Description

Never-Seez® Marine Grade prevents rust, gallingand galvanic corrosion in salt water, salt air andhigh-moisture environments. It is a provencombination of copper flakes, graphite, andaluminum paste suspended in a grease speciallyformulated for marine applications. This productwas developed from years of experience workingwith marine engineers to provide superior partsprotection in applications exposed to salt water.Never-Seez® Marine Grade is the best choice forprotection both above and below the water line.

Product Applications• Bilge piping• Water pump gaskets and flanges• Screw shafts• Prop shaft bearing housings• Winches, cables, and anchor chains• Hatch covers• Porthole studs• Rigging and hoist cables

Product Benefits• Excellent protection from salt water and

ionized water.• Excellent resistance to water washout.• Protection up to 1800°F (982°C).• Inhibits galvanic corrosion.• Extreme pressure resistance.

Limitations•Never-Seez® Marine Grade is not recommended for

high speed bearings. Never-Seez® Red BearingLubricant is suggested for these applications.

•For temperature resistance to 2400°F (1316°C),use Never-Seez® Pure Nickel Special.

Other Anti-Seize Lubricants

• Regular Grade• Nuclear Grade, Nickel Special• Pure Nickel Special• High Temperature Stainless• High Temperature Stainless, Nuclear Certified• Blue Moly Lubricant• Black Moly Lubricant• Red Bearing Lubricant• White Food Grade with PTFE• High Temperature Bearing Lubricant• Pipe Compound with Teflon®

• Lithium EP Grease

Marine Grade

Technical Specifications

Color Gray

Temperature Range, °F (°C) - 200°F to 1800°F (-129°C to 982°C)

Particle Size, mil (microns) 2 maximum (50µ)

Density (g/cm3) 1.24 – 1.32

Solvent Resistance Excellent in fresh, salt or ionized water

ASTM Test Method

NLGI Grade 1/2 D-217

Flash Point, °F (°C) >482°F (>250°C) D-92

Dropping Point, °F (°C) 460°F (238°C) D-566

Copper Corrosion Test, 212°F @ 24 hrs. No Corrosion D-130-8

Torque Coefficient, k Factor 0.130

Coefficient of Friction, 167°F (75°C), 4 ball 0.072 D-2266

Ingredients: Contains a special, water resistant grease with graphite, copper flake, aluminum powder and zinc oxide.

Shelf Life: Never-Seez® Marine Grade does not deteriorate with age when stored unopened at temperatures below 120°F (49°C).Quality and performance are guaranteed for five years after purchase on unopened containers.

Use in accordance with Material Safety Data Sheet.

Ordering Information:

NEVER-SEEZ® MARINE GRADE

STOCK NUMBER DESCRIPTION SIZE

NM-160 Flat Top 1 lb.

NMBT-8 Brush Top 8 oz.

NMBT-16 Brush Top 1 lb.

NM-42B Pail 42 lb.

NM-425B Drum 425 lb.

N13-05/08/02-5M

IMPORTANT NOTICEAll statements, technical information and recommendations set forth herein are based on tests which Bostik Findley, Inc. believes to bereliable. However, Bostik FIndley does not guarantee their accuracy or completeness. The buyer should conduct its own tests of thisproduct before use to determine proper preparation technique and suitability for proposed application. Any sales of this product shallbe on terms and conditions set forth on Bostik Findley's order acknowledgment. Bostik Findley, Inc. warrants that the productconforms with Bostik Findley’s written specifications, and is free from defects. BOSTIK FINDLEY, INC. DISCLAIMS ALL OTHERWARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR APARTICULAR PURPOSE. THE BUYER'S SOLE REMEDY FOR NONCOMPLIANCE WITH THIS WARRANTY SHALL BE FOR THEREPLACEMENT OF THE PRODUCT OR REFUND OF THE BUYER'S PURCHASE PRICE. IN NO CASE WILL BOSTIK FINDLEY BELIABLE FOR DIRECT, CONSEQUENTIAL ECONOMIC OR OTHER DAMAGES.

Bostik Findley, Inc.211 Boston StreetMiddleton, MA 1949-2128 USATechnical Service: 888-603-8558FAX: 978-750-7293http://www.bostikfindley-us.com

P R O D U C T D A T A

NEVER•SEEZ®

Anti-Seize & Lubricating Compound

®Teflon is a Registered Trademark of Dupont.

