victorian chemical company pty. limited agricultural 58 horticultural product guide.pdf ·...
TRANSCRIPT
AgriculturalProduct RangeVictorian Chemicals manufactured its first product for agriculture in 1939, Voullaires Ee-Muls-Oyle; this is now the leading Fruit Drying Oil in the Sunraysia Region (Mildura). Since then, our knowledge of oils and surfactant chemistry and manufacturing capability has increased significantly. This has been instrumental in the development of our product range. These products, including the well known spray adjuvants Hasten and Hot-Up, are designed to assist the agricultural industry in its drive for higher productivity and value. Victorian Chemicals remains committed to providing our customers with quality products, and service that is both professional and friendly. We will continue to develop; our understanding of our customers’ requirements, the operations of our company and our technical expertise.
National Sales Manager-Agriculture Mr Chris Barry 83 Maffra Street, Coolaroo, Victoria 3048Email: [email protected] Phone: 03 9301 7003Fax: 03 9309 7966Mobile: 0427 129 572
Victoria
Product Development ManagerMr Peter Jones83 Maffra Street, Coolaroo, Victoria 3048 Email: [email protected]: 03 9301 7059Fax: 03 9309 7966Mobile: 0411 591 414
Victoria
Sales ExecutiveMr Graeme Hackett PO Box 94, Wagga Wagga, NSW 2650 Email: [email protected]: 02 6971 0400 Fax: 02 6971 0411 Mobile: 0428 710 400
Southern New South Wales
Sales RepresentativeMr Stuart England Email: [email protected] Mobile: 0418 877 765
Northern Queensland
Sales Executive-HorticultureMr Geoff Cox83 Maffra Street, Coolaroo, Victoria 3048Email: [email protected] Phone: 03 9301 7058 Fax: 03 9309 7966Mobile: 0418 128 392
Victoria
Sales ExecutiveMr Mick Bellenger P.O. Box 739, Gawler, S.A. 5118 Email: [email protected] Fax: 08 8522 5710Mobile: 0400 861 988
South Australia
Sales RepresentativeMr Dugald Macfarlane PO Box 857, Warwick, QLD 4370 Email: [email protected]
Mobile: 0421 901 424
Northern New South Wales / Southern Queensland
Perth Adelaide
Melbourne
Wagga Wagga
Warwick
Innisfail
Devonport
Victorian Chemical Company Pty. Limited83 Maffra Street, Coolaroo, Victoria 3048, AustraliaTelephone: (03) 9301 7000 Facsimile: (03) 9309 7966 Website: www.vicchem.com Email: [email protected]
Disclaimer: Victorian Chemical Company Pty. Ltd. has taken all reasonable care in preparing the information contained in the bulletin. However because the use of this information is beyond our control, Victorian Chemical Company Pty. Ltd. accepts no responsibility for any consequences whatsoever arising from the use of this information except responsibility imposed under any applicable law.
Disclaimer
AGR058 300611
Sales RepresentativeMr David Rann Email: [email protected] Mobile: 0437 120 937
Tasmania
Sales RepresentativeMr Peter Julian P.O. Box 228, North Beach, W.A. 6920 Email: [email protected]
Phone/Fax: 08 9445 9978 Mobile: 0438 773 171
Western Australia
Sales RepresentativeMr Max Julian P.O. Box 228, North Beach, W.A. 6920 Email: [email protected]/Fax: 08 9243 1190 Mobile: 0412 047 130
Western Australia
Description Key Benefit(s) Applications PackagingCrop & Environment Effects Spray Tank & Application Efficacy / Mode of Action
Fruit & Foliage IPM Soil & Water Droplet Size Evaporation Retention Coverage Penetration
Wet
ting
Agen
ts
Dieline
PMS 485
PMS 202
16674705 Deluge Low Foam Wetting Agent 20LVictorian Chemicals8/10/2009
4 Colour Process
051009
WETTING AGENT
DELUGE LOW FOAM†
™
READ SAFETY DIRECTIONSBEFORE OPENING OR USING
Victorian Chemical Company Pty. Limited83 Maffra Street, Coolaroo, Victoria 3048, AustraliaTelephone: (03) 9301 7000 Facsimile: (03) 9309 7966Website: www.vicchem.com Email: [email protected]
† Trademark used under licenceNOTICE: Victorian Chemical Company Pty. Limited accepts no responsibility for any consequences whatsoever arising from the use of this product except responsibility imposed under any applicable law. The buyer assumes all risk and liability resulting from improper handling, storage or use and accepts and uses this product on these conditions.
APVMA Approval Number:59845/5 - 1000L/0709
CONTENTS: 20 LITRES
Date ofManufacture:
Batch Number:
ACTIVE CONSTITUENT:600 g/L NON-IONIC FATTY ACID ETHOXYLATES
A low foaming wetting and spreading agent for use with insecticides, fungicides and herbicides in
horticulture, grapevines, tree crops sugarcane, broadacre and other situations described in
Directions for Use
DELUGE LOW FOAM Wetting Agent improves your spray results by;
- assisting retention of spray droplets on target surface - increasing wetting and spreading of spray droplets
- improved uptake of pesticides
™
DELUGE LOW FOAM Wetting Agent is a bio-degradable spray additive containing 60% non-ionic surfac-tant for use with fungicides, insecticides and herbicides. It increases wetting, absorption and improved spray coverage. DELUGE LOW FOAM Wetting Agent can be used with both acid and alkaline sprays and mixes easily with all types of water. Prior to use, read all directions on this label and on the label of the pesticide(s) being used. The pesticide(s) label for specific usage and restrictions have precedence over directions for use referred to on this label. If in doubt about the appropriateness of using DELUGE LOW FOAM Wetting Agent, please test by application to a small area before using it on a full-scale basis.
MixingDELUGE LOW FOAM Wetting Agent mixes easily and quickly with water and should be added directly to the spray tank. It should not be added direct to undiluted sprays containing wetting agent.Unless otherwise directed by pesticide label, add DELUGE LOW FOAM Wetting Agent last to the spray tank.
Herbicide SpraysDELUGE LOW FOAM Wetting Agent can be added to all herbicide sprays to increase their efficiency except those which are known to contain adequate wetting agent in the formulations. A wetting agent should be added only where directed on individual labels, as use with selective herbicides outside label directions may reduce crop selectivity. For foliar active herbicides spray to the point where the leaves and stems are just wet. Spraying beyond this will encourage run-off, with obvious loss of spray chemicals. When spraying waxy or hairy leafed plants, which are typically hard to wet, increased activity will be obtained by increasing the rate of DELUGE LOW FOAM Wetting Agent. It is important that the leaves and stems are thoroughly wetted for foliar herbicides to work efficiently, particularly when treating dense, tall vegetation.
