usermanual amiko mini combo hd en v130816

1

CONTENTS 1. SAFETY .............................................................................................................................................................3

2. INTRODUCTION .............................................................................................................................................3

3. FEATURES........................................................................................................................................................4

4. REMOTE CONTROL ......................................................................................................................................5

5. FRONT PANEL ................................................................................................................................................6

6. REAR PANEL ...................................................................................................................................................6

7. CONNECTING YOUR SYSTEM ...................................................................................................................7

8. BASIC OPERATIONS .....................................................................................................................................8

8.1 TURN ON STB ...................................................................................................................................................8 8.2 POWER ..............................................................................................................................................................8 8.3 CHANNEL UP/CHANNEL DOWN ........................................................................................................................8 8.4 VOLUME UP/VOLUME DOWN- ..........................................................................................................................8 8.5 NUMBER ...........................................................................................................................................................8 8.6 MUTE ...............................................................................................................................................................8 8.7 PAUSE ...............................................................................................................................................................8 8.8 RECALL ............................................................................................................................................................8 8.9 FAVORITE .........................................................................................................................................................8 8.10 AUDIO ...........................................................................................................................................................9 8.11 INFORMATION ...............................................................................................................................................9 8.12 EPG ..............................................................................................................................................................9 8.13 TV/RADIO ................................................................................................................................................. 10 8.14 CHANNEL LIST ............................................................................................................................................ 10 8.15 SLEEP .......................................................................................................................................................... 11 8.16 PAGE UP/PAGE DOWN ................................................................................................................................ 11 8.17 TEXT ......................................................................................................................................................... 11 8.18 SUBTITLE .................................................................................................................................................... 11 8.19 FIND ............................................................................................................................................................ 11 8.20 ZOOM .......................................................................................................................................................... 12 8.21 MENU.......................................................................................................................................................... 12 8.22 VIDEO FORMAT ........................................................................................................................................... 12 8.23 EXIT ............................................................................................................................................................ 12

9. SERVICE ......................................................................................................................................................... 12

9.1 ORGANIZING SERVICE .................................................................................................................................... 12 9.2 ORGANIZING FAVOURITES .............................................................................................................................. 14

10. INSTALLATION ............................................................................................................................................ 14

10.1 SATELLITE INSTALLATION SATELLITE ........................................................................................................ 15 10.2 FASTSCAN SATELLITE ................................................................................................................................ 17 10.3 AUTO INSTALLATION .................................................................................................................................. 17 10.4 SATELLITE GUIDE ....................................................................................................................................... 17 10.5 TERRESTRIAL INSTALLATION ...................................................................................................................... 17 10.6 CABLE INSTALLATION ................................................................................................................................ 18

11. PREFERENCE ................................................................................................................................................ 18

11.1 LANGUAGE ................................................................................................................................................. 18 11.2 PARENTAL CONTROL .................................................................................................................................. 19 11.3 TIME SETTING ............................................................................................................................................. 20 11.4 TIMER ......................................................................................................................................................... 20 11.5 A/V CONTROL ............................................................................................................................................ 21 11.6 MISCELLANEOUS SETTINGS ........................................................................................................................ 22 11.7 OSD SETTING ............................................................................................................................................. 22

12. SYSTEM .......................................................................................................................................................... 23

2

12.1 INFORMATION ............................................................................................................................................. 23 12.2 DEFAULT SETTING ...................................................................................................................................... 23

12.2.1 Default Value:......................................................................................................................................... 23 12.2.2 Delete All Channels: ............................................................................................................................... 23 12.2.3 Save default value ................................................................................................................................... 24

12.3 SOFTWARE UPGRADE .................................................................................................................................. 24 12.4 UPGRADE BY USB ...................................................................................................................................... 25 12.5 BACKUP TO USB ......................................................................................................................................... 25

13. CONDITIONAL ACCESS ............................................................................................................................. 25

13.1 CA SETTING .................................................................................................................................................... 25

14. USB ................................................................................................................................................................... 26

14.1 FILE LIST ......................................................................................................................................................... 26 14.1.1 Record Files ............................................................................................................................................ 26 14.1.2 MP3 Files ................................................................................................................................................ 26 14.1.3 Image Files .............................................................................................................................................. 28 14.1.4 Video ....................................................................................................................................................... 29 14.1.5 Software .................................................................................................................................................. 29 14.1..6 All ........................................................................................................................................................... 30

14.2 STORAGE INFORMATION ................................................................................................................................. 30 14.3 PVR SETTING .................................................................................................................................................. 30 14.4 USB SPEED TEST ............................................................................................................................................ 31 14.5 REMOVE USB DEVICE SAFELY! ...................................................................................................................... 31

15. INTERNET ...................................................................................................................................................... 31

15.1 NETWORK LOCAL SETTING ............................................................................................................................. 31 15.2 HTTP UPGRADE ............................................................................................................................................... 32 15.3 FTP UPGRADE................................................................................................................................................. 32 15.4 FTP ................................................................................................................................................................. 32 15.5 WEATHER FORECAST ...................................................................................................................................... 33 15.6 RSS READER ................................................................................................................................................... 33 15.7 YOUTUBE ........................................................................................................................................................ 34 15.8 GOOGLE MAPS ................................................................................................................................................ 34

16. GAME .............................................................................................................................................................. 34

16.1 TETRIS ............................................................................................................................................................ 35 16.2 SNAKE ............................................................................................................................................................. 35 16.3 OTHELLO......................................................................................................................................................... 35

17. NEW FEATURES ........................................................................................................................................... 35

17.1 EQUALIZER ..................................................................................................................................................... 35 17.2 TIME SHIFT ..................................................................................................................................................... 35 17.3 RECORD .......................................................................................................................................................... 36

18. TROUBLE SHOOTING ................................................................................................................................. 37

19. SPECIFICATIONS ......................................................................................................................................... 38

3

1. SAFETY

This HD Receiver has been manufactured to satisfy the international safety standards. Please read the following safety precautions carefully.

MAINS SUPPLY: 100 - 240V AC 50/60Hz

OVERLOADING: Do not overload wall outlet, extension cord or adapter as this may result in fire or electric shock.

LIQUIDS: Keep liquids away from the HD Receiver. The apparatus should not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

CLEANING: Disconnect the HD Receiver from the wall outlet before cleaning .Use a light damp cloth (no solvents) to dust the HD Receiver.

VENTILATION: The slots on top of the HD Receiver must be left uncovered to allow proper airflow to the unit. Do not stand the HD Receiver on soft furnishings or carpets. Do not expose the HD Receiver to direct sunlight or do not place it near a heater. Do not stack electronic equipment on top of the HD Receiver.

ATTACHMENTS: Do not use any attachments that are not recommended as these may cause hazard or damage the HD Receiver.

CONNECTION TO THE SATELLITE DISH LNB: Disconnect the HD Receiver from the mains before connecting or disconnecting the cable from the satellite dish.

FAILURE TO DO SO CAN DAMAGE THE LNB.

CONNECTION TO THE TV: Disconnect the HD Receiver from the mains before connecting or disconnecting the cable from the satellite dish. FAILURE TO DO SO CAN DAMAGE THE TV.

EARTHING: The LNB cable MUST BE EARTHED to the system earth for the satellite dish.

LOCATION: Place the HD Receiver indoors in order not to expose to lightening, rain or sunlight.

