RANGE OF AIR-MET SERVICES

OCCUPATIONAL HEALTH, SAFETY & ENVIRONMENTAL MONITORING EQUIPMENT SPECIALISTS

Cut hereCut here

www.airmet.Com.au SaleS/Service 1800 000 744 rental 1300 137 067

air-met Scientific

NataCalibrations

With over 30 years of experience, Air-Met has the resources to address a wide range of occupational health, safety and environmental monitoring challenges. Our extensive range of products and services can be tailored to meet your specific needs.

Sales and LeasingAir-Met’s comprehensive range of products are sourced from a range of trusted and reputable suppliers worldwide. Finance and leasing options are available. Integrated SystemsAir-Met’s in house engineering team can assist you by providing a tailored and cost effective solution for your fixed gas and environmental monitoring requirements. Equipment RentalEnhance operational efficiency with an extensive range of instruments for both short and long term rental.

Equipment Service and MaintenanceAir-Met offers a range of services from instrument repairs, standard and NATA calibrations to total care packages.

On-Site Service and SupportReduce down time and avoid costly shipping charges by taking advantage of Air-Met’s on-site service and calibrations.

TrainingTraining programs are carried out by our team of knowledgeable and experienced experts either at your local Air-Met branch or on-site to educate and better equip your team.

Data ManagementAccess your sampling data 24 hours a day from the comfort of your office or mobile device with Air-Met’s Data Management Solutions.

ISO 9001 quality accredited and NATA accredited, Air-Met Service Facilities offers a range of popular calibration services for a variety of occupational health, safety and environmental monitoring equipment.

Why Have Your Instruments Serviced By A NATA Accredited Facility?

Having your instruments certified gives you certainty in knowing the true accuracy of your instrumentation. This means you can have increased confidence your readings are valid and correct which is especially important when being audited to meet legislated industry standards. A NATA endorsed certificate from Air-Met Scientific gives true measurement traceability back to national standards.

Air-Met’s NATA Accreditation No. 14926 Please refer to the NATA website for relevant scopes of accreditation.

Quality ISO 9001

work with confidence knowing that your instruments are accurate, reliable and fully functional with our Nata accredited service centres.

SV 11/2015

RANGE OF AIR-MET SERVICES

OCCUPATIONAL HEALTH, SAFETY & ENVIRONMENTAL MONITORING EQUIPMENT SPECIALISTS

Cut here

Cut here

www.airmet.Com.au SaleS/Service 1800 000 744 rental 1300 137 067

air-met Scientific

NataCalibrations

With over 30 years of experience, Air-Met has the resources to address a wide range of occupational health, safety and environmental monitoring challenges. Our extensive range of products and services can be tailored to meet your specific needs.

Sales and LeasingAir-Met’s comprehensive range of products are sourced from a range of trusted and reputable suppliers worldwide. Finance and leasing options are available. Integrated SystemsAir-Met’s in house engineering team can assist you by providing a tailored and cost effective solution for your fixed gas and environmental monitoring requirements. Equipment RentalEnhance operational efficiency with an extensive range of instruments for both short and long term rental.

Equipment Service and MaintenanceAir-Met offers a range of services from instrument repairs, standard and NATA calibrations to total care packages.

On-Site Service and SupportReduce down time and avoid costly shipping charges by taking advantage of Air-Met’s on-site service and calibrations.

TrainingTraining programs are carried out by our team of knowledgeable and experienced experts either at your local Air-Met branch or on-site to educate and better equip your team.

Data ManagementAccess your sampling data 24 hours a day from the comfort of your office or mobile device with Air-Met’s Data Management Solutions.

ISO 9001 quality accredited and NATA accredited, Air-Met Service Facilities offers a range of popular calibration services for a variety of occupational health, safety and environmental monitoring equipment.

Why Have Your Instruments Serviced By A NATA Accredited Facility?

