usg compässo™ trim and c2 paired channels catalog (english) … · 2020-01-10 · compässo™...
TRANSCRIPT
Compässo™
Trim Systems Design Guide
The Finishing Touch
Compässo™ Trim Systems and C2 Paired Compässo Channels provide an elegant finishing touch that dresses up acoustical ceiling assemblies integrating lighting with eye-catching design elements. These unique ceiling accents combine dramatic styling and practicality to make a striking statement in retail spaces, contemporary offices, entertainment and gaming establishments, and education environments.
Offices
Schools
Retail
Entertainment
Design Takes Shape
Page Page
Choose Your System 4 Compässo Standard
This steel suspension trim with a durable baked-on polyester finish can accommodate all USG ceiling systems and has been the industry choice since its inception and introduction to the market more than a decade ago. In addition to its economy, COMPÄSSO Standard is a great value to accent any ceiling. It is a particularly good choice for open-cell grid ceilings because of its un-obtrusive splices and grid clips. COMPÄSSO Standard is available in both engineered curved shapes as well as quick ship bulk cartons.
8 Compässo EliteManufactured from up to 50% recycled aluminum, COMPÄSSO Elite provides cleaner, sharper lines that only an extrusion can provide. With its durable powder-coated finish, it presents elegance with its subtle reveal that will accent the look of any USG ceiling system to present a more refined aesthetic. COMPÄSSO Elite is available in both engineered curved shapes as well as quick ship bulk cartons.
12 Compässo SlimExtruded from highly recycled aluminum, COMPÄSSO Slim transforms any USG Ceiling system into a sleek, plane terminated at the perimeter with a broad horizontal picture frame with mitered corners.
22 Compässo C2
C2 Paired COMPÄSSO Channels are multi-functional design elements that easily integrate lighting and signage, and can be used as a way-finding device throughout a space. These unique ceiling accents combine practicality with dynamic styling for retail spaces, contemporary offices, entertainment
How Design It
Pre-engineered, any color, any shape, designed and packaged, ready to assemble
Quick Ship, two colors
Specify Your System
18 36
Design Your System
Specify Your System
For More Information
Technical Service800 USG.4YOUWebsiteusg.com
Compässo family of suspension trims creates a clean streamlined edge for floating acoustical ceiling assemblies and allows a smooth visual transition among multiple ceiling islands within a space.
User’s Guide
1 Compässo Trim Systems Design Guide
Compässo Suspension Trim Systems
Compässo Trim Systems complement standard grid and tile by providing a finished edge whether it’s curved or straight. The trimming concept allows for the creation of ceiling islands or fascias. It also lends visual excitement to any space, especially retail spaces, contemporary office environments, entertainment and gaming establishments, and education environments. Read on for details on how to design and specify Compässo Trim Systems in your next project.
2 Compässo Trim Systems Design Guide
Design Flexibility CompässoTrimSystemsareavailableindifferenttrimheightsandprofilescustommanufacturedtoyourdesign
specifications.FromtheutilityofCompässoStandardtotheeleganceofCompässo Elite,thereisatrimsystem
tomeetyourneeds.Forevengreaterdesignflair,considereitherCompässoSlimhorizontaltrimorC2paired
Compässochannels.
Functional Style CompässoTrimSystemsfinishstandardceilinggrid,panels,lighting,andairdiffuserstocreatecrispedge
conditionsanduniquefloatingislands.Youcanalsocreategraceful,flowingarcs,curves,andcircles.Useany
USGsuspensionsystemandpanel.Combinestraightandcurvedpiecestoformaceilingperimeter
ofalmostanysizeorshapeyoucanimagine.Squares,triangles,rectangles,circles,ellipses.Noproblem.
Available Colors CompässoTrimSystemsareavailableinstandardandcustomcolorsandcanbepainted360˚whenused
withtheGridWareSuspensionSystemtocreateopen-cellceilings.Forhelpchoosingacustomcolor,the
Sherwin-WilliamsColorAnswersSelectorisagoodreference.
System Options Overview
3 Compässo Trim Systems Design Guide
System Options Heights
2" 4" 6" 8" 10" 12" Quic
k Sh
ip
Engi
neer
ed
Adva
ntag
e Co
lors
*
Woo
d To
nes*
COMPÄSSO Standard
• (2 1/4")
• • • • • • • • •COMPÄSSO Elite • • • • • • • •COMPÄSSO Slim • • •C2 Paired COMPÄSSO Channels
• • • • •
Grid Profile Options DX®/DXL™ DXW™ CentriCitee™ DXT
DX®/DXL™ CentriCitee™ DXLT
Fineline® DX®/DXL™ Concealed
COMPÄSSO
Standard • • • • • • •COMPÄSSO Elite • • • • • •COMPÄSSO Slim • • • • • •
Recommended Applications
Celebr
ation®
True
™ W
ood
Line
ar
True
Woo
d AR
Para
line
®
Dryw
all
Open
Cel
l GridW
are™
COMPÄSSO Standard
•** • • •
COMPÄSSO Elite •**
COMPÄSSO Slim •**
True Wood Trim* • •
*RefertoSC2000forchoices.
**Celebrationpanelscannotbeusedwith21/4"CompässoStandardor2"CompässoElite.
System Overview
4 Compässo Trim Systems Design Guide
View from below
View from above
COMPÄSSO trim
COMPÄSSO splice plate
COMPÄSSO attachment clip
main tee
cross tee
field-cut panel
Compässo StandardSuspension Trim
5 Compässo Trim Systems Design Guide
Layout Example Custom-shaped Ceiling Island
Detail #3inside corner
Detail #1splice
Detail #4grid-to-trim attachment
24” minimum radius
Detail #2outside corner
Details Detail No. 1—Curved Splice Detail No. 2—Corner to Straight/Curved Splice
COMPÄSSO trim
COMPÄSSO splice plate
curve or straight piece
COMPÄSSO splice plate
pre-manufacturedoutside corner
4" 4"
4"
Detail No. 3—Inside Corner Detail No. 4—Grid to Trim Attachment
1. snip top and bottom flange at center
2. fold to desired angle along crease
inside corner trim pieces
COMPÄSSO trim
COMPÄSSO attachment clip
11/2" (height) tee
curveorstraightpiece
Compässospliceplate
pre-manufacturedoutsidecorner
Compässospliceplate
Compässotrim
Compässotrim
Compässoattachmentclip
1½"(height)tee
insidecornertrimpieces
➁ foldtodesiredanglealongcrease
➀ sniptopandbottomflangeatcenter
Applications
6 Compässo Trim Systems Design Guide
Layout Example On-Module Ceiling Island
Detail #1ADetail #1
Details Detail No. 1—Edge Detail Capping Suspension Tee Detail No. 1—Section
COMPÄSSO clip
lay-in panel
COMPÄSSO
edge trim
Detail No. 1A—Edge Detail Parallel to Suspension Tee Detail No. 1A—Section
lay-in panel
COMPÄSSO
edge trim COMPÄSSO clip
Compässo StandardSuspension Trim
