user manual boot mitsubishi · 2014-10-15 · fg technology 5/17 boot tricore manual cable...

FG Technology 1/17 BOOT TRICORE MANUAL

User Manual BOOT MITSUBISHI


Indice – Index

Premessa / Premise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Il modulo EOBD2 / The EOBD2 module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Attention: Cavo Mitsubishi / Mitsubishi cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Hyundai Kefico B47E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Mitsubishi EVO V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Mitsubishi EVO VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Mitsubishi E6T0x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Mitsubishi E6T424. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Mitsubishi E6T5xxx MAZDA/FORD Hw1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Mitsubishi E6T5xxx MAZDA/FORD Hw2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Mitsubishi E6T5xxx MAZDA/FORD Hw3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Mitsubishi E6T72xxx MITSUBISHI Lancer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Mitsubishi G2T60 SMART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Mitsubishi F8T604x1 Yamaha . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Mitsubishi F8T601xx Yamaha . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Mitsubishi F8T9997x Kawasaki . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Versione del manuale / Manual Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17


Premessa – Premise

IMPORTANTE – IMPORTANT

Il collegamento tra l’interfaccia EOBD e le ECU è molto semplice, tuttavia noi consigliamo

di seguire attentamente questo manuale perché ogni piccolo errore può danneggiare la

centralina.

The connection between the EOBD interface and the ECU is very simple, but we recommend to

follow this manual attentively because each small error could damage the ECU.


EOBD 2

Come prima cosa è indispensabile installare

nel vostro computer il software, seguendo le

istruzioni, presente nel CD di installazione.

As before thing is what is necessary install the

software in your computer, following the

instructions, present in the CD of installation.

Attenzione: Alimentare l’interfaccia utilizzando un

alimentatore a 12V, indifferentemente dal

tipo di centralina che si deve leggere. Il led

rosso si accenderà.

Attention:

It’s essential that the interface has fed using

a feeder to 12V always, without note of from

the type of ECU that must be read. The red

led will light.

Connettere il cavo con connettore DB15 alla

porta DB15 dell’interfaccia EOBD 2.

Figura 2.

Connect the cable with connector DB15 to the

DB15 door of EOBD 2 interface.

Figure 2

Figura 1: Il led rosso è acceso

The red led is light

Figura 2: Cavo DB15 connesso all’interfaccia

cable DB15 connect to the interface


Cable Mitsubishi

Per lavorare su ECU Mitsubishi è possibile

utilizzare il cavo per il Boot mode Tricore

dato in dotazione.

Se siete in possesso del tool versione fino al

2011, occorre però effettuare una modifica in

modo tale da poter sfruttare lo stesso cavo sia

per lavorare in Boot mode Tricore che con il

Boot Mitsubishi.

______________________________________

Modifica da effetturare:

Spostare il filo giallo dal Pin 14 al Pin 12 del

connettore DB15. ______________________________________

For working with Mitsubishi ECU you can use

the Boot Tricore Cable given in endowment.

If you have the tool versione until 2011, you

need to do a modify for using the same cable for

work with Boot mode Tricore and with Boot

Mitsubishi.

_______________________________________

What to do:

Move the yellow thread from Pin 14 to Pin 12

of DB15 connector. _______________________________________


Driver

Il driver da utilizzare per la lettura è / The driver to use for the reading is:

TOOL BOOT > TOOL BOOT MODE > MITSUBISHI BOOT > Select the correct driver

.


Mitsubishi Lancer EVO V - EVO VI - Mitsubishi E6T0x - Hyundai Kefico

↑


Mitsubishi E6T424

↑


Mitsubishi E6T5xxx MAZDA/FORD - HW1 ( ECU Big Version )

↑


Mitsubishi E6T5xxx MAZDA/FORD - HW2 ( ECU Small version ) *

↑


Mitsubishi E6T5xxx - MAZDA/FORD HW3

↑


Mitsubishi E6T72xxx - Mitsubishi Lancer

↑


Mitsubishi G2T60 - SMART

↑


Mitsubishi F8T604x1 - Yamaha FZR 1.8

↑

Mitsubishi F8T601xx - Yamaha

↑


Mitsubishi F8T9997x - Kawasaki Ultra 300x

↑


BOOT MITSUBISHI USER MANUAL

Manuale BOOT MITSUBISHI

Versione Marzo 2014

Version March 2014

↑

user manual boot mitsubishi · 2014-10-15 · fg technology 5/17 boot tricore manual cable...

Documents