victorian defence alliances | victorian defence alliances ......victoria’s defence sector is an...

2

Chair’s Foreword Victoria’s industry is a proven supplier of land equipment and systems. We

are at the leading edge of innovation, engineering, design, manufacturing

and research and development for land systems equipment, products

and services. In particular, our success in the production and support of

military vehicles, provision of systems integration services and the design

and supply of soldier support systems and equipment is testimony to the

proven capabilities of our industry.

An essential element of our industry is our strong supply chain capabilities

with many of our companies supporting and supplying products and

services to domestic and international supply chains.

The Government of Victoria, in partnership with the Australian Industry

& Defence Network – Victoria, supports the Victorian Defence Alliance –

Land Systems. Membership is open to all companies operating in Victoria

with the potential to supply products and services into the domestic and

international land systems market.

The Alliance has been established to support the land systems industry in Victoria to win work in domestic and international land

systems supply chains. It presents a single point of focus for companies supplying and sustaining land systems equipment and those

providing support and services to that sector.

The Alliance supports industry through advocacy, the provision of information on market opportunities and by establishing effective

pathways for connecting Alliance members with industry primes and key Government stakeholders. It also provides opportunities for

networking, collaboration and mentoring.

The Alliance has around 300 member companies, with a significant number promoting their capabilities in this Brochure. I invite all

those seeking proven and trusted partners for land systems industry work to consider the capabilities of our Alliance Members.

Miles Partridge

Chair

Victorian Defence Alliance - Land Systems

ENVIRONMENTAL TESTING -DST GROUP FISHERMANS BEND

A DMTC led project uses the CARTMAN system at DST to test nanostructured fabrics for CBR (Chemical,

Biological & Radiation) protection suit systems.Source: DST, Department of Defence.

FRONT COVER IMAGE Hawkei vehicle designed and produced by

Thales Bendigo, Victoria.

1

Victorian Defence Alliance - Land Systems Committee

Mission StatementTo maximise the opportunities for Victoria’s industry to win land systems work, both locally and in the international market, and to achieve rapid, sustainable and long term growth in the land systems sector.

Miles Partridge Chair

Technical Director Tectonica Australia Pty Ltd Tel: +61 3 9381 6700 [email protected]

Adam Burger Committee Member

Sales Manager AME Systems (Vic) Pty Ltd Tel: +61 3 5352 9000 [email protected]

James Sandlin Committee Member

Program Development Manager DMTC Ltd Tel: +61 3 9214 5274 [email protected]

Phil Jarratt Committee Member

General Manager Logistic Engineering Services Tel: +61 8698 6400 [email protected]

Brydon Johnson Deputy Chair

Director Systematiq Tel: +61 3 8687 2179 [email protected]

Paul Stokes Committee Member

Projects Director Cablex Pty Ltd Tel: +61 3 9575 3088 [email protected]

Matt Grech Committee Member

Land and Aero Systems Manager Penske Power Systems Tel: +61 2 8825 6108 [email protected]

Maxime Kerault Committee Member

Head of Business Innovation Invenio Pty Ltd Tel: +61 3 9896 8807 [email protected]

Mich Mak Committee Member

GM, Investor Relations & Marketing Titomic Limited Tel: +61 3 9558 8822 [email protected]

Iain Watt Committee Member

Senior Business Development Lead Nova Systems Tel: +61 3 9024 1851 [email protected]

2

Victorian Defence AlliancesThe Victorian Defence Alliances are supported through a partnership between the Australian Industry & Defence Network

– Victoria and the State Government of Victoria. Membership of the Alliances is open to all Victorian companies seeking to

supply products and services to the national and international defence industry market.

The Alliances bring focus, cohesion and unity to the actions and initiatives of companies with a shared and common

purpose in the functional capability domains of Victoria’s defence industry sector. They allow member companies to act

together to deliver timely, cost effective, innovative and reliable solutions to meet Defence needs.

The Alliances support member companies through information sharing, advocacy, networking, collaboration and capability

building to assist member companies to bid for work in national and international defence industry supply chains.

Importantly, the Alliances provide effective and efficient arrangements for connecting members with industry primes and

key government stakeholders.

3

VICTORIANDEFENCEALLIANCESUBMARINES

VICTORIANDEFENCEALLIANCEM A R I T I M E

VICTORIANDEFENCEALLIANCE

LAND SYSTEMS

VICTORIANDEFENCEALLIANCED I G I T A L

VICTORIANDEFENCE

ALLIANCES

VDA

VICTORIANDEFENCEALLIANCEA E R O S PA C E

4

INTEGRATED POWER SYSTEMS TRIALAustralian soldier trialing the Soldier Integrated Power System developed by Tectonica (Victoria) with CSIRO and ANU under a

Concept Technology Demonstrator Program.

5

Australian Industry & Defence Network – Victoria (AIDN-Vic) Champions the cause of Victoria’s SMEs in Defence industry

The Australian Industry & Defence Network – Victoria (AIDN-Vic) is the Nation’s largest professional body, advocating of behalf of, and

providing strategic and policy guidance into, Victoria’s dynamic base of small and medium dual-use and defence industry companies.

AIDN-Vic assists its’ Members to capitalise on opportunities provided across Australian and Global defence/security markets through

the formation of strategic partnerships and collaboration nationally.

Victorian Defence Alliances

AIDN-Vic, in partnership with the Victorian Government, has established five Victorian Defence Alliances including the Land Systems

Alliance. The other Alliances are: VDA-Aerospace, VDA-Digital, VDA-Maritime and VDA-Submarines. The Alliances act as a catalyst

through advocacy, networking, collaboration and mentoring to assist member companies to bid for work in national and global defence

industry supply chains.

Defence Market Intelligence and Networking

AIDN-Vic helps its Members’ collaborate nationally with dual-use and defence industry suppliers and provides connections with Defence and defence industry prime

companies. AIDN-Vic organises networking events, seminars, trade missions and a range of other industry support initiatives, promoting a collaborative and capacity

building approach.

Communication link between Industry and Government

AIDN-Vic represents the interests of its Members by providing a communication link between those members and State and Commonwealth Government Departments.

These include the Commonwealth Department of Defence (Capability, Acquisition and Sustainment Group), the Department of Industry, Innovation and Science and the

Victorian Government Department of Economic Development, Jobs, Transport and Resources. AIDN-Vic also represents its Members through advocacy on matters that

shape defence and security industry policy and strategy.

National Organisation

AIDN-Vic is the Nations’ largest professional advocacy body for dual-use and defence industry SMEs, representing over 300 member companies with interests in Victoria

and nationally. AIDN-Vic shares strategic relationships with many national and international professional advocacy bodies and is a strong proponent of national capacity

building through collaboration.

Visit www.aidnvic.org.au to discover the niche capabilities that you may be seeking or if you are interested in membership in AIDN-Vic please email

Claire S. Willette, Chief Executive Officer [email protected] or phone: +61 (0) 474 838 467.

Vic

7

Victoria’s defence sector is an important part of the state’s economy, contributing up to $8

billion annually. It employs approximately 20,000 people (7,000 in industry and 13,000 in the

Australian Defence Organisation) and has more than 400 businesses which make equipment

and provide services for defence activities.

Victoria has significant capabilities in the design, development and manufacture of a range

of military vehicles, as well as the delivery and support of land equipment, products, systems

and services to the Australian Defence Force. Victoria is also home to the Department of

Defence’s Land Systems Division, adding to the state’s strengths in defence land systems

development.

More than 200 businesses are involved in land defence systems in Victoria, including

manufacture of protected vehicles, combat systems, munitions and defence apparel, with

particular expertise in:

• Ballistic protection for personnel and vehicles

• Combat clothing and personal load carrying equipment

• Communications, command and control systems

• Military training and support

• Munitions

• Protected military vehicles

• Support logistics

• Vehicle design and testing

• Vehicle upgrades and enhancements.

The Victorian Government’s vision is for an innovative, globally competitive, highly skilled and

adaptive defence industry that maintains its position at the leading edge of providers serving

the ADF and global supply chains.

The Victorian Government actively supports the state’s defence industry through:

• targeted investment advocacy, promoting Victoria as a competitive location for major

defence prime contractors and projects

• facilitation of global collaboration by linking Victorian industry into international defence

supply chains

• promotion of Victorian industry capabilities

within domestic and international defence trade

shows and missions

• provision of information to industry on defence

market opportunities and procurement

processes

• encouraging R&D through support for

innovation and facilitation of infrastructure and

new technologies

• developing a highly skilled workforce by supporting Victoria’s tertiary and vocational

training sectors

• facilitating effective stakeholder engagement across the Victorian defence industry

to develop teams of SMEs with the capacity and agility to target defence market

opportunities

• programs and grants, such as the Victorian Defence Industry Supply Chain Program, and

Boost your Business, which help SMEs become defence supply chain ready

• industry support to help companies improve productivity and competitiveness in global

markets.

A key part of the state’s commitment to the Victorian defence industry in this regard is the

advice, guidance and advocacy provided to government and industry by the Victorian Defence

Industry Advocate, the Defence Council Victoria, and the Victorian Defence Alliances.

The Victorian Government, through the Department of Economic Development, Jobs,

Transport and Resources (DEDJTR), will continue to work closely with the Commonwealth

Department of Defence and the defence industry to identify and support strategic industry

capability requirements, including domestic and international land defence projects.

With proven expertise in delivering complex defence projects and recognised globally for

innovation and world class defence industry capabilities, Victoria can make an important

contribution to Australia’s future defence needs.

PROVEN EXPERTISE – DEFENCE EXCELLENCE

Victorian Land Systems CapabilitiesVictoria's land systems industry has a proven record of success in delivering a wide range of land capabilities used

by the Australian Defence Force. All major defence primes delivering land force equipment and services have major

operations in Victoria.

Victoria’s industry is the major national centre for the design, engineering, systems integration, testing, production

and support of military vehicles, land equipment and soldier support systems. Victoria also has a strong land

systems research and development capability that is leading innovation in the equipment and systems used by the

nation’s land forces.

The success of Victoria’s industry in delivering land systems equipment, products and services has been dependent

on over 300 small to medium enterprises that provide supply chain support to the sector. These companies have

demonstrated their ability to meet the needs of industry and to be trusted supply chain partners. They are well

positioned and able to play their role in the delivery and support of the next generation of land force equipment.

