.250 N/A
7 5/8 51.20 50.95 0.687 14.974 6.126 N/A
pg. 64 / Vallourec USA Corporation / Performance Data 7 5/8” -10 3/4”
C90 12,950 12,290 12,150 13,190 13,940 1,183 - - 11,790 1,045 11,010 1,18
R95 13,670 12,970 12,820 13,930 13,310 1,248 - - 11,790 1,101 11,620 1,25
T95 13,670 12,970 12,820 13,930 14,730 1,248 - - 11,790 1,101 11,620 1,25
T95 HC 14,290 12,970 12,820 13,930 14,730 1,248 - - 11,790 1,101 11,620 1,25
T95 E 13,670 13,660 13,490 14,660 14,730 1,314 - - 11,790 1,142 12,240 1,27
T95 HCE 14,290 13,660 13,490 14,660 14,730 1,314 - - 11,790 1,142 12,240 1,27
P110 15,440 15,020 14,840 16,120 17,640 1,445 - - 11,790 1,285 12,670 1,47
P110 MS 15,440 15,020 14,840 16,120 17,640 1,445 - - 11,790 1,285 12,670 1,47
P110 EC 17,270 17,070 16,870 18,320 19,170 1,643 - - 11,790 1,439 12,670 1,6
P110 HCE 17,270 17,070 16,870 18,320 19,170 1,643 - - 11,790 1,439 12,670 1,6
C110 15,440 15,020 14,840 16,120 16,230 1,445 - - 11,790 1,251 12,670 1,39
Q125 17,110 17,070 16,870 18,320 19,170 1,643 - - 11,790 1,439 12,670 1,6
Q125 HC 18,160 17,070 16,870 18,320 19,170 1,643 - - 11,790 1,439 12,670 1,6
Q125 HCE 18,160 18,440 18,220 19,790 20,000 1,774 - - 11,790 1,523 12,670 1,69
N80 12,040 11,480 11,330 12,270 10,940 1,100 - - 10,490 1,013 9,790 1,20
L80 12,040 11,480 11,330 12,270 12,610 1,100 - - 10,490 997 9,790 1,16
L80 1Cr 12,040 11,480 11,330 12,270 12,610 1,100 - - 10,490 997 9,790 1,16
L80 HC 13,170 11,480 11,330 12,270 12,610 1,100 - - 10,490 997 9,790 1,16
L80 IRP 12,040 11,480 11,330 12,270 12,610 1,100 - - 10,490 997 9,790 1,16
L80 HCE 13,170 12,550 12,390 13,420 12,610 1,203 - - 11,470 1,062 10,710 1,17
C90 13,540 12,910 12,740 13,810 14,690 1,237 - - 11,790 1,100 11,010 1,23
R95 14,300 13,630 13,450 14,570 14,020 1,306 - - 11,790 1,159 11,620 1,30
T95 14,300 13,630 13,450 14,570 15,520 1,306 - - 11,790 1,159 11,620 1,30
T95 HC 15,050 13,630 13,450 14,570 15,520 1,306 - - 11,790 1,159 11,620 1,30
T95 E 14,300 14,340 14,160 15,340 15,520 1,374 - - 11,790 1,202 12,240 1,30
T95 HCE 15,050 14,340 14,160 15,340 15,520 1,374 - - 11,790 1,202 12,240 1,30
P110 16,550 15,780 15,570 16,880 18,600 1,512 - - 11,790 1,353 12,670 1,54
P110 MS 16,550 15,780 15,570 16,880 18,600 1,512 - - 11,790 1,353 12,670 1,54
P110 EC 18,700 17,930 17,700 19,180 20,210 1,718 - - 11,790 1,515 12,670 1,67 P110 HCE 18,700 17,930 17,700 19,180 20,210 1,718 - - 11,790 1,515 12,670 1,67
C110 16,550 15,780 15,570 16,880 17,110 1,512 - - 11,790 1,317 12,670 1,42
Q125 18,700 17,930 17,700 19,180 20,210 1,718 - - 11,790 1,515 12,670 1,67
Q125 HC 19,900 17,930 17,700 19,180 20,210 1,718 - - 11,790 1,515 12,670 1,67
Q125 HCE 19,900 19,360 19,110 20,710 21,080 1,856 - - 11,790 1,603 12,670 1,73
N80 13,120 12,610 12,420 13,390 12,090 1,198 - - - - - -
L80 13,120 12,610 12,420 13,390 13,950 1,198 - - - - - -
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 81/124
Casing Dimensions andMinimum Performance Properties
Vallourec USA Corporation / Performance Data 7 5/8” -10 3/4” / pg.
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
7 5/8 51.20 50.95 0.687 14.974 6.126 N/A
7 5/8 55.30 55.12 0.750 16.199 6.000 N/A
L80 1Cr 13,120 12,610 12,420 13,390 13,950 1,198 - - - - - -
L80 HC 14,350 12,610 12,420 13,390 13,950 1,198 - - - - - -
L80 IRP 13,120 12,610 12,420 13,390 13,950 1,198 - - - - - -
L80 HCE 14,350 13,800 13,580 14,640 13,950 1,310 - - - - - -
C90 14,760 14,190 13,970 15,060 16,270 1,348 - - - - - -
R95 15,580 14,980 14,740 15,900 15,510 1,423 - - - - - -
T95 15,580 14,980 14,740 15,900 17,190 1,423 - - - - - -
T95 HC 16,430 14,980 14,740 15,900 17,190 1,423 - - - - - -
T95 E 15,580 15,770 15,520 16,730 17,190 1,497 - - - - - -
T95 HCE 16,430 15,770 15,520 16,730 17,190 1,497 - - - - - -
P110 18,040 17,340 17,070 18,410 20,590 1,647 - - - - - -
P110 MS 18,040 17,340 17,070 18,410 20,590 1,647 - - - - - -
P110 EC 20,500 19,710 19,400 20,920 22,370 1,872 - - - - - -
P110 HCE 20,500 19,710 19,400 20,920 22,370 1,872 - - - - - -
C110 18,040 17,340 17,070 18,410 18,940 1,647 - - - - - -
Q125 20,500 19,710 19,400 20,920 22,370 1,872 - - - - - -
Q125 HC 22,130 19,710 19,400 20,920 22,370 1,872 - - - - - -
Q125 HCE 22,130 21,290 20,950 22,590 23,340 2,022 - - - - - -
N80 14,190 13,770 13,510 14,500 13,270 1,296 - - - - - -
L80 14,190 13,770 13,510 14,500 15,330 1,296 - - - - - -
L80 1Cr 14,190 13,770 13,510 14,500 15,330 1,296 - - - - - -
L80 HC 15,520 13,770 13,510 14,500 15,330 1,296 - - - - - -
L80 IRP 14,190 13,770 13,510 14,500 15,330 1,296 - - - - - -
L80 HCE 15,520 15,060 14,780 15,860 15,330 1,417 - - - - - -
C90 15,960 15,490 15,200 16,310 17,890 1,458 - - - - - -
R95 16,850 16,350 16,050 17,220 17,050 1,539 - - - - - -
T95 16,850 16,350 16,050 17,220 18,900 1,539 - - - - - -
T95 HC 18,130 16,350 16,050 17,220 18,900 1,539 - - - - - -
T95 E 16,850 17,210 16,890 18,130 18,900 1,620 - - - - - - T95 HCE 18,130 17,210 16,890 18,130 18,900 1,620 - - - - - -
P110 19,510 18,930 18,580 19,940 22,640 1,782 - - - - - -
P110 MS 19,510 18,930 18,580 19,940 22,640 1,782 - - - - - -
P110 EC 22,170 21,520 21,110 22,660 24,610 2,025 - - - - - -
P110 HCE 22,470 21,520 21,110 22,660 24,610 2,025 - - - - - -
C110 19,510 18,930 18,580 19,940 20,830 1,782 - - - - - -
Q125 22,170 21,520 21,110 22,660 24,610 2,025 - - - - - -
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 82/124
Casing Dimensions andMinimum Performance Properties
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
7 5/8 55.30 55.12 0.750 16.199 6.000 N/A
7 3/4 46.10 45.51 0.595 13.374 6.435 6.500
7 3/4 48.02 47.60 0.625 13.990 6.375 N/A
pg. 66 / Vallourec USA Corporation / Performance Data 7 5/8” -10 3/4”
Q125 HC 23,950 21,520 21,110 22,660 24,610 2,025 - - - - - -
Q125 HCE 23,950 23,240 22,800 24,470 25,670 2,187 - - - - - -
N80 11,340 10,750 10,630 11,550 10,210 1,070 - - - - - -
L80 11,340 10,750 10,630 11,550 11,760 1,070 - - - - - -
L80 1Cr 11,340 10,750 10,630 11,550 11,760 1,070 - - - - - -
L80 HC 12,400 10,750 10,630 11,550 11,760 1,070 - - - - - -
L80 IRP 11,340 10,750 10,630 11,550 11,760 1,070 - - - - - -
L80 HCE 12,400 11,760 11,620 12,630 11,760 1,170 - - - - - -
C90 12,750 12,090 11,950 13,000 13,700 1,204 - - - - - -
R95 13,320 12,760 12,620 13,720 13,080 1,271 - - - - - -
T95 13,320 12,760 12,620 13,720 14,470 1,271 - - - - - -
T95 HC 13,900 12,760 12,620 13,720 14,470 1,271 - - - - - -
T95 E 13,320 13,440 13,280 14,440 14,470 1,337 - - - - - -
T95 HCE 13,900 13,440 13,280 14,440 14,470 1,337 - - - - - -
P110 15,000 14,780 14,610 15,880 17,340 1,471 - - - - - -
P110 MS 15,000 14,780 14,610 15,880 17,340 1,471 - - - - - -
P110 EC 16,600 16,790 16,600 18,050 18,840 1,672 - - - - - -
P110 HCE 16,790 16,790 16,600 18,050 18,840 1,672 - - - - - -
C110 15,000 14,780 14,610 15,880 15,950 1,471 - - - - - -
Q125 16,600 16,790 16,600 18,050 18,840 1,672 - - - - - -
Q125 HC 17,760 16,790 16,600 18,050 18,840 1,672 - - - - - -
Q125 HCE 17,760 18,140 17,930 19,490 19,660 1,806 - - - - - -
N80 11,860 11,290 11,150 12,090 10,750 1,119 - - - - - -
L80 11,860 11,290 11,150 12,090 12,390 1,119 - - - - - -
L80 1Cr 11,860 11,290 11,150 12,090 12,390 1,119 - - - - - -
L80 HC 12,970 11,290 11,150 12,090 12,390 1,119 - - - - - -
L80 IRP 11,860 11,290 11,150 12,090 12,390 1,119 - - - - - -
L80 HCE 12,970 12,350 12,190 13,220 12,390 1,224 - - - - - -
C90 13,350 12,700 12,540 13,600 14,440 1,259 - - - - - - R95 14,090 13,410 13,240 14,360 13,780 1,329 - - - - - -
T95 14,090 13,410 13,240 14,360 15,260 1,329 - - - - - -
T95 HC 14,830 13,410 13,240 14,360 15,260 1,329 - - - - - -
T95 E 14,090 14,110 13,940 15,110 15,260 1,399 - - - - - -
T95 HCE 14,830 14,110 13,940 15,110 15,260 1,399 - - - - - -
P110 16,310 15,520 15,330 16,620 18,270 1,539 - - - - - -
P110 MS 16,310 15,520 15,330 16,620 18,270 1,539 - - - - - -
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 83/124
Casing Dimensions andMinimum Performance Properties
Vallourec USA Corporation / Performance Data 7 5/8” -10 3/4” / pg.
