ve partslist 5300 v2

» PARTS LIST09/2019

STANDARD

» 5300 » 5320

DEEPSTITCH

» 5380

© VETRON | TYPICAL GmbH

Clara-Immerwahr-Str. 6 67661 Kaiserslautern, Germany

Tel.: +49 6301 320 75 - 0 Fax: +49 6301 320 75 - 11

[email protected] www.vetrontypical.com

All rights reserved.The instructions for use, service instructions, parts lists are protected by copyright. Any reuse of the content outside the copyright is without the written consent of VETRON | Typical GmbH inadmissible and punishable.

VETRON | Typical GmbH is only liable for damage caused by intent or gross negligence on the part of the manufacturer. Moreover, liability is excluded.

Reserve technical changes!The contents were carefully prepared and checked by the publisher. Due to continuous develop-ments, illustrations, functional steps and technical data may di�er slightly.

Updating the documentationIf you have suggestions for improvement or have detected any irregularities, please contact us.

The documents for the machines can be accessed by logging on https://www.vetrontypical.com/ downloaded for free.

MF 09/2019 PARTS LIST VETRON 5300 - POST BED MACHINE 03

09/2019 PARTS LIST VETRON 5300 - POST BED MACHINE

INDEX PART LISTVETRON 5300 POST BED MACHINE

04 GENERAL

05 SEWING MACHINE

OVERVIEW - 1 & 2-NEEDLE

06 SEWING MACHINE

OVERVIEW - DEEPSTITCH

07 01. HEAD MODULE

557 110 000 (1-NEEDLE)

557 120 000 (2-NEEDLE)

557 116 000 (DEEPSTITCH)

23 02. FRAME MODULE

557 003 000 (POST BED)

25 03. BASE MODULE

557 213 000 (1-NEEDLE)

557 223 000 (2-NEEDLE)


43 04. MAIN DRIVE MODULE

557 313 000

49 05. HANDWHEEL MODULE

557 410 000

51 06. LUBRICATION

55 07. ELECTRONIC PARTS SEWING

61 08. SEWING ACCESSORIES

STANDARD ACCESSORIES - INCLUDED IN DELIVERY

83 09. TABLE STAND

85 INDEX - PARTS OF SEWING MACHINE

04 09/2019 PARTS LIST VETRON 5300 - POST BED MACHINE 05


GENERAL

At the time of printing, all information and illustrations in this document were up-to-date.

Technical changes without prior notice!

NOTE!

» Please take note of, we will not be liable for spare parts and accessories, not purchased from us. These parts were neither examined by us, nor released. Consequently, the installation or use of these products can have a negative influence on features and your workflow of the machine.

» We accept no liability for any damage caused by the use of non-original parts.

» Parts which are boxed have a underlined number. These parts have a assembly part number!

» The part numbers in the box can be seperately ordered.

» Parts with a means this part is new designed. The previous version is found at the end of the chapter. After consumption they will no longer be available.



HEAD MODULE 557 110 000 // 557 120 000 SEWING, P. 07

BASE TECHNOLOGY MODULE 557 213 000 // 557 223 000 SEWING, P. 25

FRAME MODULE 557 003 000 P. 23

MAIN DRIVE MODULE 557 313 000 SEWING, P. 43

HANDWHEEL MODULE 557 410 000 P. 49

TABLE STAND P. 81

LUBRICATION P. 51

ELECTRONIC PARTS P. 55

ACCESSORIES Sewing P. 61

SEWING MACHINEOVERVIEW - 1 & 2-NEEDLE

06 09/2019 PARTS LIST VETRON 5300 - POST BED MACHINE MF


HEAD MODULE 557 116 000 SEWING, P. 07

BASE TECHNOLOGY MODULE 557 216 000 SEWING, P. 25

FRAME MODULE 557 003 000 P. 23

MAIN DRIVE MODULE 557 313 000 SEWING, P. 43

HANDWHEEL MODULE 557 410 000 P. 49

TABLE STAND P. 81

LUBRICATION P. 51

ELECTRONIC PARTS P. 55

ACCESSORIES Sewing P. 61

SEWING MACHINEOVERVIEW - DEEPSTITCH

07 09/2019

PARTS LIST VETRON 5300 - POST BED MACHINE

01. HEAD MODULE557 110 000 (1-NEEDLE)557 120 000 (2-NEEDLE)


08 OVERVIEW

09 01. COVER

10 02. CONTROL & BOBBIN WINDER

12 03. THREAD GUIDE ASSY - 1-NEEDLE / DEEPSTITCH

14 04. THREAD GUIDE ASSY

15 05. INNER PARTS – OVERVIEW

16 05.01. BEARING & COVER

17 05.02. THREAD TAKE-UP LEVER & STITCH REGULATOR

18 05.03. STITCH REGULATOR – TOP FEED - STROKE

19 05.04. NEEDLE BAR PENDULAR

20 05.05. TOP FEED MECHANISM

21 05.06. STEPPING MOTORS

22 06. PREVIOUS VERSIONS



01.05. INNER PARTS P. 15

01.03. THREAD GUIDE ASSYP. 12

01.01. COVERP. 09

01.02. CONTROL & BOBBIN WINDERP. 10

01.04. THREAD GUIDE ASSYP. 14

01. HEAD MODULEOVERVIEW

559 0126 35

559 0121 33

559 0010 09 559 0127 36

DIN 912 – M4x10 (4x)

DIN 912 – M4×12 (2x) chrome plated



01. HEAD MODULE01. COVER

559 1710 09

DIN 7984 – M4×6

559 0395 15

559 0394 13

DIN 7991 – M4×8

DIN 7991 – M4×8

559 0506 59

559 2616 10

559 0397 69

559 0396 69

559 0398 15DIN 7984 – M4×8

559 0392 15

DIN 9021 - 3,2

DIN 7049 – ST 2,2×6,5

ISO 1580 - M2,5x6

559 0507 59

559 0618 59 (P. 59)

559 2769 09

559 0499 10

559 0841 09 (with magnet)

559 0663 59

559 0649 59



01. HEAD MODULE02. CONTROL & BOBBIN WINDER-1-2

559 1700 09

ISO 1580 - M2,5×8

DIN 912 – M4×10

DIN 84 M2x5

559 0958 10

559 3218 13

559 0274 10

ISO 1207 - M3×4

559 1061 11

DIN 7984 M4×8

DIN 912 M3×6

ISO 1580 M2x6 (3x)

DIN 125 - A 2.2 (3x)



01. HEAD MODULE02.01. CONTROL & BOBBIN WINDER

–2-2

559 0130 09

559 0375 09

559 0429 13

ISO 1207 – M3×6

559 0132 13

559 0119 13

559 0133 13

559 0493 13

ISO 4032 – M3

ISO 1207 – M3×6DIN 912 – M5×12

DIN 7984 – M5×10

559 0430 36

DIN 7991 – M4×8

DIN 912 – M4×20

DIN 913–M3×5

DIN 913–M3×5

DIN 913–M3×5

DIN 913 – M4×3

559 0006 11

DIN 913 – M3×4

C144588201 ( (C) - Standard ( C144588301 (B) )

559 0296 16

559 1798 13 (26mm) 559 0983 13 (32mm)

559 0704 59

DIN 912 – M3×6

559 0237 30

559 9044 34

559 0501 59

559 0580 59

559 9139 09 See 07.05.