When using with a pesticide product, read the label of the pesticide product or products. Where a specific direction not to use wetting agent appears then do not use DELUGE LOW FOAM Wetting Agent. Where a specific usage rate of wetting agent appears, then that takes precedence over the general guidelines in the table below.
GENERAL INSTRUCTIONS
DIRECTIONS FOR USE
SITUATION
Horticultural, grapevine and tree crop sprays
Weedkilling spraysHigh volume power spraysLow volume boom sprayMisting machinesKnapsack
Paraquat and DiquatHigh volume power sprays, Boom sprayKnapsack
Soil residual herbicides eg. Diuron
Fire fighting - Water tank - Knapsack
RATE
10mL/100L
12mL/100L60mL/100L5mL/5L2mL/15L
200mL/100L200mL/100L30mL/15L
125-500mL/100L
10mL/100L2mL/100L
CRITICAL COMMENTS
Recommended for addition to all horticultural, grapevine and tree crop sprays except where formulation has sufficient wetter or where product directs not to add wetter.Use only when spray volume is at least 100L/ha
DELUGE LOW FOAM Wetting Agent can be used with herbicides in sugar, vineyards and orchard situations where direct contact with the crop is avoided
Under very high dilution rates for maximum efficiency, a higher rate of DELUGE LOW FOAM Wetting Agent is used to ensure even coverage of plant foliage and to increase absorption.
When applying to soil active herbicides such as Diuron to standing weeds, add DELUGE LOW FOAM Wetting Agent to thoroughly wet foliage. Consult product labels for individual recommendations.
DELUGE LOW FOAM Wetting Agent increases the wetting power of water which assists in quick control and mopping up of fires. In cases where water may not be readily available and a less drenching spray is needed, a tank full will cover a larger area.
Protection of Wildlife, Fish, Crustacea and EnvironmentToxic to aquatic organisms, although rapidly bio-degradable. Do not contaminate streams, rivers or waterways with the chemical or used containers.
Storage and DisposalStore in the closed, original container, in a cool, well-ventilated area. Do not store for prolonged periods in direct sunlight. Triple, or preferably pressure rinse containers before disposal. Add rinsing to spray tank. Do not dispose of undiluted chemicals on site. If recycling, replace cap and return clean containers to recycler or designated collection point. If not recycling, break, crush or puncture and bury empty containers in a local authority landfill. If no landfill is available, bury the containers below 500mm in a disposal pit specifically marked and set up for this purpose clear of waterways, desirable vegetation and tree roots. Empty containers and product should not be burnt. Refillable Containers: If returning containers for refill do not rinse, instead replace cap and return to designated collection point.
SAFETY DIRECTIONSAvoid contact with eyes and skin. When preparing product for use wear cotton overalls buttoned to the neck and wrist (or equivalent clothing), elbow length PVC gloves, face shield or goggles.
FIRST AIDIf poisoning occurs, contact a doctor or Poisons Information Centre (Phone Australia 131126). If poisoning occurs, contact a doctor or Poisons Information Centre (Phone Australia 131126). If in eyes, hold eyes open, flood with water for at least 15 minutes and see a doctor.
Material Safety Data SheetAdditional information is listed in the Material Safety Data Sheet which can be obtained from the supplier.
NOT TO BE USED FOR ANY PURPOSE OR IN ANY MANNER CONTRARY TO THIS LABEL UNLESS AUTHORISED UNDER APPROPRIATE LEGISLATION.
454mm wide
175m
m d
eep
160mm wide 170mm wide 94mm wide30mm wide
Fold
s ar
ound
cor
ner
Dimensions: 454 x 175mmScale: This label is 79% of full scale when printed onto an A3 pageDate: 05.10.09
WETTING AGENT
DELUGE LOW FOAM†
SAFETY DIRECTIONS
DEluGE† lOW FOAM - Wetting AgentA low foaming 60% Nonionic Surfactant for high value crops
Designed for low phytotoxicity potential and to improve spray results by assisting retention, wetting and spreading of spray droplets and improved uptake of agrichemicals.
Horticulture Viticulture
10L200L1000L
LR MR A NE 4 6 5 4
The Australian SolutionTM
SPRINTA™
SUPERWETTER
READ SAFETY DIRECTIONS BEFORE OPENING OR USING
ACTIVE CONSTITUENT: 1020 g/L POLYETHER MODIFIED
POLYSILOXANE
A non-ionic wetter, spreader, penetrant for use with agricultural pesticides.
SPRINTA improves your spray results by;assisting retention of spray droplets on target surfaceincreasing wetting and spreading of spray droplets
assisting uptake of pesticides
SPRiNTA† - Superwetter100% Organosilicone Nonionic Superwetter
Assists retention of spray droplets, provides excellent coverage on target surface and penetration of Horticultural products.
Forestry Horticulture
2.5L10L HR HR A* NE 1 6 10 8
The Australian SolutionTM
BUFF-IT™
SPRAY ADJUVANTACTIVE CONSTITUENTS:
545 g / L NON-IONIC FATTY ACID ETHOXYLATES,383 g / L PROPIONIC ACID,
192 g / L TRIETHANOLAMINE
A wetting and spreading agent withpH buffering and indicator for use
with agricultural chemicals
BUFF-IT improves your spray results by;optimising pH of spray solution
assisting retention of spray droplets on target surfaceincreasing wetting and spreading of spray droplets
CAUTIONKEEP OUT OF REACH OF CHILDREN
READ SAFETY DIRECTIONS BEFORE OPENING OR USING
BuFF-iT† - Spray AdjuvantA blend of Nonionic Surfactants and Buffering agents with pH Indicator
Buffers spray water to pH range 4 to 5, contains an indicator which changes colour at pH 5, assists spray droplet retention, wetting and spreading on target surfaces.
HorticultureViticulture Broadacre
20L110L1000L
MR MR A NE 4 5 5 4
Oil-
Base
d Ad
juva
nts
The Australian SolutionTM
HASTEN TM
S P R AY A D J U VA N T
READ SAFETY DIRECTIONS BEFORE OPENING OR USING
ACTIVE CONSTITUENT: 704 g/L Ethyl and Methyl Oleate
With 196 g/L Non-ionic Surfactants
Hasten is an Agricultural Adjuvant for use with pesticides.Not for Human Consumption.