Components
7 Compässo Trim Systems Design Guide
Trim Construction Straight Curved
Trim Sizes Section Views
2-1/4" 4" 6" 8" 10" 12"
21/4"
9/16"
4"
9/16"
6"
9/16"
8"
9/16"
10"
9/16"
12"
9/16"
Accessories Attachment Clip Splice
Inside Corner Outside Corner
Compässo StandardSuspension Trim
System Overview
8 Compässo Trim Systems Design Guide
View from Below
View from Above
COMPÄSSO Elite trim
COMPÄSSO Elite splice plate
COMPÄSSO Elite attachment clip
main tee
cross tee
field-cut panel
Compässo EliteSuspension Trim
Components
9 Compässo Trim Systems Design Guide
Trim Construction Straight Curved
Trim Sizes Section Views
2" 4" 6" 8" 10"
2"
3/4"
4"
3/4"
6"
3/4"
8"
3/4"
10"
3/4"
Accessories Attachment Clip Splice Plate
Inside Corner Outside Corner
Compässo EliteSuspension Trim
Applications
10 Compässo Trim Systems Design Guide
Layout Example Custom-shaped Ceiling Island
Detail #1splice
Detail #3a, 3bsplice
24” minimum radius
Detail #2outside corner
Details Detail No. 1—Curved Splice Detail No. 2—Corner to Straight/Curved Splice
COMPÄSSO Elite trim
COMPÄSSO Elite splice plate
4"
12" 12"
pre-manufacturedoutside corner
curve or straight piece
COMPÄSSO Elite splice plate
Detail No. 3A— Grid to Trim Attachment Detail No. 3B— Grid to Trim Attachment w/ Splice Condition
13/4" (height) tee
COMPÄSSO Elite attachment clip
COMPÄSSO Elite trim
Compässo EliteSuspension Trim
CompässoElitetrim
1¾"(height)tee(Fineline)
CompässoEliteattachmentclip
CompässoElitetrim
CompässoElitespliceplate
CompässoElitespliceplate
curveorstraightpiece
pre-manufacturedoutsidecorner
COMPÄSSO ELITE trim
COMPÄSSO ELITE splice plate
COMPÄSSO ELITE attachment clipwith with screw reinserted through “P” hole and threaded into splice plate
COMPÄSSO ELITE attachment clip back plate removed(not needed for this application)
Installation Details
11 Compässo Trim Systems Design Guide
Cut Metal Panels Cantelevered Trim Support
COMPÄSSO attachment clip
11/2" (height) tee
COMPÄSSO Elite trim
COMPÄSSO standard splice(used as metal panel hold-down clip)
COMPÄSSO Elite trim
COMPÄSSO Eliteattachment clip
hanger wire
Compässo EliteSuspension Trim
System Overview
12 Compässo Trim Systems Design Guide
View from Below
View from Above
COMPÄSSO Slim trim
COMPÄSSO Elite splice plate
COMPÄSSO Elite attachment clip
main tee
cross tee
field-cut panel
Compässo SlimSuspension Trim
Components
13 Compässo Trim Systems Design Guide
Trim Construction Perspective Section
13/16"
6 3/16"
2 11/16"
4 7/16"
Accessories Splice Alignment Plate
Inside Corner Outside Corner
Applications
14 Compässo Trim Systems Design Guide
Layout Example Custom-shaped Ceiling Island
BB
Details Detail B-B— Full Module at Perimeter Detail B-B— Fineline Grid
6" perimeter trim
cross tee
COMPÄSSO ELITE
attachment clip
COMPÄSSO SLIM
alignment plate
on-module condition
main tee orcross tee
6" perimeter trim off-module condition
COMPÄSSO ELITE
attachment clip
COMPÄSSO SLIM
alignment plate
Detail B-B— Cut Module at Perimeter
main tee orcross tee
6" perimeter trim
COMPÄSSO ELITE
attachment clip
COMPÄSSO SLIM
alignment plate
Compässo SlimSuspension Trim
Additional Application Details
15 Compässo Trim Systems Design Guide
Elevation Transition
8"
8"grid member
grid attachment clip
special panel seam
special panel
53/4"21/4" COMPÄSSO trim
21/4" COMPÄSSO trim
8" COMPÄSSO trimConcealed grid
Light Cove with Reflector
hanger wire
hanger wire
51/2"
USG grid load transfer bracket
DWSS X grid
USG drywall suspension system
light fixture (by others)
grid attachment clip
5/8" gypsum board
4"
4" COMPÄSSO trim
8" COMPÄSSO trim
Note:DrywallsolutiononlyavailablewithCompässoStandard.
Additional Application Details
16 Compässo Trim Systems Design Guide
Light Cove
varies
#12 gauge hanger wire 40" o.c.
USG grid load transfer bracketUSG drywall suspension system
USG drywall suspension system
#12 hanger wire 4' o.c. or as required by code - cross brace with hanger wire to stabilize cloud
if hanger wire does not fall within 6" of light fixture addan additional wire to within 6"
light fixture (by others)
grid attachment clip
5/8" gypsum board
4", 6" or 8"
COMPÄSSO trim
Light Cove with Closure
12" max.
hanger wire
USG grid load transfer bracket
hanger wire
drywall grid
light fixture(by others)
grid attachment clip
5/8" gypsum boardvaries
1'-0"
6"
8"
6" COMPÄSSO trim, maybe 4"
Compässo Suspension Trim
Note:DrywallsolutiononlyavailablewithCompässoStandard.
Typical Installation Shop Drawing
17 Compässo Trim Systems Design Guide
Typical Shop Drawing — Engineered COMPÄSSO
65.80
65.80
79.97
43.24
77.72
72.43
69.50corner splice plate (bend 90)
R81R54
R63 R135
R47
R42
R49
field cut
field cutfield cut field cut
field cut
finish face
finish face
finish face
37.15
37.15
142
scale 1/4" = 1'-0"
Berry College Krannert SE0-0915
sheet 3 of 43-9-01
GWDX grid050 white 360 paint4" COMPÄSSO
Area 1 COMPÄSSO Plan
74.2 lin. ft.
12
34
6 7
8
9
10
11
36.08% straight COMPÄSSO
11
11
5
11
Application Guide Architectural Specifications
Notetospecifier:ThefollowingspecificationfortheCompässoStandardsuspensiontrimsystemisaguideinthepreparationofaprojectspecificationforaninteriornonfire-ratedtrimmedceilingislandorfascia.Deletesuchitemsthatarenotrelatedtotheparticularproject.Whereblankspacesoccur,provideinformationincidentaltotheparticularprojectforwhichthespecificationisprepared. TheInternationalSystemofUnits(MetricUnits)isavailableonrequest. Section13________________.
Part 1: 1.01 A. Relatedworkspecifiedelsewhere:General Description of Work 1. Insulation:Section________________. 2. Mechanicalequipment:Section________________. 3. Electrical:Section________________. 4. Gypsumboardsystems:Section________________. 5. Acousticalceilings:Section________________. B. Workinstalledbutfurnishedunderothersections:________________. C. Workfurnishedbutinstalledunderothersections:________________.
1.02 A. Edgetrimsystemforsuspendedceilingsystem,consistingof(2-1/4"x9/16")(4"x9/16")(6"x9/16")System Description (8"x9/16")(10"x9/16")(12"x9/16")metalpanscurvedtoinsideandoutsideradiiperdrawingsupplied
byarchitect.AttachmenttogridsystemisprovidedbyaspeciallydesignedCompässoStandardattachmentclip,whichsnapsintoandlocksagainsthemsofCompässotrimandisscrew-attachedtothebulboftheintersectingdonnsuspensionsystemmember.IndependentsectionsoftrimarejoinedtogetherusingtheCompässo Standardspliceplate.