Having your instruments certified gives you certainty in knowing the true accuracy of your instrumentation. This means you can have increased confidence your readings are valid and correct which is especially important when being audited to meet legislated industry standards. A NATA endorsed certificate from Air-Met Scientific gives true measurement traceability back to national standards.

Air-Met’s NATA Accreditation No. 14926 Please refer to the NATA website for relevant scopes of accreditation.

Quality ISO 9001

work with confidence knowing that your instruments are accurate, reliable and fully functional with our Nata accredited service centres.

SV 11/2015

NATA ACCREDITED FLOW METER AND AIR SAMPLING PUMP CALIBRATIONS ACCREDITED TO ISO/IEC 17025

NATA ACCREDITED GAS MONITOR CALIBRATIONSACCREDITED TO ISO/IEC 17025

NATA ACCREDITED INSPECTION AND OVERHAUL OF EXPLOSION PROTECTION EQUIPMENTACCREDITED TO ISO/IEC 17020

NATA accredited to ISO/IEC 17025 for the calibration of gas detection equipment, Air-Met Scientific can carry out traceable calibrations for all brands of gas detectors.

Air-Met’s Scope for the Calibration of Instruments includes:

> Gas Analysers

> CH4 with catalytic combustion detector

> CH4 with FID

> CH4 with infrared detector

> CH4 with Solid-State semiconductor detector

> CH4 with Thermal Conductivity detector

> C4H

8 with PID

> C5H

12 with catalytic combustion detector

> C6H

14 with catalytic combustion detector

> CO with electrochemical detector

> CO2 with infrared detector

> CO2 with electrochemical detector

> H2 with catalytic detector

> H2 with electrochemical detector

> H2S with electrochemical detector

> NH3 with electrochemical detector

> NO with electrochemical detector

> NO2 with electrochemical detector

> O2 with electrochemical detector

> SO2 with electrochemical detector

> Mine Safety Equipment (as listed under 7.75.01)

Air-Met Scientific now offers customers NATA accredited calibration and testing of air sampling pumps and flow meters.

Air-Met is also able to test air sampling pumps in accordance with the requirements of NATA’s Chemical Testing ISO/IEC 17025 Application Document – Annex K: Workplace Pump Calibration Checks.

Complying with the requirements of ISO/IEC 17020, Air-Met Scientific offers inspections and overhaul of electrical equipment for use in hazardous atmospheres.*

> NSW Mines License No.MLA110785

> ANZEx Certificate of Recognition No. ANZEx SF 11.5926 (Victoria) version 4

> ANZEx Certificate of Recognition No. ANZEx SF 15.5002 (Mackay) version 0

The Air-Met Scientific Service Benefits:

Australian owned and operated since 1984

6 service centres nationwide

ISO 9001 Certified

NATA endorsed documentation - Air-Met Scientific will provide NATA Calibration Certificates and associated reports where applicable

Fast turnaround

Calibration reminder service

Experienced and qualified service technicians in all service centres

Only certified Industrial Scientific Corporation service provider in Australia

On-site service available via mobile service vans

Refer to the NATA website for Air-Met’s scope of accreditation.

Air-Met’s NATA Accreditation No. 14926 Please refer to the NATA website for relevant scopes of accreditation.

For more information about Air-Met Scientific’s NATA calibration capabilities, please contact 1800 000 744 or visit www.airmet.com.au

*Inspection and overhaul is limited to the range of instruments detailed on Air-Met’s scope of accreditation.

With this capability, Air-Met is able to provide NATA endorsed calibrations of Defenders, DryCals, rotameters and other flowmeters against a primary standard.

FEATURES AND BENEFITS

NATA ACCREDITED FLOW METER AND AIR SAMPLING PUMP CALIBRATIONS ACCREDITED TO ISO/IEC 17025

NATA ACCREDITED GAS MONITOR CALIBRATIONSACCREDITED TO ISO/IEC 17025

NATA ACCREDITED INSPECTION AND OVERHAUL OF EXPLOSION PROTECTION EQUIPMENTACCREDITED TO ISO/IEC 17020

NATA accredited to ISO/IEC 17025 for the calibration of gas detection equipment, Air-Met Scientific can carry out traceable calibrations for all brands of gas detectors.

