vehicle technology division - access · pdf filevehicle technology division p.o. box 777 tel....

Vehicle Technology Division

P.O. Box 777 Tel. + 31 (0)79 345 81 43 Vehicle Approval and Information 2700 AT Zoetermeer Fax + 31 (0)79 345 80 43 The Netherlands www.rdw.nl WVTA 2002.24 v2.00 Page 1 of 4

THE NETHERLANDS (N E D E R L A N D)

EC TYPE-APPROVAL CERTIFICATE

Communication concerning:

- type-approval (1) - extension of type-approval (1) - refusal of type-approval (1) - withdrawal of type-approval (1)

of a type of vehicle with regard to Directive 2002/24/EC as last amended by Directive 2005/30/EC. EC type-approval number : e4*2002/24*1151*00

Reason for extension : Not applicable

Approval mark : e4*2002/24*1151

0. General

0.1. Make(s) (trade name of the

manufacturer) : Access

0.2. Type : SP250 Variant(s) : Not applicable Version(s)

: SP250-S

0.2.1. Commercial name(s) : Access Motor, as option: SS250R, Hammel, Quadzilla, Bogart Patriot, Nexmotor, Tomahawk, Apollo, Spike

0.3. Means of identification of type, if marked on the vehicle

: ???SP????????????

0.3.1. Location of that marking

: On the right side of frame body

0.4. Category (2)

: L7e

0.5. Name and address of the vehicle manufacturer

: Access Motor Co., Ltd. 5, Chung-Hsin Road, Chia-Tai Industrial Zone, Tai-Pao City, Chia-Yi, Taiwan, R.O.C.

mooiweer

Rond stempel

Type-approval number: e4*2002/24*1151*00

WVTA 2002.24 v2.00 Page 2 of 4

0.5.1. Name(s) and address(es) of assembly plant(s)


The undersigned hereby certifies the accuracy of the manufacturer’s description in the attached information document of the vehicle type described above, for which one or several representative samples, selected by the competent approval authorities, has (have) been submitted as prototype(s) of the vehicle type and that the attached test results are applicable to the vehicle type. The vehicle type meets/does not meet (1) the technical requirements of all relevant separate Directives (as last amended) listed in the table of Annex I to Directive 2002/24/EC. The approval is granted/refused/withdrawn (1).

Place : Zoetermeer

Signature :

Date :

Attachments: – – – –

Information document, Parts 1 and 2 (Annex II). Test results (Annex VII). Name(s) and specimen(s) of the signature of the persons authorised to sign the certificates of conformity and a statement of their position in the company. A model certificate of conformity.

(1) Delete where not applicable. (2) According to the classification introduced in Article 1.

tol

Peter van Tol + RDW stempel

mooiweer

Tekstvak

13-June-2006


WVTA 2002.24 v2.00 Page 3 of 4

ANNEX VII

TEST RESULTS

(Article 5(1), first subparagraph)

In each case, the information must make clear to which variant and version it is applicable. One version may not have more than one result. 1. Results of the sound level tests.

Number of the base Directive and latest amending Directive applicable to the approval.

In the case of a Directive with two or more implementation stages, indicate also the implementation stage:

- 97/24/EC Chapter 9 as last amended by 2005/30/EC Variant/version -- / SP250-S -- -- Moving dB(A) 79 -- -- Stationary dB(A) 82 -- -- at (min-1) 3500 -- -- 2. Results of the exhaust emission tests.

Number of the base Directive and latest amending Directive applicable to the approval.

In the case of a Directive with two or more implementation stages, indicate also the implementation stage:

- 97/24/EC Chapter 5 as last amended by 2005/30/EC, stage 2003 Variant/version -- / S -- -- 2.1. Type I CO (g/km) 2.203 -- -- HC (g/km) (1) 0.625 -- -- NOx (g/km) (1) 0.181 -- -- HC + NOx (g/km) (2) -- -- -- 2.2. Type II CO (g/min) (2) -- -- -- HC (g/min) (2) -- -- -- CO (% vol) at normal

idle speed (1) 0.071 -- --

Specify the idle speed (1) (3)

1500±100 -- --

CO (% vol) at high idle speed (1)

0.058 -- --

Specify the idle speed (1) (3)

2100±100 -- --

Engine oil temperature (1) (4)

64 °C at 1540 min-1 65 °C at 2190 min-1

-- --

mooiweer

Rond stempel


WVTA 2002.24 v2.00 Page 4 of 4

3. Compression ignition engine Variant/version -- -- -- Corrected value of

absorption coefficient (m-1)

-- -- --

(1) Only for motorcycles and motor tricycles and for quadricycles as defined in Article 1, paragraph 3(b). (2) Only for mopeds and for light quadricycles as defined in Article 1, paragraph 3(a). (3) Mention the measurement tolerance. (4) Applicable for four-stroke engines only.

mooiweer

Rond stempel

Access Motor Co., Ltd. 5, Chung-Hsin Road, Chia-Tai Industrial Zone, Tai-Pao City, Chia-Yi, Taiwan, R.O.C. Tel: 886-5-2377870 Fax: 886-5-2377875

CERTIFICATE OF CONFORMITY

CERTIFICATE OF CONFORMITY ACCOMPANYING EACH VEHICLE IN THE SERIES OF THE TYPE WHICH HAS BEEN APPROVED

The undersigned:

_______________ hereby certifies that the following vehicle:

0.1. Make: Access

0.2. Type: SP250 Variant: N.A. Version: SP250-S

0.2.1. Commercial name(s): Access Motor, as option: SS250R, Hammel, Quadzilla, Bogart Patriot, Nexmotor, Tomahawk, Apollo, Spike

0.4. Vehicle category: L7e

0.4.1. Vehicle category according to Directive 97/24/EC, Chapter 7: N.A.

0.5. Name and address of the manufacturer: Access Motor Co., Ltd. 5, Chung-Hsin Road, Chia-Tai Industrial Zone, Tai-Pao City, Chia-Yi, Taiwan, R.O.C.

0.6. Location of the statutory plate: R, x1147, y126, z660 Vehicle identification number: RK3SP03105A000001

0.7. Location of the vehicle identification number on the chassis: R, x100, y87, z455 Conforms in all respects to the type described in EC type-approval - EC type-approval number: e4*2002/24*1151*00 - Dated: The vehicle can be permanently registered without requiring any further approvals, for driving on the right/left and for using metric/imperial units for the speedometer.

Chia-Yi, Taiwan, R.O.C. (Place) (Date)

(Signature) (Position)

mooiweer

Rond stempel

Additional Information

1. Number of axles: 2 and wheels: 4

3. Wheel base: 1270 mm

6.1. Length: 1825 mm

7.1. Width: 1230 mm

8. Height: 1140 mm

12.1. Mass of the vehicle (with bodywork) in running order: 221 kg

12.2. Unladen mass of the vehicle: 211 kg

14.1. Technically permissible maximum laden mass: 371 kg

14.2. Distribution of this mass among the axles:

1. 152 kg 2. 219 kg

14.3. Technically permissible mass on each axle:

1. 152 kg 2. 219 kg

17. Maximum mass of trailer: N.A.

(brake):……………….kg (unbraked):……………kg

19.1. Maximum vertical load at the coupling point for a trailer: N.A.

20. Engine manufacturer: Access Motor Co., Ltd.

21. Engine type as marked on the engine: E10

21.2. Engine number: E10R000001

22. Working principle: electric/spark ignition/compression ignition, four/two stroke

23. Number and arrangement of cylinders: One, vertical

24. Cylinder capacity: 249.4 cm3

25. Fuel: P

26. Maximum net power or maximum continuous rated power as applicable: 12.9 kW at 7000 min-1

26.1. Ratio: maximum net power or maximum continuous rated power/mass of the vehicle in running order: 0.058 kW/kg

28. Gearbox (type): A(automatic)

29. Gear ratio: CVT GEARBOX CHAIN

Minimum Maximum FORWARD REVERSE RATIO 1st gear D gear

1: 2.348 1: 0.780 1: 3.858 1: 4.507 1: 9.380 1: 2.667

32. Tyre size designation: Axle 1: 21×7-10 Axle 2: 20×11-9 or 20×11-10

mooiweer

Rond stempel

37. Body: No

41. Number and configuration of doors: N.A.

42.1. Number and position of seats: 2, r1: 1C, r2: 1C

43.1. Approval mark of coupling device, if fitted: N.A.

44. Maximum speed: 85 km/h

45. Sound level: In accordance with 97/24/EC Chapter 9, amendment 2005/30/EC Stationary: 82 dB(A) at engine speed: 3500 min-1 Drive-by: 79 dB(A)

46. Exhaust emissions: In accordance with 97/24/EC Chapter 5, amendment 2005/30/EC, stage 2003 Type I test: CO: 2.203 g/km, HC: 0.625 g/km, NOx: 0.181 g/km, HC+NOx: -- Type II test: for motorcycles and tricycles: CO: 0.071 % Visible air pollution caused by an engine with compression ignition: N.A.

