user’s manual n10

93
http://www.iriver.com User’s Manual N10 Thank you for purchasing the product. Please read the manual carefully before use.

Upload: others

Post on 30-Oct-2021

7 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: User’s Manual N10

http://www.iriver.com

User’s ManualN10

Thank you for purchasing the product. Please read the manual carefully before use.

Page 2: User’s Manual N10

I Quick Start I

Turning on/off the Player 2Listening to music 2

Recording 3Charging the Player 4

Chapter

1

Page 3: User’s Manual N10

2

Quick Start

Turning on/off the PlayerQuick Start

Playing Music

Turning on the playerPress the PLAY/STOP button to turn the player on.

I

Press and hold

The player will power off after a period of time with no-activity (not playing music, etc.). Please see Page 46 to adjust this setting.

1

Selecting track: Selects the previous track.

: Selects the next track.

I3

Controlling volume+ : Increases volume

- : Decreases volume

I4

Playing musicPress the PLAY/STOP button toplay music.

I2

Connecting earphonesConnect the earphones as shown above.

Type A Type B

I1Turning off the playerPress and hold the PLAY/STOPbutton to turn the player off.

I2

Press the PLAY/STOP button again to play music.

I

Page 4: User’s Manual N10

3

I1 Quick S

tart IQuick Start

Recording Voice

Starting recordingPress the MENU button.

- Recording will be started.

4

Finishing recordingPress the MENU button again.

- Recording will be finished.

5

Listening to recording filePress the PLAY/STOP button afterstopping recording to play the recorded file.

I

I

I

6

Quick Start

Recording Voice

Navigating menuPress and hold the MENU button.

Press and hold I1

Recording Stand ByPress the PLAY/STOP button.

- The player will be in standby mode with displaying RECORD READY on LCD.

I3

Selecting Voice RecordingPress the / button to select [Voice].

I2

Page 5: User’s Manual N10

4

Quick Start Guide

Charging the Player

Charging with USB cable.Push the "PUSH OPEN" on the back of your player to disconnect its cap as shown below.Connect the USB port and PC with USB cable to charge battery.

The player will charge automatically when the player is connected to the PC.

I1

l Player will charge even when powered off.l Charging time: Approx. 1.5 hours (At full discharge, Stop mode)

Note ...

Page 6: User’s Manual N10

I Getting started I

Greetings 6Copyright and Certifications 6Trademarks and Disclaims 7Features 9

Accessories 9Locating the Controls 10LCD Display 11

Chapter

2

Page 7: User’s Manual N10

6

Getting started

GreetingsGetting started

Copyright and Certifications

Thank your for your iriver purchase.Also, welcome to the world of N10, the market-leading MP3 player.We are sure that the iriver's N10 player may sufficiently satisfy you and make your life moreenjoyable. This user's manual is provided to help you safely use the product. Please read this manual carefully before using it. Thank you.

I

http://www.iriver.co.krThe iriver's home page provides the overview of company and products, other related information,and answers to common questions. Firmware and software updates are also available as well asthe most recent information about your iriver product.

You may get useful information from "User's Forum" and FAQ. Register your ID and get anyappropriate online customer support. Also, you can get newsletter such as newly announced product,firmware upgrade, various promotion events via email.

I

Copyright

iriver Limited has all the rights of the patent, trademark, literary property and intellectual property relatedto this manual. You may not copy or reproduce any part of this manual unless authorized by iriver Limited.You can be punished by using any part of this manual illegally.

The software, audio and video which have an intellectual property are protected by copyright andinternational laws. It is user s responsibilities when he/she reproduce or distribute the contents createdby this product.

The companies, institutions, products, people and events used in examples are not real data. We don'thave any intension to be related with any companies, institutions, products, people and events throughthis manual and should not draw inferences. Users are responsible for observing the copyrights andintellectual properties.

© 1999~2004 iriver Limited, All rights reserved.Certifications

CE, FCC, MIC

I

I

Page 8: User’s Manual N10

7

I2 Getting started

IGetting started

Trademarks and Limited Liability

TrademarksWindows, Windows 98 SE, Windows ME, Windows 2000, Windows XP andWindows Media Player are registered trademarks of Microsoft Corp.

I

Limited LiabilityNeither the Manufacturer, importers nor dealers is responsible for any accidental damage includingbodily injury or any damage resulting from misuse or unsuitable operation by you.

The information on this manual is prepared with the current product specifications.The manufacturer, iriver Limited, is adding new features to the product and may persistentlyapply new technologies hereafter.

All standards may be changed at any time without notice.

I

Note ...

Page 9: User’s Manual N10

Getting started

Features

16 Gray Organic EL Display Supporting Multiple LanguagesN10 series comes with 16 gray OELD which can support multiple languages (40 languages).

I

Necklace with Integrated EarphonesI

Direct Charging via USBI

6 Preset EQ : Normal, Rock, Jazz, Classic, U Bass, MetalI

Xtreme EQ and Xtreme 3DCustomize your own EQ with Xtreme EQ and enhance bass and surround sound with Xtreme 3D.

I

Voice RecordingVoice record level is automatically controlled by AGC function.

I

Firmware UpgradeProvides the latest updated features via firmware upgrade.

I

Supports 100 folders total and up to 260 files at one timeI

Simple navigation makes it easy to find any songI

8

Page 10: User’s Manual N10

9

I2 Getting started

I

Main unitI

Getting started

Accessories Accessories subject to change without notice and may vary from image shown.

Earphone CoversI Mini USB Adapter /USB Cable

I

Installation CDI User Manual/Warranty Card/Quick Start Guide

I

Type BNecklace, cap

IType ANecklace style earphone

I

Hold connection part of necklace and push itinto the direction of arrow.

Hold the end of strap and pull it out to thedirection of arrow to separate the connectionpart.

Put the separated end into the neck strap holeon the player. The connected part will bereleased.

Assemble the earphone in the opposite orderafter putting the strap in the connection hole ofthe player.

Page 11: User’s Manual N10

Getting started

Locating the Controls Actual player may differ slightly from images below.

Front View

Type A Type B

I1 Rear ViewI2

OEL Screen

USB ConnectionPort

OEL Screen

USB ConnectionPort

Eject button

Cap

Getting started

Locating the Controls Actual player may differ slightly from images below.