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
7 3/4 48.02 47.60 0.625 13.990 6.375 N/A
8 5/8 32.00 31.13 0.352 9.149 7.796 7.875
8 5/8 36.00 35.17 0.400 10.336 7.700 N/A
P110 EC 18,160 17,640 17,420 18,890 19,860 1,749 - - - - - -
P110 HCE 18,160 17,640 17,420 18,890 19,860 1,749 - - - - - -
C110 16,310 15,520 15,330 16,620 16,810 1,539 - - - - - -
Q125 18,160 17,640 17,420 18,890 19,860 1,749 - - - - - -
Q125 HC 19,320 17,640 17,420 18,890 19,860 1,749 - - - - - -
Q125 HCE 19,320 19,050 18,810 20,400 20,720 1,889 - - - - - -
J55 2,530 3,930 3,920 4,360 3,930 503 3,930 372 3,930 417 3,930 57
K55 2,530 3,930 3,920 4,360 4,980 503 3,930 402 3,930 452 3,930 69
VST55 HC 2,850 5,000 4,980 5,550 5,240 640 5,000 528 5,000 591 5,000 79
N80 3,050 5,710 5,700 6,350 5,300 732 5,710 528 5,710 591 5,710 79
L80 3,050 5,710 5,700 6,350 6,080 732 5,710 521 5,710 583 5,710 76
L80 1Cr 3,050 5,710 5,700 6,350 6,080 732 5,710 521 5,710 583 5,710 76
L80 HC 3,180 5,710 5,700 6,350 6,080 732 5,710 521 5,710 583 5,710 76
L80 IRP 3,050 5,710 5,700 6,350 6,080 732 5,710 521 5,710 583 5,710 76
L80 HCE 3,180 6,250 6,230 6,940 6,080 801 6,250 556 6,250 622 6,250 78
C90 3,210 6,430 6,410 7,140 7,060 823 6,430 575 6,430 643 6,430 82
R95 3,290 6,780 6,760 7,540 6,760 869 6,780 607 6,780 678 6,780 86
T95 3,290 6,780 6,760 7,540 7,460 869 6,780 607 6,780 678 6,780 86
T95 HC 4,120 6,780 6,760 7,540 7,460 869 6,780 607 6,780 678 6,780 86
T95 E 3,290 7,140 7,120 7,930 7,460 915 7,140 630 7,140 704 7,140 87
T95 HCE 4,120 7,140 7,120 7,930 7,460 915 7,140 630 7,140 704 7,140 87
J55 3,450 4,460 4,450 4,930 4,480 568 4,460 434 4,460 486 4,460 65
K55 3,450 4,460 4,450 4,930 5,680 568 4,460 468 4,460 526 4,460 78
VST55 HC 3,880 5,680 5,660 6,280 5,970 724 5,680 615 5,680 688 5,680 89
N80 4,100 6,490 6,470 7,180 6,050 827 6,490 615 6,490 688 6,490 89
L80 4,100 6,490 6,470 7,180 6,940 827 6,490 606 6,490 678 6,490 86
L80 1Cr 4,100 6,490 6,470 7,180 6,940 827 6,490 606 6,490 678 6,490 86
L80 HC 4,220 6,490 6,470 7,180 6,940 827 6,490 606 6,490 678 6,490 86
L80 IRP 4,100 6,490 6,470 7,180 6,940 827 6,490 606 6,490 678 6,490 86 L80 HCE 4,220 7,100 7,070 7,850 6,940 904 7,100 647 7,100 724 7,100 88
C90 4,250 7,300 7,270 8,070 8,060 930 7,300 670 7,300 749 7,300 92
R95 4,360 7,710 7,680 8,520 7,710 982 7,710 706 7,710 789 7,710 97
T95 4,360 7,710 7,680 8,520 8,520 982 7,710 706 7,710 789 7,710 97
T95 HC 5,780 7,710 7,680 8,520 8,520 982 7,710 706 7,710 789 7,710 97
T95 E 4,360 8,120 8,080 8,970 8,520 1,034 8,120 734 8,120 820 8,120 99
T95 HCE 5,780 8,120 8,080 8,970 8,520 1,034 8,120 734 8,120 820 8,120 99
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 84/124
Casing Dimensions andMinimum Performance Properties
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
8 5/8 40.00 39.33 0.450 11.557 7.600 7.625
8 5/8 44.00 43.43 0.500 12.763 7.500 N/A
pg. 68 / Vallourec USA Corporation / Performance Data 7 5/8” -10 3/4”
N80 5,530 7,300 7,270 8,030 6,830 925 - - 7,300 788 7,300 1,00
L80 5,530 7,300 7,270 8,030 7,840 925 - - 7,300 776 7,300 96
L80 1Cr 5,530 7,300 7,270 8,030 7,840 925 - - 7,300 776 7,300 96
L80 HC 5,790 7,300 7,270 8,030 7,840 925 - - 7,300 776 7,300 96
L80 IRP 5,530 7,300 7,270 8,030 7,840 925 - - 7,300 776 7,300 96
L80 HCE 5,790 7,990 7,950 8,780 7,840 1,011 - - 7,990 829 7,990 99
C90 5,870 8,220 8,170 9,030 9,110 1,040 - - 8,220 858 8,220 1,03
R95 6,020 8,670 8,630 9,540 8,720 1,098 - - 8,670 904 8,670 1,09
T95 6,020 8,670 8,630 9,540 9,630 1,098 - - 8,670 904 8,670 1,09
T95 HC 7,560 8,670 8,630 9,540 9,630 1,098 - - 8,670 904 8,670 1,09
T95 E 6,020 9,130 9,080 10,040 9,630 1,156 - - 9,130 939 9,130 1,1
T95 HCE 7,560 9,130 9,080 10,040 9,630 1,156 - - 9,130 939 9,130 1,1
P110 6,400 10,040 9,990 11,040 11,530 1,271 - - 10,040 1,055 10,040 1,28
P110 MS 6,400 10,040 9,990 11,040 11,530 1,271 - - 10,040 1,055 10,040 1,28
P110 EC 8,140 11,410 11,350 12,550 12,530 1,445 - - 10,370 1,182 11,230 1,4
P110 HCE 8,380 11,410 11,350 12,550 12,530 1,445 - - 10,370 1,182 11,230 1,4
Q125 6,640 11,410 11,350 12,550 12,530 1,445 - - 10,370 1,182 11,230 1,4
Q125 HC 8,450 11,410 11,350 12,550 12,530 1,445 - - 10,370 1,182 11,230 1,4
Q125 HCE 8,450 12,330 12,260 13,550 13,080 1,560 - - 10,370 1,263 11,230 1,48
N80 6,950 8,120 8,060 8,880 7,620 1,021 - - 8,120 887 8,120 1,10
L80 6,950 8,120 8,060 8,880 8,750 1,021 - - 8,120 874 8,120 1,06
L80 1Cr 6,950 8,120 8,060 8,880 8,750 1,021 - - 8,120 874 8,120 1,06
L80 HC 7,360 8,120 8,060 8,880 8,750 1,021 - - 8,120 874 8,120 1,06
L80 IRP 6,950 8,120 8,060 8,880 8,750 1,021 - - 8,120 874 8,120 1,06
L80 HCE 7,360 8,880 8,820 9,710 8,750 1,117 - - 8,880 932 8,880 1,09
C90 7,490 9,130 9,070 9,980 10,180 1,149 - - 9,130 965 9,130 1,14
R95 7,740 9,640 9,570 10,540 9,730 1,212 - - 9,640 1,017 9,640 1,20
T95 7,740 9,640 9,570 10,540 10,750 1,212 - - 9,640 1,017 9,640 1,20
T95 HC 9,210 9,640 9,570 10,540 10,750 1,212 - - 9,640 1,017 9,640 1,20 T95 E 7,740 10,140 10,080 11,090 10,750 1,276 - - 10,140 1,056 10,140 1,22
T95 HCE 9,210 10,140 10,080 11,090 10,750 1,276 - - 10,140 1,056 10,140 1,22
P110 8,420 11,160 11,090 12,200 12,880 1,404 - - 10,370 1,186 11,160 1,42
P110 MS 8,420 11,160 11,090 12,200 12,880 1,404 - - 10,370 1,186 11,160 1,42
P110 EC 8,980 12,680 12,600 13,870 13,990 1,595 - - 10,370 1,330 11,230 1,56
P110 HCE 9,280 12,680 12,600 13,870 13,990 1,595 - - 10,370 1,330 11,230 1,56
Q125 8,980 12,680 12,600 13,870 13,990 1,595 - - 10,370 1,330 11,230 1,56
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 85/124
Casing Dimensions andMinimum Performance Properties
Vallourec USA Corporation / Performance Data 7 5/8” -10 3/4” / pg.
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
8 5/8 44.00 43.43 0.500 12.763 7.500 N/A
9 3/8 39.00 38.38 0.400 11.278 8.419 8.500
9 5/8 36.00 34.89 0.352 10.254 8.765 N/A
9 5/8 40.00 38.97 0.395 11.454 8.679 8.750
9 5/8 43.50 42.73 0.435 12.559 8.599 8.625
Q125 HC 9,280 12,680 12,600 13,870 13,990 1,595 - - 10,370 1,330 11,230 1,56
Q125 HCE 9,280 13,700 13,610 14,980 14,600 1,723 - - 10,370 1,421 11,230 1,64
P110 3,840 8,210 8,180 9,110 9,350 1,241 - - - - - -
P110 MS 3,840 8,210 8,180 9,110 9,350 1,241 - - - - - -
P110 EC 3,960 9,330 9,300 10,350 10,160 1,410 - - - - - -
P110 HCE 4,820 9,330 9,300 10,350 10,160 1,410 - - - - - -
Q125 3,960 9,330 9,300 10,350 10,160 1,410 - - - - - -
Q125 HC 4,860 9,330 9,300 10,350 10,160 1,410 - - - - - -
Q125 HCE 4,860 10,080 10,040 11,180 10,610 1,523 - - - - - -
J55 2,020 3,520 3,510 3,920 3,510 564 3,520 394 3,520 453 3,520 63
K55 2,020 3,520 3,510 3,920 4,450 564 3,520 423 3,520 489 3,520 75
VST55 HC 2,260 4,480 4,470 5,000 4,680 718 4,480 559 4,480 643 4,480 87
N80 2,370 5,120 5,110 5,710 4,740 820 5,120 559 5,120 643 5,120 87
J55 2,570 3,950 3,940 4,390 3,950 630 3,950 452 3,950 520 3,950 71
K55 2,570 3,950 3,940 4,390 5,000 630 3,950 486 3,950 561 3,950 84
VST55 HC 2,880 5,030 5,010 5,580 5,270 802 5,030 642 5,030 737 5,030 97
N80 3,090 5,750 5,730 6,380 5,330 916 5,750 642 5,750 737 5,750 97
L80 3,090 5,750 5,730 6,380 6,110 916 5,750 633 5,750 727 5,750 94
L80 1Cr 3,090 5,750 5,730 6,380 6,110 916 5,750 633 5,750 727 5,750 94
L80 HC 3,220 5,750 5,730 6,380 6,110 916 5,750 633 5,750 727 5,750 94
L80 IRP 3,090 5,750 5,730 6,380 6,110 916 5,750 633 5,750 727 5,750 94
L80 HCE 3,220 6,280 6,260 6,980 6,110 1,002 6,280 677 6,280 777 6,280 97
C90 3,260 6,460 6,440 7,180 7,100 1,031 6,460 700 6,460 804 6,460 1,02
R95 3,330 6,820 6,800 7,580 6,800 1,088 6,820 738 6,820 847 6,820 1,07
T95 3,330 6,820 6,800 7,580 7,500 1,088 6,820 738 6,820 847 6,820 1,07
T95 HC 4,190 6,820 6,800 7,580 7,500 1,088 6,820 738 6,820 847 6,820 1,07
T95 E 3,330 7,180 7,160 7,980 7,500 1,145 7,180 768 7,180 881 7,180 1,09
T95 HCE 4,190 7,180 7,160 7,980 7,500 1,145 7,180 768 7,180 881 7,180 1,0
P110 3,470 7,900 7,870 8,770 8,980 1,260 7,900 861 7,900 988 7,900 1,26 P110 MS 3,470 7,900 7,870 8,770 8,980 1,260 7,900 861 7,900 988 7,900 1,2
P110 EC 3,530 8,980 8,950 9,970 9,760 1,432 8,980 966 8,980 1,108 8,980 1,39
P110 HCE 3,630 8,980 8,950 9,970 9,760 1,432 8,980 966 8,980 1,108 8,980 1,39
Q125 3,530 8,980 8,950 9,970 9,760 1,432 8,980 966 8,980 1,108 8,980 1,39
Q125 HC 3,630 8,980 8,950 9,970 9,760 1,432 8,980 966 8,980 1,108 8,980 1,39
Q125 HCE 3,630 9,700 9,660 10,770 10,190 1,546 9,670 1,033 9,700 1,185 9,160 1,46
N80 3,810 6,330 6,300 7,000 5,890 1,005 - - 6,330 825 6,330 1,07
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 86/124
Casing Dimensions andMinimum Performance Properties
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
9 5/8 43.50 42.73 0.435 12.559 8.599 8.625
9 5/8 47.00 46.18 0.472 13.572 8.525 8.625
pg. 70/ Vallourec USA Corporation / Performance Data 7 5/8” -10 3/4”
L80 3,810 6,330 6,300 7,000 6,750 1,005 - - 6,330 813 6,330 1,03
L80 1Cr 3,810 6,330 6,300 7,000 6,750 1,005 - - 6,330 813 6,330 1,03
L80 HC 3,950 6,330 6,300 7,000 6,750 1,005 - - 6,330 813 6,330 1,03
L80 IRP 3,810 6,330 6,300 7,000 6,750 1,005 - - 6,330 813 6,330 1,03
L80 HCE 3,950 6,920 6,890 7,660 6,750 1,099 - - 6,920 869 6,920 1,07
C90 4,010 7,120 7,090 7,880 7,850 1,130 - - 7,120 899 7,120 1,1
R95 4,130 7,510 7,480 8,310 7,510 1,193 - - 7,510 948 7,510 1,17
T95 4,130 7,510 7,480 8,310 8,290 1,193 - - 7,510 948 7,510 1,17
T95 HC 5,410 7,510 7,480 8,310 8,290 1,193 - - 7,510 948 7,510 1,17
T95 E 4,130 7,910 7,880 8,750 8,290 1,256 - - 7,910 985 7,910 1,20
T95 HCE 5,410 7,910 7,880 8,750 8,290 1,256 - - 7,910 985 7,910 1,20
P110 4,420 8,700 8,670 9,630 9,930 1,381 - - 8,700 1,105 8,700 1,38
P110 MS 4,420 8,700 8,670 9,630 9,930 1,381 - - 8,700 1,105 8,700 1,38
P110 EC 5,770 9,890 9,850 10,940 10,790 1,570 - - 9,700 1,240 9,160 1,52
P110 HCE 5,940 9,890 9,850 10,940 10,790 1,570 - - 9,700 1,240 9,160 1,52
C110 4,420 8,700 8,670 9,630 9,140 1,381 - - 8,700 1,082 8,700 1,3
Q125 4,620 9,890 9,850 10,940 10,790 1,570 - - 9,700 1,240 9,160 1,52
Q125 HC 5,940 9,890 9,850 10,940 10,790 1,570 - - 9,700 1,240 9,160 1,52
Q125 HCE 5,940 10,680 10,640 11,810 11,260 1,695 - - 9,700 1,325 9,160 1,60
N80 4,760 6,870 6,830 7,570 6,410 1,086 - - 6,870 905 6,870 1,16
L80 4,760 6,870 6,830 7,570 7,350 1,086 - - 6,870 893 6,870 1,12
L80 1Cr 4,760 6,870 6,830 7,570 7,350 1,086 - - 6,870 893 6,870 1,12
L80 HC 4,940 6,870 6,830 7,570 7,350 1,086 - - 6,870 893 6,870 1,12
L80 IRP 4,760 6,870 6,830 7,570 7,350 1,086 - - 6,870 893 6,870 1,12
L80 HCE 4,940 7,510 7,470 8,280 7,350 1,188 - - 7,510 954 7,510 1,15
C90 4,990 7,720 7,690 8,520 8,540 1,222 - - 7,720 987 7,720 1,2
R95 5,090 8,150 8,110 8,990 8,170 1,289 - - 8,150 1,040 8,150 1,27
T95 5,090 8,150 8,110 8,990 9,020 1,289 - - 8,150 1,040 8,150 1,27
T95 HC 6,600 8,150 8,110 8,990 9,020 1,289 - - 8,150 1,040 8,150 1,27 T95 E 5,090 8,580 8,540 9,460 9,020 1,357 - - 8,460 1,081 8,580 1,29
T95 HCE 6,600 8,580 8,540 9,460 9,020 1,357- - - 8,460 1,081 8,580 1,29
P110 5,300 9,440 9,400 10,410 10,810 1,493 - - 9,440 1,213 9,160 1,50
P110 MS 5,300 9,440 9,400 10,410 10,810 1,493 - - 9,440 1,213 9,160 1,50
P110 EC 7,310 10,730 10,680 11,830 11,750 1,697 - - 9,700 1,361 9,160 1,6
P110 HCE 7,530 10,730 10,680 11,830 11,750 1,697 - - 9,700 1,361 9,160 1,65
C110 5,300 9,440 9,400 10,410 9,950 1,493 - - 9,440 1,188 9,160 1,42
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 87/124
Casing Dimensions andMinimum Performance Properties
Vallourec USA Corporation / Performance Data 7 5/8” -10 3/4” / pg.