- corrected value of absorption coefficient: N.A.

47. Fiscal power or national code number(s):

Italy: France: Spain: Belgium: Germany: Luxembourg: Denmark: Netherlands: Greece: United Kingdom: Irland: Portugal: Austria: Sweden: Finland: Czech Republic: Estonia: Cyprus: Latvia: Lithuania: Hungary: Malta: Poland: Slovenia: Slovakia:

50. Remarks:

51. Exemptions:

mooiweer

Rond stempel

mooiweer

Rond stempel

TÜV Kraftfahrt GmbH TÜV Rheinland Group Accreditation: RDW-99050014-02

Test Report No.: 84-2002/24-00523/06

Manufacturer : Type :

Access Motor Co., Ltd. SP250

TÜV Kraftfahrt GmbH Technologiezentrum Verkehrssicherheit 77-523e6.rdw Page 1 TÜV Rheinland Group Typprüfstelle Fahrzeuge/Fahrzeugteile Am Grauen Stein, D-51105 Köln (Poll)

T E S T R E P O R T

according to Council Directive on the approximation of the laws of the Member States relating to the

Type-approval of two or three-wheel motor vehicles

No.: 2002/24/EC

including all amendments until

No.: 2005/30/EC

Previously granted

EC-system type approval : --

Structure of report : 0. General information 1. Test object(s) and general test information 2. Test minutes 3. Remark concerning tested object(s) 4. Appendices 5. Statement of conformity


Test Report No.: 84-2002/24-00523/06




0. General information

0.1. Trademark or trade name of

the vehicle : Access

0.2. Manufacturer’s name for the type of the vehicle

: SP250

0.3. Name and address of the manufacturer


0.4. Name and address of the manufacturer’s authorized representative

: Not applicable

0.5. No. of information document date of issue date of last amendment

:::

SP250-2002/24-00 May 10, 2006 --


Test Report No.: 84-2002/24-00523/06




1. Test object(s) and general test information

1.1. Test object(s)

1.1.1 Identification no. : RK3SP03105A000004, Engine No. *E10R000010*

Variant(s) : Not applicable

Version(s) : SP250-S

Sort / category : Quadricycles / L7e

1.2. General test information

1.2.1 Order issued by (if different from manufacturer)

: --

1.2.2 Test object received on : --

1.2.3 Test date : March 28 to May 5, 2006

1.2.4 Test site : Tai-Bao, Sha-Lu, Lung-Tan and Chutung / Taiwan

1.2.5 Remark : The results of the test refer exclusively to the object(s) mentioned under point 1.1. of this report.


Test Report No.: 84-2002/24-00523/06




2. Test minutes

2.1. Test facilities : The test facilities used are in compliance with the

requirements of the directive.

2.2. Test results : The vehicle type has been tested according to the amendments mentioned in appendix 0.

See Appendix 1.

2.3. Variants and components



3. Remarks concerning tested object(s)

All versions of the vehicle type as stated in the information document are covered with the tested vehicle version(s) and test object(s) respectively.


Test Report No.: 84-2002/24-00523/06




List of modifications Appendix 0

Correction of : --

Modification of : --

Addition of : --

Deletion of : --


Test Report No.: 84-2002/24-00523/06




Test minutes of the frame directive Appendix 1

1. General

1.1. Make : Access

1.2. Type : SP250



1.3. Name and address of manufacturer : Access Motor Co., Ltd. 5, Chung-Hsin Road, Chia-Tai Industrial Zone, Tai-Pao City, Chia-Yi, Taiwan, R.O.C.

1.4. Name and address of manufacturer’s authorized representative

: Not applicable

2. General arrangement of vehicle

2.1. Category of vehicle : L7e

2.2. Maximum design speed : 85 km/h according to SD 95/1/EC, amendment 2002/41/EC

Conformity checks : Requirements fulfilled

Approval number : Not applicable

2.3. Wheels

2.3.1 Number : 4

2.3.2 Symmetrical or asymmetrical configuration

: Not applicable

2.4. Frame layout diagram : See drawing No. 71000-A03-H00


Test Report No.: 84-2002/24-00523/06




3. Masses and dimensions : According to SD 93/93/EEC, amendment

2004/86/EC



3.1. Mass of vehicle in running order : See Information Document SP250-2002/24-00, 2.1.

3.1.1 Distribution of that mass between the axles

: See Information Document SP250-2002/24-00, 2.1.1.

3.2. Mass of vehicle in running order together with rider

: See Information Document SP250-2002/24-00, 2.2.

3.2.1 Distribution of that mass between the axles


3.3. Maximum technically permissible mass declared by the manufacturer

: See Information Document SP250-2002/24-00, 2.3.

3.3.1 Division of that mass between the axles


3.3.2 Maximum technically permissible mass on the axles


3.4. Vehicle length : 1825 mm

3.5. Vehicle width : 1230 mm

3.6. Vehicle height : 1140 mm


Test Report No.: 84-2002/24-00523/06




4. Engine

4.1. Manufacturer of engine : See Information Document SP250-2002/24-00, 3.0.

4.2. Make : See Information Document SP250-2002/24-00, 3.1.

4.3. Type : E10

4.4. Spark- or compression-ignition engine : Spark-ignition / compression ignition engine

4.4.1 Operating cycle : See Information Document SP250-2002/24-00, 3.2.1.1.

4.4.2 Cooling system : See Information Document SP250-2002/24-00, 3.2.7.

4.4.3 Lubrication system : Injection into induction system

4.4.4 Number, arrangement and firing order of cylinders

: See Information Document SP250-2002/24-00, 3.2.1.2.

4.4.5 Bore, stroke and cylinder capacity : See Information Document SP250-2002/24-00, 3.2.1.2.1. - 3.2.1.3.

4.4.6 Full drawing of induction system : See Information Document SP250-2002/24-00, 3.2.8.3.

4.4.7 Compression ratio : See Information Document SP250-2002/24-00, 3.2.1.4.

4.4.8 Maximum net power and maximum net torque

: See Information Document SP250-2002/24-00, 3.2.1.7. - 3.2.1.8., according to SD 95/1/EC, amendment 2002/41/EC

Conformity checks : Requirements fulfilled, for test results see appendix 3


4.4.9 Fuel tank : According to SD 97/24/EC Chapter 6, amendment 2005/30/EC See Information Document SP250-2002/24-00, 3.2.3.


Test Report No.: 84-2002/24-00523/06





Approval number (installation) : Not applicable

Approval number (component) : See Information Document SP250-2002/24-00, 3.2.3.4.

4.4.10 Fuel supply : See Information Document SP250-2002/24-00, 3.2.4.

10.15 Anti-tampering measures for mopeds and motorcycles

: Not applicable

Conformity checks : Not applicable


4.4.11 Electrical system : See Information Document SP250-2002/24-00, 3.2.5.

4.4.12 Generator : See Information Document SP250-2002/24-00, 3.2.5.2.

10.3. Electromagnetic compatibility : According to SD 97/24/EC Chapter 8, amendment 2005/30/EC see Information Document SP250-2002/24-00, 3.2.6.8.