The capabilities and credentials of some of the companies that form Victoria’s highly competent and responsive

land systems industry are identified in this Directory against the following broad capability areas:

• Design

• Electrical & Electronics

• Engines & Drive Train

• ICT & Software

• Manufacturing & Fabrication

• Materials Testing & Engineering

• Professional Services

• Research & Development

• Systems Integration

• Through Life Support

• Weapon Systems

9

Capability Glossary

DesignThe provision of design and engineering services for the design, production and sustainment of systems and components used on land equipment and systems.

Electrical & ElectronicsThe design, development, production and support of electrical and electronic equipment and systems use in the military vehicle and land equipment production and sustainment industry.

Engines & Drive TrainThe supply of engine and propulsion systems and components for use in the military vehicle and land equipment production and sustainment industry.

ICT & SoftwareThe design, development, production and support of ICT, software and hardware network and communication systems for the land environment.

Manufacturing & FabricationThe production, fabrication and assembly of components and systems for the military vehicle and land equipment production and sustainment industry.

Materials Testing & EngineeringThe development and testing of material and the processing of materials into shapes and forms for use in the in the military vehicle and land equipment production and sustainment industry.

Professional ServicesThe provision of engineering, accounting, legal, training, project management, information technology and general consultancy services to defence and land systems industry clients.

Research & DevelopmentThe provision of research and development services to support the military vehicle and land equipment production and sustainment industry.

Systems IntegrationThe provision of systems integration services to support the military vehicle and land equipment production and sustainment industry.

Through Life SupportThe provision of through life support services to maintain and support military vehicles and land equipment and systems.

Weapon SystemsThe design, production or supply of ammunition, munitions and armaments for use by military forces.

10

Desig

n

Electrical &

Electro

nics

Eng

ines & D

rive Train

ICT

& S

oftw

are

Manufacturing

& Fab

rication

Materials Testing

& E

ngineering

Pro

fessional S

ervices

Research &

Develo

pm

ent

System

s Integratio

n

Thro

ugh Life S

upp

ort

Weap

on S

ystems

Contents

Able Industries Engineering _________________________________________________________________________________ 12Acacia Foundry ___________________________________________________________________________________________ 12ACS Australia _____________________________________________________________________________________________ 13Aerospace Material Pty Ltd _________________________________________________________________________________ 13Agility Logistics Pty Ltd ____________________________________________________________________________________ 14Air Radiators ______________________________________________________________________________________________ 14Alfons Haar _______________________________________________________________________________________________ 15Altair Engineering __________________________________________________________________________________________ 15AME Systems (VIC) Pty Ltd _________________________________________________________________________________ 16Amphenol Australia Pty Ltd _________________________________________________________________________________ 16AMT _____________________________________________________________________________________________________ 17ANCA Pty Ltd _____________________________________________________________________________________________ 17Anywise __________________________________________________________________________________________________ 18AOS _____________________________________________________________________________________________________ 18Applied Fasteners and Tooling_______________________________________________________________________________ 19APV ______________________________________________________________________________________________________ 19ATTAR ____________________________________________________________________________________________________ 20Austest Laboratories ______________________________________________________________________________________ 20Australian Aerospace Engineering ___________________________________________________________________________ 21Australian Automotive Research Centre ______________________________________________________________________ 21Australian Precision Technologies Pty Ltd ____________________________________________________________________ 22Australian Welding Solutions ________________________________________________________________________________ 22A.W.Bell Pty Ltd ___________________________________________________________________________________________ 23Bartlett Manufacturing _____________________________________________________________________________________ 23Black Stump Technologies _________________________________________________________________________________ 24Bunjil Energy _____________________________________________________________________________________________ 24C4 Engineering Pty Ltd ____________________________________________________________________________________ 25Cablex Pty Ltd ____________________________________________________________________________________________ 25Calbah ___________________________________________________________________________________________________ 26carecompany.com.au ______________________________________________________________________________________ 26Chemring Australia ________________________________________________________________________________________ 27Cider House ICT __________________________________________________________________________________________ 27Codarra Advanced Systems ________________________________________________________________________________ 28Communications Design and Management Pty Ltd ____________________________________________________________ 28Community Chef __________________________________________________________________________________________ 29Cornell Design Victoria _____________________________________________________________________________________ 29Dana Australia Pty Ltd _____________________________________________________________________________________ 30Daronmont Technologies ___________________________________________________________________________________ 30Deakin University _________________________________________________________________________________________ 31Defence Science Institute __________________________________________________________________________________ 31DEK Technologies _________________________________________________________________________________________ 32Direct Edge Manufacturing _________________________________________________________________________________ 32DMTC ___________________________________________________________________________________________________ 33Don Kyatt Spare Parts _____________________________________________________________________________________ 33Draeger Australia Pty Ltd ___________________________________________________________________________________ 34DVR Engineering Pty Ltd ___________________________________________________________________________________ 34EnerSys Australia Pty Ltd __________________________________________________________________________________ 35Envirofluid ________________________________________________________________________________________________ 35

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

Chair’s Foreword _______________________Inside Front Cover

VDA-Land Systems Committee __________________________ 1

The Victorian Defence Alliances _________________________ 2

Australian Industry & Defence Network - Vic ______________ 5

Victorian Government Support __________________________ 6

Victorian Land Systems Capabilities _____________________ 8

Capability Glossary ____________________________________ 9

Alliance Member List __________________________________74

11

Desig

n

Electrical &

Electro

nics

Eng

ines & D

rive Train

ICT

& S

oftw

are

Manufacturing

& Fab

rication

Materials Testing

& E

ngineering

Pro

fessional S

ervices

Research &

Develo

pm

ent

System

s Integratio

n

Thro

ugh Life S

upp

ort

Weap

on S

ystems

Desig

n

Electrical &

Electro

nics

Eng

ines & D

rive Train

ICT

& S

oftw

are

Manufacturing

& Fab

rication

Materials Testing

& E

ngineering

Pro

fessional S

ervices

Research &

Develo

pm

ent

System

s Integratio

n

Thro

ugh Life S

upp

ort

Weap

on S

ystems

Fire Protection Technologies ________________________________________________________________________________ 36Fluid Dynamics ___________________________________________________________________________________________ 36Geelong Defence Alliance __________________________________________________________________________________ 37GPSat Systems Australia Pty Ltd ____________________________________________________________________________ 37GreyScan ________________________________________________________________________________________________ 38Harrop Engineering Australia _______________________________________________________________________________ 38HERE Technologies _______________________________________________________________________________________ 39Heuch Refrigeration _______________________________________________________________________________________ 39Hide Away Safe Co ________________________________________________________________________________________ 40Holmwood Group _________________________________________________________________________________________ 40HYDAC __________________________________________________________________________________________________ 41Ideation Product Solutions _________________________________________________________________________________ 41Infosys Portland __________________________________________________________________________________________ 42Innovative Security and Data _______________________________________________________________________________ 42Integra Systems __________________________________________________________________________________________ 43Integrated Design & Engineering Solutions P/L ________________________________________________________________ 43INTERCHEM PTY LTD _____________________________________________________________________________________ 44Invenio Pty Ltd ____________________________________________________________________________________________ 44Ion Systems ______________________________________________________________________________________________ 45JVAT _____________________________________________________________________________________________________ 45L3 Technologies __________________________________________________________________________________________ 46Lean Design Australia ______________________________________________________________________________________ 46Logistic Engineering Services _______________________________________________________________________________ 47Luna Nameplate Industries _________________________________________________________________________________ 47Mackay Defence __________________________________________________________________________________________ 48MACRO Recruitment ______________________________________________________________________________________ 48Mantra Group _____________________________________________________________________________________________ 49Marand __________________________________________________________________________________________________ 49Matrix Applied Computing Ltd ______________________________________________________________________________ 50MEMKO Pty Ltd __________________________________________________________________________________________ 50Micro Planning International ________________________________________________________________________________ 51Milspec Manufacturing _____________________________________________________________________________________ 51Moog Australia ___________________________________________________________________________________________ 52MoTeC Pty Ltd ____________________________________________________________________________________________ 52Nexus Training Solutions ___________________________________________________________________________________ 53Nobles ___________________________________________________________________________________________________ 53Nova Systems ____________________________________________________________________________________________ 54Open Welding ____________________________________________________________________________________________ 54Paradigm Press Pty Ltd ____________________________________________________________________________________ 55Pennant Australasia _______________________________________________________________________________________ 55Penske Power Systems ____________________________________________________________________________________ 56Phasor Innovation _________________________________________________________________________________________ 56PHM Technology __________________________________________________________________________________________ 57Plattar ___________________________________________________________________________________________________ 57PPG Commercial Performance Coatings _____________________________________________________________________ 58Project Director ___________________________________________________________________________________________ 58Quartek Pty Ltd ___________________________________________________________________________________________ 59Quest Sale _______________________________________________________________________________________________ 59

Rae-Line _________________________________________________________________________________________________ 60REALM - Solutions For The Future __________________________________________________________________________ 60RMIT UNIVERSITY ________________________________________________________________________________________ 61Ronson Gears ____________________________________________________________________________________________ 61RPC Technologies Pty Ltd __________________________________________________________________________________ 62RUAG Australia ___________________________________________________________________________________________ 62R.V.S. INDUSTRIES PTY LTD _______________________________________________________________________________ 63Scientific Management Associates (Operations) Pty Ltd ________________________________________________________ 63Siemens Ltd ______________________________________________________________________________________________ 64Silverback Cargo Care _____________________________________________________________________________________ 64SRX _____________________________________________________________________________________________________ 65Strategic Connections Group _______________________________________________________________________________ 65Supacat __________________________________________________________________________________________________ 66Swagelok Eastern Australia _________________________________________________________________________________ 66Swinburne University of Technology _________________________________________________________________________ 67SYPAQ Systems Pty Ltd ___________________________________________________________________________________ 67Systematiq _______________________________________________________________________________________________ 68Tectonica Australia ________________________________________________________________________________________ 68Textron Systems Australia __________________________________________________________________________________ 69The Smart Think __________________________________________________________________________________________ 69Titomic Limited ___________________________________________________________________________________________ 70Towers Group Pty Ltd ______________________________________________________________________________________ 70Trimcast Products Pty Ltd __________________________________________________________________________________ 71Uniform Safety Signs ______________________________________________________________________________________ 71Vappro Corrosion Control Australia Pty Ltd ___________________________________________________________________ 72Way Out Evacuation Systems _______________________________________________________________________________ 72Weld Australia ____________________________________________________________________________________________ 73YTEK ____________________________________________________________________________________________________ 73

