user’s guide guÍa del usuario - support | home | casio1: depende en el sonido * 2 = no relation *...

48
CTK710ES1A ES USER’S GUIDE GUÍA DEL USUARIO

Upload: others

Post on 26-Jan-2021

3 views

Category:

Documents


0 download

TRANSCRIPT

  • CTK710ES1A

    ES

    USER’S GUIDEGUÍA DEL USUARIO

    This recycle mark indicates that the packaging conforms to the environmental protection legislation in Germany.

    Esta marca de reciclaje indica que el empaquetado se ajusta a la legislación de protección ambiental en Alemania.

    MA0601-A Printed in China

    CTK710ES1A

    CASIO COMPUTER CO.,LTD.6-2, Hon-machi 1-chome

    Shibuya-ku, Tokyo 151-8543, JapanF

    CTK710_es_Cover1_4.p65 06.1.23, 11:24 AM1

  • Mod

    e 1

    : OM

    NI O

    N, P

    OLY

    Mod

    e 2

    : OM

    NI O

    N, M

    ON

    OO

    : Yes

    Mod

    e 3

    : OM

    NI O

    FF

    , PO

    LYM

    ode

    4 : O

    MN

    I OF

    F, M

    ON

    OX

    : No

    Fu

    nct

    ion

    ...

    Tra

    nsm

    itte

    dR

    eco

    gn

    ized

    Rem

    arks

    Bas

    icD

    efau

    ltC

    han

    nel

    Ch

    ang

    ed

    Def

    ault

    Mo

    de

    Mes

    sag

    esA

    lter

    ed

    No

    teN

    um

    ber

    Tru

    e vo

    ice

    Vel

    oci

    tyN

    ote

    ON

    No

    te O

    FF

    Aft

    erK

    ey’s

    To

    uch

    Ch

    ’s

    Pit

    ch B

    end

    er

    0, 3

    2 1C

    on

    tro

    l6,

    38

    Ch

    ang

    e7 10 11 64

    100,

    101 12

    012

    1

    Pro

    gra

    mC

    han

    ge

    :Tru

    e #

    Sys

    tem

    Exc

    lusi

    ve

    Sys

    tem

    : S

    on

    g P

    os

    Co

    mm

    on

    : S

    on

    g S

    el:

    Tu

    ne

    Sys

    tem

    : C

    lock

    Rea

    l Tim

    e:

    Co

    mm

    and

    s

    Au

    x:

    Lo

    cal O

    N/O

    FF

    : A

    ll n

    ote

    s O

    FF

    Mes

    sag

    es:

    Act

    ive

    Sen

    se:

    Res

    et

    Rem

    arks

    11-

    16

    Mod

    e 3

    X❊

    ❊❊

    ❊❊

    ❊❊

    ❊❊

    ❊❊

    ❊❊

    36-9

    6❊

    ❊❊

    ❊❊

    ❊❊

    ❊❊

    ❊❊

    ❊❊

    X 9

    nH V

    = 1

    00X

    9nH

    V =

    0

    X X X O X X X X X O X X X

    O 0

    -127

    ❊❊

    ❊❊

    ❊❊

    ❊❊

    ❊❊

    ❊❊

    ❊❊

    X X X X X X X X X X

    *1: D

    epen

    ds o

    n to

    ne*1

    : Dep

    ende

    en

    el s

    onid

    o

    *2 =

    no

    rela

    tion

    *2 =

    sin

    rel

    ació

    n

    Ban

    k se

    lect

    Mod

    ulat

    ion

    Dat

    a en

    try

    Vol

    ume

    Pan

    Exp

    ress

    ion

    Hol

    d1R

    PN

    LS

    B, M

    SB

    All

    soun

    d of

    fR

    eset

    all

    cont

    rolle

    r

    1-16

    1-16

    Mod

    e 3

    X❊

    ❊❊

    ❊❊

    ❊❊

    ❊❊

    ❊❊

    ❊❊

    0-12

    712

    -108

    *1

    O 9

    nH V

    = 1

    -127

    X 9

    nH V

    = 0

    ,8nH

    V =

    *2

    X X O O O O O O O O

    O

    *3

    O O

    O 0

    -127

    ❊❊

    ❊❊

    ❊❊

    ❊❊

    ❊❊

    ❊❊

    ❊❊

    O

    *4

    X X X X X X O X X

    *3F

    INE

    TU

    NE

    , CO

    AR

    SE

    TU

    NE

    rec

    eive

    , and

    PIT

    CH

    BE

    ND

    SE

    NS

    E, R

    PN

    Nul

    l rec

    eive

    .*3

    FIN

    E T

    UN

    E, r

    ecep

    ción

    CO

    AR

    SE

    TU

    NE

    , y P

    ITC

    H B

    EN

    D S

    EN

    SE

    , rec

    epci

    ón R

    PN

    Nul

    l.

    *4G

    M o

    n/of

    f G

    M O

    N :

    [F0]

    [7E

    ] [7F

    ] [09

    ] [01

    ] [F

    7]

    GM

    OF

    F :

    [F0]

    [7E

    ] [7F

    ] [09

    ] [02

    ] [F

    7]*4

    Act

    ivac

    ión/

    desa

    ctiv

    aci ó

    n G

    M

    GM

    ON

    : [F

    0] [7

    E] [

    7F] [

    09] [

    01] [

    F7]

    GM

    OF

    F: [

    F0]

    [7E

    ] [7F

    ] [09

    ] [02

    ] [F

    7]

    Ver

    sion

    : 1.0

    Mod

    el C

    TK

    -710

    MID

    I mes

    sag

    es t

    hat

    can

    be

    sen

    t an

    d r

    ecei

    ved

    usi

    ng

    th

    e U

    SB

    po

    rtLo

    s m

    ensa

    jes

    MID

    I pue

    den

    envi

    arse

    y r

    ecib

    irse

    usa

    ndo

    el p

    uert

    o U

    SB

    628A-E-087A628A-E-002A

    CASIO Europe GmbHBornbarch 10, 22848 Norderstedt, Germany

    This mark applies in EU countries only.

    GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THE UNIT IN THE U.S.A. (not applicable to other areas).

    NOTICEThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipment off and on, the useris encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.

    FCC WARNINGChanges or modifications not expressly approved by the party responsible for compliance could void the user’sauthority to operate the equipment.

    Important!Please note the following important information before using this product.

    • Before using the optional AD-5 Adaptor to power the unit, be sure to check the AC Adaptorfor any damage first. Carefully check the power cord for breakage, cuts, exposed wire andother serious damage. Never let children use an AC adaptor that is seriously damaged.

    • Never attempt to recharge batteries.• Do not use rechargeable batteries.• Never mix old batteries with new ones.• Use recommended batteries or equivalent types.• Always make sure that positive (+) and negative (–) poles are facing correctly as indicated

    near the battery compartment.• Replace batteries as soon as possible after any sign they are getting weak.• Do not short-circuit the battery terminals.• The product is not intended for children under 3 years.• Use only CASIO AD-5 adaptor.• The AC adaptor is not a toy.• Be sure to disconnect the AC adaptor before cleaning the product.

    Declaration of ConformityModel Number: CTK-710Trade Name: CASIO COMPUTER CO., LTD.Responsible party: CASIO, INC.Address: 570 MT. PLEASANT AVENUE, DOVER, NEW JERSEY 07801Telephone number: 973-361-5400This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation.

    CTK710_es_Cover1_4.p65 06.1.23, 11:24 AM2

  • E-1628A-E-003A

    Safety Precautions

    Congratulations on your selection of the CASIOelectronic musical instrument.• Before using the instrument, be sure to carefully

    read through the instructions contained in thismanual.

    • Be sure to keep all user documentation handy forfuture reference.

    SymbolsVarious symbols are used in this user’s guide and onthe product itself to ensure that the product is usedsafely and correctly, and to prevent injury to the userand other persons as well as damage to property.Those symbols along with their meanings are shownbelow.

    DANGERThis symbol indicates information that, if ignoredor applied incorrectly, creates the danger of deathor serious personal injury.

    WARNINGThis indication stipulates matters that have the riskof causing death or serious injury if the product isoperated incorrectly while ignoring this indication.

    CAUTIONThis indication stipulates matters that have the riskof causing injury as well as matters for which thereis the likelihood of occurrence of physical damageonly if the product is operated incorrectly whileignoring this indication.

    Symbol ExamplesThis triangle symbol ( ) means that theuser should be careful. (The example atleft indicates electrical shock caution.)

    This circle with a line through it ( )means that the indicated action must notbe performed. Indications within ornearby this symbol are specificallyprohibited. (The example at left indicatesthat disassembly is prohibited.)

    The black dot ( ) means that theindicated action must be performed.Indications within this symbol are actionsthat are specifically instructed to beperformed. (The example at left indicatesthat the power plug must be unpluggedfrom the electrical socket.)

    CTK710_e_01-07.p65 06.1.23, 11:23 AM1

  • E-2

    DANGER

    Alkaline BatteriesPerform the following steps immediately iffluid leaking from alkaline batteries evergets into your eyes.1. Do not rub your eyes! Rinse them with

    water.2. Contact your physician immediately.Leaving alkaline battery fluid in your eyescan lead to loss of sight.

    WARNING

    Smoke, Strange Odor, OverheatingContinued use of the product while it isemitting smoke, a strange odor, or heatcreates the risk of fire and electric shock.Take the following steps immediately.1. Turn off power.2. If you are using the AC adaptor for

    power, unplug it from the wall outlet.3. Contact your original retailer or an

    authorized CASIO Service Provider.

    AC Adaptor� Misuse of the AC adaptor creates the

    risk of fire and electric shock. Alwaysmake sure you observe the followingprecautions.• Be sure to use only the AC adaptor

    that is specified for this product.• Use only a power source whose

    voltage is within the rating marked onthe AC adaptor.

    • Do not overload electrical outlets andextension cords.

    � Misuse of the AC adaptor’s electric cordcan damage or break it, creating the riskof fire and electric shock. Always makesure you observe the followingprecautions.• Never place heavy objects on the cord

    or subject it to heat.• Never try to modify the cord or subject

    it to excessive bending.• Never twist or stretch the cord.• Should the electric cord or plug

    become damaged, contact youroriginal retailer or authorized CASIOService Provider.

