utscan 100-2
DESCRIPTION
dvTRANSCRIPT
-
UTSCAN-100
Multi-channel ultrasonic instrument
for flaw inspection and evaluations
Multi-channel fill-featured ultrasonic instrument with up to 32 channels and
programmable I/O parts
Multi-channel instrument with I/O visual alarm display for each channel
-
Introduction The UTScan-100 is an all-in-one, full-featured PC based industrial ultrasonic instrument for in factory usage. Employing 32-bit PCI architecture, instrument operation is made fast and easy via windows based inspection screens and intuitive dialogue boxes for ultrasonic setup. Configurable with either single or multi-channel front-end square wave pulser/receivers, the UTScan-100 is expandable up to 32 independent ultrasonic channels and programmable I/O ports. The UTScan-100 delivers: 95dB true instrument gain, 50dB DAC, 35MHz analog bandwidth and ample storage for virtually an unlimited number of setup files for different transducers and inspection plans.
Product applications Flaw detection in metals, composites andplastic materials, Wall and clad thickness measurements A and B-scan evaluation Typical applications include: Forgings Billets Plates Rolls Pipes Automotive Train rail and wheel Main features
1 - 45MHz analog bandwidth
100Msamp/sec single-shot sampling rate
Up to four channels parallel firing capability for high-speed, high-PRF inspection
Selection of RPP3 or RPP4 square-wave pulser preamplifier
95dB true instrument gain, 0.2dB gain increment, 1dB gain linearity
50dB DAC with 160nsec step size, 40dB/Sec slew rate, 500K steps
Four hardware gates per channel. Up to 32 gates
Dynamic backwall tracking with backwall attenuator
Programmable time-tagging for accurate time-of-flight measurements
Full A-scan data capture in double-word mode
Parallel, VGA, PS2 keyboard and mouse ports
Storage and export A-scan signals
Programmable I/O ports
Internal hard disk storage
MCIO user interface
Multi-language capabilities
-
Software for instrument UTScan-100 set-up and display, application control, flaw evaluation, measurement and documentation, with the full multi-tasking capability of Windows. All instrument functions directly accessible from the Toolbox with easy-to-learn, easy-to-use application tailored operator interfaces.
Intuitive dialog box for ultrasonic parameters setting
gain
Time base ; delay and range
Receiver for mode and frequency
Multi channel
setup display
Setting pulse width allows increasing the near resolution
surface
-
TCG Time corrected gain for the first flat bottom hole of the near surface entrance
TCG Time corrected gain for the last bottom hole
-
All instrument hardware uses gate peak detection circuitry to ensure reliable and repeatable gate data acquisition.
Gates dialog and A-scan
gates display
Gates threshold
Gates data
-
Tools for signal evaluation of the A Scan
Bscan display
Locator dialog box and screen
display during settings
-
The display functions are used to change the appearance of the A-scan display and displaying advanced measurement tools
Save and storage of TCG and gates setting files
-
UTSCAN-100 T E C H N I C A L S P E C I F I C A T I O N S
Overall Analog Performance
Analog bandwidth,
receiver
1 to 35MHz (-3dB)
Calibrated gain 96.2dB
Full screen sensitivity 32V peak to peak
Equivalent input noise
4nV/Hz
Linearity 1dB
Channels
Number of channels 1 to 32
Channel triggering Internal or external
RPP3- Pulser Characteristics
Excitation Square wave
Amplitude 8 levels
Max. pulse
amplitude, 50 load
350V + 10% (HR)
PRF 1 to 20HKHz
Damping 8 settings
Stability 2% FSH
Flatness 0.5dB
Mode PE, TT, Fire Twice, Fire Next
Pulse fall time 60dB @ 5MHz
Burst 1,2,3,4
Preamplifier Characteristics
Programmable gain 0, 15, 30, 45dB
Output voltage 2.0Vp-p
Frequency Filters
Number and type of filters
7 band pass
Time Base
Range 2) 3)
100nsec to 10msec
Delay plus range2) 3)
0nsec to 10msec
Resolution 2)
10nsec
Hardware Gates
Number Up to 32 / ch
Modes Master or slave
Range 2) 3)
10nsec to 10msec
Resolution 3) 10nsec
Peak detection Positive, negative or absolute
Alarm threshold Positive, negative or absolute
Dynamic gate Backwall echo tracking in last gate
DAC (TCG)
Dynamic range 51.2dB
Amplitude resolution 0.2dB
Number of steps 1 to 256
Step width 3) 160nsec
Pkosition resolution 3) 10nsec (first step)
Slew rate 20dB/160nsec
Interpolation Linear Interpolation
Last gate attenuator Back wall echo attenuation
Analog to Digital Conversion
Resolution 10 bit (8 bit effective)
Sampling rates 12.5,25,50,100,200 (interleave) MSPs
High Speed Buffer 1 Mbyte
Data acquisition speed
Peak amplitude and time of flight
Up to 132K measurements/sec
A-scan capture Up to 80MByte/sec continuous
Computer, Data Storage and Display
CPU Pentium IV 2.8G
RAM 512MB
Hard disc drive 36G SCSI
Floppy disk drive 1.44MByte
Control device Keyboard, mouse
Removable mass storage device
CDR
Interfaces
Standard External VGA, USB, LAN
Printer, Dual serial
Optional 2 or 16 port digital I/0
Dual encoder
MODEM
2 or 8 Ch. D/A
2 or 8 Ch. A/D
General
Power requirements 115V or 230V 10%
48-63Hz, 250VA
Operating temperature range
5 to 40C RPP3,4 4)
5 to 35C - usc-100
Humidity 80% non-condensing
Dimensions 440mm x 180mm x 460mm - W:H:D
Weight, single channel version
10Kg (22Lbs)
1) 1 - 6 ch. in Fire Twice mode.
2) With standard 24K buffer. Maximum range and delay doubled with 48K buffer.
3) At 100MSamp/sec sampling
frequency. 4)
Mounted externally.
www.cmseddyscan.com contactcms@ cmseddyscan.com Modifications reserved