2. INTRODUCTION

Thank you for purchasing this HD Receiver. This HD Receiver is fully compliant with the international DVB standard and thus transmits digital images, sounds, information guides and teletext directly to your TV through the satellite broadcasting. Now you can comfortably see and receive digitally transmitted music, news, movie and sports satellite broadcasts in your office or at your home. You can enjoy interesting games embedded in HD Receiver. In service search section, both the automatic service search method and the manual search mode are provided. Also it supports DiSEqC 1.0, 1.2 and USALS, enabling you to move your antenna in order to focus preferred satellite. You can save up to 6000 TV and Radio services and work around with the favorite, Lock, Delete, Move and Sort functions. The menu is very modern and supports multiple languages. All functions can be carried out using the remote control and some of the functions can also be carried out using the front panel. The HD Receiver is easy to use and adaptable for future advances. Please be aware that new software may change the functions of the HD Receiver. If you have any difficulties concerning the operation of your HD Receiver, please refer to the relevant section of this manual, including the Troubleshooting. This Manual will provide you with useful information on using this HD Receiver.

4

3. FEATURES

High Definition STB decoder, Full HD 1080p output via HDMI

CONAX CAS7 embedded

Under 0.5 Watt Standby power consumable

Hybridtuner for DVB-S2, DVB-T2/T/C

S/PDIF for digital audio or Dolby digital bit stream output

DiSEqC 1.0, 1.1, 1.2 ,USALS and Unicable supported

USB 2.0 Host, USB-WIFI supported

RJ45 for 10Mbps Ethernet interface

Video Decoding: MPEG-4/H.264, MP@ML, MP@HL,MP@HL, [email protected], [email protected], XVID, DIVX

Audio Decoding: LPCM,AAC-LC,HE-AAC,MP3,Dolby plus

6000 channels (TV and Radio) programs

Electronic Program Guide (EPG)

Subtitle supported

Teletext supported by VBI insertion and software emulation

PVR Ready, Recording and TimeShift

Blind scan, Fast scan and LCN function

Parental lock facility by channel and program event

RTC(Real-Time-Clock)

Full Picture In Graphic(PIG) function

Multilingual menu text supported

Software upgrade via USB, Http, FTP and RS232

5

4. Remote Control

You can power on/off the receiver, operate on screen menu, and use a variety of hot key function.

POWER To switch your receiver on from standby or standby to on.

MUTE

Used to enable or disable the audio NUMERIC KEYS Used to select channels or enter programming parameters TV / RADIO

Receiver switches between TV and Radio mode.

(ZOOM)

Press key select zoom times, from X1 to X16. RECALL

Return to the previous menu or status. TV/SAT Receiver switches between TV and receive mode. INFO To display channel status or various program information of current service. EPG(Electronic Program Guide) Display the Programs guide on screen when available. MENU Displays the Main Menu on the screen, or return to the previous menu or status. EXIT Cancel the user selection and return to the viewing mode from a menu. OK

To select menu option, or to updated on entry. KEY To adjust volume level, or to move cursor left or right in the menu. ^,v KEY

To change channels, or to move cursor up or down in the menu. PAGE+/PAGE- To move up the cursor to the next or previous page in the menu or channel list.

REC Has different functions per menu. Teletext Shows teletext information of the current channel supports. Subtitle

Subtitle Display. F1 In case your TV is connected through RF Modulator (UHF), select output channel number between CH21 and CH69 with up and down key.

(FIND)

Use to prompt find channels sort by character.

TIMER Press timer key you can setup up the Standby time.

VFORMAT Press V.FORMAT button to switch the display mode among "AUTO", "480i","480p", " 576i", "576P", "720P_50","720P_60,"1080i_50"," 1080i_60" ," 1080P_50" and" 1080P_60" FAV(FAVORITE) To set receiver to the favorite server mode, display the favorite channel.

FOLDER

Press this button to enter the Record Manager menu directly. AUDIO(Red Key) Audio channels setup, to select audio mode; Left, Right , Stereo, Mono. OPTION(GREEN KEY) Shows NVOD information of the current channel supports. SAT Display the satellite list at normal picture.

Play Mode Select the play mode in MP3 or JPEG player.

6

USB

To remove the USB Hard Disk safely. TMS(Time Shift) Press this button to display Time Shift info bar. Play

To play the MP3, JPEG, or Record files. Stop

To stop the Time Shift, recording, or MP3/JPEG player. PAUSE

Used to select the freeze function. Press once to freeze the screen picture.

PAGE-

To start Fast Backward function. PAGE+

To start Fast Forward function. SB

To start Slow Backward function. SF

To start Slow Forward function / PREV/NEXT

Switch to preview or next file in play mode

5. Front panel

Remote Sensor: Detects infrared signal from remote control unit. POWER Indicator: while the receiver is power on and at standby mode. Signal Indicator: When receiving signal is strong, the signal indicator is lighted. Card Slot: One CA Interface for Conax. USB: USB 2.0 Host, connect to USB hard disk, or flash disk. (on the left side of the receiver) Display: (LED type) Indicates operating status of receiver.

6. Rear Panel

Please refer to the diagram above for all possible connections of your receiver Do not connect the unit to the mains socket until all other connections have been connected and checked. Your configuration can vary depending on model. LNB IN 13/18V 400mA MAX: This port is to connect the coaxial cable from LNB of your Dish.

RF IN: This port is to connect the coaxial cable from terrestrial antenna.

S/PDIF: Digital Audio interface, connect to AV amplifier S/PDIF input terminal. HDMI: Audio and Video output socket for TV set with HDMI Input Jack only ETHERENT: This is used for internet connection. RS 232: This port is used to connect your receiver and computer through a serial cable. AV OUT: This RCA connector is used to connect TV using RCA cable. IR IN: Connect an External IR-Sensor (Infrared). DC 12V:This is used to connect an external 12V adapter.

7

7. Connecting Your System

There are two ways to connect the receiver to your existing TV system. We recommend using one of the following cases for the best result: 1. If you have a high definition television set, you should use a HDMI cable for best result, Plug one end of the cable into the HDMI socket on the receiver, and the other end into the matching socket on your television. In this case, you do not have to make audio connections because the HDMI connector can output stereo audio or Dolby digital audio. 2. Connect one end of RCA cable to the AV mini jack on the back of the receiver and the other end to a AV mini jack on your TV.

Finally connect the coaxial cable from the LNB to the LNB IN jack on the receiver. With External Audio / Hi-Fi System To connect any external Audio Hi-Fi system, the receiver has been provided with two RCA connectors at the back of the receiver marked with Audio L and R. Connect an RCA stereo cable from the AUDIO L, R jacks on the back of the receiver to the LINE, AUX, SPARE OR EXTRA input jacks on your Hi-Fi System. 6.1 TV with Motorized System (DiSEqC 1.2) Connect one end of your coaxial cable to the LNB IN connector on the receiver and the other end to the REC or Receiver connector on the DiSEqC 1.2 motor. Connect the coaxial cable from the LNB to the LNB connector on the DiSEqC 1.2 motor. All our receivers are designed to be DiSEqC 1.0 and DiSEqC 1.2 compatible. This allows multiple antennas to be connected to the receiver at the same time. If you have two or more fixed antennas or LNBs, then we recommend you use a DiSEqC 1.0 switch. Connect the coaxial cable from the first LNB to the LNB 1 or LNB A input connector of the DiSEqC switch. Do the same for any other LNBs that you have. Connect one end of a coaxial cable to the RF output connector of the DiSEqC switch, connect the other end to the LNB IN socket on the receiver. To the digital receiver, you can connect either a single satellite antenna directly or LNB of multi-feed equipment.

8

8. Basic Operations

8.1 Turn on STB

First, press the [Devices Main Power] to turn on the unit.

When the STB is first used, it will play the first channel

from the default Channel List. If its not the STBs first

use, STB will play the same channel viewed before

turning off.