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

LAND SYSTEMS CAPABILITY AREAS

PRODUCTS

SERVICES

ICT & Software ●

Professional Services ●

Research & Development ●

12

CAPABILITIES

ACACIA FOUNDRYwww.linkedin.com/company/acacia-foundry/

• Strategic Defence Business Development consulting• Provision of mentoring and training to senior staff• Preparation for Defence readiness• Alliance creation and management

• ICT Services Consulting • Contract negotiaion• Major Account Management• Geospatial and data analytics consulting

CAPABILITIES

• Australian Welding Solutions• HERE Maps• CitiPower, Powercor and United Energy• Savvi Au Pty Ltd

KEY CUSTOMERS

• Member Institute Learning Professionals• Defence Industry Course Alumni

QUALITY APPROVALS & AWARDS

• Deep understanding of Australian and international industries; Defence supply chain, geospatial, ICT

• All consultants have Australian security clearances• Extensive data base and contact list to help you reach the

key decision makers• Long successful track record in strategic Business

Development, closure and delivery

• Australian Defence market analysis for your product or service

• Successful contract negotiation services• Expert in complex and long sales cycles• Highly qualified staff in law, economics, training and

Defence supply chain

DISCRIMINATORS

Craig WilliamsChief ExecutiveHarbour Glimpses Pty Ltd65 Nirvana Avenue, Malvern East VIC 3145Tel: +61 (0) 438 809 646Email: [email protected]

• Defence Recognised Supplier• ISO9001 (2015) Certified by Best Practice• ISO14001 / ISO3834 Certified by Best Practice• AS4801 Certified by Best Practice


• Kewder Engineering (CNC Machining)• PPG Paints

• Department of Defence• Thales• Supacat• Mercedes Benz Asia Pacific / Land Rover Aust.

KEY CUSTOMERSKEY PARTNERS

DISCRIMINATORS

ABLE INDUSTRIES ENGINEERINGwww.ableind.com.au

Stephen MartynManaging DirectorAble Industries Engineering5 Sutton Street, South Kingsville VIC 3015Tel: +61 3 9391 1522Email: [email protected]

• Over 35 years proven defence capability • Expert Project Management team with masters level

capability • System Engineering Capabilities • Certified welders / specialist welding / robotic welding

• Proven Supply Chain Management / M1 ERP System• Mature Integrated Quality Management System (QMS)• Responsiveness to changing and emerging requirements • Can do attitude

• Project Management, Design and FEA Analysis• CNC Punching, Laser Cutting• 8 Axis Robotic / Specialist Welding / Precision Spot Welding

(Mil Spec)• Military specification CNC spot welding

• Specialised Precision Fabrication, Assembly and Integration• 2D/3D CAD/CAM Facilities• Ballistic plate processing and welding• Military Specification Painting (DPP, CARC)


PRODUCTS

SERVICES

Design ● ●

Manufacturing & Fabrication ● ●

Professional Services ● ●

Research & Development ● ●

Systems Integration ● ●

Through Life Support ● ●

Tel: Email:


PRODUCTS

SERVICES

Materials Testing & Engineering ● ●LAND SYSTEMS CAPABILITY AREAS

PRODUCTS

SERVICES

Design ●

Manufacturing & Fabrication ●

Materials Testing & Engineering ●



Through Life Support ●

13

ACS AUSTRALIAwww.acs-aus.com

• Lightweight Composites Design, Analysis and Optimisation• Crashworthiness and Impact Simulation• Novel Composite Materials and Manufacturing Technology

Development• Fire protection technology and simulation

• Testing and Certification• Prototyping and Technology Implementation• Composite and Metal Repair Technologies• Composite and Metal Inspection and Structural Health

Monitoring

CAPABILITIES

• Department of Defence• EADS / Airbus Group• Thales• Cassidian

KEY CUSTOMERS• aadi Defence• CSIRO Manufacturing Flagship• Braendler Engineering• Pacific ESI

KEY PARTNERS

• ISO 9001• JEC Asia Innovation Award Winner 2015• JEC Paris Innovation Award Winner 2014• CRC Association Star Award 2013


• Expert knowledge in the design, manufacture and maintenance of composite materials

• More than 20 years of experience in defence related composites technology development and implementation

• Patented materials and manufacturing technologies available for commercialisation

• An interdisciplinary, integrated and flexible design and manufacturing team

• Globally recognised and awarded organisation• Experience in diverse markets including aerospace,

defence, automotive, ground transport, oil and gas• Experience with ITAR related projects• Personnel with current Australian security clearance

DISCRIMINATORS

Tel: Email:

Andre DuarteBusiness Development ManagerAdvanced Composite Structures Australia Pty Ltd198 Lorimer Street, Port Melbourne VIC 3207 +61 3 9676 4951 [email protected]

• Hysol Metal to Metal Structural Adhesives • Composite Resins,Fillers and Potting Compounds • PR & PS Fuel Tank and General Sealants • Alodine and Anti-Corrosion Treatments

• Aircraft Grade Aluminium & Titanium • Laminated Shims • Ball, Roller and Rod End Bearings • All certified and Traceable

CAPABILITIES

• Quick Step -JSF Project• Marand Engineering -JSF Project• ASC- Air Warfare Destroyer Project• BAE- Defence through life support projects

KEY CUSTOMERS• Henkel GMBH Adhesives• RTI Corporation- Titanium• AMI Metals- Aluminium• Wencor Corp- Bearings

KEY PARTNERS

• AS 9120 RevA (Certified by LRQA)• ISO 9001:2008 (Certified by LRQA)• IAQG “OASIS” Registered• Registered under UKAS scheme


• Proven Track record in Defence Projects • Only fully Australian owned company in our field • Five temperature zone monitored warehouse• Time and Temperature sensitive materials specialists

• ITARS & EAR Trained and Experienced Staff• Metals, Adhesives, Sealants and Surface Treatments

Stocked in Melbourne• Weekly Consolidated Dangerous Goods Air Freight

Shipments from Europe and USA

DISCRIMINATORS

AEROSPACE MATERIAL PTY LTDwww.aerospacematerials.com.au

Derek ChenhGeneral ManagerAerospace Material Pty Ltd6 Ovata Drive, Tullamarine VIC 3043 +61 3 9338 6995 [email protected]

14

AGILITY LOGISTICS PTY LTDwww.agility.com

• Freight Forwarding Services in Air, Ocean, Customs & Road Transportation

• 3PL & 4PL Contract Logistics Services• Warehousing, Storage & Packaging • Transportation, Distribution & Procurement Solutions

• Defence and Government Services & Humanitarian Logistics

• Specialty Services in Project Logistics, Fairs & Events Logistics, Chemical Logistics and Fuel Logistics

• Freight Management, IT & Supply Chain Solutions. • Customs Clearance Consultancy and Landside Services

CAPABILITIES

• ASC • UK Ministry of Defence• US Defence Logistics Agency• United Nations

KEY CUSTOMERS• Agility Defence & Government Services• Agility Project Logistics• Agility Global Integrated Logistics • Agility Fairs & Events Logistics

KEY PARTNERS

• ‘Vision Zero Accident’ Program• ‘Be Safe, Stay Safe’ Program• AS/NZA ISO 14001 (2010)• ISO9001:2008 (QMS 2010)


• Global Integrated Logistics specialising in complex Defence Industry solutions

• Top 10 Global Logistics (3PL) Provider and Industry Leader in Emerging Markets

• Extensive Global Network | 500 Offices | +100 Countries | 22,000 Employees

• Global technology platform supporting full visibility of supply chain logistics solutions

• Defence Industry expertise with project management teams ensuring critical response in challenging situations

• Defence Project Risk Management planning, identification, analysis, monitoring and control

• Past experience in International Government and Military environments

• Diverse experience in Australian Industry with Project Logistics in Energy, Oil, Gas, Mining & Water

DISCRIMINATORS

Tel: Email:

Michael BacarellaCorporate Business Development ManagerAgility Logistics Pty Ltd28-32 Sky Road, Melbourne Airport VIC 3045 +61 3 9339 0888 [email protected]

AIR RADIATORSwww.airradiators.com

• Extensive manufacturing and assembly capability in Australia and including LCC manufacturing in Thailand

• Fully qualified welders and modern plant equipment to turn sheet metal into fully fabricated and validated product

• Non-ferrous casting for rapid prototyping and component castings

• High-end precision machining• Engineering and Product Development• Complex sub assembly construction• Full air movement solutions matched to engine cooling

packages

CAPABILITIES

• Thales Australia - LAND116 Bushmaster Project• CASG - Leopard AS1 cooling group upgrade• Caterpillar • PACCAR

KEY CUSTOMERS• Adrad Group• MTU• Cummins• Tominaga

KEY PARTNERS

• ISO 9001:2008 - Lloyd• LoRS 402 VIC/TAS2016• Kenworth Supplier of the Year• Victorian Manufacturing Hall of Fame


• Over 40 years of knowledge and experience in custom design of heat transfer and air movement products

• Experienced Mechanical Engineers fully trained in latest 3D modeling, CFD, FEA tools

• Extensive Lean Six Sigma factory trained workforce

• Full scale wind tunnel to validate thermal performance of all our manufactured heat transfer matrix

• Capable of delivering complete • Ability to verify through vigorous design and development

before products get to factory floor

DISCRIMINATORS

Tel: Email:

Jove ManevBusiness Development ManagerAir Radiators45 Heales Road, Corio VIC 3214 + 61 3 5275 6644 [email protected]


