user’s manual - rosewill...5 © all rights reserved by rosewill 3. case rise user manual-place the...

14
User’s Manual

Upload: others

Post on 29-Jan-2021

1 views

Category:

Documents


0 download

TRANSCRIPT

  • User’s Manual

  • Front panel

    Front 3x 120mm fans

    Front dust filter

  • 3 © All rights reserved by Rosewill

    User ManualRISECASE

    Accessory Box

    1 x M/B standoff socket Motherboard

    21 x Screw A3.5” HDD

    +Motherboard

    8 x Screw C PSU

    28 x Screw B 2.5” HDD/SSD

    3 x Cable tie Cables

  • 4 © All rights reserved by Rosewill

    1.

    2.

    User ManualRISECASE

    Unscrew to remove left and right panels.

    Place the power supply from the left side intothe chassis and secure with screws.

    NOTICE : -If your power supply is equipped with single fan (120mm, 135mm or 140mm), please have the fan face to the bottom.

    -Please remember to clean the PSU dust filter regularly or insufficient air intake may fail your power supply permanently.

    **Unscrew to remove the cover to install the secondary PSU if necessary.

  • 5 © All rights reserved by Rosewill

    3.

    User ManualRISECASE

    -Place the motherboard onto stand-offs and secure with screws.

    Micro-ATXATX

    E-ATX

    * Screw A

    Motherboard Compatibility

  • 6 © All rights reserved by Rosewill

    4.

    User ManualRISECASE

    -Unscrew to remove expansion slot cover.

    -Secure with thumb screw.

    C

    A

    -Install the add-on card into its position.

    B

  • 8 © All rights reserved by Rosewill

    7.

    User ManualRISECASE

    - Unscrew the screws to remove the HDD/SSD mount.

    *Screw B

    - Reinstall the HDD/SSD mount into position.

    - Unscrew the screws to remove the HDD/SSD mount cover.

    - Screw the 3.5”/2.5” HDD/SSD onto the mount, and reinstall the cover back to the mount.

    (RISE GLOW ONLY)

  • 10 © All rights reserved by Rosewill

    User ManualRISECASE

    10.

    Make sure all necessary cables and wiresare connected, then reinstall side panelsand secure with screws.

  • 12 © All rights reserved by Rosewill

    User ManualRISECASE

    Thank you for purchasing a High-Quality Rosewill Product.

    Please regoster your product at : http://www.rosewill.comfor complete warranty information and future support for your product.

    If you have any question while using our products, please visit our website : www.rosewill.com for user manual or feel free to contact us.

    Support Phone Number: 800-575-9885Support Email: [email protected]

    Appendix B : How to remove the POP out dust filter ( front & top)

    By default, the pop out dust filter doors are locked down by one thumb screws to prevent damage duringtransport. The thumb screws will first need to be removed before the dust filter doors can be easily popped in and out. Should you prefer to disable the pop out feature, simply leave the thumb screw in place.

    Remove the Front and then the Top panel of the case. Locate the thumb screw and twist counterclockwise to remove.

    Push down on the highlighted spots simultaneouslyto unlatch the dust filter for removal.A click sound can be heard.

    Push down on the highlighted spots simultaneouslyto latch in the dust filter when maintenance is complete.A click sound can be heard.

  • www.rosewill.com

    RISE-usermanualCoverRISE-usermanual-P1RISE-usermanual-P2RISE-usermanual-P3RISE-usermanual-P4RISE-usermanual-P5RISE-usermanual-P6RISE-usermanual-P7RISE-usermanual-P8RISE-usermanual-P9RISE-usermanual-P10RISE-usermanual-P11RISE-usermanual-P12RISE-usermanualBACK