Air-Met’s Scope for the Calibration of Instruments includes:

> Gas Analysers

> CH4 with catalytic combustion detector

> CH4 with FID

> CH4 with infrared detector

> CH4 with Solid-State semiconductor detector

> CH4 with Thermal Conductivity detector

> C4H

8 with PID

> C5H

12 with catalytic combustion detector

> C6H

14 with catalytic combustion detector

> CO with electrochemical detector

> CO2 with infrared detector

> CO2 with electrochemical detector

> H2 with catalytic detector

> H2 with electrochemical detector

> H2S with electrochemical detector

> NH3 with electrochemical detector

> NO with electrochemical detector

> NO2 with electrochemical detector

> O2 with electrochemical detector

> SO2 with electrochemical detector

> Mine Safety Equipment (as listed under 7.75.01)

Air-Met Scientific now offers customers NATA accredited calibration and testing of air sampling pumps and flow meters.

Air-Met is also able to test air sampling pumps in accordance with the requirements of NATA’s Chemical Testing ISO/IEC 17025 Application Document – Annex K: Workplace Pump Calibration Checks.

Complying with the requirements of ISO/IEC 17020, Air-Met Scientific offers inspections and overhaul of electrical equipment for use in hazardous atmospheres.*

> NSW Mines License No.MLA110785

> ANZEx Certificate of Recognition No. ANZEx SF 11.5926 (Victoria) version 4

> ANZEx Certificate of Recognition No. ANZEx SF 15.5002 (Mackay) version 0

The Air-Met Scientific Service Benefits:

Australian owned and operated since 1984

6 service centres nationwide

ISO 9001 Certified

NATA endorsed documentation - Air-Met Scientific will provide NATA Calibration Certificates and associated reports where applicable

Fast turnaround

Calibration reminder service

Experienced and qualified service technicians in all service centres

Only certified Industrial Scientific Corporation service provider in Australia

On-site service available via mobile service vans

Refer to the NATA website for Air-Met’s scope of accreditation.

Air-Met’s NATA Accreditation No. 14926 Please refer to the NATA website for relevant scopes of accreditation.

For more information about Air-Met Scientific’s NATA calibration capabilities, please contact 1800 000 744 or visit www.airmet.com.au

*Inspection and overhaul is limited to the range of instruments detailed on Air-Met’s scope of accreditation.

With this capability, Air-Met is able to provide NATA endorsed calibrations of Defenders, DryCals, rotameters and other flowmeters against a primary standard.

FEATURES AND BENEFITS

NATA ACCREDITED FLOW METER AND AIR SAMPLING PUMP CALIBRATIONS ACCREDITED TO ISO/IEC 17025

NATA ACCREDITED GAS MONITOR CALIBRATIONSACCREDITED TO ISO/IEC 17025

NATA ACCREDITED INSPECTION AND OVERHAUL OF EXPLOSION PROTECTION EQUIPMENTACCREDITED TO ISO/IEC 17020

NATA accredited to ISO/IEC 17025 for the calibration of gas detection equipment, Air-Met Scientific can carry out traceable calibrations for all brands of gas detectors.

Air-Met’s Scope for the Calibration of Instruments includes:

> Gas Analysers

> CH4 with catalytic combustion detector

> CH4 with FID

> CH4 with infrared detector

> CH4 with Solid-State semiconductor detector

> CH4 with Thermal Conductivity detector

> C4H

8 with PID

> C5H

12 with catalytic combustion detector

> C6H

14 with catalytic combustion detector

> CO with electrochemical detector

> CO2 with infrared detector

> CO2 with electrochemical detector

> H2 with catalytic detector

> H2 with electrochemical detector

> H2S with electrochemical detector

> NH3 with electrochemical detector

> NO with electrochemical detector

> NO2 with electrochemical detector

> O2 with electrochemical detector

> SO2 with electrochemical detector

> Mine Safety Equipment (as listed under 7.75.01)

Air-Met Scientific now offers customers NATA accredited calibration and testing of air sampling pumps and flow meters.