? Frequently Asked Question

Q: The power of my STB has been turned on and not

in Standby mode, but the TV screen showed

nothing:

A: Make sure the TV set has been set to the correct video input (not the TV channels). For example, if you have connected the unit with the Video1 input of the TV set, the TV set has to be switched to Video1.

Q: The power of my STB has been turn on and not in

Standby mode, but the TV screen showed

nothing except one box with No Signal image.

A: That means the channel, which you select, is no

signal. It could be several causes:

1 The channel which you select is not in your

allocate satellite. The simply solution is to change

channel.

2 The signal of current TV channel is too weak. You

can try to change channel to other strong signal

channels. If the problems still exist, please consult

your local dealer or other professionals for

technical service.

3 You use the Dual LNB, and you need Modify LNB

Type

8.2 Power

1 Press [Power] Key can enter the Standby mode

2 In Standby mode, press [Power] Key again to call

back the unit and go to the previous channel

3 User can also disconnect the devices main power

to end the Standby mode.

8.3 Channel Up/Channel Down

In full screen, press [CH+/CH-] to change channel.

8.4 Volume Up/Volume Down-

In full screen, press [VOL+/VOL-] to adjust volume.

8.5 Number

In full screen, use numeric keys and press [OK] on the

Remote Control Unit to change channel.

8.6 Mute

1 Press [MUTE] key to mute the sound and the

screen will show mute OSD icon.

2 Press [MUTE] key again to restore sound.

8.7 Pause

1 In playing mode, press [Pause] key, the picture will

be paused, but the sound of the channel will still

continue.

2 Press [Pause] key again, the screens picture will

skip over to the current playing picture, and the

sound of the channel will play correspondingly.

8.8 Recall

Press [RETURN] key will directly switch to the previous

channel that you played before current channel.

8.9 Favorite

1 In full screen, press [FAV] key, it will display the

Favorite list window on the left of the screen,

which you can watch like below.

2 In the " Favorite list " window you can move

highlight by pressing [Channel Up/Channel Down]

key to select favorite Channels.

3 In the " Favorite list " window you can press

[Left/Right] key to select favorite groups, Pressing

[P-/P+] keys can implement the Page up/Page

down function

9

4 Press [Exit] key to exit the current window.

? Frequently Asked Question

Q: Why does the screen display No Favorite

Channel, after pressing [Favorite] key?

A: It is because you havent set any channels as

favorite channel. Please refer to Favorite

.

8.10 Audio

1 In full screen, press [AUDIO] key to open the

Audio window on the screen.

2 You can modify the audio track by pressing

[Channel Up / Channel Down] key and modify the

audio mode by pressing [Volume Up / Volume

Down] key.

3 Mode: Left/Right/Stereo/Mono

8.11 Information

In full screen, press [INFO] key (press [INFO] key and

[RED] key) to open information screen, the window

shows the parameters of current channel.

8.12 EPG

1 The STB has an Electronic Program Guide (EPG)

to help you navigate channels through all the

possible viewing options. The EPG supplies

information such as channel listings and

starting/ending times for all available channels.

2 Press [EPG] key to display EPG screen.

3 Press [Red] key to select the channels by different

group, such as by Favorite/Satellite/Provider/CAS

etc.

4 Press [Green] key to select different display modes

among Now EPG, Next EPG, More and Schedule,

like the following picture:

10

5 Press [Yellow] key in EPG menu to set a record

timer or go to Timer List menu.

6 In EPG menu, when you select one event by

highlighting item, you can set this event to record

timer list directly by pressing [REC] button.

7 In EPG menu, press [Exit] to close EPG screen.

8.13 TV/RADIO

In TV mode, pressing [TV/RADIO] key can switch to

Radio mode. In Radio mode, press [TV/RADIO] key to

switch to TV mode.

8.14 Channel List

1 In full screen, press [OK] key to enter Channel

List.

2 Press [Red] key to change the different group.

which you can watch, like below.

3 Press [Green] key to display details information for

EPG Now

4 Press [Yellow] key to change the current channels

property, such as FAV/ Lock/ Skip/ Delete/

Rename.

11

5 Press [Blue] key to open the Sort window like

below. There are five kinds of sorting ways. You

can press [Channel Up/Channel Down] key to

move highlight and press [OK] key to confirm your

selection.

6 The five ways of sorting are:

Default: Sorting by scanning result.

FTA/$: Sort channel through free and

scrambled sequence. Free channels will

appear at the beginning of the channel list

and scrambled channels will appear at the

end of the channel list .

Lock: Accumulate all locked channels and list

in the end of TV Channel List.

Name (A-Z): Sort in Alphabetical Order,

ignore $ symbol.

Name (Z-A): Sort in Alphabetical Order,

ignore $ Symbol.

7 Press [Up/Down] key to move highlight and press

[OK] key to play the highlighted channel.

8 Press [P -/ P +] key to page up and page Down.

9 Press [Exit] key to exit the channel list.

8.15 Sleep

1 This function can set sleep timer. When you set a

sleep timer and the time arrives, the system will

automatically enter standby mode.

2 Pressing [SLEEP] key, it will switch the mode

between Sleep Timer Off /10/30/60/90/120

minutes.

8.16 Page Up/Page Down

In Channel list, press [Page+/Page-] key to page up and

page down the channel list.

8.17 TEXT

1 Press [TTX] key in full screen, you can open

teletext page on any channel which has teletext

information.

2 If the channel has no teletext information, it will

show No Teletext Data on the screen.

8.18 Subtitle

1 Press [Subtitle] key in full screen, you can switch

subtitle on or off.

2 If the channel has no subtitle information, it will

show No subtitle Data on the screen.

8.19 Find

1 Press [Find] key in full screen can open the

Find window like above. You can press

[Channel Up/Channel Down/Volume

Up/Volume Down] key to move highlight and

press [OK] key to input the selected symbol

or letter into the dialogue.

12

2 After input each character, the program list on

the left will search the channel according to

your input and list the matched channel.

3 Move highlight to OK and press [OK] key to

close Find window and you can select

channel from the channels list directly.

8.20 Zoom

1 The [ZOOM] key allows you to magnify a certain

area on the images

2 Press [ZOOM] key again, the image will enlarge by

x1, x2, x4, x6, x8, x12, x16.

3 In x2 ~ x16 image, use [Up/ Down/ left/ right]

key to move the image center area you want to

see.

4 In zoom mode, press [Exit] to close Zoom

window.

8.21 Menu

Press [MENU] key to open the menu, exit the current

menu to previous menu or close the window.

8.22 Video Format

1 Press [P/N] (white) key under Full Screen playback

for 1st, it will show the current system output video

resolution, continuously press this key & system

will switch its output video resolution by sequence

Auto->480i-> 480P-> 576i-> 576p->

720P-50>720P-60>1080i-50>1080i-60>1080p-50

>1080p-60.

8.23 Exit

Press [EXIT] key to exit the current menu to previous

menu or close the window.

9. Service

When you press [Menu] key to enter menu, there will

display the picture like below:

1 Press [Up/Down] key, you can select the submenu

Organizing services and Organizing favorites. If

Menu Lock is On, it will display a dialogue box for

user to input password. The default Password is

0000.

2 Press [OK] key to enter the Organizing Service.

Press [Menu] key to go back to main menu.

9.1 Organizing Service

When you enter Organizing Service menu, there will

display the screen like below.

1 You can move highlight by pressing [Channel

Up/Channel Down] key and [OK] key to select

the programs which you want to edit.

2 You can press [P+/P-] key to implement the

Page Up/Page Down function.

3 You can use [Red] key to switch different

Group.

4 You can press [Green] key to select the

programs by different select mode.

13

5 Press color key can implement the

corresponding function in Organizing

Services.