Front ViewI1 Rear ViewI2

Earphone jack

Neck strap

Eject button

Cap

10

Page 12: User’s Manual N10

11

I2 Getting started

IGetting started

Locating the Controls The images below can be different from the product.

Left sideI1 Right sideI2

PLAY / STOP / TURNON / TURN OFFbutton

Long : MENU buttonShort : A-B Repeat

Volume – / Move tothe Down button

Volume + / Move tothe Up button

Next Track/Move to the Left button

Previous Track/Move to the Right button

Getting started

LCD Display

1 6

7

2

3

4

5

MUSIC modeI11 Clock2 Progress Bar3 Playback Mode / Status4 Folder Name5 Music Title6 Battery Indicatorr7 Play Time8 Volume Level9 EQ / File Format / Bit Rate /

Sample Rate

Page 13: User’s Manual N10

Getting started

LCD Display

IRM (iriver Rights Management)iriver Rights Management is a digital music format.Please visit our web site for details about this music format.

File formatI

ASF WMA MP3 IRM

Getting started

LCD Display

RECORD mode[Before Recording]

[After Recording]

I21 Recording Status2 Recording Icon3 Status Bar4 Number of Files5 Recording Time6 Remaining Time

7 Recording Status Bar8 Recording Folder Name9 Recording File Name12

Page 14: User’s Manual N10

I Basic Operation I

PC Software Installation 14Connecting to the PC 17Installation of "New Hardware" 18Safely Removing the Player from the PC 19Operate the Software 20Learning the Basic Function 22Toolbar Menu 22File Managing Tools 23File Menu 23View Menu 24Tools 24

Windows 25Help 25Downloading from the PC 26Basic Operation 27Navigation 27MP3 28Voice Recording 29Menu Setting 31Deleting File or Folder 32

Chapter

3

Page 15: User’s Manual N10

14

Basic Functions

PC Software Installation Install the software before connecting the player to PC.

On inserting software installation CD into CD-ROM drive located in PC, the following screen will appear.

- IIf the installation program does not automatically run in a few seconds, click My Computer icon to browse the CD-ROM drive and run SETUP.EXE manually.

- The software installation CD contains :Device DriverManager Program for PCManager Program for Mac

1

System Requirements (Windows)

Pentium 133Mhz or higher CD-ROM driveUSB port 10MB of free hard disk space or higherWindows 98 SE/ME/2000/XP

Basic Operation

PC Software Installation Install the software before connecting the player to PC.

- The software enables you to save MP3 and other format files into your player.

- For Microsoft Windows 2000, login as Administrator to install the software.

- For Microsoft Windows 2000 user, login as Administrator to install the software.

Page 16: User’s Manual N10

15

I3 Basic O

perationI

Basic Operation

PC Software Installation Install software before connecting the player to PC.

Insert the installation CD into the CD-ROMdrive. Installation starts automatically.1 Select a language for iriver Music Manager and

Click "Next" after selecting the language to install.2

Basic Operation

PC Software Installation

Click "Next" to install iriver Music Manager.3 Select a folder to install iriver Music Managerand click [OK]. Select the folder to install. Click "Next"

4

Page 17: User’s Manual N10

16

Basic Operation

PC Software InstallationBasic Operation

PC Software Installation

Click “Next” to continue the installation.5 Click “Install” to proceed.6 Click “Finish” when installation is complete.7

Page 18: User’s Manual N10

17

I3 Basic O

perationI

Basic Operation

Connecting to the PC

Push the "PUSH OPEN" on the back of your player to disconnect its cap as shown below.Connect the USB port and PC with USB cable.1

Basic Operation

Connecting to the PC

"USB CONNECTED" will appear on the LCD screen of the player.2

Connect the USB cable to the PC after playback stops to avoid errors.

Page 19: User’s Manual N10

18

Basic Operation

Installation of "New Hardware"

After connecting the player to your PC, "Found New Hardware" screen is displayed.1 Information screen is displayed on the PC. New hardware is installed successfully and ready to use.2

l New hardware installation process starts after installing iriver Music Manager program.

Basic Operation

Installation of "New Hardware"

Page 20: User’s Manual N10

19

I3 Basic O

perationI

Right-click the "Safely Remove Hardware" icon in the taskbar.1

Basic Operation

Safely Removing the Player from the PCBasic Operation

Safely Removing the Player from the PCIf abnormally removed from PC, the player may be damaged or cause serious malfunction.

Select the device to remove and click “Stop”.2

Page 21: User’s Manual N10

20

Click the"OK" after confirming thehardware to remove.3 Click the "Close" after confirming the Safely Remove

Hardware message. (Windows XP)4

Basic Operation

Safely Removing the Player from the PCBasic Operation

Operate the Software

1 Double click the iriver Music Manager icon. iriver Music Manager version installed isdisplayed.2

Page 22: User’s Manual N10

21

I3 Basic O

perationI

Basic Operation

Operate the Software

Initial iriver Music Manager window.3

The right side of iriver Music Manager willdisplay the contents of the your player.If nothing is displayed in the right screen,please be sure that the player is properlyconnected to the USB cable and to the PC.

It may be necessary to disconnect the playerfrom the cable and reconnect it to activate theright side of iriver Music Manager.

Note ...

Page 23: User’s Manual N10

22

Basic Operation - Screen Details

Learning the Basic FunctionBasic Operation - Screen Details

Toolbar Menu1 Wizard 2 Image Viewer 3 Firmware Upgrade4 File Managing Tools5 Detail information on

selected music6 Play the selected music with

Windows OS preferred player7 Play selected music file.

(Uses system default player).8 Remaining capacity of the player9 Turner Setting10 Format Player11 iriver Home Page Link

File Transfer WizardTo transfer files from PC to the player.

File Conversion WizardTo convert recorded REC files to a formatyour PC can use.

Audio CD Extracting WizardTo extract the file with OGG format from Audio CD.

Firmware UpgradeTo upgrade Firmware.

N10 does not support Audio CD Extracting Wizard, Image Viewer, and Tuner Setting functions.N10 does not support Audio CD Extracting Wizard,Image Viewer, and Tuner Setting functions.

