user instruction technical specification color beam …€¦ · user instruction technical...
TRANSCRIPT
USER INSTRUCTION COLOR BEAM 14 FCW IR
Thank you for purchasing this product.
Thank you for purchasing this product. For your own safety, please read this user manual
carefully before you initially start-up
8
TECHNICAL SPECIFICATIONPower supply : 100-240V AC, 47-63Hz
Current : 120V/60Hz 1.21A, 230V/50Hz 0.57A
Power Consumption : 90W Max
LED amont : 14X 5WX 4IN1
DMX Channel : 1, 2, 4 OR 8 Channel, DMX Mode 1/2/3/4
Weight : 4.0 Kg
Dimension : 252(L) X 201(W) X 270(H) mm
7
4. MACRO VALUE (0 : BLACK, 1-35 : 35 MACRO)
MACRO R G B W
00 0 0 0 0
01 0 0 128 0
02 0 0 192 0
03 0 0 255 0
04 0 128 0 0
05 0 128 128 0
06 0 128 192 0
07 0 128 255 0
08 0 255 0 0
09 0 255 128 0
10 0 255 255 0
11 0 255 255 0
12 128 0 0 0
13 128 0 128 0
14 128 0 192 0
15 128 0 255 0
16 128 128 0 0
17 128 128 128 0
18 128 128 192 0
19 128 128 255 0
20 128 255 0 0
21 128 255 128 0
22 128 255 192 0
23 128 255 255
24 255 0 0 0
25 255 0 128 0
26 255 0 192 0
27 255 0 255 0
28 255 128 0 0
29 255 128 128 0
30 255 128 192 0
31 255 128 0 0
32 255 255 0 0
33 255 255 128 0
34 255 255 192 0
35 255 255 255 255
2
USER INSTRUCTION – COLOR BEAM 14 FCW IR
SAFETY INSTRUCTIONSEvery person involved with the installation, operation and maintenance of this device has to : • • follow the instructions of this manual
• CAUTION ! Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric shock when touching the wires !
• This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual.
• Important : Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not accept liability for any resulting defects or problems.
• Keep away from heaters and other heating sources !
• on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
• Make sure that the power-cord is never crimped or damaged by sharp edges. Check the device and the power-cord from time to time.
•
• Shields, lenses or ultraviolet screens shall be changed if they have become visibly damaged to such an extent that their effectiveness is impaired, for example by cracks or deep scratches.
• Never let the power-cord come into contact with other cables ! Handle the power-cord and all connections with the mains with particular caution !
• Make sure that the available voltage is not higher than stated in this manual.• Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the
power-cord by the plug. Never pull out the plug by tugging the power-cord.• During the initial start-up some smoke or smell may arise. This is a normal process and does not
necessarily mean that the device is defective.• DANGER OF BURNING ! Never touch the device during the operation ! The housing heats up to the
housing temperature TSURFACE.• Don’t switch the device on and off in short intervals as this would reduce the lamp’s life.• HEALTH HAZARD ! Never look directly into the light source, as sensitive persons may suffer an epileptic
shock (especially meant for epileptics) !• Always disconnect from the mains, when the device is not in user or before cleaning it.•
• Keep away children and amateurs from the device !• There are no serviceable parts inside the device. Maintenance and service operations are only to be
carried out by authorized dealers.
OPERATING INSTRUCTIONS
1) This system has DMX Online mode and Stand-alone Mode. Online mode can link other units and be controlled by the DMX controller. And Stand-alone Mode has the functions of Sound, Auto Mixcolor and Strobe.
2) Master / Slave Setting : When Master Set on Mode 5 - Model 12 or IR Mode, The Slave set on Mode 1/2/3/4. When the Slave link on DMX Signal from Master, The Slave will auto change to Mode 3, If link off, The Slave will back to the last mode.
3) If a DMX signal is present under Online mode, the DMX LED will blink very fast to indicate. While under Master / Slave mode, Master’s LED indicator will light and Slave’s one will blink to indicate.
4) Display screen will turn off after 10 s. In this condition,pressing any keys is useless ; turning back when pressing any keys with 3 s. In OFF mode, IR’s function is not restrict, it runs usual, but screen is off.
5)
6) With any R/G/B/W output, the fan will on. W/O R/G/B/W output, after 3 s, the fan stops.
1. IR INSTRUCTIONBUTTON NAME FUNCTION DESCRIPTION
MODE Select your desire mode
UPDMX : select address ; run AUTO MODE.Adjust MODE speed ; MACRO : select color.
DOWNDMX : select address ; To run AUTO MODE. Adjust MODE speed ; MACRO : select color.