Groups

1 Press [Red] key to open the Groups window

like above.

2 You can press [Up/Down] key to move

highlight and press [OK] key to select group.

3 Press [Menu] key to close Groups List.

Options

1 Press [Green] key to open the Options

window like above.

2 You can press [Up/Down] key to move

highlight and press [OK] key to confirm the

select mode.

3 Press [Menu] key to close Options List.

Move

1 Select the channels that you want to edit in

channel list by pressing [OK] key or other

select mode.

2 Then press [Right] key to move the highlight

to right toolbar.

3 Select Move icon by pressing [Channel

Up/Channel Down] key and [OK] key.

4 Move the channels to the position that you

want and press [OK] key to confirm. Like the

following picture:

Lock


channel list by pressing [OK] key or other

select mode.


to right toolbar.

3 Select Lock icon by pressing [Channel


4 Lock the channel by pressing [OK] key.

Like the following picture:

Delete


the channel list by pressing [OK] key or other

select mode.


to right toolbar.

14

3 Select Delete icon by pressing [Channel


4 Delete the channel by pressing [OK] key.

Skip and rename

Follow the same way you can set the channels

Skip or rename for highlighted channel.

Find

1 Press [Find] key can open the Find window

like above. You can press [Channel

Up/Channel Down/Volume Up/Volume Down]

key to move highlight and press [OK] key to

input the selected symbol or letter into the

dialogue.

2 After input each character, the program list on

the left will search the channel according to

your input, and list the matched channel.

3 Move highlight to OK and press [OK] key to

close Find window and you can select

channel from the channels list directly.

9.2 Organizing Favourites

This menu is helpful in adding and deleting

services to and from the favorite group.

1 FAV List

Choose the FAV List by pressing FAV button.

2 Add

To add services into favorites, mark the desired services by pressing OK button in Service List, press to choose Add mode and press OK button.

3 Remove

To remove services from favorites, mark the desired services by pressing OK button in Favorite List, press to choose Remove mode and press OK button.

4 Move

You can reorder and move the service to the preferred position in Favorite List.

5 Rename

Select the desired FAV List by pressing FAV button, using , buttons to choose Rename mode and press OK button to display keyboard, and rename it.

6 Group, Options and Find functions

Please refer to the Organizing Services part in this manual.

10. Installation

15

1 Press [Left/Right] key to select menu pages

among Service, Installation, Preference,

System, Conditional Access, Internet,USB

and Game.

2 Press [OK] key to enter the Installation

menu. If Menu Lock is On, it will display a

dialogue box for user to input password. The

default Password is 0000.

3 Press [Up/ Down] key to select menu items.

Press [menu] key to go back to main menu.

10.1 Satellite Installation Satellite

1 Satellite: Press [OK] key to enter the Satellite

list.

2 Press [Up/ Down] key to select satellite.

Press[Page] key to page up or page down.

LNB Type

In this item, press [left/right] key can switch

among Standard, User, "unicable" and

Universal mode.

For Example: If you use the unicable LNB, then

you should select Unicable option in LNB Type

and press OK button will display the submenu for

Unicable setting, like the following picture, you can

select the SCIF Channel, SCIF Frequency and

Satellite Position according to your LNB type.

DiSEqC1.0/ DiSEqC1.1

DiSEqC: You can use [left/right] key to switch

options. There are several options for your

selection:

a) Disable: without DiSEqC.

b) 1/2, 2/2: two ports DiSEqC

c) 1/4, 2/4, 3/4, 4/4: 4 ports DiSEqC

d) 1/8, 2/8 8/8: 8 ports DiSEqC

e) 1/16, 2/16.16/16: 16 ports DiSEqC

Positioner

Positioner In Positioner item, you can press [/

Volume Down]key to switch Off / DiSEqC 1.2 /

USALS functions.

22K

You can use [left/right] key to switch ON / Off.

When this item is switched to ON, receiver will

receive TV and radio input signal from 22K port. If

the item is switched to Off, the receiver will

receive all signal from 0K port.

! Notice When you choose LNB type Universal, you

cannot modify 22K.

16

Polarity

In Polarity item, [left/right] key to switch Auto / H

/ V functions.

TP Edit

When you enter TP Edit menu, there will display

the screen like below:

1 In Satellite item, press [left/right] key to switch

satellite that you want to scan or press[OK]key

to enter satellite list for selection.

2 In TP Index item, you not only can use

[left/right] key to select transponder but you can

also use[Add] and [Delete]functions.

When you press[Green] key, it will display

New TP in TP Index item; You should set

the parameters of TP Frequency and

Symbol Rate for this new transponder. The

parameters of TP Frequency and Symbol

Rate can set using numeric keys. The

available range are 3000~13450 MHz and

1000~45000Ks/s.

When you press[Yellow] key, there will show

up a warning message for reminding whether

you want to delete the current transponder or

not. If you select Yes, the current

transponder will be deleted, and the total

account of transponder will reduce 1

correspondingly.

When you press [Blue] key, it will display a

warning message for reminding whether you

want to delete all transponders or not. If you

select OK, all transponders will be deleted.

3 For the existing transponder, you can also

use numeric keys to modify the parameters of

TP Frequency and Symbol Rate.

4 When you complete your modification, press

[Red] key, it will display a dialog asking the

scan mode, program type, scan type and NIT

Search on/off. After you set up, press [OK]

key to start scanning.

5 In the TP Scan item, press [Exit] key to exit

the scanning and save the current

parameters.

Single Scan

1 Press [Red] key, it will display a dialog asking

the scan mode (means you want to scan all

channels or only scan free channels),

program type (means you want to scan all

channels or only scan TV/Radio channels),

scan type (means preset scan, that is

searching the existed TP. Automatic Scan

means blind scan. There is no need for

existing TP info) and NIT Search on/off. After

you set up, press [OK] key to start scanning.

2 Press [White] key into the blind scanning

immediately.

TP Scan

Press [Green] key to scan current TPs programs.

Auto DiSEqC

Press [Blue] key to run Auto DiSEqC function, it can find satellite connection ports automatically.

Blind Scan

Press [White] key take you directly into blind scan mode to scan the current satellite.

Select satellites

When you Press [SAT] key, you will see the screen

like below:

1 You can press [ok] button to select one or more

satellites and then press [red] button, it will show a

dialog asking scan mode, program type, scan type

17

and NIT Search on/off. After you set up, press

[OK] key to start scanning.

2 Press [green] button to edit the name and

longitude of the select satellite.

3 Press [yellow] button to add a new satellite.

4 Press [blue] button to delete one or more satellites

that you have selected.

5 Press [white] button to move the satellite selected

(note: you can only move one satellite).

10.2 FastScan Satellite

In this menu, you can perform a fastscan by

selecting the provider and press OK button on

Start Search item.

10.3 Auto installation

Auto Installation is a very new and convenient

function. It will automatically detect all dishes

connected to this machine and scan the available

services belonging to the satellite matched

according to satellites and transponders data in

current database. You dont have to input any

parameter of your antenna settings. Just press

OK button to enter this Auto Installation menu

then it starts scanning and shows you the result at

the end of scan.

10.4 Satellite Guide

When you enter Satellite Guide menu, you will

see the screen like below:

Satellite Guide is used for user to enter local

longitude; local latitude and satellite longitude. By

the evaluation from the receiver evaluate the

antenna azimuth and antenna elevation; user can

follow this guidance to adjust antenna.

6 You can use numeric keys to input

parameters in Local Longitude, Local

Latitude and Satellite Longitude.

7 You can use [Left/Right] key to select east or

west in Local Longitude and Satellite

Longitude, select north and south in Local

Latitude.