10.4. Sound level and exhaust system : According to SD 97/24/EC Chapter 9, amendment 2005/30/EC



10.4.1 Make of exhaust system : See Information Document SP250-2002/24-00, 3.2.9.

10.4.2 Type of exhaust system : One main muffler


Test Report No.: 84-2002/24-00523/06




10.4.3 Sound level

Stationary noise, dB(A) at min-1 : 82 / 3500

Noise when in motion in dB(A) : 79

4.4.13 Anti-pollution devices : According to SD 97/24/EC Chapter 5, amendment 2005/30/EC



4.5. Electric traction motor : Not applicable

5. Transmission

Type : Manual / automatic

2.2. Maximum design speed : According to SD 95/1/EC, amendment 2002/41/EC see Information Document SP250-2002/24-00, 4.6.



10.12. Speedometer : According to SD 2000/7/EC, see Information Document SP250-2002/24-00, 4.7

6. Tyres : According to SD 97/24/EC Chapter 1, amendment 2005/30/EC see Information Document SP250-2002/24-00, 5.2.



Tyres of any tyre manufacturer may be fitted provided that they are of the same dimensions, E/e-mark approved according to ECE-R75 or 97/24/EC, chapter 1 and of a load index of 19 (front tyre) / 32 (rear tyre) or more and a speed index of G (all tyres) or more.


Test Report No.: 84-2002/24-00523/06




7. Braking system : According to SD 93/14/EEC, see Information Document SP250-2002/24-00, 7.



8. Installation of lighting and light-signalling devices

: According to SD 93/92/EEC, amendment 2000/73/EC See Information Document SP250-2002/24-00, 8.2.



9. Lighting and light-signalling devices : According to SD 97/24/EC Chapter 2, amendment 2005/30/EC see Information Document SP250-2002/24-00, 8.1.


Approval number : See Information Document SP250-2002/24-00, 8.1.

10. Miscellaneous

10.16. Coupling devices and their attachment : Not applicable

10.13. Identification of controls, tell-tales and indicators

: According to SD 93/29/EEC, amendment 2000/74/EC see Information Document SP250-2002/24-00, 9.2.



10.14. Statutory inscriptions : According to SD 93/34/EEC, amendment 1999/25/EC see Information Document SP250-2002/24-00, 9.3.




Test Report No.: 84-2002/24-00523/06




Location of statutory plate : At the front side of the front frame under radiator

10.8. Devices to prevent unauthorised use : According to SD 93/33/EEC, amendment 1999/23/EC See Information Document SP250-2002/24-00, 9.4.



10.1. Audible warning device : According to SD 93/30/EEC, see Information Document SP250-2002/24-00, 9.5.


Approval number, annex II (installation)

: Not applicable

Approval number, annex I (component)


10.2. Location of rear registration plate : According to SD 93/94/EEC, amendment 1999/26/EC See Information Document SP250-2002/24-00, 9.6.



10.6. External projections : According to SD 97/24/EC Chapter 3, amendment 2005/30/EC



B. Information relating solely to two-wheel mopeds and motorcycles

Not applicable

C. Information relating solely to three-wheel mopeds, motor tricycles and quadricycles


Test Report No.: 84-2002/24-00523/06




10.9. Windows : Without (vehicle without bodywork)

10.5. Rear-view mirrors : According to SD 97/24/EC Chapter 4, amendment 2005/30/EC See Information Document SP250-2002/24-00, C 2.6.


Approval number (installation) : Not applicable

Approval number (component) : See Information Document SP250-2002/24-00, C 2.6.2.

10.11. Anchorages for safety belts : Without (vehicle without bodywork)


Test Report No.: 84-2002/24-00523/06




Test minutes of braking system Appendix 2

0. Test condition

0.1. Test date : April 26, 2006

0.2. Test site : Tai-Bao / Taiwan

1. Test facilities : The test equipment used was in compliance with the requirements of the directive.

2. Test object(s)

2.1. Type : SP250 Variant : -- Version : SP250-S

2.2. Technically permissible mass on axles

Axle 1 [kg]

: 152 kg

Axle 2 [kg] : 219 kg

2.3. Load conditions of the vehicle during the test

Unladen Laden

Axle 1 [kg] 138 152

Axle 2 [kg] 158 219

Total [kg] 296 371

2.4. Number and arrangement of the axles : 2 axles


Test Report No.: 84-2002/24-00523/06




2.5. Brief description of the service

braking device

Combined (service brake) : Foot lever, manually operated, mechanical and hydraulic transfer, disc brakes

Front (secondary brake) : Hand lever, manually operated, mechanical and hydraulic transfer, two disc brakes

Manufacturer of the brake system : Access Motor Co., Ltd.

Manufacturer of brake pad : Horng Fuu Industrial Co., Ltd.

Rear (secondary brake) : Hand lever, manually operated, mechanical and hydraulic transfer, single disc brake

Manufacturer of the brake system : Access Motor Co., Ltd.

Manufacturer of brake pad : Horng Fuu Industrial Co., Ltd.

2.6. Other devices (anti-lock, …etc.) : Parking brake device: Independent hand lever, purely mechanical device acting on the rear axle


Test Report No.: 84-2002/24-00523/06




3. Test results

3.1. Type-0 test, with engine disconnected / automatic transmission under normal driving condition

Test speed Measured performance

Measured force applied to control

(km/h) (m/s2) (N) Unladen, dry brakes

Combined service brake 60 7.2 230

Secondary brake axle 1 60 6.0 144

Secondary brake axle 2 60 4.2 133 Laden, dry brakes





Test Report No.: 84-2002/24-00523/06




Reference tests for wet brake : Not applicable



(km/h) (m/s2) (N) Unladen, dry brakes Service brake axle 1

between 0.5 and 1s / max. -- -- --

Service brake axle 2 between 0.5 and 1s / max. -- -- --

Laden, dry brakes Service brake axle 1



Tests for wet brake :



(km/h) (m/s2) (N) Unladen, wet brakes Service brake axle 1



laden, wet brakes Service brake axle 1




Test Report No.: 84-2002/24-00523/06




3.2. Type-0 test, engine connected : Not applicable


Measured force applied to the controls

(km/h) (m/s2) (N) Unladen, dry brakes Combined braking device

applied

30% Vmax. 26 8.5 < 500

55% Vmax. (additional test) 47 8.1 < 500

80% Vmax. (max. 160 km/h) 68 7.8 < 500


Test Report No.: 84-2002/24-00523/06




3.3. Type-1 test, (fade test) : Not applicable

Distance between the initiation of two consecutive stops : 1000 m Number of braking : 10



(km/h) (m/s2) (N) Laden, dry brakes

Combined service brake 60 3.0 120 Type 1 test, with engine connected / automatic transmission under normal driving condition : Not applicable



(km/h) (m/s2) (N) Laden, dry brakes

Reference test Combined service brake 60 6.5 283


3.4. Parking brake test (if applicable) : The parking brake device is capable of holding the

laden vehicle stationary on an 18% up or down gradient.


Test Report No.: 84-2002/24-00523/06




Test minutes of max. engine power and torque Appendix 3

0. Test condition


0.2. Test site : Tai-Pao / Taiwan


2. Test vehicle(s)


2.2. Engine type / number : E10 / without, prototype

3. Engine performance

3.1. Test conditions

3.1.1 Pressures measured at maximum power

3.1.2 Barometric : 100.5 kPa

3.1.3 Water vapour pressure : 3.96 kPa

3.1.4 Exhaust (to be measured when the original induction systems are not used)

: --

3.1.5 Inlet depression at engine intake system (to be measured when the original induction systems are not used)

: --


Test Report No.: 84-2002/24-00523/06




3.1.6 Temperatures measured at maximum power of the engine

Intake air : 312 K

Outlet of the inlet intercooler : --

Cooling liquid

Engine cooling liquid outlet : 346 K

Reference point in case of air cooling : --

Oil in the oil sump : --

Fuel

Injector intake : --

Fuel-consumption measuring device : 308 K

Exhaust gas, measured at the point adjacent to the outlet flange(s) of the exhaust manifolds

: 1079 K

3.1.7 Characteristics of the dynamometer

Make : ARCOM s.r.l.

Type : FR-100

3.1.8 Fuel

For positive ignition engines operating on liquid fuel

Make : China Petroleum Corp.

Specification : Reference fuel according to Annex IV of 97/24/EC Chapter 5 amended by 2005/30/EC

Anti-knock additive (lead, etc.)

