vibration isolation
TRANSCRIPT
ww
w.k
inet
icsn
ois
e.co
m
Kinetics Noise Control has been engineering and manufacturing vibrationisolation and noise control products and systems for over 40 years. Wepioneered the use of pre-compressed molded fiberglass for vibration isolation.Throughout the years, we have developed and refined a complete line of noiseand vibration control products. In addition to the vibration isolation productsillustrated in the brochure, we also offer complete designed pipe riser isolationsystems, computer-assisted seismic design, engineered floating floor systemsfor control of airborne and impact noise, and a complete selection of barriers,absorbers and damping materials. Kinetics offers the engineering expertise,laboratory, and field testing capabilities to work with you and your acousticalconsultant to develop a solution to your specific noise control problem.
ABOUT KINETICS NOISE CONTROL
United States6300 Irelan PlP.O. Box 655Dublin, Ohio 43017800.959.1229ph. 614.889.0480fx. 614.889.0540
Canada1720 Meyerside DriveMississauga, Ontario
L5T 1A3ph. 905.670.4922fx. 905.670.1698
Vibration Products 3/04
ww
w.k
inet
icsn
ois
e.co
m
800.
959.
1229
RESTRAINED SPRING ISOLATORS
Kinetics Model FLS Restrained Spring Isolators are largediameter, laterally stable steel springs assembled into awelded steel housing designed to limit vertical movement ofthe isolated equipment if equipment weights are reduced orif the equipment is subjected to large external forces. Thespring elements are complete with high frequency vibrationcontrol noise pads and an adjustable top load plate with lev-eling bolts. They are available with deflections 0.71" to 4.00"for loads up to 23,200 lbs. The FLS isolators are recom-mended for the isolation and restraint of large fluid-carryingequipment such as boilers, chillers, and cooling towers, orfor equipment subjected to high wind loads.
Kinetics Model FRS Spring Isolators are light capacity,vertically restrained isolators with rated deflections from0.71" to 2.00" in capacities up to 3,500 lbs. FRS isolators arerecommended for the isolation and restraint of lightweightmechanical equipment subject to high wind loads or equip-ment subject to weight change. FRS isolators can also beused for support of vertical pipe risers where isolation isrequired yet vertical motion controlled. The FRS can be usedin outdoor applications.
FREE-STANDING SPRING ISOLATORS
Kinetics Model FDS SpringIsolators are free-standing,unhoused, large diameterlaterally stable steel springscontained in an upper loadplate/leveling assembly andlower load plate/noise padassembly, for control of high fre-quency vibration. They are alsoavailable as an all-welded unitfor bolt-down applications. FDSspring isolators are designed for
spring deflection ranges from 0.71" to 4.00” with loadcapacity up to 23,200 lbs. FDS spring isolators arerecommended for the isolation of floor-mounted refriger-ation compressors, pumps, packaged air handlers, air-conditioning equipment, centrifugal and axial fans, andinternal combustion engines. For equipment subject toweight change or high wind loads, see RestrainedSpring Isolators.
HOUSED SPRING ISOLATORS
Kinetics Model SL and SM Spring Isolators are highdeflection stable springs assembled into telescopingaluminum or cast iron housings, complete with 1/4"noise pads bonded to the lower load surface. Adjustingand leveling bolts are part of the top housings. ModelSM spring isolators are designed with an adjustablesnubbing feature to reduce movement during start-upand shutdown. Model SM isolators are available withdeflections to 1.84" in capacities from 250 to 3,000 lbs.Model SL isolators are available with the same deflec-tion ranges and capacities from 35 to 3,500 lbs. KineticsModel SL and SM spring isolators are typically used toisolate mechanical equipment subject to freguent start-up and shutdown such as compressors and enginegenerators.
2 7
ROOFTOP ISOLATION CURBS
Kinetics Model KSR Roof Rails are pre-engineered,spring-supported isolation systems designed for curb-supported rooftop equipment. The KSR rails are easy-to-install vibration isolation systems that provide anairtight and watertight seal between the rooftopmechanical equipment and the roof curb. KSR rails areavailable in 1" and 2" deflection.
Kinetics Model ESRHeavy-duty, complete vibration isolation curb for theBIG rooftop unit jobs!Standard Features include:• 1 g seismic restraint & 125 mph wind restraint• Access ports for each isolator to inspect, level, or
change springs after equipment placement• Up to 4" deflection, powder-coated steel springs with
50% overload capacity• High-frequency noise isolation pads• Environmentally inert elastomeric seal for an air- and
watertight closure between the curb and isolation rail• Supply and return duct support hardware• Structural steel curb with wood nailer.