PRODUCTS

SERVICES



PRODUCTS

SERVICES

Design ●

Engines & Drive Train ● ●


Materials Testing & Engineering ● ●



15


PRODUCTS

SERVICES

Design ● ●

Electrical & Electronics ● ●








Weapon Systems ● ●


PRODUCTS

SERVICES

Systems Integration ●


ALFONS HAARwww.alfons-haar.com.au

• Alfons Haar are a specialist fuel handling equipment supplier

• Supplier of leading edge fuelling systems for both aviation and land based refuelling

• Specialist global leader in onboard ship based helicopter refuelling and in-flight refuelling (HIFR) systems

• We work with bulk fuel specialists involved in fuelling vehicles and aircraft, or transport and transfer of fuels

CAPABILITIES

• Australian Department of Defence• New Zealand Defence Force• Defence support companies - BAE, Babcock etc• Systems integrators - Haulmark, Holmwood etc

KEY CUSTOMERS• FAUDI Aviation• Elaflex hose and fittings• Manntek• Fafnir and Titan Logix

KEY PARTNERS

• Alfons Haar Maschinenbau ISO 9001


• Thousands of fuel pumping and dispensing systems in use by military forces worldwide

• ENOVIA - Management of program, contract and product data

• Ruggedised designs have proven extremely reliable in military service over several decades

• Designed to be easily self-serviced in the field

• Built with a military pedigree spanning over 60 years• Specialists in mobile military refuelling with over 4300 NSN

coded items in our range of fuelling equipment• Alfons Haar fuelling equipment has been used in most

major Australian military fuelling projects for many decades

DISCRIMINATORS

Tel: Email:

Ivan LawrieDirectorHAAR Australia2 East Circuit, Sunshine West VIC 3020 +61 3 9311 6904 [email protected]

ALTAIR ENGINEERINGwww.altairengineering.com.au

• Altair HyperWorks is the most comprehensive, open-architecture, multi-physics CAE platform

• Altair ProductDesign consultancy deliver product engineering services from concept development to maintenance

• Finite Element Analysis (FEA) - linear and non-linear implicit and explicit

• Design optimisation from full vehicle architecture to detailed component and fatigue minimisation

• Blast and crash simulation• Electro-magnetics simulation• Computational Fluid Dynamics (CFD) with Fluid-Structure

Interaction (FSI)• Multi-Body Dynamics (MBD) & suspension simulation

CAPABILITIES

• Aerospace: Airbus, Boeing, Lockheed Martin, Raytheon• Automotive: Supacat, CASG, Ford, Ferrari• Defence: BAE Systems, Thales, Australian DoD, US DoD• Marine: Naval Group, British Aircraft Carrier Alliance, US Navy

KEY CUSTOMERS

• Engineering: nCode, FEMFAT, Materialise, MapleSim• Engineering: ESAComp, Moldex3D, Fluidyna• Engineering: MADYMO, Airbus STRENGTH2000• Computing: Microsoft Azure, SGI, Cray, HP, Amazon AWS

KEY PARTNERS

• 2010 Boeing Performance Excellence Award• NASA Engineering and Safety Centre Group Award• 2012 Top Design Software Brands in the Electronics

Industry• 2012 Gold Stevie


• Over 30 years experience• Combination of engineering software and services means

our software gets the most rigorous testing, and our engineers have direct access to the developers

• Industry leading optimisation tools allow you come up with reliable minimum mass designs first time

• Extensive experience across all industry verticals, from subsea to aerospace

• Trusted by the worlds leading OEMs and suppliers, including leading defence suppliers and CASG

• Altair HyperMesh is the industry leading finite element preprocessor

• Our software solutions scale very efficiently on up to 16,000 cores providing 5x faster run times than others

• Multi-physics capabilities allow you to design whole systems within one environment

DISCRIMINATORS

Tel: Email:

Alex QuirkTechnical ManagerAltair Engineering Software Pty Ltd512/1 Queens Road, Melbourne VIC 3004 +61 3 9866 5557 [email protected]

16

AME SYSTEMS (VIC) PTY LTDwww.amesystems.com.au

• High level of defence system integration and manufacture of complex electrical wire harness and sub assemblies

• Design and supply of high level turn-key dashboards, control boxes & complex systems for major defence partners

• Manufacture to IPCWHMA-620 and military specifications• Custom connector overmold and interface design to the

highest level of harsh environments

• CAD 3D drawing, 3D printing, design and prototyping• Design capabilites and assistance in prototyping to

production for both wiring harness and connectors • Through life support from end of serial production to after

market demands• Radio frequency cables and associated testing (insertion

loss, return loss and hi pot testing)

CAPABILITIES

• Thales, Supacat, Varley• Caterpillar, Bombardier• Kenworth Trucks, Volgren• Mahindra Aerospace

KEY CUSTOMERS

• TE Connectivity• Tycab Australia• Amphenol• ITT Canon

KEY PARTNERS

• ISO9001:2008 certified• * ISO9100 Rev D * ( July 2018)• 2015 Business achievement award winner


• Rapid prototype, low volume and short lead time capability• 40+ years experience in wire harness manufacture• High level of experience in defence design of complete

vehicle electrical systems• Pro-active steps for the introduction of ITAR compliance to

all relevent staff

• Highly engaged staff in the steps to NIIST defence cyper security introduction and compliance

• High level review of a dedicated defence manufacturing facility

• Highly competitive - low cost manufacturing base

DISCRIMINATORS

Tel: Email:

Adam BurgerSales ManagerAME Systems (VIC) Pty Ltd18 Gordon Street, Ararat VIC 3377 +61 3 5352 9000 [email protected]

AMPHENOL AUSTRALIA PTY LTDwww.amphenol.com.au

• The world leader in the design manufacture and supply of high performance interconnect systems for military market

• Connectors for power, signal, data, fibre optic & coaxial applications

• A supplier to all major defence programs globally for land, sea & air.

• Strong cable assembly capability with some in low cost countries.

CAPABILITIES

• BAE Systems Australia• Thales Australia• Defence• Boeing Australia

KEY CUSTOMERS• Amphenol Corporation• Amphenol Socapex• Amphenol Aerospace• Amphenol Limited

KEY PARTNERS

• ISO9001:2008


• As a supplier to all the major defence programs globally it gives us a competitive edge

• This allows us to bring this knowledge to assist you with design of your electrical systems

• Local capability for harsh environment fibre optic assemblies with experience in supply for naval applications

• Strong breadth of product range from connectors through to printed circuit board products & box builds manufacturer of not just connectors, we produce backshells & accessories as well

• Manufacturer of connectors in Stainless Steel & Marine Bronze for resistance to salt environments

DISCRIMINATORS

Tel: Email:

Stephen RichardsSales and Marketing DirectorAmphenol Australia Pty Ltd22 Industry Boulevard, Carrum Downs VIC 3201 +61 3 8796 8888 [email protected]


PRODUCTS

SERVICES

Design ● ●


ICT & Software ● ●








PRODUCTS

SERVICES

Electrical & Electronics ●


PRODUCTS

SERVICES




PRODUCTS

SERVICES

Design ●






Weapon Systems ●

17

AMTwww.ausmarinetech.com.au

• Structural Design, including FEA and Dynamic Analysis• Comprehensive Engineering Services• Mechanical and Electrical Engineering Design including

HVAC, cooling systems, lighting and power distribution• Combat System and Comms Integration and Engineering

Services

• Design for Shock, Vibration and Acoustic Integration• EMSEC compliant design and support services• Special Licence Plant assessment audits• Systems Engineering Tailored to Customer Applications/

Processes

CAPABILITIES

• Royal New Zealand Navy• Lockheed Martin• CASG

KEY CUSTOMERS

• ISO 9001:2015


• Australia’s specialist Naval Ship Design and Engineering organisation now providing support to Land Systems

• Independent Australian Consultancy• 30+ years of Naval engineering experience can be applied

to many Land Systems projects

• Unique depth of experience in Australian Defence Projects and working with CASG

• Ability to work both above and below the line to suit the best needs of a project

• Specialist in upgrades, modernisations and configuration changes

DISCRIMINATORS

Tel: Email:

Brett LongmuirBusiness Development ManagerAustralian Maritime Technologies Pty LtdLevel 17, 607 Bourke Street, Melbourne VIC 3000 +61 3 8580 2600 [email protected]

ANCA PTY LTDwww.anca.com

• Design and manufacturer of CNC Tool & Cutter Grinder machines, for grinding precision cutting tools and components

• Industry leading tool design and grinding software, which is highly advanced, user-friendly and flexible

• Wide range of quality machines capable of accurately grinding various cutting tool types, turbine blades, bearings

• ANCA has provided customised and innovative solutions for general and specific market needs since 1974

• OEM manufacturer of CNC products, including servo-motors, servo-drives, HMI, I/O devices, control systems, etc

• Integration capability with CAM software• Capability to provide custom motion control solutions

CAPABILITIES

• Boeing• Lockheed Martin• GKN Aerospace• Spirit Aerosystems

KEY CUSTOMERS• Precorp Inc.• ANCA Motion• Williams International

KEY PARTNERS

• ISO 9001• Australian Export Awards Hall of Fame 2016• Australian Export Award - Manufacturing 2015• Governor of Victoria Export Awards - Manu. 2015


• Vertically-integrated company that supports the entire manufacture process of CNC Tool & Cutter Grinder Machines

• Global market leader in CNC Tool & Cutter Grinder customised turn-key solutions

• Due to its large R&D and technology investment since 1974, ANCA has achieved several significant innovation firsts

• Export proven over 30 years, having exported 6,000+ CNC machines to over 50 countries

• Global support network of Sales, Applications and Service throughout the Americas, Asia, Europe and Australasia

DISCRIMINATORS

Tel: Email:

Andrew RitchieProduct ManagerANCA Pty Ltd25 Gatwick Road, Bayswater North VIC 3153 +61 3 9751 7368 [email protected]


PRODUCTS

SERVICES

Design ● ●






18

ANYWISEwww.anywise.com.au

• Advanced Manufacturing ERP Systems• Additive Manufacturing Power Tracing and ERP Systems• Audit Apps• Collaboration and data visualisation platforms and services

• Program and Project Management• Integrated Logistics Support• Supply Chain Optimisation• Engineering

CAPABILITIES

• Jacobs • Dept of Defence• KBR• KPMG

KEY CUSTOMERS

• Key Partners• Mavenlink

KEY PARTNERS

• High Level Security Clearances• Integrated Digital ERP and collaboration solutions

