VECTIS - VINIS - DUO

www.tecnoma.com

VINIS, DUO and VECTIS3 sprayers with different designs to answer every specific need.

VINISpump + turbine + boom on the front

DUOspraying unit on the 3 point linkage with an articulated trailer behind

VECTISpump on the front / turbine + boom behind

Lift arm linkage on vectis

articulated drawbar on vinis

cranked sliding half axle

a modern design to optimize appLication, with a mixture of ergonomics, performance and environmentaL respect.

ChaSSIS a reliable design to resist intense use in any conditions.

Fabricated steal chassis �Polyester coating and epoxy primer for extreme chemical �resistance

LINkagEcreated to maximize stability and steering.

VINIS: articulated drawbar for tight turning �DUO: 3 point linkage spraying unit with an articulated �trailed tankVECTIS: Link arm hitching with rotating drawbar and �longitudinal settings

axLESmultiple settings to adapt the equipment to any vineyard.

2 cranked half axles sliding into an axle holder => track �width and clearance settingsLongitudinal setting for the axle position �

main and rinsing tanks on vectis

tank equipment

automatic belt tensioner

vectis turbine column

TaNkSthe tanks were designed to minimize residual spray and to facilitate the rinsing management. the tank assembly has a smooth ergonomic shape to preserve the vegetation whilst driving through the crop.

High density polyethylene rotomoulded tanks, for rigidity �and durability with smooth inner tank walls to limit waste residues for easy cleaningVINIS and DUO tanks: �

Main tank: 600 ℓ and 800 ℓ -Rinsing tank 55 ℓ and 70 ℓ -

Narrow VECTIS tanks: �Main tank: 800 ℓ and 1000 ℓ -Rinsing tank: 85 ℓ -

Standard VECTIS tanks: � Main tank 1000 ℓ and 1200 ℓ -Rinsing tank: 120 ℓ -

15 ℓ built-in hand wash tank �Variable pressure agitation to keep an even mixture �2 rotating washing nozzles for complete flushing �External tank gauge on the front right hand side �Centralised sump to ensure total emptying �

FaNfan efficiency is essential for a good quality application. maximum output with a turbine as close as possible to the hands and canons.

VINIS and DUO: 450mm fan on the front. 26hp required �VECTIS: 450mm or 560mm fan on the rear. 26hp �or 35hp requiredSteel fan housing for maximum air speed �Fan may be disengaged due to a dog clutch system �Free wheel between the pump and the fan to avoid �overrun vibrationsBelt drive fan with automatic tensioner on the belt: �gas ram keeping the right tension at all timeOil bath bearing gearbox with outside oil gauge giving �durability and easy access for maintenance8 output air manifold with equal distribution �

centralised operating area

induction hopper and can wash (option)

Lav’ton: rotary washing nozzle

gravity or integrated autonet

Rinsingtank

Transfertvalve

Main tank

Electric tractor circuit

EaSy OpEraTINg arEaa water circuit for all uses with a centralised and ergonomic easy operating area.

Accessible suction filter for daily cleaning �Chemical induction and can wash �Variable agitation �Spraying controls �Main tank cleaning with 2 rotary washing nozzles �Ability to clean the boom water circuit without any returns �to the main tank

Options: Gravity Autonet: sequential tank dilution system driven -from the cabIntegrated Autonet: sequential tank dilution through the -water pump and driven from the cab (only for VECTIS)

pUmp aND FILTErSself priming piston diaphragm pump. high and regular flow for good agitation and application.

VINIS & DUO: Piston diaphragm pump PM150 giving �70 ℓ/min and 15 barsVECTIS: Piston diaphragm pump PM190 giving �105 ℓ/min and 15 bars500 micron filling filter �594 micron suction filter with a none return valve: �the filter may be cleaned with a full tank

Option: 365 micron pressure filter

pressure gauge

in cab joystick to manage the sprayer

pneumatic air regulator reguLair

rEgULaTIONregulation and distribution are the main keys for an evenly distributed spray along the boom.

reguLair: regulation by manual pressure adjustment with pneumatic regulator.

A simple and ergonomic control on every sprayer function with joystick:

Section control �Regulation (dependant on equipment and options) �Boom movement (dependant on equipment and options) �

REGULAIR guarantees good pressure stability during spraying and automatically compensates the section cut off without any calibrated return adjustment.

100 mm diameter pressure gauge �Boom sections control by TECNOMA’s solenoid valves �Semi continuous circulation for fast section closing and �openingRegulation returns go to the pump suction for a perfect �control of the tank returns

regulation valve for dpae

vititronic control box for dpae

VITITrONIC DpaE rEgULaTIONRegulation proportional to the forward speed (DPAE). The regulation valve adapts the spray and flow according to the forward speed to apply the same rate anywhere on the vineyard.