Kinetics Model KSCRAffordable...easy-to-install...all-in-one roof curb ANDvibration isolation for under 20-ton packaged rooftopunits! Standard features include: • Internal seismic restraint• 100 mph wind restraint• 1" or 2" deflection springs• Supply and return flexible connector support hardware• EPDM airtight and weather-tight seal for non-ducted
applications• High profile, non-interference aluminum equipment rail• Accessible, interchangeable springs
ww
w.k
inet
icsn
ois
e.co
m
800.
959.
1229
36
AIR MOUNTS
SESIMIC RESTRAINT ISOLATORS AND SNUBBERS
Kinetics Model FLSS Seismic Control Restrained SpringVibration Isolators, in addition to the same features of ourModel FLS Restrained Spring Vibration Isolators, offeradditional seismic restraint capabilities. The seismiccapacity ratings for isolators are determined at Kineticsby statically loading sample isolators in the vertical, bothhorizontal, and in the vertical and horizontal axis simulta-neously until failure. The resulting maximum limits definethe restraint capacity envelope. Appropriate Model FLSSand FHS Isolators are selected by first determining seis-mic force requirements computed at each isolator usingspecific job specification data and local code require-ments and then comparing those requirements to thecapabilities as defined by the restraint capacity envelope.
Kinetics Model FHS Seismic Control Restrained SpringIsolators meet specifications for Kinetics Model FDS iso-lators and include a steel housing assembly to limit bothlateral and vertical movement of the supported equipmentduring an earthquake without degrading the vibration iso-lation of the spring during normal equipment operatingconditions.
Standard FHS isolators incorporate a steel housing whichencloses a neoprene snubber. Depending on the load andseismic zone, an optional steel spreader plate may beapplied to distribute the load among concrete anchors. Aneoprene pad fitted in series with the spring is provided.Equipment attachment is by way of a bolt screwed down-ward through the equipment foot. Removal of the isolatorfor servicing can be easily accomplished as the isolator isnot fitted with a protruding stud. In conformance with allcurrent building code standards, the restraining system isdesigned to withstand a minimum 1.0 g acceleration force.Motion is limited to approximately 0.2" in any direction.
Kinetics Model FMS Seismically RatedRestraint/Vibration Isolator can be used as an independ-ent restraint device or as a seismically rated vibration iso-lator assembly. Designed for the new building codes, theunit is comprised of a restraint module and an optionalvibration isolation module. This modular design allows theengineer to design for seismic or wind forces independentof the load and deflection requirements of the vibration iso-lator. The vibration isolation module uses Kinetics laterallystable springs.
Kinetics Model KAM and CAM Air Isolators are pneumatic, elas-tomeric vibration mounts. The CAM is available in four (4) sizes sup-porting loads up to 7,500 lbs. The KAM is available in seven (7) sizeswith capacities from 500 to 22,000 lbs. per mount.
Both models are available with automatic leveling controls and custommounting to meet your specific needs.
Typical applications include mechanical equipment and industrialprocess equipment requiring low natural frequency isolation, as wellas protecting sensitive equipment from disturbing floor-borne vibration.
ISOLATION BASES
Kinetics Model CIB-H & L Inertia Base Frames arepre-engineered welded steel pouring frames withwelded-in concrete reinforcement, equipment mountingbolts, and vibration isolator brackets. The CIB bases aredesigned to add mass to the rotating equipment in addi-tion to rigidity and support for vibration isolation. CIBbases are typically used with reciprocating compressors,large chillers, compressors, fans, and pumps, and canaccommodate spring, fiberglass, neoprene, or airmount-type isolation.
Kinetics Model SFB Welded Structural Frame Bases areindividually designed and fabricated to provide rigidity andsupport to mechanical equipment.
Kinetics Model SBB Structural Beam Bases are com-posed up of two (2) structural members used to supportequipment that does not require a unitary base, such assmall close-coupled pumps, fans, and air handlers. Thestructural beams provide rigidity to the equipment andaccommodate the installation of vibration isolation.