Page 24: User’s Manual N10

23

I3 Basic O

perationI

Basic Operation - Screen Details

File Managing Tools

SearchSearches for file(s) or folder(s) within current window.

Move to Parent Folder Moves currently selected folder toparent folder.

RefreshRefreshes information on file(s) orfolder(s) within current window.

ViewTo change how to display the selected folder.

New FolderMakes a new folder.

PropertiesDisplays detail information on currentlyselected file or folder.

Basic Operation - Screen Details

File Menu

New FolderTo make a new folder on the PC or the player.

DeleteTo delete the selected folder or files on the PC or the player.

RenameTo rename the selected file or folder on the PC.

PropertiesTo display detailed information about the folder or file selected.

ExitTo exit the iriver Music Manager.

Page 25: User’s Manual N10

24

Basic Operation - Screen Details

View Menu

<Large Icons> <Small Icons> <List> <Details>

Basic Operation - Screen Details

Tools

File Transfer WizardTo transfer files from PC to the player.

File Conversion WizardTo convert recorded REC files to a format your PC can use.

Upgrade Firmware To upgrade firmware.

N10 does not support CD Extraction Wizard, Image Viewer, and Turner Setting functions.

Page 26: User’s Manual N10

25

I3 Basic O

perationI

Basic Operation - Screen Details

Windows

Align HorizontallyTo display the PC and player's windows horizontally.

Align VerticallyTo display the PC and player's windows vertically.

Basic Operation - Screen Details

Help

About iriver Music ManagerTo confirm the version of Manager.

iriver Music Manager HelpOpens iriver Manager Help.

Firmware Information To see the information about your player.

iriver HomepageTo connect the iriver homepage.

Page 27: User’s Manual N10

26

Basic Operation

Downloading from the PC

Select the folders or files on the PC to transfer to the player.Drag and drop to move folders or files to the desired location on the player.1

Basic Operation

Downloading from the PC

Once the music files appear on the right side of iriver Music Manager, they are on your MP3 player.2

l Files with over 127 characters in the file name will not be transferred.

l Files with total path and filename over 512 characters will not be transferred.

l The ROOT folder is limited to 1024 files and folders total. Subfolders do not have a limit tothe number of files.

Page 28: User’s Manual N10

Press the / switch to select a mode.

- Navi - MP3 - Voice - Setup

27

I3 Basic O

perationI

Basic Operation

Basic Operation

MenuPress and hold the MENU button.

Press and hold I1

2

Press the MENU button to confirm.- MP3 function is selected.

3

Basic Operation

Navigation Navigation function allows you to search music.

NavigationPress and hold the MENU button.

Press and hold I1

Push the / switch to select [Navi]and press the MENU button.

2

Select folder and file.Press the <+ / - , / > button tomove to the folder and file.

+ : To move up. - : To move down.

: To move to the upper folder. : To move to the lower folder.

I3 +

-

Page 29: User’s Manual N10

28

Basic Operation

Navigation

Playing selected file(s)To select the track, press thePLAY/STOP or button.

I4

Basic Operation

MP3

Press and hold the MENU button.Press and hold 1

Push the / switch to select [MP3].2

Press the MENU or PLAY/STOP button toplay music.

3

Page 30: User’s Manual N10

29

I3 Basic O

perationI

Press and hold

Basic Operation

MP3

Selecting previous/next songPress the / button while playing song.

: To select the previous song.

: To select the next song.

I4

Rewind/Fast-ForwardPress and hold the / buttonwhile playing song.

: Rewinds the playing song.

: Fast-forwards the playing song.

I

I

5

Adjusting the volume.Press the + / - button to control volume.

+ : Increases volume

- : Decreases volume

6

Basic Operation

Voice Recording

Press and hold the MENU button.Press and hold 1

Push the / switch to select [Voice].2

Pres the MENU or PLAY/STOP button toenter the RECORD mode.(The recorder will be in standby mode.)

3

Page 31: User’s Manual N10

30

Basic Operation

Voice Recording

To stop recordingPress the MENU button.

- After stopping a recording, starting again willcreate a new voice file.

I6

7 Listening to recorded filePress the <PLAY/STOP> button afterstopping recording to play the recorded file.

I

Basic Operation

Voice Recording

Recording voicePress the MENU button again to beginrecording.

I

I

4

To pause voice recordingPress the PLAY/STOP button to pauserecording.

- Time indicator will blink to show that recording is paused.

Press the PLAY/STOP button again to resume recording.

- Pausing the recording will not create a new file,recording will be added to the current recording.

5

Page 32: User’s Manual N10

31

I3 Basic O

perationI

l The recorded file is saved as VOICE000.REC in the VOICE folder.l If "00:00:00" is displayed, the player's memory is full.

To record, delete files and/or folders on the player to make some space available.(To delete: Refer to page 32, Deleting File or Folder)

l The player cannot record when the memory is full or the battery is low.l Keep the player far away enough from the source to avoid distortion in the recording.l Recorded REC files can be converted to MP3 files using iriver Music Manager.

(Refer to page 70)

For more information on Menu Setting, refer to page 40 ~ 42.

Basic Operation

Menu Setting

Press and hold the MENU button.Press and hold 1

Push the / switch to select [Setup].2

Pres the MENU or PLAY/STOP button toenter the SETUP.

3

Page 33: User’s Manual N10

32

Basic Operation

Deleting File or Folder

Select the folder and file to delete using the + / - or / button.

3

Select [YES] using the / buttonand press the PLAY/STOP button to finishDelete process.

5

Press the MENU button. - "FILE DELETE ARE YOU SURE ?" or

"FOLDER DELETE ARE YOU SURE ?" is displayed.

4

l You cannot delete a file which is currently playing. l Only empty folders can be deleted, delete all files in a folder before deleting that folder.

Press and hold

Basic Operation

Deleting File or Folder

Press the PLAY/STOP button to stopmusic playback.

- You cannot delete the file or folder whichis currently playing.

1

Press and hold the MENU button todisplay function control. Then, highlight [Navi] and press the MENUbutton again to display the NAVIGATIONSCREEN.