01. HEAD MODULE 03. THREAD GUIDE ASSY - 1-NEEDLE / DEEPSTITCH-1-2

ISO 1207 M2x3

559 0716 59

DIN 912 M3x6 (2x)

DIN 912 M3x12 (2x) 559 0704 59

559 1723 09

DIN 913 M4x3

559 0006 11

559 1855 10

559 1856 10

DIN 915 M3x6

559 1719 09 DIN 7984 M5x10

DIN 7984 – M4x8

559 2622 10

ISO 4032 M3

DIN 913 M3x5

DIN 7991 M3x8

559 0429 13

ISO 1207 M3x6

559 2632 12

ISO 1207 M3x6

559 1798 13 (26mm) 559 0983 13 (32mm)

ISO 4032 M3

DIN 913 M3x5

559 0493 13

559 0133 13559 0119 13559 0132 13

559 1742 03

559 0237 30

DIN 912 M4x20

DIN 7991 M4x8

559 1709 00

DIN 7984 M3x8 (2x)

559 0294 09

559 0294 09

ISO 1207 M2x3

559 0471 16

559 9141 09 See 07.05.559 9044 34

559 0501 59

559 0580 59



01. HEAD MODULE03.01. THREAD GUIDE ASSY

-2-2

559 0393 13

Collar 4 DIN 705

Collar 4 DIN 705

130.13.600

DIN 913 - M2,5x3

Lockwasher DIN 6799 – 3,2

Lockwasher DIN 6799 – 3.2

Lockwasher DIN 6799 – 3,2

Hexagon Thin Nut ISO 4035 – M4

DIN 7991 – M4×8

130.13.600

559 0393 13

559 0393 13

559 0926 09

DIN 913 - M2,5x3



01. HEAD MODULE04. THREAD GUIDE ASSY



01.05.04. NEEDLE BAR PENDULAR P. 19

01.05.06. STEPPING MOTORS P. 21

01.05.01. BEARING & COVER P. 16

01.05.03. STITCH REGULATOR – TOP FEED - STROKEP. 18

01.05.02. THREAD TAKE-UP LEVER & STITCH REGULATOR P. 17

01.05.05. TOP FEED MECHANISM P. 20

01. HEAD MODULE05. INNER PARTS – OVERVIEW

DIN 912 – M4×8

559 0820 10

559 0560 59

ISO 1207 – M3×5559 7018 09

DIN 912 – M5×16

DIN 912 – M4×6

559 0968 11

559 0984 11

DIN 912 – M5×20 559 0953 11

559 0964 01

DIN 7991 – M4×10

559 0528 59

DIN 988 3×6×1ISO 1207 – M3×5

Standard559 0956 15Edge guide-558 710 000559 1708 165

DIN 7991 – M4×10

559 0644 59

DIN 912 – M5×16

DIN 912 - M4x6

DIN 912 - M4x6

New designed. See 01.06. for previous version16 09/2019 PARTS LIST VETRON 5300 - POST BED MACHINE 17


01. HEAD MODULE05.01. BEARING & COVER

DIN 6799 – 7

559 0104 09 (26mm)

559 1886 09 (26mm)

DIN 912 – M5×10

559 0103 10

559 0098 10

559 0163 09 See 01.05.03.

559 0169 10

DIN 916 – M6×0,75×6

DIN 916 – M6×8

559 0393 13

93WF2-001

DIN 913 – M5×8

559 0072 10



01. HEAD MODULE05.02. THREAD TAKE-UP LEVER & STITCH REGULATOR

DIN 913 – M5×5

DIN 913 – M6×0,75×8

DIN 913 – M6×0,75×8

DIN 913 – M6×0,75×8

DIN 913 – M6×0,75×6

DIN 916 – M6×0,75×8

DIN 913 – M6×0,75×6

DIN 912 – M5×16

559 0163 09



01. HEAD MODULE05.03. STITCH REGULATOR – TOP FEED - STROKE

2-NEEDLE1-NEEDLE

DIN 912 - M4x6

559 0896 14

559 0081 10

DIN 912 - M4x5

DIN 912 - M3x6

559 0847 11

559 0963 14

559 0080 10

500 011 404

DIN 913 M3x2,5

S105201003

559 3002 13

179WF5-001

DIN 912 M3x8

DIN 988 - 6x12x1

DIN 912 - M6x20

559 0075 09

Standard559 3001 09Deepstitch559 1243 09

Deepstitch559 1263 13

DIN 913 - M6x6 (x2)

559 0060 10 (x2)



01. HEAD MODULE05.04. NEEDLE BAR PENDULAR

559 0102 10

DIN 916 – M5×6

559 0085 10

559 0095 10559 0092 10

DIN 913 – M5×6

DIN 6799 – 3.2

559 0087 10

559 0093 10 Standard D-222 E Low pressure spring

DIN 988 – 11×17×1

DIN 912 – M6×16

Circlip DIN 471 – 6×0,7




559 0812 10

559 7016 09

559 2695 09

559 0480 00

559 0239 09

S150232005

New designed. See 01.06. for previous version20 09/2019 PARTS LIST VETRON 5300 - POST BED MACHINE 21


01. HEAD MODULE05.05. TOP FEED MECHANISM

DIN 912 – M4×10 (4x)

559 0714 59 Top feed stroke motor

ISO 4017 - M5×10

DIN 912 – M5×10

559 0418 10

559 0099 10

DIN 913 – M6×0,75×8

559 0117 10

DIN 912 – M4×10 (3x)

559 0710 59 Presser foot stepper motor

DIN 913 – M5×6

559 0091 10

DIN 6799 – 5 DIN 988 – 6×12×1

559 0096 10

DIN 913 – M5×5 (2x)

559 0422 00



01. HEAD MODULE05.06. STEPPING MOTORS

559 0835 09

559 0299 09

559 0514 59



01. HEAD MODULE06. PREVIOUS VERSIONS

NOTE! These parts have been replaced by new designed parts. After consumption they will no longer be available.

PREVIOUS VERSION IS REPLACED BY

559 7018 09 Foot distance sensor assy

559 7016 09 Holder assy



24 01. FRAME MODULE

02. FRAME MODULE557 003 000 (POST BED)



02. FRAME MODULE

559 0230 35

559 0844 09

DIN 912 – M4×12

559 0009 09

559 0227 33 (Standard)559 3166 10 (Edge guide)

DIN 7984 - M4×8 (2x)

559 0921 13

230 1000 08

DIN 912 – M4×8

559 0804 10

DIN 912 – M4×8

DIN 7984 - M5x10 (3x)

559 0220 35

559 0842 35

DIN 912 – M4×12 (4x)

559 0229 33

559 0899 11

559 0899 11

559 0863 14

559 1120 14

559 0231 35

25 09/2019

PARTS LIST VETRON 5300 - POST BED MACHINE

03. BASE MODULE557 213 000 (1-NEEDLE)557 223 000 (2-NEEDLE)


26 TECHNOLOGY MODULE – OVERVIEW -1-NEEDLE / DEEPSTITCH

27 TECHNOLOGY MODULE – OVERVIEW - 2-NEEDLE

28 01.02. COVER - 1-NEEDLE / DEEPSTITCH

29 01.01. COVER - 2-NEEDLE

30 02. MOUNTING BRACKET HOUSING

31 03. FEED DOG CARRIER & FEED SHAFT MECHANISM

32 04. HOOK OVERVIEW - 1-NEEDLE / DEEPSTITCH

33 04.01. HOOK OVERVIEW - 2-NEEDLE

35 04.03. HOOK CARRIER & COVER

36 04.04. MECHANICAL OPENER

37 04.05. THREAD CUTTER

38 04.06. HOOK DRIVE SHAFT - 1 NEEDLE / DEEPSTITCH

39 04.07. HOOK DRIVE SHAFT / 2 NEEDLE

40 05. CENTER POST & COVER - 1 NEEDLE / DEEPSTITCH

41 05. CENTER POST / 2 NEEDLE



03.01. COVERP. 28

03.03. FEED SHAFT MECHANISM P. 31

03.02. MOUNTING BRACKET HOUSING

P. 30

06.01. LUBRICATION SYSTEMP. 51

03.02. FEED DOG CARRIER P. 31

03.04. POST BED - HOOK OVERVIEW

P. 32

03.05. CENTER POST & COVER

P. 40

03. BASE MODULETECHNOLOGY MODULE – OVERVIEW -1-NEEDLE / DEEPSTITCH



03.01. COVERP. 29

03.03. FEED SHAFT MECHANISM P. 31

03.02. MOUNTING BRACKET HOUSING

P. 30

03.03. FEED DOG CARRIER P. 31

03.04. POST BED - HOOK OVERVIEW P. 33

06.01. LUBRICATION SYSTEMP. 51

03. BASE MODULETECHNOLOGY MODULE – OVERVIEW - 2-NEEDLE

DIN 912 – M5×12 (2x)

559 1096 35

559 0407 16

DIN 912 – M5×12 (2x)

DIN 913 – M4×4

559 0424 16



03. BASE MODULE01.02. COVER - 1-NEEDLE / DEEPSTITCH

DIN 912 – M5×12 (2x)

559 1062 35

559 0407 16

DIN 912 – M5×12 (2x)