• Valuechain Regional Partner• Mavenlink Partner

DISCRIMINATORS


PRODUCTS

SERVICES

Design ●







Tel: Email:

Adam EvansManaging DirectorAnywise Consulting Pty Ltd10 Nash Street, Brunswick VIC 3056 +61 3 9078 6938 [email protected]

AOSwww.aosgrp.com

• Autonomous air, land and maritime vehicles• Decision-making software technology that underpins

autonomy• Artificial Intelligence software technologies, and integration

with sensors

• Intelligent OPFOR, transforms manually controlled live fire targetry into an intelligent opposition team

• TacSim - Tactical operational simulator for Undersea Warfare, developed by AOS with DST

CAPABILITIES

• Australian Department of Defence• UK Ministry of Defence• Lockheed Martin Aeronautics• Equinor SA, Norway (formerly Statoil)

KEY CUSTOMERS

• RAAF, RAN and Special Operations Command• DST Group• RMIT, QUT, Melbourne, Deakin, Sydney University• Northrop Grumman Corporation

KEY PARTNERS

• iWatchDog, autonomous tactical ISR system – coordinates multiple unmanned surveillance systems on Land, Air, Sea

• IBA - Intelligent Battlespace Advisor, autonomous support for enhanced Joint Situational Assessment

• TacSim simulator used by DST Group to support the SEA1000 Program

• Our products have proven track records in defence, simulation & training, and heavy industry

• CoJACK models variations in human behaviour making virtual actors in simulations more lifelike and realistic

DISCRIMINATORS

Tel: Email:

Dr Andrew LucasManaging DirectorAgent Oriented Software Pty Ltd580 Elizabeth Street, Melbourne VIC 3000 +61 3 9349 5055 [email protected]


PRODUCTS

SERVICES






PRODUCTS

SERVICES

Design ●







Weapon Systems ●

19

• Specialised fastening systems and assembly tooling• Structural bonded fasteners and tooling• Threaded fasteners/inserts• Blind fasteners and tooling

• Specialised cutting tools• Temporary fasteners• Quick release pins and lanyards• Technical support and training

CAPABILITIES

• Boeing, Airbus, BAE Systems Australia, Sikorsky, Jetstar,• Virgin, Airflite, Marand, Quickstep,• Lovitt Technologies, Supacat, Thales Australia• Aerosonde, Trakka

KEY CUSTOMERS

• Click Bond• Cherry Aerospace• Avibank• Zephyr Tool

KEY PARTNERS

• AS9120B, BAE Systems Australia, Airbus, Boeing• LMA-PK004• Department of Defence Cage Code Z0TF6• Factory approval for key USA manufacturers


• Defence programs are our core business• Our customers see us as a trusted source of information

and support not typically offered by local distributors• Through extensive consultation, customers have access to

our vast assembly application experience

• We understand the relationship between design, procurement, production and maintenance/repair

• We offer technical support throughout the product life cycle• Certified in product training• We offer multiple solutions to maximise design options in

addition to increasing assembly efficiency and safety

DISCRIMINATORS

APVwww.apvcorporation.com

• International OEM for Military Restraints and Seatbelts for Land and Amphibious Military Vehicles

• Crash & Safety Testing, Environmental & Life Cycle Testing, Mechanical & Dynamic Testing

• Field testing with Data Acquisition and High Speed Imaging, including military applications

• Personal Survivability and Safety Testing for military and aerospace. (An ADF Priority Industry Capability, PIC)

• Helicopter, Military, Automotive and Transport Seat testing• Durability, vibration and dynamic crash for Composite

Structures, Electronics, Assemblies and Vehicles• Cargo Retention testing, vehicle accessories and fabricated

component testing• International OEM of seatbelts for Trucks, Ground Support

Equipment and Material Handling Equipment

CAPABILITIES

• ANCAP and International Automotive Companies• ADF, CSIRO, Thales Australia, Sikorsky, BAE Systems

Australia

KEY CUSTOMERS

• Australian Performance Vehicles Pty Ltd (Parent)• Humanetics and DTS for supply of test equip.• Benchmarking with a Japanese OE Auto Company.

KEY PARTNERS

• ISO/IEC 17025:2005• FIA certified Motorsport Lab• ISO9001:2015• Export Control Plan and Permits in place


• The APV Test Centre is the most advanced industrial test facility of its type in the Southern Hemisphere

• Track record in testing services for Military MRAP Vehicles and Applications

• Supports Australia’s Advanced Manufacturing sector with test programs for advanced product development

• The Test Centre is an R&D Lab supporting unique test programs with a highly experienced engineering team

• Environmental and Corrosion test programs, completed to both commercial and US Mil-Spec requirements

• Provides testing services to international standards, including FMVSS, ECE and ADR

• Track record in supporting Advanced Manufacturing, Defense and Aerospace, Rail, Truck, Automotive, and Transport

• The only FIA certified Lab within the region and ISO air-bag lab in Australia

DISCRIMINATORS

Tel: Email:

Harry HicklingManaging DirectorAustralian Performance Vehicles Pty Ltd1521 Hume Highway, Campbellfield VIC 3061 +61 3 9355 5574 [email protected]

APPLIED FASTENERS AND TOOLINGwww.appliedfastenersandtooling.com

Colin CampbellSales ManagerApplied Fasteners and Tooling Pty Ltd2607/100 Harbour Esplanade, Docklands VIC 3008Tel: +61 3 9939 8979Email: [email protected]


PRODUCTS

SERVICES




20

ATTARwww.attar.com.au

• Experienced engineers providing independent and expert advice in Materials evaluation and Mechanical testing

• Forensic failure analysis (includes determining root cause, life cycle and compliance assessment)

• Specialty testing in Acoustic Emission Monitoring of vessels and structures

• Audit Services, Document design and Tender review• Non Destructive Testing Level 3 consulting; technique

validation, procedure and specification writing & review• NDT Training in all Methods• NDT Qualification & Proficiency Testing of Personnel

CAPABILITIES

• ASC• Babcock International Group• Large Customer base throughout Australasia

KEY CUSTOMERS• Infracorr Consulting Pty Ltd

KEY PARTNERS

• NATA accredited to ISO 17025• Registered Training Organisation (RTO)• Authorised Qualifying Body (AQB) AINDT & BIND


• ATTAR is committed to the highest standard of service delivery and customer satisfaction

• Australian owned with over 30 years experience• Advance non-destructive testing techniques

• Consulting engineers specialising in materials evaluation and mechanical testing

• Registered Training Organisation (RTO) and Authorised Qualifying Body (AQB) for Non-Destructive Testing

DISCRIMINATORS


PRODUCTS

SERVICES

Design ●





Tel: Email:

Dr Adrian GrosvenorPrincipal EngineerEngineering Materials Evaluation Pty LtdUnit 1, 64 Bridge Road, Keysborough VIC 3173 +61 3 9574 6144 [email protected]

AUSTEST LABORATORIESwww.austest.com.au

• Accredited Test Laboratory covering Environmental, EMC, Electrical and Telecommunication testing

• Mechanical tests including vibration, shock, constant acceleration, impact, inclination, fatigue, static load & IP

• Environmental tests including climatic, UV, solar, salt-fog, altitude and pressure

• Airborne and structure-borne noise testing• EMC/EMI tests including radiated/conducted susceptibility

and emissions• Electrical tests including Surges, ESD and transient burst

testing• Engineering consultancy services

CAPABILITIES

• Raytheon Australia• Boeing Defence Australia• Thales Australia• BAE Systems Australia

KEY CUSTOMERS• Approval Specialist Pty. Ltd. (parent company)

KEY PARTNERS

• ISO/IEC 17025• A2LA Accreditation no. 2765.02 (Melbourne)• A2LA Accreditation no. 2765.02 (Sydney)


• “One Stop Shop” - a single source for environmental, EMC, electrical and telecommunication testing

• Formal accreditation for defence standards: MIL-STD-461,810,167,202, DEFSTAN00-35, RTCA-DO160, etc

• Defence knowledge and experience. Test engineers with over 40 years of combined experience in the defence industry

• Largest electrodynamic shaker in Aust capable of vibration & shock (classical & SRS) testing of equipment up to 2t

• Expertise in extreme and customized environmental testing• EMC pre-compliance and compliance testing for all stages

of product design• Proven track record with leading defence contractors -

Raytheon, Boeing, Thales, SAAB, BAE Systems etc

DISCRIMINATORS

Tel: Email:

Nina RodoredaSite SupervisorAustest Laboratories53 Latitude Boulevard, Thomastown VIC 3074 + 61 3 9464 4016 [email protected]


PRODUCTS

SERVICES


Engines & Drive Train ●




PRODUCTS

SERVICES

Design ●





21

AUSTRALIAN AEROSPACE ENGINEERINGwww.austaerospace.com

• CASA Part 145 helicopter Maintenance, Repair and Overhaul (MRO)

• Component MRO • Aircraft structural repair and helicopter drivetrain

alignment• Tailored aircraft refurbishment, life extension programs and

avionics upgrades

• CASA Part 21G aeronautical parts manufacturing and sheet metal repairs and fabrication

• Precision CNC machining • Painting and chemical treatment• Engineering design for modifications and repairs (CASA

Part 21M)

CAPABILITIES

• Department of Defence• BAE Systems• Pennant Australasia• QBE

KEY CUSTOMERS• Arrow Falcon Exporters• Monroe Aerospace

KEY PARTNERS

• CASA PART 145 MRO• CASA PART 21G Production Certificate• Defence Recognised Supplier (LoRS) • ISO9001 : 2015 + AS9100D / AS9110C / AS9120B


• Dedicated CASA Part 145 MRO company with extensive tooling

• CASA Part 21G Manufacturing• CASA Approved KIOWA 206B-1 helicopter fixture• OEM trained and experienced LAMEs

• CASA approved to conduct Deep Level Maintenance on medium and light platforms

• Controlled spare parts store with over 15,000 line items• Exclusive aerospace hardware distributor for Monroe

Aerospace in Australia• Strategic regional geographic location

DISCRIMINATORS

Adam JohnstonEngineering ManagerAustralian Aerospace EngineeringPO Box 459, Jindera NSW 2642Tel: +61 2 6026 2614Email: [email protected]

