user manual - machine tapping...• remove the plug on the top of the lubricator and fill with high...
TRANSCRIPT
![Page 1: User Manual - Machine Tapping...• Remove the plug on the top of the lubricator and fill with high grade pneumatic oil (DIN51524 or ISO VG32). Do not fill above the maximum line and](https://reader033.vdocument.in/reader033/viewer/2022041520/5e2df1e448cd8a3248453df0/html5/thumbnails/1.jpg)
www.machine-tapping.co.uk - Images & Content © Allendale Group Ltd. www.machine-tapping.co.uk - Images & Content ©2017 Allendale Group Ltd.
User ManualTA-3-12, TA-3-12-ANSI
V1.4
![Page 2: User Manual - Machine Tapping...• Remove the plug on the top of the lubricator and fill with high grade pneumatic oil (DIN51524 or ISO VG32). Do not fill above the maximum line and](https://reader033.vdocument.in/reader033/viewer/2022041520/5e2df1e448cd8a3248453df0/html5/thumbnails/2.jpg)
![Page 3: User Manual - Machine Tapping...• Remove the plug on the top of the lubricator and fill with high grade pneumatic oil (DIN51524 or ISO VG32). Do not fill above the maximum line and](https://reader033.vdocument.in/reader033/viewer/2022041520/5e2df1e448cd8a3248453df0/html5/thumbnails/3.jpg)
www.machine-tapping.co.uk - Images & Content © Allendale Group Ltd.
User Manual
3
Introduction
Assembly
• Mountthemachinebasetoasuitableflatworkingtable,securewiththefourM8boltssupplied.(pleaseseedimensiondiagram)
• Ensurethemountingbasepivotisclean.• Locatetheradialarmtothemountingbase.• Ensurethetopradialpivotiscleanandapplyasmallamountofgrease.
• Locateandslidetheradialarmpivotontothepantographicarm
• Ensurethemotorclampandpneumaticmotorareclean.Slotthemotorintotheclampandtighten(donotovertighten)
M8 x 1.25
∅60
![Page 4: User Manual - Machine Tapping...• Remove the plug on the top of the lubricator and fill with high grade pneumatic oil (DIN51524 or ISO VG32). Do not fill above the maximum line and](https://reader033.vdocument.in/reader033/viewer/2022041520/5e2df1e448cd8a3248453df0/html5/thumbnails/4.jpg)
User Manual
www.machine-tapping.co.uk - Images & Content © Allendale Group Ltd.4
Thepneumaticmotorcanbesetatanyanglebetweentheverticalandhorizontalposition.Themotorhasalocatingpegfortheverticalpositionandissecuredbyathreadedlockinghandle.
Toadjusttheanglesimplyloosenthelockinghandle,swiveltodesiredangleandtightenlockinghandle.
Setting the Angle of the Motor
Operating the Pneumatic Motor
Thepneumaticmotorhasalargefingeroperatedpaddletriggerandthumboperatedreversebutton.Pullthetriggertostartforwardrotation,holdbothpaddletriggerandreversebuttonforreverserotation.
![Page 5: User Manual - Machine Tapping...• Remove the plug on the top of the lubricator and fill with high grade pneumatic oil (DIN51524 or ISO VG32). Do not fill above the maximum line and](https://reader033.vdocument.in/reader033/viewer/2022041520/5e2df1e448cd8a3248453df0/html5/thumbnails/5.jpg)
www.machine-tapping.co.uk - Images & Content © Allendale Group Ltd.
User Manual
5
Air Supply and Lubrication
Regulator & Lubricator Installation
Setting Lubricator Oil Feed
• Fitthemountingbrackettotheregulator.Attachtheregulatortothearmusingthetwofixingbolts.• FitthegaugewithPTFEandtightenbyhand.(donotovertighten)• Screwtheairfittingsintothelubricatoranduse10mmflexibleairhosetoconnecttothemotor.• Removetheplugonthetopofthelubricatorandfillwithhighgradepneumaticoil(DIN51524orISOVG32).Donotfillabovethemaximumlineandrefittheplug.
• Fitmainairfeedtotheregulator.
Adjusting Air Pressure
Toadjustairpressure,pulltheregulatorknobupwards.Turntheknobclockwisetoincreasethepressureandturntheknobanti-clockwisetodecreasethepressure.
Normaloperatingpressureforthepneumaticmotorisbetween6.5-8BAR.
Any water/moisture collected by the regulator bowl must be drained regularly.
Thelubricatorinjectsamistofoilintotheairlinetolubricatethepneumaticmotor.Theamountofoilin-jectediscontrolledbyanadjustmentscrewlocatedontopofthesightglass.
Withtheairsupplyonandthemotoroperatingthescrewshouldbeadjustedsothat3to5dropsofoilcanbeseenevery60secondsthroughthelubricatorsightglass.
Fillwithhighgradepneumaticoil(DIN51524orISOVG32).Donotfillabovethemaximumlineandrefittheplug.
The lubricator must be set up correctly, with suitable oil and oil level maintained, otherwise per-manent damage to the pneumatic motor will occur.