    � Never touch the AC adaptor while yourhands are wet.Doing so creates the risk of electric shock.

    � Use the AC adaptor where it will not besplashed with water. Water creates therisk of fire and electric shock.

    � Do not place a vase or any other containerfilled with liquid on top of the ACadaptor. Water creates the risk of fireand electric shock.

    BatteriesMisuse of batteries can cause them to leak,resulting in damage to nearby objects, or toexplode, creating the risk of fire andpersonal injury. Always make sure youobserve the following precautions.• Never try to take batteries apart or allow

    them to become shorted.• Never expose batteries to heat or dispose

    of them by incineration.• Never mix old batteries with new ones.• Never mix batteries of different types.• Do not charge the batteries.• Make sure the positive (+) and negative

    (–) ends of the batteries are facingcorrectly.

    Do not incinerate the product.Never throw the product into fire.Doing so can cause it to explode, creatingthe risk of fire and personal injury.

    Water and Foreign MatterWater, other liquids, and foreign matter(such as pieces of metal) getting into theproduct create the risk of fire and electricshock. Take the following stepsimmediately.1. Turn off power.2. If you are using the AC adaptor for

    power, unplug it from the wall outlet.3. Contact your original retailer or an

    authorized CASIO Service Provider.

    Disassembly and ModificationNever try to take this product apart ormodify it in any way. Doing so creates therisk of electric shock, burn injury, or otherpersonal injury. Leave all internalinspection, adjustment, and maintenance upto your original retailer or authorizedCASIO Service Provider.

    Safety Precautions

    628A-E-004A

    CTK710_e_01-07.p65 06.1.23, 11:23 AM2

  • E-3

    Dropping and ImpactContinued use of this product after it hasbeen damaged by dropping or subjecting itto strong impact creates the risk of fire andelectric shock. Take the following stepsimmediately.1. Turn off power.2. If you are using the AC adaptor for

    power, unplug it from the wall outlet.3. Contact your original retailer or an

    authorized CASIO Service Provider.

    Plastic BagsNever place the plastic bag the productcomes in over your head or in your mouth.Doing so creates the risk of suffocation.Particular care concerning this precautionis required where small children arepresent.

    Keep off of the product and stand.*Climbing onto the product or stand cancause it to tip over or become damaged.Particular care concerning this precautionis required where small children arepresent.

    LocationAvoid locating the product on an unstablestand, on an uneven surface, or any otherunstable location. An unstable location cancause the product to fall over, creating therisk of personal injury.

    CAUTION

    AC Adaptor� Misuse of the AC adaptor creates the

    risk of fire and electric shock. Alwaysmake sure you observe the followingprecautions.• Do not locate the electric cord near a

    stove or other sources of heat.• Never pull on the cord when

    unplugging from the electrical outlet.Always grasp the AC adaptor whenunplugging.

    � Misuse of the AC adaptor creates therisk of fire and electric shock. Alwaysmake sure you observe the followingprecautions.• Insert the AC adaptor into the wall

    outlet as far as it will go.• Unplug the AC adaptor from the wall

    outlet during lightening storms orbefore leaving on a trip or other long-term absence.

    • At least once a year, unplug the ACadaptor from the wall outlet and wipeaway any dust that is built up in thearea around the prongs of the plug.

    Relocating the ProductBefore relocating the product, alwaysunplug the AC adaptor from the wall outletand disconnect all other cables andconnecting cords. Leaving cords connectedcreates the risk of damage to the cords, fire,and electric shock.

    CleaningBefore cleaning the product, always unplugthe AC adaptor from the wall outlet first.Leaving the AC adaptor plugged in createsthe risk of damage to the AC adaptor, fire,and electric shock.

    BatteriesMisuse of batteries can cause them to leakresulting in damage to nearby objects, or toexplode, creating the risk of fire andpersonal injury. Always make sure youobserve the following precautions.• Use only batteries that are specified for

    use with this product.• Remove batteries from the product if you

    do not plan to use it for a long time.

    Safety Precautions

    628A-E-005A

    CTK710_e_01-07.p65 06.1.23, 11:23 AM3

  • E-4

    ConnectorsConnect only the specified devices andequipment to the product’s connectors.Connection of a non-specified device orequipment creates the risk of fire andelectric shock.

    LocationAvoid the following locations for thisproduct. Such locations create the risk offire and electric shock.• Areas subject to high humidity or large

    amounts of dust.• In food preparation areas or other areas

    subject to oil smoke.• Near air conditioning equipment, on a

    heated carpet, in areas exposed to directsunlight, inside of a vehicle parked inthe sun, or any other area that subjectsthe product to high temperatures.

    Display Screen• Never push on the display screen’s LCD

    panel or subject it to strong impact. Doingso can cause the LCD panel’s glass tocrack, creating the risk of personal injury.

    • Should the LCD panel ever crack orbreak, never touch the liquid inside ofthe panel. LCD panel liquid can causeskin irritation.

    • Should LCD panel liquid ever get insideyour mouth, immediately wash out yourmouth with water and contact yourphysician.

    • Should LCD panel liquid ever get intoyour eyes or onto your skin, rinse withclear water for at least 15 minutes, andthen contact a physician.

    Sound VolumeDo not listen to music at very loud volumesfor long periods. Particular care concerningthis precaution is required when usingheadphones. High volume settings candamage your hearing.

    Heavy ObjectsNever place heavy object on top of theproduct.Doing so can make the product top heavy,causing the product to tip over or the objectto fall from it, creating the risk of personalinjury.

    Safety Precautions

    628A-E-006A

    Correct Stand* AssemblyAn incorrectly assembled stand can tip over,causing the product to fall and creating therisk of personal injury.Make sure you assemble the stand correctly,following the assembly instructions thatcome with it. Make sure you mount theproduct on the stand correctly.

    * Stand is available as an option.

    IMPORTANT!When using batteries, be sure to replace them or shift toone of the alternate power sources whenever you noticeany of the following symptoms.

    • Dim power supply indicator• Instrument does not turn on.• Dim, difficult to read display• Abnormally low speaker/headphone volume• Distortion of sound output• Occasional interruption of sound when playing at high

    volumes• Sudden power failure when playing at high volumes• Dimming of the display when playing at high volume• Continued sound output even after you release a key• A totally different tone may sound• Abnormal rhythm pattern and demo tune play• Abnormally low microphone volume• Distortion of microphone input• Dim power supply indicator when a microphone is used• Sudden power failure when using the microphone

    Company and product names used in thismanual may be registered trademarks ofothers.

    CTK710_e_01-07.p65 06.1.23, 11:23 AM4

  • E-5

    Congratulations upon your selection of this CASIO musicalinstrument. This keyboard provides you with the followingfeatures and functions.

    ❐ 242 tonesChoose from among orchestral sounds, synthesizedsounds, and more.

    ❐ 100 rhythms100 versatile rhythms help to add plenty of life to all yourkeyboard performances.

    ❐ Auto AccompanimentSimply play a chord and the corresponding rhythm, bassand chord parts play automatically.

    ❐ PIANO BANK buttonThe touch of a button takes you directly to piano tonesand piano lessons.

    ❐ 3-Step Lesson SystemThe 3-Step Lesson System lets you practice at your ownpace. The keyboard automatically grades yourperformances, so you can trace your progress as youimprove.• 3-Step Lesson System: Now you can learn the parts

    that make up the keyboard’s built-in tunes. Guidancethat appears on the monitor screen helps lead you downthe path to music proficiency.

    • Evaluation System: The keyboard can be configured torate your performances during Step 3 lesson byassigning points.

    ❐ 100 built-in tunes, including piano piecesBuilt-in tunes are divided into two groups: a Song Bankof 50 tunes with Auto Accompaniment, and a Piano Bankof 50 piano tunes.

    ❐ Musical Information SystemA big LCD screen graphically shows you fingerings,keyboard keys to be pressed, and notes, making keyboardplay more informative and enjoyable than ever before.

    Introduction

    628A-E-007A

    Avoid heat, humidity or direct sunlight.Do not overexpose the instrument to direct sunlight, or placeit near an air conditioner, or in any extremely hot place.

    Do not use near a TV or radio.This instrument can cause video or audio interference withTV and radio reception. If this happens, move the instrumentaway from the TV or radio.

    Do not use lacquer, thinner or similarchemicals for cleaning.Clean the keyboard with a soft cloth dampened in a weaksolution of water and a neutral detergent. Soak the cloth inthe solution and squeeze until it is almost dry.

    Avoid use in areas subjected to temperatureextremes.Extreme heat can cause figures on the LCD screen to becomedim and difficult to read. This condition should correct itselfwhen the keyboard is brought back to normal temperature.

    NOTE• You may notice lines in the finish of the case of this

    keyboard. These lines are a result of the molding processused to shape the plastic of the case. They are not cracksor breaks in the plastic, and are no cause for concern.