DIN 913 – M4×4

559 0424 16



03. BASE MODULE01.01. COVER - 2-NEEDLE

DIN 912 – M6×20

559 0252 10

559 0252 10

DIN 912 – M6×25

DIN 912 – M6×16



03. BASE MODULE02. MOUNTING BRACKET HOUSING

DIN 125 A6,4

ISO 4032 M6

DIN 912 - M6x12

Washer DIN 9021-4,3

ISO 4017 - M4x8

559 0047 10

559 0043 09

559 1004 09

DIN 912 – M6×16

DIN 912 – M4×25 (2x)

559 0038 10

559 0032 10

DIN 913 – M5×6

559 0029 10

DIN 912 – M5×16 (2x)

DIN 6799-6 (2x)Collar 15 DIN 705

DIN 913 – M6×6

559 0026 10

Collar 15 DIN 705

DIN 913 – M6×6

559 0035 10 (2x)



03. BASE MODULE03. FEED DOG CARRIER & FEED SHAFT MECHANISM



03.04.01. HOOK P. 34

03.04.04. MECHANICAL OPENER P. 36

03.04.02. HOOK CARRIER & COVER

P. 35

03.04.05. HOOK DRIVE SHAFT P. 38

03.04.03. THREAD CUTTER P. 37

POST BED - RIGHT -COMPLETESTANDARD 559 1001 09DEEPSTITCH 559 1250 09

03. BASE MODULE04. HOOK OVERVIEW - 1-NEEDLE / DEEPSTITCH



03.05. CENTER POSTP. 41

03.04.05. HOOK DRIVE SHAFT P. 39

POST BED - LEFT -COMPLETE559 1060 09

POST BED - RIGHT -COMPLETE559 1154 09

03. BASE MODULE04.01. HOOK OVERVIEW - 2-NEEDLE

559 3226 10

559 2679 10

559 3233 10

559 3234 10

559 3235 11

559 3245 10

559 3238 10

DIN912 M3x6

559 3110 09

DIN913 M6x8

559 3242 10

DIN912 M3x6

DIN913 M6x8

559 3229 09

559 0960 09

559 3240 10

559 3237 10



03. BASE MODULE04.02. HOOK

559 1052 09 559 1135 09

O-Ring 13x1,7

B029006230

BX85729009

ISO 7380 M4x10 (2x)

559 0337 35

DIN 913 - M4x5

DIN 913 M5x8

ISO 4032 M5

DIN 913 - M5x25

559 1111 11

DIN 912 M3x6 (4x)

559 1103 11

DIN 912 M3x6 (4x)

DIN 7984 M4x8 (2x)

559 0324 14

559 0301 10

ISO 1207 - M3x4

559 1101 10

DIN 913 - M4x5

559 1063 10

Z-051NI

DIN 913 - M5x6 (2x)

DIN 433 5,3x9x1 (4x)

DIN 912 M5x16 (4x)



03. BASE MODULE04.03. HOOK CARRIER & COVER

559 1019 10

k10x13x10

559 1126 10

DIN 988 - 10x16x0,2

559 1057 10

ISO 8374 M3x16

DIN 988 - 10x16x0,2

559 1013 10

DIN 705 x 8mm

DIN 913 - M6x6 (2x)

DIN 913 - M4x5

DIN 913 - M4x5

DIN 912 - M3x8

559 1056 09

559 1063 10559 1106 10

559 1059 10

DIN 7984 M3x8 559 1016 10


559 1012 10

DIN 913 - M4x5 (2x)

559 1107 09

559 1011 10

DIN 913 - M4x4 (2x)




03. BASE MODULE04.04. MECHANICAL OPENER

ISO 2009 M3x5

ISO 2009 M3x8

559 1131 10

559 1116 10

559 1115 00

DIN 705 - 8mm

DIN 705 - 8mm

DIN 427 - M4x12

559 1086 09

ISO 7380 M4x10

559 1032 10

ISO 4017 M4x8

559 1031 10

988 - 8x14x0,5

DIN 913 - M5x5 (2x)

DIN 913 - M4x5

DIN 913 - M4x10 (2x)

559 0441 09

559 1108 10

DIN 913 - M4x5


559 0667 59(Adapter cable for 2-Needle)



03. BASE MODULE04.05. THREAD CUTTER

DIN 913 - M6x0,75x8 (2x)

DIN 913 - M6x0,75x6 (2x)

559 0351 10

DIN 913 - M5x5 (2x)

559 1069 10

559 1051 10

DIN 913 - M6x0,75x8 (2x)

DIN 913 - M6x0,75x8 (2x)



03. BASE MODULE04.06. HOOK DRIVE SHAFT - 1 NEEDLE / DEEPSTITCH

DIN 913 - M6x0,75x6 (2x)

DIN 913 - M6x0,75x6 (2x)

DIN 913 - M6x0,75x8 (2x)

DIN 705 - 17mm

559 1172 10

559 2617 14

DIN 913 - M6x6



03. BASE MODULE04.07. HOOK DRIVE SHAFT / 2 NEEDLE

DIN 433 5,3x9x0,1 (2x) (x0,2 - x0,5 - x1 if needed)

DIN 771 - M4x10 (3x)

DIN 913 - M5x5

559 1043 10

DIN 913 - M5x5

559 1039 10

DIN 7984 - M5x10 (2x)

DIN 427 - M5x12 (2x)

559 1038 10


Standard559 1094 16 Deepstitch559 1249 16

Standard559 1081 11Deepstitch559 1245 11Standard

559 1092 09Deepstitch559 1240 09





03. BASE MODULE05. CENTER POST & COVER - 1 NEEDLE / DEEPSTITCH

DIN 433 5,3x9x0,1 (2x) (x0,2 - x0,5 - x1 if needed)

DIN 913 - M5x5

559 1067 09

559 1043 10

DIN 913 - M5x5

559 1039 10

DIN 7984 - M5x10 (2x)

DIN 427 - M5x12 (4x)

559 1068 10

559 1099 00

559 1092 09

559 1038 10

559 1040 00



03. BASE MODULE05. CENTER POST / 2 NEEDLE



03. BASE MODULE



04. MAIN DRIVE MODULE557 313 000

44 MAIN DRIVE MODULE – OVERVIEW

45 01. MAIN MOTOR

46 02. STITCH LENGTH REGULATOR

47 03. CRANK ASSY



01.01. MAIN MOTOR P. 45

01.02. STITCHLENGTH REGULATOR

P. 46

01.03. CRANK ASSY P. 47

04. MAIN DRIVE MODULEMAIN DRIVE MODULE – OVERVIEW

559 0655 59

559 1760 59

559 0188 10

559 0061 10

DIN 913 – M6×0,75×8

559 1747 35

DIN 916 - M6×0,75×8

DIN 916 - M6×0,75×8

DIN 916 - M6×0,75×6

DIN 913 – M6×0,75×8

559 1711 35

DIN 988 - 12×18×1

DIN 471 - 12×1

559 0192 10

DIN 913 - M6×6

DIN 913 - M6×6DIN 913 – M6×0,75×6

559 0352 14

559 0166 10

559 0252 10

DIN 912 - M6×20

559 0479 10

559 0160 09

DIN7991 M4×8

DIN 912 M5x20 (4x)

BX85720609

B966234009

B966235009

559 1713 35

DIN 912 - M6×20



04. MAIN DRIVE MODULE01. MAIN MOTOR

DIN 916 – M5×6

559 0713 59

DIN 912 – M4×10

DIN 912 - M6x12

559 0199 10

DIN 913 – M6×6

559 0196 10

559 0198 10

559 0145 09 For screws see P. 18

DIN 988 – 12×18×1

DIN 471 – 12×1

559 0197 10

DIN 913 – M5×6

DIN 916 – M5×6

559 1071 09

DIN 705 d15

559 0014 10

DIN 913 – M5×6

559 0420 00



04. MAIN DRIVE MODULE02. STITCH LENGTH REGULATOR

ISO 4017 M6×20

DIN 126 - 6,6

559 0173 00

559 1071 09

559 1003 09

559 0496 10

559 0181 10

DIN 916 M6x0,75x6

DIN 988 – 8×14×1

DIN 471 – 8×0,8

DIN 988 – 8×14×1

DIN 471 – 8×0,8



04. MAIN DRIVE MODULE03. CRANK ASSY


09/2019 PARTS LIST VETRON 5300 - POST BED MACHINE48

04. MAIN DRIVE MODULE



50 01. HANDWHEEL MODULE

05. HANDWHEEL MODULE557 410 000



05. HANDWHEEL MODULE

559 0062 15DIN 913 – M6×0,75×8

559 0469 11

559 0486 00

559 0957 14

Roller bearing K18x22x13

DIN 913 – M6×8 (4x)

DIN 988 – 18×25×1.5

DIN 912 – M6×20 (4x)

DIN 916 – M6×0,75×8

559 0061 10

DIN 916 – M5×6



06. LUBRICATION

52 01. HEAD

53 02. HOOK

54 03. OIL TANK

Standard / Deepstitch Oil tube 3x5x580mm Oil wick Ø 2mm. 650mm length

Oil tube 3x5x75mm Oil wick Ø 2mm, 260mm length

Oil tube 3x5x755mm Oil wick Ø 2mm, 800mm lengthOil wick

559 0899 11 (x2)

559 0863 14



NOTE! Oil tubes and oil wick can only be ordered by the meter!

