CARTRIDGE ICE SHAVER

CARTRIDGE ICE SHAVERMODEL

USER’S MANUAL INDEX

HD12XFOR SAFETY…………………………1PART NAMES AND FUNCTIONS ……4HOW TO USE ………………………5CLEANING & MAINTENANCE ………9SPECIFICATIONS …………………12

TRANSFER (RE-SALE) OF MACHINE

Should you sell or give the machineto a 3rd party, make sure that this“OPERATION MANUAL” goes with it for safe and correct operation.

HD12X

● The following is the meanings of the markings and symbols used in this instruction manual.

Safety InstructionsSafety Instructions● To ensure the proper use of this product, carefully read and understand all instructions before using this product.● This instruction manual indicates important safety rules and precautions that must be observed.

WARNING

CAUTION

Incorrect operation of machine is dangerous and can cause serious injury or death.

Incorrect operation of machine is dangerous and can cause injury of person or material damages .

Note: Property damage includes damage to homes, households, livestock, pets, and etc.

Unplug

Do Not Disassemble

Electric Shock

Examples of Mark / Pictograph :△ represents "CAUTION" (including danger and warning).The specific contents of caution are shown near the△mark by pictograph or letters.The mark illustrated left represents "ELECTRIC SHOCK ".

● represents "ENFORCEMENT" (Things to do) .The specific contents of "Enforcement" are shown within or near● the mark by pict-ograph or letters.The mark illustrated at left represents "Unplug from outlet".

WARNINGCheck for any damage due to transportation when you receive the product.If any damage is found, inform your local sales shop of the damage status (including the packing box status). If the damaged machine is used, this may cause electric shock, fire, or personal injury.

Damage Check

represents "PROHIBITED OPERATION".The specific contents of "Prohibited" are shown within or near this mark by pictog-raph or letters. The mark illustrated at left represents "DO NOT DISASSEMBLE".

Be sure to ground (earth) the machine.Never connect a ground wire (earthing) to gas pipes, water pipes, lightning rods or telephone cord/grounding wires.An incomplete grounding (earthing) is dangerous and can cause severe electric shock.(Type-D grounding conducted by an electrician is required)

Be sure to ground if the outlet has ground terminal.

Grounding Work

Dedicated (Exclusive-use) outlet.Never use extension cords or connect the unit to other power supply cords. Never connect several or many plugs into the same outlet. It may cause power supply cord to overheat and melt/burn or electric shock or fire.

Plug

Dedicated power supply

Install the product in a dry place. Avoid humidity and water.Humidity and water will deteriorate the insulation and will result in a risk of ground leakage and electric shock. Avoid

Moisture

Do not install near thermal appliance (ex. Stoves, etc).Plastics parts can melt by the heat.

Keep away from heat source

This product is for professional-use. Do not allow children to use the product unattended.Keep out of the reach of children.Will result in a risk of electric shock and injury. Prohibited

WARNINGDo not expose the product to water.Will result in a risk of short circuit, electric shock, rust, and malfunction.

Avoid water

In case of using an earth leakage breaker: If the earth leakage breaker turns OFF, contact your local dealer.

Turning the switch ON will result in a risk of electric shock and fire. Contact

dealer

Do not damage power supply cord.Never work on power cord and never pull, twist or bundle it.Do not place a heavy thing on it.It can damage the power cord and can cause electric shock or fire.

Prohibited

Turn the power OFF in case any abnormality occurs. Unplug the product, cut the power source, and immediately contact your local dealer.Operating a product with abnormality will result in a risk of electric shock and fire. Unplug

Check for dust on prong of power plug and outlet slot at fixed intervals. Ensure that plug is inserted firmly all the way.Dust and improper connections will results in a risk of electric shock and fire.

Maintenance

Before attempting any maintenance or inspection, ensure to turn the power OFF, unplug the product, and wear gloves.

Will result in a risk of injury.

Unplug

Do not touch electric parts such as plugs or operate any electric switches with wet hands.

Will result in a risk of electric shock. Avoid wet

hands

Maintenance

Do not attempt to disassemble or repair the product. All services (excluding replacement of blades and cleaning) shall be conducted by a qualified technician only.Incorrect repair will likely cause irregular operation or electric shock, fire or injury.

Do not disassemble

Never draw the cartridge while operating.Never operate the machine without cartridge.

Will result in a risk of injury.

Prohibited

Do not attempt to alter the machine.

It can cause electric shock and fire.

Do not alter the machine

Do not use outside.Operating the machine outside or in the rain will cause electric bleeding or electric shock.

Avoid Outside

Wash and wipe the cartridge in anticlockwise direction.Clockwise rotation will result in a risk of injury.

