vapour compression cycle
TRANSCRIPT
![Page 1: vapour compression cycle](https://reader036.vdocument.in/reader036/viewer/2022083104/588136561a28ab00438b7a93/html5/thumbnails/1.jpg)
![Page 2: vapour compression cycle](https://reader036.vdocument.in/reader036/viewer/2022083104/588136561a28ab00438b7a93/html5/thumbnails/2.jpg)
VAPOUR COMPRESSION CYCLE
R & AC
Hashim Hasnain Hadi 13ME36
6TH Semester B.E Mechanical
Prepared By :-
![Page 3: vapour compression cycle](https://reader036.vdocument.in/reader036/viewer/2022083104/588136561a28ab00438b7a93/html5/thumbnails/3.jpg)
OBJECTIVES:
Introduction of refrigeration
Strengthen the knowledge about refrigeration cycles
Study the basics of an ideal refrigeration cycle
![Page 4: vapour compression cycle](https://reader036.vdocument.in/reader036/viewer/2022083104/588136561a28ab00438b7a93/html5/thumbnails/4.jpg)
VAPOR-COMPRESSION REFRIGERATION CYCLE
►There are four principal control volumes involving these components:►Evaporator►Compressor►Condenser►Expansion valve
►Most common refrigeration cycle in use today
All energy transfers by work and heat are taken as positive in the directions of the arrows on the schematic and energy balances are written accordingly.
Two-phaseliquid-vapor mixture
![Page 5: vapour compression cycle](https://reader036.vdocument.in/reader036/viewer/2022083104/588136561a28ab00438b7a93/html5/thumbnails/5.jpg)
Process 4-1: two-phase liquid-vapor mixture of refrigerant is evaporated through heat transfer from the refrigerated space.Process 1-2: vapor refrigerant is compressed to a relatively high temperature and pressure requiring work input.Process 2-3: vapor refrigerant condenses to liquid through heat transfer to the cooler surroundings.Process 3-4: liquid refrigerant expands to the evaporator pressure.
►The processes of this cycle are
Two-phaseliquid-vapor mixture
![Page 6: vapour compression cycle](https://reader036.vdocument.in/reader036/viewer/2022083104/588136561a28ab00438b7a93/html5/thumbnails/6.jpg)
T-S DIAGRAM
![Page 7: vapour compression cycle](https://reader036.vdocument.in/reader036/viewer/2022083104/588136561a28ab00438b7a93/html5/thumbnails/7.jpg)
The area under the curve for the process 4-1 represents the heat absorbed from the refrigeration space.
Area under the curve 2-3 represented the heat rejected to the surrounding.
COP improves by 2-4% for each compressor if the evaporating temperature is raised or the condensing temperature is lowered
![Page 8: vapour compression cycle](https://reader036.vdocument.in/reader036/viewer/2022083104/588136561a28ab00438b7a93/html5/thumbnails/8.jpg)
P-H DIAGRAM► The pressure-enthalpy (p-h) diagram is a thermodynamic
property diagram commonly used in the refrigeration field.
![Page 9: vapour compression cycle](https://reader036.vdocument.in/reader036/viewer/2022083104/588136561a28ab00438b7a93/html5/thumbnails/9.jpg)