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
9 5/8 47.00 46.18 0.472 13.572 8.525 8.625
9 5/8 53.50 52.90 0.545 15.546 8.379 8.500
9 5/8 58.40 57.44 0.595 16.879 8.279 8.375
Q125 5,630 10,730 10,680 11,830 11,750 1,697 - - 9,700 1,361 9,160 1,65
Q125 HC 7,530 10,730 10,680 11,830 11,750 1,697 - - 9,700 1,361 9,160 1,65
Q125 HCE 7,530 11,590 11,530 12,770 12,260 1,832 - - 9,700 1,455 9,160 1,73
N80 6,620 7,930 7,880 8,680 7,430 1,244 - - 7,930 1,062 7,930 1,32
L80 6,620 7,930 7,880 8,680 8,540 1,244 - - 7,930 1,047 7,930 1,28
L80 1Cr 6,620 7,930 7,880 8,680 8,540 1,244 - - 7,930 1,047 7,930 1,28
L80 HC 7,000 7,930 7,880 8,680 8,540 1,244 - - 7,930 1,047 7,930 1,28
L80 IRP 6,620 7,930 7,880 8,680 8,540 1,244 - - 7,930 1,047 7,930 1,28
L80 HCE 7,000 8,670 8,620 9,490 8,540 1,360 - - 8,460 1,118 8,670 1,32
C90 7,110 8,920 8,860 9,760 9,930 1,399 - - 8,460 1,157 8,920 1,38
R95 7,340 9,410 9,360 10,310 9,490 1,477 - - 8,460 1,220 9,160 1,45
T95 7,340 9,410 9,360 10,310 10,490 1,477 - - 8,460 1,220 9,160 1,45
T95 HC 8,850 9,410 9,360 10,310 10,490 1,477 - - 8,460 1,220 9,160 1,45
T95 E 7,340 9,910 9,850 10,850 10,490 1,555 - - 8,460 1,267 9,160 1,48
T95 HCE 8,850 9,910 9,850 10,850 10,490 1,555 - - 8,460 1,267 9,160 1,48
P110 7,950 10,900 10,830 11,930 12,560 1,710 - - 9,700 1,422 9,160 1,7
P110 MS 7,950 10,900 10,830 11,930 12,560 1,710 - - 9,700 1,422 9,160 1,7
P110 EC 9,140 12,390 12,310 13,560 13,650 1,943 - - 9,700 1,595 9,160 1,8
P110 HCE 9,390 12,390 12,310 13,560 13,650 1,943 - - 9,700 1,595 9,160 1,89
C110 7,950 10,900 10,830 11,930 11,560 1,710 - - 9,700 1,393 9,160 1,63
Q125 8,440 12,390 12,310 13,560 13,650 1,943 - - 9,700 1,595 9,160 1,89
Q125 HC 9,700 12,390 12,310 13,560 13,650 1,943 - - 9,700 1,595 9,160 1,89
Q125 HCE 9,700 13,380 13,290 14,650 14,250 2,099 - - 9,700 1,706 9,160 1,99
N80 7,900 8,650 8,590 9,430 8,140 1,350 - - 8,460 1,167 8,650 1,44
L80 7,900 8,650 8,590 9,430 9,360 1,350 - - 8,460 1,151 8,650 1,39
L80 1Cr 7,900 8,650 8,590 9,430 9,360 1,350 - - 8,460 1,151 8,650 1,39
L80 HC 8,400 8,650 8,590 9,430 9,360 1,350 - - 8,460 1,151 8,650 1,39
L80 IRP 7,900 8,650 8,590 9,430 9,360 1,350 - - 8,460 1,151 8,650 1,39
L80 HCE 8,400 9,470 9,400 10,320 9,360 1,477 - - 8,460 1,229 9,160 1,44 C90 8,560 9,740 9,660 10,610 10,890 1,519 - - 8,460 1,272 9,160 1,50
R95 8,880 10,280 10,200 11,200 10,410 1,604 - - 8,460 1,341 9,160 1,58
T95 8,880 10,280 10,200 11,200 11,500 1,604 - - 8,460 1,341 9,160 1,58
T95 HC 10,210 10,280 10,200 11,200 11,500 1,604 - - 8,460 1,341 9,160 1,5
T95 E 8,880 10,820 10,740 11,790 11,500 1,688 - - 8,460 1,393 9,160 1,6
T95 HCE 10,210 10,820 10,740 11,790 11,500 1,688 - - 8,460 1,393 9,160 1,6
P110 9,770 11,900 11,810 12,970 13,780 1,857 - - 9,700 1,564 9,160 1,86
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 88/124
Casing Dimensions andMinimum Performance Properties
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
9 5/8 58.40 57.44 0.595 16.879 8.279 8.375
9 5/8 59.40 58.70 0.609 17.250 8.251 N/A
9 7/8 62.80 61.80 0.625 18.162 8.469 8.500
pg. 72/ Vallourec USA Corporation / Performance Data 7 5/8” -10 3/4”
P110 MS 9,770 11,900 11,810 12,970 13,780 1,857 - - 9,700 1,564 9,160 1,8
P110 EC 10,540 13,520 13,420 14,740 14,970 2,110 - - 9,700 1,754 9,160 2,0
P110 HCE 10,740 13,520 13,420 14,740 14,970 2,110 - - 9,700 1,754 9,160 2,05
C110 9,770 11,900 11,810 12,970 12,680 1,857 - - 9,700 1,531 9,160 1,77
Q125 10,540 13,520 13,420 14,740 14,970 2,110 - - 9,700 1,754 9,160 2,05
Q125 HC 10,980 13,520 13,420 14,740 14,970 2,110 - - 9,700 1,754 9,160 2,05
Q125 HCE 10,980 14,600 14,500 15,910 15,620 2,279 - - 9,700 1,875 9,160 2,16
N80 8,250 8,860 8,790 9,640 8,340 1,380 - - - - - -
L80 8,250 8,860 8,790 9,640 9,590 1,380 - - - - - -
L80 1Cr 8,250 8,860 8,790 9,640 9,590 1,380 - - - - - -
L80 HC 8,800 8,860 8,790 9,640 9,590 1,380 - - - - - -
L80 IRP 8,250 8,860 8,790 9,640 9,590 1,380 - - - - - -
L80 HCE 8,800 9,690 9,610 10,540 9,590 1,509 - - - - - -
C90 8,970 9,970 9,890 10,850 11,160 1,552 - - - - - -
R95 9,320 10,520 10,440 11,450 10,660 1,639 - - - - - -
T95 9,320 10,520 10,440 11,450 11,790 1,639 - - - - - -
T95 HC 10,570 10,520 10,440 11,450 11,790 1,639 - - - - - -
T95 E 9,320 11,070 10,990 12,050 11,790 1,725 - - - - - -
T95 HCE 10,570 11,070 10,990 12,050 11,790 1,725 - - - - - -
P110 10,280 12,180 12,090 13,260 14,120 1,897 - - - - - -
P110 MS 10,280 12,180 12,090 13,260 14,120 1,897 - - - - - -
P110 EC 11,130 13,840 13,730 15,060 15,340 2,156 - - - - - -
P110 HCE 11,500 13,840 13,730 15,060 15,340 2,156 - - - - - -
C110 10,280 12,180 12,090 13,260 12,990 1,897 - - - - - -
Q125 11,130 13,840 13,730 15,060 15,340 2,156 - - - - - -
Q125 HC 11,630 13,840 13,730 15,060 15,340 2,156 - - - - - -
Q125 HCE 11,630 14,950 14,830 16,270 16,010 2,329 - - - - - -
N80 8,260 8,860 8,790 9,640 8,340 1,453 - - - - - -
L80 8,260 8,860 8,790 9,640 9,590 1,453 - - - - - - L80 1Cr 8,260 8,860 8,790 9,640 9,590 1,453 - - - - - -
L80 HC 8,800 8,860 8,790 9,640 9,590 1,453 - - - - - -
L80 IRP 8,260 8,860 8,790 9,640 9,590 1,453 - - - - - -
L80 HCE 8,800 9,690 9,620 10,550 9,590 1,589 - - - - - -
C90 8,980 9,970 9,890 10,850 11,160 1,635 - - - - - -
R95 9,320 10,520 10,440 11,450 10,670 1,725 - - - - - -
T95 9,320 10,520 10,440 11,450 11,790 1,725 - - - - - -
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 89/124
Casing Dimensions andMinimum Performance Properties
Vallourec USA Corporation / Performance Data 7 5/8” -10 3/4” / pg.
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
9 7/8 62.80 61.80 0.625 18.162 8.469 8.500
9 7/8 65.30 64.10 0.650 18.838 8.419 8.500
9 7/8 68.90 68.66 0.700 20.177 8.319 N/A
T95 HC 10,570 10,520 10,440 11,450 11,790 1,725 - - - - - -
T95 E 9,320 11,080 10,990 12,050 11,790 1,816 - - - - - -
T95 HCE 10,570 11,080 10,990 12,050 11,790 1,816 - - - - - -
P110 10,290 12,180 12,090 13,260 14,120 1,998 - - - - - -
P110 MS 10,290 12,180 12,090 13,260 14,120 1,998 - - - - - -
P110 EC 11,250 13,840 13,740 15,070 15,350 2,270 - - - - - -
P110 HCE 11,460 13,840 13,740 15,070 15,350 2,270 - - - - - -
C110 10,290 12,180 12,090 13,260 12,990 1,998 - - - - - -
Q125 11,140 13,840 13,740 15,070 15,350 2,270 - - - - - -
Q125 HC 11,640 13,840 13,740 15,070 15,350 2,270 - - - - - -
Q125 HCE 11,640 14,950 14,840 16,270 16,020 2,452 - - - - - -
N80 8,880 9,220 9,140 10,010 8,690 1,507 - - - - - -
L80 8,880 9,220 9,140 10,010 10,000 1,507 - - - - - -
L80 1Cr 8,880 9,220 9,140 10,010 10,000 1,507 - - - - - -
L80 HC 9,490 9,220 9,140 10,010 10,000 1,507 - - - - - -
L80 IRP 8,880 9,220 9,140 10,010 10,000 1,507 - - - - - -
L80 HCE 9,490 10,080 9,990 10,940 10,000 1,648 - - - - - -
C90 9,680 10,370 10,280 11,260 11,630 1,695 - - - - - -
R95 10,070 10,940 10,850 11,880 11,120 1,790 - - - - - -
T95 10,070 10,940 10,850 11,880 12,290 1,790 - - - - - -
T95 HC 12,040 10,940 10,850 11,880 12,290 1,790 - - - - - -
T95 E 10,070 11,520 11,420 12,510 12,290 1,884 - - - - - -
T95 HCE 12,040 11,520 11,420 12,510 12,290 1,884 - - - - - -
P110 11,170 12,670 12,560 13,760 14,720 2,072 - - - - - -
P110 MS 11,170 12,670 12,560 13,760 14,720 2,072 - - - - - -
P110 EC 12,160 14,400 14,280 15,630 16,000 2,355 - - - - - -
P110 HCE 12,560 14,400 14,280 15,630 16,000 2,355 - - - - - -
C110 11,170 12,670 12,560 13,760 13,540 2,072 - - - - - -
Q125 12,160 14,400 14,280 15,630 16,000 2,355 - - - - - - Q125 HC 12,760 14,400 14,280 15,630 16,000 2,355 - - - - - -
Q125 HCE 12,760 15,550 15,420 16,880 16,690 2,543 - - - - - -
N80 10,120 9,920 9,830 10,720 9,390 1,614 - - - - - -
L80 10,120 9,920 9,830 10,720 10,810 1,614 - - - - - -
L80 1Cr 10,120 9,920 9,830 10,720 10,810 1,614 - - - - - -
L80 HC 10,860 9,920 9,830 10,720 10,810 1,614 - - - - - -
L80 IRP 10,120 9,920 9,830 10,720 10,810 1,614 - - - - - -
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 90/124
Casing Dimensions andMinimum Performance Properties
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
9 7/8 68.90 68.66 0.700 20.177 8.319 N/A
10 3/4 40.50 38.91 0.350 11.435 9.894 9.925
10 1/8 80.00 79.29 0.795 23.302 8.379 8.500
10 3/4 45.50 44.26 0.400 13.006 9.794 9.875
pg. 74/ Vallourec USA Corporation / Performance Data 7 5/8” -10 3/4”
L80 HCE 10,860 10,850 10,750 11,730 10,810 1,765 - - - - - -
C90 11,100 11,160 11,060 12,060 12,580 1,816 - - - - - -
R95 11,580 11,780 11,670 12,740 12,020 1,917 - - - - - -
T95 11,580 11,780 11,670 12,740 13,300 1,917 - - - - - -
T95 HC 12,340 11,780 11,670 12,740 13,300 1,917 - - - - - -
T95 E 11,580 12,410 12,280 13,410 13,300 2,018 - - - - - -
T95 HCE 12,340 12,410 12,280 13,410 13,300 2,018 - - - - - -
P110 12,940 13,650 13,510 14,750 15,930 2,219 - - - - - -
P110 MS 12,940 13,650 13,510 14,750 15,930 2,219 - - - - - -
P110 EC 14,210 15,510 15,360 16,760 17,310 2,522 - - - - - -
P110 HCE 14,900 15,510 15,360 16,760 17,310 2,522 - - - - - -
C110 12,940 13,650 13,510 14,750 14,650 2,219 - - - - - -
Q125 14,210 15,510 15,360 16,760 17,310 2,522 - - - - - -
Q125 HC 15,000 15,510 15,360 16,760 17,310 2,522 - - - - - -
Q125 HCE 15,000 16,750 16,580 18,100 18,060 2,724 - - - - - -
P110 15,610 15,110 14,930 16,220 17,760 2,563 - - - - - -
P110 MS 15,610 15,110 14,930 16,220 17,760 2,563 - - - - - -
P110 EC 17,300 17,180 16,970 18,430 19,300 2,913 - - - - - -
P110 HCE 17,300 17,180 16,970 18,430 19,300 2,913 - - - - - -
C110 15,610 15,110 14,930 16,220 16,340 2,563 - - - - - -
Q125 17,300 17,180 16,970 18,430 19,300 2,913 - - - - - -
Q125 HC 18,370 17,180 16,970 18,430 19,300 2,913 - - - - - -
Q125 HCE 18,370 18,550 18,330 19,900 20,140 3,146 - - - - - -
J55 1,580 3,130 3,130 3,510 3,120 629 3,130 420 - - 3,130 70
K55 1,580 3,130 3,130 3,510 3,950 629 3,130 450 - - 3,130 81
VST55 HC 1,700 3,990 3,980 4,460 4,160 800 3,990 597 - - 3,990 96
J55 2,090 3,580 3,570 3,990 3,570 715 3,580 493 - - 3,580 79
K55 2,090 3,580 3,570 3,990 4,530 715 3,580 528 - - 3,580 93
VST55 HC 2,350 4,560 4,550 5,080 4,760 910 4,560 701 - - 4,560 1,09 N80 2,480 5,210 5,200 5,810 4,820 1,040 5,210 701 - - 5,210 1,09
L80 2,480 5,210 5,200 5,810 5,530 1,040 5,210 692 - - 5,210 1,06
L80 1Cr 2,480 5,210 5,200 5,810 5,530 1,040 5,210 692 - - 5,210 1,06
L80 HC 3,140 5,210 5,200 5,810 5,530 1,040 5,210 692 - - 5,210 1,06
L80 IRP 2,480 5,210 5,200 5,810 5,530 1,040 5,210 692 - - 5,210 1,06
L80 HCE 3,140 5,700 5,680 6,350 5,530 1,138 5,700 741 - - 5,700 1,10
C90 2,560 5,860 5,840 6,530 6,420 1,171 5,860 767 - - 5,860 1,14
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 91/124
Casing Dimensions andMinimum Performance Properties
Vallourec USA Corporation / Performance Data 7 5/8” -10 3/4” / pg.