2

Page 34: User’s Manual N10

I Convenient Function I

Play Mode 34A-B Repeat 36EQ 36

Chapter

4

Page 35: User’s Manual N10

34

Changing Play modePress and hold the MENU button todisplay function control.

I1

Press / to select [Setup] thenpress the MENU button.

2

Convenient Function

Play ModeConvenient Function

Play Mode

Play Mode is set under [Setup] - [Mode]. Press the / button toselect [Mode] and press the MENU button.

3

Press the + / - button to select the desired play mode.

4

Once the play mode has beenhighlighted press the MENUbutton to finish setting this mode.

5

Press and hold

Page 36: User’s Manual N10

35

I4 Convenient Function

IConvenient Function

Play Mode

REPEATI

: Plays the tracks saved in memory in order and stop after playing the last track.

: Play a single track repeatedly.

: Play all tracks in the folder and stop.

: Play all tracks in the folder repeatedly.

: Play all tracks in the player repeatedly.

OFF

Convenient Function

Play Mode

SHUFFLEI

: Randomly play all tracks in the folder.

: Randomly play all tracks in the folder and stop.

: Randomly play all tracks in the player and stop.

: Randomly play all tracks in the player repeatedly.

Page 37: User’s Manual N10

36

Convenient Function

A-B Repeat Repeat a selected interval.

Selecting point A Press the MENU button once to select thebeginning <A> point.

I1

Selecting point BPress the MENU button again to select theending <B> point.

I2Setting EQ functionPress and hold the MENU button to display function control.

I1

Press / to select [Setup] thenpress the MENU button.

2

Convenient Function

EQ

The EQ is set in the [Setup] - [Sound] menu.

Press and hold

Page 38: User’s Manual N10

37

I4 Convenient Function

IConvenient Function

EQ

Press the / button to select [Sound] and press theMENU button to enter theSound menu.

3

Press / to select [EQ Select] and press the Menu button.

4

l You can select among ROCK, JAZZ, CLASSIC, U BASS, METAL, XTRMEQ, XTRM3D, NORMAL.

Convenient Function

EQ

Select

Once the EQ mode has beenhighlighted press the MENUbutton to finish setting this mode.

6

l You can select among ROCK, JAZZ, CLASSIC, U BASS, METAL, XTRMEQ,XTRM3D, NORMAL. (see page 52 ~ 53).

Press the + / - button to select the desired EQ mode.

5

Page 39: User’s Manual N10
Page 40: User’s Manual N10

I Menu Setting I

Configuration 40Selecting Setup Menu 41Entering Submenu 41Function Details 42Exiting Menu 42

Menu-General 43Menu-Display 44Menu-Timer 46Menu-Function 47Menu-Mode 50Menu-Sound 52

Chapter

5

Page 41: User’s Manual N10

40

Menu

Configuration

GENERAL

RESUMELANGUAGELOAD DEFAULT

I DISPLAY

BACKLIGHTLCD CONTRASTSCREEN SAVERSCROLL SPEEDTAG INFORMATIONPLAY TIME INFO

I TIMER

SLEEP POWER OFFSTOP POWER OFFSET TIMESET ALARM

I CONTROL

FAST SKIPFF/RW SCAN SPEEDVOICE RECORDINGMODEVOICE AUTO DETECTPLAYBACK SPEED

I MODE

PLAY MODEINTROSTUDYNAME

I SOUND

EQ SELECTXtreme EQXtreme 3DDBE SETTING3D EQ SETTINGSOUND BALANCEEQ LIMITBEEP VOLUMESOUND FADE IN

I

Page 42: User’s Manual N10

Switching MenuPress / to cyclethrough the six main menus.Press MENU or PLAY/STOP toenter any of them main menus.

I5 Menu I

Menu

Entering SubmenuMenu

Selecting Setup Menu

Displaying MENU SETTING screenPress and hold the MENU button, andPress / to select [Setup] andpress the MENU button.

Press or to select [Setup] andpress the MENU button.

Press and hold I

I

1

I3

2

Displaying submenuSelect the desired menu and press theMENU button to view its sub-menu.

I1

Switching submenuPress + / - to move up and down thesub-menu.+ : Moves to previous submenu

- : Moves to next submenu

I2

41

Page 43: User’s Manual N10

Menu

Exiting Menu

Exiting submenuOnce the desired setting is chosen, press the PLAY/STOP button to exit back to theprevious menu and save the current setting.

I1

Exiting main menuPress the PLAY/STOP button again toexit the current sub-menu.

I2

Menu

Function Details

Display function detailsSelect the desired function from thesub-menu and press MENU button todisplay that functions details.

I1

Changing settingPress the + / - button to cycle throughall the setting options.

I2

42

Page 44: User’s Manual N10

I5 Menu I

Menu

Menu-General

RESUMEON : Playback resumes from the previous location in a song

when the player is stopped or powered off.

OFF : Playback begins from the first track after the player isstopped or powered off.

I1

Menu

Menu-General

LANGUAGESupports 40 languages.Song title and ID3 tag information is dependent on the versionsof the PC operating system that was used to create it.

- For example, if an MP3 file is created in a English version of Windows,the language setting should be English for the proper title display.)

I2

LOAD DEFAULTInitialize menus to the original factory settings.

Press the <MENU> button and select [Load Default] menu.Press the < > button and select [YES].Press the <PLAY/STOP> button and select [YES] to initialize allsettings.

I3

43

Page 45: User’s Manual N10

Menu

MENU-Display

Back-LightYou can adjust the time that the Backlight stays on.Sec : The backlight stays on from 3 to 30 seconds.

Min : The backlight stays on from 1 to 30 minutes.

Always: The backlight will remain on while player is powered on.

Press the <MENU> button to set Sec/Min/Always.

I1

Menu

MENU-Display

LCD CONTRASTAdjust LCD contrast by setting 0 ~ 40.

I2

SCREEN SAVERA graphic will display on the LCD screen of the player after aset amount of time during music playback.Activation time can be set from 0 (off) to 180 minutes.

I3

44

Page 46: User’s Manual N10

45

I5 Menu I

Menu

MENU-Display

SCROLL SPEEDAdjust scroll speed by 1x/2x/4x/VERTICAL/HORIZONTAL.

- VERTICAL : The scroll goes up and down.