Oil tube 3x5 : 559 3107 34 Oil tube 6x8 : 559 3108 34 Oil wick : Ø 2mm 559 3109 34

06. LUBRICATION01. HEAD

Oil tube 3x5x850mm

Oil tube 3x5x250mm

Tube clamp217 000 38 (2x)

Tube clamp217 000 38 (2x)

Oil tube 6x8x350mm

Oil tube 3x5x250mm Oil tube 3x5x250mm

Oil tube 3x5x250mm

Oil tube 3x5x200mm

Oil tube 3x5x650mm

Oil tube 6x8x180mm

Oil tube 6x8x265mm

Oil tube 6x8x300mm

Oil tube 6x8x250mm

559 2621 34

559 3014 34

559 3015 34

559 3016 34

Deepstitch & 1-Needle

2-Needle



NOTE! Oil tubes and oil wick can only be ordered by the meter!

Oil tube 3x5 : 559 3107 34 Oil tube 6x8 : 559 3108 34 Oil wick : Ø 2mm 559 3109 34

06. LUBRICATION02. HOOK

559 0054 35

559 0437 09

BX85728009

BX85728009

S151204281

500 034 322

MB3A -N66-NA-C1

DIN 912 – M4×20

H1P-N66-NA-M1

BXF7055909

DIN 912 – M4×20

BXF7060009



06. LUBRICATION03. OIL TANK



07. ELECTRONIC PARTS SEWING

56 01. PANEL

57 02. CONTROL BOX & SETPOINT DEVICE

58 03. BACK COVER CONTROL BOX

59 04. CABLING HEAD PCB

60 05. CABLING

500 035 501 500 035 502 559 0551 59 559 0552 59 559 0553 59

500 035 506 559 0554 59 559 0568 59 559 0556 59 500 035 510

500 035 330

559 0922 11

559 0641 59



07. ELECTRONIC PARTS SEWING01. PANEL

559 0612 59

DIN 912 – M6×16

Washer DIN 125 – A6,4

Washer ART 55 M6

DIN 7049 – ST 3.5×13-C-H-N

559 2153 16

559 2155 09

559 2161 09

559 0654 59

559 0629 59

DIN 7983 – ST4,2×32

559 2162 06

(P. 58, Pos. )



PEDAL CONNECTION

(P. 58)

07. ELECTRONIC PARTS SEWING02. CONTROL BOX & SETPOINT DEVICE



PE - PE Cable 559 0612 59 (P. 57)

S1 - Stroke Stepper 559 0714 59 (P. 21)

POWER - 8340 Power Cable 559 0654 59 (P. 57)

M1 - Main Drive 559 1760 59 (P. 45)

Pedal 559 2155 59 (P. 57)

X1 - Head Cable Hamess 559 0646 59 (P. 60)

X2 - Short Thread Cutter 559 0698 59 (P. 37)

M2 - Main Drive Encoder 559 0655 59 (P. 45)

Y2 - Edge Guide Adapter 559 0722 59 (Optional)

B3 - Barcode Scanner 559 1893 59 (Optional)

Y1 - Reserve

B4 - Reserve

X3 - Reserve

S2 - Stitch Length Stepper 559 0713 59 (P. 46)

S5 - Tension A Stepper 559 0637 59 (P. 60)

S6 - Edge Guide Stepper 559 0722 59 (Optional)

B2 -Slide Sensor 559 0668 59 (Optional)

B1 - Head Base Cable 559 0633 59 (P. 59)

S4 - Presser Foot Stepper 559 0710 59 (P. 21)

S3 - Tension B Stepper 559 0665 59 (Optional)

07. ELECTRONIC PARTS SEWING03. BACK COVER CONTROL BOX

HEAD BASE CABLE

(P. 58, Pos.)

559 0514 59

(P. 16)

559 0506 59 (P. 10)

CONTROL PANEL CABLE 559 1710 09 (P. 10)

559 0507 59

559 0644 59

559 0633 59

559 0618 59

559 0613 59



07. ELECTRONIC PARTS SEWING04. CABLING HEAD PCB

559 0637 59

559 0657 59

559 0646 59

559 0638 59

559 9139 09 (1-Needle) (P. 12)559 9141 09 (2-Needle) (P.13)

LED 559 0501 59 (mounting only with heat transfer pad - 559 9044 34)LED PCB with heat transfer pad 559 0580 59



EDGE GUIDE (P. 72)

KNEE SWITCH (P. 67 )

BOBBIN & CONTROL WINDER (P. 10)

CUTTER MAGNET (P. 37)

THREAD TENSION (P. 12)

EDGE GUIDE (P. 72)

07. ELECTRONIC PARTS SEWING05. CABLING



08. SEWING ACCESSORIESSTANDARD ACCESSORIES - INCLUDED IN DELIVERY

62 01. ACCESSORIES

63 02. HEAD - FRAME – ACCESSORIES

64 03. THREAD STAND

66 04. ADDITIONAL EQUIPMENT

70 04.04. SAFETY SWITCH KIT - 559 1155 09

71 04.05. EYE GUARD - 558 740 000

72 04.06. ELECTRIC EDGE GUIDE - 558 710 000

73 04.07. HEIGHT ADJUSTABLE ELECTRIC EDGE GUIDE - 558 711 000

74 04.08. COVER CONTROL KIT - 559 1151 09 / 559 1152 09

75 05. SERVICE KIT / ADJUSTMENT GAUGE

76 06. STICKERS

77 07. NEEDLE GAUGE PARTS / 1-NEEDLE

78 08. NEEDLE GAUGE PARTS / DEEPSTITCH

79 09. NEEDLE GAUGE PARTS / 2-NEEDLE

81 09.02. NEEDLE GAUGE PARTS / 2-NEEDLE / MIDDLE SEAM GUIDE AND 2-PART LEVELING FOOT



08. SEWING ACCESSORIES01. ACCESSORIES

SuS 6346

559 0628 59 (USB Flash Drive – Operator) OPTIONAL

559 0626 59 (USB Flash Drive – Admin)

W060401017 (Screw Driver L)

W060401023 (Screw Driver S)

134-135 Needle Size 120

W060302001

559 3106 11

559 2679 10 (ø26 mm)

S151004005 (Hexagonal wrench s=5)



S151004012 (Hexagonal wrench s=2,5)

558 8000 04 (Hexagonal wrench s=1,3 black)

559 0856 30

S151004009

DIN 912 M5x6

559 0922 11



08. SEWING ACCESSORIES02. HEAD - FRAME – ACCESSORIES

559 0244 35

559 0354 13 (2x)

DIN 7991 - M6x14 (4x)

559 0218 35 (2x)

DIN 7982 – ST4.2x19 (6x)

Slanted Base 559 1105 09Gas Spring559 0458 39

559 0435 15

DIN 968 - ST3,5x13 (29x)

559 0233 35

DIN 912 - M6x12 (2x)

559 0433 12

559 2777 11

559 0432 12

WN56 – 6×30 (2x)



559 3642 09Thread Stand / Mounting-Kit-Vetron

08. SEWING ACCESSORIES03. THREAD STAND-1-

559 3658 09Thread Stand / 1-Needle Deepstitch

1F-014 Thread Stand / 3-Spools

006F00030 Thread Stand / 2-Spools

559 3659 09Thread Stand / 2-Needle

NOTE! To order individual parts, see next page.