Hasten contains Esterified Vegetable Oil and NonionicSurfactants which can improve the performance of
Herbicides, Insecticides and other Agricultural Chemicals by;increasing penetration through waxy cuticles
increasing wetting and spreading of spray dropletsreducing spray droplet evaporation rates
DIRECTIONS FOR USE
GENERAL INSTRUCTIONS
Follow the directions on the agricultural chemical's label. Fill spray tank one-half full of water and add therequired amount of the agricultural chemical while agitating. Add remainder of the water. Add the requiredamount of HASTEN last and continue agitation until completion of spraying.
MIXING
COMPATIBILITY AND CROP SAFETY
PRODUCT DESCRIPTIONHASTEN is a blend of esterified vegetable oil and non-ionic surfactants that is suitable for use as a SprayAdjuvant with a range of agricultural chemicals including Herbicides, Insecticides, Fungicides, Defoliantsand Desiccants where oil based adjuvants are specified on the label.
HASTEN is compatible with a wide range of products and has been used safely and effectively for over 10years with many agricultural chemicals in a wide variety of crops and locations. However, caution mustalways be exercised when applying HASTEN with agricultural chemicals, especially on sensitive crops orduring periods when plants are subject to drought stress, high temperatures or high humidity.If in doubt about the appropriateness of using HASTEN, please check compatibility by mixing smallquantity in a jar and test by application to a small area before using it on a full-scale basis.
IMPORTANTPrior to use, read all directions on this label and on the label of the agricultural chemical being used. Anyspecific usage or restrictions on the agricultural chemical’s label have precedence over directions for usereferred to on this label.
STORAGE AND DISPOSALKEEP OUT OF REACH OF CHILDRENStore in the closed, original container, in a well-ventilated area, out of direct sunlight. Avoid storage below0°C as this product may become cloudy and thicken. Above 0°C, it returns to its normal clear fluid state.Triple, or preferably pressure rinse containers before disposal. Add rinsing to spray tank. Do not disposeof undiluted chemicals on site. If recycling, replace cap and return clean containers to recycler ordesignated collection point. If not recycling, break, crush or puncture and bury empty containers in a localauthority landfill. If no landfill is avail-able, bury the containers below 500mm in a disposal pit specificallymarked and set up for this purpose clear of waterways, desirable vegetation and tree roots. Emptycontainers and product should not be burnt.
Typical usage rate of HASTEN should be approximately 0.5 – 1.0 L/ha.Hasten should not be used at less than 0.2 L/ha or more than 2.0 L/ha.
USE RATE DIRECTIONS
Spray Volume / Hectare Rate of Hasten L / 100 L of Spray VolumeSpray Application10 - 50 L/ha 2 - 4 LLow Volume50 - 200 L/ha 0.5 - 1.0 LMid Volume200 - 1000 L/ha 0.1 - 0.5 LHigh Volume
TYPICAL BACK-PACK SPRAY APPLICATIONMix 10 – 20ml Hasten (and pesticide) into 10L water and spray high volume (375 – 750 L/ha)
May irritate the eyes and skin. Avoid contact with eyes and skin. Avoid inhaling vapour or spray mist.When using the product wear protective clothing. After use wash thoroughly with soap and water. Aftereach day's use wash contaminated clothing.WHEN USING TOGETHER WITH OTHER CHEMICALS CONSULT THEIR SAFETY DIRECTIONS.
If poisoning occurs, contact a doctor or Poisons Information Centre.
Additional information is listed in the Material Safety Data Sheet which can be obtained from the website atwww.vicchem.com.
MATERIAL SAFETY DATA SHEET
FIRST AID
SAFETY DIRECTIONS
NOT TO BE USED FOR ANY PURPOSE OR IN ANY MANNER CONTRARY TO THIS LABEL UNLESSAUTHORISED UNDER APPROPRIATE LEGISLATION.
SPILLAGEIn the event of spillage absorb onto sand or chemical absorbent. Remove residue with detergent and hotwater. Dispose of by normal waste disposal methods conforming to local authority codes.
PROTECTION OF WILDLIFE, FISH, CRUSTACEA AND ENVIRONMENT Do not contaminate streams, rivers or waterways with the chemical or used containers.
GENERAL INSTRUCTIONS cont.
Date of Manufacture:
Batch Number:
International Patents granted and pending for Hasten
The Australian SolutionTM
NOTICE: Victorian Chemical Company Pty.Limited accepts no responsibility for anyconsequences whatsoever arising from the useof this product except responsibility imposedunder any applicable law. The buyer assumesall risk and liability resultingfrom improper handling,storage or use and acceptsand uses this product on theseconditions.
Victorian Chemical Company Pty. Limited83 Maffra Street, Coolaroo, Victoria 3048, AustraliaTelephone: (03) 9301 7000 Facsimile: (03) 9309 7966Website: www.vicchem.com Email: [email protected]
190505
HASTEN† - Spray AdjuvantEsterified Vegetable Oil (Ethylated) and Nonionic Surfactants
Widely cross labeled with leading Herbicide products, Hasten has excellent surface penetration capabilities and is suitable for use with most Horticultural products and in a wide range of spray conditions. BFA approved*
HerbicidesInsecticidesFungicidesDefoliants
20L110L200L1000L
MR LR A L 8 5 5 10
NOTE: HOT-UP Spray Adjuvant is a multi-component adjuvant formulation which provides a variety ofbenefits to herbicides in different conditions. It is particularly effective at improving herbicide efficacyunder stressed conditions. HOT-UP Spray Adjuvant may reduce the antagonism that certain combinationsof herbicides exhibit.
READ SAFETY DIRECTIONSBEFORE OPENING OR USING
GENERAL INSTRUCTIONS
May irritate the eyes and skin. Avoid contact with eyes and skin. Avoid inhaling vapor or spray mist.When using the product wear protective clothing. After use wash thoroughly with soap and water. Aftereach day’s use wash contaminated clothing. WHEN USING TOGETHER WITH OTHER CHEMICALSCONSULT THEIR SAFETY DIRECTIONS.
If swallowed DO NOT induce vomiting. Give a glass of water. If poisoning occurs, contact a doctor orPoisons Information Centre (phone 131126)
Additional information is listed in the Material Safety Data Sheet which can be obtained from the supplier.
Do not contaminate streams, rivers or waterways with the chemical or used containers.
KEEP OUT OF REACH OF CHILDREN.Store in the closed, original container, in a well-ventilated area, out of direct sunlight. Avoid storage below50C or above 350C as components of this product may separate. Within normal temperature range (5 -350C), it returns to its normal clear fluid state, but may require agitation to clarify. Triple, or preferablypressure rinse containers before disposal. Add rinsing to spray tank. Do not dispose of undiluted chemicalson site. If recycling, replace cap and return clean containers to recycler or designated collection point. Ifnot recycling, break, crush or puncture and bury empty containers in a local authority landfill. If no landfillis available, bury the containers below 500mm in a disposal pit specifically marked and set up for thispurpose clear of waterways, desirable vegetation and tree roots. Empty containers and product should notbe burnt.Refillable Containers: If returning containers for refill do not rinse, instead replace cap and return todesignated collection point.