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
10 3/4 45.50 44.26 0.400 13.006 9.794 9.875
10 3/4 51.00 49.55 0.450 14.561 9.694 N/A
10 3/4 55.50 54.26 0.495 15.947 9.604 9.625
R95 2,590 6,190 6,170 6,890 6,140 1,236 6,190 808 - - 6,190 1,20
T95 2,590 6,190 6,170 6,890 6,780 1,236 6,190 808 - - 6,190 1,20
T95 HC 3,180 6,190 6,170 6,890 6,780 1,236 6,190 808 - - 6,190 1,20
T95 E 2,590 6,510 6,490 7,260 6,780 1,301 6,510 841 - - 6,510 1,23
T95 HCE 3,180 6,510 6,490 7,260 6,780 1,301 6,510 841 - - 6,510 1,23
P110 2,610 7,160 7,140 7,980 8,120 1,431 7,160 941 - - 7,160 1,42
P110 MS 2,610 7,160 7,140 7,980 8,120 1,431 7,160 941 - - 7,160 1,42
P110 EC 3,450 8,140 8,120 9,070 8,820 1,626 7,890 1,057 - - 7,440 1,57
P110 HCE 3,450 8,140 8,120 9,070 8,820 1,626 7,890 1,057 - - 7,440 1,57
Q125 2,610 8,140 8,120 9,070 8,820 1,626 7,890 1,057 - - 7,440 1,57
Q125 HC 3,260 8,140 8,120 9,070 8,820 1,626 7,890 1,057 - - 7,440 1,57
Q125 HCE 3,260 8,790 8,770 9,800 9,210 1,756 7,890 1,132 - - 7,440 1,65
J55 2,700 4,030 4,020 4,470 4,030 801 4,030 565 - - 4,030 89
K55 2,700 4,030 4,020 4,470 5,110 801 4,030 606 - - 4,030 1,04
VST55 HC 2,990 5,130 5,110 5,690 5,380 1,019 5,130 804 - - 5,130 1,22
N80 3,220 5,860 5,840 6,500 5,440 1,165 5,860 804 - - 5,860 1,22
L80 3,220 5,860 5,840 6,500 6,240 1,165 5,860 794 - - 5,860 1,19
L80 1Cr 3,220 5,860 5,840 6,500 6,240 1,165 5,860 794 - - 5,860 1,19
L80 HC 3,360 5,860 5,840 6,500 6,240 1,165 5,860 794 - - 5,860 1,19
L80 IRP 3,220 5,860 5,840 6,500 6,240 1,165 5,860 794 - - 5,860 1,19
L80 HCE 3,360 6,410 6,390 7,110 6,240 1,274 6,410 850 - - 6,410 1,23
C90 3,400 6,590 6,570 7,320 7,250 1,311 6,590 879 - - 6,590 1,28
R95 3,490 6,960 6,940 7,720 6,940 1,383 6,870 927 - - 6,960 1,35
T95 3,490 6,960 6,940 7,720 7,660 1,383 6,870 927 - - 6,960 1,35
T95 HC 4,420 6,960 6,940 7,720 7,660 1,383 6,870 927 - - 6,960 1,35
T95 E 3,490 7,330 7,300 8,130 7,660 1,456 6,870 964 - - 7,330 1,38
T95 HCE 4,420 7,330 7,300 8,130 7,660 1,456 6,870 964 - - 7,330 1,38
P110 3,660 8,060 8,030 8,940 9,170 1,602 7,890 1,079 - - 7,440 1,59
P110 MS 3,660 8,060 8,030 8,940 9,170 1,602 7,890 1,079 - - 7,440 1,59 P110 EC 4,510 9,160 9,130 10,160 9,970 1,820 7,890 1,212 - - 7,440 1,75
P110 HCE 4,510 9,160 9,130 10,160 9,970 1,820 7,890 1,212 - - 7,440 1,75
Q125 3,740 9,160 9,130 10,160 9,970 1,820 7,890 1,212 - - 7,440 1,75
Q125 HC 4,600 9,160 9,130 10,160 9,970 1,820 7,890 1,212 - - 7,440 1,75
Q125 HCE 4,600 9,890 9,860 10,970 10,400 1,966 7,890 1,297 - - 7,440 1,85
N80 4,020 6,450 6,420 7,130 6,000 1,276 6,450 895 - - 6,450 1,34
L80 4,020 6,450 6,420 7,130 6,880 1,276 6,450 884 - - 6,450 1,30
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 92/124
Casing Dimensions andMinimum Performance Properties
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
10 3/4 55.50 54.26 0.495 15.947 9.604 9.625
10 3/4 60.70 59.45 0.545 17.473 9.504 N/A
pg. 76 / Vallourec USA Corporation / Performance Data 7 5/8” -10 3/4”
L80 1Cr 4,020 6,450 6,420 7,130 6,880 1,276 6,450 884 - - 6,450 1,30
L80 HC 4,130 6,450 6,420 7,130 6,880 1,276 6,450 884 - - 6,450 1,30
L80 IRP 4,020 6,450 6,420 7,130 6,880 1,276 6,450 884 - - 6,450 1,30
L80 HCE 4,130 7,050 7,020 7,800 6,880 1,395 6,870 947 - - 7,050 1,35
C90 4,160 7,250 7,220 8,020 8,000 1,435 6,870 979 - - 7,250 1,40
R95 4,300 7,660 7,620 8,460 7,660 1,515 6,870 1,032 - - 7,440 1,48
T95 4,300 7,660 7,620 8,460 8,450 1,515 6,870 1,032 - - 7,440 1,48
T95 HC 5,670 7,660 7,620 8,460 8,450 1,515 6,870 1,032 - - 7,440 1,48
T95 E 4,300 8,060 8,030 8,910 8,450 1,595 6,870 1,074 - - 7,440 1,5
T95 HCE 5,670 8,060 8,030 8,910 8,450 1,595 6,870 1,074 - - 7,440 1,5
P110 4,610 8,860 8,830 9,800 10,120 1,754 7,890 1,202 - - 7,440 1,74
P110 MS 4,610 8,860 8,830 9,800 10,120 1,754 7,890 1,202 - - 7,440 1,74
P110 EC 6,130 10,070 10,030 11,140 11,000 1,993 7,890 1,350 - - 7,440 1,92
P110 HCE 6,310 10,070 10,030 11,140 11,000 1,993 7,890 1,350 - - 7,440 1,9
C110 4,610 8,860 8,830 9,800 9,310 1,754 7,890 1,180 - - 7,440 1,66
Q125 4,850 10,070 10,030 11,140 11,000 1,993 7,890 1,350 - - 7,440 1,92
Q125 HC 6,440 10,070 10,030 11,140 11,000 1,993 7,890 1,350 - - 7,440 1,92
Q125 HCE 6,440 10,880 10,830 12,030 11,480 2,153 7,890 1,445 - - 7,440 2,0
N80 5,160 7,100 7,060 7,810 6,630 1,398 6,870 996 - - 7,100 1,47
L80 5,160 7,100 7,060 7,810 7,610 1,398 6,870 983 - - 7,100 1,42
L80 1Cr 5,160 7,100 7,060 7,810 7,610 1,398 6,870 983 - - 7,100 1,42
L80 HC 5,390 7,100 7,060 7,810 7,610 1,398 6,870 983 - - 7,100 1,42
L80 IRP 5,160 7,100 7,060 7,810 7,610 1,398 6,870 983 - - 7,100 1,42
L80 HCE 5,390 7,760 7,720 8,550 7,610 1,529 6,870 1,053 - - 7,440 1,48
C90 5,460 7,980 7,950 8,790 8,840 1,573 6,870 1,089 - - 7,440 1,54
R95 5,580 8,430 8,390 9,280 8,460 1,660 6,870 1,148 - - 7,440 1,62
T95 5,580 8,430 8,390 9,280 9,340 1,660 6,870 1,148 - - 7,440 1,62
T95 HC 7,110 8,430 8,390 9,280 9,340 1,660 6,870 1,148 - - 7,440 1,62
T95 E 5,580 8,870 8,830 9,770 9,340 1,747 6,870 1,195 - - 7,440 1,66 T95 HCE 7,110 8,870 8,830 9,770 9,340 1,747 6,870 1,195 - - 7,440 1,66
P110 5,880 9,760 9,710 10,740 11,190 1,922 7,890 1,337 - - 7,440 1,9
P110 MS 5,880 9,760 9,710 10,740 11,190 1,922 7,890 1,337 - - 7,440 1,9
P110 EC 7,780 11,090 11,030 12,210 12,160 2,184 7,890 1,502 - - 7,440 2,10
P110 HCE 8,010 11,090 11,030 12,210 12,160 2,184 7,890 1,502 - - 7,440 2,1
C110 5,880 9,760 9,710 10,740 10,300 1,922 7,890 1,312 - - 7,440 1,82
Q125 6,070 11,090 11,030 12,210 12,160 2,184 7,890 1,502 - - 7,440 2,10
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 93/124
Casing Dimensions andMinimum Performance Properties
Vallourec USA Corporation / Performance Data 7 5/8” -10 3/4” / pg.
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
10 3/4 60.70 59.45 0.545 17.473 9.504 N/A
10 3/4 65.70 64.59 0.595 18.982 9.404 9.500
10 3/4 68.80 68.76 0.636 20.208 9.322 N/A
Q125 HC 8,010 11,090 11,030 12,210 12,160 2,184 7,890 1,502 - - 7,440 2,10
Q125 HCE 8,010 11,980 11,920 13,190 12,690 2,359 7,890 1,608 - - 7,440 2,2
N80 6,310 7,750 7,700 8,490 7,260 1,519 6,870 1,096 - - 7,440 1,60
L80 6,310 7,750 7,700 8,490 8,340 1,519 6,870 1,082 - - 7,440 1,55
L80 1Cr 6,310 7,750 7,700 8,490 8,340 1,519 6,870 1,082 - - 7,440 1,55
L80 HC 6,650 7,750 7,700 8,490 8,340 1,519 6,870 1,082 - - 7,440 1,55
L80 IRP 6,310 7,750 7,700 8,490 8,340 1,519 6,870 1,082 - - 7,440 1,55
L80 HCE 6,650 8,480 8,430 9,290 8,340 1,661 6,870 1,159 - - 7,440 1,60
C90 6,760 8,720 8,670 9,560 9,690 1,708 6,870 1,198 - - 7,440 1,67
R95 6,960 9,200 9,150 10,090 9,270 1,803 6,870 1,263 - - 7,440 1,76
T95 6,960 9,200 9,150 10,090 10,240 1,803 6,870 1,263 - - 7,440 1,76
T95 HC 8,490 9,200 9,150 10,090 10,240 1,803 6,870 1,263 - - 7,440 1,76
T95 E 6,960 9,690 9,630 10,620 10,240 1,898 6,870 1,314 - - 7,440 1,80
T95 HCE 8,490 9,690 9,630 10,620 10,240 1,898 6,870 1,314 - - 7,440 1,80
P110 7,510 10,650 10,590 11,680 12,270 2,088 7,890 1,471 - - 7,440 2,07
P110 MS 7,510 10,650 10,590 11,680 12,270 2,088 7,890 1,471 - - 7,440 2,07
P110 EC 8,900 12,110 12,040 13,270 13,330 2,373 7,890 1,652 - - 7,440 2,29
P110 HCE 9,170 12,110 12,040 13,270 13,330 2,373 7,890 1,652 - - 7,440 2,2
C110 7,510 10,650 10,590 11,680 11,290 2,088 7,890 1,444 - - 7,440 1,97
Q125 7,920 12,110 12,040 13,270 13,330 2,373 7,890 1,652 - - 7,440 2,29
Q125 HC 9,170 12,110 12,040 13,270 13,330 2,373 7,890 1,652 - - 7,440 2,29
Q125 HCE 9,170 13,080 13,000 14,330 13,910 2,563 7,890 1,768 - - 7,440 2,4
N80 7,240 8,280 8,230 9,050 7,780 1,617 - - - - - -
L80 7,240 8,280 8,230 9,050 8,940 1,617 - - - - - -
L80 1Cr 7,240 8,280 8,230 9,050 8,940 1,617 - - - - - -
L80 HC 7,680 8,280 8,230 9,050 8,940 1,617 - - - - - -
L80 IRP 7,240 8,280 8,230 9,050 8,940 1,617 - - - - - -
L80 HCE 7,680 9,060 9,000 9,900 8,940 1,768 - - - - - -
C90 7,820 9,320 9,250 10,180 10,400 1,819 - - - - - - R95 8,100 9,840 9,770 10,740 9,940 1,920 - - - - - -
T95 8,100 9,840 9,770 10,740 10,980 1,920 - - - - - -
T95 HC 9,870 9,840 9,770 10,740 10,980 1,920 - - - - - -
T95 E 8,100 10,350 10,280 11,310 10,980 2,021 - - - - - -
T95 HCE 9,870 10,350 10,280 11,310 10,980 2,021 - - - - - -
P110 8,840 11,390 11,310 12,440 13,160 2,223 - - - - - -
P110 MS 8,840 11,390 11,310 12,440 13,160 2,223 - - - - - -
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 94/124
Casing Dimensions andMinimum Performance Properties
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
10 3/4 68.80 68.76 0.636 20.208 9.322 N/A
10 3/4 73.20 72.40 0.672 21.276 9.250 N/A
10 3/4 79.20 78.59 0.734 23.096 9.126 N/A
pg. 78 / Vallourec USA Corporation / Performance Data 7 5/8” -10 3/4”
P110 EC 9,470 12,940 12,850 14,140 14,300 2,526 - - - - - -
P110 HCE 9,810 12,940 12,850 14,140 14,300 2,526 - - - - - -
C110 8,840 11,390 11,310 12,440 12,100 2,223 - - - - - -
Q125 9,470 12,940 12,850 14,140 14,300 2,526 - - - - - -
Q125 HC 9,810 12,940 12,850 14,140 14,300 2,526 - - - - - -
Q125 HCE 9,810 13,980 13,880 15,270 14,920 2,728 - - - - - -
N80 8,070 8,750 8,690 9,530 8,240 1,702 - - - - - -
L80 8,070 8,750 8,690 9,530 9,470 1,702 - - - - - -
L80 1Cr 8,070 8,750 8,690 9,530 9,470 1,702 - - - - - -
L80 HC 8,590 8,750 8,690 9,530 9,470 1,702 - - - - - -
L80 IRP 8,070 8,750 8,690 9,530 9,470 1,702 - - - - - -
L80 HCE 8,590 9,570 9,500 10,420 9,470 1,862 - - - - - -
C90 8,760 9,850 9,770 10,720 11,020 1,915 - - - - - -
R95 9,090 10,390 10,310 11,320 10,530 2,021 - - - - - -
T95 9,090 10,390 10,310 11,320 11,640 2,021 - - - - - -
T95 HC 10,380 10,390 10,310 11,320 11,640 2,021 - - - - - -
T95 E 9,090 10,940 10,860 11,910 11,640 2,128 - - - - - -
T95 HCE 10,380 10,940 10,860 11,910 11,640 2,128 - - - - - -
P110 10,010 12,030 11,940 13,100 13,940 2,340 - - - - - -
P110 MS 10,010 12,030 11,940 13,100 13,940 2,340 - - - - - -
P110 EC 10,820 13,670 13,570 14,890 15,150 2,660 - - - - - -
P110 HCE 11,290 13,670 13,570 14,890 15,150 2,660 - - - - - -
C110 10,010 12,030 11,940 13,100 12,830 2,340 - - - - - -
Q125 10,820 13,670 13,570 14,890 15,150 2,660 - - - - - -
Q125 HC 11,290 13,670 13,570 14,890 15,150 2,660 - - - - - -
Q125 HCE 11,290 14,770 14,660 16,080 15,810 2,872 - - - - - -
N80 9,480 9,560 9,470 10,350 9,030 1,848 - - - - - -
L80 9,480 9,560 9,470 10,350 10,390 1,848 - - - - - -
L80 1Cr 9,480 9,560 9,470 10,350 10,390 1,848 - - - - - - L80 HC 10,290 9,560 9,470 10,350 10,390 1,848 - - - - - -
L80 IRP 9,480 9,560 9,470 10,350 10,390 1,848 - - - - - -
L80 HCE 10,290 10,460 10,360 11,330 10,390 2,021 - - - - - -
C90 10,370 10,750 10,660 11,650 12,090 2,079 - - - - - -
R95 10,800 11,350 11,250 12,300 11,550 2,194 - - - - - -
T95 10,800 11,350 11,250 12,300 12,780 2,194 - - - - - -
T95 HC 11,750 11,350 11,250 12,300 12,780 2,194 - - - - - -
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 95/124
Casing Dimensions andMinimum Performance Properties
Vallourec USA Corporation / Performance Data 7 5/8” -10 3/4” / pg.
