user guide - all that...

User Guide

Before Using

Product Composition

Name of each part

QUAD LOCK® Mounting & Type

Smart Phone Mounting

Gun Handle Removal & Mounting

Displaying LED by Status

Power ON & OFF

Communication Mode Setting

Barcode and RFID Setting

Charging Device

Charging Device (Using USB Port via PC)

Charging Device (Using Cradle)

Support Concurrent Charging of Smart Phone

Using Bluetooth Data Communication Mode

Using USB Data Communication Mode

Bluetooth Connection with Android Phone

Bluetooth Connection with iPhone

Bluetooth Connection with Windows

USB Connection with Windows

ATS100 Specifications

Product Warranty

----------------------------------------------------------------------------------- 3

---------------------------------------------------------------------- 6

--------------------------------------------------------------------------- 6

------------------------------------------------------- 7

-------------------------------------------------------------------- 8

---------------------------------------------------- 9

------------------------------------------------------------- 10

--------------------------------------------------------------------------- 10

-------------------------------------------------------- 10

------------------------------------------------------------- 10

---------------------------------------------------------------------------- 11

--------------------------------------- 11

----------------------------------------------------- 12

------------------------------- 12

---------------------------------- 13

------------------------------------------ 14

------------------------------------ 15

------------------------------------------------- 27

--------------------------------------------- 32

----------------------------------------------------- 36

------------------------------------------------------------------- 44

------------------------------------------------------------------------- 47

2

Contents

The copyright of this manual can be found on ATID.Unauthorized use or reproduction of part or all of the contents of this manual without prior permission of ATID is prohibited.

3

Before Using

- The following conventions are used throughout this document to convey certain information.- Technical Support via the Internet is available 24 hours per day, 365 days per year.- This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation

In no event shall Atid Co., Ltd. or anyone else involved in the creation, production, or delivery of the accompanying product (including hardware and software) be liable for any damages whatsoever (including, without limitation, consequential damages including loss of business profits, business interruption, or loss of business information) arising out of the use of, the results of use of, or inability to use such product, even if Atid Co., Ltd. has been advised of the possibility of such damages. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

Charging Precautions

Do not place heavy material near device and do not pull power supply hardly.

Use damaged power supply may cause problem please replace it.

Icons UsedCaution Warns you of a situation where unpredictable happen or damage

Caution Warns you of a potential water shock situtation

4

Precautions when Using

Do not place the device next to heating equipment (It may cause conflagration or electronic damage.)

Do not use chemical on the device but wipe it out with smooth cloth or tower.

Icons usedCaution Warns you of a situation where unpredictable happen or damage

Caution warns you of a ban on disassemble

Caution Warns you of a potential water shock situation

Do not place too many power supply at the same time (It may cause conflagration or electronic damage)

Be careful not to let liquid or pull power supply.(It may cause failure and electronic damage)

In cleaning, do not splash water. (It may cause conflagration or device failure.)

Do not install the device in a place subject to direct sun light, humidity and dust. (It may cause conflagration or electronic damage.)

Do not place a magnet near the product

Do not disassemble , fix device and remodel device manually. Atid Co.,Ltd. is not responsible for any damage to or loss

5

6

Name of each part 5

7

6

4

3

2

1

1 Power Button2 Switch to Communication mode3 Reset Button4 Trigger5 QUAD LOCK® Connection Port6 2D Barcode Scanner7 UHF8 Barcode / RFID Switch Button9 Charge Indicator10 Barcode / RFID Indicator11 Communication Mode Indicator12 Hand strap Hole13 Sync Cable Connector14 Gun Handle Removal Button15 Gun Handle (With Battery)16 Cradle Connector

Product Composition

ATS100 Main Body

Hand strap

Gun Handle(With Battery)

QUAD LOCK® Mount(Option)

USB Sync Cable (Type-C)

QUAD LOCK® Adapter(Option)

User Guide &Warranty Strap

Cradle(Optional item)

14

13

12

15

16

11

10

9

8

M

CautionDo not connect any other such as USB than supplied QUAD LOCK®

to QUAD LOCK Connection port, it may cause malfunction of the Device.

7

1 The QUAD LOCK® contacts need to be face down at the top of the device to meet the contacts shown in the image right.

3 The QUAD LOCK® can be locked into position image right.

QUAD LOCK® Mounting

LOCK UNLOCK

QUAD LOCK® Type

Type-C Micro USBWe may provide USB Type-C and Micro USB.