Type : Not applicable


Test Report No.: 84-2002/24-00523/06




Content mg/litre : Not applicable

Octane number

RON No. : 95.4

MON No. : 85.1

Relative density at 15 ° C at 4 ° C

::

0.75 --

Calorific value : Not applicable

3.1.9 Lubricant

Make : China Petroleum Corp.

Specifications : API SF/CD

SAE viscosity grade : 10W/50

3.1.10 Correction factor for mechanical efficiency of the transmission

Overall factor (n1*n2*n3*n4) : 1 *

Gear wheel (n1) : n.a.

Chain (n2) : n.a.

Belt (n3) : n.a.

Hydraulic coupling or converter (n4) : n.a.


Test Report No.: 84-2002/24-00523/06




Detailed results of measurement

engine speed min-1 2504 3003 3501 4000 4500 5003 5499 6000 6500 7002 7504 8000

rotation speed of dynamometer brake min-1 -- -- -- -- -- -- -- -- -- -- -- --

dynamometer brake load N -- -- -- -- -- -- -- -- -- -- -- --

torque measured at crankshaft Nm 17.70 19.60 19.70 19.20 18.40 18.30 18.90 18.70 17.30 16.30 14.10 13.00

power measured kW 4.70 6.20 7.20 8.10 8.70 9.60 10.90 11.80 11.80 12.00 11.10 10.90

barometric pressure kPa 100.5 100.5 100.5 100.4 100.5 100.5 100.6 100.5 100.6 100.5 100.5 100.5

inlet air temperature K 307 307 307 308 309 309 310 311 312 312 314 314

water vapour pressure kPa 3.66 3.69 3.69 3.69 3.71 3.79 3.78 3.78 3.88 3.96 3.85 3.87

atmosph. Correction factor -- 1.045 1.046 1.046 1.049 1.050 1.051 1.052 1.055 1.057 1.059 1.062 1.062

mechanical correction factor -- -- -- -- -- -- -- -- -- -- -- -- --

corrected net torque at crankshaft

Nm 18.50 20.50 20.61 20.14 19.32 19.23 19.88 19.73 18.29 17.26 14.97 13.81

corrected power kW 4.91 6.49 7.53 8.50 9.14 10.09 11.47 12.45 12.47 12.71 11.79 11.58

measured fuel flow (not corrected)

g/kWh 769 837 805 794 875 967 890 899 956 935 1033 1069

Engine temperature at the spark plug washer / engine coolant outlet

K 338 339 339 341 341 341 343 343 344 346 346 348

lubricating oil temperature at measuring point K 335 335 335 336 337 338 339 345 352 353 357 361

air temperature after pressure charger K -- -- -- -- -- -- -- -- -- -- -- --

exhaust temperature K 883 871 914 953 948 955 984 1001 1051 1079 1114 1110

air temperature downstream of the supercharger K -- -- -- -- -- -- -- -- -- -- -- --

pressure downstream of the supercharger kPa -- -- -- -- -- -- -- -- -- -- -- --

Maximum net power

: 12.71 kW at 7002 min-1

Maximum net torque

: 20.61 Nm at 3501 min-1


Test Report No.: 84-2002/24-00523/06




Test minutes of anti-pollution devices Appendix 4

0. Test condition


0.2. Test site : Chutung / Taiwan


1.1. Equivalent inertia mass - acc. to section 5.2.

: 280 kg

1.2. Absorbed power Pa - acc. to section 5.2.

: 1.17 kW

1.3. Method of setting according to : Annex II, Appendix 1, point 5.2 of the directive.

2. Test vehicle(s)

2.1. Type Variant Version

:::

SP250 -- SP250-S

2.2. Identification number : RK3SP03105A000004

2.3. Masses

2.3.1 Mass of vehicle in running order : 221 kg

2.3.2 Reference mass : 296 kg

2.3.3 Maximum mass of vehicle : 371 kg

2.4. Gear box

2.4.1 Transmission type : Manual / automatic

2.4.2 Number of gear ratios : 5 / not applicable


Test Report No.: 84-2002/24-00523/06




2.4.3 Gear ratio

First gear : -- Second gear : -- Third gear : -- Fourth gear : -- Fifth gear : --

Final drive ratio : 1: 2.667

Tyres Front Rear Dimensions 21×7-10 20×11-9 Dynamic rolling circumference -- 1596 mm

2.4.4 Check of performances referred to in

annex II, appendix 1, paragraph 3.1.5. to this regulation

: Not applicable

2.5. Tire pressure of the driven wheel on the dynamometer

: 35 kPa


Test Report No.: 84-2002/24-00523/06




3. Type I test : (Verifying the average emission of gaseous

pollutants in a congested urban area)

CO [g/km]

HC [g/km]

NOx [g/km]

1st measured value* 2.203 0.625 0.181

2nd measured value* -- -- --

3rd measured value* -- -- --

Mean value* 2.203 0.625 0.181

Test result* 2.203 0.625 0.181

limit value A (2003) 7.0 1.5 0.4

* Rounded value

4. Type II test : (Verifying the emission at idling speed and high idle)

Idling speed 1/min

CO (Vol %)

oil temperature (ºC)

1540 0.071 64 2190 0.058 65

5. Reference fuel No. : Reference fuel according to Annex IV of 97/24/EC

Chapter 5, amendment by 2005/30/EC


Test Report No.: 84-2002/24-00523/06




Test minutes of noise-measuring Appendix 6

0. Test condition

0.1. Test date : May 5, 2006

0.2. Test site : Lung-Tan / Taiwan


2. Test vehicle(s)



2. Engine

2.1. Manufacturer : Access Motor Co., Ltd.

2.2. Type : E10

2.3. Model : Four-stroke / two-stroke

2.4. Rated max. power (according to ...)

: 12.9 kW at 7000 min-1

(95/1/EC amendment 2002/41/EC)

2.5. Maximum design speed : 85 km/h

3. Transmission : Manual / automatic

4. Equipment

4.1. Exhaust silencer

Manufacturer or authorized representative

: Access Motor Co., Ltd.

Model : Expansion, absorption, reflection

EC type-approval number : --


Test Report No.: 84-2002/24-00523/06




Type : A03

In acc. with drawing no. : 12160-A03-H00

4.2. Air filter / Intake silencer

Manufacturer or authorized representative

: Access Motor Co., Ltd.

Model : Air filter, dry

EEC type-approval number

Type : A03

in acc. with drawing no. : 17300-E10-000 / 17320-E10-000

4.3. Tyre size

- front : 21×7-10

- rear : 20×11-9


Test Report No.: 84-2002/24-00523/06




5. Measurement

5.1. Sound level of vehicle in motion

5.1.1 Correction factor : Not applicable

Measurement result Left-hand side

dB(A) Right-hand side dB(A) Approach speed

1st measurement

79 78 50 km/h (automatic

transmission without manual override)

2nd measurement

79 78 50 km/h (automatic

transmission without manual override)

Test result 79 dB(A)/E

5.2. Sound level of stationary vehicle

Left dB(A)

Right dB(A) Engine speed min-1

1st measurement 82 -- 3500

2nd measurement 82 -- 3450

3rd measurement 82 -- 3480

Test result 82 dB(A)/E


Test Report No.: 84-2002/24-00523/06




Test minutes of speedometer Appendix 7

0. Test condition


0.2. Test site : Tai-Bao / Taiwan


2. Test vehicle(s)



3. Vehicle designed Vmax [km/h] : 85

4. Mass in running order [kg] : 221

5. Distribution [kg] axle 1 : 109

axle 2 : 112

6. Tyre dimensions axle 1 : 21×7-10

axle 2 : 20×11-9

6.1. Tyre pressure [kPa] axle 1 : 55

axle 2 : 55

7. Speedometer

7.1. Make(s) / type(s) : ACEWELL / ACE-3853 or KOSO / BC-SA

7.2. Speed indicated by : Digital


Test Report No.: 84-2002/24-00523/06




8. Measurement

8.1. Temp at speedometer (°C) [23±5 °C] : 28 °C

8.2. Test result Make: ACEWELL

Test No

Displayed speed “V1” (km/h)