8 Moving highlight to Start item and press

[OK] key. The lower column on the screen will

calculate the corresponding value

automatically.

9 Orientation means the angle between south

and satellite.

10 Press [MENU] key to draw back to Main

Menu.

10.5 Terrestrial Installation

Press [OK] key to enter the selected item.

18

1 You can select the Bandwidth according different

country.

2 You can set the Tuner Power ON/OFF.

3 Press [white] key can directly into blind scan

mode to scan the current programs.

4 Press [Green] key to enter the following menu.

Scan Mode

1 There are two modes. You can scan channel by

channel or by frequency.

2 When scan band is UHF and region is France,

the range of Ch No. is from 21 to 69. When scan

band is VHF and region is France, the range of

Ch No. is from 6 to 12.(its according to region)

3 You can press [left/right] key to select LCN On/Off

option.

4 Press [white] key to enter blind scan menu, or

press [Green] key to enter TP scan menu.

5 Press [Exit] key to exit the scanning.

10.6 Cable Installation

Press [OK] key to enter the selected item.

1 You can select the Scan Mode, Manual Scan or

Blind Scan.

2 You can input the Frequency by use the numeric

button of the RCU.

3 You can input the Second Frequency by use the

numeric button of the RCU, if you set the Scan

Mode to Manual Scan.

4 You can input the Symbol Rate by use the numeric

button of the RCU.

5 You can select the QAM value among

16QAM,32QAM,64QAM,128QAM and 256QAM.

6 You can turn ON or OFF the NIT Search, if you set

the Scan Mode to Manual Scan.

7 You can use numeric keys to input the

Frequency for LCN Frequency Scanning.

8 When you complete your modification, press OK

button on Search item to enter Scan menu and

then press OK button, it will begin to scan.

11. Preference

When you enter Preference menu, you will see the

screen like below:

In Preference menu:

1 Press[Channel Up/Channel Down]key to select

menu items among Language, Parental Control,

Time setting, Timer, A/V Control, Miscellaneous

Settings and OSD Setting.

2 Press[OK]key to enter the selected item.

11.1 Language

When you enter Language menu, you will see the

screen like below:

19

3 Menu Language: press [left/right] key to select

menu languages, the selections of languages

include: English, Russian, German, Greek,

French, Italian, Spanish, Portuguese, Arabic,

Polish etc.

4 First Audio: Some channels have more than one

audio language for choosing; by this function you

can set the first audio for this channel. If the

playing channel has the same audio as the First

Audio you set, system will play this audio

language as default. If the channel hasnt the

suited audio language, then the system will

compare automatically with second audio

language. The selections of audio languages

include: English, Russian, German, Greek,

French, Italian, Spanish, Portuguese, Arabic,

Polish etc.

5 Second Audio: If the channel has no corresponded

audio with First Audio but have corresponded

audio with Second Audio, system will play the

second audio language as default. If no audio

language corresponds with the Second Audio,

then the default language of current channel will

be played automatically. The selections of audio

languages include: English, Russian, German,

Greek, French, Italian, Spanish, Portuguese,

Arabic, Polish etc.

6 Audio Priority: Press [left/right] key to select Dolby

Digital or Language.

7 EPG: Press [left/right] key to select EPG language.

8 Subtitle Language: Press [left/right] key can select

subtitle language.

9 Teletext: You can set teletext language. If the

streams have this language you can see the

teletext in language you set.

10 Press [MENU] key to draw back from Language

menu.

11.2 Parental Control

You can set a password for anyone who wishes to

operate in the Installation menu. And you can also set

the password for the locked channels. (How to set the

locked channel please refer to LOCK) Here will show

you how to set and how to revise the password.

1 In Parental Lock function, press [OK] key, there

will display a dialogue for you to input the

password. When you input the correct password,

you will see a screen like below:

2 Menu Lock determines that when user wishes to

enter Installation menu, whether user has to

input Password or not. If the setting Menu Lock is

ON this means user have to input password, if

set to OFF means unlocked.

3 Channel Lock determines that when user wishes

to play the locked channels, whether user has to

input the password or not. If the setting is ON,

playing the channels with lock mark will show a

dialogue on the screen and ask for the password.

If the setting Channel Lock is OFF, the Lock

function will be invalid.

4 New Password is used for revising password; you

can input the new password in this item by using

numeric keys directly. After you filled in 4 numbers,

the highlight will auto skip to Confirm Password

and ask you to input the new password again. If

the password is correct, the screen will show a

message Saving Data, Please Wait. After

finished saving and draw back to System Setup

menu, the revising is complete.

20

5 Press [MENU] key to draw back from the Parental

Lock menu.

11.3 Time Setting

When you enter Local Time Setting menu, you will see


GMT Usage: This item is for the usage of GMT. You

can press [left/right] keys to switch On/Off.

The GMT Offset item is valid only when the setting

GMT Usage is ON. You can press [Volume Up /

Volume Down] keys to switch GMT Offset value,

and the range is -12:00 ~ +12:00, increase each

half hour progressively.

You can press [left/right] to control Summer time on

or off.

Date and Time items are valid only when the

setting GMT Usage is OFF. You can press

[Volume Up / Volume Down] keys to move highlight

and use numeric keys to input directly.

If the current channel provides the correct time

information, you will see the current time while you

enter Time menu. If the current channel doesnt

provide time information, you will have to input the

date and time information manually.

Time Display can control time display on or off when

full screen play

Press [MENU] key to draw back from Local Time

Setting Menu.

11.4 Timer

Press [enter] key to open timer menu.

Current time information will display on the first

column; if the current time is incorrect, please modify

the time information in Time item.

Timer Number: You can press [left/right] keys to set

Timer number, and there are 8 timers in total.

Timer Mode: There are several modes for

Timer setting, including Off, Once, Daily, Weekly,

Monthly , Monthly to Friday and Satday to Sunday.

Timer Service: There are three options for Timer

Service, including TV Channel and Radio

Channel (timer setting for channel change and

Wakeup/Sleep) and "Record Radio" and "Record

TV" (Timer setting for Record TV or Radio program

to USB Hard Disk) and Message (reminding

message).

When you select Channel (timer setting for channel

change and Wakeup/Sleep) option in Timer

Service, the screen will display like below:

i. Channel: ress [OK] key to enter channel

list and select channel that you want

setting.

ii. Date: use numeric keys to input your

wakeup date.

iii. On Time: use numeric keys to input your

wakeup time. Once the times up, no matter

what the system is in standby mode or in

playing mode, the system will automatically

switch to the channel you want and start to

play.

iv. Duration: After you set a time for Duration

item, once the times up, the system will

automatically switch to standby mode. If

you do not want this function to work, set

the duration to 00:00.

v. Standby After Finish:You can press

21

[Left/Right] to control the system is in

standby mode or in playing mode after the

record stopped.

When you select Message (reminding

message) option in Timer Service, the

screen will display like below:

vi. Wakeup Message: press [left/right] key to

select reminding message as Birthday,

Anniversary and General.

vii. Date, you can use numeric keys to input

your wakeup date.

viii. On Time: use numeric keys to input your

wakeup time. Once the times up, no matter

what the system is in standby mode or in

playing mode, the system will automatically

display a reminding message.

ix. The message will always display on the

screen, you can press [Exit] key to close it.

x. Standby After Finish:You can press

[Left/Right] to control the system is in

standby mode or in playing mode after the

record stopped.

xi. Extend Record Time :Press [left/right] button

or input the number using numeric keys to

set the Extend Record Time. It is used to

add time at beginning and end of the record

time.

xii. Press [MENU] key to exit the current menu.