![Page 6: User Manual - Machine Tapping...• Remove the plug on the top of the lubricator and fill with high grade pneumatic oil (DIN51524 or ISO VG32). Do not fill above the maximum line and](https://reader033.vdocument.in/reader033/viewer/2022041520/5e2df1e448cd8a3248453df0/html5/thumbnails/6.jpg)
User Manual
www.machine-tapping.co.uk - Images & Content © Allendale Group Ltd.6
TA-3-12
Tap Size D1-TapShankDiameter
TapSquareSize-(acrossflats)
ISOorBSStandardRequired
M3 3.15mm 2.5mm ISO529M4 4mm 3.15mm ISO529M5 5mm 4mm ISO529M6 6.3mm 5mm ISO529M8* 6.3mm 5mm ISO2283BS949M10* 8mm 6.3mm ISO2283BS949M12* 9mm 7.1mm ISO2283BS949
*RequirelongshankmachinetapsTA-3-12-ANSI
Thread Standard Dia. Square1/8.(#0-6) ANSI 0.141 0.1105/32.(#8) ANSI 0.168 0.1313/16.(#10) ANSI 0.194 0.152
1/4. ANSI 0.255 0.1915/16. ANSI 0.318 0.2383/8. ANSI 0.381 0.2867/16. ANSI 0.323 0.2421/2. ANSI 0.367 0.275
*Requirelongshankmachinetaps
![Page 7: User Manual - Machine Tapping...• Remove the plug on the top of the lubricator and fill with high grade pneumatic oil (DIN51524 or ISO VG32). Do not fill above the maximum line and](https://reader033.vdocument.in/reader033/viewer/2022041520/5e2df1e448cd8a3248453df0/html5/thumbnails/7.jpg)
www.machine-tapping.co.uk - Images & Content © Allendale Group Ltd.
User Manual
7
Torque Settings of Ratchet Collets (factory set)
Collet Size M3 M4 M5 M6 M8 M10 M12
Clutch Torque (nm)
0.54 1.1 2.3 4.2 8.5 15 25
Inserting a Machine Tap into Collet
Pressthelockingbuttononthefrontofthecollet
Insertmachinetapandlocatethesquareofthetapwiththesquareattherearofthecollet
Releasethelockingbutton
Step 1; Step 2;
Step 4; Step 3;
Torque Settings of ANSI (factory set)
Collet Size 1/8 5/32 3/16 1/4. 5/16. 3/8. 7/16. 1/2.
Clutch Torque (nm)
0.786 1.573 2.983 5.884 9.802 15.700 21.571 31.387
![Page 8: User Manual - Machine Tapping...• Remove the plug on the top of the lubricator and fill with high grade pneumatic oil (DIN51524 or ISO VG32). Do not fill above the maximum line and](https://reader033.vdocument.in/reader033/viewer/2022041520/5e2df1e448cd8a3248453df0/html5/thumbnails/8.jpg)
User Manual
www.machine-tapping.co.uk - Images & Content © Allendale Group Ltd.8
Inserting a Collet into the Chuck
Lifttheblackknurledlockingringonthechuck.
Alignthetwodrivepegs. Releasetheblackknurledlockingringonthechuck
Step 1; Step 2;
Step 4; Step 3;
Locatethecolletwiththechuck.
![Page 9: User Manual - Machine Tapping...• Remove the plug on the top of the lubricator and fill with high grade pneumatic oil (DIN51524 or ISO VG32). Do not fill above the maximum line and](https://reader033.vdocument.in/reader033/viewer/2022041520/5e2df1e448cd8a3248453df0/html5/thumbnails/9.jpg)
www.machine-tapping.co.uk - Images & Content © Allendale Group Ltd.
User Manual
9
Removing a Collet from the Chuck
Gripthecolletandknurledlockingring.
Thecolletcanberemoved.
Step 1; Step 2;
Step 4; Step 3;
Liftblackknurledlockingringonthechuck
![Page 10: User Manual - Machine Tapping...• Remove the plug on the top of the lubricator and fill with high grade pneumatic oil (DIN51524 or ISO VG32). Do not fill above the maximum line and](https://reader033.vdocument.in/reader033/viewer/2022041520/5e2df1e448cd8a3248453df0/html5/thumbnails/10.jpg)
User Manual
www.machine-tapping.co.uk - Images & Content © Allendale Group Ltd.10
Maintenance
Thelubricatormustbesetupcorrectly,withsuitableoilandlevelmaintained,otherwisepermanentdamagetothepneumaticmotorwilloccur.
Anywater/moisturecollectedbytheregulatorbowlmustbedrainedregularly.
Thepneumaticmotoronthepantographicarmhasasealedgasstrutcounterbalance,whichcannotbeadjusted.
![Page 11: User Manual - Machine Tapping...• Remove the plug on the top of the lubricator and fill with high grade pneumatic oil (DIN51524 or ISO VG32). Do not fill above the maximum line and](https://reader033.vdocument.in/reader033/viewer/2022041520/5e2df1e448cd8a3248453df0/html5/thumbnails/11.jpg)
www.machine-tapping.co.uk - Images & Content © Allendale Group Ltd.
User Manual
11
![Page 12: User Manual - Machine Tapping...• Remove the plug on the top of the lubricator and fill with high grade pneumatic oil (DIN51524 or ISO VG32). Do not fill above the maximum line and](https://reader033.vdocument.in/reader033/viewer/2022041520/5e2df1e448cd8a3248453df0/html5/thumbnails/12.jpg)
www.machine-tapping.co.uk - Images & Content © Allendale Group Ltd.
Allendale Group Ltd.Machine Tapping Dept.
Pindar RoadHoddesdon
HertfordshireEN11 0BZ
www.machine-tapping.co.uk
Contact Details