UXO Goniometer-6 Parts Layout The UXO Goniometer is a device to hold specimen UXO objects at specified positions. It rotates the target in 10 degree increments It elevates the target in 50mm increments. It translates the target in 100mm increments It is made of Plywood, Nylon, and Glue. Do NOT use metal fasteners or conductive materials of any kind. It operates in a sensitive magnetic environment. Following, is a parts layout with material callouts and Waterjet prep. UXO Goniometer-6 Parts Layout 2 Final Assembly Goniometer Stand Floor Grid Holder Assembly Jaw Sets UXO Goniometer-6 Parts Layout 3 Stand assembly and Waterjet Layout UXO Goniometer-6 Parts Layout 4 Stand assembly Waterjet Layout 3 ea. x 4 xx 8 Multiply Plywood (No voids) UXO Goniometer-6 Parts Layout 5 Waterjet Profile - Stand assembly Goni-6_Stand-Layout.dxf Available atMaterial; 3 ea. x 4 xx 8 Multiply Plywood (No voids) UXO Goniometer-6 Parts Layout 6 Stand assembly Hardware Set 4 ea. -13 X 17 long Nylon All-thread 8 ea. -13 Nylon nuts 8 ea. -13 Wing nuts, optional 2 ea. 1.01OD x 4 long Fiberglass Rod (Not as shown) 5 ea. -13 X 6.5 long Nylon All-thread 10 ea. -13 Nylon nuts UXO Goniometer-6 Parts Layout 7 Floor Grid Assembly and Waterjet Layout UXO Goniometer-6 Parts Layout 8 Floor Grid Waterjet Layout 2 ea. x 4 x 8 Melamine, White both sides UXO Goniometer-6 Parts Layout 9 Waterjet Profile - Floor assembly Available at :Goni-6_Floor-Layout.dxfMaterial: 2 ea. x 4 x 8 Melamine, White both sides UXO Goniometer-6 Parts Layout 10 Holder Assembly and Waterjet Layout Hardware Set JawSet Waterjet Layout Holder assembly Waterjet Layout Holder assembly Custom JawSets UXO Goniometer-6 Parts Layout 11 Holder Assembly Hardware Set 6 ea. -13 X long Nylon All-thread 24 ea. -13 Nylon nuts 12 ea. -13 Wing nuts, optional 2 ea. 1.01OD x 2 long Fiberglass Rod UXO Goniometer-6 Parts Layout 12 Holder assembly Waterjet Layout 4 x 8 x Multiply Plywood (Many plys, no voids) This layout provides 5 Holder assemblies per sheet UXO Goniometer-6 Parts Layout 13 Waterjet Profile - Holder assembly Available at :Goni-6_Holder-Layout.dxf Material: 1 ea. 4 x 8 x Multiply Plywood (MAKES 5 ASSEMBLIES) UXO Goniometer-6 Parts Layout 14 Jaw set Waterjet Blanks Polyethylene packing foam Various sizes: 2 Thick 3 thick and 4 thick Blank JawSet.50 Cal Jaws 30mm Jaws 100mm Jaws Custom profiles are cut manually by bandsaw UXO Goniometer-6 Parts Layout 15 Waterjet Profile - JawSet Blanks Goni-6_Jaw-Layout.dxf Available at :Material: Polyethylene packing foam Various sizes: 2 Thick 3 thick and 4 thick UXO Goniometer-6 Parts Layout 16 Bill of Materials Stand assembly 4 ea. -13 X 17 long Nylon All-thread 5 ea. -13 X 6.5 long Nylon All-thread 18 ea. -13 Nylon nuts 8 ea. -13 Nylon Wing nuts, optional 2 ea. 1.01OD x 4 long Fiberglass Rod 3 ea. x 4 xx 8 Multiply Plywood (No voids) Holder assembly 1 ea. 4 x 8 x Multiply Plywood (MAKES 5 ASSEMBLIES) (Parts required for each holder assembly) 6 ea. -13 X long Nylon All-thread 24 ea. -13 Nylon nuts 12 ea. -13 Wing nuts, optional 2 ea. 1.01OD x 2 long Fiberglass Rod Floor Grid assembly 2 ea. x 4 x 8 Melamine, White both sides JawSet Blanks Polyethylene packing foam Various sizes: 2 Thick 3 thick and 4 thick UXO Goniometer-6 Parts Layout 17 Installed at RFS BUD Heavy detector Tank at RFS Goniometer Stand Floor Grid Holder Assy Jaw Sets UXO Goniometer-6 Parts Layout 18 RFS Installation