FIRST AID
MATERIAL SAFETY DATA SHEET
Storage and Disposal
Protection of Wildlife, Fish, Crustacea and Environment
The Australian SolutionTM
Compatibility
Mixing
Equipment Maintenance
Follow the directions on the herbicide product’s label.NOTE: To minimise the loss of activity that may be experienced when using certain herbicides in adverseconditions eg. Glyphosate in hard water, it is advisable to add HOT-UP Spray Adjuvant to the water priorto adding the herbicide.
Components of HOT-UP Spray Adjuvant may be mildly corrosive to copper, brass or galvanized parts.Thoroughly flush tanks, pumps and nozzles with water after use.
HOT-UP Spray Adjuvant is suitable for tank mixing with the following products, however all instructionson the herbicide label must be strictly followed. If unsure about the suitability of HOT-UP Spray Adjuvantfor a particular situation, trial a small preparation before full scale use.
Round-up1 CTRoundup1 CT XtraRoundup1 360Nufarm Glyphosate CTDavison Glyphosate Gold 500Touchdown7
Basta3
Ally4 (when mixed with glyphosate)Lontrel5
GramoxoneGarlon2 600Amicide 500Estericide 800Surpass6
MCPA 500
HOT-UP Spray Adjuvant0.25-1.0L/100L of SprayVolume
The high end of theHOT-UP Spray Adjuvant usagerate is recommended whenmixing in hard water(> 340ppm hardness) or duringhot or dry conditions.
Herbicides Rate Critical Comments
HOT-UP Spray Adjuvant is a blend of nonionic surfactants, highly refined mineral oil and ammoniumsulphate that is suitable for use as a Spray Adjuvant with certain non-selective or knockdown herbicides.Herbicidal activity is enhanced by wetting and penetrating weed surfaces and by preventing the reductionof activity associated with adverse water quality or environmental conditions.
Product Description
ImportantPrior to use, read all directions on this label and on the label of the herbicide being used. Any specificusage or restrictions on the herbicide label have precedence over directions for use referred to on thislabel.Many Glyphosate based herbicides instruct not to use spraying oils or mineral oils which this productcontains. However, HOT-UP Spray Adjuvant has been trialled with Glyphosate based herbicides and shownto provide increased efficacy under certain conditions.THIS PRODUCT IS NOT RECOMMENDED FOR USE IN-CROP. CROP INJURY MAY RESULT.
DIRECTIONS FOR USE
RestraintsDO NOT use this product for spraying herbicides in or on crops. Use ONLY in non crop situations.
In the event of spillage absorb onto sand or chemical absorbent. Remove residue with water. Dispose ofby normal waste disposal methods conforming to local authority codes.
Spillage
NOT TO BE USED FOR ANY PURPOSE OR IN ANY MANNER CONTRARY TO THIS LABEL UNLESSAUTHORISED UNDER APPROPRIATE LEGISLATION.
1 Roundup Registered trademark of Monsanto Company USA. 2 Garlon Registered trademark of DowElanco.3 Basta Registered trademark of Hoechst AG.4 Ally Registered trademark of DuPont. 5 Lontrel Registered trademark of DowAgroSciences. 6 Surpass Registered trademark of Nufarm. 7 Touchdown Registered trademark of Zeneca.
HOT-UPTM
S P R AY A D J U V A N T
HOT-UPTM
S P R AY A D J U V A N T
SAFETY DIRECTIONS
International Patents granted and pending for HOT-UP
ACTIVE CONSTITUENTS:340 g/L Non-ionic Surfactant Blend
190 g/L Mineral Oil140 g/L Ammonium Sulphate
A specially formulated product combiningthe properties of wetting, penetrating andreduced antagonism designed to enhancethe performance of knockdown herbicides
in non-crop situations especially in adverseenvironmental conditions.
The Australian SolutionTM
NOTICE: Victorian Chemical Company Pty.Limited accepts no responsibility for anyconsequences whatsoever arising from the useof this product except responsibility imposedunder any applicable law. The buyer assumesall risk and liability resultingfrom improper handling,storage or use and acceptsand uses this product onthese conditions.
Victorian Chemical Company Pty. Limited83 Maffra Street, Coolaroo, Victoria 3048, AustraliaTelephone: (03) 9301 7000 Facsimile: (03) 9309 7966Website: www.vicchem.com Email: [email protected]
190505
Date ofManufacture:
Batch Number:
APVMA Approval Number:53338/110L/0800
CONTENTS : 110 LITRES
HOT-uP† - Spray AdjuvantA blend of Ammonium Sulphate, Nonionic Surfactants and Mineral Oil
Designed to enhance the performance of Glyphosate and other knockdown herbicides in adverse conditions; hard water protection, hot and dry conditions and difficult to wet weeds.
Non-Selective Herbicides
20L110L1000L
N/A N/A B NE 6 7 7 6
The Australian SolutionTM
ACTIVE CONSTITUENT: 865 g/L Canola Oil
For use as an Adjuvant to improve spray droplet deposition,wetting and spreading and reduce evaporation.
NEXUS provides the following benefits for spray applications;reduces evaporation of spray droplets
whilst in flight and from spray depositsimproves wetting sticking and spreading of spray deposits
is biodegradable and based on natural oils
DIRECTIONS FOR USE
IMPORTANT
MIXING INSTRUCTIONS
CROP SAFETYRefer to the directions on the pesticide product label. Caution must be exercised when applying NEXUSwith agricultural chemical products on sensitive crops during periods when plants are subject todrought stress, high temperatures or high humidity. If in doubt about the appropriateness of usingNEXUS, please test by application to a small area before using it on a full-scale basis.
PROTECTION OF WILDLIFE, FISH, CRUSTACEA AND ENVIRONMENT Do not contaminate streams, rivers or waterways with the chemical or used containers.
STORAGE AND DISPOSALKEEP OUT OF REACH OF CHILDREN. Store in the closed, original container, in a well-ventilated area out ofdirect sunlight. Triple, or preferably pressure rinse containers before disposal. Add rinsing to spray tank.Do not dispose of undiluted chemicals on site. If recycling, replace cap and return clean containers torecycler or designated collection point. If not recycling, break, crush or puncture and bury emptycontainers in a local authority landfill. If no landfill is available, bury the containers below 500mm in a dis-posal pit specifically marked and set up for this purpose clear of waterways, desirable vegetation and treeroots. Empty containers and product should not be burnt.