- HORIZONTAL : The scroll goes from left to the right.

I4

TAG INFORMATIONOn : Display track with ID3 tag information.Off : Display track with file name.

- File name will be displayed by default for songs with noID3 information

I5

Menu

MENU-Display

PLAY TIME INFONormal : display elapsed time.

Remaining : display remaining time.

Time display may not be accurate for files encoded inVariable Bit Rate formats.

I6

Page 47: User’s Manual N10

Menu

MENU-Timer

SLEEP POWER OFFAutomatically turns the power off after a fixed time. (Time rangecan be set from 0 to 180 minutes by one minute increments.)Use the < / > switch to adjust time.Set BEEP ON/ OFF by pressing the <MENU>button.BEEP ON : A beep sound will play 1 minute before power off.BEEP OFF : No beep sound is played.

- Once powered off, the sleep timer will reset to 0.

I1

Menu

MENU-Timer

STOP POWER OFFThe player will power off after a specific time of inactivity(not playing music, recording, etc.).

1 - 60 minutes in 1 minute increments.

I2

Set TimeSet the current date and time for the player.

I3

46

Page 48: User’s Manual N10

47

I5 Menu I

Menu

MENU-Timer

SET ALARMThe Alarm setting will power on the player at a specific timeand play though the headphones.

Press < / > to select each item then +/- to adjust each.

DAY : Alarm rings at the set time of the set day repeatedly.

ALL : Alarm rings at the set time everyday.

I4

Menu

MENU-Control

FAST SKIP SKIPOFF : Skip doesn’t activate.

10 : Skip 10 tracks at time.

DIRECTORY : Skip to previous or next folder.

I1

Page 49: User’s Manual N10

Menu

MENU-Control

FAST SKIP SCAN SPEEDYou can set fast scan speed into 1X / 2X / 4X / 6X,

I2

Menu

MENU-Control

VOICE RECORDING MODEYou can adjust recording quality when recording voice.

AGC ON : When recording voice, the recording level isautomatically controlled and recordings from longdistances are enhanced.

AGC OFF : AGC(Automatic Gain Control) not activated.

QUALITY : Controls voice recording quality as quality.

I3

48

Page 50: User’s Manual N10

49

I5 Menu I

Menu

MENU-Control

VOICE AUTO DETECTThe voice recording mode will automatically pause duringsilence. This is useful for recording over a long period oftime to save memory.

OFF : Voice Auto Detection is disabled.

DETECTION LEVEL : Set the relative level of sound needed toactivate the recorder. (Level 1- Level 10).

Record pause time : Set the number of seconds of silence to(second slider) record before pausing. (1-10 sec)

I4

Menu

MENU-Control

PLAYBACK SPEEDYou can set the playback speed for currentlyplaying track to "slow" or "fast" from -9 to +9 speed level.

-9 : Very slow

0 : Normal

+9 : Very fast

I5

Page 51: User’s Manual N10

Menu

MENU-ModeMenu

MENU-Mode

REPEAT/SHUFFLESet the desired REPEAT/SHUFFLE play mode. Use +/- to select the mode and press MENU button tosave your selection. (Refer to page 35 for a description of each mode.)

I1

INTROOFF : Disables INTRO.

ON : Plays the beginning 10 seconds of each track.

HIGHLIGHT : Plays 10 seconds from 1 minute into each track insequential order.

I2

STUDYWhile playing, short slide of the < / > lever will skip thecurrent track set time ahead or back.OFF : Study Mode is disabled.The range is 1~60 seconds.

I3

50

Page 52: User’s Manual N10

51

I5 Menu I

Menu

MENU-Mode

NAMEYou can input your name or custom text. The saved text is displayed when playback stops.

I4Select Character

i r i ve

Press and hold

1

Select character3

Move cursor2

Delete character4

Change Character Set5

Save and Exit6

Press and hold

Page 53: User’s Manual N10

Menu

MENU-Sound

1. Select the frequency.

3. Save the setting and exit.

Menu

MENU-Sound

How to set Xtreme EQI

52

2. Adjust the level.

EQ SELECTSelect EQ type.Use the / or + / - button to select EQ type andpress the “MENU” button to set it.

I1

Xtreme EQYou can adjust the sound to your preference.There are 5 band frequency steps, set from -15dB to +15dBby 3dB step.

Xtreme 3DDBE 설정3D EQ 설정

Xtreme EQI2

Page 54: User’s Manual N10

53

I5 Menu I

Menu

MENU-Sound

Xtreme 3DYou can adjust the level of 3D sound (minimum, Natural, andMaximum). You can extend 3D sound by selecting Bass Boostor 3D EQ. You can also adjust the level of 3D sound with the

/ (or +,- ) lever.Select DBE or 3D EQ with the <MENU> button.

I3

DBE SETTINGYou can select the Bass Center Band level from Band 1 to 4.You can also set the Bass Boost gain from 0 dB to 15dB by3dB step.DBE (Dynamic Bass Enhancement) enhances Low & Middlefrequencies and only operates when using Xtreme 3D.

I4

Menu

MENU-Sound

3D EQ SETTINGYou can adjust the sound to your preference.There are 5 band frequency steps, set from -15dB to +15dB by3dB step.

I5

SOUND BALANCEBalance your sound to the right or left or keep it in the centeraccording to your preference. When Sound Balance bar ismoved to L (Left, 20), the sound outputs at the left earphone.When the lever is moved to R (Right, 20) the sound outputs atthe right earphone.The default value is 0 and the sound outputs the same level atboth earphones.

I6

Page 55: User’s Manual N10

Menu

MENU-Sound

EQ LIMITON : Limit the control of equalizer frequency to prevent

distortion of sound.

OFF : You can enjoy the original sound though distortion ofsound may occur.

I7

BEEP VOLUMESet beep volume “ON/OFF” or level.Set to "0" for OFF.

I8

Menu

MENU-Sound

SOUND FADE INWhen activated, volume increases gradually at playback modeto prevent the sudden loudness.

I9

54

Page 56: User’s Manual N10

I Using iriver Music Manager I

Managing File/Folder 56Views 66Wizard 68Performance Maintenance 74Additional Features 76Using Help 77

iriver Manager for Mac OS 80

Chapter

6

Page 57: User’s Manual N10

56

Using iriver Music Manager - Managing File/Folder

Making a New Folder on the PC

Click the "New Folder" icon or select"File-New folder" in the file menu to makea new folder.

