variable flange motors dmva liebherr components … · and has a very high power density, making it...
TRANSCRIPT
Short Description
Variable Flange Motors DMVALiebherr Components
From A to Z – the components division of the Liebherr Group offers a broad range of solutions in the area of mechanical, hydraulic, electric and electronic drive system and control technology. The efficient components and systems are pro-duced at a total of ten production sites around the world to the highest standards of quality. Central contact persons for all product lines are available to our customers at Liebherr-
Components AG and the regional sales and distribution branches.
Liebherr is your partner for joint success: from the product idea to development, manufacture and commissioning right through to customer service solutions like remanufacturing.
components.liebherr.com
Gas engines Diesel engines Fuel injection systems Axial piston hydraulics Hydraulic cylinders
Human-machine interfacesand gateways
Control electronics and sensor technology
Power electronics Control cabinets Software
Slewing bearings Gearboxes and winches Electric machines Remanufacturing
Liebherr-Components AGPost box 222, CH-5415 Nussbaumen / AG +41 56 296 43 00 [email protected]
Liebherr USA, CO.1465 Woodland Drive, Saline, MI 48176, USA +1 734 944 63 34 [email protected]
The Liebherr axial piston motors DMVA series have a swash plate design for the open and closed circuit and were specially developed for use in mobile machinery in harsh environments.
The inverse drive with a swivel angle of 22° is very efficient and has a very high power density, making it ideal for appli-cations that require an adjustable displacement.
The variable flange motors are available in nominal sizes ranging from 108 to 370. The nominal pressure is 450 bar and the maximum pressure is 500 bar absolute.
The optional through-drive can be used for mounting a brake or tandem motor.
The DMVA series is available with the most common controls. Speed sensor or preparation for speed sensor available on request.
Valid for:DMVA 108DMVA 165DMVA 215DMVA 370
Features:Series DOpen and closed circuit
Regulator types:Various regulator types can be selected
Pressure range:Nominal pressure pHDN = 450 bar Max. pressure pHDmax = 500 bar
B
E
F
D
A
9
B
C
Vg min Vg max
px
Vg min Vg max
pB
Vg min Vg max
I
Vg min Vg max
px
Vg min Vg max
pB
Technical Data Series D:
DMVA motor (variable displacement)
Technical DataProduct dimensions (mm)* 108 165 215 370Splined shaft profile DIN 5480 Tol. 9g W40 x 2 x 18 W45 x 2 x 21 W50 x 2 x 24 W60 x 2 x 28Centering diameter A fit h8 160 180 200 250Screw connection pitch B 141.4 158.4 176.7 352 x 120Fastening bores C 18 18 22 26Splined shaft length D 54 60 / 68 65 78SAE connection length, pressure E 309 357 - -Overall length F 337 376 447 433.5Pressure ports SAE J518 (6,000 psi) 1" 1 1/4" 1 1/4" 1 1/2"Oil leakage port ISO 9974-1 M26 x 1,5 M26 x 1,5 M33 x 2 M33 x 2
Note:A brake valve can be attached. The pressure ports can be at the rear or side on the connecting plate.
DMVAvariable displacement, open and closed circuit, nominal pressure 450 bar, maximum pressure 500 bar
Nominal size 108 165 215 370Displacement Vg max [cm3] 107.7 167.8 216.5 371.2Max. speed at Vg max and Δp = 430 bar, nmax [rpm] 3,350 3,000 2,700 2,400Max. speed at Vg / Vg max= 0.65 and Δp = 200 bar, nmax [rpm] 5,125 4,590 4,100 3,000Flow at nmax, qv max [l / min] 361 503 584 891Output power Δp = 430 bar, Pmax [kW] 259 361 419 638Output torque Δp = 430 bar, Tmax [Nm] 737 1,149 1,481 2,538Available controls EL, EL-DA, SD, SD-DA, HD
Control / regulation Other control function combinations available on request.Electrical adjustment with proportional magnet (positive or negative characteristic curve)
Hydraulic adjustment, depending on control pressure (positive or negative characteristic curve)
Pressure cut-off Hydraulic adjustment,high-pressure related
Hydraulic two-pointcontrol
* Dimensions may vary according to configuration and additional equipment (installation drawing on request).
Type code for DMVA motorsDMVA O /
Motor type
Series-D / Motor / Variable displacement DMVA
Circuit type
Open O
Closed G
Nominal size (per rotating group)
108 165 215 370
• • • •
• Available
On request- Not available
Design
1
Minimum displacement (Other values on request)
0 – 66 cm³ Values given in cm³/rpm
Mounting flange (Other mounting flanges on request)
DIN / ISO 3019-2 • • • 31...
Non-standard flange - • 51...
Direction of rotation (looking at input shaft)
Alternating • • • • W
Shaft end
Splined shaft DIN 5480 • • • • 1
Additional equipment
No attachment • • • • O
Through-drive
Without through-drive • • • 0
Non-standard through-drive • K
Valve / Sensor
Without • • 0
High pressure limiting valve • • • OH
Hydraulically adjustable high pressure relief valve OX
Flushing for closed circuit • • • SO
Flushing for open circuit • MO
Flushing for open circuit with high pressure relief valve MH
High pressure relief valve with brake valve • • • BH
Sensor technology
Without • • • • 0
With speed sensor • • • • D
With swash plate angle sensor • • • W
Control / regulation
Hydraulic adjustment, high-pressure related • • - - HD
Hydraulic adjustment depending on control pressure / pressure cut-off • SD / DA
Electrical adjustment with proportional magnet • • • • EL
Hydraulic two point control ZH
Electrical adjustment with proportional magnet / pressure cut-off • • • EL / DA
Hydraulic proportional (falling characteristic) • SD
Connections
ISO 6162-2 / SAE J518-2, high pressure ports 6,000 PSI • • • • A
Liebherr Components
From A to Z – the components division of the Liebherr Group offers a broad range of solutions in the area of mechanical, hydraulic, electric and electronic drive system and control technology. The efficient components and systems are pro-duced at a total of ten production sites around the world to the highest standards of quality. Central contact persons for all product lines are available to our customers at Liebherr-
Components AG and the regional sales and distribution branches.
Liebherr is your partner for joint success: from the product idea to development, manufacture and commissioning right through to customer service solutions like remanufacturing.
components.liebherr.com
Gas engines Diesel engines Fuel injection systems Axial piston hydraulics Hydraulic cylinders
Human-machine interfacesand gateways
Control electronics and sensor technology
Power electronics Control cabinets Software
Slewing bearings Gearboxes and winches Electric machines Remanufacturing
Liebherr-Components AGPost box 222, CH-5415 Nussbaumen / AG +41 56 296 43 00 [email protected]
Liebherr USA, CO.1465 Woodland Drive, Saline, MI 48176, USA +1 734 944 63 34 [email protected]
Prin
ted
in S
witz
erla
nd b
y A
lbre
cht D
ruck
AG
B
K
AxM
-DM
VAD
-PF-
10.1
9-0.
1-en
Sub
ject
to te
chni
cal m
odifi
catio
ns.