Kinetics Seismic Cable Restraints are designed to pro-vide seismic restraint capacity in excess of the new build-ing codes and reduce costly field installation time. Theengineered brackets and cable assemblies are multi func-tional to minimize the number of different parts required todo the job. The dual- purpose KSCA clip attaches thecable to the structure by anchoring to concrete with con-crete anchors or bolting or welding to steel. The twoKSCA clips at the other end of the cable are used toattach the cable to the hanger rod by clamping to thethreaded rod directly above the clevis hanger. Kineticsoffers additional labor-saving components to suspendduct work, mechanical equipment, and electrical gear.
ww
w.k
inet
icsn
ois
e.co
m
800.
959.
1229
4 5
ISOLATION HANGERS
Kinetics Model FH, RH, SH, SRH, and SFH Isolation Hangers are a family of products designed toreduce the transmission of vibration and noise from suspended equipment and systems. FH and RHhangers incorporate fiberglass or elastomer inserts only. SH hangers incorporate a spring insert only.SFH and SRH hangers are combination hangers, containing a fiberglass or elastomer pad insert inseries with a spring. Hanger inserts are designed for up to 50% overload capacity and for rod mis-alignment over 30-degree arc. Brackets will carry 500% overload without failure. Hangers are availableto 4” deflection and in capacities to 3,850 lbs. in standard designs. Hangers feature a Kineticspatented No-Short spring cap which contains indexed steps to correspond to standard washer diame-ters for the appropriate rod diameter. The rod and washer stay centered in the No-Short cap.
KINFLEX Connectors prevent stresses due to expansionand contraction, isolate against the transfer of noise andvibration, and compensate for misalignment. KINFLEX con-nectors absorb movement created in piping systems byambient temperatures, differences in temperature of materi-als handled, and differences in composition. The danger ofbuckling or pulling apart and the resulting maintenance costsare minimized.
Kinetics Model HSR Thrust Restraints are installed toreduce movement associated with fan thrust and areinstalled in pairs at the fan discharge. Model HSR uses1” and 2" deflection springs in 35 to 3,500 lbs capacities.
KINFLEX FLEXIBLE CONNECTORS THRUST RESTRAINTS
NEOPRENE ISOLATORS
FIBERGLASS ISOLATORS
Kinetics Model NP and NG Isolation Pads are single-ribbed or double-ribbed high quality elastomer, usedsingularly or in multiple layers, separated with steelshims. Pads are 45 to 65 durometer and are designedfor 60 to 120 PSI maximum loading. NP pads are avail-able with rated deflections from 0.04" to 0.09". NG padsare available with rated deflections from 0.13" to 0.19".Pads are available in 4”, 6”, 9” and 18" squares and maybe easily cut or drilled to meet field conditions. KineticsModel NP and NG pads can be used to isolate noise,shock, and high frequency vibration generated bymechanical, industrial, or process equipment located ongrade or in non-critical areas.
Kinetics Model RQ and RD Isolation Mounts are one-piece molded neoprene, color coded for identification,and have non-skid ribs on the bottom load surfaces.Each isolator incorporates two (2) bolt-down holes onthe bottom load surface and a tapped steel top load platefor attachment to the supported equipment. Model RQisolators are designed for up to 0.15" static deflection;Model RD is available in four (4) sizes, and eleven (11)capacities from 55 to 4,000 lbs. The RQ is available intwo (2) sizes and four (4) capacities from 500 to 1,300 lbs.Kinetics Model RQ and RD are used to reduce the trans-mission of vibration from small pumps, vent sets, lowpressure packaged air-handling units, etc., and areselected when first cost must be minimized.
Kinetics Model KIP Vibration and Noise Isolation Padsare pre-compressed, inorganic, inert fiberglassindividually coated with a flexible elastomeric moisturebarrier. KIP fiberglass pads offer a constant naturalfrequency over a wide load range. KIP pads are avail-able in capacities from 20 to 16,000 lbs. per pad, inthickness of 1”, 2”, 3”, and 4" and deflections from 0.18”to 1.08". KIP pads are recommended for use in thereduction of vibration produced by pumps, chillers, cool-ing towers, etc. They are also effective in reducingshock transmission from punch presses and otherimpact-producing machinery.
Kinetics Model AC Fiberglass Isolators, complete withload plate and mounting brackets are designed for bolt-down applications such as vent fans, vane axial fans,high-speed motors, and similar equipment. AC fiber-glass isolators are available in sizes with capacitiesfrom 40 to 900 lbs. and deflections of 0.18" to 0.70".
ww
w.k
inet
icsn
ois
e.co
m
800.
