v25t - swep · swep v25t sc s sc m nsc s nsc m nc m 4+(2,25×nop) mm 2,13+(0,208×nop) kg...
TRANSCRIPT
Connections*
Externally threaded
Internally threaded
Soldering Internally threadedhexagonal exterior
*For specifi c dimensions, or information about other types of connections, please contact your SWEP sales representative.
Size Height of plate pack Total weight
Materials Channel plate Brazing
SC Stainless steel Copper
NC Stainless steel Copper
NSC Stainless steel Copper
The versatile V25T delivers efficient heat exchange solutions across a wide capacity interval, and is quick and simple to adapt for numerous applications. The product’s versatility and excellent heat transfer make it perfect for demanding cooling applications and as a reversible condenser and cascade in two-phase applications. The V-ring refrigerant distribution system ensures optimal performance as an evaporator in both counter- and co-current configurations and with larger plate packs.
Victaulic
Pressure classesS Standard, evaluated per EN 13345.M Medium, evaluated per EN 13345.H High, evaluated per EN 13345.
Max number of plates (NoP) Port size F1/P1 Port size F2/P2 Port size F3/P3 Port size F4/P4 Max volume fl ow Channel volume (SI) Channel volume (US)
www.swep.net
CH
ALLE
NG
E EF
FIC
IEN
CY
SWEP V25T
SC SSC M
NSC SNSC MNC M
4+(2,25×NoP) mm 2,13+(0,208×NoP) kg
0.157+(0.089×NoP) in 4.69+(0.457×NoP) lb
SC H 8+(2,25×NoP) mm 3,91+(0,208×NoP) kg
0.315+(0.089×NoP) in 8.61+(0.457×NoP)
F1 F2
F3 F4
526 (
20.71
)
470 (
18.5)
119 (4.69)
63 (2.48)
14024 mm (0.945 in)24 mm (0.945 in)24 mm (0.945 in)24 mm (0.945 in)
9 m³/h (39.6 gpm)0,111 dm3
0.00392 ft3
Third party approvalsSWEP BPHEs are generally approved by listed below certifi cation organizations:Europe, Pressure Equipment Directive (PED)America, Underwriters Laboratories Inc (UL)Japan, Kouatsu-Gas Hoan Kyoukai (KHK)Additionally SWEP holds approvals from a vast variety of other certifi cation organizations. For approval information regarding a specifi c product please contact your local SWEP representative. SWEP reserves the right to make changes without prior notice.
The BPHE conceptThe Brazed Plate Heat Exchanger (BPHE) is constructed as a plate package of corrugated channel plates with a fi ller material between each plate. During the vacuumbrazing process, the fi ller material forms a brazed joint at every contact point between the plates, creating complex channels. The BPHE allows media at diff erent temperatures to come into close proximity, separated only by channel plates that enable heat from one media to be transferred to the other with very high effi ciency. The concept is similar to other plate and frame technology, but without the gaskets and frame parts.
Cover platePlate package
Connections
Cover plateChannel plates
Zero hole channel plate
SSP calculation softwareWith SWEP’s unique SSP, the SWEP Software Package, you can do advanced heat transfer calculations yourself, and choose the product solution that suits your application best. It’s also easy to choose connections and generate drawings of the complete product. If you would like advice, or you would like to discuss diff erent product solutions, SWEP off ers all the service and support your need.
Material disclaimerThe information and recommendations in regards to the products are presented in good faith, however, SWEP makes no representations or warranties as to the completeness or accuracy of the information. Information is supplied upon the condition that the purchasers will make their own determination as to the products’ suitability for their purposes prior to use. Purchasers should note that the properties of the products are both application and material selection dependent and that products containing stainless steel are still subject to corrosion if used in unsuitable environments.
www.swep.net
CH
ALLE
NG
E EF
FIC
IEN
CY
Connections
Channel plates
Zero hole channel plate
SWEP V25T
SC-S, SC-MASME
550570590610630650670690
(PSI)
-320.8 400 (°F)
UL
43
44
45
46(bar)
-196 204 (°C)
-196 20 50 100 135 150 175 200 225
(bar)
(°C)
PEDPressure M circuit 1Pressure M circuit 2 Pressure S
-320.8 68 122 212 275 302 347 392 437 (°F)
(PSI)
40
42
44
46
48
50
-196 250
(bar)
(°C)
ASME
580600620640660680700720
-320.8 482
(PSI)
(°F)
26283032343638404244464850525456
Pressure H
380420460500540580620660700740780820
-320.8-196 20 50 100 150 200 225 250 300 350 (°C)
68 122 212 302 392 437 482 572 662 (°F)
8
9
10
11
12
13
14
15(bar)
110120130140150160170180190200210220
(PSI)PED
SC-MUL
550570590610630650670690
(PSI)
-320.8 400 (°F)
UL
43
44
45
46(bar)
-196 204 (°C)
-196 20 50 100 135 150 175 200 225
(bar)
(°C)
PEDPressure M circuit 1Pressure M circuit 2 Pressure S
-320.8 68 122 212 275 302 347 392 437 (°F)
(PSI)
40
42
44
46
48
50
-196 250
(bar)
(°C)
ASME
580600620640660680700720
-320.8 482
(PSI)
(°F)
26283032343638404244464850525456
Pressure H
380420460500540580620660700740780820
-320.8-196 20 50 100 150 200 225 250 300 350 (°C)
68 122 212 302 392 437 482 572 662 (°F)
8
9
10
11
12
13
14
15(bar)
110120130140150160170180190200210220
(PSI)PED
SC, NC, NSCPED
550570590610630650670690
(PSI)
-320.8 400 (°F)
UL
43
44
45
46(bar)
-196 204 (°C)
-196 20 50 100 135 150 175 200 225
(bar)
(°C)
PEDPressure M circuit 1Pressure M circuit 2 Pressure S
-320.8 68 122 212 275 302 347 392 437 (°F)
(PSI)
40
42
44
46
48
50
-196 250
(bar)
(°C)
ASME
580600620640660680700720
-320.8 482
(PSI)
(°F)
26283032343638404244464850525456
Pressure H
380420460500540580620660700740780820
-320.8-196 20 50 100 150 200 225 250 300 350 (°C)
68 122 212 302 392 437 482 572 662 (°F)
8
9
10
11
12
13
14
15(bar)
110120130140150160170180190200210220
(PSI)PED