*The standard USB cable will be Type-C.

2 The QUAD LOCK® direction to push is shown in the diagram right.

8

1 Ensure the phone is fitted into its QUAD LOCK® case before attaching the case to the ATS100.

2 Make sure all of the contacts - on both the QUAD LOCK® socket

3 Align the phone towards 45 degrees into the right place.

4 To put USB cable Phone USB Port.

Smart Phone Mounting

NoticeIf you don't want to use USB, it's not mandatory to use it.please note it.

9

1 Press removal button

3 Pull up the gun to release completely.

2 Pull out the gun to the right side to release it

Gun Handle Removal

Gun Handle Mounting

WarningBe careful your hand When you Control Gun Handle

2 Push the gun to the left side to mounting the gun

1 The Gun Handle needs to be face down at the device to meet the right place as image.

10

Power ONPress Power Button ( ) for a second then release with beep.

Power OFFPress Power Button ( ) for a second.

Charging Indicator - Red LED Blink : Low Battery - Red LED ON : Charging - Green LED ON : Charging Complete

Barcode / RFID Indicator - Blue LED ON : Barcode Mode - Blue LED Blink : Trigger Input Mode - Blue LED OFF : RFID Mode

Communication Mode Indicator - Green LED Blink : Bluetooth Mode - Red LED Blink : USB Mode

Communication Mode SettingPress arrow ( ) button it can be connected Bluetooth or USB.(Switching mode will be taked a couple of seconds)

Press M - Barcode mode, RFID and Trigger scanning mode.

Barcode and RFID setting

Displaying LED by Status

Communication Mode Indicator

Barcode / RFID IndicatorCharging Indicator

Charging Device

11

1 Input USB Connector to ATS100 2 Input USB Connector to PC

Charging Device (Using USB Port via PC)

2 Input Charging Connector to socket.

1 Input Charging Cable to ATS100 (USB Connector should be over 5V/2A )

NoticeThe Device will be Charging via PC however your Phone wouldn't be able to Charge at the same time.

1 Input Device to Cradle.

Charging Device (Using Cradle)2 Input USB Connector behind Cradle.

Notice- Cradle and Charging Connector will be Optional Items.- If you would like to buy them please call us.

3 Input Adapter to socket.

Support Concurrent Charging of Smart PhoneATS100 and mobile into QUAD LOCK® direct charging connection will allow to both simultaneously.

Important- Some Devices may not be Charged.- While Charging can not be Communicated via USB.- Charging device and mobile at the same time, Charging speed will be affected slowly.- Do not allow to Charge into PC, if you want to Charge simultaneously please use Charger Adapter- It does not allow to Quick Charge

12

13

Using Bluetooth Data Communication Mode

ImportantEnsure Bluetooth setting should be ok before trying to connect the reader.

3 Each time you press the Barcode / RFID Switch Button (M), the BLE / HID / SPP Mode Switches sequentially.

4 Press and hold the Power Button ( ) until the buzzer sounds to complete the Setting.

2 Press the Communication Mode Toggle Button ( ) to Set Indicator to Blink/ON in Green. (Set to Bluetooth Mode)

Click

Trigger

Click

Click Click

Indication by Bluetooth Mode - Green LED Blinks Fast : BLE Mode - Green LED remains ON : HID Mode - Green LED Blinks every 2 seconds : SPP Mode


1 With the trigger of the ATS100 pulled, press the power button ( ) to turn on the power.

iPhone - Using BLE Mode Android, Windows - Using SPP Mode or HID Mode(HID mode is not managed via ATS100 Demo App.)

Using USB Data Communication Mode

14

ImportantEnsure USB setting should be ok before trying to connect the reader.

Click Click

Click Click

Indication by USB Mode - Red LED Blinks every 2 seconds : VCP Mode - Red LED remains ON : HID Mode


2 Press the Communication Mode Toggle Button ( ) to Set Indicator to Blink/ON in Red. (Set to USB Mode)

1 With the trigger of the ATS100 pulled, press the power button ( ) to turn on the power.

3 Each time you press the Barcode / RFID Switch Button (M), the VCP / HID Mode Switches sequentially.

4 Press and hold the Power Button ( ) until the buzzer sounds to complete the Setting.

Trigger

iPhone - Unable to Support Android, Windows - Using VCP Mode or HID Mode(HID mode is not managed via ATS100 Demo App.)