    Care of yourkeyboard

    CTK710_e_01-07.p65 06.1.23, 11:23 AM5

  • E-6 628A-E-008A

    Contents

    Safety Precautions ................ E-1

    Introduction ........................... E-5

    Care of your keyboard .......... E-5

    General Guide........................ E-8

    Attachment of the Score Stand ................ E-9

    Quick Reference .................. E-10

    To play the keyboard .............................. E-10

    Power Supply ...................... E-12

    Using batteries ....................................... E-12

    Using the AC Adaptor ............................. E-13

    Auto Power Off ....................................... E-13

    Settings .................................................. E-13

    Connections ........................ E-14

    Phones/Output Terminal......................... E-14

    Connecting to a Computer or

    Other Equipment .................................... E-14

    Sustain jack Terminal ............................. E-14

    Microphone Jack .................................... E-14

    Accessories and Options ....................... E-14

    Basic Operations................. E-15

    Playing the Keyboard ............................. E-15

    Selecting a Tone..................................... E-15

    Using the Microphone Jack .................... E-16

    Auto Accompaniment ......... E-17

    Selecting a Rhythm ................................ E-17

    Playing a Rhythm ................................... E-17

    Adjusting the Tempo............................... E-18

    Using Auto Accompaniment ................... E-18

    Using a Fill-in Pattern ............................. E-20

    Synchro Starting Accompaniment with

    Rhythm Play ........................................... E-20

    Playing a Built-in Tune........ E-21

    To play back a Song Bank tune ............. E-21

    To play back a Piano Bank tune ............. E-22

    Adjusting the Tempo............................... E-22

    To change the melody tone .................... E-23

    To play all tunes in succession ............... E-23

    Using the PIANO BANK Button ............. E-23

    3-Step Lesson...................... E-24

    Evaluation Mode .................................... E-25

    Using the Lesson Functions and

    Evaluation Mode .................................... E-25

    Step 1 – Master the timing. .................... E-25

    Step 2 – Master the notes. ..................... E-26

    Step 3 – Play at normal speed. .............. E-26

    Voice Fingering Guide ............................ E-27

    CTK710_e_01-07.p65 06.1.23, 11:23 AM6

  • E-7

    Contents

    Keyboard Settings .............. E-28

    Adjusting Accompaniment and

    Song Bank Volume ................................ E-28

    Transposing the Keyboard ..................... E-28

    Tuning the Keyboard .............................. E-29

    Connection to a Computer ....E-30

    Connecting to a Computer ..................... E-30

    General MIDI Tone ................................. E-31

    Changing the Settings ............................ E-31

    Troubleshooting .................. E-33

    Specifications ...................... E-34

    Appendix ................................ A-1

    Tone List ................................................... A-1

    Percussion Instrument List ....................... A-5

    Fingered Chord Chart .............................. A-6

    Rhythm List .............................................. A-8

    Song List .................................................. A-9

    MIDI messages that can be sentand received using the USB port

    628A-E-009A

    CTK710_e_01-07.p65 06.1.23, 11:23 AM7

  • E-8 628A-E-010A

    B

    H

    BA0 C D F G*E

    ONL MK

    1 2

    5 6 7 98

    3 4

    I J

    P Q R US T

    General Guide

    CTK710_e_08-16.p65 06.1.23, 11:23 AM8

  • E-9

    General Guide

    1 MIC VOLUME slider2 Power indicator3 POWER/MODE switch4 MAIN VOLUME slider

    � SONG BANK/PIANO BANK/RHYTHM CONTROLLER5 FILL-IN button6 SYNCHRO button7 START/STOP button

    8 TEMPO buttons9 SETTING button0 Percussion instrument listA CHORD root namesB SpeakerC Rhythm listD Tone listE DisplayF Song Bank listG Piano Bank list

    628A-E-011A

    Rear Panel

    H COUNT VOICE 1 to 5I [+]/[–] buttons

    • Negative values can be changed only by using [+] and[–] to increase and decrease the displayed value.

    J Number buttons• For input of numbers to change displayed settings.

    K TONE buttonL RHYTHM buttonM SONG BANK buttonN PIANO BANK button

    � 3-STEP LESSONO STEP 1 buttonP STEP 2 buttonQ STEP 3 buttonR SCORING buttonS LEFT buttonT RIGHT buttonU SPEAK button

    WV X Y Z

    V USB port W SUSTAIN jack terminalX DC 9V terminalY PHONES/OUTPUT terminal

    NOTE• Display examples shown in this User’s Guide are intended for illustrative purposes only. The actual text and values that

    appear on the display may differ from the examples shown in this User’s Guide.• Viewing a liquid crystal display screen from an angle can change the appearance of display contrast. The display contrast of

    this keyboard is set to allow easy viewing for a person seated on a chair in front of the keyboard. Note that display contrastis fixed, and cannot be adjusted.

    Z MIC IN jack

    *Attachment of the Score StandInsert both ends of the music stand provided with thekeyboard into the two holes on the top surface.

    CTK710_e_08-16.p65 06.1.23, 11:23 AM9

  • E-10

    Quick Reference

    This section provides a quick overview of keyboard operationusing steps one and two of the 3-step lesson feature.With the 3-step lesson feature, the on-screen keyboard guidekeys light to show the next note of the tune.

    To play the keyboard

    1 Set the POWER/MODE switch to NORMAL.• This causes the power indicator to light.

    2 Press the SONG BANK button.

    3 Find the tune you want to play in the SONG BANKList, and then use the number buttons to input itstwo-digit number.• See page A-9 for the SONG BANK List.Example: To select “40 ALOHA OE”, input 4 and then 0.

    4 Press the STEP 1 button or STEP 2 button.• The keyboard sounds a count beat and waits for you

    to play something on the keyboard. The keys that youneed to press first flash on the display.

    5 Play the melody along with the selected tune’saccompaniment.• Play in accordance with the keyboard keys, fingerings

    and notes that appear on the display.

    If you selected lesson Step 1• Play the notes on the keyboard.• Accompaniment (left-hand part) plays in time with

    the notes.• With Step 1, the correct melody note is played no

    matter which keyboard key you press.

    If you selected lesson Step 2• Play the correct notes on the keyboard.• While an on-screen keyboard guide key is lit, press

    the corresponding key on the actual keyboard. In thecase of a Piano Bank tune, the keyboard guideindication turns off when you press a keyboard key,and the on-screen keyboard guide key lights for thenext note to be played.

    • Accompaniment (left-hand part) plays in time withthe notes, as long as you press the correct keyboardkeys.

    628A-E-012A

    START/STOP PIANO BANK STEP 1

    STEP 2

    POWER/MODEPower indicator Number buttonsSONG BANK

    Indicatorappears

    A l o h a O e

    A l o h a O e

    FingeringKeyboard key used

    Note pitch

    Lit

    CTK710_e_08-16.p65 06.1.23, 11:23 AM10

  • E-11628A-E-013A

    6 To stop play at any time, press the START/STOPbutton.

    To play an Etude or Concert Piece tune

    1 When you get to step 2 of the above procedure,press the PIANO BANK button in place of theSONG BANK button.

    2 Find the tune you want to play in the PIANO BANKList, and then use the number buttons to input itstwo-digit number.• See page A-9 for the PIANO BANK List.

    3 Next, continue from step 4 of the above procedure.

    Quick Reference

    Indicatorappears

    CTK710_e_08-16.p65 06.1.23, 11:23 AM11

  • E-12

    Power Supply

    This keyboard can be powered by current from a standardhousehold wall outlet (using the specified AC adaptor) or bybatteries. Always make sure you turn the keyboard offwhenever you are not using it.

    Using batteriesAlways make sure you turn off the keyboard before loadingor replacing batteries.

    To load batteries

    1 Remove the battery compartment cover.

    2 Load 6 AA-size batteries into the batterycompartment.• Make sure that the positive (+) and negative (–) ends

    are facing correctly.

    3 Insert the tabs on the battery compartment coverinto the holes provided and close the cover.

    NOTE• The keyboard may not function correctly if you load or

    replace batteries with power turned on. If this happens,turning the keyboard off and then back on again shouldreturn functions back to normal.

    Important Battery Information

    � The following shows the approximate battery life.Alkaline batteries .................................... 4 hoursManganese batteries ............................... 2 hoursThe above value is standard battery life at normaltemperature, with the keyboard volume at mediumsetting. Temperature extremes or playing at very loudvolume settings can shorten battery life.

    WARNING

    Misuse of batteries can cause them to leak, resulting indamage to nearby objects, or to explode, creating the risk offire and personal injury. Always make sure you observe thefollowing precautions.• Never try to take batteries apart or allow them to

    become shorted.• Never expose batteries to heat or dispose of them by

    incineration.• Never mix old batteries with new ones.• Never mix batteries of different types.• Do not charge the batteries.• Make sure the positive (+) and negative (–) ends of

    the batteries are facing correctly.

    CAUTION

    Misuse of batteries can cause them to leak resulting indamage to nearby objects, or to explode, creating the risk offire and personal injury. Always make sure you observe thefollowing precautions.• Use only batteries that are specified for use with this

    product.• Remove batteries from the product if you do not plan

    to use it for a long time.

    Tab

    628A-E-014A

    CTK710_e_08-16.p65 06.1.23, 11:23 AM12

  • E-13

    Power Supply

    628A-E-015A

    Using the AC AdaptorMake sure that you use only the AC adaptor specified forthis keyboard.

    Specified AC Adaptor: AD-5

    [Rear Panel]

    Note the following important precautions to avoid damageto the power cord.

    �During Use• Never pull on the cord with excessive force.• Never repeatedly pull on the cord.• Never twist the cord at the base of the plug or connector.• The power cord should not be stretched tight while it is

    in use.

    �During Movement• Before moving the keyboard, be sure to unplug the AC

    adaptor from the power outlet.

    �During Storage• Loop and bundle the power cord, but never wind it

    around the AC adaptor.

    IMPORTANT!• Make sure that the keyboard is turned off before

    connecting or disconnecting the AC adaptor.• Using the AC adaptor for a long time can cause it to

    become warm to touch. This is normal and does notindicate malfunction.

    Auto Power OffWhen you are using battery power, keyboard power turnsoff automatically whenever you leave it on withoutperforming any operation for about 6 minutes. When thishappens, use the POWER/MODE switch to turn power backon.

    NOTE• Auto Power Off is disabled (it does not function) when

    you are using the AC adaptor to power the keyboard.

    To disable Auto Power OffHold down the TONE button while turning on the keyboardto disable Auto Power Off.

    NOTE• When Auto Power Off is disabled, the keyboard does

    not turn off automatically no matter how long it is leftwith no operation being performed.

    • Auto Power Off is automatically enabled whenever youturn on keyboard power.

    SettingsAll keyboard settings are returned to their initial defaultswhenever keyboard power is turned back on after beingturned off by operation of the POWER/MODE switch or AutoPower Off.

    DC 9V jack

    AC adaptor AD-5

    AC outlet

    CTK710_e_08-16.p65 06.1.23, 11:23 AM13

  • E-14 628A-E-016A

    Connections

    Phones/Output TerminalBefore connecting phones or other external equipment, besure to first turn down the volume settings of the keyboardand the connected equipment. You can then adjust volumeto the desired level after connections are complete.