True speed “V2” (km/h)

Error “V1-V2” (km/h)

Limit (km/h)

1 41 40 1 8.0 2 71 68 3 10.8

Make: KOSO

Test No

Displayed speed “V1” (km/h)

True speed “V2” (km/h)

Error “V1-V2” (km/h)

Limit (km/h)

1 42 40 2 8.0 2 73 68 5 10.8

Access Motor Co., Ltd. 5, Chung-Hsin Road, Chia-Tai Industrial Zone, Tai-Pao City, Chia-Yi, Taiwan, R.O.C. Tel: 886-5-2377870 Fax: 886-5-2377875 Issue date: May 10, 2006 Doc. No.: SP250-2002/24-00 Original Application

PAGE 1 / 20

2002/24/EC INFORMATION DOCUMENT

PART 1

A. INFORMATION RELATING JOINTLY TO MOPEDS, MOTOR CYCLES, MOTOR TRICYCLES AND QUADRICYCLES

0. General

0.1. Make : Access

0.2. Type : SP250 Variant : N/A Version : SP250-S

0.2.1. Commercial name : Access Motor, as option: SS250R, Hammel, Quadzilla, Bogart Patriot, Nexmotor, Tomahawk, Apollo, Spike

0.3. Means of type identification if stated on vehicle

: ???SP????????????

0.3.1. Location of that means of identification : On the right side of frame body, see drawing no: 71000-A03-H00

0.4. Vehicle category : L7e

0.5. Name and address of manufacturer Address


0.5.1. Name(s) and address(s) of assembly plants : Access Motor Co., Ltd. 5, Chung-Hsin Road, Chia-Tai Industrial Zone, Tai-Pao City, Chia-Yi, Taiwan, R.O.C.

0.6. Name and address of manufacturer‘s authorized representative, if any

: N/A

0.7. Location and method of affixing statutory inscriptions to the chassis

: Riveted on the right side of frame body, see drawing no: 71000-A03-H00

0.7.1. The serial numbering of the type begins with No.

: RK3SP03105A000001

0.8. Position and method of affixing the component type-approval mark for components and separate technical units

: Components approval marks are fixed by mold , engraving of sticker to the components.

mooiweer

Rond stempel


PAGE 2 / 20

1. General arrangement of vehicles

1.1. Photos and/or drawings of a typical vehicle : See drawing no: 70000-A03-H00

1.2. Dimensional drawing of the complete vehicle

: See drawing no: 70000-A03-H00

1.2.1. Wheelbase : 1270 mm

1.3. Number of axles and wheels : Two axles, two wheels on each axle

1.4. Position and arrangement of engine : Central and vertical

1.5. Number of seating positions : 2

1.6. Hand of drive – left or right : N/A

1.6.1. Vehicle is equipped to be driven in right-hand or left-hand rule of the road traffic

: Both

2. Masses

2.0. Unladen mass : 211 kg

2.1. Mass of vehicle in running order : 221 kg

2.1.1. Distribution of that mass between the axles : Front- 109 kg, rear- 112 kg

2.2. Mass of vehicle in running order, together with rider

: 296 kg

2.2.1. Distribution of that mass between the axles : Front- 138 kg, rear- 158 kg

2.3. Maximum technically permissible mass declared by the manufacturer

: 371 kg

2.3.1. Division of that mass between the axles : Front- 152 kg, rear- 219 kg

2.3.2. Maximum technically permissible mass on each of the axles

: Front- 152 kg, rear- 219 kg

2.4. Maximum hill-starting ability at the maximum technically permissible mass declared by the manufacturer

: 10°

2.5. Maximum tow-able mass : N/A

2.6. Maximum mass of the combination : N/A

3. Engine

3.0. Manufacturer : Access Motor Co., Ltd.

3.1. Make : Access

3.1.1. Type : E10

3.1.2. Location of engine number : Left side of the crankcase

3.2. Spark- or compression-ignition engine

3.2.1. Specific characteristics of the engine

3.2.1.1. Operating cycle : Spark ignition, four stroke

3.2.1.2. Number , arrangement and firing order of cylinders

: One, vertical

3.2.1.2.1. Bore : Ø71.0 mm

mooiweer

Rond stempel


PAGE 3 / 20

3.2.1.2.2. Stroke : 63.0 mm

3.2.1.3. Cylinder capacity : 249.4 cc

3.2.1.4. Compression ratio : 11.0± 0.1: 1

3.2.1.5. Drawings of cylinder head, piston(s), piston rings and cylinder(s)

: See drawing no: 12100-E10-H00, 12200-E10-H00, 13300-E10-000, 13310-E10-010~1, 13310-E10-010~2, 13310-E10-010~3

3.2.1.6. Idling speed min-1 : 1600± 100 min-1

3.2.1.7. Maximum net power output : 12.9 kw at 7000 min-1

3.2.1.8. Net maximum torque : 21.0 Nm at 3500 min-1

3.2.2. Fuel : Diesel/ petrol/ mixture/ LPG/ other

3.2.3. Fuel tank

3.2.3.1. Maximum capacity : 14.8± 0.2 L

3.2.3.2. Drawing of tank with indication of materials used

: See drawing no:12100-A03-H00

3.2.3.3. Diagram clearly indicating the position of the tank on the vehicle

: See drawing no:12100-A03-H00

3.2.3.4. Approval number of the fuel tank fitted : N/A

3.2.4. Fuel supply

3.2.4.1. Via carburetor(s) : Yes / no

3.2.4.1.1. Make(s) : Mikuni

3.2.4.1.2. Type(s) : BSR33, see drawing no: 16100-E10-H00

3.2.4.1.3. Number fitted : 1

3.2.4.1.4. Settings

3.2.4.1.4.1. Diffusers : Venturi, see drawing no: 16100-E10-H00

3.2.4.1.4.2. Level in float chamber : 31.5±0.5 mm

3.2.4.1.4.3. Mass of float : 10± 0,2 g

3.2.4.1.4.4. Float needle : ∅5 mm

3.2.4.1.4.5. Fuel curve as a function of the air flow and settings required in order to maintain that curve

: N/A

3.2.4.1.5. Cold-starting system: manual/automatic : Manual / automatic

3.2.4.1.5.1. Operating principle(s) : Enrich the air fuel mixture rate by using the choke mechanism to assist the cold starting. The choke is controlled by choke switch.

3.2.4.2. By fuel injection : Yes / no

3.2.4.2.1. Description of system : N/A

3.2.4.2.2. Operating principle direct / indirect / turbulence chamber injection

: N/A

3.2.4.2.3. Injection pump N/A

mooiweer

Rond stempel


PAGE 4 / 20

3.2.4.2.3.1. Make(s) : N/A

3.2.4.2.3.2. Type(s) : N/A

3.2.4.2.3.3. Maximum fuel flow rate mm3 / per stroke or cycle at a pump rotational speed of min-1 or characteristic diagram

: N/A

3.2.4.2.3.4. Injection advance : N/A

3.2.4.2.3.5. Injection advance curve : N/A

3.2.4.2.3.6. Calibration procedure: test bench/engine : N/A

3.2.4.2.4. Regulator N/A

3.2.4.2.4.1. Type : N/A

3.2.4.2.4.2. Cut-off point : N/A

3.2.4.2.4.2.1. Cut-off point under load : N/A

3.2.4.2.4.2.2. Cut-off point under no load : N/A

3.2.4.2.4.3. Idling speed : N/A

3.2.4.2.5. Injection pipework N/A

3.2.4.2.5.1. Length : N/A

3.2.4.2.5.2. Internal diameter : N/A

3.2.4.2.6. Injector(s)

either

N/A

3.2.4.2.6.1. Make(s) : N/A

3.2.4.2.6.2. Type(s) : N/A

3.2.4.2.6.3. Opening pressure or characteristic diagram : N/A

3.2.4.2.7. Cold starting system

Either

N/A

3.2.4.2.7.1. Make(s) : N/A

3.2.4.2.7.2. Type(s) : N/A

3.2.4.2.7.3. Description : N/A

3.2.4.2.8. Secondary starting device : N/A

3.2.4.2.8.1. Make(s) : N/A

3.2.4.2.8.2. Type(s) : N/A

3.2.4.2.8.3. Description of system : N/A

3.2.4.3. By fuel injection : Yes / no


3.2.4.3.2. Operating principle: injection into Induction manifold (single/ multiple point)/direct injection/ other(state which)