REFILLABLE CONTAINERSIf returning containers for refill do not rinse, instead replace cap and re-turn to designated collection point.
CRITICAL COMMENTSSITUATION
Avoid contact with skin and eyes. Wear overalls, rubber gloves, goggles or disposable face shield. Aftereach day’s use, wash contaminated clothing, gloves and face shield with soap and water.
WHEN USING TOGETHER WITH OTHER CHEMICALS CONSULT THEIR SAFETYDIRECTIONS.
If poisoning occurs, contact a doctor or Poisons Information Centre. Phone Australia 131126.
Additional information is listed in the Material Safety Data Sheet which can be obtained from the supplier.
MATERIAL SAFETY DATA SHEET
FIRST AID
SAFETY DIRECTIONSNOT TO BE USED FOR ANY PURPOSE OR IN ANY MANNER CONTRARY TO THIS LABEL UNLESSAUTHORISED UNDER APPROPRIATE LEGISLATION.
WITHHOLDING PERIOD: NOT REQUIRED WHEN USED AS DIRECTED.
GENERAL INSTRUCTIONS cont.
NEXUS™
S P R AY A D J U VA N T
APPLICATION RATE
Broadacre and BoomSpray
200 mL – 500 mL / 100L
Hand Gun 100 mL – 200 mL / 100L
Use the lower rate when using low applicationrate products
CDA or ULV 1 L – 2 L / ha
Tree Crops (high volume)
100 – 200 mL / 100 L
Vegetables 150 – 200 mL / 100 L
Knapsack 20 – 30 mL / 10 L
GENERAL INSTRUCTIONS
NEXUS mixes quickly and easily with water and should be added directly to the spray tank after theaddition of pesticide. It should not be premixed with any other product prior to adding into the spraytank. Maintain good agitation while spraying.
Prior to use, read all directions on this label and on the label of the pesticide product being used.Any specific usage or restrictions on the pesticide's label have precedence over directions for usereferred to on this label.
NEXUS is an emulsifiable vegetable oil product which is suitable for use with herbicides, insecticidesand fungicides. It can increase pesticide activity by improving spray deposition, increased wetting and reducing evaporation of spray deposits. NEXUS is non-phytotoxic at recommended rates.
COMPATIBILITYNEXUS is compatible with most herbicides, insecticides and fungicides. Always check the label of thepesticide for any adjuvant or compatibility restrictions before use.
NEXUSTM
S P R AY A D J U V A N T
READ SAFETY DIRECTIONS BEFORE OPENING OR USING
The Australian SolutionTM
NOTICE: Victorian Chemical Company Pty.Limited accepts no responsibility for anyconsequences whatsoever arising from the useof this product except responsibility imposedunder any applicable law. The buyer assumesall risk and liability resultingfrom improper handling,storage or use and acceptsand uses this product onthese conditions.
Victorian Chemical Company Pty. Limited83 Maffra Street, Coolaroo, Victoria 3048, AustraliaTelephone: (03) 9301 7000 Facsimile: (03) 9309 7966Website: www.vicchem.com Email: [email protected]
190505
Date of Manufacture:
Batch Number:
APVMA Approval Number:58840/20L/0904
CONTENTS : 20 LITRES
NExuS† - Spray AdjuvantHighly refined Canola Oil and Nonionic Surfactants
Enhances spray droplet deposition on the target by improving retention and reducing evaporation rates. BFA approved*
HerbicidesInsecticidesFungicides
20L110L 200L1000L
LR LR A L 9 3 3 5
Spra
y Oi
ls
TRuMP† Spray Oil - insecticideHighly refined Paraffinic Oil (USR+ >98%) and Surfactants
Very high purity paraffin oil designed to minimize phytotoxicity potential and assist growers in maximizing the value of their produce by killing pests directly and enhancing the performance of certain Horticultural products. BFA approved*
Horticulture Viticulture Cotton
20L200L1000LBulk
LR/MR MR B L 9 2 3 7
VICOL SUMMER OIL
I N S E C T I C I D E
CAUTION KEEP OUT OF REACH OF CHILDRENREAD SAFETY DIRECTIONS BEFORE
OPENING OR USING
The Australian SolutionTM
ACTIVE CONSTITUENT: 825 g/L Petroleum Oil
For the Control of Scale Insects on Citrus,Mites on Pome and Stone Fruit Trees,and Cercospora, Cordana, Leaf Spots,Leaf Speckle on Bananas, and for use
as a Spreader.
ViCOl† SuMMER Oil - insecticideHighly refined Petroleum Oil (USR+ >92%) and Surfactants
Successfully used by growers for over 15 years for the management of insects and disease in their crops. Suitable for use throughout the year when used according to the label.
Horticulture Viticulture
20L200L1000LBulk
MR MR B L 9 2 3 7
VICOL WINTER OILW I N T E R D O R M A N T M I S C I B L E O I L
I N S E C T I C I D E
READ SAFETY DIRECTIONSBEFORE OPENING OR USING
The Australian SolutionTM
DIRECTIONS FOR USE:
Keep out of reach of children.Store in the closed, original container, in a well ventilated area, out of direct sunlight.Triple, or preferably pressure rinse containers before disposal. Add rinsing to spraytank. Do not dispose of undiluted chemicals on site. If recycling, replace cap andreturn clean containers to recycler or designated collection point. If not recycling,break, crush, or puncture and bury empty containers in a local authority landfill. If nolandfill is available, bury the containers below 500 mm in a disposal pit specificallymarked and set up for this purpose clear of waterways, desirable vegetation and treeroots. Empty containers and product should not be burnt.RETURNABLE 1000 L CONTAINERSIf returning 1000 L containers do not rinse, instead replace cap and return to designated collection point.In the event of spillage absorb onto sand or chemical absorbent. Remove residue withdetergent and hot water. Dispose of by normal waste disposal methods conformingto local authority codes.
GENERAL INSTRUCTIONS (cont)
Avoid inhalation of spray mists. Use a mask when spraying in combination with otherchemicals and refer to their safety directions.
NOT TO BE USED FOR ANY PURPOSE OR IN ANY MANNER,CONTRARY TO THIS LABEL UNLESS AUTHORISED UNDERAPPROPRIATE LEGISLATION.
If poisoning occurs, contact a doctor or Poisons Information Centre. If swallowed, DONOT induce vomiting. Give a glass of water.