1.03 A. Subcontractorqualifications:InstallershallhavenotlessthanthreeyearsofsuccessfulexperienceintheQuality Assurance installationofceilingsystemsonprojectswithrequirementssimilartorequirementsspecified. B. Requirementsofregulatoryagencies:Codesandregulationsofauthoritieshavingjurisdiction. C. Sourcequalitycontrol: 1. Testreports:Manufacturerwillprovidetestcertificationforminimumrequirementsastestedinaccordance
withapplicableindustrystandardsand/ortomeetperformancestandardsspecifiedbyvariousagencies. 2. Changesfromsystem:Systemperformancefollowinganysubstitutionofmaterialsorchangeinassembly
designmustbecertifiedbythemanufacturer.
1.04 A. ASTMC635:Standardspecificationsformetalsuspensionsystemsforacousticaltileandlay-inpanelceilings.References B. ASTMC636:Recommendedpracticeforinstallationofmetalsuspensionsystemsforacousticaltileandlay-in
panelceilings. C. CISCACeilingSystemsInstallationHandbook.
1.05 A. Samples:Submitrepresentativesampleofcolorandfinishofallexposedmaterials.Submittals B. Shopdrawings: 1. Reflectedceilingplans:Indicatelayoutarrangementofceilingdesign,dimensionsandlocationsofrelated
integratedlightingandairdistributioncomponents. 2. Installationdrawings:Detailcompleteinstallationincludingalltrimpieces,attachmentclips,spliceplatesand
cornerpieces,installationofrelatedlightingandairdistributioncomponents,accessrequirements,andsoundabsorptionrequirements.
3. Manufacturer’sdata:Submitmanufacturer’scatalogcutsorstandarddrawingsshowingdetailsofsystemwithprojectconditionsclearlyidentifiedandmanufacturer’srecommendedinstallationinstructions.
4. Maintenancematerials:Submitonepercentofamountofceilingcomponentsinstalled.
18 Compässo Trim Systems Design Guide
Compässo StandardSuspension Trim
1.06 A. Deliveryofmaterials:Delivermaterialsinoriginal,unopenedpackagesclearlylabeledwiththemanufacturer’sDelivery, Storage nameandidentificationnumbers.and Handling
B. Inspection:Promptlyinspectdeliveredmaterials,filefreightclaimsfordamageduringshipment,andorderreplacementmaterial,asrequired.
C. Storage:Storeinmannerthatwillpreventwarpage,scratchesordamageofanykind. D. Handling:Handleinsuchamannerastoensureagainstracking,distortionorphysicaldamageofanykind.
1.07 A. Existingconditions:(Includespecificalterationworkrequirementsforproject.)Project Conditions B. Environmentalrequirements:Buildingshallbeenclosedwithwindowsandexteriordoorsinplaceandglazed,
androofwatertightbeforeinstallationofceilingsystemandrelatedceilingcomponents.Climacticconditionrangeof60°F(15.56°C)to85°F(29.44°C);relativehumiditynotmorethan70%.
C. Coordinationwithotherwork: 1. Mechanicalwork:Ductworkaboveceilingshallbecomplete,andpermanentheatingandcoolingsystemsoper-
atingtoclimateconditionspriortoinstallationofceilingcomponents. 2. Electricalwork:Installationofconduitaboveceilingshallbecompletebeforeinstallationofceilingcomponents. 3. Fireprotectionwork:Fireprotectionlinesand/orequipmentoccurringaboveceilingshallbecompletedand
testedbeforeceilingcomponentsareinstalled. D. Protection:Protectcompletedworkaboveceilingsystemfromdamageduringinstallationofceilingcomponents.
Part 2: 2.01 CompässoStandardsuspensiontrimforusewithanystandarddonn®suspensionsystemasmanufacturedbyProducts Manufacturer USGInteriors,Inc.,Chicago,Illinois,U.S.A.
2.02 A. 2-1/4"CompässoStandardsystemMaterials (Delete 1. 2-1/4"CompässoStandardtrim:2-1/4"wideface,9/16"horizontallegswithhemsformedforattachmenttoitems not applicable)
theCompässoStandardmountingclip;commercialqualitycold-rolled24-gaugesteel,factoryfinishedin(bakedenamelpaintfinish)()color.
2. Spliceplate:steelinfinishtomatchtrimpans;formedforsnap-fitinto2-1/4" panends. 3. Attachmentclips:hot-dippedgalvanizedsteelin(galvanizedfinish)(finishtomatchpans)formedforsnap-fit
into2-1/4"panandattachedtodonn(DX®)(DXW™)(CentriCitee™)(Fineline®)(USGDrywallSuspensionSystem)suspensionsystemmembers.
4. 90°cornertrimpieces:tomatchCompässotrim. B. 4"CompässoStandardsystem 1. 4"CompässoStandardtrim:4"wideface,9/16"horizontallegswithhemsformedforattachmenttothe
CompässoStandradmountingclip;commercialqualitycold-rolled24-gaugesteel,factoryfinishedin(bakedenamelpaintfinish)()color.
2. Spliceplate:steelinfinishtomatchtrimpans;formedforsnap-fitinto4"panends. 3. Attachmentclips:hot-dippedgalvanizedsteelin(galvanizedfinish)(finishtomatchpans)formedforsnap-fit
into4"panandattachedtodonn(DX)(DXW)(CentriCitee)(Fineline)(USGDrywallSuspensionSystem)suspensionsystemmembers.
4. 90°cornertrimpieces:tomatchCompässoStandardtrim.
19 Compässo Trim Systems Design Guide
Compässo StandardSuspension Trim Application Guide
Architectural Specifications
C. 6"CompässoStandardsystem 1. 6"CompässoStandardtrim:6"wideface,9/16"horizontallegswithhemsformedforattachmenttothe
CompässoStandardmountingclip;commercialqualitycold-rolled24-gaugesteel,factoryfinishedin(bakedenamelpaintfinish)()color.
2. Spliceplate:steelinfinishtomatchtrimpans;formedforsnap-fitinto6"panends. 3. Attachmentclips:hot-dippedgalvanizedsteelin(galvanizedfinish)(finishtomatchpans)formedforsnap-fit
into6"panandattachedtodonn(DX)(DXW)(CentriCitee)(Fineline)(USGDrywallSuspensionSystem)suspensionsystemmembers.
4. 90°cornertrimpieces:tomatchCompässoStandardtrim. D. 8"CompässoStandardsystem 1. 8"CompässoStandardtrim:8"wideface,9/16"horizontallegswithhemsformedforattachmenttothe
CompässoStandardmountingclip;commercialqualitycold-rolled24-gaugesteel,factoryfinishedin(bakedenamelpaintfinish)()color.
2. Spliceplate:steelinfinishtomatchtrimpans;formedforsnap-fitinto8"panends. 3. Attachmentclips:hot-dippedgalvanizedsteelin(galvanizedfinish)(finishtomatchpans)formedforsnap-fit
into8"panandattachedtodonn(DX)(DXW)(CentriCitee)(Fineline)(USGDrywallSuspensionSystem)suspensionsystemmembers.
4. 90°cornertrimpieces:tomatchCompässoStandardtrim. E. 10"CompässoStandardsystem 1. 10"CompässoStandardtrim:10"wideface,9/16"horizontallegswithhemsformedforattachmenttothe
Compässomountingclip;commercialqualitycold-rolled24-gaugesteel,factoryfinishedin(bakedenamelpaintfinish)()color.
2. Spliceplate:steelinfinishtomatchtrimpans;formedforsnap-fitinto10"panends. 3. Attachmentclips:hot-dippedgalvanizedsteelin(galvanizedfinish)(finishtomatchpans)formedforsnap-fit
into10"panandattachedtodonn(DX)(DXW)(CentriCitee)(Fineline)(USGDrywallSuspensionSystem)suspensionsystemmembers.