: N/A

3.2.4.3.2.1. Make(s) of the injection pump : N/A

3.2.4.3.2.2. Type(s) of the injection pump : N/A

mooiweer

Rond stempel


PAGE 5 / 20

3.2.4.3.3. Injectors: opening pressure

or characteristic diagram

: N/A

3.2.4.3.4. Injection advance : N/A

3.2.4.3.5. Cold-starting system N/A

3.2.4.3.5.1. Operating principle(s) : N/A

3.2.4.3.5.2. Operating/setting limits : N/A

3.2.4.4. Fuel pump : Yes / no

3.2.5. Electrical equipment

3.2.5.1. Nominal voltage : 12V, negative earth

3.2.5.2. Generator

3.2.5.2.1. Type : V55

3.2.5.2.2. Nominal power : 210± 5 W

3.2.6. Ignition

3.2.6.1. Make (s) : EYANG

3.2.6.2. Type(s) : 61115-A03-000

3.2.6.3. Operating principle : Condenser discharge ignition

3.2.6.4. Ignition advance curve or operating set point

: See drawing no: 61115-A03-000

3.2.6.5. Static timing : 5° before TDC, see drawing no: 61115-A03-000

3.2.6.6. Points gap : N/A

3.2.6.7. Dwell angle : N/A

3.2.6.8. Anti-radio interference system : Spark plug cap with resistor and resistor spark plug

3.2.6.8.1. Terminology and drawing of anti-radio interference equipment

: Spark plug: NGK R DPR7EA 9, see drawing no: 61109-A03-000

3.2.6.8.2. Indication of the nominal DC resistance value and, in the case of resistive ignition lead, statement of nominal resistance per metre

: Plug cap: 10± 1 kΩ, Spark plug: 5± 0.5 kΩ

3.2.7. Cooling system : Liquid / air

3.2.7.1. Nominal setting for the engine-temperature control device

: Control valve opened when water is more than 75°C

3.2.7.2. Liquid

3.2.7.2.1. Nature of liquid : Long life coolant additive: 50%, water: 50%

3.2.7.2.2. Circulating pump(s) : Yes / no

3.2.7.3. Air

3.2.7.3.1. Blower : Yes / no

3.2.8. Induction system

3.2.8.1. Supercharging : Yes / no

mooiweer

Rond stempel

mooiweer

Rond stempel


PAGE 6 / 20

3.2.8.1.1. Make(s) : N/A

3.2.8.1.2. Type(s) : N/A


3.2.8.2. Intercooler : With / without

3.2.8.3. Description and drawings of induction pipework and accessories (plenum chamber, heating device, additional air intakes, etc.)

: See drawing no: 16410-E10-010, 12166-A03-000

3.2.8.3.1. Description of induction manifold : See drawing no: 16410-E10-010

3.2.8.3.2. Air filter, drawings : See drawing no: 17300-E10-000

3.2.8.3.2.1. Make(s) : LIAN WANG

3.2.8.3.2.2. Type(s) : A03 (marking: 17300-E10-000)

3.2.8.3.3. Inlet silencer, drawings : See drawing no: 17320-E10-000

3.2.8.3.3.1 Make(s) : LIAN WANG

3.2.8.3.3.2 Type(s) : A03

3.2.9. Exhaust system

3.2.9.1. Drawing of complete exhaust system : See drawing no: 12160-A03-H00

3.2.10. Minimum cross-section of the inlet and exhaust ports

: See drawing no: 12200-E10-H00

3.2.11. Induction system or equivalent data

3.2.11.1. Maximum, valve lift, opening and closing angles in relation to the dead centres, or data concerning the settings of other possible systems

: See drawing no.25100-E10-H00

3.2.11.2. Reference and/or setting ranges : 0.0487~ 0.0787 mm

3.2.12. Measures taken against air pollution

3.2.12.1. Device for recycling crankcase gases, solely in the case of four-stroke engines

: See drawing no: 11350-E10-H10

3.2.12.2. Additional anti-pollution devices : Catalyst

3.2.12.2.1. Catalytic converter : Yes / no

3.2.12.2.1.1. Number of catalytic converters and elements

: 1

3.2.12.2.1.2. Dimensions, shape and volume of the catalytic converter(s)

: See drawing no.12165-A01-000

3.2.12.2.1.3. Type of catalytic action : 3 way catalytic converter

mooiweer

Rond stempel


PAGE 7 / 20

3.2.12.2.1.4. Total charge of precious metal : See drawing no.12165-A01-000

3.2.12.2.1.5. Relative concentration : See drawing no.12165-A01-000

3.2.12.2.1.6. Substrtae (structure and material) : See drawing no.12165-A01-000

3.2.12.2.1.7. Cell density : 100 cpsi

3.2.12.2.1.8. Type of casing for the catalytic converter(s) : See drawing no.12165-A01-000

3.2.12.2.1.9. Location of the catalytic converter(s) : See drawing no: 12160-A03-H00

3.2.12.2.2. Oxygen sensor : Yes / no

3.2.12.2.2.1. Type : N/A

3.2.12.2.2.2. Location : N/A

3.2.12.2.2.3. Control range : N/A

3.2.12.2.3. Air injection : Yes / no

3.2.12.2.3.1. Type : N/A

3.2.12.2.4. Exhaust gas recirculation : Yes / no

3.2.12.2.4.1. Characteristics : N/A

3.2.12.2.5.. Other systems : N/A

3.2.13. Location of the coefficient of absorption symbol

: N/A

3.3. Electric traction motor

3.3.1. Type : N/A

3.3.1.1. Maximum continuous rated power : N/A

3.3.1.2. Operating voltage : N/A

3.3.2. Battery

3.3.2.1. Number of cells : N/A

3.3.2.2. Mass : N/A

3.3.2.3. Capacity : N/A

3.3.2.4. Location : N/A

3.4. Other motors or combinations of motors : N/A

3.5. Cooling system temperatures permitted by

the manufacturer

3.5.1. Liquid cooling

3.5.1.1. Maximum temperature at outlet : 90 °C

3.5.2. Air cooling : N/A

3.5.2.1. Reference point : N/A

3.5.2.2. Maximum temperature at reference point : N/A

3.6. Lubrication system

3.6.1. Description of system : Lubricant oil splashed to the cylinder camshaft by oil pump

mooiweer

Rond stempel


PAGE 8 / 20

3.6.1.1. Location of oil reservoir : Below the crankcase

3.6.1.2. Feed system : Oil pump

3.6.2. Lubricant mixed with the fuel

3.6.2.1. Percentage : N/A

3.6.3. Oil cooler : Yes / no

3.6.3.1. Drawing(s) : N/A

3.6.3.1.1. Make(s) : N/A

3.6.3.1.2. Type(s) : N/A

4. Transmission

4.1. Diagram of transmission system : See drawing no: 22100-E10-H00

4.2. Type : CVT

4.3. Clutch : Centrifugal

4.4. Gearbox

4.4.1. Type : Automatic / manual

4.4.2. Method of selection: by hand/foot : By hand / foot

mooiweer

Rond stempel


PAGE 9 / 20

4.5. Gear ratios

N R1 R2 R3 Rt

Minimum continuously variable transmission

1 2 …

Maximum continuously variable transmission

Reverse gear

1:1

1:1

1:1

1st gear: 1:9.059D gear: 1:10.582

1st gear: 1:3.009D gear: 1:3.515

1:22.024

1:2.667

1:2.667

1:2.667

1st gear: 1:24.159 D gear: 1:28.223

1st gear: 1:8.026 D gear: 1:9.376

1:58.739

N : gear ratio R1 : primary ratio (ratio of engine speed to rotational speed of primary gearbox shaft). R2 : secondary ratio (ratio of rotational speed of primary shaft to rotational speed of secondary shaft in gearbox). R3 : final drive ratio (ratio of rotational speed of gearbox output shaft to rotational speed of driven wheels). Rt : overall ratio