Cleaning

Do not touch the blade when install the block ice.

Will result in a risk of injury.

Prohibited

Insert the cartridge firmly all the way.Incorrect insertion may cause tamper (contamination with a foreign substance) or malfunction.

Confirmation

WARNINGInstall the product horizontally on a steady flat surface.Improper installation can cause the unit to fall down and result in risk of injury.

Level

Do not use flammable sprays near the product.Keep vapors and flammable material away from the product.Vapors or flammable material may catch fire by the spark of electric switches and result in a risk of fire.

Prohibited

Install the product on a waterproof surface.Water such as dewfall or melting ice may drop from the product and moisten the surrounding area.

Installation

Hold the plug head when unplugging.Do not grasp any part other than the plug head.Do not pull the electric cord off the outlet by grasping the plug cord.Pulling the electric cord may damage the power cord and result in electric shock or fire. Prohibited

Prohibited

Prohibited

Avoid direct sunlight.Direct sunlight can result in a risk of crack on plastic parts.

At the end of each day, turn OFF the power switch and unplug the product for safety.This is to prevent dust from accumulating on the plug and electric outlet.Dust on plug and outlet can result in a risk of heat and fire.

Unplug

Be sure to switch OFF and unplug when cleaning.Cleaning with the power or switch ON is very dangerous and can cause electric shock or injury. Off

Unplug

Contact local disposal experts or dealer for machine disposal.Abandoned machines are dangerous. Treat blade on machine as a dangerous item when disposing machine.

Experts / Dealer

Be sure to clean the cartridge and rotor before operating.Poor cleaning may cause in a risk of bacteria breeding and will result in health problems.

Cleaning

When selling or transferring this product to a third person, tape this instruction manual on the noticeable area of the product.

Tape manual

Tape

Manual

Never touch the running parts like roter and handle while operationWill result in a risk of injury.

Prohibited

Do not touch the spikes on the rotor.It can cause injury.

Main Body

PART NAMES AND FUNCTIONSPART NAMES AND FUNCTIONS● The purpose of this machine is to make shaved ice from pure water ice or flavored ice. Do not use this machine for any purpose other than making shaved ice.

Power Switch

Main ShaftIt rotates during operation. It transfers power to press ice downward.Ice holder (Rotor) is fixed on the bottom.

Power Plug

Power Cord

HandleThis moves the main shaft upward and downward.

Rotor (Ice Holder)It grips ice and rotates with ice.

Drip Tray

User's Manual

Accessory

Position of Caution Label

(Caution Label is on the back of the main body.)

● Do not peel off the Caution Label.

NOTE

Cartridge (with blade and blade adjuster)Put ice in it.

● If the label unsticks or the word on the label fade, please purchase a new label from your vendor.

● Please connect the machine plug to AC 220V / 240V, and do not use a generator. Troubles caused by using a generator cannot be guaranteed.

IMPORTANT

① Nutritious ice : Nutritious ice must be kept frozen at an appropriate temperature. Unless the temperature is controlled, it cannot be shaved properly.

② Water ice : Ice that is too cold or cloudy in color is not suitable for shaving because it is too hard. Use transparent ice stored for a while at room temperature. Ice that is cloudy in color will not produce soft and fluffy shaved ice. It could damage the blade tip and the blade will not shave ice. Use transparent ice for soft and fluffy shaved ice.

③ Do not put things on the unit.

CHECK BEFORE OPERATIONCHECK BEFORE OPERATION

OPERATION INSTRUCTIONS

Plug the machine into outlet.● Make sure that the main switch is turned OFF before plugging the machine into outlet.

Place the Rotor (Ice Holder).● ① Lower the handle. ② Place the Rotor on the tip of the main shaft. * The Rotor stays on the main shaft firmly due to magnetic energy.

● Pull the handle upward to raise the rotor.

Place ice in the cartridge.● Beware of injury. A blade is mounted on the cartridge.

Insert the cartridge into the main body.● Make sure that the cartridge is inserted all the way.IMPORTANT

If the cartridge is not inserted all the way, the machine may cause malfunction, or foreign objects may contaminate the cartridge.

Lower the handle and hold ice.● Fix the rotor firmly to the ice. * If this is not observed, the ice may not rotate with the rotor.

Rotor Handle

Cartridge

Block Ice

Start of Operation● Place the receptacle for shaved ice under the cartridge and switch on the machine. Turn the blade adjustment knob for the desired ice texture. Turn clockwise for coaser and counter-clockwise for finer.

Turn off the main switch after shaving ice.

● Then, the rotor stops rotating.