    [Rear Panel]

    White Red PIN plug

    Stereo standard plug

    Audio connection

    PHONES/OUTPUT terminal

    Keyboard amp, guitar amp, etc.

    1

    LEFT RIGHTAUX IN or similar terminal

    of audio amplifier

    2

    3

    Connecting Phones (Figure 1)

    Connecting phones cuts off output from the keyboard’s built-in speakers, so you can play even late at night withoutdisturbing anyone.

    Audio Equipment (Figure 2)

    Connect the keyboard to a audio equipment using acommercially available connecting cord with a standard plugon one end and two PIN plugs on the other end. Note thatthe standard plug you connect to the keyboard must be astereo plug, otherwise you will be able to output only one ofstereo channels. In this configuration, you normally set theinput selector of the audio equipment to the terminal (usuallymarked AUX IN or something similar) where the cord fromthe keyboard is connected. See the user documentation thatcomes with your audio equipment for full details.

    Musical Instrument Amplifier (Figure 3)

    Use a commercially available connecting cord* to connect thekeyboard to a musical instrument amplifier.

    * Be sure to use a connecting cord that has a stereo standardplug on the end you connect to the keyboard, and aconnector that provides dual channel (left and right) inputto the amplifier to which you are connecting. The wrongtype of connector at either end can cause one of the stereochannels to be lost.

    When connected to a musical instrument amplifier, set thevolume of the keyboard to a relatively low level and makeoutput volume adjustments using the amplifier’s controls.

    INPUT 1

    INPUT 2

    PIN jackPIN plug (red)

    PIN plug (white)Stereo standard plug Keyboard or

    guitar amp

    To keyboard’s PHONES/OUTPUT terminal

    Standard plug

    [Connection Example]

    Connecting to a Computer orOther EquipmentYou can also connect the keyboard to a computer or sequencer.See “Connecting to a Computer” on page E-30 for details.

    Sustain jack TerminalYou can connect an optional sustain pedal (SP-3 or SP-20) tothe SUSTAIN jack terminal to enable the capabilitiesdescribed below.

    Sustain Pedal

    • With piano tones, depressing the pedal causes notes tolinger, much like a piano’s damper pedal.

    • With organ tones, depressing the pedal causes notes tocontinue to sound until the pedal is released.

    Microphone JackYou can connect a commercially available microphone to themicrophone jack and sing along with notes played on thekeyboard. For details, see “Using the Microphone Jack” onpage E-16.

    Accessories and OptionsUse only the accessories and options specified for thiskeyboard. Use of non-authorized items creates the danger offire, electrical shock, and personal injury.

    SUSTAIN jack Terminal

    SP-20

    CTK710_e_08-16.p65 06.1.23, 11:23 AM14

  • E-15628A-E-017A

    Basic Operations

    This section provides information on performing basickeyboard operations.

    Playing the Keyboard

    To play the keyboard

    1 Set the POWER/MODE switch to NORMAL.

    2 Use the MAIN VOLUME slider to lower thekeyboard volume.• It’s always a good idea to set the keyboard volume at

    a relatively low level before playing.

    3 Play something on the keyboard.

    Selecting a ToneThis keyboard comes with 242 built-in tones. Use thefollowing procedure to select the tone you want to use.

    To select a tone

    1 Find the tone you want to use in the TONE List andnote its tone number.• Not all of the available tones are shown on the tone

    list printed on the keyboard console. For a completelist, see the “Tone List” on page A-1.

    2 Press the TONE button.

    3 Use the number buttons to input the three digit tonenumber for the tone you want to select.Example: To select “041 ACOUSTIC BASS”, input 0, 4 and

    then 1.

    NOTE• Always input all three digits for the tone number,

    including leading zeros (if any). If you input one or twodigits and stop, the display will automatically clear yourinput after a few seconds.

    • You can also increment the displayed tone number bypressing [+] and decrement it by pressing [–].

    Combination tonesThe following describes the two types of combination tonesthat are available.

    Layered Tones (Tone Numbers: 098 through 107)Example: 098 STRINGS PIANO

    This tone layers a strings tone with a piano tone so they bothsound when a keyboard key is pressed.

    Split Tones (Tone Numbers: 108 through 112)Example: 108 BASS/PIANO

    This tone splits the keyboard so one range is assigned a basstone and another range is assigned a piano tone.

    BASS PIANO

    A c o u s . B s

    POWER/MODEMAIN VOLUME

    Number buttonsTONE

    MIC VOLUME

    Indicatorappears

    CTK710_e_08-16.p65 06.1.23, 11:23 AM15

  • E-16

    Basic Operations

    628A-E-018A

    Percussion soundsExample: 241 DRUM SET

    This tone assigns various percussion sounds to the keyboard.See the “Percussion Instrument List” on page A-5 for fulldetails.

    PolyphonyThe term polyphony refers to the maximum number of notesyou can play at the same time. The keyboard has 32-notepolyphony, which includes the notes you play as well as therhythms and auto-accompaniment patterns that are playedby the keyboard. This means that when a rhythm or auto-accompaniment pattern is being played by the keyboard, thenumber of notes (polyphony) available for keyboard play isreduced. Also note that some of the tones offer only 16-notepolyphony.

    NOTE• When rhythm or auto accompaniment is playing, the

    number of sounds simultaneously played is reduced.

    Using the Microphone JackConnecting a commercially available microphone to the MICIN jack makes it possible to sing along with the keyboard’sbuilt-in tunes. When connecting a microphone, be sure to firstadjust the MIC VOLUME to a relatively low setting, and thenadjust to the level you want after connecting.

    1 Set the MIC VOLUME slider setting so it is on the“MIN” side.

    2 Turn on the microphone’s ON/OFF switch.

    3 Use the MIC VOLUME slider to adjust microphonevolume to the level you want.

    IMPORTANT!• Be sure to use the microphone’s ON/OFF switch to turn

    off the microphone and to disconnect the microphonefrom the keyboard whenever you are not using it.

    Recommended Microphone Type

    • Dynamic microphone (standard plug)

    IMPORTANT!• Be sure to disconnect the microphone from the keyboard

    whenever you are not using it.

    Howling (Feedback Noise)Any of the following conditions can cause howling (feedbacknoise).

    • Covering the head of the microphone with your hand• Positioning the microphone too near to a speaker

    Should howling occur, try grasping the microphone furtheraway from the head, and move away from any nearbyspeaker.

    Static NoiseFluorescent lighting can cause static noise in the microphonesignal. When this happens, move away from the lighting yoususpect may be causing the static.

    MIC VOLUME slider

    Microphone

    Microphone ON/OFF switch

    [Rear Panel]

    CTK710_e_08-16.p65 06.1.23, 11:23 AM16

  • E-17

    Auto Accompaniment

    This keyboard automatically plays bass and chord parts inaccordance with the chords you finger. The bass and chordparts are played using sounds and tones that areautomatically selected to select the rhythm you are using.All of this means that you get full, realistic accompanimentsfor the melody notes you play with your right hand, creatingthe mood of an one-person ensemble.

    Selecting a RhythmThis keyboard provides you with 100 exciting rhythms thatyou can select using the following procedure.

    To select a rhythm

    1 Find the rhythm you want to use in the RHYTHMList and note its rhythm number.• Not all of the available rhythms are shown on the

    rhythm list printed on the keyboard console. For acomplete list, see the “Rhythm List” on page A-8.

    2 Press the RHYTHM button.

    3 Use the number buttons to input the two digitrhythm number for the rhythm you want to select.Example: To select “48 WALTZ 1”, input 4 and then 8.

    NOTE• “00 8 Beat 1” is the initial default rhythm setting whenever

    you turn on keyboard power.• You can also increment the displayed rhythm number

    by pressing [+] and decrement it by pressing [–].• Accompaniment sounds (chords, bass, etc.) do not

    sound while a metronome rhythm (No. 95 to 99: 0, 2, 3,4, 6) is being used, even if the POWER/MODE switchsetting is “CASIO CHORD” or “FINGERED”. Becauseof this, you should set the POWER/MODE switch to“NORMAL” when using a metronome rhythm.

    Playing a RhythmUse the following procedure to start and stop rhythm play.

    To play a rhythm

    1 Set the POWER/MODE switch to NORMAL.

    2 Press the START/STOP button to start play of thecurrently selected rhythm.

    3 To stop rhythm play, press the START/STOP buttonagain.

    NOTE• All of the keyboard keys are melody keys while the

    POWER/MODE switch is set to NORMAL.

    628A-E-019A

    W a l t z 1

    START/STOPSYNCHRO

    TEMPOFILL-IN

    POWER/MODE Number buttonsRHYTHM

    Indicatorappears

    CTK710_e_17-20.p65 06.1.23, 11:23 AM17

  • E-18

    Auto Accompaniment

    628A-E-020A

    Adjusting the TempoYou can adjust the tempo of rhythm play within a range of40 to 255 beats per minute. The tempo setting is applied toAuto Accompaniment chord play, and song bank operations.

    To adjust the tempo

    1 Use the TEMPO buttons ( / ) to adjust the tempo. : Increases the tempo value. : Decreases the tempo value.

    Example: Hold down the button until the tempovalue 110 is on the display.

    NOTE• Pressing both TEMPO buttons ( and ) at the same

    time resets the tempo to the default value of the currentlyselected rhythm.

    About the Graphic MetronomeThe graphic metronome appears on the display along withthe tempo value and beat of a rhythm or built-in tune. Thegraphic metronome helps you keep in time as you play alongwith a rhythm or built-in tune.

    Using Auto AccompanimentThe following procedure describes how to use the keyboard’sAuto Accompaniment feature. Before starting, you shouldfirst select the rhythm you want to use and set the tempo ofthe rhythm to the value you want.

    To use Auto Accompaniment

    1 Set the POWER/MODE switch to CASIO CHORDor FINGERED.

    2 Press the START/STOP button to start play of thecurrently selected rhythm.

    3 Play a chord.• The actual procedure you should use to play a chord

    depends on the current POWER/MODE switchposition. Refer to the following pages for details onchord play.