08. SEWING ACCESSORIES03. THREAD STAND

-2-2

559 3619 09For 1 & 2 Needle, Deepstitch and Mounting-Kit Vetron

DIN 934 M20x1,5 (nickel-plated)

DIN 912 M8x25 (nickel-plated)



DIN 125-A21 (nickel-plated)

DIN 934 M20x1,5 (nickel-plated)

DIN 439 M5 (nickel-plated)


DIN 439 M5 (nickel-plated)


559 3649 09 - 400mm559 3647 09 - 600mm559 3648 09 - 800mmFor 1 & 2 Needle, Deepstitch and Mounting-Kit Vetron

559 3650 09 For Mounting-Kit Vetron

559 3646 09 - 600mm For 1 & 2 Needle, and Deepstitch

559 3637 09 For 1 & 2 Needle, and Deepstitch



DESCRIPTION

THREAD GUIDE WITH TUBE

SPINDLE SHAFT CLAMP (THREAD STAND)

COVER FOR THREAD STAND COPS

08. SEWING ACCESSORIES04. ADDITIONAL EQUIPMENT

559 3629 03

559 3638 30 (400mm) 559 3633 30 (1000mm)

559 3653 10

559 3652 15

559 3644 09



DESCRIPTION

KNEE SWITCH WITH CABLE

TABLE ASSY. FOR DEEPSTITCH POST BED MACHINE

08. SEWING ACCESSORIES04.01. ADDITIONAL EQUIPMENT

559 0699 59

559 1265 09

Knurled screw GN 529-15-M5x16 (x3)




DESCRIPTION

ADAPTER FOR ADDITIONAL EQUIPMENT

ROLLER & STRAIGHT GUIDE WITH FINE ADJUSTMENT

Combined hinged roller & straight guide, can be raised. Distance adjustment:

1–30 mm

STRAIGHT GUIDE WITH QUICK ADJUSTMENT OF TWO DISTANCES

Straight edge guide right, swing up. Two stitch width pre-adjusted, with quick change. Distance adjustment:

1–30 mm

DIN 912 M4x20

559 0999 10

DIN 7984 M4x8

558 701 000

KG-BZ (24mm)

KG-BZ (24mm)

KG-AB (30mm)KG-AA (43mm)

KG-AB (30mm)KG-AA (43mm)

KG-S11 Ø 11mmKG-B14 Ø 14mmKG-S04 Ø 4mm

KG-S11 Ø 11mm (Included)KG-B14 Ø 14mmKG-S04 Ø 4mm

558 702 000

Optional:

Optional:




DESCRIPTION

BARCODE SCANNER

NEEDLE COOLING

Needle Cooling Set 559 2670 09:

» Valve assy 559 0763 59

» Maintenance unit 17860121

» Tube 3x5 559 3107 34

» Tube PUN-6x4-SW 14012625

» Interconnect reduced 100 100 25

» Receptacle QSM-6-4 03070109

» Throttle check valve L-DRV-B6-KU 21110102

» Screw DIN 7981-4,2x32 (2x)

For Rack Mounting: » Screw

DIN 912 M3x20 (2x)

» Holder 559 2712 10

» Pipe 559 2713 10

» Screw DIN 7984 M3x6 (zinc plated)

559 1893 09

559 2670 09



08. SEWING ACCESSORIES04.04. SAFETY SWITCH KIT - 559 1155 09

559 1155 09

DIN 7984 M6x16

559 1153 11

DIN 934 M6

DIN 912 M5x12 (2x)

DIN 125 5,3 (2x)

DIN 125 6,4

DIN 912 M5x8

H1P-N66-NA-M1

559 0668 59

559 0729 59 NOTE! Adapter cable is needed when Slide Control is mounted



EYE GUARD 558 740 000 (44mm) 558 740 000 (31mm) 558 740 000 (26mm)

(The number in the brackets refers to the eye protection glas)

08. SEWING ACCESSORIES04.05. EYE GUARD - 558 740 000

DIN 84 - M2x10

559 3117 10 X=26mm, Edge guide distance 5mm 559 3121 10 X=31mm, Edge guide distance 8mm

558 740 000

559 0723 59

DIN 912 - M4x12

DIN 912 - M4x30

559 9030 10

559 2601 09

DIN 913 - M3x12

DIN 6325 4M6x70

559 2609 09

559 2606 21

559 2600 10 X=44mm

DIN 125 - A 4,3

DIN 912 - M4x8

X

X



08. SEWING ACCESSORIES04.06. ELECTRIC EDGE GUIDE - 558 710 000

558 710 000

DIN 912 M5x16 (4x)

559 1768 10

DIN 125 - A2.7 (4x)

DIN 912 M2,5x12 (4x)

559 0721 59

ISO 1207 M2x10

ISO 1207 M2x12

559 3006 15

559 0715 59

DIN 912 M4x16 (2x)

559 1766 16

559 2879 11

DIN 913 M4x8

DIN 912 M4×5

559 0720 59

559 0722 59

559 1708 15

DIN 7991 M4x10

DIN 912 M4×12

559 2878 11

DIN 912 M4×6

559 1799 10 559 1776 39 Standard 559 1787 01Deepstitch559 1274 03

KG-AB

559 1770 11

559 2793 36

DIN 912 M3x12 (3x)

559 1767 31

559 2630 11

DIN 913 M4x5

559 1777 31 (2x)559 1769 10

559 1899 11ISO 4032 M5

559 1772 16

DIN 5401 (Ball 5 mm)

D-117 A (spring)

559 1773 39

559 1775 09 (4x)

DIN 7984 M6x16 (4x)

559 1763 10

DIN 912-M5x12 (3x)

559 1774 09



08. SEWING ACCESSORIES04.07. HEIGHT ADJUSTABLE ELECTRIC EDGE GUIDE - 558 711 000

558 711 000

559 1773 39

H1P-N66-NA-M1DIN 125 A4,3

DIN 912 M4x8

DIN 912 M5x16 (4x)

DIN 84 M2,5x12 (3x)

559 1768 10DIN 125 - A2.7 (4x)

DIN 912 M2,5x12 (4x)

DIN 913 M6x0,75x6

DIN 84 M3x6

559 0721 59

DIN 84 M2x10

DIN 84 M3x8

DIN ART 55 - M4

DIN 84 M2x8 (2x)

DIN 84 M2,5x4 (2x)

DIN 84 M2x12

559 3006 15

559 3166 33

559 0715 59

DIN 912 M4x16 (2x)

559 3665 16

559 1806 13 (2x)DIN 988 4x8x1 (2x)

DIN 912 M4x22 (2x)

559 2879 11

DIN 913 M4×5DIN 913 M4×8

559 1775 09 (4x)

DIN 7984 M6x16 (4x)559 1763 10

DIN 912-M5x12 (3x)

559 1774 09DIN 912 M4x12

DIN 912 M4x12 (4x)

559 2878 11DIN 912 M4x6

559 1799 10DIN 913 M5x30

KG-AB

DIN 934 M5

559 1770 11

559 2793 36

DIN 912 M3x12 (3x)

559 1767 31

DIN 913 M4x5

559 1805 13559 1804 13DIN 988 7x13x0,3559 3161 09

DIN 9021 - 4,3DIN 912 M4x10

559 1803 13DIN 988 5x10x0,5

DIN 471 5x0,6

DIN 7991 M4x10 (2x)

DIN 912 M4x10 (2x)

DIN 125 A4,3 (2x)

559 1769 10

559 3664 11

559 3663 10

559 3660 11

559 3666 16

DIN 125 A2,8 (2x)

559 1899 11559 3661 11

559 1708 15

DIN 913 M3x8

559 0777 59

559 0776 59

559 3662 10

559 1772 16

559 6200 59

559 0722 59

559 0682 59

559 0720 59

559 1865 13559 1867 10

DIN 5401 (Ball 5mm)

D-117 A (spring)



1-NEEDLE / DEEPSTITCH

2-NEEDLE

08. SEWING ACCESSORIES04.08. COVER CONTROL KIT - 559 1151 09 / 559 1152 091 / 2-NEEDLE

559 1145 10

559 1144 03

559 1144 03

559 0666 59

559 1151 09

559 1152 09

559 1143 03

559 0666 59 (2x)

559 1145 10 (2x)

559 0668 59

559 0668 59

ISO 7380 M4x10 (2x)

ISO 7380 M4x10 (4x)

DIN 7984 M3x10 (2x)

DIN 7984 M3x10 (4x)