1 A new folder is created.Type the name in the new folder and press“Enter”.

2

Using iriver Music Manager - Managing File/Folder

Making a New Folder on the Player

Click the "New Folder" icon or select"File-New folder" in the file menu to makea new folder.

1 A new folder is created.Type the name in the new folder and press“Enter”.

Only 8 levels of subfolders are allowed,beginning with the Root (\) folder.

2

Page 58: User’s Manual N10

57

I6 Using iM

MI

Using iriver Music Manager - Managing File/Folder

Deleting Folders or Files from the PC

Select the files or folders to delete.1 Select File - Delete in the file menu to deletefiles.2

Using iriver Music Manager - Managing File/Folder

Deleting Folders or Files from the PC

Click "Yes" on the alert display to delete.3 Files are deleted.4

Page 59: User’s Manual N10

58

Using iriver Music Manager - Managing File/Folder

Deleting Folders or Files from the Player

Select File - Delete in the file menu to deletefiles.2Select the files or folders to delete.1

Using iriver Music Manager - Managing File/Folder

Deleting Folders or Files from the Player

Click "OK" on the alert display to delete.3 Files are deleted.4

Page 60: User’s Manual N10

59

I6 Using iM

MI

Using iriver Music Manager - Managing File/Folder

Renaming Folder or File on the PC

Select file or folder to rename.1 After selecting File - Rename, type the newname and press “Enter”.2

Using iriver Music Manager - Managing File/Folder

Renaming Folder or File on the Player

Select file or folder to rename.1 After selecting File - Rename, type the newname and press “Enter”.2

You cannot change the extension of a file.

Page 61: User’s Manual N10

60

Using iriver Music Manager - Managing File/Folder

To view the Properties of a File (PC)

Select a file or folder to view.1 Select “File” - “Properties” in the file menu to view the properties of the file.2

Using iriver Music Manager - Managing File/Folder

To view PC Properties

The properties of the selected file are displayed.

<Properties of selected file> <Properties of selected folder>

3

Page 62: User’s Manual N10

61

I6 Using iM

MI

Using iriver Music Manager - Managing File/Folder

To view the Properties of a File (Player)

Select a file or folder to view.1 Select “File” - “Properties” in the file menu to view the properties of the file.2

Using iriver Music Manager - Managing File/Folder

To view the Properties of a File (Player)

The properties of the selected file are displayed.

<Properties of selected folder>

3

Page 63: User’s Manual N10

62

Using iriver Music Manager - Managing File/Folder

Searching for Music Files

Click “Search” icon on the PC window.1 Select the drive or folder to search.2

Using iriver Music Manager - Managing File/Folder

Searching for Music Files

Click “Search” after typing the searching condition.3 The search results are displayed.

Click “Close” button to finish.4

Search interface may look different depending on your Windows version.

Page 64: User’s Manual N10

63

I6 Using iM

MI

Using iriver Music Manager - Managing File/Folder

Uploading to the PC

Select the folders or files on the player to transfer to the PC. Click and drag to move folders or files to the desired location on the PC.

Upload is in processing.1

Using iriver Music Manager - Managing File/Folder

Uploading to the PC

Upload is completed.2

IMusic files (MP3, WMA, ASF) cannot be uploaded from the player to the PC in accordancewith current copyright guidelines.

IYou can upload pictures, recorded files,or any data files to your PC.

IMP3, WMA or ASF files may not be transferred toyour PC from the player.

Page 65: User’s Manual N10

64

Using iriver Music Manager - Managing File/Folder

Changing the Position of Folders or Files on the Player

Drag and drop to move a folder or file to the desired location.1

IYou may only move one file or folder at a time.

IYou cannot move files or folders to another folder.

IClick [Name] in player window to sort files by name.

Using iriver Music Manager - Managing File/Folder

Moving to the Upper Folder (PC and Player)

Click the move to “upper folder” icon in the menu bar of the iriver Music Manager.1

<Move to the upper folder on the PC> <Move to the upper folder on the player>

Page 66: User’s Manual N10

65

I6 Using iM

MI

Using iriver Music Manager - Managing File/Folder

Refresh (PC and Player)

Click the “Refresh” icon to display the contents of the PC or the player.1

<Refresh to the current folder on the PC.> <Refresh to the current folder on the player.>

Note ...

Page 67: User’s Manual N10

66

Using iriver Music Manager - Views

Windows

Select “Align Horizontally” in the Windows menu to display the PC and player s windows horizontally.1

Using iriver Music Manager - Views

Windows

Select “Align Vertically” in the Windows menu to display the PC and player windows Vertically.2

Page 68: User’s Manual N10

67

I6 Using iM

MI

Using iriver Music Manager - Views

Windows

To make the PC side of iriver Manager active, click Window - PC3

Using iriver Music Manager - Views

Windows

To make the player side of iriver Manager active, click Window - N10(: model name)v3.15(Connected)(: firmware version)4

Page 69: User’s Manual N10

68

Using iriver Music Manager - Wizard

File Transfer Wizard The file transfer wizard can help guide you through the process of copying songs to your player.

Click “ Tools-File Transfer Wizard ” on the menu or “ File Transfer Wizard ” icon on the Toolbar menu files or folders.1

Using iriver Music Manager - Wizard

File Transfer Wizard

File Transfer Wizard window is displayed on the PC. Click “ Add Folder ” or “ Add File ” after selecting folder or file to transfer.2

Page 70: User’s Manual N10

69

I6 Using iM

MI

Using iriver Music Manager - Wizard

File Transfer Wizard

Click “ Next ” after selecting files or folders.3 Click “ Next ” after selecting the folder to be transferred to the player or creating a folder on the player.

4

Selecting the location to save

Creating a new folder

Using iriver Music Manager - Wizard

File Transfer Wizard

File transferring is in processing. Click "Finish" after completing file transferring.5

Page 71: User’s Manual N10

70

Using iriver Music Manager - Wizard

File Conversion Wizard

Click “ Tools-File Conversion Wizard ”on the menu or “ File Conversion Wizard ”icon on the Toolbar menu files to convertREC files to MP3 format.