4.5.1. Brief description of the electrical and/or electronic components used in the transmission

: N/A

4.6. Maximum speed of vehicle and gear in which it is reached

: 85 km/h

4.7. Speedometer

4.7.1. Make(s) : ACEWELL, as option: KOSO

4.7.2. Type(s) : ACE-3853 (ACEWELL), BC-SA (KOSO)

4.7.3. Photographs and/or drawings of the complete system

:

See drawing no: 63300-A03-000 (ACEWELL), 63300-A03-010 (KOSO), 62120-A03-H00

4.7.4. speed range displayed : ACEWELL: 0~ 300 km/h KOSO: 0~ 199 km/h

mooiweer

Rond stempel


PAGE 10 / 20

4.7.5. Tolerance of the measuring mechanism of the speedometer

: ACEWELL

km/h 40 60

Tolerance 0~ +2.5% 0~ +5%

Tolerance Range

0~ 1.0 km/h 0~ 3.0 km/h

KOSO

km/h 40 60

Tolerance 0~ +5% 0~ +8.3%

Tolerance Range

0~ 2.0 km/h 0~ 5 km/h

4.7.6. Technical constant of the speedometer : Setting parameter: 1676

4.7.7. Method of operation and description of the drive mechanism

: Magnetic detect, digital display with back-lighting

4.7.8. Overall transmission ratio of the drive mechanism

: N/A

5. Suspension

5.1. Drawing of suspension arrangement : See drawing no: 70000-A03-H00

5.1.1. Brief description of the electrical and/or electronic components used in the suspension

: N/A

5.2. Tyres (category, dimensions and maximum loading) and rims (standard type)

: Front Category Special Normal Size 21×7-10 21×7-10 Max load 92.5 kg 92.5 kg Rim 5.5×10 5.5×10

Rear

Category Normal Special Normal Size 20×11-9 20×11-9 20×11-10 Max load 132 kg 132 kg 128 kg Rim 8×9 8×9 8×10

5.2.1. Nominal rolling circumference : Front- 1676 mm, rear- 1596 mm

5.2.2. Tyre pressures recommended by the manufacturer

: 35 kPa

5.2.3. Tyre/ wheel combinations : Front- 21×7-10/ 5.5×10 Rear- 20×11-9/ 8×9 or 20×11-10/ 8×10

5.2.4. Minimum-speed category symbol compatible with the theoretical maximum design speed of the vehicle

: G

5.2.5. Minimum load-capacity index with the maximum load on each tyre

: Front- 19, rear- 32

5.2.6. Categories of use compatible for the vehicle : Front and rear- normal or special

mooiweer

Rond stempel


PAGE 11 / 20

6. Steering

6.1. steering gear and control

6.1.1. Type of gear : Handle bar on the front shaft steering

6.1.2. Brief description of the electrical and/or electronic components used in the steering system

: N/A

7. Braking

7.1. Diagram of braking devices : See drawing no.31115-A03-H00

7.2. Front and rear brakes, disc and/or drum : Front and rear- disc

7.2.1. Make(s) : Horng Fuu Industrial Co.,Ltd

7.2.2. Type(s) : Front: 31335-A03-000 (RH), 31336-A03-000 (LH) Rear: 30360-A03-000

7.3. Drawing of parts of the brake system

7.3.1. Shoes and/or pads : N/A

7.3.2. Linings and/or pads : See drawing no: 31337-A03-000~1, 31337-A03-000~2

7.3.3. Brake levers and/or pedals : Brake levers: see drawing no: 31405-A03-000、31460-A03-000 Brake pedal: see drawing no: 31408-A03-000

7.3.4. Hydraulic reservoirs : See drawing no: 31405-A03-000, 31460-A03-000, 31406-A03-000

7.4. Other devices: drawing and description : Mechanical parking brake device acting on the rear brake, See drawing no. 31115-A03-H00, 31470-A03-000

7.5. Brief description of the electrical and/or electronic components used in the braking system

: N/A

8. Lighting and light-signalling devices

Trade Mark Type Quantity/ Color Tell Tale Approval No. Remark

Driving lamp JUTE JUTE A013 1 / White E9-113R-001307 Max. 35.2 lux

Passing lamp JUTE JUTE A013 1 / White N.A. E9-113R-001307 --

Front position lamp

JUTE JUTE 0003-P 1 / White Illumination

of speedometer

E4-50R-000514 --

Front direction indicator

JUTE JUTE W016-W 2 / Amber

E9-50R-001272 --

Rear direction Indicator

JUTE JUTE SAF-MR 2 / Amber

E9-50R-001033 --

mooiweer

Rond stempel


PAGE 12 / 20

Rear position Lamp

JUTE JUTE 0002-T 1 / Red Illumination

of speedometer

E4-50R-000513 --

Stop lamp JUTE JUTE 0002-T 1 / Red N.A. E4-50R-000513 --

License Plate illuminator

JUTE JUTE 0002-T 1 / White N.A. E4-50R-000513 --

Rear retro reflector

JUTE 9605 JUTE 9605 2 / Red N.A. E13*03R00*03R02*0279*01 --

8.2. Diagram showing the location of the lighting and light-signalling devices

: See drawing no.70000-A03-H00

8.3. Hazard warning lamps : Yes

8.4. Additional requirements relating to special vehicles

: N/A

8.5. Brief description of the electrical and/or electronic components used in the lighting system and in the light-signalling system

: N/A

9. Equipment

9.1. Coupling devices

9.1.1. Type: hook/ring/other : N/A

9.1.2. Photographs and/ or drawing showing the position and the construction of the coupling devices

: N/A

9.2. Arrangement and identification of controls, tell-tales and indicators

9.2.1. Photographs and/or drawings of the arrangement of the symbols, controls, tell-tales and indicators

: See drawing no: 61101-A03-000, 63300-A03-000, 63300-A03-010

9.3. Statutory inscriptions

9.3.1. Photographs and/or drawings showing the location of the statutory inscriptions and the chassis number

: See drawing no. 71000-A03-H00

9.3.2. Photographs and/or drawings showing the official part of the inscriptions

: See drawing no: 71237-A03-000

9.3.3. Photographs and/or drawings of the chassis number


9.4. Device(s) to protect against unauthorized use

9.4.1. Type of device(s) : Type 1

9.4.2. Summary description of device(s)used : Steering shaft is locked to the frame body by a lock pin, See drawing no: 70000-A03-H00

9.5. Audible warning device(s)

9.5.1 Summary description of device(s) used and : One electromagnetic DC horn

mooiweer

Rond stempel


PAGE 13 / 20

9.5.2. Make(s) : Knight Horn

9.5.3. Type(s) : KMG-80E

9.5.4. Type-approval mark : E13-II-000036

9.5.5. Drawing(s) showing the location of the audible warning device(s) in relation to the structure of the vehicle


9.5.6. Details of the method of attachment, including the part of the vehicle structure to which the audible warning device(s) is (are) attached


9.6. Location of rear registration plate : See drawing no: 70000-A03-H00

9.6.1. Inclination of plane in relation to the vertical

: 29°

B. INFORMATION RELATING SOLELY TO TWO-WHEEL MOPEDS AND MOTORCYCLES Not applicable

C. INFORMATION RELATING SOLELY TO THREE-WHEEL MOPEDS, MOTOR TRICYCLES AND QUADRICYCLES

1. Dimensions and masses

1.1. Dimensions to be complied with when building unbodied chassis

1.1.1 Length : 1825 mm

1.1.2. Width : 1230 mm

1.1.3. Unladen height : 1140 mm

1.1.4. Front overhang : 255 mm

1.1.5. Rear overhang : 300 mm

1.1.6. Limit position for centre of gravity of bodied vehicle

: N/A

1.2. Masses 1.2.1. Maximum payload declared by

manufacturer : 75 kg

2. Equipment

2.1. Bodywork

2.1.1. Nature of bodywork : N/A

2.1.2. General dimensional arrangement drawing of inside

: N/A

2.1.3. General dimensional arrangement drawing of outside

: N/A

mooiweer

Rond stempel


PAGE 14 / 20

2.1.4. Materials and methods of manufacture : N/A

2.1.5. Passenger doors, locks and hinges : N/A

2.1.6. Configuration, dimensions, direction and maximum opening angle of doors

: N/A

2.1.7. Drawing of locks and hinges and their location in the doors

: N/A

2.1.8. Technical description of locks and hinges : N/A

2.2. Windscreen and other glazing

2.2.1. Windscreen

2.2.1.1. Materials used : N/A

2.2.2. Other glazing

2.2.2.1. Materials used : N/A

2.3. Windscreen wiper(s) : N/A

2.3.1. Detailed technical description : N/A

2.4. windscreen washer(s) : N/A

2.4.1. Detailed technical description

: N/A

2.5. Defrosting and demisting : N/A

2.5.1. Detailed technical description : N/A

2.6. Rear-view mirror(s)

2.6.1. Make : FU

2.6.2. Type-approval mark : L-E11-001094

2.6.3. Variant : N/A

2.6.4. Drawing(s) showing the location of the rear-view mirror(s) in relation to the structure of the vehicle


2.6.5. Detailed information on the method of attachment, including that part of the structure of the vehicle to which the rear-view mirror is attached

