USG TRANSLUCENTS™ LUMINOUS INFILL PANELS

FEATURES AND BENEFITS

• Fully accessible translucent (luminous) infi ll panels.• Panels can be used with standard USG Donn® Brand DX®/DXL™,

Centricitee™ DXT™, Curvatura™ 3-Dimensional and GridWare™ Open Cell Decorative suspension systems.

• Available in a variety of decors that feature embedded fabrics and other materials as well as solid colors.

• 2'x2' panels (23-3/4"x23-3/4") in all fi nishes.• 2'x6' panels (23-3/4"x71-3/4") in all fi nishes.• USG Translucents™ panels contain a minimum of 40% recycled content.

APPLICATIONS

• Lobbies• Contemporary o� ce environments• Entertainment

• Gaming• High-bay areas• Retail stores

USG Translucents™ Luminous Infi ll Panels/USG Donn® Brand Centricitee™ DXT™ Acoustical

Suspension System

TO ORDER SAMPLES, GO TO USG.COM OR CGCINC.COMCheck usg.com or cgcinc.com for current color and decor availability.

DÉCORS

NaturalLeaves

Coastal Pearl Milan

Ivory Taipei

Lipstick Meander

Mystery Meander

White Meander

Luna Ice

Oyster Linen

BeigeInterlock

Matrix Clear Matte WhiteMesh

WhiteFiberoptic

Tape White Haven

Kauri Silver Spun

Rain

COLOR GALLERY

Agave Blush Calypso Cornfl ower Glacier Graphite Gunmetal Honeydew

Lago Lemon Mimosa Mulberry Nutmeg Olive Olivewood Orchid

Pacifi c Periwinkle Pomegranate Sahara Santorini Seaglass Spice Sunfl ower

Sunset

USG Ceiling Solutions

IC406/rev. 11-17© 2017 USG Corporation and/or its affiliates. All rights reserved.Printed in U.S.A.

Manufactured byUSG Interiors, LLC550 West Adams StreetChicago, IL 60661

NoticeThe information in this document is subject to change without notice. CGC Inc. or USG Corp. assumes no responsibility for any errors that may inadvertently appear in this document.

ORDER SAMPLES/LITERATUREUSG: samplit@usg.com

fax: 888 874-2348 | usg.com CGC: contact Sales Representative

TECHNICAL SERVICES800 USG.4YOU (874-4968)

FOR MOST UP-TO-DATE TECHNICAL INFORMATION

AND LEED REPORT TOOLusgdesignstudio.com cgcdesignstudio.com

PRODUCT INFORMATION Product Typical Sizes System Weight

Nominal Actual

Clear Mat Polycarbonate

2'x2' 23-3/4"x23-3/4" Approximately 0.9 lb./sq. ft.

Standard Décors – 0.118" PETG 2'x2' 2'x6'

23-3/4"x23-3/4" 23-3/4"x71-3/4"

Approximately 0.9 lb./sq. ft.

Rain Acrylic 2'x2' 2'x6'

23-3/4"x23-3/4" 23-3/4"x71-3/4"

Approximately 0.9 lb./sq. ft.

Color Gallery – 0.118" PETG 2'x2' 2'x6'

23-3/4"x23-3/4" 23-3/4"x71-3/4"

Approximately 0.9 lb./sq. ft.

Acoustics This product does not offer any acoustical properties.

Lighting For USG Translucents™ panels, fluorescent strip fixtures should be placed a minimum of 18" above the ceiling and 18" o.c. for best results.

Suspension Systems Lays into standard USG Donn® Brand DX®/DXL™, Centricitee™ DXT™, Curvatura™ 3-Dimensional and GridWare™ suspension systems.

FOR MORE INFORMATION

Product literatureData sheet: IC406

Online toolsusgdesignstudio.com or cgcdesignstudio.com

LimitationsThis product is produced to order and will vary from batch-to-batch – panels ordered at the same time will be produced together and will be identical. USG cannot guarantee batch-to-batch consistency.

Code approvalUSG Translucents™ panels meet Class B requirements for flame spread and smoke developed as defined by ASTM 1264 and as tested in accordance with ASTM E84 and CAN/ULC S102 surface-burning characteristics. USG Translucents™ panels also meet Class A requirements of NFPA and IBC (UBC) as interior finishes, not to be part of an air supply/return system. Designers and installers are advised to consult a fire protection engineer, NFPA 13 and their local codes for guidance where automatic fire detection and suppression systems are present.

Weight0.374 lb./sq. ft. (Clear Matte) 0.90 lb./sq. ft. (All other decors)

Recycled contentDecors: min. 40% recycled content. 100% recyclable. Rain: 50% recycled content. 100% recyclable. Color Gallery: Up to 40% recycled content.

USG TRANSLUCENTS™ LUMINOUS INFILL PANELS

The trademarks USG, CGC, CENTRICITEE, CURVATURA, DONN, DX, DXL, DXT, GRIDWARE, TRANSLUCENTS, IT’S YOUR WORLD. BUILD IT., the USG/CGC logo, the design elements and colors, and related marks are trademarks of USG Corporation or its affiliates.

Saftey First! Follow good safety/industrial hygiene practices during installation. Wear appropriate personal protective equipment. Read SDS and literature before specification and installation.