15

Bluetooth Connection with Android Phone

Ensure the ATID Application for Android is Installed the mobile. Installation SDK : http://www.atid1.com

ImportantEnsure the ATS100 Bluetooth Mode with SPP.(See setting Bluetooth on page13)

2 Press "YES" to complete Bluetooth connection

1 Press the ATID Reader application.

ATID Reader

App Version X.X.X.XXXXXXXXXX

ATID Reader

Atid Co., Ltd.

06:59

NoticeBefore trying to connect to the mobile, it must be enabled from Android Ver. 4.2 (Jelly Bean).To be recommended ver.6.0(Mashmallow) for activation.

Application is requestingpermission to turn on BluetoothAllow?

NO YES

Click

16

4 Press "Scan Device".3 Press "New Device".

ATID Reader

Atid Co., Ltd.

06:59


Regist Device

Atid Co., Ltd.

06:59

Paired Devices

New Devices

Bluetooth USB

6 Press ( )5 Press the correct device on the New Devices list.

Regist Device

Atid Co., Ltd.

XX:XX:XX:XX:XX:XXATS100-XXXX

06:59

Paired Devices

New Devices

Bluetooth USB

ATID Reader

Atid Co., Ltd.

App Version

07:00

X.X.X.XXXXXXXXXX


Click Click

Click

Click

17

7 Press "Connect" 8 Press "OK" then it can be connected to ATS100 with beep.

ATID Reader

Atid Co., Ltd.

App Version

07:00

X.X.X.XXXXXXXXXX


ATID Reader

Atid Co., Ltd.

App Version

07:00

X.X.X.XXXXXXXXXX


Connect

Delete

Click

Bluetooth pairing request

Confirm passkey is XXXXXX to pair with ATS100-XXXX.

CANCLE OK

Click

2 Select "Disconnect" with beep

Bluetooth disconnection with Android1 Select ( ) in the right hand side arrow.

ATID Reader

Atid Co., Ltd.

App Version

07:00

X.X.X.XXXXXXXXXX


Disconnect

Delete

ATID Reader

Atid Co., Ltd.

App Version

07:00

X.X.X.XXXXXXXXXX


2 Select "Delete" to take out the device in the connection list

1 Select ( ) in the right hand side arrow.

ATID Reader

Atid Co., Ltd.

App Version

07:00

X.X.X.XXXXXXXXXX


ATID Reader

Atid Co., Ltd.

App Version

07:00

X.X.X.XXXXXXXXXX


Disconnect

Delete

Click

ImportantList of devices in Bluetooth record can't be deleted.

18

ClickClick

Click

Delete Android Device with Bluetooth Connection

19

USB Connection with Android Phone

ATID Reader

1 Put USB Cable to Phone USB Port. (See Mounting QUAD LOCK® & Smart Phone on page 7 - 8)

Ensure the ATID Application for Android is Installed the mobile. Installation SDK : http://www.atid1.com

ImportantEnsure the ATS100 USB Mode with VCP.(See setting USB on page14)

NoticeBefore trying to connect to the mobile, it must be enabled from Android Ver. 4.2 (Jelly Bean).To be recommended ver.6.0(Mashmallow) for activation.


20


ATID Reader

Atid Co., Ltd.

06:59

ATID Reader

Atid Co., Ltd.

06:59


4 Select "New Device"3 Select "YES" (Ensure the Bluetooth mode when pair to device)

Regist Device

Atid Co., Ltd.

06:59

Paired Devices

New Devices

Bluetooth USB

Regist Device

Atid Co., Ltd.

06:59

Bluetooth USB

New Devices

Enable connect an usb deviceautomatically

5 Select "USB" 6 Select "Scan Device"

Click

Click

Click

Application is requestingpermission to turn on BluetoothAllow?

NO YES

Click

21

ATID Reader

Atid Co., Ltd.

App Version

07:00

X.X.X.XXXXXXXXXX

UnknownATXXUSBSerial

Regist Device

Atid Co., Ltd.

06:59

New Devices

Enable connect an usb deviceautomatically

Bluetooth USB


ATID Reader

ATID Reader

Atid Co., Ltd.

