utg-8 ultrasonic thickness gauge
TRANSCRIPT
Simple, Smart, Effective!Simple, Smart, Effective!
UTG-8UTG-8
Easy as 1-2-3Easy as 1-2-3
Connect the probe Calibrate on a built-in block Switch modes andview readings
11 22 33
Keys legendKeys legend
Switch instrument ON and OFF
Probe zeroing
Run calibration
Switch between Metric and English units
Switch Measure / Scanning modes.Increase current value
Switch backlight mode.Decrease current value.
UTG-8 characteristicsUTG-8 characteristics• Measurement range (steel): 0,63 – 500 mmMeasurement range (steel): 0,63 – 500 mm
• Sound velocities range: 1250 - 10000 m/sSound velocities range: 1250 - 10000 m/s
• Discreetness: 0,01 mm; .001 in; Discreetness: 0,01 mm; .001 in;
1 m/s; .0001 in/us1 m/s; .0001 in/us
• Accuracy: .001 in; 0,03 mmAccuracy: .001 in; 0,03 mm
• Dimensions: Dimensions: 35×70×12535×70×125 mm mm
• Weight: 176 gWeight: 176 g
Probe zeroingProbe zeroing
1 point calibration1 point calibration
Setting of the known velocitySetting of the known velocity
2 points calibration2 points calibration
“MEASUREMENT” mode is used for discrete points measurements. Reading stays onscreen after removing of the probe from the object.
ModeMode « «MEASUREMENTMEASUREMENT»»
Mode Mode ««SCANNINGSCANNING»»
“SCANNING” mode is used for corrosion or other thin areas search. The minimum thickness over all scanning process is displayed after removing the probe from the object.