    CASIO CHORD ...............This pageFINGERED ....................... Page E-19

    4 To stop Auto Accompaniment play, press theSTART/STOP button again.

    NOTE• If you press the SYNCHRO button in place of the START/

    STOP button in step 2, the rhythm pattern starts to playautomatically when you perform the operation in step 3.For details about these buttons, see page E-20.

    • You can adjust the accompaniment part volume levelindependently of the main volume. For details, see“Adjusting Accompaniment and Song Bank Volume” onpage E-28.

    CASIO CHORDThis method of chord play makes it possible for anyone toeasily play chords, regardless of previous musical knowledgeand experience. The following describes the CASIO CHORD“Accompaniment keyboard” and “Melody keyboard”, andtells you how to play CASIO CHORDs.

    Tempo valueGraphic metronome

    8 B e a t 1

    Basic fingering of current chord(May be different from chord actuallybeing played on the keyboard.)

    Chord name

    CTK710_e_17-20.p65 06.1.23, 11:23 AM18

  • E-19628A-E-021A

    Auto Accompaniment

    NOTE• It makes no difference whether you press black or white

    keys to the right of a major chord key when playing minorand seventh chords.

    FINGEREDFINGERED provides you with a total of 15 different chordtypes. The following describes the FINGERED“Accompaniment keyboard” and “Melody keyboard”, andtells you how to play a C-root chord using FINGERED.

    FINGERED Accompaniment Keyboard and MelodyKeyboard

    NOTE• The accompaniment keyboard can be used for playing

    chords only. No sound will be produced if you try playingsingle melody notes on the accompaniment keyboard.

    C

    Caug *1

    Cm7 *2

    C7�5 *1

    Cmadd9 *2

    Cm

    Csus4

    Cmaj7 *2

    C7sus4

    CmM7 *2

    Cdim

    C7 *2

    Cm7�5

    Cadd9 *2

    Cdim7 *1

    CASIO CHORD Accompaniment Keyboard and MelodyKeyboard

    NOTE• The accompaniment keyboard can be used for playing

    chords only.No sound will be produced if you try playing singlemelody notes on the accompaniment keyboard.

    Chord TypesCASIO CHORD accompaniment lets you play four types ofchords with minimal fingering.

    Major chordsMajor chord names are markedabove the keys of theaccompaniment keyboard. Notethat the chord produced when youpress an accompaniment keyboarddoes not change octave, regardlessof which key you use to play it.

    Minor chords (m)To play a minor chord, keep themajor chord key depressed andpress any other accompanimentkeyboard key located to the rightof the major chord key.

    Seventh chords (7)To play a seventh chord, keep themajor chord key depressed andpress any other twoaccompaniment keyboard keyslocated to the right of the majorchord key.

    Minor seventh chords (m7)To play a minor seventh chord,keep the major chord keydepressed and press any otherthree accompaniment keyboardkeys located to the right of themajor chord key.

    CC DE FF# � E #GA�A BB� CC DE FE# �

    CC DE FF# � E #GA�A BB� CC DE FE# �

    CC DE FF# � E #GA�A BB� CC DE FE# �

    CC DE FF# � E #GA�A BB� CC DE FE# �

    C Major (C)

    C minor (Cm)

    C seventh (C7)

    C minor seventh (Cm7)

    Chord types Example

    Melody keyboardAccompaniment

    keyboard

    Melody keyboardAccompaniment

    keyboard

    See the “Fingered Chord Chart” on page A-6 for details onplaying chords with other roots.

    *1: Inverted fingerings cannot be used. The lowest note is theroot.

    *2: The same chord can be played without pressing the 5th G.

    CTK710_e_17-20.p65 06.1.23, 11:23 AM19

  • E-20 628A-E-022A

    Auto Accompaniment

    NOTE• Except for the chords specified in note*1 above, inverted

    fingerings (i.e. playing E-G-C or G-C-E instead of C-E-G) will produce the same chords as the standardfingering.

    • Except for the exception specified in note*2 above, all ofthe keys that make up a chord must be pressed. Failureto press even a single key will not play the desiredFINGERED chord.

    Using a Fill-in PatternFill-in patterns let you momentarily change the rhythmpattern to add some interesting variation to yourperformances.

    The following procedure describes how to use the Fill-infeature.

    To insert a fill-in

    1 Press the START/STOP button to start rhythm play.

    2 Press the FILL-IN button to insert a fill-in patternfor the rhythm you are using.

    Synchro Starting Accompanimentwith Rhythm PlayYou can set up the keyboard to start rhythm play at the sametime you play the accompaniment on the keyboard.

    The following procedure describes how to use synchro start.Before starting, you should first select the rhythm you wantto use, set the tempo, and use the POWER/MODE switch toselect the chord play method you want to use (CASIOCHORD, FINGERED).

    To use synchro start

    1 Press the SYNCHRO button to put the keyboardinto synchro start standby.

    2 Play a chord on the accompaniment keyboard andthe rhythm pattern starts to play automatically.

    NOTE• If the POWER/MODE switch is set to NORMAL, only

    the rhythm plays (without a chord) when you play on theaccompaniment keyboard.

    • To cancel synchro start standby, press the SYNCHRObutton one more time.

    Flash

    CTK710_e_17-20.p65 06.1.23, 11:23 AM20

  • E-21628A-E-023A

    Playing a Built-in Tune

    Your keyboard comes with a total of built-in 100 tunes. Youcan play back built-in tunes for your own listening pleasure,or you can use them for practice and even sing-along. Built-in tunes are divided between the two groups described below.

    • Song Bank: 50 tunesThe tunes in this group are Auto Accompaniment tunes.

    • Piano Bank Group: 50 tunesThe tunes in this group are piano tunes.

    To play back a Song Bank tunePREPARATION• Adjust the main volume (page E-15).

    1 Find the tune you want to play in the SONG BANKList, and note its number.• See page A-9 for the SONG BANK List.

    2 Press the SONG BANK button to enter the SongBank Mode.

    Indicatorappears

    3 Use the number buttons to input the tune’s two-digit number.Example: To select “40 ALOHA OE”, input 4 and then 0.

    NOTE• Tune Number 00 is the initial default Song Bank tune

    setting whenever you turn on keyboard power.• You can also increment the displayed tune number by

    pressing [+] and decrement is by pressing [–].

    4 Press the START/STOP button to start play of thetune.

    5 Press the START/STOP button to stop playback ofthe Song Bank tune.• The tune you select continues to play until you stop

    it.

    A l o h a O e

    Song number Song name

    A l o h a O e

    Keyboard keys used Fingering

    Staff display

    Chord name

    START/STOP TEMPOSONG BANK

    Number buttonsTONE

    PIANO BANK

    CTK710_e_21-27.p65 06.1.23, 11:23 AM21

  • E-22

    Playing a Built-in Tune

    628A-E-024A

    To play back a Piano Bank tune

    1 Find the tune you want to play in the PIANO BANKList, and note its number.• See page A-9 for the PIANO BANK List.

    2 Press the PIANO BANK button to specify the PianoBank group.

    NOTE• Pressing the PIANO BANK button changes the tone to

    STEREO GRAND PIANO (Tone Number 000).

    3 Use the number buttons to input the two-digit tunenumber you looked up in step 1.Example: To select tune number 03 (Ode To Joy), input

    0 and then 3.

    NOTE• Tune Number 00 is the initial default Piano Bank tune

    setting whenever you turn on keyboard power.• You can also change the displayed tune number using

    the [+] and [–] buttons.

    4 Press the START/STOP button to start playback.

    5 To stop playback, press the START/STOP button.• The tune you select continues to play until you stop

    it.

    Adjusting the TempoEach tune has a preset default tempo (beats per minute) thatis set automatically whenever you select a tune. While thetune is playing, you can change the tempo setting to a valuein the range of 40 to 255.

    To set the tempo

    1 Use the TEMPO buttons to set the tempo. : Increases the tempo value. : Decreases the tempo value.

    NOTE• While the tempo value is flashing, you can also use the

    number buttons or [+] and [–] to input a three-digit value.Note that you must input leading zeros, so 90 is inputas 090.

    • Pressing both the and TEMPO buttons at the sametime automatically returns the currently selected rhythmto its default tempo.

    • Piano Bank tunes have tempo changes part way throughin order to produce specific musical effects. Note thatthe tempo setting automatically returns to the defaultwhenever a tempo change occurs within one of thesetunes.

    Indicatorappears

    O d e T o J o y

    Flash

    Tempo value

    CTK710_e_21-27.p65 06.1.23, 11:23 AM22

  • E-23

    Playing a Built-in Tune

    628A-E-025A

    To change the melody tone

    1 Press the TONE button.

    2 Find the tone you want in the TONE List, and thenuse the number buttons to input its three-digitnumber.Example: To select “049 VIOLIN”, input 0, then 4, then 9.• You can select any one of the keyboard’s built-in tones.

    NOTE• You can also use the [+] and [–] buttons to change the

    melody tones.• For two-hand tunes (Piano Bank tunes), the same tone

    is applied for both the left and right hand parts.• Specifying the tune number for the same tune that is

    currently selected returns the melody tone to the defaultsetting for that tune.

    To play all tunes in succession

    1 Press the SONG BANK button and PIANO BANKbutton at the same time.• Playback starts from Song Bank tune number 00,

    followed in sequence by Piano Bank tunes.

    2 To stop tune play, press the START/STOP button.

    NOTE• While a tune is playing, you can use the number buttons

    or [+] and [–] to change to another tune.• You can play along with the tunes on the keyboard.

    V i o l i n

    Indicatorappears

    Using the PIANO BANK ButtonPressing the PIANO BANK button provides instant access topiano tones and piano tune selection.

    Initial Piano Bank Setting

    Tone: 000 STEREO GRAND PIANO

    To use the piano bank

    1 Press the PIANO BANK button.

    2 Now try playing something on the keyboard.• The notes you play sound with a piano tone.

    3 If you want to playback the built-in tune, press theSTART/STOP button.• This causes the currently selected tune to play in an

    endless loop.• To stop playback, press the START/STOP button

    again.

    Indicatorappears

    CTK710_e_21-27.p65 06.1.23, 11:23 AM23

  • E-24

    3-Step Lesson

    628A-E-026A

    With the 3-Step Lesson System, you can practice built-in tunesand even plot your progress according to the evaluationpoints the keyboard awards you.