1 File Conversion Wizard window is displayed. Click “ Select File ” to select the file to convert.

2

Using iriver Music Manager - Wizard

File Conversion Wizard

Click “Open” and “Next” after selecting files.3 To cancel the file conversion, click “Delete” afterselecting files to cancel.4

IYou must first upload REC files from the player to your PC before converting them.

Page 72: User’s Manual N10

71

I6 Using iM

MI

Using iriver Music Manager - Wizard

File Conversion Wizard

Click “ Next ” after confirming the selected files.5 Click “ Change ” to change the location to

save after converting.6

Using iriver Music Manager - Wizard

File Conversion Wizard

Click “ OK ” after selecting the location to save after converting.7 Click “ Rename ” after selecting the file

to be renamed.8

Page 73: User’s Manual N10

72

Using iriver Music Manager - Wizard

File Conversion Wizard

Click “ Next ” after typing new file name.9 Click “ OK ” to confirm it.10

Using iriver Music Manager - Wizard

File Conversion Wizard

Click “Next” after selecting whetherdeleting or not the original file.11 File converting is in processing.

Click “Finish” after completing file conversion.12

Page 74: User’s Manual N10

73

I6 Using iM

MI

1

Using iriver Music Manager - Performance Maintenance

Firmware Upgrade (Manual)

Visit www.iriver.com to download the latest firmware for your player. Unzip the downloaded firmware file and double click the EXE file. A file called N10.HEX will be created in the samefolder as the EXE file.

Using iriver Music Manager - Performance Maintenance

Firmware Upgrade (Manual)

Click “Tools-Firmware Upgrade” or “Firmware Upgrade” Icon on the Toolbox.2 Click “Upgrade”.3

Page 75: User’s Manual N10

74

Using iriver Music Manager - Performance Maintenance

Firmware Upgrade (Manual)

Locate and select the “N10.HEX” then click“Open”.4 The window below is displayed as the

firmware upgrade is in processing. Click [OK] after the player turns off.

5

IDo not disconnect the player from the PC or remove the battery from the player during the firmware upgrade process.

Using iriver Music Manager - Performance Maintenance

Format Format will erase all the files and folders in your player's memory.

Click the “format” icon on the Toolbox to format.1 The alert below is displayed. Click “OK” to initialize.2

Page 76: User’s Manual N10

75

I6 Using iM

MI

Using iriver Music Manager - Performance Maintenance

Format

Formatting is in processing. Formatting is completed. Click “OK”.43

Note ...

Page 77: User’s Manual N10

76

Using iriver Music Manager - Additional Features

Modifing ID3 tags

Click “Modify ID3 tags” icon after selecting aMP3 file .1 Click [Save].

Modifing of ID3 tags is completed. 2

Type taginformation.

You can only modify the tag information of MP3 files and only files that are onyour PC.

Using iriver Music Manager - Additional Features

Playing Music Files on the PC

Click “Musik Play” icon after selecting a file toplay.1 When you play a file, your default media player

will open and begin playing the selected song. 2

Page 78: User’s Manual N10

77

I6 Using iM

MI

Using iriver Music Manager - Using Help

iriver Music Manager Help

Click “Help - About iriver Music Manager ”.1 The version information of iriver Music Manageris displayed. Click “OK” to exit.2

Using iriver Music Manager - Using Help

iriver Music Manager Help

Click “Help - iriver Music Manager Help”in the menu.1 Help screen about how to use "iriver Music Manager"

program is displayed. Click head heading to read the details of the iriver Manager functions.

2

Page 79: User’s Manual N10

78

Using iriver Music Manager - Using Help

Printing iriver Music Manager Help

Click “Print” icon to print iriver MusicManager Help. Click “OK” after selecting therange to print.

1 Click “Print” after selecting the printer. Printing is started.2

Using iriver Music Manager - Using Help

Viewing Firmware Information

Select “Help-Firmware Information”in the menu.1 Information about Firmware is displayed.

Click “OK” to exit.2

Page 80: User’s Manual N10

79

I6 Using iM

MI

Using iriver Music Manager - Using Help

Connecting to iriver Website.

Click the Icon to connect to iriver Website.1

Note ...

Page 81: User’s Manual N10

80

Using iriver Music Manager

Mac Software Installation (Mac OS 9.2)

Copy the "MAC OS - OS 9 - iriver MUSIC MANAGER FOR MAC OS-9.BIN" file on the installation CD-ROM in the MAC-OS folder to your desktop.

1 Double click the "iriver MUSIC MANAGERFOR OS 9.BIN" file to extract the VISEinstallation file for iriver Music Manager.

2

Using iriver Music Manager

Mac Software Installation (Mac OS 9.2)

System Requirements (Mac)

Mac OS 9.2.2 or later Mac OS X 10.2 or later CarbonLib 1.6 or later

CarbonLib Update MethodOS X : Apple Menu - System Preferences - System - Software UpdateOS 9 : Control Panels - Software Update

Page 82: User’s Manual N10

81

I6 Using iM

MI

Using iriver Music Manager

Mac Software Installation (Mac OS 9.2)

Double click the VISE icon to begin theinstallation.3 Click "Install" after selecting the

folder to install.4

Using iriver Music Manager

Mac Software Installation (Mac OS X )

Double click the "MAC OS - OS X - iriverMusic Manager for OS X.dmg" in theMAC-OS folder on the installation CD-ROM." The “.dmg” file will mount a temporary"drive" icon called "iriver Music Manager”.

1 Open the iriver Music Manager "drive" and move theiriver Music Manger icon to your Dock or Desktop.Installation of iriver Music Manager for OS X iscompleted.

2

Page 83: User’s Manual N10

82

Using iriver Music Manager

Using iriver Music Manager on Mac

Adding new folderClick New Folder icon in iriver Music Manager.

I1 Refreshing PlayerClick “Refresh” icon to display thecontents of the player.

I2

Using iriver Music Manager

Connecting to a Mac

Connect player to your Mac, and then run iriver Music Manager icon on Desktop.1

Page 84: User’s Manual N10

83

I6 Using iM

MI

Using iriver Music Manager

Using iriver Music Manager on Mac

Deleting file or folderAfter selecting the files or folders to delete,click “Delete” icon to delete.