FIRST AID
CROP PEST STATE RATE CRITICAL COMMENTSL/100L of water
Application in winter whentrees are dormant. Still sunnydays represent the bestconditions for spraying. Do notspray after bud swell.
Apply as a post pruningapplication. Spray in midwinter to ensure that vines arefully dormant.
Pome FruitStone Fruit
Grapes
BryobiaMite
EuropeanRed Mite
BryobiaMite
OystershellScale
Prune Scale
GrapeleafBlister MiteEuropeanRed MiteEuropeanRed Mite
Vic, SA,Tas.NSW,Qld.WA
Vic. SA,WA
NSW,Qld.
Tasmania
Tasmania
NSW, Vic.SA
NSW, Vic.Qld. SA,
WATasmania
2L/100L
3L/100L
2L/100L
2L/100L
3L/100L
2L/100L
2L/100L
3L/100L
3L/100L
2L/100L
GrapevineScale
Apply in mid winter when trees or vines are dormant. Spray coverage; A liberalapplication of the product is required to ensure complete coverage of all eggs.
Pour the required amount of water into the mixing tank and while agitating add therequired amount of VICOL WINTER OIL. When using in combination with otherpesticides, mix the pesticide first according to the manufacturers instructions, thenadd VICOL WINTER OIL last. Maintain continuous agitation while spraying.
Do not contaminate streams, rivers or waterways with the chemical or usedcontainers.
PROTECTION OF WILDLIFE, FISH, CRUSTACEA AND ENVIRONMENT
MIXING INSTRUCTIONS
GENERAL INSTRUCTIONS
VICOL WINTER OILW I N T E R D O R M A N T M I S C I B L E O I L
I N S E C T I C I D E
Additional information is listed in the Material Safety Data Sheet which can beobtained from the supplier.
MATERIAL SAFETY DATA SHEET
STORAGE AND DISPOSAL
VICOL WINTER OIL should not be tank mixed with any herbicide, insecticide orfungicide except in strict accordance with the manufacturers instructions.
COMPATIBILITY
San Jose Scale
SAFETY DIRECTIONS
919203
ACTIVE CONSTITUENT: 861 g/L Petroleum Oil
For Dormant Season Control of CertainMite and Scale Insects on Pome and Stone
Fruit Trees and on Grapevines.
The Australian SolutionTM
NOTICE: Victorian Chemical Company Pty.Limited accepts no responsibility for anyconsequences whatsoever arising from the useof this product except responsibility imposedunder any applicable law. The buyer assumesall risk and liability resultingfrom improper handling,storage or use and acceptsand uses this product onthese conditions.
Victorian Chemical Company Pty. Limited83 Maffra Street, Coolaroo, Victoria 3048, AustraliaTelephone: (03) 9301 7000 Facsimile: (03) 9309 7966Website: www.vicchem.com Email: [email protected]
190505
Date of Manufacture:
Batch Number:
APVMA Approval Number:33182/200L/1097
CONTENTS : 200 LITRES
ViCOl† WiNTER Oil - insecticideRefined Petroleum Oil and Surfactants
Designed for use only on trees and plants that are completely dormant, this product provides cost effective control of certain insect pests.
Horticulture Viticulture
20L200L1000LBulk
HR MR B L 10 1 2 6
Hort
icul
tura
l Spe
cial
ties
The Australian SolutionTM
HITMAN™
S O A P I N S E C T I C I D E
ACTIVE CONSTITUENT: 285 g/L Potassium Salts of Fatty Acids
For the control of insect pests on broadacrecrops, fruit trees, vegetables, nut crops andnurseries as per the directions for use table.
HITMAN™
S O A P I N S E C T I C I D ECROP PEST RATE CRITICAL COMMENTSOutdoor Crops, Aphids 1.5 – 3.0L in This product may not be Vegetables, Thrips 100L of water suitable for delicate ferns,Fruit trees, Mealybug mosses, flowers and plants Pot Plants and Two Spotted Mite under stress. Use the lower Ornamentals Spider-mite rate in Integrated control
Whitefly programs and on tender foliage.
DIRECTIONS FOR USE:
Spray when insects are noticed. Spray insects directly and repeat as necessary. A completecoverage of the target is necessary. Apply to the point of run-off. Apply morning or evening whentemperatures are cooler. Re-apply 5-7 days later or as necessary. Use high pressure with finedroplet. It is important that the spray makes direct contact with pests.
GENERAL INSTRUCTIONS
DO NOT mix with other chemicals including fertilizers unless a trial mix was conducted.DO NOT use during the hot part of the day.
RESTRAINTS
MIXING INSTRUCTIONSShake the container before opening. Clean, soft water is required to achieve effective results.Maintain good agitation while spraying.
PROTECTION OF WILDLIFE, FISH, CRUSTACEA AND ENVIRONMENTDO NOT contaminate streams, rivers or waterways with the chemical or used containers.
STORAGE AND DISPOSALStore in the closed, original container, in a cool, dry place out of reach of children. Do not store forprolonged periods in direct sunlight. Triple or preferably pressure rinse containers before disposal.Add rinsing to spray tank. Do not dispose of undiluted chemicals on site. Break, crush or punctureand bury empty containers in a local authority landfill. If no landfill is available, bury thecontainers below 500mm in a disposal pit specifically marked and set up for this purpose clear ofwaterways, desirable vegetation and tree roots. Empty containers and product should not beburnt.
For refillable containers, empty contents fully into application equipment. Close all valves andreturn to point of supply for refill or storage.
NOT TO BE USED FOR ANY PURPOSE OR IN ANY MANNER CONTRARY TO THISLABEL UNLESS AUTHORISED UNDER APPROPRIATE LEGISLATION.WITHHOLDING PERIOD: Not required when used as directed.
If poisoning occurs, contact a doctor or Poisons Information Centre. Phone Australia 131 126.
Additional information is listed in the Material Safety Data Sheet which can be obtained from thesupplier.
MATERIAL SAFETY DATA SHEET
FIRST AID
INFORMATION CENTRE, PHONE AUSTRALIA 131 126
The Australian SolutionTM
NOTICE: Victorian Chemical Company Pty.Limited accepts no responsibility for anyconsequences whatsoever arising from the useof this product except responsibility imposedunder any applicable law. The buyer assumesall risk and liability resultingfrom improper handling,storage or use and acceptsand uses this product onthese conditions.