    Lesson Progress

    Step 1

    Targeted Practice

    EvaluationStep 2 Step 3

    3-Step LessonThe 3-step lesson feature takes you through the three distinctsteps described below to help you learn to play tunes on thekeyboard.

    Step 1 – Master the timing.

    Step 2 – Master the notes.

    Step 3 – Play at normal speed.

    Tune Types and Their Parts

    Song Bank TunesWhen using these tunes for a 3-step lesson, you can practiceplaying along with the melody (right hand) part only.

    Piano Bank TunesWhen using these tunes for a 3-step lesson, you can practiceplaying along with both the left hand and right hand parts.

    Display Contents During 3-stepLesson Play

    Whenever you select an Auto Accompaniment tune for 3-step lesson play, the on-screen keyboard guide and staffnotation shows the note you should play and its length. Theon-screen keyboard guide also shows the notes you play onthe keyboard. The following describes the information thatappears on the display.

    Note PitchThe key you should press lights on the on-screen keyboardguide, while the actual pitch of the note appears in thedisplay’s staff notation area. The fingers you should use toplay the notes are also shown on the display.

    Note LengthThe key stays lit on the on-screen keyboard guide for as longas the note should be sustained. The staff notation andfingerings also remain on the display for the length of thenote.

    Next NoteAn on-screen keyboard guide key flashes to indicate the nextnote to be played, while a number appears on the displaynear the finger you should use to play the next note.

    Series of Same Pitch NotesThe on-screen keyboard guide key turns off momentarilybetween the notes, and lights again for each successive note.The staff notation and fingerings also turn off and back onagain.

    Flash

    Next note

    Current note

    Lit Flash Lit Flash

    1st Note 2nd Note 3rd Note

    Lit

    On-screen keyboard guide

    Example: When play requires pressing keys with fingers3, 2, and then 1

    NOTE• Note length is not indicated when you are using Piano

    Bank tunes with 3-step lesson Steps 1 and 2. As soonas you press a key that is lit on the on-screen keyboardguide, it goes out and the next key you need to pressstarts to flash.

    • Note length is indicated by the on-screen keyboard guidewhen you use Piano Bank tunes with Step 3. In this case,the next key to be pressed does not flash when youpress a lit key and the next finger number does notappear on the display. Only the current finger number isshown.

    3-step Lesson Tempo SettingUse the procedure under “Adjusting the Tempo” on pageE-22 to adjust the tempo for 3-step lesson play.

    CTK710_e_21-27.p65 06.1.23, 11:23 AM24

  • E-25628A-E-027A

    “****” : indicates that the Evaluation Mode was exitedbefore an evaluation result could be obtained.

    NOTE• If you press the START/STOP button and interrupt the

    Evaluation Mode part way through, the monitor screenshows the evaluation points you have accumulated upto that point. In this case, the keyboard does not displaya message.

    Using the Lesson Functions andEvaluation ModePerform the following steps to master your favorite tunes.

    Step 1 – Master the timing.

    1 Select the tune you want to use.

    2 Press the STEP 1 button to start Step 1 play.• The hand you should use is indicated by arrows

    around it.

    • Left hand practice can also be performed with PianoBank tunes. Simply select one of the Piano Bank tunesin step 1, and then press the LEFT button followingstep 2.

    • After a count sounds, they keyboard stands by andwaits for you to play the first note of the tune.

    • Voice fingering guide will use a simulated humanvoice to call out fingering numbers. See “VoiceFingering Guide” on page E-27 for details.

    3-Step Lesson

    START/STOP STEP 3STEP 2

    STEP 1 SCORING

    RIGHTLEFT

    SPEAK

    Display Message“Bravo!” “Great!”

    Evaluation Ranges“Not bad!”“Again!”

    Evaluation ModeThe keyboard’s Evaluation Mode awards points to yourperformances during Step 3 of the 3-Step Lesson. A perfectscore is 100. Also, the Evaluation Mode provides commentsabout your play on the monitor screen.

    Evaluation Mode DisplayLevel Indicator (9 Levels): This indicator shows the evaluationof your current performance at a glance. The more segmentsthat appear, the higher your points.

    Example: 50 points

    Evaluation ResultsAfter you finish playing, the keyboard calculates anevaluation of your total performance, from beginning to end,and displays your total score on the monitor screen. Thegreater the score, the higher your evaluation is.

    Evaluation Rank Display Messages

    Indicators

    A l o h a O e

    Keyboard keys used Fingering

    Indicator appearsNote pitch

    CTK710_e_21-27.p65 06.1.31, 2:08 PM25

  • E-26

    3-Step Lesson

    628A-E-028A

    3 Press any keyboard keys to play the notes.• The key for the next note to be played flashes on the

    on-screen keyboard guide and the keyboard waits foryou to play it. When you press any key to play thenote, the on-screen key remains lit as the note plays.

    • Accompaniment (left-hand part) waits until you pressany key to play a note.

    • If you accidentally press more than one key insuccession, accompaniment is played for thecorresponding number of notes.

    • Pressing more than one key at the same time countsas a single note. Pressing a key while another key isheld down is counted as two notes.

    4 To stop play at any time, press the START/STOPbutton.

    Step 2 – Master the notes.

    1 Select the tune you want to use.

    2 Press the STEP 2 button to start Step 2 play.• Indicators appear around the hand on the display

    whose part is selected for practice.• Left hand practice can also be performed with Piano

    Bank tunes. Simply select one of the Piano Bank tunesin step 1, and then press the LEFT button followingstep 2.

    • After a count sounds, the keyboard stands by andwaits for you to play the first note of the tune.

    • Voice fingering guide will use a simulated humanvoice to call out fingering numbers. See “VoiceFingering Guide” on page E-27 for details.

    3 Play the notes as indicated by the on-screenkeyboard guide.• The key for the next note to be played flashes on the

    on-screen keyboard guide and the keyboard waits foryou to play it. When you press any key to play thenote, the on-screen key remains lit as the note plays.

    • If multiple keys light on the on-screen keyboard guidewhen you are using a two-hand tune, it means thatyou must press all of the keys that are lit.

    4 To stop play at any time, press the START/STOPbutton.

    Step 3 – Play at normal speed.

    1 Select the tune you want to play.

    2 Press the STEP 3 button to start Step 3 play.• Indicators appear around the hand on the display

    whose part is selected for practice.• Left hand practice can also be performed with Piano

    Bank tunes. Simply select one of the Piano Bank tunesin step 1, and then press the LEFT button followingstep 2.

    • Accompaniment (left hand part) starts to play atnormal speed.

    3 Play the notes as indicated by the on-screenkeyboard guide.

    4 To stop play at any time, press the START/STOPbutton.

    A l o h a O e

    Keyboard keys used Fingering

    Indicator appearsA l o h a O e

    Keyboard keys used Fingering

    Indicator appears

    CTK710_e_21-27.p65 06.1.23, 11:23 AM26

  • E-27

    3-Step Lesson

    628A-E-029A

    Evaluation: Find out how thekeyboard evaluates your Step 3 play.

    Use the SCORING button to check the evaluation of yourplay in Step 3.

    1 Press the SCORING button.• This causes the SCORING indicator to appear on the

    display.• A count beat sounds and then evaluation mode starts.

    2 Play in accordance with the guidance on themonitor screen and as told by the voice.• To stop evaluation, press the START/STOP button.

    This displays only the points accumulated up to thatpoint.

    3 After you finished playing, your evaluation resultappears on the display.• For information about evaluation ranks and sound

    effects, see “Evaluation Results” on page E-25.• Pressing the SONG BANK button returns to the tune

    selection screen.

    Voice Fingering GuideVoice fingering guide uses a simulated human voice to callout fingering numbers during Step 1 and Step 2 one-handpart practice. If you need to press a key with your thumb, forexample, voice fingering guide says, “One!” In the case of achord to be played with your thumb, middle and little finger,voice fingering guide says, “One, three, five!”Voice Fingering Guide calls out fingerings only when you donot press the proper key when you should.

    Voice Fingering Guide

    One : ThumbTwo : ForefingerThree : Middle fingerFour : Ring fingerFive : Little finger

    To turn voice fingering guide on or offPress the SPEAK button to toggle voice fingering guide on(voice fingering guide indicator displayed) and off (indicatornot displayed).

    NOTE• Note that Voice Fingering is disabled in the Evaluation

    Mode.• Exiting the Evaluation Mode automatically restores the

    Voice Fingering setting that was in effect when youentered the Evaluation Mode.

    Indicatorappears

    Indicator appears

    B r a v o !

    CTK710_e_21-27.p65 06.1.23, 11:23 AM27

  • E-28 628A-E-030A

    Keyboard Settings

    [+] / [–]Number buttons

    SETTING

    About SETTING buttonEach press of the SETTING button cycles through the settingscreens. If you accidentally pass the screen you want to use,keep pressing the SETTING button until the screen appearsagain.

    Adjusting Accompaniment andSong Bank VolumeYou can adjust the volume of the accompaniment and SongBank tunes independently of the notes you play on thekeyboard. You can specify a volume level in the range of 00(minimum) to 99 (maximum).

    To adjust the accompaniment volume

    1 Press the SETTING button until the accompanimentvolume adjustment screen appears.

    2 Use the number buttons or the [+]/[–] buttons tochange the current volume setting value.Example: 80

    NOTE• The current accompaniment volume value that appears

    in Step 1 automatically clears from the display if you donot input anything within about five seconds.

    • Pressing [+] and [–] buttons at the same timeautomatically sets an accompaniment volume of 99.

    To adjust built-in tune volumeEnter the Song Bank mode or Piano Bank mode, and thenperform the procedure under “To adjust the accompanimentvolume”.• In this case, a song volume screen will appear in place of

    the accompaniment volume screen.

    Transposing the KeyboardTranspose lets you raise and lower the overall key of thekeyboard in semitone units. If you want to play anaccompaniment for a vocalist who sings in a key that’sdifferent from the keyboard, for example, simply usetranspose to change the key of the keyboard.