36
3. DMX FUNCTION
1 DMX mode 1 (1 CHS, Display : 1XXX; XXX= DMX address, press up/down change DMX address)
FIGURE 1 CH1(0-255) FUNCTION
DMX mode 1 Macro 35 color setting + black
2 DMX mode 2 (2 CHS, Display : 2XXX; XXX= DMX address, press up/down change DMX address)
FIGURE 2 CH1 (0-255) CH2 (0-255) FUNCTION
DMX mode 2 Macro luminance 35 color setting + luminance
3 DMX mode 3 (4 CHS, Display : 3XXX; XXX= DMX address, press up/down change DMX address)
CH1 (0-255) CH2 (0-255) CH3 (0-255) CH4 (0-255) FUNCTION
R G B W R/G/B/W luminace setting
4 DMX mode 4 8 CHS, Display: 4XXX; XXX= DMX address, press up/down change DMX address)
7 colorsaudio control(252-255)
NA NA NA
7 colors audio
control (252-255)
Dimmer 0 - 255 :
min - max
Light mode 7 colors audio control (252-255)
CH8 CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8
Mode R G B W MacroSpeed/Strobe
ModeMASTER
DIMFunction
(0-35)Adjustcolors
0 0 0 00-13(off) 0-15 :
static 16-255 :
16 different stobe
(0-35)Adjust colors
Dimmer 0 - 255 :
min - max
No out1-255 1-255 1-255 1-255
NA14-255 (macro)
RGB/ Strobe
35 color macro mode
(36-71)0-77 : OFF
8-255 JOIN IN
NA0 - 255 :
16 differentspeed
(36-71)
Dimmer 0 - 255 :
min - max
Light mode
(72-107) (72-107) Dim mode
(108-143) (108-143) Light & Dim mode
(144-179)
NA
(144-179) Auto mix color mode
(180-215) (180-215) 3 color strobe
(216-251) (216-251) 7 color strobe
5
IRC161 Remote control instruction
Setup Cancel OFF ON
Flash Strobe Fade
00 01 02
Smooth
03
D14
D13
D12
D11
04
07
10
13
05
08
11
14
06
09
12
15
NO. KEY DISPLAY & FUNCTION
1 Setup “IRSE”
2 Cancel EXIT IR
3 OFF “IRoF”
4 ON Back to last mode
5 Flash “IRFL”
6 Strobe “IRSt”
7 Fade “IRFA”
8 Smooth “IRSn”
9 DI1Macro mode Function mode
WhiteDimmer 0% Total dimmer 25%
10 DI2 WhiteDimmer 25% Total dimmer 50%
11 DI3 White Dimmer 50% Total dimmer 75%
12 DI4 White Dimmer 75% Total dimmer 100%
13 W White Dimmer100% “IR03”
14 R “IR00”
15 G “IR01”
16 B “IR02”
17 04 “IR04”
18 05 “IR05”
19 06 “IR06”
20 07 “IR07”
21 08 “IR08”
22 09 “IR09”
23 10 “IR10”
24 11 “IR11”
25 12 “IR12”
26 13 “IR13”
27 14 “IR14”
28 15 “IR15”
2. DISPLAY FUNCTION INSTRUCTIONSN0. MODE DISPLAY FUNCTION DESCRIPTION
1 DMX mode 1 (1CHS) 1XXX (XXX=001-512) Macro Mode
2 DMX mode 2 (2CHS) 2XXX (XXX=001-512) Macro mode (CH1) + adjust luminance (Ch2)
3 DMX mode 3 (3CHS) 3XXX (XXX=001-512) R(CH 1), G(CH2), B(CH3), W(CH4)
4 DMX mode4 (7CHS) 4XXX (XXX=001-512) DMX MODE
5 Manual Macro mode ncXX (XX=00-35) 35color+black, Macro value
6 RManual mode (static) rXXX (XX=00-255) R adjust luminance, 000-255
7 GManual mode (static) gXXX (XX=00-255) G adjust luminance, 000-255
8 B Manual mode (static) bXXX (XX=00-255) B adjust luminance, 000-255
9 W Manual mode (static) UXXX (XX=00-255) W adjust luminance, 000-255
10 Manual strobe setting St XX (XX=00-99) Adjust strobe speed, 00-99 : No-strobe-strobe fastest
11 Manual fade mixcolor mode Sh XX (XX=01-15) Adjust fade mix-color speed : 00 slowest,15fastest
12 7 color strobe FL XX (XX=01-15) Adjust 7 color strobe speed : 00 slowest,15fastest
13 Audio mode So 7 color sound control
14 Display screen
ds-1 Display screen permanent light
ds-2Display screen will turn off after 10 s. In this condition,pressing any keys is useless ; turning back after pressing keys 3 s.
4
IRC161 Remote control instruction
01) Setup : Input IR mode.
02) Cancel : Back to the last mode.
03) OFF : Fixture OFF.
04) ON : Fxin ON, and back to the last mode.
05) Flash : 7 color strobe + 8 steps adjust speed.
06) Strobe : Strobe + 8 steps adjust speed.(R/G/B/W 0:OFF,1-255 JOIN IN).
07) Fade : Fade + 8 steps adjust speed Color is decided by remote control (R/G/B/W 0:OFF,1-255 JOIN IN).
08) Smooth : Auto mix color + 8 steps adjust speed.
09) DI1~DI4 : Mix with other macro mode white value (0%, 25%, 50%, 75%, 100%) or total value rate for (Flash, Strob, Fade, Smooth) (25%, 50%, 75%,1 00%).
10) The rest keys show mix color mode .
11) The remote control had to be used < 5 metres from a Colorbeam 14 IR. The maximum remote control ray’s angle allowed is ± 30°.
12) When remote control demision short / can not work, maybe you need to change battery.
Setup Cancel OFF ON
Flash Strobe Fade
R G B
Smooth
W
D14
D13
D12
D11
COLOR BEAM 14 FCW IR
DMX OUT DMX INDDDDMMX X OOUUTT DDMMX X IINN
COLOR BEAM 14 FCW IR
DOWNMODE UP
MASTERDMX
15dr-X(X=2-5)
Ramp Mode
dr-1
The output light is with delay,dr-2the shortest time with delay
and dr-5 is the longest time with delay.
The output light is normal without delay