I3 Formatting PlayeFormat will erase all files in your player memory.Click the “Format” icon to format.

I4

Using iriver Music Manager

Using iriver Music Manager on Mac

Downloading from the MacAfter selecting the files or folders to download, drag and drop them to the iriver Music Manager screen.The selected songs will automatically download to the player.

I5

Drag &Drop

IFiles with a name over 127 English characters (double byte: 63 characters) will not transfer.

IFiles over 511 English characters (including path name and file names) will not transfer.

IThe ROOT folder is limited to 1024 files and folders total.Subfolders do not have a limit to the number of files.

Page 85: User’s Manual N10

84

Using iriver Music Manager

Using iriver Music Manager on Mac

Uploading to the MacAfter selecting the files or folders to upload, drag and drop them to the folder to upload on the Mac.

I6

Drag &Drop

l Music Files (MP3, WMA, ASF) can not be uploaded from the player to the Mac in accordance with current copyright guidelines.

l REC files will be automatically converted to WAV format when uploaded to your computer.

Using iriver Music Manager

Firmware Upgrade

Download the latest Firmware from our website. Click “File - Firmware Update” on the menu.1 Click “Open” after selecting file to update.2

Page 86: User’s Manual N10

85

I6 Using iM

MI

Note ...Using iriver Music Manager

Firmware Upgrade

While update is completed, the player is automatically turned off. 3

Page 87: User’s Manual N10
Page 88: User’s Manual N10

I Additional Information I

Precautions 88Troubleshooting 91

Specifications 92

Chapter

7

Page 89: User’s Manual N10

Additional Information - Safety and Warning

Precautions Be sure to read for your safety.

Additional Information - Safety and Warning

Precautions Be sure to read for your safety.

Do not place objects insidethe device.

Damage to your player mayresult from improper use.

Keep away from harshenvironments including humid,dusty, and smoky areas.

Do not place heavy objectson the device.

Damage to your player mayresult from improper use. Damage to your player may

result from improper use.

Avoid contact with water andother liquids and dryimmediately with a soft clothshould contact occur.

Damage to your player mayresult from improper use.

Do not use chemicals anddetergents since they deteriorateand peel off product's skin.

Damage to your player mayresult from improper use.

Do not use water or chemicalsto clean the player.Clean the surface with a softcloth.

Damage to your player mayresult from improper use.

88

Page 90: User’s Manual N10

I7 Additional Inform

ationI

Additional Information - Safety and Warning

Precautions Be sure to read for your safety.

Additional Information - Safety and Warning

Precautions Be sure to read for your safety.

Do not use excessive forceon the buttons or attempt todisassemble the device.

Damage to your player mayresult from improper use.

Do not drop or subject thedevice to impact.

Damage to your player mayresult from improper use.

Keep out of direct sunlight andextreme heat and cold.

Damage to your player mayresult from improper use.

Keep the player away fromstrong magnets.

Damage to your player mayresult from improper use.

Do not disassemble ormodify.

Damage to your player mayresult from improper use.

89

Page 91: User’s Manual N10

Included earphones includesoft covers for your comfort.They may be used with or without covers at your preference.

Keep headphones /earphones cords under controlat all times.

Additional Information - Safety and Warning

Precautions Be sure to read for your safety.

Reduce volume while walking,especially at pedestriancrosswalk.

Do not use headphone /earphones at high volume.Hearing experts advise againstlistening to continuous, loudand extended play.

Reduce volume or stop usingthe player if you experienceringing in your ears.Hearing experts advise againstlistening to continuous, loudand extended play.

Do not use at high volume forcontinuous listening.Hearing experts advise againstlistening to continuous, loudand extended play.

It may cause your injured.

Additional Information - Safety and Warning

Precautions Be sure to read for your safety.

90

Cords may get caught on avariety of objects and causedamage or injury.

Page 92: User’s Manual N10

I7 Additional Inform

ationI

91

Trouble Solution

No Power. Check if battery is charged.

No sound or distortionduring playback.

Check if volume is set to "0".

Check whether the plug is dirty. Clean the plug with a dry and soft

cloth.

Corrupted music files may make a static noise and the sound may cut

off. Listen to your files on the PC to see if they are corrupted.

Abnormal charactersin Screen.

Go to [Menu Setting] - [General Setting] - [Language] and checkif language is correctly selected. (refer to page 43)

Trouble Solution

Failed download ofMP3 file

Check if battery is charged.

Check if USB cable between PC and your player is correctly connected.

Player will not charge.

Battery may be fully changed. A fully charged battery will not accept additional charging.

Check if USB cable is correctly connected.

Additional Information

TroubleshootingAdditional Information

Troubleshooting

Page 93: User’s Manual N10

Additional Information

SpecificationsCategory Item Specifications

20 Hz ~ 20 KHz(L)18 mW + (R)18 mW (16Ohm) max. Volume90 dB(MP3)MPEG 1/2/2.5 Layer 3, WMA, ASF8 Kbps ~ 320 Kbps ID3 VI, ID3 V2 2.0, ID3 V2 3.0, ID 3 V2 4.016 Gray Organic EL Display40 Languages

Approx. 11 hours (128 kbps, MP3, Volume 20, EQ Normal, LCD off)Approx. 7 hours (192 kbps, MP3, Volume 20, EQ Xtreme 3D, After 30 min LCD off)27.2(W) x 49.8(D) x 13.3(H) mm (Body) 27.2(W) x 62.5(D) x 13.3(H) mm (type A - cap inclusion)22g (Body with Battery)28.5g (Body with Battery, type B - cap inclusion )Lithium Polymer battery-5 °C ~ 40 °C

Audio

File Type

Tag InfoDisplay

Language

Voice Recording

Max. PlaytimePlaytime (Normal Use)

Dimensions

Weight

BatteryOperational Temperature

Frequency RangeHeadphone OutputS/N RatioFile TypeBit Rate

Approx. 9:00 hrs(32kbps, 128 MB)

Approx. 18:00 hrs(32kbps, 256 MB)

Approx. 36:00 hrs(32kbps, 512 MB)

Note ...

92