AUSTRALIAN AUTOMOTIVE RESEARCH CENTRE

www.aarconline.com

• Provides an extensive range of automotive testing facilities to all vehicle and component manufacturers

• Encompasses virtually all driving conditions found in Australia

• 4WD tracks, Highway Circuit, Second Class Road, Australian Design Rules Circuit, Fording Bath, Rough Course & more

• The Vehicle Validation Precinct provides facilities for truck/military vehicle testing to Land 400 specifications

• Test component and vehicle durability, suspension development, braking and traction control systems

• Test electronic stability systems, dust entry, cooling systems, chassis durability and water entry

CAPABILITIES

• Thales• Rheinmetall-MAN• Bosch• Toyota

KEY CUSTOMERS• Linfox Australia

KEY PARTNERS

• Land 400 specifications• Australian Design Rules


• The largest privately owned and independently operated automotive testing facility in Australia

• Under jointly agreed conditions, clients can construct specific test sites to suit their development work

• Ideal location for product launches, demonstrations and events

• Expert on site team to help with testing needs

DISCRIMINATORS

David KellyAARC Site ManagerAustralian Automotive Research Centre445 Gum Flats Road, Wensleydale VIC 3241Tel: +61 3 5288 7306Email: [email protected]


PRODUCTS

SERVICES

Design ●






22

• CNC turning and machining• Multi-tasking 5 axis machining• Assemblies & instruments supply programs• Quality controlled production

• Digital communication Project management• Part marking and identification• Low to high production volumes including proto types

CAPABILITIES

• Defence & Aerospace• Mining, Oil & gas• Rail• Medical

KEY CUSTOMERS• Okuma Australia & DMG Mori Seiki• Iscar Australia• ThyssenKrupp• APMGroup

KEY PARTNERS

• IAS/NZS ISO9001:2015 & BSI• AS9100 in progress


• Total management of manufacturing solutions• Full turnkey solutions• Full traceability and quality assurance• Highly qualified workforce

• Current machining technology implemented• Committed on time delivery• Lean manufacturing systems• Quick turnaround lead times

DISCRIMINATORS


PRODUCTS

SERVICES

Design ●





Weapon Systems ●

• Welding Engineering• Welding in-service inspection• Advanced Education and training for welding engineers

and trades• Research and Development

• Welding structures integrity management• Quality Assurance• Close collaboration with leading institutions: Uni of

Adelaide, Adelaide Microscopy, ANSTO and UniSA• Experience in major Defence projects: ANZAC Frigates, Air

Warfare Destroyer, Collins Class Submarine, Bushmaster

CAPABILITIES

• ASC• AWD• Santos• APLNG

KEY CUSTOMERS• University of Adelaide• ANSTO• Universtity of South Australia• Charles Darwin University

KEY PARTNERS

• NATA Acredited (#15854) to ISO/IEC 17020• Cm3 Prequalification• Approved agent for American Welding Society• Member of IMarEST


• Unique range of credentials & experience in the Australian Market

• Highly qualified mechanical and welding engineers• Highly qualified and experienced welding supervisors and

inspectors

• Australian Institution for the Certification of Inspection Personnel (AICIP) inspectors

• Lead auditors quality Safety and Environment• Welding educators certified by American Welding Society• Consultants with Australian Security Clearances

DISCRIMINATORS

AUSTRALIAN PRECISION TECHNOLOGIESwww.aptengineering.com

AUSTRALIAN WELDING SOLUTIONSwww.australianweldingsolutions.com.au

Adam SuttonBusiness DevelopmentAustralian Precision Technologies Pty Ltd26-28 Intrepid Street, Berwick VIC 3806Tel: +61 3 9768 9400Email: [email protected]

Craig WilliamsBusiness Development ManagerAWS Global Pty Ltd65 Nirvana Avenue, Malvern East VIC 3145Tel: +61 (0) 438 809 646Email: [email protected]


PRODUCTS

SERVICES

Design ● ●


Through Life Support ● ●LAND SYSTEMS CAPABILITY AREAS

PRODUCTS

SERVICES




23

A.W.BELL PTY LTDwww.awbell.com.au

• Manufacturer of complex metal components and assemblies with high mechanical properties for Defence applications

• Highly vertically integrated manufacturer of fully finished ready to use INVESTMENT and SAND CASTING

• Collaborative design for function and manufacture capability

• Rapid prototyping into metal for representative development and testing, low volume production

• Precision production MACHINING, ASSEMBLY, NDT, certification, logistics, project management

• Steels including high-strength low-alloy, stainless, duplex & super duplex stainless, cryogenic and others

• Aluminium, nickel aluminium bronze, cast irons and other ferrous and non-ferrous grades

• Size envelope to 600 X 600 X 700mm approx

CAPABILITIES

• Rheinmetall - Boxer / Land 400• BAE Systems - Sea Sparrow, Nulka and F35• Northrop Grumman - F35 EODAS sub-assemblies• Marand - F135 engine change trailer

KEY CUSTOMERS• CASG Global Supply Chain programme• CASG Joint Strike Fighter Division• Single Business Service• AIDN

KEY PARTNERS

• AS9100D, SAI Global• ISO9001, ISO14001:2015, SAI Global• 2016 - Victorian Export Award - Manufacturing• 2013 Vic. Manufacturer of the year - Medium


• Aluminium Billet Equivalent (ABEª) casting process, ultra high strength aluminium investment castings

• Rapid prototyping into metal for all grades allowing proof of concept, testing, or low volume production runs

• Experts in manufacturing complex and intricate parts in all materials

• Manufacture of high-quality nickel alloy bronze, duplex, super duplex and general stainless steels products

• Flexibility and responsiveness to changing customer needs

• Established and proven supplier of world class defence and aerospace parts (F35 Strike Fighter, Collins Class)

• Proven global export experience with long term customers in North America, Europe and Asia

• Strong, dependable and reduntant supporting supply chain

DISCRIMINATORS

Tel: Email:

Vinesh KaranCommercial DirectorA.W.Bell Pty Ltd145 Abbotts Road, Dandenong South VIC 3175 +61 3 8773 7527 [email protected]

BARTLETT MANUFACTURINGwww.bartlett.net.au

• Product Design and 3D Modelling • Synthetic Products Manufacturing• Canvas Products Manufacturing• Tents & Tarpaulins

• Vehicle & Trailer Canopies & Covers• Signature Management Covers• Storage Bags & Equipment Covers• Corrosion Protection Covers

CAPABILITIES

• Rheinmetall • Thales Group• Varley Group• Supacat

KEY CUSTOMERS• Wax Converters Textiles

KEY PARTNERS

• ISO 9001:2015 Certification• Victorian Manufacturing Hall of Fame


• Industry leader since 1956• Four purpose built factories with 8000sqm of production

floor space and four computerised plotter cutter tables• Over 30 welders comprising hot air, hot wedge, high

frequency • Over 50 computerised sewing machines for multiple

applications

• Ability for large scale and large volume projects with accuracy and repeatabilty

• Product Design and 3D Modelling • Customised QA processes meeting customer deliverables• Proven supplier of multiple products to ADF, Primes and

Sub-Primes

DISCRIMINATORS

Tel: Email:

Tim SkewesDefence Sales C.E. Bartlett Pty Ltd172 Ring Road, Wendouree VIC 3355 +61 3 5339 3103 [email protected]


PRODUCTS

SERVICES

Design ●


24

BLACK STUMP TECHNOLOGIESwww.blackstumptechnologies.com.au

• Turn-key, 100% solar powered, deployable Chillers• Turn-key, 100% solar powered, deployable Freezers• Turn-key, 100% solar powered, uninteruptable power

supplys

• Turn-key, 100% solar powered, deployable water purifiers • Turn-key, 100% solar powered, deployable mortuaries

CAPABILITIES

• Australian Defence Force - RAAF• Australian Defence Force - Army• DSTG• DFAT

KEY CUSTOMERS• Heuch Refrigeration• Able Engineering Industries• ABB

KEY PARTNERS

• ISO9001:2015 QA• Winner: 2016 Innovator of the Year - CCN-HVACR • Finalist: 2016 Land Defence Australia Industry


• Complete through-life service provider, design to decommission, for specialised refrigeration and energy systems

• Fast prototyping through to volume manufacture• Full field servicing with in-house, real time engineering

support• Haz-Op and MilSpec design and manufacturing

• 40 year history of providing solutions to Austrailan Defence Forces

• Deploy anywhere: NATO 463L air transportable units to 10’, 20’ and 40ft ISO containers plus custom units avaliable

• Operate anywhere: Onboard renewable energy systems provide 100% operation, 24 hours a day in any enviroment

DISCRIMINATORS


PRODUCTS

SERVICES






Tel: Email:

Martin OakleyBusiness Development ManagerBlack Stump Techonlogies Pty Ltd35-37 Nissan Drive, Dandenong South VIC 3175 +61 3 9793 6088 [email protected]

BUNJIL ENERGYwww.bunjilenergy.com.au

• Solar systems architecture and engineering• Solar Car Parks • Power Factor Correction• Thermal energy for refrigeration and HVAC

• EV Car Charging Stations • Electrical upgrades including HV• LED Lighting upgrades• Utility Scale Solar

CAPABILITIES

• Lendlease• John Holland • IGA Supermarkets • Mirvac

KEY CUSTOMERS• Prime Electrical & Data • Prana Energy• Shine On• Indigenous Defence & Infrastructure Consortium

KEY PARTNERS

• ISO 9001 Quality Management• ISO 45001 Occupational Health & Safety• CEC accredited design & installer• Building Code 2016


• Full end-to-end engineering, procurement and construction team

• 250 plus electricians, Master Electricians

• Exclusive thermal energy product• 10 years experience within renewables • Indigenous owned company, Supply Nation Certified

DISCRIMINATORS

Tel: Email:

Tom Small National Sales Manager Bunjil Solar and Electrical Pty Ltd568 Glen Huntly Road, Caulfield South VIC 3162 +61 1800 769 266 [email protected]


