usermanual kinobottle english
TRANSCRIPT
KinoBottle for Computrainer v0.1.2 1
KINOBOTTLE QUICK START GUIDE
-‐ Power on the KinoBottle -‐ Reach the Ad-‐hoc network "KinoBottle" from your computer -‐ Go to http://10.0.0.1 with your usual web browser -‐ Follow the instructions to add your Wifi network (WPA only)
KINOBOTTLE STEP-‐BY-‐STEP GUIDE
1. Make sure that the Wifi dongle is plugged on any USB port of the bottle. Power on the
KinoBottle and wait for about 60 seconds
2. The KinoBottle will create an Ad-‐hoc Wifi network that you can reach with your PC, Mac, iPhone or iPad (not available on Android)
3. Once you’ve joined the Ad-‐hoc Wifi Network called « KinoBottle », go to http://10.0.0.1 with your usual web browser
KinoBottle for Computrainer v0.1.2 2
4. Select « Edit preferred networks » and Search for available Wifi-‐networks
5. Select your Wifi network and enter the password (WPA only)
6. Restart the KinoBottle and wait 60-‐90 seconds (you will not get any feedback except the green flashing of the Computrainer).
KinoBottle for Computrainer v0.1.2 3
7. The KinoBottle is now connecting automatically to your Wifi network and you’re ready to train on your Computrainer using Kinomap Trainer!
8. You can always edit your preferred networks by : -‐ reaching the IP address of the KinoBottle (see your router status information or the
discovery information in Kinomap Trainer). See below on http://192.168.2.28 for example
-‐ placing the KinoBottle in an area in which the preferred networks are not reachable : it will fall back to the Ad-‐hoc mode
9. You can remove a preferred network by selecting it in the Edit neworks list. Don’t forget
to restart the KinoBottle.
More information on http://support.kinomap.com