App Version

07:00

X.X.X.XXXXXXXXXX


ATID Reader

Atid Co., Ltd.

App Version

07:00

X.X.X.XXXXXXXXXX


Connect

Enable Auto Connect

Delete

9 Select "Connect"

Click

Click

Click

Click

8 Press ( )7 Press the correct device on the New Devices list.

10 Press "OK" then It can be connect ATS100 with beep.

Use by default for this USB device

CANCLE OK

Allow the app ATID Reader toaccess the USB device?

22

ATID Reader

Atid Co., Ltd.

App Version

07:00

X.X.X.XXXXXXXXXX

ATXXXXXXXXXXX

Disconnect

Enable Auto Connect

Delete

ATS100

ATID Reader

Atid Co., Ltd.

App Version

07:00

X.X.X.XXXXXXXXXX

ATXXXXXXXXXXXATS100

Click

ATID Reader

Atid Co., Ltd.

App Version

07:00

X.X.X.XXXXXXXXXX

ATXXXXXXXXXXXATS100

Click

Click

ATID Reader

Atid Co., Ltd.

App Version

07:00

X.X.X.XXXXXXXXXX

ATXXXXXXXXXXX

Disconnect

Enable Auto Connect

Delete

ATS100

Click

USB disconnection with Android

2 Select "Disconnect" with beep


2 Select "Delete" row to be taken to the device connection.

Delete Android Device with USB Connection1 Select ( ) in the right hand side arrow.

23

Scanning RFID Tag : Android Phone

2 Select "RFID".1 Select guided arrow area. If you select You might have accidentally deleted Device in the list

ATID Reader

Atid Co., Ltd.

App Version

07:00

X.X.X.XXXXXXXXXX

ATXXXXXXXXXXXATS100

Click

Inventory

Tag/Total Count

07:00

RFID Barcode Key

0 0

Click

Ensure connection to Android device via Bluetooth or USB.

Inventory

Tag/Total Count

07:00

RFID Barcode Key

0 0

3 Select start or pull trigger. 4 Select "Stop" or release Trigger it will stop scanning Tag.

TriggerClick

24

Inventory

Tag/Total Count 65 3

07:01

RFID Barcode Key

XXXX 6XXXXXXXXXXXXXXXXXXXXXXXXXXXX

4

30

5

4

4

XXXXXXXXXXXXXXXXXXXXXXXXXXX





5 View list of scanned data.

25

Scanning Barcode : Android Phone

Inventory

Tag/Total Count

07:00

RFID Barcode Key

0 0

ATID Reader

Atid Co., Ltd.

App Version

07:00

X.X.X.XXXXXXXXXX

ATXXXXXXXXXXXATS100

Click

0 0

Inventory

Tag/Total Count

07:00

RFID Barcode Key

Click

Click

2 Select "Barcode".1 Select guided arrow area. If you select You might have accidentally deleted Device in the list

3 Select start or pull trigger.

Ensure connection to Android device via Bluetooth or USB.

Trigger

4 When the Barcode is within the scan range, the Barcode can be read.

26

Inventory

Tag/Total Count

07:01

RFID Barcode Key

XXXXXXXXXXXX 1AUPCA

1 1


27

1 Go to settings and Tap on the Bluetooth to be taken Bluetooth mode.

Bluetooth

오후 1:34

Bluetooth

98%

Click

Bluetooth Connection with iPhone

ImportantEnsure the ATS100 Bluetooth Mode with BLE.(See setting Bluetooth on page13)

Ensure the ATID Application for iPhone is installed in the mobile. Installation SDK : http://www.atid1.com

Settings

Location accuracy and nearby services are improved when Bluetooth is turned on

NoticeThe application will be applicable higher version of iOS 10.2.

ATID Reader


28

3 Press "New Device" to complete Bluetooth Connection

ATID Reader Demo

App Version XXXXXX.X

오후 1:35 98%

Click

4 Awaiting list on the device

Regist DeviceBack

98%

Paired Devices

New Devices

오후 1:35

Regist DeviceBack

98%

ATS100-XXXX

Paired Devices

New Devices

오후 1:35

Click

5 Press the right Device to be Connected with beep

29

Bluetooth disconnection with iPhone

2 When the buzzer sounds and the color of the changes to blue, the connection is released.

ATID Reader Demo

오후 1:35

App Version

98%

ATS100-XXXX

XXXXXX.X

Click

ATID Reader Demo

오후 1:36

App Version

98%

ATS100-XXXX

XXXXXX.X

Delete iPhone Device with Bluetooth Connection2 Click "OK".