4. 90°cornertrimpieces:tomatchCompässoStandardtrim. F. 12"CompässoStandardsystem 1. 12"CompässoStandardtrim:12"wideface,9/16"horizontallegswithhemsformedforattachmenttothe
CompässoStandardmountingclip;commercialqualitycold-rolled24-gaugesteel,factoryfinishedin(bakedenamelpaintfinish)()color.
2. Spliceplate:steelinfinishtomatchtrimpans;formedforsnap-fitinto12"panends. 3. Attachmentclips:hot-dippedgalvanizedsteelin(galvanizedfinish)(finishtomatchpans)formedforsnap-fit
into12"panandattachedtodonn(DX)(DXW)(CentriCitee)(Fineline)(USGDrywallSuspensionSystem)suspensionsystemmembers.
4. 90°cornertrimpieces:tomatchCompässoStandardtrim. G. ForspecificprojectdetailsandbillofmaterialsseeUSGInteriorsDrawingNo.RTQ-________________
(providedbyUSGInteriorssalesrepresentative).
2.03 A. Trimpans:EdgesformedtosnapontoattachmentclipsandprovidepositivemechanicallockwithnovisibleFabrication fasteners.Factoryfinishedtomatchapprovedsamples. B. Spliceplates:Formedtosnapintoandprovidepositivelockbetweenabuttingpanswithnovisiblefasteners.
Factoryfinishedtomatchtrimpans. C. Mountingclips:Formedtosnapintotrimpansandprovidepositivemechanicallockwithnovisiblefasteners
whileprovidingavariableangle,screw-fastenedconnectiontosuspensionmemberswhichintersectthetrim.
20 Compässo Trim Systems Design Guide
Part 3: 3.01 A. Examineareastoreceivetrimsystemforconditionswhichwilladverselyaffectinstallation.Execution Inspection B. Donotstartworkuntilunsatisfactoryconditionsarecorrected. C. Worktobeconcealed:Verifyworkabovesupportsystemiscomplete,tested,andinstalledinmannerwhichwill
notaffectlayoutandinstallationofceilingsystem. D. Fire-ratedassembly:Constructionaboveceilingsystemshallmeetrequirementsasapplicabletoprovidefire-
resistanceratingspecified.
3.02 A. Fielddimensions:Installermustverifyactualfielddimensionspriortoinstallation.Preparation B. Renovationwork:Installingcontractorshallverifythatexistingceilingstructureisadequatetosupportadditional
CompässoStandardceilingsuspensionrequirement. C. Coordination:Coordinateandscheduleinstallationofceilingsystemwithworkofothertradesaffectedby
thisinstallation,withparticularattentiongiventomechanicalandelectricalworkrequiredtobeinstalledandoperatingbeforeceilingworkcanbegin.
3.03 A. Reference:Installinaccordancewithapprovedshopdrawingsandmanufacturer’sinstructions.FollowInstallation architects’detailsforthermalandbuildingexpansionjointtreatments. B. Hangerwires: 1. Spacing:Spacehangerwiresmaximum48"o.c.alonglengthofcarriersystem,attacheddirectlytostructure
above. 2. Limitation:Donotsupporthangerwiresfrommechanicaland/orelectricalequipment,piping,orotherequipment
occurringaboveceiling. 3. Provideadditionalfixturesupportasrequiredinaccordancewithlocalbuildingcodesorotherregulatoryagencies. C. CompässoStandardsystem:Installaccordingtoprocedureprovidedbymanufacturerandinaccordancewith
approvedshopdrawings. 1. Perimeterconnectiondetail(recommended)(optional). D. Lightingcomponents:RefertoSection16______________. E. Airdistributioncomponents:RefertoSection15______________.
3.04 A. Deflectiononinstalledsystem:Maximumdeflectionshallnotexceed1/360ofthespan.Field Quality Control
21 Compässo Trim Systems Design Guide
Application Guide Architectural Specifications
Notetospecifier:ThefollowingspecificationfortheCompässoElitesuspensiontrimsystemisaguideinthepreparationofaprojectspecificationforaninteriornonfire-ratedtrimmedceilingislandorfascia.Deletesuchitemsthatarenotrelatedtotheparticularproject.Whereblankspacesoccur,provideinformationincidentaltotheparticularprojectforwhichthespecificationisprepared. TheInternationalSystemofUnits(MetricUnits)isavailableonrequest. Section13________________.
Part 1: 1.01 A. Relatedworkspecifiedelsewhere:General Description of Work 1. Insulation:Section________________. 2. Mechanicalequipment:Section________________. 3. Electrical:Section________________. 4. Gypsumboardsystems:Section________________. 5. Acousticalceilings:Section________________. B. Workinstalledbutfurnishedunderothersections:________________. C. Workfurnishedbutinstalledunderothersections:________________.
1.02 A. Edgetrimsystemforsuspendedceilingsystem,consistingof(2"x9/16")(4"x9/16")(6"x9/16")System Description (8"x9/16")(10"x9/16")metalpanscurvedtoinsideandoutsideradiiperdrawingsuppliedbyarchitect.
AttachmenttogridsystemisprovidedbyaspeciallydesignedCompässoEliteattachmentclip,whichscrewattachestoandlocksagainstthebossesofCompässoElitetrimandisscrew-attachedtothebulboftheintersectingdonnsuspensionsystemmember.IndependentsectionsoftrimarejoinedtogetherusingtheCompässoElitespliceplate.
1.03 A. Subcontractorqualifications:InstallershallhavenotlessthanthreeyearsofsuccessfulexperienceintheQuality Assurance installationofceilingsystemsonprojectswithrequirementssimilartorequirementsspecified. B. Requirementsofregulatoryagencies:Codesandregulationsofauthoritieshavingjurisdiction. C. Sourcequalitycontrol: 1. Testreports:Manufacturerwillprovidetestcertificationforminimumrequirementsastestedinaccordance
withapplicableindustrystandardsand/ortomeetperformancestandardsspecifiedbyvariousagencies. 2. Changesfromsystem:Systemperformancefollowinganysubstitutionofmaterialsorchangeinassembly
designmustbecertifiedbythemanufacturer.
1.04 A. ASTMC635:Standardspecificationsformetalsuspensionsystemsforacousticaltileandlay-inpanelceilings.References B. ASTMC636:Recommendedpracticeforinstallationofmetalsuspensionsystemsforacousticaltileandlay-in
panelceilings. C. CISCACeilingSystemsInstallationHandbook.
1.05 A. Samples:Submitrepresentativesampleofcolorandfinishofallexposedmaterials.Submittals B. Shopdrawings: 1. Reflectedceilingplans:Indicatelayoutarrangementofceilingdesign,dimensionsandlocationsofrelated
integratedlightingandairdistributioncomponents. 2. Installationdrawings:Detailcompleteinstallationincludingalltrimpieces,attachmentclips,spliceplatesand
cornerpieces,installationofrelatedlightingandairdistributioncomponents,accessrequirements,andsoundabsorptionrequirements.
3. Manufacturer’sdata:Submitmanufacturer’scatalogcutsorstandarddrawingsshowingdetailsofsystemwithprojectconditionsclearlyidentifiedandmanufacturer’srecommendedinstallationinstructions.