PRODUCTS

SERVICES

Design ●



ICT & Software ●





Weapon Systems ●


PRODUCTS

SERVICES

Design ●


ICT & Software ●




Weapon Systems ●

25

C4 ENGINEERING PTY LTDwww.c4engineering.com.au

• System integration of ICT Systems, Tactical Data Links, RED-BLACK Voice and data communications systems

• Cyber Security Assessment, Remediation, and Accreditation• System Integration for ICT, Voice, Data and Communications• Acoustics, Noise, Shock and Vibration design, analysis

and test

• RF System Visualisation, Modelling and Analysis for HF to SHF

• IP Data network design, VoIP, IPTV, CCTV and Videowall technologies

• Test and Evaluation Support Services including DOORS management

• Technical Training and Training support services

CAPABILITIES

• Department of Defence (CASG)• Telstra

KEY CUSTOMERS

• VoTech System Engineers and Developers• Spiral Systems• Arcord

KEY PARTNERS

• We deliver solutions to critical challenges• Expert capability in design, development and integration of

complex maritime networked systems• Expert capability in maritime structural design and analysis

• Unique international experience in Electronic Warfare, RED/BLACK design, test and system accreditation

• Defence NV1 cleared and ITAR experienced staff

DISCRIMINATORS

Rick DoblanovicManaging DirectorC4 Engineering Pty Ltd 21 Victoria St, Melbourne VIC 3000Tel: +61 (0) 406 974 007Email: [email protected]

DESIGNER | mark seggie CREATIVE DIRECTOR | alex dukcevic 26.07.13 4CP

Colours

CABLEX PTY LTDwww.cablex.com.au

• Design assistance: parts selection, installation, design, re-design for production

• Manufacturing: custom cables & harness assemblies, 3D Modelling & 3D Design, Soldering to IPC-J-STD

• Auto test solution for Transport, Telecommunications, Aerospace and Defence

• Installation: C4I fit out onsite & offsite, cable routing, termination, upgrades and retrofits

• Project management, production & global supply chain management

• Complete end-to-end solutions: provide after market services

• RF Cables / Semi Rigid / Microwave and special processes - shielding, laser marking

• EMC shielding & complex harnesses

CAPABILITIES

• Airbus Helicopters• Northrop Grumman• Rheinmetall• Thales

KEY CUSTOMERS

• Nexans• TE Connectivity• Glenair• ITT Cannon

KEY PARTNERS

• ISO 9001:2015• AS9100D - Aerospace Standard• Defence CAGE Code: Z5453• Airbus Helicopter Supplier of Year Award (2016)


• Develop-build electrical systems for harsh environments with electrical noise, EMC or electomagnetic attack

• Depth of experience in design support for manufacture across platforms and domains

• Proven low-risk supplier & exporter - awarded Airbus Helicopters Best Industrial Supplier World Wide - 2016

• End-to-End solutions including platform installation and TLS

• Experienced in power, high power, RF & semi rigid cables up to EHF, shielding and bonding for aircraft

• Global exporter with established international supply chain

DISCRIMINATORS

Tel: Email:

Tim CadmanGroup Manager, Business DevelopmentCablex Pty Ltd262 East Boundary Road, Bentleigh East VIC 3165 + 61 3 9575 3088 [email protected]


PRODUCTS

SERVICES


26

CALBAHwww.calbah.com

• Innovative Design & clever Engineering solutions to difficult issues

• 3D modeling and design optimization, FEA, structural computations and verifications

• Specialized Fabrication in carbon steel, stainless steel and aluminium, weld procedures and qualified welders

• Certified to ISO 9001 - Quality, BS OHSAS 18001 - Safety & ISO 14001 - Environment

• Plasma cutting, rolling, Brake press folding, welding TIG, MIG, SAW, Blast cleaning and painting to specification

• Full MDR including ITP’s, shop drawings, material traceability, welding maps and NDT maps

• New purpose built facility 6500m2 floor area in Dandenong South

• Experienced Site installation and commissioning team - trucks, Merlo Telehandeler, Snorkel boom lift, fork lifts

CAPABILITIES

• Sydney North West Rail Link• Sydney ANZAC Bridge• Vic Roads Monash Gantries• Melb. Desalination Plant

KEY CUSTOMERS• Calbah Industries - Australian Owned• Using Australian Steel

KEY PARTNERS

• ISO 9001:2008 Quality systems• BS OHSAS 18001 Safety systems• ISO 14001 Environment systems• Building Innovative Design Award -short listed


• Innovative design team - we develop effective solutions that work

• Senior Management have Australian security clearances• Successfully completed high demand complex government

projects• New Factory - 6500m2 floor area, 40t lift capacity cranes

• High end Fabrication in steel, stainless steel and aluminium• Experienced in ballistic steel welding with ADF approved

weld procedures• High volume capacity available with qualified and

motivated staff

DISCRIMINATORS


PRODUCTS

SERVICES

Design ● ●





Tel: Email:

Chester BakerManaging DirectorCalbah Industries17 Arkwright Drive, Dandenong South VIC 3175 +61 3 9792 3111 [email protected]

CARECOMPANY.COM.AUwww.carecompany.com.au

• Self-erecting inflatable tents with a completely inflatable frame. All supporting elements are made airtight

• Exoskeleton frame tents that allows rapid deployment. Even in rain the inner of the tent stays dry during set-up

• 40 mm aluminium frame tent impresses with simple structure and durability, for the toughest missions

• Mass Decontamination Shower made of double-sided PVC coated polyester fabric, watertight, erected in 1 minute

• CBRN Protection System, protects against nuclear, chemical and biological weapons like bacteria and viruses

• Solar power LED lighting systems for outdoor areas providing all night street style lighting - 3 year battery life

• LED indoor task lighting for all situations - solar powered with battery pod or 240 volt connectable

CAPABILITIES

• ISO 9001:2008 certified• Good design award for LED solar


• Tents manufactured since 1953, deployed in over 60 countries

• Completely customised designed solutions to suit the task

DISCRIMINATORS

Tel: Email:

Mark HollandDirectorcarecompany.com.auSuite 106, 358 Clarendon Street, South Melbourne VIC 3205 +61 (0) 422 510 551 [email protected]


PRODUCTS

SERVICES



PRODUCTS

SERVICES

Design ● ●





27

CHEMRING AUSTRALIAwww.chemring.com.au

• Manufacture of high quality Marine and Military Pyrotechnics that include screening, signaling and illumination

• Electronic Warfare and Electronic Attack Technologies• Supply of innovative route proving and clearance, CBRNE

threat detection, EOD and military demolition solutions

• Supply of Commercial Lightsticks used by Law Enforcement and Civil Defence

• Offering a range of support, maintenance, R&D, training, test and evaluation services

• Supply of specialist medium and large calibre ammunition• Repair and maintenance of OEM equipment

CAPABILITIES

• CASG• WesCom Signal and Safety• US Department of Defense

KEY CUSTOMERS• Chemring Group - UK (Parent Company)• Chemring Countermeasures (UK and USA)• Roke Manor Research (UK)• Chemring Technology Solutions (UK)

KEY PARTNERS

• ISO14001:2015 Environmental Management Systems• AS/NZ 4801:2001 OH&S Management Systems• ISO9001:2015 Quality Management Systems


• Chemring are the only producers of air-launched countermeasures deployed by Australia in the Southern Hemisphere

• Chemring Australia’s facility, is one of the world’s most advanced countermeasures manufacturing plants.

• Facility has the capability to manufacture future ADF requirements including F35 countermeasures

• Chemring Australia, through its sister company supplies land and sea countermeasures

• Chemring Australia is part of the Chemring Group, the world’s largest supplier of advanced countermeasures

• Across the globe more than 2000 people are employed over 20 sites in the US, UK, Europe and Australia

• More than 100 years experience in energetics and have built a reputation for supplying high quality products

• We maintain design, development, manufacture, testing, evaluation and support capabilities at Lara, Victoria

DISCRIMINATORS

Tel: Email:

Steve DartnellBusiness Development DirectorChemring Australia230 Staceys Road, Lara VIC 3212 +61 3 5220 8500 [email protected]

CIDER HOUSE ICTwww.defence.ciderhouse.com.au

• Internal Threat Mitigation Software• Risk assessments for establishing baseline Data Security

environment• Risk assessments for compliance with NIST, ISO27000,

NDB Scheme, VPDSS and GDPR • Solutions for compliance with NDB Scheme, VPDSS and

GDPR

• Low cost, scalable solutions from 10 to 44000 Endpoints (users/computers)

• Near-Realtime Threat Detection, reporting in minutes• Maintain forensic level information on all file movements,

available through system dashboard• Data Protection on Mobile/BYOD Devices

CAPABILITIES

• eSafe Systems Australia• Leidos Australia

KEY PARTNERS

• Provide software solutions to 12 of the 20 Controls covered in the ISM

• World’s first easy to implement and use Document Encryption and Rights Management

• Continuous, Persistent Encryption to protect data at rest, in motion and in use. Data is never unencrypted

• Encrypted environment is invisible to the user, no additional passwords or encryption keys required by users

• Realtime File Tracking monitors the location and disposition of data outside the network, anywhere in the world

• Secure and rescindable file-sharing with third parties, regardless of location on earth

• Statistically detecting and preventing 1 data breach per 100 users, per month, across global user base

• 18 years experience with over one million end-users in security, police, defence, government and business

DISCRIMINATORS

Tel: Email:

Raymond HarveyDefence BDMCider House ICT18 Diosma Way, Melbourne VIC 3082 +61 (0) 431 600 320 [email protected]


PRODUCTS

SERVICES

Design ● ●







28

CODARRA ADVANCED SYSTEMSwww.codarra.com.au

• Counter Unmanned Aerial Systems (UAS)• Unmanned Ground Vehicles (UGV)• Systems engineering/systems Integration and specification

writing (including FPS, TCD, OCD, SEMP, V&V Plans)• Specialist expertise in Land Systems including Military

Vehicles and Weapon Systems

• ICT Security expertise including IRAP and cryptographic equipment

• Test and evaluation management and consultation• Noise and vibration consultation (including Whole-Body

Vibration)• Electrical load analysis including Failure Mode, Effects and

Criticality Analysis (FMECA)

CAPABILITIES

• Dept of Defence (CASG)• Dept of Defence (Land Engineering Agency)• Dept of Defence (DSTG)• Rheinmetall MAN Military Vehicles