11.5 A/V Control

When you enter TV System menu, you will see


Display Mode is for switching the system output

video resolution. Highlight this option and press

left or right key, it will switch video resolution

circularly by the sequence Auto by native

TV 480i 480P 576i 576p

720P1080i-501080i-601080P-50108

0p-60.

This effect is equal to press V.Format Key under

Full Screen and their last setting saving will be

efficient for each other. By Source means system

will set the video output resolution according to the

current program its playing, different resolution

programs switching perhaps will make TV screen

flicker. By Native TV means system will be

according to the HDMI TVs max supported

resolution to set its resolution, if system is not

connected to a HMDI TV, it will set resolution to

default.

Aspect Mode is for switching the screen aspect

ratio mode. Now we provide following options: 4:3

PS / 4:3 LB / 16:9/Auto. You can press [Left/Right]

key to select each mode circularly. 16:9 will

provide user pillar box mode, it means user use

16:9 TV to display but need to see a 4:3 full display

picture. System will force press wide screen

picture to be narrow and there are black bands on

left and right side. Auto means system wont do

any aspect ration translation, 16:9 picture source

will be good display on a 16:9 TV but will be too

narrow on a 4:3 TV, and 4:3 picture source will be

too wide in a 16:9 TV but will be good display in a

4:3 TV.

Video Output: Press [Left/Right] to select

HDMI or RGB.

Digital Audio Out is for setting both SPDIF and

HDMIs digital audio output mode, it has options

LPCM Out, Auto, You can press [Left/Right] Key to

select each mode circularly. LPCM Out means

system will decode no matter AC3 or PCM audio

track data to be LPCM, digital audio decoder or

HDMI TV will get LPCM digital audio data. Auto

means system will detect which the connected

HDMI TV can decode and then output that data. If

HDMI TV can decode AC3, system just output

RAW data, if HDMI TV can decode LPCM only,

22

system will just decode AC3 or LPCM to be LPCM

and then output.

Service Switch Mode: Press [left/right] button to

select unblank or blank.

Press [MENU] key to draw back from AV

System menu.

11.6 Miscellaneous Settings

When you enter Miscellaneous Settings menu, you will see a screen like below:

1 Channel list num: This item provides below

options: 1/2/3,you can press [Left/Right] key to

select each mode circularly.

2 Subtitle Auto: You can press [Left/Right] key to

select On or Off. If the current channel has

subtitle information, it will be showed automatically

while this function is ON, if this function is OFF,

you need turn on the subtitle manually by pressing

[SUBTITLE] key.

3 Auto Power Down: You can press [Left/Right]

key to select the time or Off, if you select time,

duration this time if no any operation on receiver, it

will go to standby mode.

4 Standby mods: if set to Real, Press power key

receiver will be in real standby status, the

consumption will less than 0.5 Watt. if its set to

Fake ,Press power key, receiver will be in fake

standby status.

5 Screen protect: You can press [Left/Right] key to

select the time or Off, if you select time, Radio

full-screen playback duration this time if no any

operation on receiver, it will go to Screen protect

6 Press [MENU] key to draw back from

Miscellaneous Settings Menu.

11.7 OSD Setting

When you enter the OSD Setting menu, you will

see a screen like below:

1 OSD Timeout: When you switch channels in

full screen, there will display information

about current channel on the lower part of the

screen. Regarding the duration this

information is displayed on the screen, you

can press [left/right] key to set the time. The

range of the duration is 1 second ~

10seconds.

2 OSD Position: control display position of the

info bar in full screen mode. You can choose

bottom or top.

3 OSD Transparency: Besides the setting of

OSD Menu Style, you also can set the

transparency of OSD. You can press [left/right]

key to select the value. There are 5 levels of

transparency, 10%, 20%, 30%, and 40% and

OFF (means no transparency function).

4 Brightness/Contrast/ Saturation : You can

adjust the parameter about the Video image

by using the [OK]button or press [left/right]

key, the default value is Level 10.

5 Load Default OSD Setting : If you are not

satisfied with your setting, you can highlight

this item and press [OK] key to reset

parameters as default value.

6 Press [MENU] key to draw back from the

OSD Setting menu.

23

12. System

When you enter System menu, you will see a

screen like below:

In System menu:

1 Press [Up/Down] key to select menu pages

among Information, Default Setting, Software

Upgrade, Upgrade By USB, Backup to USB

2 Press [OK] key to enter the selected item.

12.1 Information

1 When you enter Information menu, you will

see a screen like above. The screen

displays :MODEL ID,S/W VERSION,H/W

VERSION,LOADER VERSION,LATEST

UPDATE,STB SN,STB ID,CHIP ID.

2 Press [MENU] key to draw back to

Information menu.

12.2 Default Setting

12.2.1 Default Value:

When you press [OK] key In the Default

Setting item:

1 There will display a dialogue box for you to

enter the password, the default password is

0000.

2 After you input the correct password, there

will show a warning message asking you

The operation will load default and erase all

the channels that user added, continue?.

3 If you select YES, all the revised

parameters of the receiver will reset to

default value. Please use this function

carefully.

4 In step 1 and step 2, press[Exit]key to draw

back from this item without saving.

12.2.2 Delete All Channels:

24

When you press [OK] key in the Delete All

Channel item, it will display a dialogue box asking

you to confirm to delete all channel. If you select

YES, all channels will be deleted

.

12.2.3 Save default value

When you press [OK] key in the Save default

value item,there will show a message to ask

you"Do you want to set current database as

default data?".If you select YES,it will set the

current data as default data.

12.3 Software Upgrade

Upgrade by RS232:

1 We offer this function for user to connect

receiver (Master) to the other receiver (Slave)

via serial interface.Connect master receiver to

slave receiver via serial interface. Enter

Software Upgrade menu in master receiver

and press[Volume Up/Volume Down]keys to

switch upgrade mode All SW+bootloader /All

SW+Channel list/Software(no channel

list)/Channel list.

2 Moving highlight to Start on master reeciver

and press[OK]key to start upgrade.

3 Turn on slave receiver and it neednt operate

any setting.

4 Press [MENU]key to draw back.

Upgrade By Satellite:

This function can upgrade the software through signal

lines from the satellite

25

1 Select the satellite and TP or input the TP value and

download PID, these parameters you can get from

your provider.

2 Then move the highlight to the start button and press

[OK] button to start upgrade.

12.4 Upgrade By USB

In this menu you can upgrade the software from USB

conveniently, Press Left/Right button select

USB; press ' OK ' button to enter.

In this menu you can select the Upgrade Mode among

Software(No channel list), Channel list, All

SW+bootloader and All SW+Channel list, and you can

select the appropriate upgrade file on "Upgrade File"

item. After you select the "Upgrade Mode" and "Upgrade

File", press ' OK ' button on "Start" item, the receiver can

upgrade automaticlly

.

Note:

You must put the upgrade file on the /ROOT

DIRECTORY of the USB storage.

12.5 Backup to USB

In this menu ,you can dump the software to the

USB equipment

1 In "Backup file",you can press [OK] key to edit

the file name.; Press Left/Right button select

USB A or USB B;

2 In "Backup to USB", you can press [OK] to start

backup software .

13. Conditional Access

13.1 CA Setting

We provide one CA slots for users use. Receiver

has build in smart card module with CONAX

system. By using cards in this system provided by

operators, it is possible to watch many scrambled

channels coded in this system. This menu shows

detailed information about card inserted into card

reader module. It allows inserted according to help

messages visible on the bottom of the screen.

26

Note:

All information showed in this menu and submenu

are coming from inserted card. In case anything is

wrong, there could be a problem with the card.

After inserting the card correctly at any time, a

message-box will show on the screen with

message about detecting the card, in "card info"

menu all available information will be displayed.