959.
1229
4 5
ISOLATION HANGERS
Kinetics Model FH, RH, SH, SRH, and SFH Isolation Hangers are a family of products designed toreduce the transmission of vibration and noise from suspended equipment and systems. FH and RHhangers incorporate fiberglass or elastomer inserts only. SH hangers incorporate a spring insert only.SFH and SRH hangers are combination hangers, containing a fiberglass or elastomer pad insert inseries with a spring. Hanger inserts are designed for up to 50% overload capacity and for rod mis-alignment over 30-degree arc. Brackets will carry 500% overload without failure. Hangers are availableto 4” deflection and in capacities to 3,850 lbs. in standard designs. Hangers feature a Kineticspatented No-Short spring cap which contains indexed steps to correspond to standard washer diame-ters for the appropriate rod diameter. The rod and washer stay centered in the No-Short cap.
KINFLEX Connectors prevent stresses due to expansionand contraction, isolate against the transfer of noise andvibration, and compensate for misalignment. KINFLEX con-nectors absorb movement created in piping systems byambient temperatures, differences in temperature of materi-als handled, and differences in composition. The danger ofbuckling or pulling apart and the resulting maintenance costsare minimized.
Kinetics Model HSR Thrust Restraints are installed toreduce movement associated with fan thrust and areinstalled in pairs at the fan discharge. Model HSR uses1” and 2" deflection springs in 35 to 3,500 lbs capacities.
KINFLEX FLEXIBLE CONNECTORS THRUST RESTRAINTS
NEOPRENE ISOLATORS
FIBERGLASS ISOLATORS
Kinetics Model NP and NG Isolation Pads are single-ribbed or double-ribbed high quality elastomer, usedsingularly or in multiple layers, separated with steelshims. Pads are 45 to 65 durometer and are designedfor 60 to 120 PSI maximum loading. NP pads are avail-able with rated deflections from 0.04" to 0.09". NG padsare available with rated deflections from 0.13" to 0.19".Pads are available in 4”, 6”, 9” and 18" squares and maybe easily cut or drilled to meet field conditions. KineticsModel NP and NG pads can be used to isolate noise,shock, and high frequency vibration generated bymechanical, industrial, or process equipment located ongrade or in non-critical areas.
Kinetics Model RQ and RD Isolation Mounts are one-piece molded neoprene, color coded for identification,and have non-skid ribs on the bottom load surfaces.Each isolator incorporates two (2) bolt-down holes onthe bottom load surface and a tapped steel top load platefor attachment to the supported equipment. Model RQisolators are designed for up to 0.15" static deflection;Model RD is available in four (4) sizes, and eleven (11)capacities from 55 to 4,000 lbs. The RQ is available intwo (2) sizes and four (4) capacities from 500 to 1,300 lbs.Kinetics Model RQ and RD are used to reduce the trans-mission of vibration from small pumps, vent sets, lowpressure packaged air-handling units, etc., and areselected when first cost must be minimized.
Kinetics Model KIP Vibration and Noise Isolation Padsare pre-compressed, inorganic, inert fiberglassindividually coated with a flexible elastomeric moisturebarrier. KIP fiberglass pads offer a constant naturalfrequency over a wide load range. KIP pads are avail-able in capacities from 20 to 16,000 lbs. per pad, inthickness of 1”, 2”, 3”, and 4" and deflections from 0.18”to 1.08". KIP pads are recommended for use in thereduction of vibration produced by pumps, chillers, cool-ing towers, etc. They are also effective in reducingshock transmission from punch presses and otherimpact-producing machinery.
Kinetics Model AC Fiberglass Isolators, complete withload plate and mounting brackets are designed for bolt-down applications such as vent fans, vane axial fans,high-speed motors, and similar equipment. AC fiber-glass isolators are available in sizes with capacitiesfrom 40 to 900 lbs. and deflections of 0.18" to 0.70".
ww
w.k
inet
icsn
ois
e.co
m
800.
959.