    To transpose the keyboard

    1 Press the SETTING button until the transpose screenappears on the display.

    2 Use [+] and [–] to change the transpose setting ofthe keyboard.Example: To transpose the keyboard five semitones

    upwards.

    T r a n s +( )

    A c o m p V o l

    A c o m p V o lCurrent accompaniment volume setting

    CTK710_e_28-32.p65 06.1.23, 11:23 AM28

  • E-29

    NOTE• The keyboard can be transposed within a range of –12

    to +12.• The default transpose setting is “00” when keyboard

    power is turned on.• If you leave the transpose screen on the display for about

    five seconds without doing anything, the screen isautomatically cleared.

    • The transpose setting also affects Auto Accompaniment.• Playing back a Song Bank tune automatically returns

    the transpose setting to its standard default of “00”.• The effect of a transpose operation depends on the pitch

    of each note and on the tone you are currently using. Ifa transpose operation causes a note to be outside ofthe allowable range for a tone, the same note in thenearest octave within the range will be substituted.

    Tuning the KeyboardUse the following procedure to fine tune the keyboard tomatch the tuning of another musical instrument.

    To tune the keyboard

    1 Press the SETTING button until the tuning screenappears.

    2 Use the [+], [–], and the number buttons to adjustthe tuning value.Example: To lower tuning by 20

    NOTE• The keyboard can be tuned within a range of –50 cents

    to +50 cents.* 100 cents is equivalent to one semitone.

    • The default tuning setting is “00” when keyboard poweris turned on.

    • If you leave the tuning screen on the display for aboutfive seconds without doing anything, the screen isautomatically cleared.

    • The tuning setting also affects playback from songmemory and Auto Accompaniment.

    • To return the keyboard to its default tuning, perform theabove procedure and press the [+] and [–] buttons atthe same time in step 2.

    T u n e

    T u n e -( )

    Keyboard Settings

    628A-E-031A

    CTK710_e_28-32.p65 06.1.23, 11:23 AM29

  • E-30

    Connection to a Computer

    628A-E-032A

    Connecting to a ComputerThe keyboard’s USB port makes it quick and simple to connectto a computer. After installing the USB MIDI driver onto yourcomputer from the CD-ROM that comes with the keyboard,you will be able to use commercially available MIDI softwareon your computer to exchange data between the keyboardand your computer.

    To install the USB MIDI driver

    1 On the computer to which you plan to connect,install the USB MIDI driver that comes on the CD-ROM that comes bundled with the keyboard.• For information about installing the USB MIDI driver,

    see the “CASIO USB MIDI Driver User ’s Guide”(manual_e.pdf) on the “USB Manual and Driver CD-ROM”.

    NOTE• Before starting actual installation of USB MIDI driver,

    be sure to read the contents of the “readme.txt” file inthe “English” folder on the CD-ROM.

    • Use Adobe Reader or Acrobat Reader to access the USBMIDI driver user ’s guide.*

    * You need to have Adobe Reader or Acrobat Reader installed onyour computer in order to view the contents of the “CASIO USBMIDI Driver User’s Guide” (manual_e.pdf). If your computerdoes not have either Adobe Reader or Acrobat Reader installed,use the procedure below to install it.

    Installing Adobe Reader (Acrobat Reader**)• Place the “USB Manual and Driver CD-ROM” into your

    computer ’s CD-ROM drive.• On the CD-ROM, navigate to the folder named “Adobe”,

    open the folder named “English”, and then double-click“ar601enu.exe” (“ar505enu.exe”**). Follow the instructionsthat appear on your computer screen to install AdobeReader.

    ** Adobe Reader cannot be installed on a computer runningWindows 98. If your computer is running under Windows 98,double-click “ar505enu.exe” to install Acrobat Reader.

    [+] / [–]Number buttons

    SETTING

    RIGHT

    LEFT

    Minimum Computer system RequirementsSupported Operating SystemsOperation is supported under Windows® XP, Windows® 2000,Windows® Me, Windows® 98SE, and Windows® 98.

    � Universal• IBM AT or compatible computer• USB port that provides normal operation under Windows• CD-ROM drive (for installation)• At least 2MB of free hard disk space (not including space

    required for Adobe Reader)

    � Windows XP• 300MHz or higher Pentium processor• At least 128MB of memory

    � Windows 2000• 166MHz or higher Pentium processor• At least 64MB of memory

    � Windows Me, Windows 98SE, Windows 98• 166MHz or higher Pentium processor• At least 32MB of memory

    Driver Signing� Windows XP

    1 Log on to Windows XP using a Computeradministrator account. See the documentation thatcomes with Windows XP for information aboutComputer administrator accounts.

    2 On the Windows [Start] menu, click [ControlPanel].• If you cannot see the [System] icon on the Control

    Panel, click [Switch to Classic View].

    3 Click the [System] icon. On the dialog box thatappears, click the [Hardware] tab, and then clickthe [Driver Signing] button.

    4 On the dialog box that appears, select [Ignore], andthen click [OK].

    CTK710_e_28-32.p65 06.1.23, 11:23 AM30

  • E-31

    Connection to a Computer

    628A-E-033A

    � Windows 2000

    1 Log on using an Administrators group account. Seethe documentation that comes with Windows 2000for information about the Administrators group.

    2 On the Windows [Start] menu, point to [Settings]and then click [Control Panel].

    3 Click the [System] icon. On the dialog box thatappears, click the [Hardware] tab, and then clickthe [Driver Signing] button.

    4 On the dialog box that appears, select [Ignore], andthen click [OK].

    NOTE• Company and product names used herein are

    trademarks of their respective owners.

    Using the USB portNote that you need to purchase a commercially available USBcable to connect the keyboard to a computer using the USBport. Once you establish a USB connection between thekeyboard and a computer, you can exchange data betweenthem.

    To connect to a computer using theUSB port

    1 Use a commercially available USB cable to connectthe keyboard to the computer.

    ComputerUSB port USB cable

    USB connector

    Keyboard USB port

    General MIDI ToneThe General MIDI standard defines the tone numberingsequence, the drum sound numbering sequence, the numberof MIDI channels that can be used, and other general factorsthat determine the sound source configuration. Because ofthis, musical data produced on a General MIDI sound sourcecan be played back using similar tones and identical nuancesas the original, even when played on another manufacturerssound source.This keyboard conforms with General MIDI standards, so itcan be connected to a computer and used to play back GeneralMIDI data that has been purchased, downloaded from theInternet, or obtained from any other source.

    Changing the SettingsThis section tells you how to make the settings required whenconnecting to a computer.

    GM MODE (Default: Off)on: Configures the keyboard for optimal General MIDI data

    play (tone specification matching, etc.)

    oFF: Returns to default keyboard setup.

    1 Press the SETTING button until the GM MODEscreen appears.Example: When GM MODE is turned off

    2 Use the [+] and [–] or [0] and [1] buttons to turnthe setting on and off.Example: To turn GM MODE on

    G M M o d e

    G M M o d e

    CTK710_e_28-32.p65 06.1.23, 11:23 AM31

  • E-32

    Connection to a Computer

    628A-E-034A

    KEYBOARD CHANNEL (Default: 1)The keyboard channel is the channel used to send messagesfrom this keyboard to a computer. You can specify one channelfrom 1 to 16 as the keyboard channel.

    1 Press the SETTING button until the KEYBOARDCHANNEL screen appears.

    2 Use the [+], [–], and the number buttons to changethe channel number.Example: To specify channel 4

    NAVIGATE CHANNEL (Default: 4)When messages are received from a computer for play onthis keyboard, the navigate channel is the channel whose notedata appears on the display. You can select one channel from01 to 16 as the navigate channel. Since this setting lets youuse the data on any channel of commercially available SMFdata to light on the on-screen keyboard guide, you cananalyze how different parts of an arrangement are played.

    1 Press the SETTING button until the NAVIGATECHANNEL screen appears.

    2 Use the [+], [–], and the number buttons [0] through[9] to change the channel number.Example: To specify channel 2

    K e y b d C h

    K e y b d C h

    N a v i . C h

    N a v i . C h

    To turn off specific sounds before playing back tune datathat is being received

    1 While playing tune data, press the RIGHT button.• This cuts the sound of the navigate channel, but on-

    screen keyboard guide keys continue to light inaccordance with the channel’s data as it is received.Press RIGHT button again to turn the channel backon.

    1 While playing tune data, press the LEFT button.• This cuts the sound of the channel whose number is

    one less than the navigate channel, but on-screenkeyboard guide keys continue to light in accordancewith the channel’s data as it is received. Press LEFTbutton again to turn the channel back on.

    Example: If the navigate channel is channel 4, the aboveoperation turns off channel 3.

    LOCAL CONTROL (Default: On)oFF: Anything played on the keyboard is output as a message

    from the USB port, without being sounded by theinternal sound source.

    • Note that no sound is produced by the keyboard if LOCALCONTROL is turned off and no external device isconnected.

    1 Press the SETTING button until the LOCALCONTROL screen appears.Example: When LOCAL CONTROL is on

    2 Use the [+] and [–] or [0] and [1] buttons to turnthe setting on and off.Example: To turn LOCAL CONTROL off

    L o c a l

    L o c a l

    CTK710_e_28-32.p65 06.1.23, 11:23 AM32

  • E-33

    This is an unavoidable result of the digital sampling process,* and does not indicate malfunction.* Multiple digital samples are taken for the low range, middle range, and high range of the

    original musical instrument. Because of this, there may be a very slight difference in tonalquality and volume between sample ranges.

    See pageAction

    PagesE-12, 13

    Page E-15

    Page E-15

    Page E-15

    PagesE-12, 13

    Page E-28

    PagesE-25, 26PagesE-25, 26

    PagesE-28, 29

    Page E-16

    Page E-16

    Page E-16

    Page E-16

    Page E-31

    Troubleshooting

    1. Correctly attach the AC adaptor, makesure that batteries poles (+/–) are facingcorrectly, and check to make sure thatbatteries are not dead.

    2. Set the POWER/MODE switch to theNORMAL position.

    3. Use the MAIN VOLUME slider to increasevolume.

    4. Normal play is not possible on theaccompaniment keyboard while thePOWER/MODE switch is set to CASIOCHORD or FINGERED. Change thePOWER/MODE switch setting toNORMAL.