Description

Never-Seez® Marine Grade prevents rust, gallingand galvanic corrosion in salt water, salt air andhigh-moisture environments. It is a provencombination of copper flakes, graphite, andaluminum paste suspended in a grease speciallyformulated for marine applications. This productwas developed from years of experience workingwith marine engineers to provide superior partsprotection in applications exposed to salt water.Never-Seez® Marine Grade is the best choice forprotection both above and below the water line.

Product Applications• Bilge piping• Water pump gaskets and flanges• Screw shafts• Prop shaft bearing housings• Winches, cables, and anchor chains• Hatch covers• Porthole studs• Rigging and hoist cables

Product Benefits• Excellent protection from salt water and

ionized water.• Excellent resistance to water washout.• Protection up to 1800°F (982°C).• Inhibits galvanic corrosion.• Extreme pressure resistance.

Limitations•Never-Seez® Marine Grade is not recommended for

high speed bearings. Never-Seez® Red BearingLubricant is suggested for these applications.

•For temperature resistance to 2400°F (1316°C),use Never-Seez® Pure Nickel Special.

Other Anti-Seize Lubricants

• Regular Grade• Nuclear Grade, Nickel Special• Pure Nickel Special• High Temperature Stainless• High Temperature Stainless, Nuclear Certified• Blue Moly Lubricant• Black Moly Lubricant• Red Bearing Lubricant• White Food Grade with PTFE• High Temperature Bearing Lubricant• Pipe Compound with Teflon®

• Lithium EP Grease

Marine Grade

Technical Specifications

Color Gray

Temperature Range, °F (°C) - 200°F to 1800°F (-129°C to 982°C)

Particle Size, mil (microns) 2 maximum (50µ)

Density (g/cm3) 1.24 – 1.32

Solvent Resistance Excellent in fresh, salt or ionized water

ASTM Test Method

NLGI Grade 1/2 D-217

Flash Point, °F (°C) >482°F (>250°C) D-92

Dropping Point, °F (°C) 460°F (238°C) D-566

Copper Corrosion Test, 212°F @ 24 hrs. No Corrosion D-130-8

Torque Coefficient, k Factor 0.130

Coefficient of Friction, 167°F (75°C), 4 ball 0.072 D-2266

Ingredients: Contains a special, water resistant grease with graphite, copper flake, aluminum powder and zinc oxide.

Shelf Life: Never-Seez® Marine Grade does not deteriorate with age when stored unopened at temperatures below 120°F (49°C).Quality and performance are guaranteed for five years after purchase on unopened containers.

Use in accordance with Material Safety Data Sheet.

Ordering Information:

NEVER-SEEZ® MARINE GRADE

STOCK NUMBER DESCRIPTION SIZE

NM-160 Flat Top 1 lb.

NMBT-8 Brush Top 8 oz.

NMBT-16 Brush Top 1 lb.

NM-42B Pail 42 lb.

NM-425B Drum 425 lb.

N13-05/08/02-5M

IMPORTANT NOTICEAll statements, technical information and recommendations set forth herein are based on tests which Bostik Findley, Inc. believes to bereliable. However, Bostik FIndley does not guarantee their accuracy or completeness. The buyer should conduct its own tests of thisproduct before use to determine proper preparation technique and suitability for proposed application. Any sales of this product shallbe on terms and conditions set forth on Bostik Findley's order acknowledgment. Bostik Findley, Inc. warrants that the productconforms with Bostik Findley’s written specifications, and is free from defects. BOSTIK FINDLEY, INC. DISCLAIMS ALL OTHERWARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR APARTICULAR PURPOSE. THE BUYER'S SOLE REMEDY FOR NONCOMPLIANCE WITH THIS WARRANTY SHALL BE FOR THEREPLACEMENT OF THE PRODUCT OR REFUND OF THE BUYER'S PURCHASE PRICE. IN NO CASE WILL BOSTIK FINDLEY BELIABLE FOR DIRECT, CONSEQUENTIAL ECONOMIC OR OTHER DAMAGES.

Bostik Findley, Inc.211 Boston StreetMiddleton, MA 1949-2128 USATechnical Service: 888-603-8558FAX: 978-750-7293http://www.bostikfindley-us.com

P R O D U C T D A T A

NEVER•SEEZ®

Anti-Seize & Lubricating Compound

®Teflon is a Registered Trademark of Dupont.