User Manual

VM-338A GPS DV

Tracking

1

&

CAR VIDEO RECORDER

2

Thanks for using GPS DV Device!

We reserves the rights of final interpretation of

the manual.

The product is subject to change without notice.

Please accept our apology for your inconvenience.

Please back up your information in the GPS

navigator. Our assumes no responsibility for any loss

caused by material loss.

The manual might contain a few mistakes

though it has been checked. If mistakes are found,

please contact the locus customer service center.

Main function

1. GPS navigation. Very smart, support 3D map

2. One key recording. Get into the recording mode

conveniently.

3. One key enter navigation. Get into the GPS

3

mode conveniently.

4. Support circulating recording. The video before

will be covered automatically.

5. Memo function. Support hand-writing.

6. Can record video while charging.

7. Video(HD film) can be played on this device.

Please read the instructions in this manual

and use only accessories to avoid unpredicted damage.

Failure to follow the instructions will invalidate

warranty and might endanger personnel safety, for

which YF assumes no responsibility.

Data of navigation electronic maps might

be inconsistent with actual traffic signals due to

transportation development. Please follow traffic

regulations and signs and drive according to road

4

situation. Operating the GPS navigator device while

driving might cause serious accidents. We assumes no

responsibility for accidents and loss due to improper

use.

For information of software update and

upgrade, please contact the dealer.

The pictures in the manual are subject to

the material object.

Chapter I Beginning Use

1.1 Appearance 6

paint of paint 7

1.2 Power Supply & Charging 9

1.3 Basic Use 13

1.4 System Main Interface and Major Functions 13

Chapter II

5

2.1 Map 14

2.2 Navigation 15

2.3 DV 15

2.4 Player 17

2.5 Setting 18

2.6Tool case 19

2.7 Time setting 19

2.8Navigation path 20

2.9game 21

Parameters 20

Accessories 21

Troubleshooting 22

Welcome

Thanks for using the GPS navigation and DVR. With

navigation as the major function,

6

it supports DVR, audio play, video play and so on.

You may use the GPS navigator anytime anywhere, for

example while driving, walking or cycling. Its

navigation and amusement functions will enrich your

life and work!

You may see the following supplemental information

in the manual.

Chapter I Beginning Use

This chapter introduces the appearance, components

7

and basic operations.

1.1 Appearance

The effect figure below is subject to the material

object.

8

TF card earphone mic USB2.0 battery

paint of paint

9

Camera Speaker

Note: for your navigation at the same time, can undertake DV the recording, the parameters of the record, in the map to your perfect display.

10

How to use ?First,need to set the screen size

11

Not full screen stateAnd then into DV interface

And then into DV interface

1.2 Power Supply & Charging

Charge the GPS navigator fully with the charger

before first using.

12

1.2.1 Power Supply

The GPS can be powered by the built-in battery or

external power supply.

When the GPS navigator is unconnected to the

charger, it is powered by the Li-polymer battery. When

the GPS navigator is connected to the charger, it is

powered by external power and the battery is charged.

[Attention] The GPS navigator adopts internal

removable Li-polymer battery. To avoid battery

rupture, explosion, release of hazardous substance or

burn, do not unpack, pierce, strike on or discard the

battery in fire or water.

1.2.2 Charging by Charger

The GPS navigator must be charged with the charger

before first use.

Plug the USB terminal of the charger into the USB

13

port on the left side of the GPS navigator and the other

to the power socket to supply power and charge the

GPS navigator.

[Note] Please charge the GPS navigator when the

battery is low or used up in succeeding use.

1.2.3 Charging by Car Charger

Plug one terminal of the car charger into the USB port

on the left side of the GPS navigator and the other to

the charging port to supply power and charge the GPS

navigator.

[Note] Plug in the car charger after the automobile is started to avoid damage due to current surge.

1.Powering on/off & Sleep

14

2.Powering on

Press the power key on the top of the GPS

navigator for at least two seconds to power it on.

3.Powering off & Sleep

Long press the power key to power off the GPS

navigator. The following interface will be prompted. If

short press the key to power, the device will entering

sleep mode at once, re-short press the key to power,

the device will come back the device will

automatically resume the state before entering sleep

mode when powered on again.