    Replace the batteries with a set of new onesor use the AC adaptor.

    Use the SETTING button to increase thevolume.

    1. Press the lit key to continue with Step 1 orStep 2 play.

    2. Press the START/STOP button to quitStep 1 or Step 2 play.

    Use the SETTING button to display theapplicable setting screens and set bothtranspose and tuning to 00.

    1. Use a recommended type microphone.

    2. Move the microphone away from sourceof the static.

    1. Increase the microphone volume setting.

    2. Change the microphone ON/OFF switchsetting to ON.

    Stop playback, disconnect the USB cablefrom and then reconnect it to the keyboard’sUSB port, and then try playing back the tuneagain.If this does not correct the problem, exit theMIDI software you are using, and thendisconnect the USB cable from and thenreconnect it to the keyboard’s USB port.Next, restart your MIDI software and tryplayback again.

    628A-E-035A

    A tone’s quality and volumesounds slightly differentdepending where it is played onthe keyboard.

    Problem Possible Cause

    No keyboard Sound

    Any of the following symptomswhile using battery power.

    Auto Accompaniment does notsound.

    On-screen keyboard guide keysstay on.

    When playing with anotherinstrument, keys or tunings do notmatch.

    Static noise when a microphone isconnected.

    No microphone sound

    After transferring song data frommy computer, playback stops partway through.

    1. Power supply problem.

    2. Power is not turned on.

    3. Volume setting is too low.

    4. The POWER/MODE switch isin the CASIO CHORD orFINGERED position.

    Low battery power

    Accompaniment volume is set to00.

    Keyboard is waiting for play of thecorrect note during Step 1 or Step 2play.

    Transpose or tuning is set to a valueother than 00.

    1. Use of a microphone that is adifferent from the type that isrecommended.

    2. Use of the microphone in thevicinity of fluorescent lighting.

    1. Microphone volume setting istoo low.

    2. Microphone ON/OFF switch isset to OFF.

    Digital noise from the USB cable orpower cord caused datacommunication between yourcomputer and keyboard to beinterrupted.

    • Dim power supply indicator• Instrument does not turn on• Dim, difficult to read display• Abnormally low speaker/headphone volume• Distortion of sound output• Occasional interruption of sound when playing at high

    volumes• Sudden power failure when playing at high volumes

    • Dimming of the display when playing at high volume• Continued sound output even after you release a key• A totally different tone may sound• Abnormal rhythm pattern and demo tune play• Abnormally low microphone volume• Distortion of microphone input• Dim power supply indicator when a microphone is used• Sudden power failure when using the microphone

    CTK710_e_33-34.p65 06.1.23, 11:23 AM33

  • E-34

    Specifications

    Model: CTK-710

    Keyboard: 61 standard-size keys, 5 octaves

    Tones: 242 (113 panel tones + 128 General MIDI tones + 1 drum set)

    Polyphony: 32 notes maximum (16 for certain tones)

    Main Volume: Adjustable

    Auto AccompanimentRhythm Patterns: 100Chords: 2 fingering methods (CASIO CHORD, FINGERED)Rhythm Controller: START/STOP, SYNCHRO, FILL-IN

    3-step Lesson: 3 lessons (Step 1, 2, 3)Playback: Repeat play of a single tuneLesson Part: Left hand, right handEvaluation Mode: ScoringVoice Fingering Guide: On/Off

    Song Bank, Piano BankNumber of Tunes: Song Bank: 50, Piano Bank: 50Controllers: START/STOP

    DisplayName display: TONE, RHYTHM, SONG BANK, PIANO BANK name/number, keyboard

    settings name/valueTempo: Tempo value, metronome, synchro standbyChord: Chord name, Chord formFingering: Fingering indicators, partsStaff: 5 octaves with sharp and flat indications, pedal symbol, octave symbolKeyboard: 5 octaves

    Other FunctionsTempo: Variable (216 steps, = 40 to 255)Transpose: 25 steps (–12 semitones to +12 semitones)Tuning: Variable (A4 = approximately 440Hz ±50 cents)Accompaniment/Song Bank Volume: Variable (100 steps, 0 to 99)

    TerminalsUSB port: TYPE BSustain Terminal: Standard jackPhones/Output Terminal: Stereo standard jack

    Output Impedance: 100ΩOutput Voltage: 4V (RMS) MAX

    Power Supply Terminal: 9V DCMicrophone In: Standard jack (with microphone volume slider)

    Input impedance: 2kΩInput sensitivity: 10mV

    Power Supply: Dual power supply systemBatteries: 6 AA-size batteriesBattery Life: Approximately 4 hours continuous operation on alkaline batteries

    Approximately 2 hours continuous operation on manganese batteriesAC Adaptor: AD-5Auto Power Off: Turns power off approximately 6 minutes after last key operation. Enabled

    under battery power only, can be disabled manually.

    Speaker Output: 2.0W + 2.0W

    Power Consumption: 9V 7.7W

    Dimensions: 95.6 x 35.6 x 13.3 cm (37 11/16 × 14 1/16 × 5

    1/4 inch)

    Weight: Approximately 4.0kg (8.8lbs) (without batteries)

    628A-E-036A

    CTK710_e_33-34.p65 06.1.23, 11:23 AM34

  • A-1

    Appendix/Apéndice

    628A-E-073A

    Ton

    e L

    ist/L

    ista

    de

    son

    ido

    s1

    : N

    o./N

    o

    4:

    Ban

    k S

    elec

    t M

    SB

    /MS

    B d

    e se

    lecc

    ión

    de

    ban

    co2

    : To

    ne

    Nam

    e/N

    ombr

    e de

    son

    ido

    5:

    Max

    imu

    m P

    oly

    ph

    on

    y/P

    olifo

    nía

    máx

    ima

    3:

    Pro

    gra

    m C

    han

    ge/

    Cam

    bio

    de p

    rogr

    ama

    6:

    Ran

    ge

    Typ

    e/Ti

    po d

    e ga

    ma

    000

    001

    002

    003

    004

    005

    006

    007

    008

    009

    010

    011

    012

    013

    014

    015

    016

    017

    018

    019

    020

    021

    022

    023

    024

    025

    026

    027

    028

    029

    030

    031

    032

    033

    034

    035

    036

    037

    038

    039

    040

    041

    042

    043

    044

    045

    046

    047

    12

    34

    56

    PIA

    NO

    ST

    ER

    EO

    GR

    AN

    D P

    IAN

    OG

    RA

    ND

    PIA

    NO

    BR

    IGH

    T P

    IAN

    OM

    ELL

    OW

    PIA

    NO

    DA

    NC

    E P

    IAN

    OH

    ON

    KY-

    TO

    NK

    OC

    TAV

    E P

    IAN

    OE

    LEC

    .GR

    AN

    D P

    IAN

    OE

    LEC

    .PIA

    NO

    MO

    DE

    RN

    E.P

    IAN

    OC

    HO

    RU

    S E

    PS

    OF

    T E

    .PIA

    NO

    HA

    RP

    SIC

    HO

    RD

    CO

    UP

    LED

    HA

    RP

    SIC

    HO

    RD

    CLA

    VI

    CH

    RO

    MA

    TIC

    PE

    RC

    CE

    LES

    TAG

    LOC

    KE

    NS

    PIE

    LV

    IBR

    AP

    HO

    NE

    MA

    RIM

    BA

    OR

    GA

    ND

    RA

    WB

    AR

    OR

    GA

    N 1

    DR

    AW

    BA

    R O

    RG

    AN

    2P

    ER

    C.O

    RG

    AN

    1P

    ER

    C.O

    RG

    AN

    2E

    LEC

    .OR

    GA

    NR

    OC

    K O

    RG

    AN

    CH

    UR

    CH

    OR

    GA

    NC

    HA

    PE

    L O

    RG

    AN

    AC

    CO

    RD

    ION

    OC

    TAV

    E A

    CC

    OR

    DIO

    NB

    AN

    DO

    NE

    ON

    HA

    RM

    ON

    ICA

    GU

    ITA

    RN

    YLO

    N S

    TR

    .GU

    ITA

    RS

    TE

    EL

    ST

    R.G

    UIT

    AR

    12 S

    TR

    .GU

    ITA

    RJA

    ZZ

    GU

    ITA

    RC

    LEA

    N G

    UIT

    AR

    ELE

    C.G

    UIT

    AR

    MU

    TE

    GU

    ITA

    RO

    VE

    RD

    RIV

    E G

    TD

    IST

    OR

    TIO

    N G

    TF

    EE

    DB

    AC

    K G

    TB

    AS

    SA

    CO

    US

    TIC

    BA

    SS

    RID

    E B

    AS

    SF

    ING

    ER

    ED

    BA

    SS

    PIC

    KE

    D B

    AS

    SF

    RE

    TLE

    SS

    BA

    SS

    SLA

    P B

    AS

    SS

    YN

    TH

    -BA

    SS

    1

    000

    000

    001

    000

    001

    003

    003

    002

    004

    005

    004

    004

    006

    006

    007

    008

    009

    011

    012

    016

    016

    017

    017

    016

    018

    019

    019

    021

    021

    023

    022

    024

    025

    025

    026

    027

    027

    028

    029

    030

    031

    032

    032

    033

    034

    035

    036

    038

    002

    004

    002

    001

    001

    002

    008

    002

    002

    002

    001

    008

    002

    008

    002

    002

    002

    002

    002

    002

    001

    002

    001

    008

    002

    002

    008

    002

    008

    002

    002

    002

    002

    008

    002

    002

    001

    002

    002

    002

    008

    002

    008

    002

    002

    002

    002

    002

    16 32 32 32 32 16 16 16 32 32 16 16 32 16 32 32 32 32 32 16 16 16 16 16 16 16 32 16 16 16 32 32 32 16 32 32 16 32 32 32 16 32 16 32 32 32 32 32

    A A A A A A A A A A A A A A A A B A A A A A A A A A A A A A A C C C C C C C C C C C C C C C C C

    12

    34

    56

    SY

    NT

    H-B

    AS

    S 2

    ST

    R/O

    RC

    HE

    ST

    RA

    VIO

    LIN

    SLO