user manual - stoned.audio · crystal clear audio without any wires 1. turn the earphones off. 2....
TRANSCRIPT
CRYSTAL CLEAR AUDIOWITHOUT ANY WIRES
User Manual
CRYSTAL CLEAR AUDIOWITHOUT ANY WIRES
Features
Specifications
Wireless stereo sound
Noise cancellation
Supports independent pairing
Play time of up to 5 hours
Standby time of up to 120 hours
Charging time of 1 hour
Built-in HD microphone
Bluetooth version: 4.2
Frequency: 2.4 Ghz
Wireless Range: 30 ft (~10m)
Receiver Sensitivity: -90 dBm
Battery Capacity: 65 mAh
Charging Cradle capacity: 1000 mAh
Supports CVC6.0 active noise cancellation
Supports A2DP1.3/HFP1.2/AVRCP1.6/DI1.3
CRYSTAL CLEAR AUDIOWITHOUT ANY WIRES
Please wear the wireless earphones like this.
CRYSTAL CLEAR AUDIOWITHOUT ANY WIRES
1. Turn the earphones off.
2. Simultaneously press and hold the button on both earphones for 8 to 10
seconds.
3. The LEDs on the earphones will begin to flash red and blue.
4. When the earphones have paired with each other, the LEDs on both earphones
will flash blue once.
5. Release the buttons on each earphone.
The linking relationship is saved for future use; you should only need to do this once.
Any two Stoned Earphones may be linked to each other; if you have more than one
pair of Stoned Earphones, you may freely mix them.
Linking the Stoned Earphones to each other
1. Turn the earphones off.
2. Hold the button down on one earphone until you hear a “pairing” chime.
3. Hold the button down on the other earphone until you hear a “power on”
chime.
4. Open your Bluetooth settings and pair with the Stoned Earbuds.
5. Enjoy the music!
(The earbuds may also be paired with a laptop or any other Bluetooth-capable host.)
Pairing the Stoned Earphones to a phone
CRYSTAL CLEAR AUDIOWITHOUT ANY WIRES
Put the earphones in the charging case. While charging, you’ll see a red LED. When
charging has finished, you’ll see a blue LED.
The charging case may itself be charged by plugging it into a USB power source.
Charging
Pause:
Next song:
Answer call:
End call:
Reject call:
tap the center button once.
tap the center button twice.
tap the center button once.
tap the center button once.
tap the center button twice.
The Button
1. Press the button on one earphone for 3 seconds until you hear a “power off”
chime.
Powering off the Stoned Earphones
CRYSTAL CLEAR AUDIOWITHOUT ANY WIRES
1. Don’t throw Stoned Earphones in the trash. The Stoned Earphones contain
lithium-ion polymer batteries, and must be disposed of at an an appropriate
facility.
2. Don’t subject the Stoned Earphones to excessive physical stress.
3. Don’t submerse the Stoned Earphones in water—the Stoned Earphones are not
waterproof.
Don’t do this