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative driftIP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
10 3/4 79.20 78.59 0.734 23.096 9.126 N/A
10 3/4 85.30 84.80 0.797 24.921 9.000 N/A
T95 E 10,800 11,950 11,840 12,940 12,780 2,310 - - - - - -
T95 HCE 11,750 11,950 11,840 12,940 12,780 2,310 - - - - - -
P110 12,030 13,140 13,020 14,240 15,300 2,541 - - - - - -
P110 MS 12,030 13,140 13,020 14,240 15,300 2,541 - - - - - -
P110 EC 13,160 14,940 14,800 16,180 16,630 2,887 - - - - - -
P110 HCE 13,840 14,940 14,800 16,180 16,630 2,887 - - - - - -
C110 12,030 13,140 13,020 14,240 14,080 2,541 - - - - - -
Q125 13,160 14,940 14,800 16,180 16,630 2,887 - - - - - -
Q125 HC 13,840 14,940 14,800 16,180 16,630 2,887 - - - - - -
Q125 HCE 13,840 16,130 15,990 17,470 17,350 3,118 - - - - - -
N80 10,920 10,380 10,270 11,180 9,840 1,994 - - - - - -
L80 10,920 10,380 10,270 11,180 11,330 1,994 - - - - - -
L80 1Cr 10,920 10,380 10,270 11,180 11,330 1,994 - - - - - -
L80 HC 11,740 10,380 10,270 11,180 11,330 1,994 - - - - - -
L80 IRP 10,920 10,380 10,270 11,180 11,330 1,994 - - - - - -
L80 HCE 11,740 11,350 11,230 12,230 11,330 2,181 - - - - - -
C90 12,010 11,680 11,550 12,580 13,200 2,243 - - - - - -
R95 12,540 12,330 12,190 13,280 12,600 2,367 - - - - - -
T95 12,540 12,330 12,190 13,280 13,950 2,367 - - - - - -
T95 HC 13,070 12,330 12,190 13,280 13,950 2,367 - - - - - -
T95 E 12,540 12,970 12,840 13,980 13,950 2,492 - - - - - -
T95 HCE 13,070 12,970 12,840 13,980 13,950 2,492 - - - - - -
P110 14,080 14,270 14,120 15,380 16,700 2,741 - - - - - -
P110 MS 14,080 14,270 14,120 15,380 16,700 2,741 - - - - - -
P110 EC 15,530 16,220 16,050 17,470 18,150 3,115 - - - - - -
P110 HCE 15,870 16,220 16,050 17,470 18,150 3,115 - - - - - -
C110 14,080 14,270 14,120 15,380 15,370 2,741 - - - - - -
Q125 15,530 16,220 16,050 17,470 18,150 3,115 - - - - - -
Q125 HC 16,440 16,220 16,050 17,470 18,150 3,115 - - - - - - Q125 HCE 16,440 17,520 17,330 18,870 18,940 3,364 - - - - - -
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 96/124
Casing Dimensions andMinimum Performance Properties
pg. 80 / Vallourec USA Corporation / Performance Data 7 5/8” -10 3/4”
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 97/124
Performance Data11 3/4" - 26"
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 98/124
Performance Data11 3/4" - 26"
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 99/124
Casing Dimensions andMinimum Performance Properties
Vallourec USA Corporation / Performance Data 11 3/4” - 26” / pg.
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
11 3/4 47.00 45.60 0.375 13.401 10.844 N/A
11 3/4 54.00 52.62 0.435 15.463 10.724 N/A
11 3/4 60.00 58.87 0.489 17.300 10.616 10.625
11 3/4 65.00 64.03 0.534 18.816 10.526 10.625
J55 1,510 3,070 3,070 3,440 3,050 737 3,070 477 - - 3,070 80
K55 1,510 3,070 3,070 3,440 3,870 737 3,070 509 - - 3,070 93
J55 2,070 3,560 3,550 3,970 3,560 850 3,560 568 - - 3,560 93
K55 2,070 3,560 3,550 3,970 4,500 850 3,560 606 - - 3,560 1,07
J55 2,660 4,010 3,990 4,450 4,010 951 4,010 649 - - 4,010 1,04
K55 2,660 4,010 3,990 4,450 5,080 951 4,010 693 - - 4,010 1,20
N80 3,180 5,830 5,810 6,470 5,410 1,384 5,810 924 - - 5,830 1,44
L80 3,180 5,830 5,810 6,470 6,200 1,384 5,810 913 - - 5,830 1,39
L80 1Cr 3,180 5,830 5,810 6,470 6,200 1,384 5,810 913 - - 5,830 1,39
L80 HC 4,400 5,830 5,810 6,470 6,200 1,384 5,810 913 - - 5,830 1,39
L80 IRP 3,180 5,830 5,810 6,470 6,200 1,384 5,810 913 - - 5,830 1,39
L80 HCE 4,400 6,370 6,350 7,070 6,200 1,514 5,810 978 - - 6,300 1,45
C90 3,360 6,550 6,530 7,280 7,200 1,557 5,810 1,011 - - 6,300 1,5
R95 3,440 6,920 6,900 7,680 6,900 1,643 5,810 1,066 - - 6,300 1,59
T95 3,440 6,920 6,900 7,680 7,610 1,643 5,810 1,066 - - 6,300 1,59
T95 HC 4,350 6,920 6,900 7,680 7,610 1,643 5,810 1,066 - - 6,300 1,59
T95 E 3,500 7,280 7,260 8,080 7,610 1,730 5,810 1,110 - - 6,300 1,63
T95 HCE 4,350 7,280 7,260 8,080 7,610 1,730 5,810 1,110 - - 6,300 1,63
P110 3,610 8,010 7,980 8,890 9,120 1,903 6,670 1,242 - - 6,300 1,87
P110 MS 3,610 8,010 7,980 8,890 9,120 1,903 6,670 1,242 - - 6,300 1,87
P110 HCE 4,490 9,100 9,070 10,100 9,910 2,162 6,670 1,395 - - 6,300 2,07
Q125 3,680 9,100 9,070 10,100 9,910 2,162 6,670 1,395 - - 6,300 2,07
Q125 HC 4,520 9,100 9,070 10,100 9,910 2,162 6,670 1,395 - - 6,300 2,07
Q125 HCE 4,520 9,830 9,800 10,910 10,340 2,335 6,670 1,494 - - 6,300 2,19
J55 3,290 4,370 4,360 4,840 4,390 1,035 - - - - - -
K55 3,290 4,370 4,360 4,840 5,560 1,035 - - - - - -
N80 3,870 6,360 6,340 7,040 5,920 1,505 - - - - - -
L80 3,870 6,360 6,340 7,040 6,790 1,505 - - - - - -
L80 1Cr 3,870 6,360 6,340 7,040 6,790 1,505 - - - - - - L80 HC 5,400 6,360 6,340 7,040 6,790 1,505 - - - - - -
L80 IRP 3,870 6,360 6,340 7,040 6,790 1,505 - - - - - -
L80 HCE 5,400 6,960 6,930 7,700 6,790 1,646 - - - - - -
C90 4,060 7,160 7,130 7,920 7,890 1,693 - - - - - -
R95 4,180 7,560 7,530 8,360 7,550 1,788 - - - - - -
T95 4,180 7,560 7,530 8,360 8,340 1,788 - - - - - -
T95 HC 5,490 7,560 7,530 8,360 8,340 1,788 - - - - - -
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 100/124
Casing Dimensions andMinimum Performance Properties
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
11 3/4 65.00 64.03 0.534 18.816 10.526 10.625
11 3/4 71.00 69.48 0.582 20.420 10.430 N/A
11 3/4 75.00 73.54 0.618 21.613 10.358 N/A
pg. 82 / Vallourec USA Corporation / Performance Data 11 3/4” - 26”
T95 E 4,280 7,950 7,920 8,800 8,340 1,882 - - - - - -
T95 HCE 5,490 7,950 7,920 8,800 8,340 1,882 - - - - - -
P110 4,480 8,750 8,710 9,680 9,990 2,070 - - - - - -
P110 MS 4,480 8,750 8,710 9,680 9,990 2,070 - - - - - -
P110 HCE 5,770 9,940 9,900 11,000 10,850 2,352 - - - - - -
Q125 4,690 9,940 9,900 11,000 10,850 2,352 - - - - - -
Q125 HC 5,810 9,940 9,900 11,000 10,850 2,352 - - - - - -
Q125 HCE 5,810 10,740 10,690 11,880 11,320 2,540 - - - - - -
J55 3,970 4,770 4,740 5,250 4,790 1,123 - - - - - -
K55 3,970 4,770 4,740 5,250 6,070 1,123 - - - - - -
N80 4,880 6,930 6,900 7,640 6,470 1,634 - - - - - -
L80 4,880 6,930 6,900 7,640 7,430 1,634 - - - - - -
L80 1Cr 4,880 6,930 6,900 7,640 7,430 1,634 - - - - - -
L80 HC 6,290 6,930 6,900 7,640 7,430 1,634 - - - - - -
L80 IRP 4,880 6,930 6,900 7,640 7,430 1,634 - - - - - -
L80 HCE 6,290 7,580 7,550 8,360 7,430 1,787 - - - - - -
C90 5,130 7,800 7,760 8,600 8,630 1,838 - - - - - -
R95 5,240 8,230 8,200 9,070 8,260 1,940 - - - - - -
T95 5,240 8,230 8,200 9,070 9,120 1,940 - - - - - -
T95 HC 6,760 8,230 8,200 9,070 9,120 1,940 - - - - - -
T95 E 5,330 8,670 8,630 9,550 9,120 2,042 - - - - - -
T95 HCE 6,760 8,670 8,630 9,550 9,120 2,042 - - - - - -
P110 5,470 9,530 9,490 10,510 10,920 2,246 - - - - - -
P110 HCE 7,250 10,840 10,780 11,940 11,870 2,552 - - - - - -
C110 5,470 9,530 9,490 10,510 10,050 2,246 - - - - - -
Q125 5,760 10,840 10,780 11,940 11,870 2,552 - - - - - -
Q125 HC 7,370 10,840 10,780 11,940 11,870 2,552 - - - - - -
Q125 HCE 7,370 11,700 11,650 12,900 12,390 2,757 - - - - - -
J55 4,470 5,060 5,040 5,560 5,100 1,189 - - - - - - K55 4,470 5,060 5,040 5,560 6,460 1,189 - - - - - -
N80 5,630 7,360 7,320 8,090 6,890 1,729 - - - - - -
L80 5,630 7,360 7,320 8,090 7,900 1,729 - - - - - -
L80 1Cr 5,630 7,360 7,320 8,090 7,900 1,729 - - - - - -
L80 HC 7,040 7,360 7,320 8,090 7,900 1,729 - - - - - -
L80 IRP 5,630 7,360 7,320 8,090 7,900 1,729 - - - - - -
L80 HCE 7,040 8,050 8,010 8,850 7,900 1,891 - - - - - -
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 101/124
Casing Dimensions andMinimum Performance Properties
Vallourec USA Corporation / Performance Data 11 3/4” - 26” / pg.
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
11 3/4 75.00 73.54 0.618 21.613 10.358 N/A
11 3/4 79.00 77.80 0.656 22.863 10.282 N/A
11 7/8 71.80 70.26 0.582 20.648 10.555 10.625
C90 5,990 8,280 8,240 9,100 9,190 1,945 - - - - - -
R95 6,150 8,740 8,700 9,610 8,790 2,053 - - - - - -
T95 6,150 8,740 8,700 9,610 9,710 2,053 - - - - - -
T95 HC 7,690 8,740 8,700 9,610 9,710 2,053 - - - - - -
T95 E 6,300 9,200 9,150 10,120 9,710 2,161 - - - - - -
T95 HCE 7,690 9,200 9,150 10,120 9,710 2,161 - - - - - -
P110 6,540 10,120 10,070 11,130 11,630 2,377 - - - - - -
P110 HCE 8,430 11,510 11,440 12,640 12,640 2,702 - - - - - -
C110 6,540 10,120 10,070 11,130 10,700 2,377 - - - - - -
Q125 6,810 11,510 11,440 12,640 12,640 2,702 - - - - - -
Q125 HC 8,630 11,510 11,440 12,640 12,640 2,702 - - - - - -
Q125 HCE 8,630 12,430 12,360 13,660 13,190 2,918 - - - - - -
J55 5,000 5,370 5,340 5,890 5,430 1,257 - - - - - -
K55 5,000 5,370 5,340 5,890 6,870 1,257 - - - - - -
N80 6,430 7,820 7,770 8,560 7,330 1,829 - - - - - -
L80 6,430 7,820 7,770 8,560 8,410 1,829 - - - - - -
L80 1Cr 6,430 7,820 7,770 8,560 8,410 1,829 - - - - - -
L80 HC 7,780 7,820 7,770 8,560 8,410 1,829 - - - - - -
L80 IRP 6,430 7,820 7,770 8,560 8,410 1,829 - - - - - -
L80 HCE 7,780 8,550 8,500 9,370 8,410 2,001 - - - - - -
C90 6,890 8,790 8,740 9,630 9,780 2,058 - - - - - -
R95 7,110 9,280 9,230 10,170 9,350 2,172 - - - - - -
T95 7,110 9,280 9,230 10,170 10,330 2,172 - - - - - -
T95 HC 8,620 9,280 9,230 10,170 10,330 2,172 - - - - - -
T95 E 7,310 9,770 9,710 10,710 10,330 2,286 - - - - - -
T95 HCE 8,620 9,770 9,710 10,710 10,330 2,286 - - - - - -
P110 7,670 10,750 10,680 11,780 12,380 2,515 - - - - - -
P110 HCE 9,690 12,210 12,140 13,380 13,450 2,858 - - - - - -
C110 7,670 10,750 10,680 11,780 11,390 2,515 - - - - - - Q125 8,120 12,210 12,140 13,380 13,450 2,858 - - - - - -
Q125 HC 9,990 12,210 12,140 13,380 13,450 2,858 - - - - - -
Q125 HCE 9,990 13,190 13,110 14,450 14,040 3,087 - - - - - -
J55 3,880 4,720 4,700 5,200 4,740 1,136 - - - - - -
K55 3,880 4,720 4,700 5,200 6,010 1,136 - - - - - -
N80 4,750 6,860 6,830 7,570 6,400 1,652 - - - - - -
L80 4,750 6,860 6,830 7,570 7,340 1,652 - - - - - -
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 102/124
Casing Dimensions andMinimum Performance Properties
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
11 7/8 71.80 70.26 0.582 20.648 10.555 10.625
13 3/8 54.50 52.79 0.380 15.513 12.459 N/A
13 3/8 61.00 59.50 0.430 17.487 12.359 N/A
13 3/8 68.00 66.17 0.480 19.445 12.259 N/A
pg. 84 Vallourec USA Corporation / Performance Data 11 3/4” - 26”
L80 1Cr 4,750 6,860 6,830 7,570 7,340 1,652 - - - - - -
L80 HC 6,160 6,860 6,830 7,570 7,340 1,652 - - - - - -
L80 IRP 4,750 6,860 6,830 7,570 7,340 1,652 - - - - - -
L80 HCE 6,160 7,500 7,470 8,270 7,340 1,807 - - - - - -
C90 4,980 7,720 7,680 8,510 8,540 1,858 - - - - - -
R95 5,080 8,150 8,110 8,980 8,170 1,962 - - - - - -
T95 5,080 8,150 8,110 8,980 9,020 1,962 - - - - - -
T95 HC 6,590 8,150 8,110 8,980 9,020 1,962 - - - - - -
T95 E 5,170 8,580 8,540 9,460 9,020 2,065 - - - - - -
T95 HCE 6,590 8,580 8,540 9,460 9,020 2,065 - - - - - -
P110 5,290 9,430 9,390 10,400 10,800 2,271 - - - - - -
P110 HCE 7,190 10,720 10,670 11,820 11,740 2,581 - - - - - -
C110 5,290 9,430 9,390 10,400 9,940 2,271 - - - - - -
Q125 5,630 10,720 10,670 11,820 11,740 2,581 - - - - - -
Q125 HC 7,400 10,720 10,670 11,820 11,740 2,581 - - - - - -
Q125 HCE 7,400 11,580 11,520 12,770 12,250 2,788 - - - - - -
J55 1,130 2,730 2,730 3,070 2,710 853 2,730 514 - - 2,730 90
K55 1,130 2,730 2,730 3,070 3,440 853 2,730 547 - - 2,730 1,03
J55 1,540 3,090 3,090 3,460 3,080 962 3,090 595 - - 3,090 1,02
K55 1,540 3,090 3,090 3,460 3,900 962 3,090 633 - - 3,090 1,17
J55 1,950 3,450 3,450 3,850 3,440 1,069 3,450 675 - - 3,450 1,14
K55 1,950 3,450 3,450 3,850 4,360 1,069 3,450 718 - - 3,450 1,30
N80 2,260 5,020 5,010 5,610 4,650 1,556 4,550 963 - - 4,930 1,58
L80 2,260 5,020 5,010 5,610 5,320 1,556 4,550 952 - - 4,930 1,54
L80 1Cr 2,260 5,020 5,010 5,610 5,320 1,556 4,550 952 - - 4,930 1,54
L80 HC 2,820 5,020 5,010 5,610 5,320 1,556 4,550 952 - - 4,930 1,54
L80 IRP 2,260 5,020 5,010 5,610 5,320 1,556 4,550 952 - - 4,930 1,54
L80 HCE 2,820 5,500 5,480 6,130 5,320 1,701 4,550 1,023 - - 4,930 1,6
C90 2,320 5,650 5,640 6,310 6,180 1,750 4,550 1,057 - - 4,930 1,68 R95 2,340 5,970 5,950 6,660 5,920 1,847 4,550 1,114 - - 4,930 1,77
T95 2,340 5,970 5,950 6,660 6,530 1,847 4,550 1,114 - - 4,930 1,77
T95 HC 2,870 5,970 5,950 6,660 6,530 1,847 4,550 1,114 - - 4,930 1,77
T95 E 2,330 6,280 6,260 7,010 6,530 1,945 4,550 1,161 - - 4,930 1,82
T95 HCE 2,870 6,280 6,260 7,010 6,530 1,945 4,550 1,161 - - 4,930 1,82
P110 2,330 6,910 6,890 7,710 7,820 2,139 5,220 1,297 - - 4,930 2,07
P110 HCE 2,910 7,850 7,830 8,760 8,500 2,431 5,220 1,458 - - 4,930 2,30
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 103/124
Casing Dimensions andMinimum Performance Properties
Vallourec USA Corporation / Performance Data 11 3/4” - 26” / pg.