1229
36
AIR MOUNTS
SESIMIC RESTRAINT ISOLATORS AND SNUBBERS
Kinetics Model FLSS Seismic Control Restrained SpringVibration Isolators, in addition to the same features of ourModel FLS Restrained Spring Vibration Isolators, offeradditional seismic restraint capabilities. The seismiccapacity ratings for isolators are determined at Kineticsby statically loading sample isolators in the vertical, bothhorizontal, and in the vertical and horizontal axis simulta-neously until failure. The resulting maximum limits definethe restraint capacity envelope. Appropriate Model FLSSand FHS Isolators are selected by first determining seis-mic force requirements computed at each isolator usingspecific job specification data and local code require-ments and then comparing those requirements to thecapabilities as defined by the restraint capacity envelope.
Kinetics Model FHS Seismic Control Restrained SpringIsolators meet specifications for Kinetics Model FDS iso-lators and include a steel housing assembly to limit bothlateral and vertical movement of the supported equipmentduring an earthquake without degrading the vibration iso-lation of the spring during normal equipment operatingconditions.
Standard FHS isolators incorporate a steel housing whichencloses a neoprene snubber. Depending on the load andseismic zone, an optional steel spreader plate may beapplied to distribute the load among concrete anchors. Aneoprene pad fitted in series with the spring is provided.Equipment attachment is by way of a bolt screwed down-ward through the equipment foot. Removal of the isolatorfor servicing can be easily accomplished as the isolator isnot fitted with a protruding stud. In conformance with allcurrent building code standards, the restraining system isdesigned to withstand a minimum 1.0 g acceleration force.Motion is limited to approximately 0.2" in any direction.
Kinetics Model FMS Seismically RatedRestraint/Vibration Isolator can be used as an independ-ent restraint device or as a seismically rated vibration iso-lator assembly. Designed for the new building codes, theunit is comprised of a restraint module and an optionalvibration isolation module. This modular design allows theengineer to design for seismic or wind forces independentof the load and deflection requirements of the vibration iso-lator. The vibration isolation module uses Kinetics laterallystable springs.
Kinetics Model KAM and CAM Air Isolators are pneumatic, elas-tomeric vibration mounts. The CAM is available in four (4) sizes sup-porting loads up to 7,500 lbs. The KAM is available in seven (7) sizeswith capacities from 500 to 22,000 lbs. per mount.
Both models are available with automatic leveling controls and custommounting to meet your specific needs.
Typical applications include mechanical equipment and industrialprocess equipment requiring low natural frequency isolation, as wellas protecting sensitive equipment from disturbing floor-borne vibration.
ISOLATION BASES
Kinetics Model CIB-H & L Inertia Base Frames arepre-engineered welded steel pouring frames withwelded-in concrete reinforcement, equipment mountingbolts, and vibration isolator brackets. The CIB bases aredesigned to add mass to the rotating equipment in addi-tion to rigidity and support for vibration isolation. CIBbases are typically used with reciprocating compressors,large chillers, compressors, fans, and pumps, and canaccommodate spring, fiberglass, neoprene, or airmount-type isolation.
Kinetics Model SFB Welded Structural Frame Bases areindividually designed and fabricated to provide rigidity andsupport to mechanical equipment.
Kinetics Model SBB Structural Beam Bases are com-posed up of two (2) structural members used to supportequipment that does not require a unitary base, such assmall close-coupled pumps, fans, and air handlers. Thestructural beams provide rigidity to the equipment andaccommodate the installation of vibration isolation.
Kinetics Seismic Cable Restraints are designed to pro-vide seismic restraint capacity in excess of the new build-ing codes and reduce costly field installation time. Theengineered brackets and cable assemblies are multi func-tional to minimize the number of different parts required todo the job. The dual- purpose KSCA clip attaches thecable to the structure by anchoring to concrete with con-crete anchors or bolting or welding to steel. The twoKSCA clips at the other end of the cable are used toattach the cable to the hanger rod by clamping to thethreaded rod directly above the clevis hanger. Kineticsoffers additional labor-saving components to suspendduct work, mechanical equipment, and electrical gear.
ww
w.k
inet
icsn
ois
e.co
m
800.
959.
1229
RESTRAINED SPRING ISOLATORS
Kinetics Model FLS Restrained Spring Isolators are largediameter, laterally stable steel springs assembled into awelded steel housing designed to limit vertical movement ofthe isolated equipment if equipment weights are reduced orif the equipment is subjected to large external forces. Thespring elements are complete with high frequency vibrationcontrol noise pads and an adjustable top load plate with lev-eling bolts. They are available with deflections 0.71" to 4.00"for loads up to 23,200 lbs. The FLS isolators are recom-mended for the isolation and restraint of large fluid-carryingequipment such as boilers, chillers, and cooling towers, orfor equipment subjected to high wind loads.