ATID Reader Demo

오후 1:35

App Version

98%

ATS100-XXXX

XXXXXX.X

Click

ATID Reader Demo

App Version XXXXXX.X

오후 1:36 98%

DeleteDo you want to delete the selected

conntection?

Cancel OK

Click



30

Inventory

오후 1:36 98%

Inventory Barcode

Tag/Total Count 24/296

6

17

22

22

21

13

23

12XXXXXXXXXXXXXXXXXXXXXXXXXXXXX...

XXXXXXXXXXXXXXXXXXXXXXXXXXXX



XXXXXXXXXXXXXXXXXXXXXXXXXXXXX...




Scanning RFID Tag : iOSEnsure Connection to iOS Device via Bluetooth.

1 Click " ". 2 Select "Start" or pull Trigger.

Inventory

오후 1:36 98%

Inventory Barcode

Tag/Total Count 0/0 Click

3 Select "Stop" or release Trigger it will stop scanning Tag.

Trigger

4 View list of scanned data

Inventory

Inventory

오후 1:36 98%

Inventory Barcode

Tag/Total Count 0/0

Click

Trigger

31

Inventory

오후 1:37 98%

Inventory Barcode

Total Count 4

6

17

22

12UPC -AXXXXXXXXXXXXCode 39CODE 39UCC/ EAN -128XXXXXXXXXXXXXXXX

XXXXXXXXUPC -E

Scanning barcode : iOSEnsure Connection to iOS Device via Bluetooth.

1 Click " ". 2 Select "Start" or pull Trigger.


Inventory

오후 1:37 98%

Inventory Barcode

Tag/Total Count 0

Click

Inventory

오후 1:37 98%

Inventory Barcode

Total Count 0 Click

Barcode

3 When the Barcode is within the scan range, the Barcode can be read.

32

Ensure the ATID Demo Program for Windows is installed in the PC.Installation SDK : http://www.atid1.com

ImportantEnsure the ATS100 Bluetooth mode with SPP.(See setting Bluetooth on page13)

Windows 7

Start > Devices and Printers > Add deviceThe wireless devices will appear, accompany by relevant device information. Select ATS100-XXXX and Next.Following procedure can be paired device.( For Windows10 go to next page.)

Properties > Service : Remember Port name

Check

COM5

NoticeEnsure ".NET Framework 3.5" installed in the PC.

Bluetooth Connection with Windows

33

Start > Devices and Printers The wireless devices will appear, accompany by relevant device information. Select ATS100-XXXX and select Next.Following procedure can be paired device.

Properties > Service : Remember Port name

Windows 10

Check

COM5

Click

ATID Reader

2 Select ATS100 in product list

1 Launch Demo Program.

34

Click

Click

ImportantEnsure Port name, communication type, paring status and installation driver.

3 The selected Device will be the same Port name by properties.

4 Click "Connect" then the Device will be Connected with beep

35

Click "Disconnect" then the Device will be disconnected with beep

Click

Bluetooth disconnection with Windows

3636

Ensure the ATID Demo Program for Windows is installed in the PC.Installation SDK : http://www.atid1.com

ImportantEnsure the ATS100 USB mode with VCP.(See setting USB communication on page14)

1 Input USB connector to ATS100 2 Input USB connector to PC.

NoticeEnsure ".NET Framework 3.5" installed in the PC.

USB Connection with Windows

37

3 The selected device will be the same Port name by properties

ATID Reader

Check

Click

5 Select ATS100 in product list

4 Launch Demo Program.

38

Click

Click

ImportantEnsure Port name , Communication Type, paring status and installation driver.

Ensure USB driver for Windows is installed in the PC.Installation : www.atid1.com

6 The selected Device will be the same Port name by properties.

7 Click "Connect" then the Device will be Connected with beep

39

Click

Ensure Connection to Windows via Bluetooth or USB.

1 Ensure Operation mode is RFID.

Check

Click "Disconnect" then the device will be disconnected with beep

USB disconnection with Windows

Scanning RFID Tag : Windows

40

Check

2 If you don't want to detect Tag in continuous Mode, please deselect "Continuous".

3 Select "start" or pull trigger.

Click

41

4 Select stop or release Trigger will be stop scanning the Tag.

Trigger


42

Ensure connection to Windows via Bluetooth or USB.