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
13 3/8 68.00 66.17 0.480 19.445 12.259 N/A
13 3/8 72.00 70.67 0.514 20.768 12.191 12.250
13 3/8 77.00 75.40 0.550 22.160 12.119 N/A
Q125 2,330 7,850 7,830 8,760 8,500 2,431 5,220 1,458 - - 4,930 2,30
Q125 HC 2,930 7,850 7,830 8,760 8,500 2,431 5,220 1,458 - - 4,930 2,30
Q125 HCE 2,930 8,480 8,460 9,460 8,870 2,625 5,220 1,563 - - 4,930 2,44
N80 2,670 5,380 5,360 5,990 4,990 1,661 4,550 1,040 - - 4,930 1,69
L80 2,670 5,380 5,360 5,990 5,710 1,661 4,550 1,029 - - 4,930 1,65
L80 1Cr 2,670 5,380 5,360 5,990 5,710 1,661 4,550 1,029 - - 4,930 1,65
L80 HC 3,410 5,380 5,360 5,990 5,710 1,661 4,550 1,029 - - 4,930 1,65
L80 IRP 2,670 5,380 5,360 5,990 5,710 1,661 4,550 1,029 - - 4,930 1,65
L80 HCE 3,410 5,880 5,870 6,550 5,710 1,817 4,550 1,105 - - 4,930 1,72
C90 2,780 6,050 6,040 6,740 6,630 1,869 4,550 1,142 - - 4,930 1,79
R95 2,830 6,390 6,370 7,110 6,350 1,973 4,550 1,204 - - 4,930 1,89
T95 2,830 6,390 6,370 7,110 7,010 1,973 4,550 1,204 - - 4,930 1,89
T95 HC 3,490 6,390 6,370 7,110 7,010 1,973 4,550 1,204 - - 4,930 1,89
T95 E 2,850 6,730 6,710 7,490 7,010 2,077 4,550 1,254 - - 4,930 1,94
T95 HCE 3,490 6,730 6,710 7,490 7,010 2,077 4,550 1,254 - - 4,930 1,94
P110 2,880 7,400 7,380 8,240 8,390 2,284 5,220 1,401 - - 4,930 2,22
P110 HCE 3,560 8,410 8,380 9,360 9,120 2,596 5,220 1,576 - - 4,930 2,46
Q125 2,880 8,410 8,380 9,360 9,120 2,596 5,220 1,576 - - 4,930 2,46
Q125 HC 3,580 8,410 8,380 9,360 9,120 2,596 5,220 1,576 - - 4,930 2,46
Q125 HCE 3,580 9,080 9,050 10,110 9,520 2,804 5,220 1,688 - - 4,930 2,6
N80 3,100 5,760 5,740 6,390 5,340 1,773 - - - - - -
L80 3,100 5,760 5,740 6,390 6,120 1,773 - - - - - -
L80 1Cr 3,100 5,760 5,740 6,390 6,120 1,773 - - - - - -
L80 HC 4,090 5,760 5,740 6,390 6,120 1,773 - - - - - -
L80 IRP 3,100 5,760 5,740 6,390 6,120 1,773 - - - - - -
L80 HCE 4,090 6,300 6,280 6,990 6,120 1,939 - - - - - -
C90 3,270 6,480 6,460 7,190 7,110 1,994 - - - - - -
R95 3,350 6,840 6,810 7,590 6,810 2,105 - - - - - -
T95 3,350 6,840 6,810 7,590 7,520 2,105 - - - - - - T95 HC 4,210 6,840 6,810 7,590 7,520 2,105 - - - - - -
T95 E 3,400 7,200 7,170 7,990 7,520 2,216 - - - - - -
T95 HCE 4,210 7,200 7,170 7,990 7,520 2,216 - - - - - -
P110 3,490 7,920 7,890 8,790 9,000 2,438 - - - - - -
P110 HCE 4,330 9,000 8,970 9,990 9,780 2,770 - - - - - -
Q125 3,550 9,000 8,970 9,990 9,780 2,770 - - - - - -
Q125 HC 4,370 9,000 8,970 9,990 9,780 2,770 - - - - - -
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 104/124
Casing Dimensions andMinimum Performance Properties
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
13 3/8 77.00 75.40 0.550 22.160 12.119 N/A
13 5/8 88.20 86.86 0.625 25.525 12.219 12.250
14 82.50 80.73 0.562 23.726 12.689 N/A
14 94.80 93.58 0.656 27.500 12.501 N/A
14 99.30 97.91 0.688 28.773 12.437 N/A
pg. 86 Vallourec USA Corporation / Performance Data 11 3/4” - 26”
Q125 HCE 4,370 9,710 9,680 10,790 10,210 2,992 - - - - - -
N80 3,980 6,420 6,400 7,100 5,980 2,042 - - - - - -
L80 3,980 6,420 6,400 7,100 6,860 2,042 - - - - - -
L80 1Cr 3,980 6,420 6,400 7,100 6,860 2,042 - - - - - -
L80 HC 5,340 6,420 6,400 7,100 6,860 2,042 - - - - - -
L80 IRP 3,980 6,420 6,400 7,100 6,860 2,042 - - - - - -
L80 HCE 5,340 7,020 7,000 7,770 6,860 2,233 - - - - - -
C90 4,130 7,220 7,200 7,990 7,970 2,297 - - - - - -
R95 4,260 7,630 7,600 8,430 7,630 2,425 - - - - - -
T95 4,260 7,630 7,600 8,430 8,420 2,425 - - - - - -
T95 HC 5,620 7,630 7,600 8,430 8,420 2,425 - - - - - -
T95 E 4,370 8,030 7,990 8,880 8,420 2,553 - - - - - -
T95 HCE 5,620 8,030 7,990 8,880 8,420 2,553 - - - - - -
P110 4,570 8,830 8,790 9,760 10,080 2,808 - - - - - -
P110 HCE 5,950 10,030 9,990 11,100 10,960 3,191 - - - - - -
C110 4,570 8,830 8,790 9,760 9,280 2,808 - - - - - -
Q125 4,800 10,030 9,990 11,100 10,960 3,191 - - - - - -
Q125 HC 5,970 10,030 9,990 11,100 10,960 3,191 - - - - - -
Q125 HCE 5,970 10,840 10,790 11,980 11,430 3,446 - - - - - -
K55 2,420 3,860 3,850 4,290 4,890 1,305 - - - - - -
N80 2,940 5,620 5,600 6,250 5,210 1,898 - - - - - -
L80 2,940 5,620 5,600 6,250 5,970 1,898 - - - - - -
L80 HC 3,840 5,620 5,600 6,250 5,970 1,898 - - - - - -
R95 3,160 6,670 6,650 7,420 6,640 2,254 - - - - - -
K55 3,530 4,510 4,490 4,980 5,740 1,513 - - - - - -
N80 4,220 6,560 6,530 7,250 6,110 2,200 - - - - - -
L80 4,220 6,560 6,530 7,250 7,010 2,200 - - - - - -
L80 HC 5,600 6,560 6,530 7,250 7,010 2,200 - - - - - -
R95 4,450 7,790 7,760 8,610 7,800 2,613 - - - - - - P110 4,800 9,020 8,980 9,960 10,310 3,025 - - - - - -
P110 HC 4,800 9,020 8,980 9,960 10,310 3,025 - - - - - -
C110 4,800 9,020 8,980 9,960 9,490 3,025 - - - - - -
Q125 5,060 10,250 10,210 11,320 11,200 3,438 - - - - - -
Q125 HC 6,330 10,250 10,210 11,320 11,200 3,438 - - - - - -
K55 3,900 4,730 4,710 5,210 6,020 1,583 - - - - - -
N80 4,780 6,880 6,850 7,580 6,420 2,302 - - - - - -
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 105/124
Casing Dimensions andMinimum Performance Properties
Vallourec USA Corporation / Performance Data 11 3/4” - 26” / pg.
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
14 99.30 97.91 0.688 28.773 12.437 N/A
14 103.50 102.21 0.720 30.039 12.373 N/A
14 110.00 109.17 0.772 32.082 12.269 N/A
14 114.00 112.89 0.800 33.175 12.213 12.250
14 115.00 114.48 0.812 33.642 12.189 12.250
L80 4,780 6,880 6,850 7,580 7,370 2,302 - - - - - -
L80 HC 6,200 6,880 6,850 7,580 7,370 2,302 - - - - - -
R95 5,120 8,170 8,130 9,010 8,190 2,733 - - - - - -
P110 5,330 9,460 9,420 10,430 10,830 3,165 - - - - - -
P110 HC 7,100 9,460 9,420 10,430 10,830 3,165 - - - - - -
C110 5,330 9,460 9,420 10,430 9,970 3,165 - - - - - -
Q125 5,660 10,750 10,700 11,850 11,770 3,597 - - - - - -
Q125 HC 7,220 10,750 10,700 11,850 11,770 3,597 - - - - - -
N80 5,340 7,200 7,160 7,920 6,730 2,403 - - - - - -
L80 5,340 7,200 7,160 7,920 7,720 2,403 - - - - - -
L80 HC 6,760 7,200 7,160 7,920 7,720 2,403 - - - - - -
R95 5,800 8,550 8,510 9,410 8,590 2,854 - - - - - -
P110 6,130 9,900 9,850 10,890 11,360 3,304 - - - - - -
P110 HC 7,980 9,900 9,850 10,890 11,360 3,304 - - - - - -
C110 6,130 9,900 9,850 10,890 10,450 3,304 - - - - - -
Q125 6,330 11,250 11,190 12,380 12,340 3,755 - - - - - -
Q125 HC 8,140 11,250 11,190 12,380 12,340 3,755 - - - - - -
N80 6,260 7,720 7,670 8,460 7,230 2,567 - - - - - -
L80 6,260 7,720 7,670 8,460 8,300 2,567 - - - - - -
L80 HC 7,630 7,720 7,670 8,460 8,300 2,567 - - - - - -
R95 6,900 9,170 9,110 10,050 9,230 3,048 - - - - - -
P110 7,430 10,620 10,550 11,640 12,220 3,529 - - - - - -
P110 HC 9,430 10,620 10,550 11,640 12,220 3,529 - - - - - -
C110 7,430 10,620 10,550 11,640 11,240 3,529 - - - - - -
Q125 7,840 12,060 11,990 13,230 13,280 4,010 - - - - - -
Q125 HC 9,700 12,060 11,990 13,230 13,280 4,010 - - - - - -
N80 6,750 8,000 7,950 8,760 7,500 2,654 - - - - - -
L80 6,750 8,000 7,950 8,760 8,620 2,654 - - - - - -
L80 HC 8,070 8,000 7,950 8,760 8,620 2,654 - - - - - - R95 7,500 9,500 9,440 10,400 9,580 3,152 - - - - - -
P110 8,130 11,000 10,930 12,040 12,680 3,649 - - - - - -
P110 HC 10,200 11,000 10,930 12,040 12,680 3,649 - - - - - -
C110 8,130 11,000 10,930 12,040 11,670 3,649 - - - - - -
Q125 8,650 12,500 12,420 13,680 13,780 4,147 - - - - - -
Q125 HC 10,540 12,500 12,420 13,680 13,780 4,147 - - - - - -
N80 6,960 8,120 8,070 8,880 7,620 2,691 - - - - - -
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 106/124
Casing Dimensions andMinimum Performance Properties
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
14 115.00 114.48 0.812 33.642 12.189 12.250
14 116.00 115.53 0.820 33.953 12.173 12.250
14 120.00 119.49 0.850 35.115 12.113 N/A
16 65.00 62.64 0.375 18.408 15.063 N/A
16 84.00 82.05 0.495 24.112 14.823 N/A
16 75.00 72.86 0.438 21.414 14.937 N/A
pg. 88 / Vallourec USA Corporation / Performance Data 11 3/4” - 26”
L80 6,960 8,120 8,070 8,880 8,750 2,691 - - - - - -
L80 HC 8,100 8,880 8,820 9,710 8,750 2,944 - - - - - -
R95 7,750 9,640 9,580 10,540 9,730 3,196 - - - - - -
P110 8,430 11,170 11,090 12,210 12,880 3,701 - - - - - -
P110 HC 10,250 12,690 12,600 13,870 13,920 4,205 - - - - - -
C110 8,430 11,170 11,090 12,210 11,850 3,701 - - - - - -
Q125 8,990 12,690 12,600 13,870 14,000 4,205 - - - - - -
Q125 HC 10,560 13,700 13,610 14,980 14,430 4,542 - - - - - -
N80 7,100 8,200 8,150 8,960 7,700 2,716 - - - - - -
L80 7,100 8,200 8,150 8,960 8,840 2,716 - - - - - -
L80 HC 8,120 8,200 8,150 8,960 8,840 2,716 - - - - - -
R95 7,920 9,740 9,670 10,640 9,830 3,226 - - - - - -
P110 8,630 11,280 11,200 12,320 13,020 3,735 - - - - - -
P110 HC 10,350 11,280 11,200 12,320 13,020 3,735 - - - - - -
C110 8,630 11,280 11,200 12,320 11,980 3,735 - - - - - -
Q125 9,230 12,810 12,730 14,000 14,150 4,244 - - - - - -
Q125 HC 10,580 12,810 12,730 14,000 14,150 4,244 - - - - - -
N80 7,630 8,500 8,440 9,270 7,990 2,809 - - - - - -
L80 7,630 8,500 8,440 9,270 9,180 2,809 - - - - - -
L80 HC 8,160 8,500 8,440 9,270 9,180 2,809 - - - - - -
R95 8,560 10,090 10,020 11,010 10,210 3,336 - - - - - -
P110 9,380 11,690 11,600 12,750 13,520 3,863 - - - - - -
P110 HC 10,400 11,690 11,600 12,750 13,520 3,863 - - - - - -
C110 9,380 11,690 11,600 12,750 12,440 3,863 - - - - - -
Q125 10,090 13,280 13,190 14,490 14,690 4,389 - - - - - -
Q125 HC 10,600 13,280 13,190 14,490 14,690 4,389 - - - - - -
J55 630 2,260 2,250 2,550 2,230 1,012 2,260 591 - - 2,260 1,03
K55 630 2,260 2,250 2,550 2,830 1,012 2,260 625 - - 2,260 1,14
J55 1,010 2,630 2,630 2,960 2,610 1,178 2,630 710 - - 2,630 1,20 K55 1,010 2,630 2,630 2,960 3,310 1,178 2,630 752 - - 2,630 1,33
K55 1,400 2,980 2,970 3,340 3,750 1,326 2,980 865 - - 2,980 1,49
N80 1,480 4,330 4,320 4,850 3,990 1,929 3,230 1,167 - - 3,550 1,89
L80 1,480 4,330 4,320 4,850 4,570 1,929 3,230 1,156 - - 3,550 1,86
L80 HC 1,840 4,330 4,320 4,850 4,570 1,929 3,230 1,156 - - 3,550 1,86
C90 1,480 4,870 4,860 5,460 5,310 2,170 3,230 1,284 - - 3,550 2,04
C90 HC 1,850 4,870 4,860 5,460 5,310 2,170 3,230 1,284 - - 3,550 2,04
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 107/124
Casing Dimensions andMinimum Performance Properties
Vallourec USA Corporation / Performance Data 11 3/4” - 26” / pg.
