v-dimmer-3 · 2019-03-28 · 2. make sure polarity (+ & -) and input/output wiring is correct...
TRANSCRIPT
Brownie | Architectural LED Lighting82
Pro
ject List Pro
du
ct Su
mm
ary V-C
ove V-C
ove II P23 &
P46
V-C
ove II RG
B V
-Tun
e-X D
ot-Less 1-2 D
ot-Less II D
ot-Less II R
GB
V-S
pectra V
-Wash
II V-W
ash II R
GB
W V
-Wid
e Dim
mers
Colour Temperature Tunable LED(using 2-channel out of 3-channel of the driver)
RGB LED Fixture(making full use of 3-channel output)
VARIOUS DIMMING (BRIGHTNESS) SETTING UNDER DMX SYSTEM
SPECIFICATION
Input Voltage12Vdc~24Vdc (Input Voltage = Output Voltage)
Input Signal DMX / or 0-10V
Maximum Load Current 6A (2A max. per each channel @25°C)
Operating Temperature 0°C~+45°C
Storage Temperature -20°C~+50°C
Casing Dimension 110mm x 60mm x 18mm (H)
No of Channel Three (typically for RGB)
Connection Pheonix Connectors
Ingress Protection IP20
Listing CE Certified
Weight 170 grams
■ DMX Interface for 3-channel (typical for RGB LED)
■ Constant-voltage 12-24Vdc (for input & output)
■ No flickering ■ Robust metal casing with powder coating ■ Maximum current: 6A for total 3-channel
(2A per channel) ■ Address setting with DIP Switches ■ Synchronize up to 32 units with built-in
program ■ DMX mode and Auto-mode (built-in
program) are available
FEATURES
(DMX Interface 3-Channel Dimming Interface Driver Unit)
V-Dimmer-3
www.brownie-led.com 83
Dim
mer
s
V
-Wid
e
V
-Was
h II
RG
BW
V-W
ash
II
V
-Sp
ectr
a
D
ot-
Less
II R
GB
Do
t-Le
ss II
Do
t-Le
ss 1
-2
V
-Tu
ne-
X
V
-Cov
e II
RG
B
V
-Cov
e II
P23
& P
46
V
-Cov
e
Pro
du
ct S
um
mar
y
Pro
ject
Lis
t
Caution
1. Do not place the V-Dimmer directly on top of AC-DC power supply unit or any other high-temperature equipment.2. Make sure polarity (+ & -) and input/output wiring is correct before switching on power.
(Continuous switching on with reverse polarity, short-circuit or overcurrent could cause damage on components.)3. Make sure all the connector terminals are firmly inserted into the body of V-Dimmer.4. Maximum load for 3-channel in total must not exceed rated current of 6A. Each channel must not exceed 3A.
(As to maximum series connection length of LED, refer to individual spec of LED fixture.)
Under 0-10V System2
Under DMX System1
WIRING DIAGRAM