Take out the cartridge.● Pull the handle upward. 　① Lift the cartridge.　② Slide it out from the main body.

Take out the rotor.● Lower the handle and take out the rotor.

Clean the cartridge and rotor.

Turn the blade adjustment knob counter-clockwise to lower the blade before cleaning.The blade is sharp and it can cause injury.

NOTE

If you do not lift the cartridge, it will not come out.

CAUTION

Fine

CoarseBlade Adjustment knob

OVERLOAD PROTECTOR/RESET

This machine is equipped with an overload protector, which will automatically protect the motor by stopping operation in the event of overload.When protector engages, machine will stop.Should this occur, please take the following measures:

Switch the machine OFF and unplug machine.

Check the machine and rectify the problem; eg. Take out the ice from the cartridge in case the blade is stuck in the ice. Then, place the ice back into the cartridge.

Leave the machine switched off and unpluggedfor 20 minutes. .● The machine will recover automatically after a 20 minute rest. * If the protector engages often, contact your supplier.

Cartridge Blade

Block Ice

Unplug the machine.● Be sure to unplug machine after use.

Because the plastic parts may be damaged, do not use the following substances.Thinner, benzene, alcohol, petroleum, powder soap, polishing powder, alkaline detergent, acid, soda hyposulfite, scrub brush etc.In case of using chemical cloth, follow the instructions provided with it.

DAILY MAINTENANCE● CLEANING (Cartridge, Rotor, and Drip Tray)

Pull the handle upward and take out the cartridge.

Lower the handle and take out the rotor.

Clean The Cartridge, Rotor, and Drip Tray with a sponge using a soft neutral detergent.Then, wipe them with a clean dry cloth and do not leave any detergent residue.Caution: Beware of the spikesand blade while cleaning.They may cause injury as they are very sharp.

When wiping the cartridge with a sponge or dry cloth, please do not wipe it in clockwise direction. Doing so may cause injury inflicted by the blade on the cartridge.

CLEANING THE OUTSIDE BODY

Wipe the covers using a soft dry cloth and with warm water containing a soft neutral detergent.Be sure to completely remove any trace of detergent with a damp cloth.

Turn the blade adjustment knob counter-clockwise tolower the blade below the bottom surface of the cartridge.If the blade is not low enough, it could cause injury.

Fine

Blade Adjustment knob

Blade

Cartridge Bottom Surface

CLEANING & MAINTENANCECLEANING & MAINTENANCECAUTION

Cartridge

RotorHandle

YEARLY MAINTENANCE (1 OR 2 TIMES PER YEAR)

Checking the earth (ground) cord.Check the earth (ground) cord and its joint to confirm they are not cut damaged or loose. If you find any problems, please contact an electrical expert or engineer.

Checking power supply plug.

HOW TO KEEP THE MACHINE (STORAGE)To warehouse on store the machine for more than one week, dry it completely and keep the machine in a place free from moisture.

● Dedicated (exclusive use) outlets. Always use a dedicated outlet for each machine. Never use extension cords or connect to other power supply cords. Never connect multiple plugs into the same outlet. Failure to comply may cause the power supply cord to melt/burn, resulting in electric shock or fire.

● Do not damage power supply cord. Never tamper with the power cord and never pull, twist, or bundle it. Never place heavy objects on top of it. This may damage the power cord resulting in electric shock or fire.

● Keep the plug clean and plug it into outlet correctly. Always keep the plug clean and plug it into an outlet correctly. Dirty plugs or imperfectly connected plugs can cause electric shock or fire.

MAINTENANCEMAINTENANCE

● Ice cannot be shaved well.

● Ice cannot be shaved well. ● The blade is dull. Replace the cartridge to a new one.

● Before you call repair services, refer to the following instructions. If the problem is not solved after trying the following suggestions, contact your local dealer.

● Plug in the unit.

The unit dosen’t start.

● Set the rotor properly in place.

● The ice is sticking to the rotor.

● Keep the ice at the correct temperature.The unit works, but does not shave ice well.

● Place the ice in the cartridge.

● The ice is not held properly by the rotor.

● Set the rotor in place and lower the handle to hold the ice down.

● Turn the blade adjustment knob clockwise to raise the blade for shaving.

● Switch OFF, and remove the cause according to instructions on Page 8.

Model

230V50/60 Hz.1 PH.

8 minutes

267W×354D×479H

10kgs.

HD12X

SPECIFICATIONSSPECIFICATIONS

12

140/150W

Unit Net Weight

Unit Dimensions(mm)

Rated Time

Electric Consumption

Electrical

Manufacturer :

1533-1 Dogamine, Hagasaki, Kuwana, Mie, 511-0944, Japan.