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
16 84.00 82.05 0.495 24.112 14.823 N/A
16 94.50 92.75 0.562 27.257 14.689 N/A
16 97.00 94.81 0.575 27.864 14.663 N/A
R95 1,480 5,140 5,130 5,760 5,080 2,291 3,230 1,354 - - 3,550 2,15
T95 1,480 5,140 5,130 5,760 5,610 2,291 3,230 1,354 - - 3,550 2,15
T95 HC 1,860 5,140 5,130 5,760 5,610 2,291 3,230 1,354 - - 3,550 2,15
P110 1,480 5,960 5,940 6,670 6,720 2,652 3,230 1,575 - - 3,550 2,5
P110 HC 1,860 5,960 5,940 6,670 6,720 2,652 3,230 1,575 - - 3,550 2,5
C110 1,480 5,960 5,940 6,670 6,180 2,652 3,230 1,552 - - 3,550 2,44
Q125 1,480 6,770 6,760 7,580 7,300 3,014 3,230 1,773 - - 3,550 2,80
Q125 HC 1,880 6,770 6,760 7,580 7,300 3,014 3,230 1,773 - - 3,550 2,80
K55 1,860 3,380 3,370 3,770 4,270 1,499 - - - - - -
N80 2,140 4,920 4,910 5,490 4,550 2,181 - - - - - -
L80 2,140 4,920 4,910 5,490 5,210 2,181 - - - - - -
L80 HC 2,650 4,920 4,910 5,490 5,210 2,181 - - - - - -
C90 2,180 5,530 5,520 6,180 6,050 2,453 - - - - - -
C90 HC 2,660 5,530 5,520 6,180 6,050 2,453 - - - - - -
R95 2,190 5,840 5,830 6,520 5,790 2,589 - - - - - -
T95 2,190 5,840 5,830 6,520 6,390 2,589 - - - - - -
T95 HC 2,690 5,840 5,830 6,520 6,390 2,589 - - - - - -
P110 2,190 6,760 6,750 7,550 7,650 2,998 - - - - - -
P110 HC 2,730 6,760 6,750 7,550 7,650 2,998 - - - - - -
C110 2,190 6,760 6,750 7,550 7,040 2,998 - - - - - -
Q125 2,190 7,680 7,670 8,580 8,310 3,407 - - - - - -
Q125 HC 2,740 7,680 7,670 8,580 8,310 3,407 - - - - - -
K55 1,950 3,460 3,450 3,860 4,370 1,533 - - - - - -
N80 2,270 5,030 5,020 5,610 4,660 2,229 - - - - - -
L80 2,270 5,030 5,020 5,610 5,330 2,229 - - - - - -
L80 HC 2,650 5,030 5,020 5,610 5,330 2,229 - - - - - -
C90 2,330 5,660 5,650 6,310 6,190 2,508 - - - - - -
C90 HC 2,660 5,660 5,650 6,310 6,190 2,508 - - - - - -
R95 2,350 5,970 5,960 6,670 5,930 2,647 - - - - - - T95 2,350 5,970 5,960 6,670 6,540 2,647 - - - - - -
T95 HC 2,690 5,970 5,960 6,670 6,540 2,647 - - - - - -
P110 2,340 6,920 6,900 7,720 7,830 3,065 - - - - - -
P110 HC 2,730 6,920 6,900 7,720 7,830 3,065 - - - - - -
C110 2,340 6,920 6,900 7,720 7,210 3,065 - - - - - -
Q125 2,340 7,860 7,840 8,770 8,510 3,483 - - - - - -
Q125 HC 2,740 7,860 7,840 8,770 8,510 3,483 - - - - - -
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 108/124
Casing Dimensions andMinimum Performance Properties
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
16 109.00 107.60 0.656 31.622 14.501 N/A
16 118.00 116.83 0.715 34.334 14.383 N/A
16 128.00 127.06 0.781 37.341 14.251 N/A
pg. 90 Vallourec USA Corporation / Performance Data 11 3/4” - 26”
N80 3,080 5,740 5,720 6,370 5,330 2,530 - - - - - -
L80 3,080 5,740 5,720 6,370 6,110 2,530 - - - - - -
L80 HC 4,060 5,740 5,720 6,370 6,110 2,530 - - - - - -
C90 3,250 6,460 6,440 7,170 7,090 2,846 - - - - - -
C90 HC 4,080 6,460 6,440 7,170 7,090 2,846 - - - - - -
R95 3,320 6,820 6,790 7,570 6,790 3,004 - - - - - -
T95 3,320 6,820 6,790 7,570 7,490 3,004 - - - - - -
T95 HC 4,180 6,820 6,790 7,570 7,490 3,004 - - - - - -
P110 3,470 7,890 7,870 8,770 8,980 3,478 - - - - - -
P110 HC 4,300 7,890 7,870 8,770 8,980 3,478 - - - - - -
C110 3,470 7,890 7,870 8,770 8,260 3,478 - - - - - -
Q125 3,520 8,970 8,940 9,960 9,750 3,953 - - - - - -
Q125 HC 4,330 8,970 8,940 9,960 9,750 3,953 - - - - - -
N80 3,690 6,260 6,230 6,930 5,820 2,747 - - - - - -
L80 3,690 6,260 6,230 6,930 6,670 2,747 - - - - - -
L80 HC 5,030 6,260 6,230 6,930 6,670 2,747 - - - - - -
C90 3,920 7,040 7,010 7,790 7,760 3,090 - - - - - -
C90 HC 5,150 7,040 7,010 7,790 7,760 3,090 - - - - - -
R95 4,030 7,430 7,400 8,220 7,420 3,262 - - - - - -
T95 4,030 7,430 7,400 8,220 8,190 3,262 - - - - - -
T95 HC 5,260 7,430 7,400 8,220 8,190 3,262 - - - - - -
P110 4,300 8,600 8,570 9,520 9,810 3,777 - - - - - -
P110 HC 5,490 8,600 8,570 9,520 9,810 3,777 - - - - - -
C110 4,300 8,600 8,570 9,520 9,030 3,777 - - - - - -
Q125 4,490 9,780 9,740 10,820 10,660 4,292 - - - - - -
Q125 HC 5,540 9,780 9,740 10,820 10,660 4,292 - - - - - -
N80 4,700 6,830 6,800 7,540 6,380 2,987 - - - - - -
L80 4,700 6,830 6,800 7,540 7,310 2,987 - - - - - -
L80 HC 6,110 6,830 6,800 7,540 7,310 2,987 - - - - - - C90 4,930 7,690 7,650 8,480 8,500 3,361 - - - - - -
C90 HC 6,230 7,690 7,650 8,480 8,500 3,361 - - - - - -
R95 5,020 8,120 8,080 8,950 8,130 3,547 - - - - - -
T95 5,020 8,120 8,080 8,950 8,980 3,547 - - - - - -
T95 HC 6,530 8,120 8,080 8,950 8,980 3,547 - - - - - -
P110 5,240 9,400 9,350 10,360 10,760 4,108 - - - - - -
P110 HC 6,980 9,400 9,350 10,360 10,760 4,108 - - - - - -
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 109/124
Casing Dimensions andMinimum Performance Properties
Vallourec USA Corporation / Performance Data 11 3/4” - 26” / pg.
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
16 128.00 127.06 0.781 37.341 14.251 N/A
16 138.00 137.66 0.850 40.456 14.113 N/A
16 147.00 146.19 0.906 42.962 14.001 N/A
18 5/8 87.50 84.59 0.435 24.858 17.568 N/A
C110 5,240 9,400 9,350 10,360 9,900 4,108 - - - - - -
Q125 5,570 10,680 10,630 11,780 11,690 4,668 - - - - - -
Q125 HC 7,090 10,680 10,630 11,780 11,690 4,668 - - - - - -
N80 5,760 7,440 7,400 8,170 6,960 3,236 - - - - - -
L80 5,760 7,440 7,400 8,170 7,990 3,236 - - - - - -
L80 HC 7,170 7,440 7,400 8,170 7,990 3,236 - - - - - -
C90 6,130 8,370 8,320 9,190 9,290 3,641 - - - - - -
C90 HC 7,300 8,370 8,320 9,190 9,290 3,641 - - - - - -
R95 6,300 8,830 8,780 9,700 8,880 3,843 - - - - - -
T95 6,300 8,830 8,780 9,700 9,810 3,843 - - - - - -
T95 HC 7,840 8,830 8,780 9,700 9,810 3,843 - - - - - -
P110 6,730 10,230 10,170 11,230 11,750 4,450 - - - - - -
P110 HC 8,640 10,230 10,170 11,230 11,750 4,450 - - - - - -
C110 6,730 10,230 10,170 11,230 10,810 4,450 - - - - - -
Q125 7,020 11,620 11,560 12,770 12,770 5,057 - - - - - -
Q125 HC 8,850 11,620 11,560 12,770 12,770 5,057 - - - - - -
N80 6,620 7,930 7,880 8,680 7,430 3,437 - - - - - -
L80 6,620 7,930 7,880 8,680 8,540 3,437 - - - - - -
L80 HC 7,960 7,930 7,880 8,680 8,540 3,437 - - - - - -
C90 7,110 8,920 8,860 9,770 9,930 3,867 - - - - - -
C90 HC 8,010 8,920 8,860 9,770 9,930 3,867 - - - - - -
R95 7,340 9,410 9,360 10,310 9,490 4,081 - - - - - -
T95 7,340 9,410 9,360 10,310 10,490 4,081 - - - - - -
T95 HC 8,850 9,410 9,360 10,310 10,490 4,081 - - - - - -
P110 7,950 10,900 10,830 11,940 12,560 4,726 - - - - - -
P110 HC 10,000 10,900 10,830 11,940 12,560 4,726 - - - - - -
C110 7,950 10,900 10,830 11,940 11,560 4,726 - - - - - -
Q125 8,440 12,390 12,310 13,560 13,650 5,370 - - - - - -
Q125 HC 10,330 12,390 12,310 13,560 13,650 5,370 - - - - - - K55 630 2,250 2,250 2,540 2,820 1,367 - - - - - -
N80 630 3,270 3,270 3,690 3,000 1,989 - - - - - -
L80 630 3,270 3,270 3,690 3,430 1,989 - - - - - -
L80 HC 630 3,270 3,270 3,690 3,430 1,989 - - - - - -
R95 630 3,880 3,880 4,380 3,820 2,362 - - - - - -
P110 630 4,500 4,490 5,070 5,040 2,734 - - - - - -
P110 HC 630 4,500 4,490 5,070 5,040 2,734 - - - - - -
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 110/124
Casing Dimensions andMinimum Performance Properties
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
18 5/8 96.50 94.05 0.485 27.639 17.468 17.500
18 5/8 114.00 111.70 0.579 32.825 17.280 N/A
18 5/8 136.00 132.84 0.693 39.040 17.052 N/A
20 106.50 104.23 0.500 30.631 18.813 N/A
20 94.00 91.59 0.438 26.918 18.937 N/A
18 5/8 139.00 137.81 0.720 40.500 16.998 17.000
20 118.50 116.98 0.563 34.379 18.687 N/A
pg. 92 / Vallourec USA Corporation / Performance Data 11 3/4” - 26”
K55 870 2,510 2,500 2,820 3,150 1,520 - - - - - -
N80 870 3,650 3,640 4,100 3,350 2,211 - - - - - -
L80 870 3,650 3,640 4,100 3,830 2,211 - - - - - -
L80 HC 870 3,650 3,640 4,100 3,830 2,211 - - - - - -
R95 870 4,330 4,320 4,870 4,260 2,626 - - - - - -
P110 870 5,010 5,010 5,640 5,630 3,040 - - - - - -
P110 HC 870 5,010 5,010 5,640 5,630 3,040 - - - - - -
K55 1,420 2,990 2,990 3,350 3,770 1,805 - - - - - -
N80 1,500 4,350 4,340 4,880 4,010 2,626 - - - - - -
L80 1,500 4,350 4,340 4,880 4,590 2,626 - - - - - -
L80 HC 1,500 4,350 4,340 4,880 4,590 2,626 - - - - - -
R95 1,500 5,170 5,160 5,790 5,110 3,118 - - - - - -
P110 1,500 5,980 5,970 6,710 6,750 3,611 - - - - - -
P110 HC 1,500 5,980 5,970 6,710 6,750 3,611 - - - - - -
K55 2,090 3,580 3,570 3,990 4,530 2,147 - - - - - -
N80 2,480 5,210 5,200 5,810 4,820 3,123 - - - - - -
L80 2,480 5,210 5,200 5,810 5,530 3,123 - - - - - -
L80 HC 2,480 5,210 5,200 5,810 5,530 3,123 - - - - - -
R95 2,590 6,190 6,170 6,890 6,140 3,709 - - - - - -
P110 2,610 7,160 7,140 7,980 8,120 4,294 - - - - - -
P110 HC 2,610 7,160 7,140 7,980 8,120 4,294 - - - - - -
K55 2,250 3,720 3,710 4,140 4,710 2,228 - - - - - -
N80 2,710 5,410 5,400 6,020 5,020 3,240 - - - - - -
L80 2,710 5,410 5,400 6,020 5,750 3,240 - - - - - -
L80 HC 2,710 5,410 5,400 6,020 5,750 3,240 - - - - - -
R95 2,870 6,430 6,410 7,150 6,390 3,848 - - - - - -
P110 2,930 7,440 7,420 8,280 8,450 4,455 - - - - - -
P110 HC 2,930 7,440 7,420 8,280 8,450 4,455 - - - - - -
K55 520 2,110 2,110 2,380 2,640 1,480 2,110 824 2,110 955 2,110 1,47 K55 770 2,410 2,400 2,710 3,020 1,685 2,400 960 2,410 1,113 2,310 1,68
N80 770 3,500 3,500 3,940 3,220 2,450 2,400 1,307 2,410 1,511 2,310 2,28
L80 770 3,500 3,500 3,940 3,680 2,450 2,400 1,296 2,410 1,497 2,310 2,25
L80 HC 770 3,500 3,500 3,940 3,680 2,450 2,400 1,296 2,410 1,497 2,310 2,2
K55 1,100 2,710 2,710 3,040 3,400 1,891 - - - - - -
N80 1,110 3,940 3,930 4,430 3,630 2,750 - - - - - -
L80 1,110 3,940 3,930 4,430 4,150 2,750 - - - - - -
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 111/124
Casing Dimensions andMinimum Performance Properties
Vallourec USA Corporation / Performance Data 11 3/4” - 26” / pg.