Or

15

1.3.1Restarting the System

When the system does not response, Long press(6

seconds) the power key to restart the system.

1.3.2Fixing the GPS Navigator with Mounting Kit

16

Standby

Restart

Shutdown

The mounting kit is composed of a back splint and a

bracket. To use the GPS navigator in an automobile,

fix it on the dashboard under the front windshield.

[Note] Do not place the GPS navigator in positions

obstructing the driver’s vision. Do not place it without

fixing it, or in the place of air bag or the area after the

air bag is inflated.

1.4 Major Functions

17

Long press the power key on the top of the device to

enter the system main interface.

Chapter II GPS

Various navigation mapping applications can be

installed in the GPS navigator, such as IGO,

TOMTOM intelligent navigation systems, which

position the navigator via the satellite receiver and

display it on the map. Set a destination, and the system

will automatically work out the best path to help the

user reach the destination safely and quickly.

18

2.1 MapDue to transportation development, inconformity

between products and real traffic information will

occur a period after product release. Please drive

according to road condition and abide by traffic

regulations.

2.2 Navigation

19

Navigation paths are for reference only, and the user

may decide whether to follow them.

2.3 DV

20

Video recording: Press the DV key directly

when on standby, boot the video mode. The

red LED on , means it is video standby

now. Press the DV button in the

screen, the green button become blue

, it is means recording. Please press the

button start ,Please press the button

if you want to stop video.

Take picture

If you want to take pictures, Please press the

21

button in the screen,the green button

become the blue ,You can begin

to take pictures. Press this button to take pictures.

2.4 PLAYER(MP3 OR FILM OR PICTURE)

This a media player which built-in this device. You

can view the video with this player.

22

2.5 SETTING

This section is for setting the time and the calibration

of the screen, backlight and so on.

23

:system information Brightness

Settings Touch screen calibration

Language setting Sound Settings

GPS path set

2.6 Tool case

24

View the calendar. Change the

date and time. Change the DV screen size.

calculator

2.7 Setting (Date& Time)

25

Please according to the prompt have set the date and

time. Please in is used for the first time, set up time.

Every time to put the battery, need to set a time again.

2.8Navigation Path

Insert the map data into the device and tap path mark to enter the setting progress. Used for the first

time, please first set up the path.

26

2.9GAME

Very important:

GPS receiving SPEC: COM1, baud rate 4800

27

The device spec:

Video Parameter :

Lens: 300 mega pixel color CMOS

Video: 1280x720

Frame rate: 25 – 30 fps

View angle: 70 degree or120 degree for option

LCD: 4:3 or 5.0 TFT display

Video format: MOV

Picture format: JEPG

Recording time: 2 hours

Recording and GPS navigation time: 2 hours

Micro SD card memory: 1 – 32 GB

USB: USB 2.0

Operation system: WINDOWS CE 6.0

Battery capacity: 900Mah

28

Charging time: about 4 hours

Charger: 5V 500 – 1500 Amm

GPS parameter

SDRAM 4G

Display resolution 480 x 272

Scan parameter COM1 9600

Map supported Support all WIN CE

Accessories

user manual, USB cable, stand , Car Charger

29

Chapter IX Troubleshooting

Please carry out the following operations in case of abnormal operation of the GPS navigator. For further problems, please contact our customer service center.

30

Fault Reason Solution

Startup failure

Low batterySupply external power and

charge the battery.

System downLong press(6

seceonds )power for restar.

Sudden power

cutLow battery

Supply external power and

charge the battery.

No/ vague

display

Low

backlightTurn up the backlight.

Backlight offTap the screen with the

touch pan.

Incorrect

tapping

response

Touch screen

not calibratedRecalibrate the screen.

No sounds Low volume Turn up the volume.

31

Communication

with PC

Poor USB

connectionConnect the USB cable.

GPS signals

reception

failure

Poor GPS

signal or can

not get GPS

info

About 3 minutes are needed

for low intensity of local

GPS satellite signal. Reset

the device. Resetting the

com and baud rate( com1

baud rate9600)

Loss of map

data

Accidental

deletion

Contact your agent or

distributor.

Input a new password after

recovering the GPS data.

NOTE: Please contact with the dealer if you have more question.

32