You can press [left/right] key to set the message

display time.

14. USB

If you enter the "USB" Menu, you will see the

picture like below:

Note: If no USB Hard Disk inserted into the

receiver this menu is not available.

14.1 File List

In this menu you can select the file list from USB A

or USB B. Press [ok] button to enter the File list.

you can check the files and folders of the USB

storage and you can play MP3 and JPEG files.

14.1.1 Record Files

In this menu you can playback the recorded files,

and you can press [Red] key to rename the file, or

press [Green] key to lock the file, or press [Yellow]

key to delete the file.

You can press [1] key to adjust the volume while

you preview the record file on top of the right

corner and you can press to enable or disable

the audio.

14.1.2 MP3 Files

27

In this menu you can select the MP3 file to play by

pressing [OK] key or [PLAY] key. Also you can set

the play list..

[Red] key: Show play list as the picture bellow:

Red Key:

Move the selected file by pressing Red key and

[UP][DOWN] key.

Green Key:

Delete the selected file by pressing Green key.

Yellow Key:

Delete all files by pressing Yellow Key, but there

will display a dialog box asking Delete All before

practical operation, if user selects Yes, all files will

be deleted, and the Play list window will close.

Press OK button to play file.

[Green] key: All the MP3 files in current directory are added into

MP3 play list by pressing [Green] key, and will

display beside the MP3 files.

[Yellow] key: To edit the files or folders in the USB storage press this button, you can see the picture like the below.

Red Key

To rename the file or folder.

Green Key

To copy the file or folder to another folder.

Yellow Key

To delete the file or folder from the disk.

Blue Key

To create a new folder in the disk. Press [EXIT] key to draw back to EDIT MENU.

[White] key: To set the Repeat mode of the MP3 player.

After begin playing MP3, it will show the MP3 play

window.

Press PAUSE button to pause. Press PLAY

button to play. Press STOP button to stop and

time return to 00:00.

28

Press PREV button to jump to the beginning of

the file list if play is over 3 seconds; or jump to

previous file if play less than 3 seconds.

Press NEXT button to go to the next file.

Press FORWARD button to go forward 4S.

Press BACKWARD button to go back 4S.

Jump to beginning or end if less than 4S to the

beginning or end of music file.

Switch to the next file or stop playing by the repeat

mode when play is over on the current file.

[0] key: To sort the file list by different order.

[FAV] key: To add mp3 or jpeg to play list.

14.1.3 Image Files

Press 'OK' button on the selected files to play the files.

You can preview the picture at the top right corner

if the scroll bar is on the picture files (JPG, BMP),

and show the logo when at MP3 file.

Move scroll bar when press up/down key, page up

or down by page key.

Go into sub-directory when press ok key in the file directory, play the selected file when scroll bar is on the file, automatic return to USB menu after play is over.

White key:

In this menu to user can adjust settings for JPEG

player.

[0] Key:

Sort the file list by pressing [0] button.

[Red] Key:

Show file play list. There will display The type of

playlist does not exist if there are no files.

Image view operation

Please see the below image operation menu if

Image function is selected.

29

Red Key:

Move the selected file by pressing Red key and

[UP][DOWN] key..

Green Key:

Delete the selected file by pressing Green key.

Yellow Key:

Press Yellow Key to delete all image files in play

list, but system will remind you Delete All before

practical operation, if you select Yes, all files will

be deleted and Play list window will be closed.

Press OK button to play file

[Green] key:

All the Image files in current directory are added

into Image play list by pressing Green key, and will

display beside the Image files, like below.

[Yellow] key:

To edit the files or folders in the USB storage like

in MP3 menu. Includes rename, copy, delete and

create folder function. You can press [Left/Right]

key to previous menu.

[Blue] key

To preview the images press this key, you can see

the picture like below.

14.1.4 Video

You can see the video files in this menu, it can

support .mpeg and .ts format file.and press [play]

key to preview the video at the top right corner.

You can press [1] key to adjust the volume while

you preview the video file,press [0]key to sort the

file list. and press to enable or disable the

audio

Yellow key

To edit the files or folders. Includes rename, copy,

delete and create folder functions. You can press

[Left/Right] key to previous menu.

14.1.5 Software

30

If software exists in current directory, you can press [Green] key to upgrade like below.

14.1..6 All

You can preview all files in this menu.

14.2 Storage Information

Press "OK" button to enter the HDD Information

menu like the below picture, in this menu you can

see detailed information about the HDD.

If you want to format the HDD, press "yellow"

button to enter Format menu, then select the File

System between "FAT" and "NTFS", Press "OK"

Button to confirm.

Note: If you format the HDD, all the files including MP3, JPEG and the recorded files will be deleted from the HDD. If you want to change the path for recording files

and timeshift files, press blue button to enter the

DVR Set menu, then press OK button to set the

path on current select disc.

14.3 PVR Setting

Time Shift:

ON: Enable the Time Shift function.

OFF: Disable the Time Shift function.

Timeshift to Record

ON: Means when you press the " " Button

to record the program, it will merge the Timeshift

files and the record files.

OFF: Means when you record the program, it

will start when you press " " button, not include

the Timeshift files.

31

Record Type

You can select the record type by pressing

[left/right] key.

HDD Sleep Time

You can select the HDD sleep time by

pressing [left/right] key. When the HDD is not

being used, it will sleep after the time you

select.

Jump Time

You can select the jump time by pressing

[left/right] key.

Default Record time

You can input with numeric keys in this item to set

the default record time.

Press [Menu] key to draw back to PVR Setting

menu.

14.4 USB Speed Test

In "USB Speed Test" Menu you can see the

Standard speed and your USB harddisk speed,

according to this information you can know what

operation your disk can support.

14.5 Remove USB Device safely!

Use this menu to remove the USB Device safely.

15. Internet

If you enter the "Internet " Menu, you will see the

picture like the below:

You can download new software from the network

via LAN port.

15.1 Network Local Setting

1. Select your Network Type as Wired or Wireless, if you select Wireless, you can configure Wi-Fi (wireless) by the following steps:

a. Select Wireless on Default Network Type item.

32

b. Press [red] button & the wireless LAN network list will appear select you Wi-Fi network and press [ok] button, then input password.

c. Press [OK] button on Connect item to start

connecting.

2. In this menu you may assign a dynamic IP address to the digital receiver. To do so, select DHCP On.

3. If you have a static IP address, unselect the DHCP Enable, then the IP Address, Subnet Mask, Gateway and DNS options become enabled. You have to set these options according to your IP address.

15.2 Http Upgrade

When connected to the Internet, the receiver can

manually or automatically make software update

from file from server.

Note:

This function depends on connection with external

server. In case of no software on server, this

function will not work.

15.3 FTP Upgrade

When connected to the Internet, receiver can

make software update from file from FTP server.

Note:


server. In case of no software on server, this


15.4 FTP

When connected to the Internet, receiver can

download files, such as software, MP3 or Image

files from FTP server.

Note:

33


server. In case of no any files on server, this


15.5 Weather Forecast

In this menu you can see the weather forecast, press [Green] key to add city.

Red key To update the weather forecast to the latest.

Green key To add new city use this menu. You can add upto 5 cities.

Yellow key

To delete current city.

Blue key To switch temperature mode.

15.6 RSS Reader

In this menu you can see the news

Red key To update the news to the latest.

Green key To add new channels,you can input a new website. You can add upto 10 channels.

Yellow key To delete current channel.

Blue key To edit current channel information. You can edit channel name and channel Url.

Press ok button to see detailed infomation like below.