1 Select guided arrow area in Operation Mode.

Click

2 Select "Start" or pull Trigger.

Click

Scanning Barcode : Windows

43

4 View list of scanned data

3 The Barcode will be scanned in range.

Trigger

44

Performance CharacteristicsProcessor ARM7 CorePhysical CharacteristicsDimensions (W x L x H)Weight

Standard I/O Port

76.1 x 173.7 x 139.8 mm (without QUAD LOCK®)420g (With Battery)

USB type-C, VCP, HIDPower Input DC 5V 2A

Data CaptureBarcodeRFID (UHF)

1D or 2D Imager Barcode Scanner

Audio Buzzer

Frequency

Reading range

902-928MHz (US) / 865-868MHz (EU)916-921MHz (Japan 1W LBT)916-923MHz (Japan 0.25W LBT)0M ~ 5M (According to Tag & Environment)

RF output 1W (MAX)Protocol GEN2, ISO / IEC 18000 - 6CWireless CommunicationBluetooth Bluetooth V4.1 Class 1 (HID, SPP, BLE)User EnvironmentOperating temperature -20°C to 60°CStorage temperatureHumidityDrop Specification

-30°C to 70°C95% non - condensing1.5M Drop to steel plate

Dust & Water Proof IP65Additional FeaturesNotification LED, Buzzer, VibratorCRADLE (OPTION)Standard Interface Charge Only (Option), USB Type-CGUN HANDLE (OPTION)Gun Handle Battery Lithium-Ion 3.7V 5,200mAH (Rechargeable)MOUNT (OPTION)Mount Type QUAD LOCK® Mount Type Mount Mechanism

ATS100 Specifications

45

For further information ATS100 please visit http://www.atid1.com

For SDK installation, please visit http://www.atid1.com

Atid Co., Ltd.’s products have warranty against defects in workmanship and materials for a period of 1yearAtid Co., Ltd. shall not be responsible for any damage to or loss of any Software programmes, data or removable data storage media, or the restoration or reinstallation of any Software programmes or data.

Warranty and Product service

This device complies with KC, FCC, CE and TELEC rules. However, changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Certificate

The contents of the User's Manual are subject to change without notice for the purpose of changing specifications or improving the product.

ATID CO.,Ltd.

Address : Byuksan Digital Valley-II #1211, 184 Gasan Digital 2-Ro, Gumcheon-Gu, Seoul, KOREA (Zip code: 08501)Tel : +82-2-544-1436Fax : +82-2-2113-0040Website : www.atid1.comE-mail : [email protected]

Details about ATS100

Download SDK

46

Memo

47

MemoPlease fill in the part of * before submission.

Perfo

rated lin

e

Product Warranty

- This product is manufactured through strict quality control and inspection. - If a malfunction occurs during normal use, you can get it repaired free of charge during the warranty period through your retailer or distributor. - Even if the warranty period expires or the warranty period is valid, the repair cost will be charged for the customer's fault (disassembly, modification, dropping, shock, damage, unreasonable operation, etc.). - In the event of a malfunction due to natural disasters (fire, salt damage, flood, etc.), repair costs will be charged. - If the consumable parts have reached the end of their useful life, the repair costs will be charged. - Please present warranty when requesting repair. - Warranty will not be reissued, please keep it carefully. - This warranty is only valid of purchase country.

Customer Name * Customer phone number *

Customer address *

Warranty Period Warranty Exclusions

1 YearAccessories other than body(But, the warranty period of the battery is 6 months based on the shipment date.)

Manufacturer Country of manufactureATID CO.,Ltd. KoreaProduct type Model nameBluetooth reader ATS100

Purchasing office * Purchase year *

Head Office:Address : Byuksan Digital Valley-II #1211,184 Gasan Digital 2-Ro, Gumcheon-Gu,Seoul, KOREA (Zip code: 08501)Tel : +82-2-544-1436Fax : +82-2-2113-0040Website : www.atid1.comE-mail : [email protected]

Overseas Sales:English : +82-70-8677-6454 +82-70-8677-8669 +82-70-8677-8576Japanese : +82-70-8677-8065

user guide - all that...

Documents