vibrometrix vibration multimetervibrometrix.com/wp-content/uploads/hr-vmx-fiche...download the...

2
VIBROMETRIX Vibration Multimeter Evaluates machine health according to most common ISO guidelines

Upload: others

Post on 19-Dec-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: VIBROMETRIX Vibration Multimetervibrometrix.com/wp-content/uploads/HR-VMX-fiche...Download the technical ˜ che at Machine Dynamics bvba Maasfortbaan 173 2500 Lier Belgium Tel +32

VIBROMETRIX Vibration MultimeterEvaluates machine health according to most common ISO guidelines

Page 2: VIBROMETRIX Vibration Multimetervibrometrix.com/wp-content/uploads/HR-VMX-fiche...Download the technical ˜ che at Machine Dynamics bvba Maasfortbaan 173 2500 Lier Belgium Tel +32

Vibrometrix is a registered trademark of Machine Dynamics www.vibrometrix.com

Measure and evaluate vibration levelsBoth high and low frequency parameters tell the full story

HIGHLIGHTS

❚ ISO 10816 evaluation rules The standard measurement package includes

handy evaluation charts covering the most com-mon vibration criteria such as the ISO 10816 series for electric and diesel motors, blowers, pumps, land based steam turbines, � uid � lm gas turbines and generators.

❚ Industry standard accelerometers The Vibration Multimeter is compatible with stan-

dard IEPE 100 mV/g accelerometers so it can be used with most sensor brands that have been installed on site. By integrating the acceleration signal from the vibration sensor, the devices measures vibration velocity and displacement too.

❚ Clear colour display Thanks to its 160 x 128 pixel crisp backlit colour

display with a 100° viewing angle, VIBROMETRIX Vibration Multimeter is easy to read in dark mea-surement locations as well as in strong sunlight.

❚ Speci� c bearing damage measurement modes

Early bearing damage is not easily detected with standard overall readings. Instead use the po-werful Bearing acceleration or Bearing velocity measurement modes to separate bearing da-mage from other vibration sources in the machine.

VIBROMETRIX Vibration Multimeter is an easy to use industrial overall vibration meter designed to evaluate machine health according to the most common ISO guidelines for motors, pumps, blowers and even diesels and turbo machinery. Additionally the sys-tem measures high frequency vibration on standard IEPE 100 mV/g accelero-meters as well as temperature and has a storage memory for 100 readings.

Connect standard IEPE Accelerometers

Crystal clear colour display

Memory for 100 values with timestamp and � lter setting

Rechargeable Li-ion battery for 12 hours of operation

PC communication with USB mini-B connector

Industrial weatherproof rugged housing

Download the technical � che at www.vibrometrix.com

Machine Dynamics bvbaMaasfortbaan 173

2500 LierBelgium

Tel +32 (0) 494 [email protected]