vfx70m electronic programmable display - cross … vfx70...radiated emission sae j1113-41 (class 4),...
TRANSCRIPT
VFX70m Electronic Programmable Display
The high performance VFX70m display is designed to provide an operator interface for mobile on and off highway applications. This HMI features a powerful processor, bright sunlight viewable optically bonded LCD assem-bly, configurable CAN channels and flexible IO to meet the needs of a variety of demanding applications.
Technical Data Functional Specification - Physical & Environmental
Dimensions 10.27 x 5.67" x 2.512"Weight 2.25 lbsCase Material Polycarbonate back caseStorage Temperature Range -40°C to +85°COperating Temperature Range -40°C to +85°C Heater StandardIP Rating - Front IP66, IP67 IP Rating - Back IP66, IP67 Power Supply
Supply Voltage 6-36 VDCPeak Supply Voltage 36 VDCMax Power Consumption 10 WMax Power Consumption with Heater Option 22 WMax Sleep Current 400 mAIgnition Pin (K15) Ignition pin will put the unit in ‘sleep’ mode when it powered off.
Programmed with Eaton Pro-FX™ Control Software 32-bit Processor, 7” WVQA Sunlight Viewable Display
2 EATON VFX70m Datasheet E-ELDI-TT002-E August 2013
Technical Data
CPU
CPU Type Freescale i.MX357Frequency 532 MHzBit Width 32 bitsOperating System Linux Memory
RAM 128 MB DDR2Data Memory (RAM retain) 1 MBFlash (ROM program & data combined) 2 GB Standards
Vibration 7.86 G RMS (5-2000Hz) SAE J1455 Section 4.9.4.1Shock 50g - SAE J1455 Section 4.10.4Radiated immunity SAE J1113-21 (150V/m), SAE J1113-26 (15kV/m), EN61000-4-3 (10V/m)Radiated emission SAE J1113-41 (Class 4), CISPR 11 Class B/EN60945 HybridConducted immunity SAE J1113-2 (3.0Vp-p), SAE J1113-4 (200mA), SAE J1113-11 (Level 4), SAE J1113-12 (Level 4), EN61000-4-4, EN61000-4-5, EN60945 Sec 10.3 (3V/10V RMS)
Graphical Interface
Display Type Bonded, Color Transmissive TFT LCD; LCD Size 7” Resolution 800 x 480, WQVGAColor Format Supported 16-bit colorAspect Ratio 16:9Orientation LandscapeDisplay Back Light LED, >1000 cd/m2 (50,000 hr lifetime)Sunlight View ability Direct sunlight Touch Interface (Optional Feature - Not Included on all Models)
Touch screen technology Projected capacitive Video Interface (Optional Feature - Not Included on all Models)
Video Type 3 NTSC/PAL Boot-up
Boot-up Screen CustomizableBoot (first powered-on): TYP. ~ 9 sec. to logo, 17 sec. to first screenWake (ignition switched): TYP. ~1 sec.
CertificationsCE Mark
3EATON VFX70m Datasheet E-ELDI-TT002-E August 2013
Technical Data
Communications CAN Interface 1
CAN Specification 2.0 A, 2.0BBaud rates Configurable 125 KBPS, 250 KBPS, 500 KBPS, or 1MBPSProtocols J1939 and CANOpen Master CAN Interface 2
CAN Specification 2.0 A, 2.0BBaud rates Configurable 125 KBPS, 250 KBPS, 500 KBPS, or 1MBPSProtocols J1939 and CANOpen Master USB Interface
USB Specification USB 2.0 Baud rate Supports USB Full Speed at 6Mbit/sNote: USB interface is not protected against battery level faults.
RS-485 Interface
RS-485 Specification Debugging ConsoleModbus Ready RS-485 port is dedicated to a Linux console.Baud rate 115200 BPS Real Time Clock
Estimated Battery Life Minimum 9.5yr (display never powered)Rechargeable No, Lithium (non-replaceable) Keypads
Number of Buttons 14Button Style Tactile FeedbackButton Backlight Yes Digital Inputs x 5
Type High Side InInput Impedance 10kOhmScan Rate 10Hz (100 ms)Switch-on Level 4.01V( 80% Supply Voltage )Switch-off Level 1.04V( 20% Supply Voltage )Short circuit protection 28V or Ground Analog Inputs x 3 (Software Configurable)
Resolution 10 bitsAccuracy +/- 1% FSMeasuring Ranges Digital, 0-5V, 4-20mA, ResistiveScan Rate 10Hz (100 ms) Digital Input
Type High Side InInput Impedance 100kOhmSwitch-on Level 4.01V (80% Supply Voltage)Switch-off Level 1.04V (20% Supply Voltage)
4 EATON VFX70m Datasheet E-ELDI-TT002-E August 2013
Technical Data
Voltage Input - 0 - 5V
Input Impedance 100kOhm Current Input - 0 - 24 mA
Input Impedance 200 Ohm Resistive (0-5V)
Pull-up Resistance 400 Ohm Frequency Input
Type 3.6VAC – 120VAC Input Impedance (Design Review Required) 14.02 KohmInput Frequency 2 Hz – 10kHzSwitch-on Level 2.10 VSwitch-off Level 1.17 V Outputs Digital Output – 500 mA
