V-Twin Audio Speaker Pod (VTSP)

Step 1. Install clamps loosely on handlebars. Spacing in between the inside edges of the clamps should be 5.75".

Step 2. Tighten the front bolts on both clamps until the front of the clamp completely closes.

Step 3. Place speaker pod on top of clamps and install the two button head bolts with washers through the pod into the threaded holes of top of the clamps.

Step 4. Tighten button head bolts and crush the washer until pod is secure.

Step 5. Tighten the two remaining bolts in the clamps to secure in position.