: Mirrors are mounted on the handle bar by using screws

2.7. Seats

2.7.1. Number : 2

2.7.2. Location : Center of vehicle

2.7.3. Coordinates or drawing of the R point

2.7.3.1. Driving seat : N/A

2.7.3.2. Other seats : N/A

2.7.4. Intended seat-back inclination : N/A



mooiweer

Rond stempel


PAGE 15 / 20

2.7.5. Seat adjustment range, where appropriate



2.8. Passenger-compartment heating system

2.8.1. Summary description of type of vehicle in respect of the heating system if this uses heat from the liquid engine coolant

: N/A

2.8.2. Detailed description of the type of the vehicle in respect of the heating system if this uses the cooling air or exhaust gases as a heat source, including

: N/A

2.8.2.1. An overall drawing of the heating system giving its location on the vehicle

: N/A

2.8.2.2. An overall drawing of the heat exchanger used in systems utilizing the heat from the exhaust gases, or of the parts where that exchange takes place

: N/A

2.8.2.3. A sectional drawing of the heat exchanger or parts where heat exchange takes place, together with a statement of the wall thickness, of the materials used and the characteristics of their surface

: N/A

2.8.2.4. Specifications regarding the method of manufacture and technical data relating to other major components of the heating system, such as the fan

: N/A

2.9. Safety belts

2.9.1. Number and location of safety belts, together with a reference to the seats where that type of equipment may be installed

: N/A

2.10. Anchorages

2.10.1. Number and location of the anchorages : N/A

2.10.2. Photographs and/or drawings of the bodywork showing the true, effective location and dimensions of the anchorages, together with an indication of the R-point position

: N/A

2.10.3. Drawings of the anchorages and the parts of the structure of the vehicle to which they are attached

: N/A

2.10.4. Designation of the types of belts(*) authorized for attachment to the anchorages on the vehicle

: N/A

mooiweer

Rond stempel


PAGE 16 / 20

2.10.5. Description of a specific type of belt, one anchorage of which is attached to the seat back-rest or incorporates an energy-dissipation device

: N/A

mooiweer

Rond stempel


PAGE 17 / 20

PART 2 SEPARATE DIRECTIVE APPROVAL NUMBERS

The following information shall be supplied on the vehicle to be type approved with regard to existing system,

separate technical unit or component approvals(*):

Heading No

Separate Directive No

Subject Approval No (1) Extension date

Variants and

versions covered

18 95/1/EC Maximum torque and maximum net power of engine

-- -- --

19

97/24/EC (C7) Anti-tampering measures for mopeds and motorcycles

-- -- --

20 97/24/EC (C6) Fuel tank -- -- --

25 95/1/EC Maximum design speed of vehicle -- -- --

26 93/93/EEC Masses and dimensions -- -- --

27 97/24/EC (C10) Trailer coupling devices

-- -- --

28 97/24/EC (C5) Anti-air pollution measures -- -- --

29 97/24/EC (C1) Tyres Front: E11-54R-001815 or E4-75R-0003498 Rear: E4-75R-0003455 or E11-54R-001816 or E4-75R-0003331

-- --

31 93/14/EEC Braking system -- -- --

32 93/92/EEC Installation of lighting and light-signalling devices on the vehicle

-- -- --

mooiweer

Rond stempel


PAGE 18 / 20

Heading No

Separate Directive No

Subject Approval No(1) Extension date

Variants and

versions covered

33 97/24/EC (C2) Lighting and light-signalling devices

Head lamp (high & low): E9-113R-001307 Front position lamp: E4-50R-000514 Rear position and stop lamp, rear registration lamp: E4-50R-000513, ext.01 Front direction indicator: E9-50R-001272 Rear direction indicator: E9-50R-001033 Rear retro reflector: E13*03R00*03R02*0279*01

--

--

30 Sep. 2005

--

--

28 Nov. 1997

--

--

--

--

--

Ver. B

34 93/30/EEC Audible warning device E13*28R00*28R00*0036*00 -- --

35 93/94/EC Position for the mounting of rear registration plate

-- -- --

36 97/24/EC (C8) Electromagnetic compatibility

-- -- --

37 97/24/EC (C9) Sound level and exhaust system

-- -- --

38 97/24/EC (C4) Rear-view mirror(s) E11-81R-001094 -- --

39 97/24/EC (C3) External projections -- -- --

40 93/31/EEC Stand (except in the case of vehicles having three or more wheels)

-- -- --

41 93/33/EEC Devices to prevent unauthorized use of the vehicle

-- -- --

42 97/24/EC (C12) Windows; windscreen wipers; windscreen washers; and so on

-- -- --

43 93/32/EEC Passenger hand-hold for two-wheel vehicles

-- -- --

Headin Separate Directive Subject Approval No(1) Extension Variants and

mooiweer

Rond stempel

mooiweer

Rond stempel

mooiweer

Rond stempel


PAGE 20 / 20

LIST OF CONTENTS

Item Title Drawing No. Notes 1. Frame 71000-A03-H00 2. Vehicle over view 70000-A03-H00 3. Cylinder 12100-E10-H00 4. Cylinder head 12200-E10-H00 5. Piston 13300-E10-000 6. Piston ring 1st 13310-E10-010~1 7. Piston ring 2nd 13310-E10-010~2 8. Piston ring (oil) 13310-E10-010~3 9. Fuel cup comp 12100-A03-H00 10. Carburetor Assy 16100-E10-H00 11. CDI 61115-A03-000 12. Ignition coil, plug cap 61109-A03-000 13. Intake pipe 16410-E10-010 14. 2nd air induction valve 12166-A03-000 15. Air filter Assy 17300-E10-000 16. Inlet silencer 17320-E10-000 17. Exhaust muffler comp 12160-A03-H00 18. Valve angle 25100-E10-H00 19. R-crankcase venthole system 11350-E10-H10 20. Catalytic 12165-A01-000 21. Transmission system 22100-E10-H00 22. Speedometer 63300-A03-000 23. Speedometer 63300-A03-010 24. Speedometer system 62120-A03-H00 25. Diagram of braking system 31115-A03-H00 26. Inner pad 31337-A03-000~1

27. Outer pad 31337-A03-000~2 28. Brake lever Assy (LH) 31405-A03-000 29. Brake lever Assy (RH) 31460-A03-000 30. Brake pedal 31408-A03-000 31. Master cylinder 31406-A03-000

32. Front brake caliper (RH & LH) 31335/31336-A03-000

33. Rear brake caliper 31360-A03-000 34. Mechanical parking brake 31470-A03-000 35. Telltales,controls and indicators 61101-A03-000 36. Manufacturer’s data plate 71237-A03-000 37. VIN code 71236-A03-H00

mooiweer

Rond stempel

mooiweer

Rond stempel

mooiweer

Rond stempel

mooiweer

Rond stempel

mooiweer

Rond stempel

mooiweer

Rond stempel

mooiweer

Rond stempel

mooiweer

Rond stempel

mooiweer

Rond stempel

vehicle technology division - access · pdf filevehicle technology division p.o. box 777 tel....

Documents