SUPERIOR PERFORMANCE& QUALITY IN BLAST CLEANING EQUIPMENT

MANUFACTURED IN CANADABrochure #DSV1904www.modublast.com

VERTICAL AIR DRYERS

Our Vertical ‘Dry-Pro’ Air Dryers by Mod-U-Blast® are available in six models: 250, 450, 750, 1000, 1200 and 1600 CFM. These single tower, deliquescent air dryers offer a smaller footprint and easier portability along with a certified 200 PSI Polyarmor G17 lined Deli-Vessel. All vertical dryers come standard with coalescing filters.

Blasting professionals know that dry compressed air is crucial to successful surface preparation. Flash rusting, clogged blast pots, corroded valves and wasted media are common problems caused by wet air. Dry-Pro vertical air dryers provide superior moisture removal solutions and allow you to get the job done right with properly conditioned compressed air.

Distributed By: MOD-U-BLAST 403 - 69 Avenue

Edmonton, AlbertaT6P - 0C2

Ph: (780) 466-5085 Fax: (780) 465-7317

Service: (780) 425-5510

FEATURES

ADDITIONAL FEATURES

FRL PACKAGE

SIGHT GLASS

TEMPERATURE GAUGE

Polyarmor G17 LINED DELI-VESSEL

AFTERCOOLER

• Air motor regulator, filter and oiler pack allows full control of air motor speed to achieve most efficient operation in varying ambient conditions.

• Ensure peak dryer performance by maintaining sufficient desiccant levels.(Never let desiccant fall below the sight glass window.)

• Important for achieving most efficient air motor setting and for troubleshooting.

• Polyarmor G17 lined approved deli-vessel with 200 PSI maximum pressure.

• Industrial, air motor driven aftercooler cools incoming air to near ambient temperatures allowing moisture to condense out of the compressed air.

DSV250 23” 48” 75” 661 lbs 1-1/2” 2” 200 lbs DSV450 26” 48” 78” 811 lbs 2” 2” 300 lbs DSV750 36” 54” 85” 1200 lbs 2” 2” 400 lbs DSV1000 44” 68“ 93“ 1890 lbs 3” 3” 1000 lbs DSV1200 (Special Order) 44” 68” 95” 2040 lbs 3” 3” 1200 lbs DSV1600 44” 68” 95” 2170 lbs 3” 3” 1250 lbs

MODEL WIDTH LENGTH HEIGHT WEIGHT INLET OUTLET DESICCANT REQ’D

Model NO. DSV1600 Illustrated below

COALESCING FILTERS

• Dry-Pro™ high efficiency coalescing filter removes oil from compressed air stream. Includes filter condition gauge that indicates when it’s time to change the filter element.

• Rugged heavy duty construction • Full load lifting eyes / fork pockets • Operates in sub zero temperatures • Low maintenance and operating cost • Compact design, smaller footprint • Pressure relief valve (150 PSI) • CRN Registered Vessel, U Stamped, National Board Certified, ABSA Certified (Alberta) - 1000, 1200 & 1600 CFM models only, AS1210 Registered (Australia)

• Additional coalescing filter in line with the exhaust of the air motor (allows exhausted oil to be trapped, filtered and reused in the FRL).

Deliquescent Air Dryer Skids, Vertical