DEALERS MEETINGJUNE 28 2012

3 VERTICAL MIXERS

Product improvements

VERT

ICAL

MIX

ER :

FATM

IXFATMIX

THE FATMIX WAS BUILT:

• TO PROVIDE MORE CLEARANCE AROUND THE AUGER (FOR CHOPPING OF LARGE ROUND BALES)

• WHILE HAVING A LOW PROFILE TO ALLOW LOADING BY A "SKID STEER“ LOADER

FATMIX CAN :

• CHOP 5’ DIAMETER ROUND BALES FASTER THAN ANY OTHER BRAND ON THE MARKET THANKS TO :

• A 105’’ DIAMETER FLOOR

Which is 12’’ wider than V-Mix 575 or 650 cubic feet models( with rubber extension). Two models known for their efficiency in the treatment of large size bales

• HAS A CAPACITY OF 415 OR 485 CUBIC FEET (WITH RUBBER EXTENSION) WITH MANY ADVANTAGES:

• A LARGE SPACE AROUND THE AUGER• VERY STEEP VERTICAL WALLS

Which is a considerable advantage because this configuration allows the bales down to the bottom faster and guarantees chopping them in record time

FEATURES

VERTICAL MIXER : FATMIX

VERTICAL MIXER : FATMIXCONSIDERING ITS 111‘’ WIDTH, THE V-MIX 485 (FATMIX) IS ONLY AVAILABLE WITH THE FRONT UNLOADING OPTION!

VERTICAL MIXER : FATMIX

LIKE ALL VALMETAL MOBILE MIXERS, THE FATMIX BASE IS AN INDEPENDENT TRAILER

AND ITS FRAME IS MADE OF HEAVY WALL TUBING

THE TUB IS MOUNTED ON 4 LOAD CELLS

VERTICAL MIXER : FATMIX

THIS V-MIX FATMIX 485 MODEL WAS SOLD TO A FARMER IN NEW-BRUNSWICK

THIS V-MIX MODEL WAS BUILT WITH A SECOND PUSH ARM FOR UNLOADING IN A

BELT FEEDER.

THIS SECOND PUSH ARM IS HIGHLY EFFECTIVE BECAUSE THE MIXTURE IS

EJECTED MORE UNIFORMLY AND, TWICE PER REVOLUTION.

HOWEVER, IT USES AT LEAST 10 HP MORE THAN A SINGLE PUSH ARM

MANY TESTS WERE PERFORMED AT THE REQUEST OF CUSTOMERS. INCLUDING

THE USE OF TWO 5‘ BALES, EACH WEIGHING NEARLY 700 KG (1600 LBS) TO

IDENTIFY THE NECESSARY HP

VERTICAL MIXER

NEW AUGER CONFIGURATION - HORIZONTAL KNIVES FOR ALL V-MIX MODELS

OLD MODEL OF AUGER

NEW MODEL OF AUGER

VERTICAL MIXER

NEW DESIGN OF PUSHING ARM FOR ALL MODELS V-MIX AUGERS

NEW SHARP EDGE TO REDUCE FRICTION

KICKER (TAKES A MINIMUM OF 10

HP MORE)

VERTICAL MIXER

FORMER POSITION OF "RESTRICTOR" FOR ALL V-MIX MODELS

OUTSIDE VIEW

INSIDE VIEW

VERTICAL MIXER

OLD VS NEW POSITIONING OF THE RESTRICTOR FOR ALL V-MIX MODELS

8,5’’

24’’

OLD POSITIONING NEW POSITIONING

VERTICAL MIXER

NEW POSITIONING OF THE RESTRICTOR FOR ALL V-MIX MODELS

OUTSIDE VIEW

INSIDE VIEW

VERTICAL MIXER : V-MIX 700 - TEST

SEE THE FOLLOWING VIDEO ...

EXPERIMENT PERFORMED WITH A V-MIX 700 FOR MIXING AS LITTLE

AS A 300 KG (650 LBS) RECIPE

VERTICAL MIXER : V-MIX 700 STATIONARY

• IDEAL FOR LARGE HERDS• ALSO EFFICIENT FOR SMALL

GROUPS• OPTIONAL SECOND PUSH

ARM

V-MIX 700 (2 AUGERS) - 100 HP (600 VOLTS)

VERTICAL MIXER

V-MIX 700 STATIONARY - 100 HP (600 VOLT, 2 AUGERS)

2 PUSH ARMS

VERTICAL MIXER: V-MIX 400 2.0 STATIONARY 1000 RPM PLANETARY TRANSMISSION

AVAILABLE WITHOUT 2 SPEED TRANSMISSION (AND 1000 RPM

PLANETARY TRANSMISSION) WHICH GENERATES A

REDUCTION IN COST OF $ 1600.00

VERTICAL MIXER : V-MIX 700 2.0 (2 AUGERS) MOBILE

LOWER WHICH ALLOWS LOADING BY A "SKID STEER“ LOADER

VERTICAL MIXER : V-MIX 700 2.0 (2 AUGERS) MOBILE

230, BOULEVARD INDUSTRIELSAINT-GERMAIN-DE-GRANTHAM, QUÉBECJ0C 1K0, CANADA

PHONE : 819-395-4282FAX : 819-395-2030INFO@VALMETAL.COM

VALMETAL FOR INFORMATIONS