How it works:

Rate setting in ℓ/ha �Speed sensor fitted to tractor or sprayer wheel �Pressure sensor on the boom �Flow regulation according to the pressure and the speed �Spraying control box in the cab �Easy adaptation to various plantation widths and heights �20 fields records: surface, volume and distance travelled �

pneumatic 4 finger hand with dcv and monostop

vitisit boom with pneumatic equipment

face by face preciJet equipment

ThE Spraythe right dose in the right place while reducing atmospheric drift.

pneumatic:

Every “gun” is equipped with an fixed internal diffuser in �the centre to ensure an evenly distributed circular spray patternPolyethylene hands and cannons: can be adapted to any �vineyard with a high shock resistance3 dimensional settings for the hands �Monostop: DCV and individual cut off system �

preciJet: application control and drift reduction. a spraying system which allows you to reduce chemical quantities without reducing chemical application to the plant.

Air flow assisted face by face spraying system.

Polyethylene tube: light, robust and shock resistant �Cone shape tube: fluidity through the rows and equal �speed and volume from the top to the bottom of the air output.Retractable attachment with automatic return in case of �collision26 hp turbine: low power and fuel consumption �Linear air flow all the way up: equal application �1250 mm high for standard PreciJet: 4 nozzles / face �with orientation adjustment and height settings MonoStop Nozzle holder with anti-drip DCV �Hollow Cone ceramic nozzles: perfect rate control and �durability

Option: 1 670 mm high for PreciJet with 5 nozzles

narrow equipment

vitifix

Key points:

Equal application and air distribution along the boom �Optimum spray penetration into the canopy �Perfect rate control thanks to ISO nozzles �Air speed control depending on vegetation density �Spray localisation according to vegetation height �Possibility to work without air assistance (usually at the �beginning of the season)Optimized air flow: PreciJet uses low air volume. 450 mm �turbine and 26 hp: low power and fuel consumptionAtmospheric and ground drift reduction: chemical rate �reduction without reducing application to the plant

BOOmSdifferent types of booms and spraying equipment to adapt your sprayer to any vineyard type.

TECNOMA booms are fitted on the turbine housing with either manual or hydraulic height control (dependant on equipment and options).

narrow equipment: pneumatic 4 hands and 4 cannons

Adjustable cannons are fitted on a fixed boom �Compatible with VINIS, DUO and VECTIS �

vitifix: pneumatic 4 hands and 4 cannons

Cannons fitted on a horizontal runner: manual position �settingManual cannon orientation settings �Compatible with VINIS, DUO and VECTIS �

polyethylene tube

with a conic profile giving a uniformed air repartition along

the boom

pneumatic assistance: Linear air flow for good penetration into the vegetation

and canalized spray spectrum.

vitisit

hydrauLic vitimoBiL with preciJet equipment

vitivario vg with preciJet

vitisit: pneumatic 4 hands and 4 cannons

Cannons fitted on a hydraulic horizontal runner: left and �right are independently hydraulically adjustedManual cannon orientation setting �Compatible with VINIS, DUO and VECTIS �

manuaL vitimoBiL: pneumatic 4 hands and 4 cannons

2 manual lateral folding arms with safety system �Cannon position setting along the boom �Manual cannon orientation setting �Compatible with VINIS, DUO and VECTIS �

hydrauLic vitimoBiL:

Pneumatic: 4 hands and 4 cannons �Precijet: 4 PreciJets face by face, sliding along the boom �to spray 2 complete rows from 1,5m to 2,5m plantation width2 hydraulic independent lateral folding arms �Compatible with VINIS, DUO and VECTIS �with pneumatic equipmentCompatible with VINIS and VECTIS with PreciJet �equipment

vitivario and vitivario vg:

Pneumatic: 4 hands and 4 cannons �PreciJet: 4 or 6 PreciJets face by face, sliding along �the boom to spray 2 or 3 rows. From 1,5m to 4,5m plantation width with 4 PreciJets and from 1,5m to 2,5m plantation width with 6 PreciJets2 hydraulic independent lateral folding arms mounted on �a horizontal runner giving hydraulic lateral setting at all timesCompatible with VINIS, DUO and VECTIS with pneumatic �equipmentCompatible with VINIS, DUO and VECTIS with 4 PreciJets �Compatible with VECTIS with 6 PreciJets �

Booms total width unfolded

total width folded

height between

boom and ground

Lifting setting

vitifix 2000 mm 1500 mm on VINIS 1640 mm

400 mm

vitisit ii 3400 mm 2200 mmon VECTIS 1900 mm

400 mm

manuaL vitimoBiL 3720 mm Ø on VINIS

1640 mm400 mm

hydrau-Lic

vitimoBiL3720 mm Ø on VINIS

1640 mm400 mm

vitivario de 5600 to 6550 mm

Ø on VECTIS 1900 mm

400 mm

Booms total width unfolded

total width folded

height between

boom and ground

Lifting setting

vitifix 2000 mm 1500 mm on VINIS 1640 mm

400 mm

vitisit ii 3400 mm 2200 mmon VECTIS 1900 mm

400 mm

manuaL vitimoBiL 3720 mm Ø on VINIS

1640 mm400 mm

hydrau-Lic

vitimoBiL3720 mm Ø on VINIS

1640 mm400 mm

vitivario de 5600 to 6550 mm

Ø on VECTIS 1900 mm

400 mm

description vinis 600 vinis 800 duo 600 duo 800 vectis 800e

vectis 1000e

vectis 1000

vectis 1200

cha

ssis,

turb

ine

and

wat

er c

ircui

t

Chassis Design Turbine boom and pump on the front

Spraying unit (turbine, boom and pump) on the 3 point linkage with

an articulated trailer behind

Pump on the frontTurbine and boom behind

Turbine 450 mm - 26 CV 450 mm - 26 CV - PreciJet 560 mm - 35 CV - Pneumatic

Clutch type Manual clutch

Transmission Oil bath bearing gearbox and automatic tensioner on the belt Oil bath bearing gearbox and automatic tensioner on the beltFree wheel between the pump and the fan