Victorian Chemical Company Pty. Limited83 Maffra Street, Coolaroo, Victoria 3048, AustraliaTelephone: (03) 9301 7000 Facsimile: (03) 9309 7966Website: www.vicchem.com Email: [email protected]
190505
Date of Manufacture:
Batch Number:
APVMA Approval Number:58472/20L/0304
CONTENTS : 20 LITRES
HiTMAN† - Soap insecticideSelected Potassium soaps. An organically approved contact insecticide for soft bodied insects and wetting
agent that has no withholding period and poses a low risk for users and the environment. BFA approved*
Horticulture Viticulture
10L20L200L
MR MR A S 3 7 7 3
The Australian SolutionTM
READ SAFETY DIRECTIONS BEFORE OPENING OR USING
ACTIVE CONSTITUENT: 596 g/L Ethyl and Methyl Esters of Fatty
Acids produced from Food Grade Canola Oil
An emulsifiable concentrate to assistvine fruit drying.
NOT TO BE USED FOR ANY PURPOSE OR IN ANY MANNER,CONTRARY TO THIS LABEL UNLESS AUTHORISED UNDERAPPROPRIATE LEGISLATION.
Dissolve 2.0 kg of Potassium Carbonate per 100litres of Water. Then stir in the required amount ofVoullaire’s EE-MULS-OYLE.Dissolve 600 grams of Potassium Carbonate per 100litres of Water. Then stir in the required amount ofVoullaire’s EE-MULS-OYLE.MAINTAIN LEVEL OF THE DIP TANK WITH A STOCKSOLUTION OF THE SAME MIXTURE. Dissolve 1.25 kg of Potassium Carbonate per 100litres of Water. Then stir in the required amount ofVoullaire’s EE-MULS-OYLE. Dissolve 600 grams of Potassium Carbonate per 100litres of Water. Then stir in the required amount ofVoullaire’s EE-MULS-OYLE. Dissolve 600 grams of Potassium Carbonate per 100litres of Water. Then stir in the required amount ofVoullaire’s EE-MULS-OYLE.Dissolve 600 grams of Potassium Carbonate per 100litres of Water. Then stir in the required amount ofVoullaire’s EE-MULS-OYLE.Dissolve 2.5 kg of Potassium Carbonate per 100litres of Water. Then stir in the required amount ofVoullaire’s EE-MULS-OYLE.IMMERSE FRUIT FOR 15 MINUTES.Dissolve 2.0 kg of Potassium Carbonate per 100litres of Water. Then stir in the required amount ofVoullaire’s EE-MULS-OYLE.Dissolve 1.5 kg of Potassium Carbonate per 100litres of Water. Then stir in the required amount ofVoullaire’s EE-MULS-OYLE. Spray within 7 daysof applying the first spray.
Sultanas Dipping First Dip
Second Dip
1.5 Litres
500 mls
Sultanas RackSpraying
First Spray
SecondSpray
1 Litre
500 mls
Sultanas VineSpraying
First Spray
SecondSpray
500 mls
Gordos,Walthams
Dipping Cold Dip 2 litres
Gordos,Walthams
RackSpraying
First Spray
1.5 – 2 Litres
SecondSpray
1 Litre
500 mls
DIRECTIONS FOR USE:
Use recommended rates only and take care in measuring all ingredients. EXCESSIVE POTASHRESIDUE ON BERRIES LEADS TO PROCESSING DAMAGE AND POOR QUALITY FRUIT. Slowdrying is caused by unfavourable drying conditions, such as cool, still or humid weather. Foreven-drying, the fruit must be completely covered with emulsion. To help ensure this, the emulsion may be re-applied 4-5 days after the initial treatment. Dryingtime is retarded, not enhanced, by additional unnecessary applications of drying emulsion. Ifrain occurs within three days of application and removes significant amounts of emulsion itshould be re-applied. Caustic Potash should not be used on sultanas in any circumstances,and is not recommended for raisins. Avoid applying Voullaire’s EE-MULS-OYLE to immature fruit of less than 22O Brix, and avoidspraying at low ambient temperatures (<15OC). When Vine Spraying, apply emulsion within 4days of cane cutting or vice versa.
SUGGESTIONS FOR USE
Fill the tank with water and with agitation dissolve the required amount of Potassium Carbonate,when completely dissolved add the required amount of Voullaire’s EE-MULS-OYLE.
Do not contaminate streams, rivers or waterways with this chemical or used containers.
KEEP OUT OF REACH OF CHILDREN.Store in the closed, original container, in a well ventilated area, out of direct sunlight. Triple, orpreferably pressure rinse containers before disposal. Add rinsing to spray tank. Do not dispose ofundiluted chemicals on site. If recycling, replace cap and return clean containers to recycler ordesignated collection point. If not recycling, break, crush, or puncture and bury empty containers ina local authority landfill. If no landfill is available, bury the containers below 500 mm in a disposal pitspecifically marked and set up for this purpose clear of waterways, desirable vegetation and treeroots. Empty containers and product should not be burnt. Returnable 1000 L Containers: If returning 1000 L containers do not rinse, instead replace cap andreturn to designated collection point.
In the event of spillage absorb onto sand or chemical absorbent. Remove residue with detergent andhot water. Dispose of by normal waste disposal methods conforming to local authority codes.
SPILLAGE
STORAGE AND DISPOSAL
PROTECTION OF WILDLIFE, FISH, CRUSTACEA AND ENVIRONMENT
MIXING INSTRUCTIONS
GENERAL INSTRUCTIONS
May irritate the eyes and skin. Avoid contact with eyes and skin. Avoid inhaling vapor or spray mist.When using the product wear protective clothing. After use wash thoroughly with soap and water.After each days use wash contaminated clothing.
If poisoning occurs, contact a doctor or Poisons Information Centre.
Additional information is listed in the Material Safety Data Sheet which can be obtained from thesupplier.
MATERIAL SAFETY DATA SHEET
FIRST AID
SAFETY DIRECTIONS
VINE CROP SITUATION APPLI-CATION
Rate of Voullaire’sEE-MULS-OYLE per/100L of water
CRITICAL COMMENTS
M U LT I - P U R P O S E D R Y I N G O I L
Voullaire’s™
EE-MULS-OYLE™
M U LT I - P U R P O S E D R Y I N G O I L
Voullaire’s™
EE-MULS-OYLE™
The Australian SolutionTM
NOTICE: Victorian Chemical Company Pty.Limited accepts no responsibility for anyconsequences whatsoever arising from the useof this product except responsibility imposedunder any applicable law. The buyer assumesall risk and liability resultingfrom improper handling,storage or use and acceptsand uses this product onthese conditions.