559 0729 59 NOTE! Adapter cable is needed when Safety switch kit is mounted

559 0729 59 NOTE! ( x2 needed when Safety switch kit is mounted )



08. SEWING ACCESSORIES05. SERVICE KIT / ADJUSTMENT GAUGE

DESCRIPTION

SERVICE KIT

ADJUSTMENT GAUGE

ADJUSTMENT GAUGE

ADJUSTMENT GAUGE

PARALLEL PIN

CLAMP

559 2205 09

557 110 112

557 110 119

557 120 002

DIN 6325 2M6x40

557 110 120



08. SEWING ACCESSORIES06. STICKERS

1

2

OFF ON

Threading Scheme Sticker559 3192 39

Safety StickerQT0000044

Health Hazard Sticker559 3193 39

Environment Sticker559 3194 39

Grounding Sticker559 3195 39



POS-NR. MODEL STITCH LENGTH (mm) ORDER #

SEWING EQUIPMENT FOR STANDARD SEWING OPERATIONSSET:

– 558 302 009

559 4300 13

559 4201 09

559 4030 13

559 4130 13

FASTENING PARTS FOR SEWING EQUIPMENTS

POS-Nr. PART NAME

DIN 912 - M4x6 nickel plated



Din 912 - M4x8 nickel plated

08. SEWING ACCESSORIES07. NEEDLE GAUGE PARTS / 1-NEEDLE




SEWING EQUIPMENT FOR STITCHING ON EDGES ON THE RIGHT OF THE NEEDLESET:

– 558 312 006

559 4320 13

559 4624 13

559 4033 13

559 4134 13


SEWING EQUIPMENT FOR DEEPSTICH MACHINESET:

– 558 311 009

559 4315 13

559 4623 13

559 4030 13

559 4130 13

08. SEWING ACCESSORIES08. NEEDLE GAUGE PARTS / DEEPSTITCH



FASTENING PARTS FOR SEWING EQUIPMENTPOS-NR. PART NAME AMOUNT

DIN 913 M3x3 2

DIN 912 M4x6 (nickel plated) 1

DIN 912 - M4x10 (nickel-plated) 1

559 1113 13 2

DIN 7991 - M4x10 (nickel-plated) 4

DIN 933 - M4x8 1

FASTENING PARTS FOR SEWING EQUIPMENT

08. SEWING ACCESSORIES09. NEEDLE GAUGE PARTS / 2-NEEDLE



NEEDLE DISTANCE

SET: -

NEEDLE HOLDER

INNER FOOT

OUTER FOOT NEEDLE PLATE FEED DOG PLATE

6mm 558 321 009/6 559 1203 09 559 4700 13 559 4600 09 559 4420 13 559 4512 13 559 1177 13

8mm 558 321 009/8 559 1204 09 559 4701 13 559 4601 09 559 4421 13 559 4513 13 559 1178 13

10mm 558 321 009/10 559 1205 09 559 4702 13 559 4602 09 559 4422 13 559 4514 13 559 1179 13

12mm 558 321 009/12 559 1206 09 559 4703 13 559 4603 09 559 4423 13 559 4515 13 559 1180 13

SEWING EQUIPMENT FOR STANDARD SEWING OPERATIONS

08. SEWING ACCESSORIES09.01. NEEDLE GAUGE PARTS / 2-NEEDLE



SEWING EQUIPMENT FOR STANDARD SEWING OPERATIONS - BUT WITH MIDDLE SEAM GUIDE AND 2-PART LEVELING FOOT

NEEDLE DISTANCE

SET: -

NEEDLE HOLDER

INNER FOOT

OUTER FOOT

PLATE

NEEDLE PLATE

FEED DOG

6mm 558 341 009-6

559 1203 09 559 4712 09 559 4616 09 559 1177 13 559 4420 13 559 4512 13

8mm 558 341 009-8

559 1204 09 559 4713 09 559 4618 09 559 1178 13 559 4421 13 559 4513 13

10mm 558 341 009-10

559 1205 09 559 4714 09 559 4620 09 559 1179 13 559 4422 13 559 4514 13

12mm 558 341 009-12

559 1206 09 559 4715 09 559 4622 09 559 1180 13 559 4423 13 559 4515 13

08. SEWING ACCESSORIES09.02. NEEDLE GAUGE PARTS / 2-NEEDLE / MIDDLE SEAM GUIDE AND 2-PART LEVELING FOOT

DIN 913 M4x4



08. SEWING ACCESSORIES


09/2019 PARTS LIST VETRON 5300 - POST BED MACHINE 83

84 01. TABLE STAND

09. TABLE STAND

559 3188 09

559 1137 09(Table plate 1200×600 mm)

559 1084 14

DIN WN 6x35 (4x)

11-00030-35Pedal KES-B-1000-L

11-001129-35 (Option)Pedal K-20 for electric height adjustable stand

11-00123-35 (Option)Pedal K-40-T for electric height adjustable stand for sitting or standing operation

01-00115-35(Height adjustable stand incl. Pedal (KES-B-1000-L))

01-01500 (Option)(Electric height adjustable stand for sitting or standing position (KES-2000) without pedal

01-01520 (Option)Electric height adjustable stand for sitting or standing position with rolls (KES-2000-RO075) without pedal



09. TABLE STAND



INDEX - PARTS OF SEWING MACHINE

At the time of printing, all information and illustrations in this document were up-to-date.

Technical changes without prior notice!

NOTE!

» Please take note of, we will not be liable for spare parts and accessories, not purchased from us. These parts were neither examined by us, nor released. Consequently, the installation or use of these products can have a negative influence on features and your workflow of the machine.

» We accept no liability for any damage caused by the use of non-original parts.

» Parts which are boxed have a underlined number. These parts have a assembly part number!

» The part numbers in the box can be seperately ordered.

» Parts with a means this part is new designed. The previous version is found at the end of the chapter. After consumption they will no longer be available.




PART NUMBER PAGE PART NUMBER PAGE

Symbole01-00115-35 84Height adjustable stand incl. Pedal (KES-B-1000-L)

01-01500 84(Electric height adjustable stand for sitting or standing position (KES-2000) without pedal (Option)

01-01520 (Option) 84Electric height adjustable stand for sitting or standing position with rolls (KES-2000-RO075) without pedal

1F-014 64Thread Stand / 3-Spools

006F00030 64Thread Stand / 2-Spools

11-00030-35 84Pedal KES-B-1000-L

11-00123-35 84Pedal K-40-T for electric height adjustable stand for sitting or standing operation (Option)

11-001129-35 84Pedal K-20 for electric height adjustable stand (Option)

93WF2-001 17Screw

130.13.600 14Spring (0,45)

179WF5-001 19Needle bar (2-Needle)

230 1000 08 24Holder

500 011 404 19Screw

500 034 322 54Rubber plug

500 035 330 56Display button (Joy key)

500 035 501 56Display button AB

500 035 502 56Display button CD

500 035 506 56Display button (Parameter)

500 035 510 56Display button (Escape)

557 110 112 75Adjustment gauge


557 110 120 75Clamp


558 302 009 77Needle gauge parts



558 321 009/6 80Needle gauge parts








558 701 000 68Roller & straight guide with fine adjustment

558 702 000 68Straight guide with quick adjustment of two distances

558 710 000 72Electric edge guide

558 711 000 73Height adjustable edge guide assy

558 740 000 71Eye Guard

558 8000 04 62Hexagonal wrench s=1,3 black

559 0006 11 12, 13Collar

559 0009 09 24Cover

559 0010 09 09Cover

559 0014 10 46Clamp

559 0026 10 31Shaft

559 0029 10 31Crank





559 0032 10 31Eccentric bushing

559 0035 10 31Washer

559 0038 10 31Shaft

559 0043 09 31Elevator mechanism assy

559 0047 10 31Crank


559 0060 10 19Collar

559 0061 10 45, 50Timing belt pulley

559 0062 15 50Balance wheel

559 0072 10 17Crank-arm shaft

559 0075 09 19Pendular assy

559 0080 10 19Guide way

559 0081 10 19Plate

559 0085 10 20Crank

559 0087 10 20Spring guide

559 0091 10 21Gear wheel

559 0092 10 20Gear wheel

559 0093 10 20Spring (Standard)

559 0095 10 20Shaft

559 0096 10 21Bolt

559 0098 10 17Shaft

559 0099 10 21Gear wheel segment

559 0102 10 20Collar

559 0103 10 17Slide block

559 0104 09 17Thread take up assy (1-Needle 26mm)