4. Maintenancematerials:Submitonepercentofamountofceilingcomponentsinstalled.
22 Compässo Trim Systems Design Guide
Compässo EliteTrim Systems
1.06 A. Deliveryofmaterials:Delivermaterialsinoriginal,unopenedpackagesclearlylabeledwiththemanufacturer’sDelivery, Storage nameandidentificationnumbers.and Handling
B. Inspection:Promptlyinspectdeliveredmaterials,filefreightclaimsfordamageduringshipment,andorderreplacementmaterial,asrequired.
C. Storage:Storeinmannerthatwillpreventwarpage,scratchesordamageofanykind. D. Handling:Handleinsuchamannerastoensureagainstracking,distortionorphysicaldamageofanykind.
1.07 A. Existingconditions:(Includespecificalterationworkrequirementsforproject.)Project Conditions B. Environmentalrequirements:Buildingshallbeenclosedwithwindowsandexteriordoorsinplaceandglazed,
androofwatertightbeforeinstallationofceilingsystemandrelatedceilingcomponents.Climacticconditionrangeof60°F(15.56°C)to85°F(29.44°C);relativehumiditynotmorethan70%.
C. Coordinationwithotherwork: 1. Mechanicalwork:Ductworkaboveceilingshallbecomplete,andpermanentheatingandcoolingsystemsoper-
atingtoclimateconditionspriortoinstallationofceilingcomponents. 2. Electricalwork:Installationofconduitaboveceilingshallbecompletebeforeinstallationofceilingcomponents. 3. Fireprotectionwork:Fireprotectionlinesand/orequipmentoccurringaboveceilingshallbecompletedand
testedbeforeceilingcomponentsareinstalled. D. Protection:Protectcompletedworkaboveceilingsystemfromdamageduringinstallationofceilingcomponents.
Part 2: 2.01 CompässoElitesuspensiontrimforusewithanystandarddonn®suspensionsystemasmanufacturedbyUSGProducts Manufacturer Interiors,Inc.,Chicago,Illinois,U.S.A.
2.02 A. 2"CompässoElitesystemMaterials (Delete 1. 2"CompässoElitetrim:2"wideface,9/16"horizontallegswithbossesextrudedforattachmenttotheitems not applicable)
Compässo Eliteattachmentclip;extrudedaluminum,factorypowdercoated.()color. 2. Spliceplate:steelinfinishtomatchtrim;formedforsnap-fitinto2" panends. 3. Attachmentclips:hot-dippedgalvanizedsteelin(galvanizedfinish)(finishtomatchtrim)formedforsnap-fit
into2"trimandattachedtodonn(DX®)(DXW™)(CentriCitee™)(Fineline®)(USGDrywallSuspensionSystem)suspensionsystemmembers.
4. 90°cornertrimpieces:tomatchCompässoElitetrim. B. 4"Compässo Elitesystem 1. 4"CompässoElitetrim:4"wideface,9/16"horizontallegswithbossesextrudedforattachmenttothe
CompässoEliteattachmentclip;extrudedaluminum,factorypowdercoated.()color. 2. Spliceplate:steelinfinishtomatchtrim;formedforsnap-fitinto4"panends. 3. Attachmentclips:hot-dippedgalvanizedsteelin(galvanizedfinish)(finishtomatchpans)formedforsnap-fit
into4"trimandattachedtodonn(DX)(DXW)(CentriCitee)(Fineline)(USGDrywallSuspensionSystem)suspensionsystemmembers.
4. 90°cornertrimpieces:tomatchCompässoElitetrim.
23 Compässo Trim Systems Design Guide
Compässo EliteSuspension Trim Application Guide
Architectural Specifications
C. 6"CompässoElitesystem 1. 6"CompässoElitetrim:6"wideface,9/16"horizontallegswithbossesextrudedforattachmenttothe
Compässo Eliteattachmentclip;extrudedaluminum,factorypowdercoated.()color. 2. Spliceplate:steelinfinishtomatchtrimpans;formedforsnap-fitinto6"panends. 3. Attachmentclips:hot-dippedgalvanizedsteelin(galvanizedfinish)(finishtomatchpans)formedforsnap-fit
into6"trimandattachedtodonn(DX)(DXW)(CentriCitee)(Fineline)(USGDrywallSuspensionSystem)suspensionsystemmembers.
4. 90°cornertrimpieces:tomatchCompässoElitetrim. D. 8"CompässoElitesystem 1. 8"CompässoElitetrim:8"wideface,9/16"horizontallegswithbossesextrudedforattachmenttothe
CompässoEliteattachmentclip;extrudedaluminum,factorypowdercoated.()color. 2. Spliceplate:steelinfinishtomatchtrimpans;formedforsnap-fitinto8"panends. 3. Attachmentclips:hot-dippedgalvanizedsteelin(galvanizedfinish)(finishtomatchpans)formedforsnap-fit
into8"trimandattachedtodonn(DX)(DXW)(CentriCitee)(Fineline)(USGDrywallSuspensionSystem)suspensionsystemmembers.
4. 90°cornertrimpieces:tomatchCompässoElitetrim. E. 10"CompässoElitesystem 1. 10"CompässoElitetrim:10"wideface,9/16"horizontallegswithbossesextrudedforattachmenttothe
Compässoattachmentclip;extrudedaluminum,factorypowdercoated()color. 2. Spliceplate:steelinfinishtomatchtrimpans;formedforsnap-fitinto10"panends. 3. Attachmentclips:hot-dippedgalvanizedsteelin(galvanizedfinish)(finishtomatchpans)formedforsnap-fit
into10"trimandattachedtodonn(DX)(DXW)(CentriCitee)(Fineline)(USGDrywallSuspensionSystem)suspensionsystemmembers.
4. 90°cornertrimpieces:tomatchCompässoElitetrim. F. ForspecificprojectdetailsandbillofmaterialsseeUSGInteriorsDrawingNo.RTQ-________________
(providedbyUSGInteriorssalesrepresentative).
2.03 A. Trim:EdgesextrudedtomatewithattachmentclipsandprovidepositivemechanicallockwithnovisibleFabrication fasteners.Factoryfinishedtomatchapprovedsamples. B. Spliceplates:Formedtoscrewintoandprovidepositivelockbetweenabuttingpanswithnovisiblefasteners.
Factoryfinishedtomatchtrim. C. Mountingclips:Formedtoscrew-attachtotrimandprovidepositivemechanicallockwithnovisible
fastenerswhileprovidingavariableangle,screw-fastenedconnectiontosuspensionmemberswhichintersectthetrim.
24 Compässo Trim Systems Design Guide
Part 3: 3.01 A. Examineareastoreceivetrimsystemforconditionswhichwilladverselyaffectinstallation.Execution Inspection B. Donotstartworkuntilunsatisfactoryconditionsarecorrected. C. Worktobeconcealed:Verifyworkabovesupportsystemiscomplete,tested,andinstalledinmannerwhichwill
notaffectlayoutandinstallationofceilingsystem. D. Fire-ratedassembly:Constructionaboveceilingsystemshallmeetrequirementsasapplicabletoprovidefire-
resistanceratingspecified.
3.02 A. Fielddimensions:Installermustverifyactualfielddimensionspriortoinstallation.Preparation B. Renovationwork:Installingcontractorshallverifythatexistingceilingstructureisadequatetosupportadditional
CompässoEliteceilingsuspensionrequirement. C. Coordination:Coordinateandscheduleinstallationofceilingsystemwithworkofothertradesaffectedby
thisinstallation,withparticularattentiongiventomechanicalandelectricalworkrequiredtobeinstalledandoperatingbeforeceilingworkcanbegin.