Kinetics Model FRS Spring Isolators are light capacity,vertically restrained isolators with rated deflections from0.71" to 2.00" in capacities up to 3,500 lbs. FRS isolators arerecommended for the isolation and restraint of lightweightmechanical equipment subject to high wind loads or equip-ment subject to weight change. FRS isolators can also beused for support of vertical pipe risers where isolation isrequired yet vertical motion controlled. The FRS can be usedin outdoor applications.
FREE-STANDING SPRING ISOLATORS
Kinetics Model FDS SpringIsolators are free-standing,unhoused, large diameterlaterally stable steel springscontained in an upper loadplate/leveling assembly andlower load plate/noise padassembly, for control of high fre-quency vibration. They are alsoavailable as an all-welded unitfor bolt-down applications. FDSspring isolators are designed for
spring deflection ranges from 0.71" to 4.00” with loadcapacity up to 23,200 lbs. FDS spring isolators arerecommended for the isolation of floor-mounted refriger-ation compressors, pumps, packaged air handlers, air-conditioning equipment, centrifugal and axial fans, andinternal combustion engines. For equipment subject toweight change or high wind loads, see RestrainedSpring Isolators.
HOUSED SPRING ISOLATORS
Kinetics Model SL and SM Spring Isolators are highdeflection stable springs assembled into telescopingaluminum or cast iron housings, complete with 1/4"noise pads bonded to the lower load surface. Adjustingand leveling bolts are part of the top housings. ModelSM spring isolators are designed with an adjustablesnubbing feature to reduce movement during start-upand shutdown. Model SM isolators are available withdeflections to 1.84" in capacities from 250 to 3,000 lbs.Model SL isolators are available with the same deflec-tion ranges and capacities from 35 to 3,500 lbs. KineticsModel SL and SM spring isolators are typically used toisolate mechanical equipment subject to freguent start-up and shutdown such as compressors and enginegenerators.
2 7
ROOFTOP ISOLATION CURBS
Kinetics Model KSR Roof Rails are pre-engineered,spring-supported isolation systems designed for curb-supported rooftop equipment. The KSR rails are easy-to-install vibration isolation systems that provide anairtight and watertight seal between the rooftopmechanical equipment and the roof curb. KSR rails areavailable in 1" and 2" deflection.
Kinetics Model ESRHeavy-duty, complete vibration isolation curb for theBIG rooftop unit jobs!Standard Features include:• 1 g seismic restraint & 125 mph wind restraint• Access ports for each isolator to inspect, level, or
change springs after equipment placement• Up to 4" deflection, powder-coated steel springs with
50% overload capacity• High-frequency noise isolation pads• Environmentally inert elastomeric seal for an air- and
watertight closure between the curb and isolation rail• Supply and return duct support hardware• Structural steel curb with wood nailer.
Kinetics Model KSCRAffordable...easy-to-install...all-in-one roof curb ANDvibration isolation for under 20-ton packaged rooftopunits! Standard features include: • Internal seismic restraint• 100 mph wind restraint• 1" or 2" deflection springs• Supply and return flexible connector support hardware• EPDM airtight and weather-tight seal for non-ducted
applications• High profile, non-interference aluminum equipment rail• Accessible, interchangeable springs
ww
w.k
inet
icsn
ois
e.co
m
Kinetics Noise Control has been engineering and manufacturing vibrationisolation and noise control products and systems for over 40 years. Wepioneered the use of pre-compressed molded fiberglass for vibration isolation.Throughout the years, we have developed and refined a complete line of noiseand vibration control products. In addition to the vibration isolation productsillustrated in the brochure, we also offer complete designed pipe riser isolationsystems, computer-assisted seismic design, engineered floating floor systemsfor control of airborne and impact noise, and a complete selection of barriers,absorbers and damping materials. Kinetics offers the engineering expertise,laboratory, and field testing capabilities to work with you and your acousticalconsultant to develop a solution to your specific noise control problem.
ABOUT KINETICS NOISE CONTROL
United States6300 Irelan PlP.O. Box 655Dublin, Ohio 43017800.959.1229ph. 614.889.0480fx. 614.889.0540
Canada1720 Meyerside DriveMississauga, Ontario
L5T 1A3ph. 905.670.4922fx. 905.670.1698
Vibration Products 3/04