Type Low-side Amperage 500 mA Max.Protection Short Circuit Protection Frequency Output
Type Square WaveDuty Cycle 50%, non-adjustableFrequency Range 2 Hz to 3 kHz Connections Connector – 2 x 23 pin Ampseal
Manufacturer AMPModel 770680-1( Black), 770680-4(Gray)Contact Surface Nickel plated Tooling
Manufacturer AMPHand Tool Part Number 58529-1Die Part Number 58529-2
5EATON VFX70m Datasheet E-ELDI-TT002-E August 2013
Block Diagram
8B VBATT-
VFX70m
Display Power
Prog
ram
ing
In
terf
ace
CAN
Bus
(J
1939
/CAN
open
)
Digi
tal
Out
put
(Dig
ital
Low
side
)
15B IGN 7B VBATT+
22B DigitalOut1
5B CAN1_L 6B CAN1_H
18G USB_+5V 17G USB_D+ 16G USB_D- 12G USB_1D
18B CAN2_L 19B CAN2_H
20G USB_Shield 19G USB_GND
13B DigitalIn2 1B DigitalIn1
Digi
tal
Inpu
t (D
igita
l Lo
wsi
de)
RS48
5
Screen: 7” Bonded, Color Transmissive TFT LCD 8 Tactile Feedback Buttons
Processor: Freescale i.MX357, 32 bits,532 MHz Memory: RAM -128 Mbytes , Flash - 256 Mbytes
Note: B & G pin designations indicate black and gray connector locations
20B DigitalIn3 12B DigitalIn4
4B
21B DigitalIn5
AnalogIn1 11B AnalogIn1_GND 3B AnalogIn2
10B AnalogIn2_GND 2B AnalogIn3 9B AnalogIn3_GND
5G RS485_L 4G RS485_H
9G Video1_GND 1G Video1_Input
10G Video2_GND 2G Video2_Input
11G Video3_GND 3G Video3_Input
13G FreqIn1 14G FreqIn1_GND
14B FreqOut1
Freq
uenc
y In
put
Freq
uenc
y O
utpu
t
Vide
o (P
ins o
nly
conn
ecte
d on
vi
deo
vers
ion)
Anal
og In
put
(0-5
V, 4
-20m
A,
Resi
stiv
e)
16
6 EATON VFX70m Datasheet E-ELDI-TT002-E August 2013
Connector Pins
Connector 1
Type Deutsch AMP770680-1 (Black)
Pin
1 Ground 2 Analog Input 33 Analog Input 2 4 Analog Input 1 5 CAN1 L 6 CAN1 H 7 Battery 8 Ground 9 Analog Input 3 Ground 10 Analog Input 2 Ground 11 Analog Input 1 Ground 12 Digital Input 3 13 Digital Input 2 14 Frequency Output 1 15 Ignition In 16 No Connect 17 No Connect 18 CAN2 L 19 CAN2 H 20 Digital Input 4 21 Digital Input 5 22 Digital Output 23 Frequency Output 2
Connector 2 Type Deutsch AMP770680-4 (Grey) Pin 1 Video Input 1 2 Video Input 2 3 Video Input 3 4 RS485H 5 RS485L 6 No Connect 7 No Connect 8 No Connect 9 Video Input 1 Ground 10 Video Input 2 Ground 11 Video Input 3 Ground 12 USB ID 13 Frequency Input 14 Frequency Return 15 No Connect 16 USB D- 17 USB D+ 18 USB 5V 19 USB Ground 20 USB Shield 21 No Connect 22 No Connect 23 No Connect
7EATON VFX70m Datasheet E-ELDI-TT002-E August 2013
Mounting Configurations - Front, Back and Gimble
5.677144.19
10.277261.04
.55914.19
1.96049.79
5.522140.26
8.878225.50
2.75670.00
9.692246.19
4.894124.30
1.06927.15
.40710.34
8-32 X .25" DEEPSTAINLESS INSERTS
4-PLACES
8-32 X .25" DEEPBRASS INSERTS4-PLACES
9.420239.26
C 5.677144.19
10.277261.04
.55914.19
1.96049.79
5.522140.26
8.878225.50
2.75670.00
9.692246.19
4.894124.30
1.06927.15
.40710.34
8-32 X .25" DEEPSTAINLESS INSERTS
4-PLACES
8-32 X .25" DEEPBRASS INSERTS4-PLACES
9.420239.26
C
5.677144.19
10.277261.04
.55914.19
1.96049.79
5.522140.26
8.878225.50
2.75670.00
9.692246.19
4.894124.30
1.06927.15
.40710.34
8-32 X .25" DEEPSTAINLESS INSERTS
4-PLACES
8-32 X .25" DEEPBRASS INSERTS4-PLACES
9.420239.26
C
5.677144.19
10.277261.04
.55914.19
1.96049.79
5.522140.26
8.878225.50
2.75670.00
9.692246.19
4.894124.30
1.06927.15
.40710.34
8-32 X .25" DEEPSTAINLESS INSERTS
4-PLACES
8-32 X .25" DEEPBRASS INSERTS4-PLACES
9.420239.26
C
5.677144.19
10.277261.04
.55914.19
1.96049.79
5.522140.26
8.878225.50
2.75670.00
9.692246.19
4.894124.30
1.06927.15
.40710.34
8-32 X .25" DEEPSTAINLESS INSERTS
4-PLACES
8-32 X .25" DEEPBRASS INSERTS4-PLACES
9.420239.26
C
© 2013 EatonAll Rights ReservedPrinted in USADocument No. E-ELDI-TT002-EAugust 2013
EatonHydraulics Group USA14615 Lone Oak RoadEden Prairie, MN 55344USATel: 952-937-9800Fax: 952-294-7722www.eaton.com/hydraulics
EatonHydraulics Group EuropeRoute de la Longeraie 71110 MorgesSwitzerlandTel: +41 (0) 21 811 4600Fax: +41 (0) 21 811 4601
EatonHydraulics Group Asia PacificEaton BuildingNo.7 Lane 280 Linhong RoadChangning District, Shanghai200335 ChinaTel: (+86 21) 5200 0099Fax: (+86 21) 2230 7240