Victorian Chemical Company Pty. Limited83 Maffra Street, Coolaroo, Victoria 3048, AustraliaTelephone: (03) 9301 7000 Facsimile: (03) 9309 7966Website: www.vicchem.com Email: [email protected]
190505
Date of Manufacture:
Batch Number:
APVMA Approval Number:33407/20L/0198
CONTENTS : 20 LITRES
VOullAiRE’S† EE-MulS-OYlE† - Multi-purpose Drying OilEsterified Vegetable Oil and Surfactants. Reduces the drying time of fruit, particularly grapes. Reduced exposure to the
environment can increase the value of the produce. Components approved for use by the USA Food and Drug Administration. BFA approved*
Horticulture 20L200L1000L
N/A N/A A L 7 6 6 8
GAlA† - Growth RegulatorGibberellic Acid (GA
3) in Ethyl
Oleate and SurfactantsA unique non-flammable and non-poisonous liquid formulation of Gibberellic Acid for use as a foliar spray to promote beneficial effects on grapes, prunes and citrus.
Grapes Citrus Prunes
1L10L LR LR B L 8 3 4 9
*BFA - Biological Farmers of Australia - Allowed Input for Organic growers+ USR - UnSulphonated Residue - a measure of the paraffinic content or purity of the oil† Trademark used under licence
introduction:Products containing oils and surfactants (Products) can be used as adjuvants to enhance the effects of Horticultural products by; -protecting the Horticultural product’s active ingredient (a.i.) from degradation-increasing the amount of a.i. that hits and is retained on the target-increasing the spread or penetration of the a.i. across or into the target-increasing the time the a.i. can be taken up into the target Or provide direct beneficial effects (Petroleum Spray Oils / Insecticidal Soaps).In addition to the benefits which these Products may bring, they have potential to cause adverse effects to the Crop and Environment. This Guide is designed to help users and those advising them to select appropriate Products on the basis of the benefits and risks associated with their use.The following Ratings are based on research results that used Products at rates as recommended on their label. Whilst much of the data for this Guide has been obtained by testing the Products alone (without Horticultural products) it has also drawn on experience of the use of the Products when used as adjuvants with Horticultural products. The effect of adjuvant plus Horticultural product may be greater or less than the expected effect from each applied alone. Environmental conditions can also increase the likelihood of adverse effects. Therefore it is recommended in all cases when using a Product in a new situation that a test be carried out on a small area before wide scale use.
Crop & Environmental Effects Fruit & FoliageThe Fruit and Foliage ratings are based on a series of trials where Products were applied to Horticultural crops (grapes, apples, tomatoes and lettuce) without any Horticultural products. The Products were generally applied at minimum and maximum label rates at a number of times through a season and then the crops were observed for any adverse effects.These Products are generally considered inert however, because of their surface acting properties (spreading wetting, penetrating) they may make plant surfaces more susceptible to damage by sunlight, desiccation, other Horticultural products or by direct damage. lR low Risk - the Product is unlikely to cause any adverse crop effects.MR Moderate Risk - use of the Product may result in some damage to certain crops.HR High Risk - significant crop damage has been observed for these Products. Crop damage for these Products is highly rate dependent so where possible, choosing a lower rate will reduce the risk of adverse crop effects. Testing to small-scale before wider use is strongly recommended.N/A These Products are not designed for direct use to actively growing crops
integrated Pest ManagementThe iPM ratings are based on a series of trials where aqueous solutions of the Products were applied directly to the following commercially important beneficials:Predatory Mite Typhlodromus occidentalis (adult mite)Parasitic Wasp Trichogramma carverae (adult wasp)Predatory Green Lacewing Mallada signatus (first instar larvae)lR The Product is generally considered to pose a low risk to beneficials when used within normal label application rates.MR The Product poses a low risk to beneficials when used at lower rates but risk increases with increasing use rate.HR The Product poses a high risk to beneficials and is generally not suited to IPM Programs.N/A These Products are not designed for direct use to actively growing crops
Soil & WaterThe degradation of surfactants and oils in Soil and Water is dependent on their chemical structure. Generally materials derived from natural origin such as vegetable oils, which comprise straight chain lipids, are easily and safely biodegraded whilst branched and particularly cyclic structures which are found more commonly in oils from mineral deposits (petroleum oils, mineral oils) are slower to break down and may result in more hazardous by-products as they decompose.A rating indicates that these products are expected to biodegrade rapidly in the environment.B rating indicates that the Product will take longer to break down and use on or near waterways should be avoided.A* rating for Sprinta indicates that this product is toxic to aquatic organisms due to its ability to greatly reduce the surface tension of water. However the organosilicone surfactant is also fairly quick to degrade in water and once the degradation process has commenced the hazard of the product has passed.Whilst all of the Products listed here are relatively easily and safely biodegraded in the environment, there are oil and surfactant products used in Horticulture which can cause significant environmental problems. Victorian Chemicals chooses not to market such products.
Spray Tank & ApplicationDroplet Size** – Adjuvants when added to a tank mix of Horticultural products may affect the droplet size that is produced through spray nozzles. In this column, the Products are classed according to whether they will typically increase droplet size (L), decrease droplet size (S) or have no effect (NE).Evaporation – Rapid spray droplet dry down can adversely affect the performance of some Horticultural products primarily by reducing the time an active ingredient has to penetrate the target. In this column, Products are rated according to how effective they are in reducing the evaporation of spray droplets with Winter Oil at 10 being the best.
Efficacy/Mode of ActionThe Ratings for the following categories are based on water alone being 1 with higher values indicating an increase in the particular function.Retention** – The Products can affect how spray droplets interact with target surfaces on initial impact. In this column, Products are rated according to the degree that they assist in spray droplets being retained on the target with A-Lure rated at 8 being the best.Coverage – Some Horticultural products require thorough coverage of the target surface for best performance. Coverage is determined primarily by the number of spray droplets present and their degree of spread on the target surface. In this column, Products are rated according to how effective they are in spreading the spray droplet across a target surface with Sprinta rated at 10 being the best.Penetration – The Products will affect the waxy cuticles on plants to varying degrees and therefore have different capacities in helping Horticultural products penetrate target surfaces. In this column, the Products are rated according to how effective they are in modifying target surfaces to increase active ingredient penetration with Hasten rated at 10 being the best.
**NOTE: Retention & Droplet SizeProducts that are less effective at helping retain droplets (<5) generally produce larger droplets ex the nozzle. It is commonly known that smaller droplets are usually more easily retained on target surfaces than larger droplets but are more likely to cause off-target damage. It may be possible, depending on the particular situation at hand, to increase spray droplet retention by setting up the spray system to achieve the optimum droplet size for a certain tank mix and spray conditions. Before undertaking such a step it is recommended that a thorough assessment for potential off-target damage be performed.
Horticultural Product GuideProduct Rating Guide