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative drift
IP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
20 118.50 116.98 0.563 34.379 18.687 N/A
20 147.00 146.21 0.709 42.969 18.395 N/A
20 133.00 131.45 0.635 38.631 18.543 N/A
20 169.00 166.56 0.812 48.948 18.189 N/A
24 162.00 158.61 0.635 46.611 22.543 N/A
24 174.00 171.45 0.688 50.387 22.437 N/A
24 189.00 186.41 0.750 54.782 22.313 N/A
26 207.00 202.44 0.750 59.494 24.313 N/A
L80 HC 1,110 3,940 3,930 4,430 4,150 2,750 - - - - - -
R95 1,110 4,680 4,670 5,260 4,620 3,266 - - - - - -
P110 1,110 5,420 5,410 6,090 6,100 3,782 - - - - - -
K55 1,490 3,060 3,050 3,420 3,850 2,125 2,400 1,253 2,410 1,453 2,310 2,12
N80 1,600 4,450 4,440 4,980 4,100 3,091 2,400 1,707 2,410 1,973 2,310 2,87
L80 1,600 4,450 4,440 4,980 4,700 3,091 2,400 1,692 2,410 1,955 2,310 2,84
L80 HC 1,600 4,450 4,440 4,980 4,700 3,091 2,400 1,692 2,410 1,955 2,310 2,84
R95 1,600 5,280 5,270 5,910 5,220 3,670 2,400 1,985 2,410 2,293 2,310 3,34
P110 1,600 6,110 6,100 6,840 6,900 4,249 2,400 2,309 2,410 2,667 2,310 3,88
K55 1,900 3,410 3,400 3,810 4,310 2,363 - - - - - -
N80 2,190 4,960 4,950 5,540 4,590 3,437 - - - - - -
L80 2,190 4,960 4,950 5,540 5,260 3,437 - - - - - -
L80 HC 2,190 4,960 4,950 5,540 5,260 3,437 - - - - - -
R95 2,250 5,890 5,880 6,580 5,850 4,082 - - - - - -
P110 2,250 6,820 6,810 7,620 7,720 4,727 - - - - - -
K55 2,500 3,910 3,900 4,340 4,950 2,692 - - - - - -
N80 3,020 5,680 5,670 6,310 5,270 3,916 - - - - - -
L80 3,020 5,680 5,670 6,310 6,040 3,916 - - - - - -
L80 HC 3,020 5,680 5,670 6,310 6,040 3,916 - - - - - -
R95 3,250 6,750 6,730 7,500 6,720 4,650 - - - - - -
P110 3,370 7,820 7,790 8,680 8,890 5,384 - - - - - -
K55 920 2,550 2,540 2,870 3,200 2,564 - - - - - -
N80 920 3,700 3,700 4,170 3,410 3,729 - - - - - -
K55 1,160 2,760 2,750 3,100 3,470 2,771 - - - - - -
N80 1,170 4,010 4,010 4,510 3,700 4,031 - - - - - -
L80 1,170 4,010 4,010 4,510 4,230 4,031 - - - - - -
R95 1,170 4,770 4,760 5,350 4,700 4,787- - - - - -
P110 1,170 5,520 5,510 6,200 6,210 5,543 - - - - - -
K55 1,440 3,010 3,000 3,370 3,790 3,013 - - - - - - N80 1,530 4,380 4,370 4,900 4,040 4,383 - - - - - -
L80 1,530 4,380 4,370 4,900 4,620 4,383 - - - - - -
R95 1,530 5,200 5,190 5,820 5,140 5,204 - - - - - -
P110 1,530 6,020 6,000 6,740 6,780 6,026 - - - - - -
K55 1,180 2,780 2,770 3,120 3,490 3,272 - - - - - -
N80 1,190 4,040 4,030 4,530 3,720 4,760 - - - - - -
L80 1,190 4,040 4,030 4,530 4,260 4,760 - - - - - -
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 112/124
R95 1,190 4,800 4,790 5,380 4,730 5,652 - - - - - -
K55 1,440 3,010 3,000 3,370 3,780 3,534 - - - - - -
N80 1,520 4,370 4,360 4,900 4,030 5,140 - - - - - -
R95 1,520 5,190 5,180 5,820 5,130 6,104 - - - - - -
Casing Dimensions andMinimum Performance Properties
Abbreviated Terms
SC short round thread casingLC long round thread casingBC buttress thread casing ALT. alternative driftIP internal pressurePBYS pipe body yield strength
ConnectionsPipe Body
Grade
OD Area DriftWallWeightIP
(Barlow)CollapsePressure
PBYS 8rd LC8rd SC BC
(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2 )(lb/ft)
PET&C API ALT.
(kips) (psi)(psi) (psi)(kips)(kips) (kip
IP(Lame’-
open)
IP(Lame’-
capped)
IP(Lame’-
ductilerupture) Jt.StrengthJt.Strength JtStrenIPIP IP
26 223.00 218.64 0.812 64.254 24.189 N/A
26 207.00 202.44 0.750 59.494 24.313 N/A
pg. 94 / Vallourec USA Corporation / Performance Data 11 3/4” - 26”
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 113/124
Marking & Color Codes
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 114/124
Marking & Color Codes
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 115/124
pg. 95 / Vallourec USA Corporation / Marking
Marking
J u l y
2 0 1 4
Example 1: 9-5/8” 53.50# Q125 DWC/C
Vallourec Star 5CT-XXXX
manufacturer
licensenumber
APImonogram
X/XX
date ofmanufacture(last digit of
year/ month)
Example 2: 9-5/8” 53.50# P110MS VAM TOP
Example 3: 5-1/2” 23.00# P110EC VAM SG
S
end f
Vallourec Star 5CT-XXXX
manufacturer
licensenumber
APImonogram
X/XX
date ofmanufacture(last digit of
year/ month)
S
end f
Vallourec Star 5CT-XXXX
manufacturer
licensenumber
APImonogram
X/XX
date ofmanufacture(last digit of
year/ month)
S
end f
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 116/124
0 Q1 XXF S S2L2 PXXXXX DWC/C DA 8.500 JtXXX W/O XXXXXX SLN XXXXXX Made in USA XX.X XXXX
wt/ft
grade
reducedalternativeimpact testtemperatureif applicable
seamlessprocess ofmanufacture
testpressure
type ofthread
specialdrift
serialization
heatnumber
countryof origin
length
weight
supplementaryrequirements ifapplicable
XX
workordernumber
compatiblestandards(EC, HC,HCE, RY, E,MS)
0 P XXF S S2L2 PXXXXX VAM TOP DA 8.500 JtXXX W/O XXXXXX SLN XXXXXX Made in USA XX.X XXXX
wt/ft
grade
reducedalternativeimpact testtemperatureif applicable
seamlessprocess ofmanufacture
testpressure
type ofthread
specialdrift
serialization
heatnumber
countryof origin
length
weight
supplementaryrequirements ifapplicable
MS
workordernumber
compatiblestandards(EC, HC,HCE, RY, E,MS)
0 P XXF S [ ] PXXXXX VAM SG D JtXXX W/O XXXXXX SLN XXXXXX Made in USA XX.X XXXX
wt/ft
grade
reducedalternativeimpact testtemperatureif applicable
seamlessprocess ofmanufacture
testpressure
type ofthread
drift
serialization
heatnumber
countryof origin
length
weight
supplementaryrequirements ifapplicable
EC
workordernumber
compatiblestandards(EC, HC,HCE, RY, E,MS)
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 117/124
Heat Traceability
Vallourec's SLN (Schedule Line Number)
is assigned at the time of rolling to provide
heat identifcation and traceability
throughout the entire process.
Casing Thread-Type Identifcation
SymbolsShort Round Thread SC
Long Round Thread LC
Buttress Thread BC
* Special clearance couplings shall also
have a black band.
* * Seal-ring couplings shall also have a
blue band.
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 118/124
pg. 96 / Vallourec USA Corporation / Color Codes
Color Codes
Grade Coupling Pipe color code color for threaded and/or code plain end pipes
Coupling Pipe
Entire Band 1 Band 2 Band 3 Band 4 Band 1 Band 2 Band 3 Band 4 Band 5
J55 tubing Green Green
J55 casing Green White Green
K55 Green Green Green
N80 Type 1 Red Red
N80 Q Red Green Red Green
R95 Brown Brown
L80 Type 1 Red Brown Red Brown
L80 9CR Yellow Yellow Red Brown Yellow Yellow
L80 13CR Yellow Red Brown Yellow
C90 Purple Purple
T95 Silver Silver
C110 White Brown Brown White Brown Brown
P110 White White
Q125 Orange Orange
API Grades - API 9th Edition
No entirecolor painting
No entirecolor painting
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 119/124
pg. 97 / Vallourec USA Corporation / Color Codes
Color Codes
VMS 55 HC Red Green Green Green Black
L80 Type 1 HC Red Brown Red Brown Black
L80 Type 1 HCE Red Brown Pink Pink Red Brown Black Pink Pink
VM 80 ECL Red Brown Orange Orange Light Red Brown Orange Orange Light
C90 HC Purple Purple Black
T95 E Silver Pink Pink Silver Pink Pink
T95 HC Silver Silver Black
T95 HCE Silver Pink Pink Silver Black Pink Pink
P110 MS White Dark Dark Orange White Dark Dark Orange
P110 RY White Dark Dark White Dark Dark
P110 EC White Light Light White Light Light
P110 HCE White Pink Pink White Black Pink Pink
Q125 HC Orange Orange Black
Q125 HCE Orange Pink Pink Orange Black Pink Pink
Vallourec API Enhanced Grades
(N80 Q coupling)
green green green green
green green green green
blue blue blue blue
blue blue
Grade Coupling Pipe color code color for threaded and/or code plain end pipes
Coupling Pipe
Entire Band 1 Band 2 Band 3 Band 4 Band 1 Band 2 Band 3 Band 4 Band 5
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 120/124
pg. 98 / Vallourec USA Corporation / Color Codes
Color Codes
VM 80 HC Red Green Green Red Green Green
VM 95 HC Brown Green Brown Green
VM 110 HC White Green White Green
VM 125 HC Orange Green Orange Green
VM 125 HYHC Orange Orange Purple Green
VM 140 HC Pink White Green Pink White Green
VM 150 HC Dark White Green Dark White Green
VM 80 HCSS Red Brown Green Orange Orange Red Brown Green Orange Orange
VM 90 HCSS Purple Green Orange Orange Purple Green Orange Orange
VM 95 HCSS Silver Green Orange Orange Silver Green Orange Orange
VM 110 HCSS White Brown Brown Green Orange White Brown Brown Green Orange
VM 125 HCSS Orange Green Silver Silver Orange Green Silver Silver
Vallourec High Collapse Grades
(Q125 coupling)
green green
Vallourec Sour Service & High Collapse Grades
Grade Coupling Pipe color code color for threaded and/or code plain end pipes
Coupling Pipe
Entire Band 1 Band 2 Band 3 Band 4 Band 1 Band 2 Band 3 Band 4 Band 5
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 121/124
VM 80 SS Red Brown Orange Orange Red Brown Orange Orange
VM 90 SS Purple Orange Orange Purple Orange Orange
VM 95 SS Silver Orange Orange Silver Orange Orange
VM 100 SS Blue Orange Orange Blue Orange Orange
VM 110 SS White Brown Brown Orange White Brown Brown Orange
VM 125 SS Orange Silver Silver Orange Silver Silver
VM 80 IRP Red Brown Brown Orange Orange Red Brown Brown Orange Orange
VM 90 IRP Purple Brown Orange Orange Purple Brown Orange Orange
VM 95 IRP Silver Brown Orange Orange Silver Brown Orange Orange
VM 140 CY Orange Orange Purple
VM 125 CY Orange Brown Purple Orange Brown Purple
VM 130 CY Orange Yellow Purple Orange Yellow Purple
VM 140 CY Orange Purple Orange Purple
Vallourec Sour Service Grades
(T95)
(T95)
(Q125 coupling)
Vallourec HY / CY Grades
VM125HY-VM140CY
Grade Coupling Pipe color code color for threaded and/or code plain end pipes
Coupling Pipe
Entire Band 1 Band 2 Band 3 Band 4 Band 1 Band 2 Band 3 Band 4 Band 5
Color Codes
pg. 99 / Vallourec USA Corporation / Color Cod
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 122/124
Vallourec Deep Well Grades
Vallourec Risers Grades
Vallourec 13%Cr Grades
Vallourec Super 13%Cr Grades
greengreen
(R95)
(T95)
Grade Coupling Pipe color code color for threaded and/or code plain end pipes
Coupling Pipe
Entire Band 1 Band 2 Band 3 Band 4 Band 1 Band 2 Band 3 Band 4 Band 5
VM 140 Pink White Pink White
VM 150 Dark White Dark White
VM 95 R Brown Blue Blue Brown Blue Blue
VM 95 RSS Silver Blue Blue Brown Silver Blue Blue Brown
VM 110 R White Blue Blue White Blue Blue
VM 110 RSS White Brown Brown Blue Blue White Brown Brown Blue Blue
VM 125 R Orange Blue Blue Orange Blue Blue
VM 80 13CR Red Yellow Orange Red Brown Yellow Orange
VM 85 13CR Blue Yellow Blue Yellow
VM 90 13CR Purple Yellow Purple Yellow
VM 95 13CR Brown Yellow Brown Yellow
VM 95 13CRSS Yellow White Green Silver White Green Silver
VM 110 13CRSS Yellow White Green White White Green White
VM 125 13CRSS Yellow White Green Orange White Green Orange
VM 110 13ECRSSCY Yellow White Green White Purple White Green White Purple
pg. 100 / Vallourec USA Corporation / Color Codes
Color Codes
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 123/124
7/23/2019 Usa Octg Catalog
http://slidepdf.com/reader/full/usa-octg-catalog 124/124
Sales Offices
North America
South America
Europe
Africa Asia and Middle East
Steel Plants Manufacturing Plants Accessories and Repair VAM® Licensee Facilities VAM® Field Service Internation
Leader in Premium Tubular Solutions
y