34

15.7 Youtube

This menu is some internet applications. "youtube" can play stream media from "www.youtube.com". When you enter this menu, you will see a screen like below:

1.Press [up/down] key to move highlight.

2.Press [ENTER] key on one item, it will play

pertinent video. The video will show on top left

corner. Press [ENTER] again, it only shows video

in the centre of your screen. Now press [zoom]

key, the video will play in full screen.

3.Press [vol+/vol-] to control volume.

4.Press [pause] key to pause video, or press [stop]

key to stop play.

5. Press [red] key to display the featured video.

6. Press [green] key to sort by site and duration.

The site has Germany, worldwide, Poland and so

on. Duration has all time, this week, this month and

so on.

7.Press [yellow] key to switch group. These are

game, news, tech, move and so on.

8.Press [blue] key to display the top video. These

are top favourites, top rated, most views, most

recent and so on.

9. Press FIND [ ] key in full screen to open the

"Find window. You can press [,,,] keys to move highlight and press[ENTER]key to input the letters .Then press [red] key to find.

15.8 Google Maps

Inside the menu can browse Google Maps

16. Game

35

When you enter Game menu, you will see three

Games including Tetris, Snake and Othello.

Basic operation statement:

16.1 Tetris

a) Move highlight to Setup and press

[Volume Up/Volume Down] key to select

the game level (speed).

b) Move highlight to Start and press [OK] key

to start the game.

c) Move highlight to [Cancel] key and press

[OK] key to draw back from the game.

d) Start the game:

[Volume Up/Volume Down] Move shape

left or right

Channel Up Rotate clockwise

Channel Down Faster drop

[OK] Pause/Play the game

[Exit] Quit game and draw back to

Game menu.

16.2 Snake


[Volume Up/Volume Down] key to select

the game level (speed).

b) Move highlight to Start and press [OK] key

to start the game.

c) Move highlight to[Cancel]key and

press [OK]key to draw back from the game.

d) Start the game:

[Volume Up/Volume Down/Channel

UP/Channel Down] use these arrow

keys to guide the snake.

[OK] Pause/Play game


Game menu.

16.3 Othello


[Volume Up/Volume Down] keys to select

the game level (degree of difficulty).

b) Move highlight to Start and press [OK]

key to start the game.

c) Move highlight to [Cancel] key and

press [OK] key to draw back from the

game.

d) Start the game:

[Volume Up/Volume Down/Channel

UP/Channel Down] use these arrow

keys to guide chessman.

[OK] set chessman.


Game menu.

17. New Features

17.1 Equalizer

When listening to a Radio program, it will display

the music spectrum graphic on TV Screen.

17.2 Time Shift

If you connect the USB HDD, and enable the Time

Shift function in the menu "Main Menu/ Record/

PVR Setting/Time Shift",

It will start the Time Shift function automatically

after you switch the program, and when you press

the "Tms" button the Time Shift info bar will display

as the following picture:

36

1 You can press " " button to pause the video,

and can save the picture to USB HDD by

pressing " P+ " button when the video is

paused.

2 You can press " " or " " button to Fast

Backward or Fast Forward.

3 You can press " " or " " button to Slow

Backward or Slow Forward.

4 Press left" or "right" button to jump to different

position, then press "OK" button to confirm.

5 Press " " button to exit the playback.

17.3 Record

If you connect the USB HDD.

You can press " " button to start record function,

as following picture:

Press " " button to display the record info

bar when you recording.

Press " " button again to set record time.

You can press " " button to pause the video,

and can save the picture to USB HDD by

pressing " P+ " button when the video is

paused.

You can press " " or " " button to Fast

Backward or Fast Forward.

You can press " " or " " button to Slow

Backward or Slow Forward.

Press left" or "right" button to jump to different

position, then press "OK" button to confirm.

Press " " button to stop the recording.

37

18. Trouble Shooting

If you suspect there is a fault with your receiver, please check the following trouble shooting guide

before calling an authorized service agent.

Warning! Under no circumstances attempt to repair the receiver yourself. Tampering with the receiver

may result in fatal electric shock and will invalidate your warranty.

Symptom Possible cause

Settings you made in the

menu have not change

The receiver lost power before being able to enter into standby

mode

Some of the Settings saved by user can be deleted partly or fully

No signal

The level of signal is too weak

LNB is out of order

The cable from the LNB or Terrestrial antenna is incorrectly

Connected (short circuit or open circuit)

The position of dish is aligned incorrectly

Receiver is on, but no picture

or sound except the following

messages (NO TV program)

Channel is not available

Channel is scrambled

Receiver not responding to

remote control unit

RCU batteries are dead or inserted incorrectly

The RCU is pointing toward wrong direction

Poor picture Quality The level of Signal strength is too low

No sound

The cable is connected incorrectly

The Volume level is too low

Mute function is active

No display on the VFD Display

Panel The power cord is not plugged in correctly.

No picture on the screen

Receiver is in Standby mode

RCA Jack or cable is not connected firmly to the video output port

of your television

Incorrect channel or video output is selected on your television

Brightness level of your TV set is incorrectly defined

38

19. Specifications

SYSTEM RESOURCES

Main Processor 594MHz based CPU

Flash Memory 64 Mbits

DDR SDRAM 1024 Mbits

Tuner/Front-end(Optional)

Tuner Type DVB-S / DVB-S2

Input Connector F-type, Connector, Female

Signal Level -65 to -25 dBm

LNB Power & Polarization Vertical: +13V

Horizontal: +18V

Current: Max. 400mA

Overload Protection

22KHz Tone Frequency: 221KHz

DiSEqC Control Amplitude: 0.60.2V

Version 1.0, 1.1 1.2, USALS Available, unicable

Demodulation QPSK, 8PSK

Input Symbol Rate 1-45 Mbps, Convolution Code Rate

Forward Error Correction

(FEC)

DVB-S 1/2, 2/3, 3/4 5/6, 7/8

DVB-S2 1/2, 3/5 , 2/3, 3/4 ,4/5 , 5/6, 8/9 , 9/10

POWER SUPPLY

Input Voltage DC 12V/2A

Power Consumption 24W MAX

MPEG TS A/V Decoding

Transport Stream MPEG-2, H.264

Input Rate Max.120Mbit/s

Aspect Radio 4:3, 16:9, Letter Box

Video Decoding MPEG-2, MP@ML, MPEG-4 part 10/H264

Video Resolution 720*480P/I, 720*576P/I, 1280*720p,1920*1080i, 1920*1080P

Audio Decoding MEPG-1 layer I/II, Mpeg2 layerII, Dolby digital

Audio Mode Left / Right / Stereo/ Mono

Sampling Rate 32, 44.1 and 48KHz

A/V & DATA INPUT/OUTPUT

AV OUT(3.5MM Earphone

Jack)

Video CVBS output

Audio L/R output

IR(3.5MM Earphone Jack) 38Khz

39

RS-232C(3.5MM Earphone

Jack)

Transfer rate 115.2Kbps

9 pin D-sub Type

LAN 10M

USB One USB 2.0 slot Compatible

HDMI VER1.3

Type A

PHYSICAL SPECIFICATION

Size[W*H*D] 150mmX110mmX35mm

Net Weight 0.25KG

Operation Temperature 0~+45

Storage Temperature -10~+70

Storage Humidity 5%~95% RH (Non-Condensing)

Specifications are subject to change without further notice.

The manufacturer does not assume any responsibility regarding any errors or mistakes in printing.

Please note that a new software may change the features of the receiver.

The manufacturer holds the rights of changes without any further notice.

The image shown here is indicative only. The actual product may differ.

usermanual amiko mini combo hd en v130816

Documents

rear panel

channel upchannel

remote control

basic operations

volume upvolume