3.03 A. Reference:Installinaccordancewithapprovedshopdrawingsandmanufacturer’sinstructions.FollowInstallation architects’detailsforthermalandbuildingexpansionjointtreatments. B. Hangerwires: 1. Spacing:Spacehangerwiresmaximum48"o.c.alonglengthofcarriersystem,attacheddirectlytostructure
above. 2. Limitation:Donotsupporthangerwiresfrommechanicaland/orelectricalequipment,piping,orotherequipment
occurringaboveceiling. 3. Provideadditionalfixturesupportasrequiredinaccordancewithlocalbuildingcodesorotherregulatoryagencies. C. CompässoElitesystem:Installaccordingtoprocedureprovidedbymanufacturerandinaccordancewith
approvedshopdrawings. 1. Perimeterconnectiondetail(recommended)(optional). D. Lightingcomponents:RefertoSection16______________. E. Airdistributioncomponents:RefertoSection15______________.
3.04 A. Deflectiononinstalledsystem:Maximumdeflectionshallnotexceed1/360ofthespan.Field Quality Control
25 Compässo Trim Systems Design Guide
COVER SHOT
C2 Paired Compässo Channels*
C2 Paired Compässo Channels are multi-functional design elements that easily integrate lighting and signage, and can be used as way-finding devices throughout a space. These unique ceiling accents combine practicality with dynamic styling for retail spaces, contemporary offices, entertainment and gaming establishments, and education environments.
*Patentpending 26 Compässo Trim Systems Design Guide
Design Flexibility C2PairedCompässoChannelsareavailableinstraightandcurvedpartsinfivedifferentsizes.Createunique
configurationsusingcircles,straightpieces,curves,arcs,andangles.
Functional Style C2PairedCompässoChannelscomplementexistingceilingsoropenplanswithoutceilings.Theyareeasy
toinstallandcanbesuspendedfromtheceilingwithhangerwire,cable,orrodsdependingupondesign
criteria.Lighting,displays,orsignagecanbeeasilyintegratedintoC2PairedCompässoChannels—
seepages8-11.C2PairedCompässoChannelsprovideagreatsurfaceforappliedgraphicsandsignage.
Available Colors C2PairedCompässoChannelsareavailableinstandardandcustomcolors.Thestandardinteriorcolor
isgray.Forhelpchoosingacustomcolor,theSherwin-WilliamsColorAnswersSelectorisagoodreference.
Orsimplysupplyuswithacolorchipandourpaintdepartmentwillmatchthecolorofyourchoice.
Components
27 Compässo Trim Systems Design Guide
Trim Construction Narrow Reveal (5/8"), 1-3/4" Overall Width Wide Reveal (1-3/8"), 2-1/2" Overall Width
4" Trim 6" Trim 8" Trim 6" Trim 8" Trim
13/4"
13/4"13/4"
21/2"21/2"
Trim Size XXXX
Hanger Bracket/Narrow Reveal Hanger Bracket/Wide Reveal Accessible Splice
Accessories Splice Cover End Cap Accessory Angles for Mounting Attachments
15/8"21/2"
large small
Applications
28 Compässo Trim Systems Design Guide
Layout Example On-Module Ceiling Island
A
5
B
5D
5
C
5
E
5
Details Detail No. 1—Edge Detail Capping Suspension Tee Detail No. 3—Outside Corner
hanger wire
C2 channels
hanger bracket
end caps
C2 channel
Detail No. 1A—Edge Detail Parallel to Suspension Tee Detail No. 1A—Section
screws
C2 channel
notched C2 channels
C2 channels
hanger brackets
C2 Paired Compässo Channels
Details A. Hanger Bracket A. Alt-1 (for tilted applications) A. Alt-2
B. End Cap C. Wall Termination D. Splice
E. 4-way Intersection
screws
C2 channel
notched C2 channels
C2 channels
hanger bracketsbottom of C2 channels
29 Compässo Trim Systems Design Guide
cable w/ crimpconnector
C2 channel
C2 channel
hanger bracket
hanger wire
C2 channels
hanger bracket
end caps
C2 channel
appropriate fasteners
wall
C2 channels
hanger bracket
C2 channel
splices
rod
hanger bracket
accessory angle
30 Compässo Trim Systems Design Guide
Corner and Stacked Applications
ThesystemcomponentsofC2PairedCompässoChannelsallowyoutoturncornerspreciselyatspecificanglesorcurvesandtostackthechannelsvertically.
CORNER & STACKED PERSPECTIVE
G
7
30˚ min.
24" min.radius
B
5
F
7
D
5
Corner and Stacked Perspective
C2 Paired Compässo Channels
Details F. Stacked Detail F. Alt-1 F. Alt-2*
G. Corner Detail
*Hangerbrackettohangerbracketattachmentscanonlybeusedwith1-3/8"reveal.
Stackhangerbracketsverticallyusingaccessoryanglestocreatealayeredceilingaccent,andusespliceplatestojoinindependentsectionsofcurvedorstraighttrimtoswitchdirectionandturncorners.
31 Compässo Trim Systems Design Guide
small accessory angle
threaded rod
C2 channels
C2 channels
hanger bracket
hanger bracket
large accessory anglesbolt
C2 channels
C2 channels
hanger bracket
hanger bracket
C2 channels
hanger brackets
pre-mitered C2 channel components
splice
C2 channel
splice
32 Compässo Trim Systems Design Guide
Lighting and Signage Applications
LightfixturesintegrateeasilywithC2PairedCompässoChannelstocreatestunningaccentsthatilluminateanyspace.Lowvoltage,neon,andlinevoltagelightingareidealforusewithC2PairedCompässoChannels.
LIGHTING PERSPECTIVE
A
5
B
5D
5
C
5
E
5
H
9
I
9
J
9
K
9
Lighting and Signage Perspective
C2 Paired Compässo Channels
Details H. Point Lighting H. Alt-1, Exit Sign
I. Flexible Rail Lighting (exposed rail) J. Flexible Rail Lighting (concealed rail) K. Neon Lighting
Note: LargerlightfixturesandheaviersignageshouldnotbesuspendedfromC2PairedCompässoChannels.Theyshouldbehungindependently.
Attachlightinghardwareformosttypesoflightfixturestothehangerbracketsandaccessoryanglesusedtoconnectthechannels.
33 Compässo Trim Systems Design Guide
light fixture by others
standard electrical box and coverby others
hanger bracket
hanger bracket
accessory angle screws
rail lighting(by others)
C2 channels
exit sign(by others)
hanger wire
hanger bracket
accessory angle
screws
rail lighting(by others)
neon lightingby others
hanger bracket
accessory angle screws
34 Compässo Trim Systems Design Guide
Ceiling Interface Applications
Ceiling Interface Perspective
Differentsizeoptionscanbeusedtoaccommodatevaryingceilingheightsorbehungbelowatraditionalceilingtoaddvisualinteresttoanyspace.
N
13
O
13
C2 Paired Compässo Channels
Details N. Offset Ceiling Interface (straight) N. Alt-1
N. Offset Ceiling Interface (curved) N. Alt-1
O. Ceiling Attachment O. Alt-1 O. Alt-2
AttachC2PairedCompässoChannelsdirectlytoanyceilingsystem(flat,drywall,orconcrete).