Air-Met is also able to test air sampling pumps in accordance with the requirements of NATA’s Chemical Testing ISO/IEC 17025 Application Document – Annex K: Workplace Pump Calibration Checks.

Complying with the requirements of ISO/IEC 17020, Air-Met Scientific offers inspections and overhaul of electrical equipment for use in hazardous atmospheres.*

> NSW Mines License No.MLA110785

> ANZEx Certificate of Recognition No. ANZEx SF 11.5926 (Victoria) version 4

> ANZEx Certificate of Recognition No. ANZEx SF 15.5002 (Mackay) version 0

The Air-Met Scientific Service Benefits:

Australian owned and operated since 1984

6 service centres nationwide

ISO 9001 Certified

NATA endorsed documentation - Air-Met Scientific will provide NATA Calibration Certificates and associated reports where applicable

Fast turnaround

Calibration reminder service

Experienced and qualified service technicians in all service centres

Only certified Industrial Scientific Corporation service provider in Australia

On-site service available via mobile service vans

Refer to the NATA website for Air-Met’s scope of accreditation.

Air-Met’s NATA Accreditation No. 14926 Please refer to the NATA website for relevant scopes of accreditation.

For more information about Air-Met Scientific’s NATA calibration capabilities, please contact 1800 000 744 or visit www.airmet.com.au

*Inspection and overhaul is limited to the range of instruments detailed on Air-Met’s scope of accreditation.

With this capability, Air-Met is able to provide NATA endorsed calibrations of Defenders, DryCals, rotameters and other flowmeters against a primary standard.

FEATURES AND BENEFITS

RANGE OF AIR-MET SERVICES

OCCUPATIONAL HEALTH, SAFETY & ENVIRONMENTAL MONITORING EQUIPMENT SPECIALISTS

Cut here

Cut here

www.airmet.Com.au SaleS/Service 1800 000 744 rental 1300 137 067

air-met Scientific

NataCalibrations

With over 30 years of experience, Air-Met has the resources to address a wide range of occupational health, safety and environmental monitoring challenges. Our extensive range of products and services can be tailored to meet your specific needs.

Sales and LeasingAir-Met’s comprehensive range of products are sourced from a range of trusted and reputable suppliers worldwide. Finance and leasing options are available. Integrated SystemsAir-Met’s in house engineering team can assist you by providing a tailored and cost effective solution for your fixed gas and environmental monitoring requirements. Equipment RentalEnhance operational efficiency with an extensive range of instruments for both short and long term rental.

Equipment Service and MaintenanceAir-Met offers a range of services from instrument repairs, standard and NATA calibrations to total care packages.

On-Site Service and SupportReduce down time and avoid costly shipping charges by taking advantage of Air-Met’s on-site service and calibrations.

TrainingTraining programs are carried out by our team of knowledgeable and experienced experts either at your local Air-Met branch or on-site to educate and better equip your team.

Data ManagementAccess your sampling data 24 hours a day from the comfort of your office or mobile device with Air-Met’s Data Management Solutions.

ISO 9001 quality accredited and NATA accredited, Air-Met Service Facilities offers a range of popular calibration services for a variety of occupational health, safety and environmental monitoring equipment.

Why Have Your Instruments Serviced By A NATA Accredited Facility?

Having your instruments certified gives you certainty in knowing the true accuracy of your instrumentation. This means you can have increased confidence your readings are valid and correct which is especially important when being audited to meet legislated industry standards. A NATA endorsed certificate from Air-Met Scientific gives true measurement traceability back to national standards.

Air-Met’s NATA Accreditation No. 14926 Please refer to the NATA website for relevant scopes of accreditation.

Quality ISO 9001

work with confidence knowing that your instruments are accurate, reliable and fully functional with our Nata accredited service centres.

SV 11/2015