Axle 2 cranked half axles slinding into an axle holder2 longitudinal axle settings

2 cranked half axles slinding into an axle holder4 longitudinal axle settings

Tyres 185/65 R15 185/65 R15 205/70 R15 235/70 R15

Mud guard Ø Serie (depend on configuration)

Drawbar Articulated drawbar 3 point linkage Link arm hitching

Main tank 600 ℓ 800 ℓ 600 ℓ 800 ℓ 800 ℓ 1000 ℓ 1200 ℓ

Remote drain Serie

Lav’Ton 2

Agitators 2 4

Rinsing tank 55 ℓ 70 ℓ 55 ℓ 70 ℓ 85 ℓ 120 ℓ

Hand wash tank 15 ℓ

Pump PM150 de 70 ℓ/min PM190 de 105 ℓ/min

Filtration 500 micron filling filter594 micron suction filter with nne return valve

Regulation REGULAIR, constant pressure regulation

Pressure gauge Ø100 mm

Distribution TECNOMA solenoid valves

Sections 2 setions

Step Ø Serie

Hydraulic lift Serie with PreciJet Ø Serie with PreciJet

Hydraulic Hydraulic command by circuit selection (except VITIFIX and manual VITIMOBIL)

Boom

s

NARROW EqUIPMENT Pneumatic equipment (4 hands et 4 cannons)

VITIFIX Pneumatic equipment (4 hands et 4 cannons)

VITIMOBIL Pneumatic equipment (4 hands et 4 cannons)

VITISIT II Pneumatic equipment (4 hands et 4 cannons)

HYDRAULIC VITIMOBIL Pneumatic equipment or PreciJet 4 faces Pneumatic Pneumatic or PreciJet 4 faces

VITIVARIO Pneumatic equipment or PreciJet 4 faces Pneumatic equipment or PreciJet 4 or 6 faces

Hydraulic lift Serie with PreciJet

Hydraulic control Circuit selection - 2 double acting control valves or 1 double acting and 1 single acting control valves (depend on booms) (No hydraulic control on VITIFIX and manual VITIMOBIL)

opt

ions

Articulated drawbar Ø XStep Ø X Ø

Tyres 26.1200 R12 205/70 R15 26.1200 R12

26.1200 R12 29x12.5x15 235/70 R15

29x12.5x15

Axle Ø Double axle with 165/70 R14Bogie with 6x9x10

Induction hopper XCan wash XSpirovit X

Pressure filter 365 micron pressure filterSections 4 sections instead of 2

Sequential dilution Gravity Autonet Gravity AutonetIntegrated Autonet

Hose reel and hand lance XPressure setting from the cab with REGULAIR X

DPAE regulation VITITRONIC XOther pneumatic equipment X

TELESIT for cannons X

PreciJet length 1670 mm - 5 nozzles instead of 1250 mm - 4 nozzles

VITIMOBIL EXTENSIONS Extension for 4780 mm boom total width Ø Extension for 4780 mm boom total width

Hydraulic lift Hydraulic lift with single acting or double acting control valve from the tractor with pneumatic equipment

ED hydraulic distribution X

TECNOma SErVICEA worldwide network

Genuine parts available on CD and all the NOZAL nozzles range. www.nozal.fr

Dealer stamp

S.A.S. - Capital 1 174 400 euros - R.C.S. EPERNAY B 350 484 309 - 54 rue Marcel PAUL - F - 51206 EPERNAY CEDEX Tél. 33 (0)3 26 51 99 99 - Fax 33 (0)3 26 51 83 51 - Site : www.tecnoma.com - Email : tecnoma@tecnoma.com

january 2012

H1

L2 L3L1

H1

L2L1

L3

L4

L5

H1

L3 L2L1

vectis vinis

duo

Join us on

http://fr-fr.facebook.com/groupe.tecnoma

L1 total length L2 L3 L4

total widthL5

tank widthh1

tank height tyres

vinis 600 2530 1655 to 1755 875 to 775 1090 990 990 185/65 R15

vinis 800 2680 1760 to 1830 920 to 850 1200 990 990 185/65 R15

duo 600 2990 2340 650 1090 990 990 185/65 R15

duo 800 3140 2490 650 1200 990 990 185/65 R15

vectis 800e 2790 1940 850 1244 1050 1050 185/65 R15

vectis 1000e 2790 1940 850 1257 1090 1050 205/70 R15

vectis 1000 2995 2050 945 1250 1210 1200 235/70 R15

vectis 1200 2995 2050 945 1390 1210 1200 235/70 R15

DImENSIONS