35 Compässo Trim Systems Design Guide
C2 channel
C2 channel hanger bracket
standard or flexible wall angle
C2 channel
C2 channel
hanger bracket
standard or flexible wall angle
standard or flexible wall angle
C2 channel
C2 channel
hanger bracket
large accessory angle
appropriate fastener
C2 channel
C2 channel
hanger bracket
large accessory angle
appropriate fastener
spacer
C2 channelC2 channel
hanger bracket
ceiling grid
hanger(by others)
C2 channel
C2 channel
hanger bracket
21/4" COMPÄSSO trim
standard or flexible wall angle
C2 channel
C2 channel
hanger bracket
standard or flexible wall angle
21/4" COMPÄSSO trim
Application Guide Architectural Specifications
36 Compässo Trim Systems Design Guide
Notetospecifier:ThefollowingspecificationfortheC2PairedCompässoChannelssystemisaguideinthepreparationofaprojectspecificationforaninteriornonfire-rateddesignelement.Deletesuchitemsthatarenotrelatedtotheparticularproject.Whereblankspacesoccur,provideinformationincidentaltotheparticularprojectforwhichthespecificationisprepared.
TheInternationalSystemofUnits(Metricunits)isavailableuponrequest. Section13________.
Part 1: 1.01 A. Relatedworkspecifiedelsewhere:General Description of Work 1. Insulation:Section________. 2. Mechanicalequipment:Section________. 3. Electrical:Section________. 4. GypsumBoardsystems:Section________. 5. Acousticalceilings:Section________. B. Workinstalledbutfurnishedunderothersections:________. C. Workfurnishedbutinstalledunderothersections:________.
1.02 A. C2PairedCompässoChannelsforsuspendeddesignelements,consistingof(4"x5/8"reveal)(6"x5/8"reveal)System Description (8"x5/8"reveal)(6"x1-3/8"reveal)(8"x1-3/8"reveal)metalsections,straightorcurvedtoradiiranging
fromaminimumof24"andsweepingthroughincludedanglesof30degreesorgreater.AttachmentisprovidedbyspeciallydesignedC2Compässohangerbracket,whichsnapsintoandlocksagainsthemsofCompässotrim.IndependentsectionsoftrimarejoinedtogetherusingtheCompässospliceplate.
1.03 A. Subcontractorqualifications:InstallershallhaveofsuccessfulexperienceintheinstallationofsuspendedQuality Assurance ceilingsystemswithrequirementssimilartorequirementsspecified. B. Requirementsorregulatoryagencies:Codesandregulationsofauthoritieshavingjurisdiction.
1.04 A. ASTMC635:StandardSpecificationfortheManufacture,Performance,andTestingofMetalSuspensionReferences SystemsforAcousticalTileandLay-inPanelCeilings. B. ASTMC636:StandardPracticeforInstallationofMetalSuspensionSystemsforAcousticalTileandLay-inPanels. C. CISCACeilingSystemsInstallationHandbook.
1.05 A. Samples:Submitrepresentativesampleofcolorandfinishofallexposedmaterials.Submittals B. ShopDrawings: 1. Reflectedceilingplans:Indicatelayoutarrangementofceilingdesign,dimensionsandlocationsofrelated
integratedlightingandsignagecomponents.Includeelevationheightsandrelationtootherceilingplanes. 2. Installationdrawings:Detailcompleteinstallationincludingalltrimpieces,attachmentclips,spliceplates,
cornerpieces,intersections,endcaps,andinstallationofrelatedlightingandsignagecomponents. 3. Manufacturer’sdata:Submitmanufacturer’scataloguecutsorstandarddrawingsshowingdetailsofsystem
withprojectconditionsclearlyidentifiedandmanufacturer’srecommendedinstallationinstructions.
1.06 A. Deliveryofmaterials:Delivermaterialsinoriginal,unopenedpackagesclearlylabeledwiththemanufacturer’sDelivery, Storage nameandidentificationnumbers.
and Handling
B. Inspection:Promptlyinspectdeliveredmaterials,filefreightclaimsfordamageduringshipment,andorderreplacementmaterial,asrequired.
C. Storage:Storeinamannerthatwillpreventscratchesordamageofanykind. D. Handling:Handleinsuchamannerastoensureagainstracking,distortionorphysicaldamageofanykind.
C2 PairedCompässo Channels
1.07 A. Existingconditions:(Includespecificalterationworkrequirementsforproject.)Project Conditions B. Environmentalrequirements:Buildingshallbeenclosedwithwindowsandexteriordoorsinplaceandglazed,
androofwatertightbeforeinstallationofceilingsystemandrelatedceilingcomponents.Climaticconditionsrangeof60°F(15.56°C)to85°F(29.44°C);relativehumiditynotmorethan70%.
C. Coordinationwithotherwork: 1. Mechanicalwork:Ductworkaboveceilingshallbecomplete,andpermanentheatingandcoolingsystemsoper-
atingtoclimateconditionspriortoinstallationofC2PairedCompässoChannels. 2. Electricalwork:Installationofconduitaboveceilingshallbecompletebeforeinstallationofceilingcomponents.
CoordinateelectricalworkwithinstallationofC2PairedCompässoChannels. 3. Fireprotectionwork:Fireprotectionlinesand/orequipmentoccurringaboveCeilingshallbecompletedand
testedbeforeceilingcomponentsareinstalled. D Protection:Protectcompletedworkaboveceilingsystemfromdamageduringinstallationofceilingcomponents.
Part 2: 2.01 C2PairedCompässoChannelsasmanufacturedbyUSGInteriors,Inc.,Chicago,Illinois,U.S.A.Products Manufacturer
2.02 A. 4”C2PairedCompässosystemMaterials (Delete 1. C2PairedCompässoChannels:4"wideface,9/16"horizontallegswithhemsformedforattachmenttotheitems not applicable)
mountingbracketcreatinga5/8"reveal;commercialqualitycold-rolled24-gaugesteel,factoryfinishedin(bakedenamelpaintfinish)()colorwithgrayinterior.
2. SplicePlate:steelinfinishtomatchtrimchannels;formedforsnap-fitinto4"channelends. 3. MountingBrackets:steelbracketsinmanufacturer’sstandardpaintedfinish,colorgray,formedforsnap-fitinto
4"channelsandattachedtohangerdevices. 4. 90°cornertrimpieces:tomatchC2PairedCompässoChannels 5. Endcaps:tomatchC2PairedCompässoChannels 6. AccessoryDeviceBracket:steelaccessoryanglein(large2-1/2")(small1-5/8"),tocoordinatewithelectrical. 7. HangerDevices:Turnbuckledevicesandaccessoriesfor(1/4"threadedrod)(1/32"diameteraircraftcable) B. 6"C2PairedCompässosystem 1. C2PairedCompässoChannels:6"wideface,9/16"horizontallegswithhemsformedforattachmenttothe
mountingbracketcreatinga5/8"reveal;commercialqualitycold-rolled24-gaugesteel,factoryfinishedin(bakedenamelpaintfinish)()colorwithgrayinterior.
2. SplicePlate:steelinfinishtomatchtrimchannels;formedforsnap-fitinto6"channelends. 3. MountingBrackets:steelbracketsinmanufacturer’sstandardpaintedfinish,colorgray,formedforsnap-fitinto
6"channelsandattachedtohangerdevices. 4. 90°cornertrimpieces:tomatchC2PairedCompässoChannels. 5. Endcaps:tomatchC2PairedCompässoChannels. 6. AccessoryDeviceBracket:steelaccessoryanglein(large2-1/2")(small1-5/8"),tocoordinatewithelectrical. 7. HangerDevices:Turnbuckledevicesandaccessoriesfor(1/4"threadedrod)(1/32"diameteraircraftcable). C. 8"C2PairedCompässosystem 1. C2PairedCompässoChannels:8"wideface,9/16"horizontallegswithhemsformedforattachmenttothe
mountingbracketcreatinga5/8"reveal;commercialqualitycold-rolled24-gaugesteel,factoryfinishedin(bakedenamelpaintfinish)()colorwithgrayinterior.