559 0117 10 21Gear wheel

559 0119 13 12, 13Shaft

559 0121 33 09Cover

559 0126 35 09Cover

559 0127 36 09Cover

559 0130 09 12Frame assy (1-Needle)

559 0132 13 12, 13Thread guide

559 0133 13 12, 13Thread guide

559 0145 09 46Stitchregulator assy

559 0160 09 45Coupling assy

559 0163 09 17, 18Stitchregulator - top feed

559 0166 10 45Timing belt pulley

559 0169 10 17Shaft

559 0173 00 47Lever with bolt

559 0181 10 47Crank

559 0188 10 45Timing belt pulley

559 0192 10 45Shaft

559 0196 10 46Gear wheel

559 0197 10 46Bolt

559 0198 10 46Shaft

559 0199 10 46Shaft

559 0218 35 63Rubber cushion

559 0220 35 24Rubber cushion (1-Needle)



559 0227 33 24Frame

559 0229 33 24Frame behind

559 0230 35 24Cover behind

559 0231 35 24Cover

559 0233 35 63Oil pan

559 0237 30 12, 13Di�usion lens

559 0239 09 20Top foot assy

559 0244 35 63Oil pan

559 0252 10 30, 45Adapter screw

559 0294 09 13Thread tension (2-Needle)

559 0296 16 12Tension spring

559 0299 09 22Holder assy

559 0301 10 35Washer

559 0324 14 35Felt ring

559 0337 35 35Rapper

559 0351 10 38Coupling

559 0352 14 45Star

559 0354 13 63Hinge

559 0375 09 12Needle thread tension assy

559 0392 15 10Key cape

559 0393 13 14, 17Tension disc

559 0394 13 10Frame balance wheel

559 0395 15 10Ballance wheel

559 0396 69 10Key cape

559 0397 69 10Key cape

559 0398 15 10Key cape

559 0407 16 28, 29Bed plate cover

559 0418 10 21Plate

559 0420 00 46Gear wheel assy

559 0422 00 21Gear wheel assy

559 0424 16 28, 29Slide plate

559 0429 13 12, 13Thread guide

559 0430 36 12Endcarriage

559 0432 12 63Bearing bracket

559 0435 15 63Connection sheet

559 0437 09 54Hook oil reservoir assy

559 0441 09 37Solonoid thread catcher

559 0458 39 63Industrial Gas Spring GS-22-70-DD

559 0469 11 50Shaft

559 0471 16 13Tension spring

559 0479 10 45Holder

559 0480 00 20Slide rod assy

559 0486 00 50Shaft with coupling

559 0493 13 12, 13Thread guide

559 0496 10 47Bolt

559 0499 10 10Spring

559 0501 59 12, 13LED-PCB

559 0506 59 10Circuit board






559 0507 59 59Head base with CPU

559 0514 59 22Foot distance sensor PCB assy

559 0528 59 16PCB

559 0551 59 56Display button (cut)

559 0552 59 56Display button (needle position)

559 0553 59 56Display button (light)

559 0554 59 56Display button (new program)

559 0556 59 56Display button (save)

559 0560 59 16Foot distance sensor PCB assy

559 0568 59 56Display button (chain program)

559 0580 59 12, 13LED PCB with thermal pad

559 0612 59 57Cable

559 0613 59 59FFC-Cable

559 0618 59 10, 59Display Connector

559 0626 59 62USB Flash Drive - Admin

559 0628 59 62USB Flash Drive - Operator Optional

559 0629 59 57Control box VE 8340

559 0633 59 59Head base cable

559 0637 59 60Thread tension cable

559 0638 59 60Trimmer cable

559 0641 59 56Control panel basic machine

559 0644 59 16, 59Foot position sensor cable

559 0646 59 60CTL-cable

559 0649 59 10Cable

559 0654 59 57Power cable

559 0655 59 45Cable encoder

559 0657 59 60Head cable extension

559 0663 59 10Bobbin winder cable

559 0666 59 74Cable sensor

559 0667 59 37Aptapter cable for 2-Needle

559 0668 59 70, 74Adapter slide control cable

559 0682 59 73Cable

559 0699 59 67Knee switch with cable

559 0704 59 12, 13Thread tension actuator

559 0710 59 21Presser foot stepper motor

559 0713 59 46Steppermotor Fei long

559 0714 59 21Top feed stroke motor

559 0715 59 72, 73Linear actuators with nut

559 0716 59 13Thread tension actuator (2-Needle)

559 0720 59 72, 73Cable

559 0721 59 72, 73Cable

559 0722 59 72, 73Cable

559 0723 59 71Adapter electr. eye guard assy

559 0729 59 74Adapter cable

559 0776 59 73Adapter cable with switch

559 0777 59 73Stepper Motor with cable

559 0804 10 24Plate

559 0812 10 20Screw





559 0820 10 16Guide assy

559 0835 09 22Foot distance sensor assy

559 0841 09 10Carrier with solenoid

559 0842 35 24Foam block

559 0844 09 24Cover behind - assy

559 0847 11 19Holder

559 0848 10 16Screw

559 0856 30 62Head cover

559 0863 14 24Bushing

559 0896 14 19Felt


559 0921 13 24Thread guide

559 0922 11 56, 62Fixation for Display

559 0926 09 14Thread guide assy

559 0953 11 16Cable holder

559 0956 15 16Cover

559 0957 14 50Star

559 0958 10 11Spring

559 0960 09 34Rotary hook assy (26mm)

559 0963 14 19Felt

559 0964 01 16Plate assy

559 0968 11 16Cable holder

559 0984 11 16Holder

559 0999 10 68Adapter for additional equipment

559 1003 09 47Lever with bushing

559 1004 09 31Feeding mechanism assy

559 1011 10 36Gear wheel

559 1012 10 36Cam

559 1013 10 36Clamp

559 1014 10 37Shaft

559 1015 10 36Shaft with gear wheel

559 1016 10 36Shaft

559 1019 10 36Gear wheel

559 1031 10 37Carrier

559 1032 10 37Catcher

559 1038 10 40, 41Slide block

559 1039 10 40, 41Carrier

559 1040 00 40, 41Plate assy

559 1043 10 40, 41Bolt

559 1051 10 38Shaft

559 1052 09 35Oil distributor assy

559 1056 09 36Bobbin case opener assy

559 1057 10 36Carrier

559 1059 10 36Plate

559 1061 11 11Angle

559 1062 35 29Plate (2-Needle)

559 1063 10 35, 36Spring holder

559 1067 09 41Center post 2-Needle





559 1068 10 41Post bed center 2-Needle

559 1069 10 38Thread cutting cam

559 1071 09 46, 47Crank assy

559 1080 09 40Center post assy

559 1081 11 40Post bed center 1-Needle

559 1084 14 84Socket

559 1086 09 37Lever assy

559 1092 09 40, 41Lever assy

559 1094 16 40Cover

559 1096 35 28Plate (1-Needle)

559 1099 00 40, 41Plate assy

559 1101 10 35Spring

559 1103 11 35Cover

559 1105 09 63Chain with plastik tube

559 1106 10 36Bobbin case opener

559 1107 09 36Bushing assy

559 1108 10 37Correcting adapter

559 1111 11 35Plate


559 1116 10 37Thread trapper

559 1120 14 24Oil tube

559 1126 10 36Bushing

559 1128 09 36Bushing with needle ring

559 1131 10 37Knife

559 1135 09 35Cover assy

559 1137 09 84Table plate 1200x600

559 1143 03 74Cover - left

559 1144 03 74Cover - right

559 1145 10 74Holder

559 1151 09 74Cover control kit 1-Needle

559 1152 09 74Cover control kit 2-Needle

559 1153 11 70Holder

559 1155 09 70Safety Switch Kit

559 1172 10 39Thread cutting cam left

559 1177 13 80, 81Plate

559 1178 13 80, 81Plate

559 1179 13 80, 81Plate

559 1180 13 80, 81Plate

559 1203 09 80, 81Needle holder

559 1204 09 80, 81Needle holder

559 1205 09 80, 81Needle holder

559 1206 09 80, 81Needle holder

559 1240 09 40Lever assy

559 1243 09 19Needle bar assy - Deepstitch

559 1244 09 40Center post assy - Deepstitch

559 1245 11 40Post bed center Deepstitch

559 1246 10 37Shaft

559 1247 09 36Shaft with gear wheel





559 1248 09 36Bushing with needle ring

559 1249 16 40Cover

559 1261 00 40Plate assy


559 1265 09 67Table assy. for Deepstitch post bed machine

559 1268 00 40Plate assy

559 1274 03 72Bolt assy - Deepstitch

559 1700 09 11Bobbin winder

559 1708 15 16, 72, 73Cover

559 1709 00 13Block assy

559 1710 09 10Control & Bobbin Winder

559 1711 35 45Timing belt

559 1713 35 45Seal ring

559 1719 09 13Frame assy (2-Needle)

