user manual of interactive projection system · interactive floor vdo id 2.4.1 insert cd disk...

ssidisplays.com (888) 631-5880 | 269 Technology Way, Suite 1, Rocklin, CA, 95765

Interactive FloorVendor Guide

User Manual of Interactive Projection SystemInstallation method of floor positive projection:

http://ssidisplays.com

http://www.ssidisplays.com



Quick Start1.1 System Requirements

1) Projector (prepared by client)

We generally recommend 3000 lumens projector. Of course according to interior

situation, we can choose a low dark lumen projector. If the surrounding light is too

strong we then need for higher lumen projector.

2) Computer (prepared by client)

We generally recommend dual-core processor in the mainframe computer, it deals with

faster image analysis and provides support.

TipWe recommend high-end graphics cards in Nvidia series in order to make full use of the Directx 3D

acceleration function.

If we need to save cost, we do not need a liquid crystal display. We can directly transfer output to the

projector.

The following is a recommended configuration:CPU Memory Hard Drive GPU PeripheralsIntel Core 2 Duo

E8200 or higher

2G 160G Nvidia 7900GS 3D Keyboard and

mouse





3) Basic components of the interactive system

USB IR Video capture: Capture visitor’s motion

Video Cable: USB extension cable for USB IR Video Capture

Interactive Floor/Wall Software





2. Quick InstallationInteractive system is consisted of hardware and software. It can be used both on floors and

walls. The hardware installation is easy and flexible. Please follow the instructions to install it:

There are two structure models of Interactive Wall, the video capture can be installed at the same side with projector as Model 1, or it can be installed at the opposite side of the projector as Model 2.* LCD/LED/Plasma/TV screen also can be used as the display of the Interactive wall.

1. IR Camera2. Projector3. Computer4. Audience5. Interactive area of IR Camera6. Interactive area of Projector image7. Floor

1. IR Camera2. Projector3. Computer4. Audience5. Interactive area of IR Camera6. Interactive area of Projector image7. Wall

2.1 Structure of Interactive Floor

2.2 Structure of Interactive Wall

Model 1 Model 2





2.3 Structure of Interactive Floor

2.3 Connecting USB Video Capture to Computer

2.3.4 Connection Test

Before connection, the projector must be installed first. The projector needs to be hung on the ceiling, so it will be a long distance from the projector to the computer. 10m VGA cable will likely be required. The projector supplier can make the cable and install the projector for you.

Connect the USB video capture to your computer’s usb port and connect the 5 meter USB extension cable for the USB IR Video capture to run the system.Please note the USB IR Video capture don’t need a driver to be installed. It will work when you insert it to the USB port. *If you use your laptop to test the system, please disable your webcam in advance because the system can only detect one camera.

Start all the hardware including the projector, video capture and computer. Check the connections and make sure that they are all correct.

Connect projector and computer (Fig. 2.3.1-2.3.2):1. Connect projector (left) with computer (right) by VGA cable2. Start the projector3. Adjust parameter of projector to resize the projected image

VGA Cable on Projector VGA Cable on Computer





2.4.1 Insert CD Disk

2.4.1.1 Interactive system setting on windows 7.

2.4 Software Installation

Copy interactive software from CD to disk computer

Right click .exe file on our system folder and choose properties. Then click Compatibility button and choose run this progrmam as an administrator and apply it.





2.4.1.2

Menu Description:

Main Menu Options:

Please install setupAll.bat within tools folder after you copy files from CD Disk to your computer. Then run interactive.exe.

Click the shortcut to launch Interactive System 2.0.





3. Setting, Running, and Customizing3.1 SettingWe will define an interactive area. This step is very important. The interactive area should be the same as the projection image/projector’s resolution.To define interactive area:1. Click Settings on the menu bar.2. Click Config Video Capture to define the interactive area.See images below





3.1 Run the Effect

3.1 Customization of the effects

Sequence of confirming four points of interactive area (sensitiveness from 90 to 100, contrast from 3 to 10 value)

Click OK. All the motion of visitors in this red rectangle will be detected by video capture. To test the interactive area:

Click the green Run button to start it. You can set all the effects run automatically in advance from the ‘play’ menu.

Elements of effect can be replaced to meet client’s own requirement, supply the functions for you to edit the elements such as image, video, etc. It’s easy due to the flexibility to do.

Lotus effect settings:To customize effect1. Select the Lotus effect.2. Click Play on the menu bar.3. Click Effect setting to replace the elements of effect.

1. Put your hand into the interactive area to see if there is shadow of hand appear in the Mirror window.2. Check the connection of speaker, test sound.

* Press ESC hot key to exit from the running effect and go back to the main window of Schedule-Manger.* Press Alt + direction key ←, switch to the previous effect directly.* Press Alt + direction key →, switch to the next effect directly.





Follow these steps:

1. Background image setting: Click Change, open the new image with the format (*.jpg) and a minimum size of 1024x 768 pixels or bigger. The current image will be successfully replaced. If you select ‘Backup original image’ then it will save to a new folder under Lotus effect’s folder

2. Sound setting: Click Change, open the new sound with the format (*.mp3), The currentsound will be successfully replaced . If you select ‘Backup original sound then it will saveto a new folder under Lotus effect’s folder





3.4 Add your own flash or 3D effectTo add your own flash or 3D effect as .swf or .exe format:1. Click ‘Create new effect’ on the menu bar

2.Write an effect name in the textbox, it will create a new folder. Select .swf or .exe format effect file and press Create button.Please note that if there are some related files such as *.dll or *.lib or other data, you need to copy those files to the new folder you created.





3.5 Add new function to control the projector on/off automatically1. Connect Serial cable from projector to PC and add Serial port for projector, then clicktools manu as follow2. write power on/off code of your projector3. set baud rate, power on/off time.4. click apply button.5. Click close button





Thank you for your business,with any questions or concerns please do not hesitate to contact us.



user manual of interactive projection system · interactive floor vdo id 2.4.1 insert cd disk...

Documents