2. SplicePlate:steelinfinishtomatchtrimchannels;formedforsnap-fitinto8"channelends. 3. MountingBrackets:steelbracketsinmanufacturer’sstandardpaintedfinish,colorgray,formedforsnap-fitinto
8"channelsandattachedtohangerdevices. 4. 90°cornertrimpieces:tomatchC2PairedCompässoChannels. 5. Endcaps:tomatchC2PairedCompässoChannels. 6. AccessoryDeviceBracket:steelaccessoryanglein(large2-1/2")(small1-5/8"),tocoordinatewithelectrical. 7. HangerDevices:Turnbuckledevicesandaccessoriesfor(1/4"threadedrod)(1/32"diameteraircraftcable).
37 Compässo Trim Systems Design Guide
Application Guide Architectural Specifications
D. 6"C2PairedCompässosystem 1.C2PairedCompässoChannels:6"wideface,9/16"horizontallegswithhemsformedforattachmenttothe
mountingbracketcreatinga1-3/8"reveal;commercialqualitycold-rolled24-gaugesteel,factoryfinishedin(bakedenamelpaintfinish)()colorwithgrayinterior.
2. SplicePlate:steelinfinishtomatchtrimchannels;formedforsnap-fitinto6"channelends. 3. MountingBrackets:steelbracketsinmanufacturer’sstandardpaintedfinish,colorgray,formedforsnap-fitinto
6"channelsandattachedtohangerdevices. 4. 90°cornertrimpieces:tomatchC2PairedCompässoChannels. 5. Endcaps:tomatchC2PairedCompässoChannels. 6. AccessoryDeviceBracket:steelaccessoryanglein(large2-1/2")(small1-5/8"),tocoordinatewithelectrical. 7. HangerDevices:Turnbuckledevicesandaccessoriesfor(1/4"threadedrod)(1/32"diameteraircraftcable). E. 8"C2PairedCompässosystem 1.C2PairedCompässoChannels:8"wideface,9/16"horizontallegswithhemsformedforattachmenttothe
mountingbracketcreatinga1-3/8"reveal;commercialqualitycold-rolled24-gaugesteel,factoryfinishedin(bakedenamelpaintfinish)()colorwithgrayinterior.
2. SplicePlate:steelinfinishtomatchtrimchannels;formedforsnap-fitinto8"channelends. 3. MountingBrackets:steelbracketsinmanufacturer’sstandardpaintedfinish,colorgray,formedforsnap-fitinto
8"channelsandattachedtohangerdevices. 4. 90°cornertrimpieces:tomatchC2PairedCompässoChannels. 5. Endcaps:tomatchC2PairedCompässoChannels. 6. AccessoryDeviceBracket:steelaccessoryanglein(large2-1/2")(small1-5/8"),tocoordinatewithelectrical. 7. HangerDevices:Turnbuckledevicesandaccessoriesfor(1/4"threadedrod)(1/32"diameteraircraftcable). F. ForspecificprojectdetailsandbillofmaterialsseeUSGInteriorDrawingNo.RTQ-__________(providedby
USGsalesrepresentative)
2.03 A. Trimchannels:EdgesformedtosnapontomountingbracketsandprovidepositivemechanicallockwithnoFabrication visiblefasteners.Factoryfinishedtomatchapprovedsamples. B. SplicePlates:Formedtosnapintoandprovidepositivelockbetweenabuttingchannelswithnovisiblefasteners.
Factoryfinishedtomatchtrimchannels. C. Mountingbrackets:Formedtosnapintotrimchannelsandprovidepositivemechanicallockwithnovisible
fastenerswhileprovidinginterfaceforhangingattachmentandintegrationoflightingorsignage.
Part 3: 3.01 A. Examineareastoreceivetrimsystemforconditionswhichwilladverselyaffectinstallation.Execution Inspection B. Donotstartworkuntilunsatisfactoryconditionsarecorrected.
C. Worktobeconcealed:Verifyworkabovesupportsystemiscomplete,tested,andandinstalledinamannerwhichwillnotaffectlayoutandinstallationofchannelsystem.
D. Fire-ratedassembly:Constructionabovechannelsystemshallmeetrequirementsasapplicabletoprovidefire-resistanceratingspecified.
3.02 A. Fielddimensions:Installermustverifyactualfielddimensionspriortoinstallation.Preparation B. Renovationwork:Installingcontractorshallverifythatexistingceilingstructureisadequatetosupportadditional
C2PairedCompässoChannelsystem. C. Coordination:Coordinateandscheduleinstallationofchannelsystemwithworkofothertradesaffectedbythis
installation,withparticularattentiongiventomechanicalandelectricalworkrequiredtobeinstalledandoperatingbeforeceilingworkcanbegin.Coordinateelectricalwithintegrationintochannelsystem,ifrequired.
38 Compässo Trim Systems Design Guide
C2 PairedCompässo Channels
39 Compässo Trim Systems Design Guide
3.03 A. Reference:Installinaccordancewithapprovedshopdrawingsandmanufacturer’sinstructions.Followarchitects’Installation detailsforthermalandbuildingexpansionjointtreatments. B. Hangerwires: 1. Spacing:Spacehangerwiresmaximum48”o.c.alongstraightsectionsandmaximum36”o.c.alongcurved
sectionsofchannels,orasnotedotherwisebymanufactureronshopdrawings.Attachdirectlytostructureabove.
2. Limitation:Donotsupporthangerwiresfrommechanicaland/orelectricalequipment,piping,orotherequipmentoccurringaboveceiling.
3. Provideadditionalfixturesupportasrequiredinaccordancewithlocalbuildingcodesorotherregulatoryagencies. C. C2PairedCompässoChannelsystem:Installaccordingtoprocedureprovidedbymanufacturerandinaccordance
withapprovedshopdrawings. D. Lightingcomponents:RefertoSection16________. E. AirDistributioncomponents:RefertoSection15________.
3.04 A. Deflectiononinstalledsystem:Maximumdeflectionshallnotexceed1/360ofthespan.Field Quality Control
40 Compässo Trim Systems Design Guide
Elegant Accents and Trim
Technical Service
800 USG.4YOUWebsite
usg.comSamples/Literature
888 874.2450Samples/Literature E-mail
[email protected]/Literature/Fax
888 874.2348Customer Service
800 950.3839
Manufactured by USG Interiors, Inc.550 West Adams StreetChicago, IL 60661
IC400/rev. 4-11© 2011, USG Interiors, Inc.Printed in U.S.A.
Safety First!Follow good safety/industrial hygiene practices during installation. Wear appropriate personal protective equipment.Read MSDS and literature before specification and installation.
NoteAll products described here may not be available in all geographic markets and are subject to change without notice. Consult your local sales office or representative for information.
TrademarksThe following are trademarks of USG Interiors, Inc. or a related company: Celebration, CentriCitee, COMPÄSSO, Donn, DX, DXW Fineline, Paraline, True Wood, USG, USG in stylized letters.
NoticeWe shall not be liable for incidental or consequential damages, directly or indirectly sustained, nor for any loss caused by application of these goods not in accordance with current printed instruction or for other than intended use. Our liability is expressly limited to replacement of defective goods. Any claim shall be deemed waived unless made in writing to us within thirty (30) days from the date it was or reasonably should have been discovered.