559 1723 09 13Thread tension assy (2-Needle)

559 1742 03 13Thread guide (2-Needle)

559 1747 35 45Timing belt

559 1760 59 45Main motor Typical/YM24-D assy

559 1763 10 72, 73Plate

559 1766 16 72Carrier

559 1767 31 72, 73Nut

559 1768 10 72, 73Carrier

559 1769 10 72, 73Spring Z-081 RI

559 1770 11 73Bolt

559 1772 16 72, 73Carrier

559 1773 39 72DryLyn W chain guide

559 1774 09 72, 73Guide bloc

559 1775 09 72, 73Housing with bushing

559 1776 39 72Knurled screw

559 1777 31 72Knurled nut

559 1787 01 72, 73Bolt assy

559 1798 13 12, 13Thread guide (26mm)

559 1799 10 72, 73Pin

559 1803 13 73Angle

559 1804 13 73Holder

559 1805 13 73Bolt

559 1806 13 73Bolt

559 1855 10 13Thread take up spring C/D

559 1856 10 13Thread take up spring C/D

559 1865 13 73Bolt

559 1867 10 73Bolt

559 1886 09 17Thread take up assy (2-Needle 26mm)

559 1893 09 69Barcode scanner

559 1899 11 72, 73Bolt

559 2153 16 57Carrier

559 2155 09 57Set point device

559 2161 09 57Connecting rod

559 2162 06 57Mounting kit for control box





559 2205 09 75Service Kit

559 2600 10 71Eye guard 44mm

559 2601 09 71Plate assy

559 2606 21 71Bu�er

559 2609 09 71Plate assy

559 2616 10 10Copper plate

559 2617 14 39Cover

559 2621 34 53L-connector

559 2622 10 13Adapter

559 2630 11 72Bolt


559 2670 09 69Needle cooling

559 2679 10 34, 62Bobbin (26mm)

559 2695 09 20Top foot assy

559 2769 09 10Head electronics assy without bobbin winder

559 2777 11 63Plate

559 2793 36 72, 73Cover

559 2878 11 72, 73Collar

559 2879 11 72, 73Bloc

559 3001 09 19Needle bar assy


559 3006 15 72, 73Cover

559 3014 34 53L-connector

559 3015 34 53Y-connector

559 3016 34 53Y-connector

559 3106 11 62Anti-tamper protection

559 3107 34 52, 53Oil tube 3x5

559 3108 34 52, 53Oil tube 6x8

559 3109 34 52, 53Oil wick Ø 2mm

559 3110 09 34Hook without bobbin case (26mm)

559 3117 10 71Eye guard 26mm

559 3121 10 71Eye guard 31mm

559 3161 09 73Connecting rod assy

559 3166 10 24, 73Frame

559 3188 09 84Drawer

559 3192 39 76Threading Scheme Sticker

559 3193 39 76Health Hazard Sticker

559 3194 39 76Environment Sticker

559 3195 39 76Grounding Sticker

559 3218 13 11Lever

559 3226 10 34Spring (0,35)

559 3229 09 34Bobbin case (26mm)

559 3233 10 34Screw

559 3234 10 34Screw

559 3235 11 34Tension spring (26mm)

559 3237 10 34Screw

559 3238 10 34Lubrication plate (26mm)

559 3240 10 34Hook gib (26mm)




559 3242 10 34Needle guard (26mm)

559 3245 10 34Screw

559 3619 09 65Tread stand

559 3629 03 66Thread Guide with tube

559 3633 30 66Tube - 1000mm

559 3637 09 65Clamp

559 3638 30 66Tube - 400mm

559 3642 09 64Thread Stand / Mounting-Kit-Vetron

559 3644 09 66Spindle Shaft Clamp (Thread stand)

559 3646 09 65Pipe- 600mm

559 3647 09 65Pipe - 600mm

559 3648 09 65Pipe - 800mm

559 3649 09 65Pipe - 400mm

559 3650 09 65Mounting-Kit Vetron

559 3652 15 66Foam

559 3653 10 66Cover for thread stand cops

559 3658 09 64Thread Stand - 1-Needle / Deepstitch

559 3659 09 64Thread Stand / 2-Needle

559 3660 11 73Collar

559 3661 11 73Cam

559 3662 10 73Plate

559 3663 10 73Threaded Spindle

559 3664 11 73Angle

559 3665 16 73Carrier

559 3666 16 73Cover

559 4030 13 77, 78Stitch plate

559 4033 13 78Stitch plate

559 4130 13 77, 78Feed dog

559 4134 13 78Feed dog

559 4201 09 77Outer foot

559 4300 13 77, 78Inner foot

559 4315 13 78Inner foot

559 4320 13 78Inner foot

559 4420 13 80, 81Needle plate

559 4421 13 80, 81Needle plate

559 4422 13 80, 81Needle plate

559 4423 13 80, 81Needle plate

559 4512 13 80, 81Feed dog

559 4513 13 80, 81Feed dog

559 4514 13 80, 81Feed dog

559 4515 13 80, 81Feed dog

559 4600 09 80Outer foot

559 4601 09 80Outer foot

559 4602 09 80Outer foot

559 4603 09 80Outer foot

559 4616 09 81Outer foot

559 4618 09 81Outer foot

559 4620 09 81Outer foot






559 4622 09 81Outer foot

559 4623 13 78Outer foot

559 4624 13 78Outer foot

559 4700 13 80Inner foot

559 4701 13 80Inner foot

559 4702 13 80Inner foot

559 4703 13 80Inner foot

559 4712 09 81Inner foot

559 4713 09 81Inner foot

559 4714 09 81Inner foot

559 4715 09 81Inner foot

559 6200 59 73Cable


559 7018 09 16Foot distance sensor assy

559 9030 10 71Spring

559 9044 34 12, 13, 60Heat transfer pad

559 9139 09 12, 60Light clamp cable with thermal pad (1-Needle)

559 9141 09 13, 60Light clamp cable with thermal pad (2-Needle)

BB029006230 35O-Ring 3,5x1,5

B966234009 45Spring

B966235009 45Shell

BX85720609 45Screw

BX85728009 54Pipe

BX85729009 35Screw

BXF7055909 54Clamp spring

BXF7060009 54Oil pipe

CC144588201 12Thread tension spring (C) - standard

C144588301 12Thread tension spring (B)

DD-117 A 72, 73Spring

D-222 E 20Spring - Low pressure

GGN 529-15-M5x16 67Knurled screw

HH1P-N66-NA-M1 54, 73Clamp

Kk10x13x10 36Needle ring

KG-AA 68Edge guide (43mm)

KG-AB 68, 72, 73Edge guide (30mm)

KG-B14 Ø 14mm 68Roller Ø 14mm

KG-BZ 68Edge guide (24mm)

KG-S04 Ø 04mm 68Roller Ø 04mm

KG-S11 Ø 11mm 68Roller Ø 11mm

MMB3A -N66-NA-C1 54Self cable tie

OO-Ring 3513x1,7

QQT0000044 76Safety Sticker

RRoller bearing 50K18x22x13

SS105201003 19Screw

S150232005 20Srew





S151004003 62Hexagonal wrench s=3



S151004009 62Hexagonal wrench for needle screw

S151004012 62Hexagonal wrench s=2,5

SuS 6346 62Oil can with 0,4l oil

WW060302001 62Oil

W060401017 62Screw driver L

W060401023 62Screw driver S

WN56 - 6×30 63Bolt

ZZ-051NI 35Spring


VETRON TYPICAL EUROPE GmbHClara-Immerwahr-Str. 6 67661 Kaiserslautern, GermanyTel.: +49 6301 320 75-0 Fax: +49 6301 320 75-11

[email protected]

ve partslist 5300 v2

Documents