vehicle alignment lift - automotive equipment, inc · 2019. 12. 12. · vehicle alignment lift why...
TRANSCRIPT
Vehicle Alignment Lift
Why the Y- Lift TM?
Shown: YA12NX 12,000 lbs. capacity
w/optional radius gauges
Because your service operation needs speed, performance and reliability to increase productivity and add dollars to your bottom line. That’s “Y”.
Rotary Lift’s 12,000 lbs. capacity Y-Lift uses a patented design to provide faster up/down speeds and more work area and access under the lift than traditional scissor lifts - 33% faster rise and 20% more workspace! Your technicians can get to work sooner and with fewer obstructions to get in their way. When it’s time for alignments, the Y-lift can handle them all - from tiny 71-1/2” wheelbases up to 158” giants. And, it’s compatible with all leading alignment instrumentation, including 3D and camera wheel alignment systems.
When you add all of this to Rotary’s legendary factory support and industry leading field service network, “Y” would you want anything else?
Unlike a parallelogram, the YA12 provides true up/down lifting. There is no forward or rearward movement reducing valuable bay space.
UPDOWNmovement
YA12
NOTE: Locking position heights from the bottom of base plates*
25 - 1/4”30 - 1/8”34 - 1/4”37 - 7/8”41”44”47”
*Varies based of floor slope and shimming.
Hydraulic cylinder, locking mechanism and position sensor are mounted inside runway to protect them from corrosives and physical damage.
Low profile ramps/chocks with rollers provide smooth operation.
The Y-Lift does so much more.. .for less!From the largest trucks to the smallest micro cars, it’s productivity you can afford!
Compared to traditional scissor lifts, the YA12 offers:• 20% more work space below the lift with over 5 times more clear floor space under the runways!• Twice the access points for easy movement - front, rear & sides.• Side to side walk through for accessing multi-bay projects & tool boxes and making wheel alignment adjustments.
With oversized slip plates and adjustable radius guage pockets, one lift accommodates a large range of wheelbases, 71-1/2” to 158” for 4-wheel alignment.
EXCLUSIVE!
EXCLUSIVE!
EXCLUSIVE!
YspaceTM provides techs additional room to work faster and easier
360 DEGREE VEHICLE ACCESS!
Shown: YA12NX 12,000 lbs. capacity
w/optional radius gauges
Radius gauge pockets are2” deep and
adjustable for alignment flexibility.
The Y-Lift does so much more.. .for less!From the largest trucks to the smallest micro cars, it’s productivity you can afford!
Compared to traditional scissor lifts, the YA12 offers:• 20% more work space below the lift with over 5 times more clear floor space under the runways!• Twice the access points for easy movement - front, rear & sides.• Side to side walk through for accessing multi-bay projects & tool boxes and making wheel alignment adjustments.
*Rise speeds vary with vehicle weight.
EXCLUSIVE!33% FASTER!
Innovative weight sensing control system maximizes rise speed
based on vehicle weight. Vehicles raise in 37 seconds* - at least 33%
faster than comparable scissor lifts.
Patented design allows for true up/down movement minimizing bay space!
UPDOWNmovement
EXCLUSIVE!
Pat. No. 6,059,263
YspaceTM provides techs additional room to work faster and easier
Options:• Can be flush mounted or recessed. • Single phase 208/230v • Extended ramps (14” longer than standard) • Flat top version available • Stainless-steel radius gauges • Stainless-steel base-plates • Stainless-steel rear slip plate pan • Lighting kit
Rotary World Headquarters2700 Lanier Drive Madison, IN 47250, USA
Contact InformationSales: p 800.640.5438 f 800.578.5438 e [email protected] Tech. Support: p 800.445.5438 f 800.822.6502 e [email protected]
Lit# YA12_2013.09 (SUPERSEDES Lit# YA12_2012.07)©2013 VEHICLE SERVICE GROUPSM, Printed in U.S.A., All Rights Reserved. Unless otherwise indicated, ROTARY LIFT, VEHICLE SERVICE GROUPSM, DOVER and all other trademarks are property of Dover Corporation and its affiliates.
GS07F8953D
WWW.ROTARYLIFT.COM
Shown: YA12NX 12,000 lbs. capacity
w/optional radius gauges
Shown: YA12NX 12,000 lbs. capacity
w/optional radius gauges
RAL3002RAL5005 RAL7040 RAL9005
Standard color of lifts are blue unless otherwise noted. Red, gray and black are available at no additional charge. Additional colors are available, consult your Rotary® representative for details.
*Lower and rise speeds vary with voltage and vehicle weight.
Specifications Model: YA12-L YA12-EL1
Capacity 12,000 lb. (5443 kg.)
Rise 68-3/16” (1732 mm)
A. Overall Length 260” (6604 mm) 270” (6858 mm)
B. Overall Width 88” (2235 mm)
C. Length of Runways 202” (5131 mm) 212” (5385 mm)
Max. Wheelbase 179-1/2” (4459 mm) 189-1/2” (4813.3 mm)
Max. 2-Wheel Align 164-1/2” (4178 mm) 174-1/2” (4432 mm)
Max. 4-Wheel Align 158” (4013 mm)
Min. 4-Wheel Align 71-1/2” (1816 mm)
D. Width of Runways 24” (610 mm)
E. Height of Runways 11-3/16” (284 mm)
F. Width Between Runways 40” (1016 mm)
Rise Time* 37 seconds
Lowering time* 45 seconds
Power 1Ø 208/230v
FIND US ON
B
E
42-1/2” (1080 mm)
C
D
A
F
18” (457 mm)
(508 mm)20”
NOTE: Locking position heights from the bottom of base plates*
25 - 1/4”30 - 1/8”34 - 1/4”37 - 7/8”41”44”47”
*Varies based of floor slope and shimming.
50”53”56”59”62”65”66 - 3/4”
www.rotarylift.com