KEY CUSTOMERS

• ISO9001:2015 (SAI Global)• Accredited Training Organisation (APMG)


• 27 years experience working with Defence materiel acquisition

• Multi disciplinary team of consultants• Established achievements in complex Defence systems

and platforms• All consultants have a security clearance of Secret (NV1)

as a minimum

• Expertise with IBM® Rational® DOORS®• Understanding of the through life benefits of a Capability

not just the technical solution• Project Management expertise to better integrate their

activities into a project• Wholly Australian owned private company

DISCRIMINATORS


PRODUCTS

SERVICES

Design ●



ICT & Software ●





Weapon Systems ●

Tel: Email:

Mr Warren WilliamsManaging DirectorCodarra Advanced Systems Pty Ltd.Suite 403a, 480 Collins Street, Melbourne VIC 3000 +61 3 9614 7449 [email protected]

• Delivering large multi-year ICT projects with accuracy• Delivery of comprehensive ILS services• In-house Research and Development team• National footprint• 24x7 Help Desk Support

• Custom military grade Internet of Things (IoT) device - NOMAD IoT

• Elite status with Tier 1 ICT hardware and software vendors• Technical writing and illustrations - operations,

maintenance, training, OH&S etc. publications and manuals

CAPABILITIES

• Thales• BAE Systems• Department of Defence• Leonardo

KEY CUSTOMERS• Juniper Networks• Microsoft• VMware• Fortinet

KEY PARTNERS

• ISO9001:2015 – Quality Management System• ISO27007 – Information Security Management System• ISO 4801 – Work Health and Safety • Juniper Partner of the Year 2017


• Australian owned private organization capable of delivering highly complex, large projects

• Australia wide national and international presence• Flexible software and app development• Dedicated ILS practitioners and technical writers

• Years of Defence and project management experience • 80% of staff with Defence clearance levels• Highly skilled technical staff with years of experience and

qualifications• Strong relationships with Tier 1 and cutting edge

technology vendors

DISCRIMINATORS

COMMUNICATIONS DESIGN AND MANAGEMENT

www.cdm.com.au

Jeff BogensbergerGeneral ManagerCommunications Design and Management Pty LtdLevel 1, 99 King Street, Melbourne VIC 3000Tel: +61 3 9601 6611Email: [email protected]


PRODUCTS

SERVICES

Design ●


PRODUCTS

SERVICES




29

COMMUNITY CHEFwww.communitychef.com.au

• Capacity to produce up to 14 million individual extended shelf life meals (refrigerated) per annum

• Capability to produce shelf stable meals• Contract manufacturing and R&D services for the food

Industry

• Consultancy for hotel services, catering services and food manufacturing

• Ability to produce , package and supply combat ration packs in conjuction with business partners Taspak

CAPABILITIES

• Victorian Local Government• Victorian State Public Hospitals• Delivered meals services Nationally• Taspak

KEY CUSTOMERS• Regional Kitchen PTY LTD (parent Company)• BidFood• CSIRO (R&D Partner)

KEY PARTNERS

• Skin & Cancer Foundation Award 2016• Finalist 2014 Victorian Worksafe Awards• FSANZ - HACCP


• Extended shelf life for meals is acheived without the use of preservatives.

• As a social enterprise, our focus is on achieving good outcomes

• Ability to develop bespoke meals to exacting nutritional requirements in conjuction with our R&D partners

DISCRIMINATORS

Tel: Email:

Joe CiccaroneCEORFK Pty Ltd43-47 Drake Boulevard, Altona VIC 3018 +61 3 9368 5900 [email protected]

CORNELL DESIGN VICTORIAwww.cornelldesign.com.au

• Provide a low risk scalability option for Design and Engineering teams

• 35+ Mechanical and Electrical Designers between SA and Victoria

• Rapidly INTEGRATE into our client’s teams

• Work on (or off) our client’s site• Able to supply key CAD software (Solidworks, Inventor,

AutoCAD + others)• Have up-to-date hardware for efficient operation• DSS Panel Member

CAPABILITIES

• Supacat• Thales Australia• Chemring• Raytheon

KEY CUSTOMERS• Cornell Design South Australia

KEY PARTNERS

• Internally managed and audited QMS


• All our staff have a Trade Background - if we design it you can build it

• All our staff are full time employees (no contractors) ensuring we are always available and will complete the job

• Fully insured with Public Liability and Professional Indemnity Insurance

• Fully licensed software• DSS Panel Member• There when you need us....

DISCRIMINATORS

Tel: Email:

Jonathan BannisterManaging Director - VictoriaCornell Design Victoria Pty LtdA4 8 Rogers St, Port Melbourne VIC 3207 +61 3 9036 3662 [email protected]


PRODUCTS

SERVICES

Design ●





30

DANA AUSTRALIA PTY LTDwww.dana.com.au

• OEM drivetrain components• Heavy Duty Commercial, Light Commercial, Off-Highway

and Industrial• Engineering design, manufacture and compliance• Heavy Duty Driveshaft and Cardan shaft manufacture

• Latest technologies - Light weight steer axles, Spicer power Boost Hydraulic Hybrid Solution, Beltless CVT

• Supplier of industry leading Spicer components• World respected supplier to transport and industry since

1904• MOTS specific solutions

CAPABILITIES

• Ford Motor Company• Paccar Australia• Thales Australia• Caterpillar

KEY CUSTOMERS• Dana Inc.• Spicer drive-train products• Victor Rienz sealing products• Long thermal products

KEY PARTNERS

• TS16949• ISO14001• VAS approval• 2nd Stage Manufacturer plates


• Design to compliance capability• Engineering design• Heavy Vehicle Modification authority

• Bespoke manufacturing capability• Sustainment support• Warehousing and Inventory management

DISCRIMINATORS


PRODUCTS

SERVICES

Design ● ●






Tel: Email:

John RamseyBusiness Development Manager - Off HighwayDana Holding Corporation8 Hudson Court, Keysborough VIC 3173 +61 3 8779 8500 [email protected]

DARONMONT TECHNOLOGIESwww.daronmont.com.au

• Broad Systems Integration Capability - Hardware, Software, Mechanical, Security and Mobility

• Communications ESM and Direction Finding Systems• Passive and High Frequency Radar Systems design and

Engineering• Air Traffic Control and Ranges - Mobility and C2 Systems

• Link 11 and 16 Training Systems• Engineering Support to the Intelligence Community• 24/7 Support for Remote Communications and Surveillance

Systems HF Surface Wave Radar• Tactical Air Defence C2 Systems

CAPABILITIES

• Army - Deployable Planning Facility HQ1DIV• Indra - LAND154 CIED Deployable Elements• DIH - Soldier Passive Radar Systems• CASG (ESD), DST Group, ADFTA, ABF

KEY CUSTOMERS• BAE Systems, Raytheon Australia, Indra, SAAB• Zenith, Sage, APC, Extensive local Supply Chain• RSB Op K9 Assistance Dogs Programme• C4i Harris

KEY PARTNERS

• ISO 9001:2015• CASG AEO Certification for Acq and Support• Essington Lewis Trophy Winner - 2008 and 2012• Defence Teaming Centre Outstanding SME Award 2012


• Multiple platform/Domain experience (installation, integration, set to work, support)

• Proven R&D/Developmental Engineering Capability• Successful track record with CASG(ESD)/ RAAF/ Navy/

Army - Multiple award winner• ISO 9001 accredited Business System (Quality System)

• AEO accreditation - S&CSPO (MCRC Project) - Acquisition and Support

• ASDEFCON Acquisition and Support Capability Maturity• Party to multiple TAAs and ITAR ready• Proven capability to provide long term in-service support

DISCRIMINATORS

Tel: Email:

Lee StanleyBusiness Development ManagerDaronmont Technologies Pty Ltd15-23 Huntingdale Road, Mount Waverley VIC 3149 +61 3 9830 6222 [email protected]


PRODUCTS

SERVICES




PRODUCTS

SERVICES

Design ●








31

DEAKIN UNIVERSITYwww.deakin.edu.au/research/institutes-and-centres

• Universal Motion Simulators, motion platforms, flight simulators, land vehicle simulators

• Materials, carbon fibre research and manufacturing, highstrength & lightweight

• Battery technologies, advanced battery prototyping, corrosion and protection technologies

• Modelling and simulation, system-of-systems modeling, logistics systems, human performance

• Robotics and mechatronics, mobile robotics, autonomous vehicles, energy demand prediction

• Virtual reality and augmented reality, mixed reality, haptics• Tele-operation, tele-manipulation, tele-robotics• Defence mental and physical health, cognitive load

monitoring, psychology, psychiatry, exercise

CAPABILITIES

• Australian Defence Force, DSTG• Boeing Australia, General Dynamics• General Motors, Ford• ANSTO

KEY CUSTOMERS• General Motors• Ford• General Dynamics• Boeing Australia

KEY PARTNERS

• 2016 Mobility Engineering Excellence Gold Award


• Materials research, carbon fibre research• Battery technology research and development• Robotics and haptics research, prototyping• Modelling and simulation of complex and uncertain

systems

• Motion simulator and simulation technologies• Data analytics and decision support• Human movement and sports science, Medical physiology,

Neuroscience, and Exercise and nutrition

DISCRIMINATORS

Tel: Email:

Professor Saeid NahavandiPro Vice-Chancellor (Defence Technologies)Deakin University75 Pigdons Road, Waurn Ponds VIC 3216 +61 3 5227 1231 [email protected]

Creating Defence Science Research Networks for Australia

DEFENCE SCIENCE INSTITUTEwww.defencescienceinstitute.com

• Creating research networks for industry, the Defence Science and Technology Group and Victorian Universities

• Aligning research capabilities with the needs of Australia Defence

• Supporting defence industries in providing a one-stop shop to access Victorian universities’ capabilities

• Showcase R&D and innovation capabilities in the private and public sectors

• Identify and place higher degree interns into industry• Provide advice on the Defence and National Security R&D

environments (priorities, capabilities, needs and gaps)

CAPABILITIES

• Australian Department of Defence• Over 200 Australian Defence related SMEs & Prim• Victorian State Government• United States Department of Defence

KEY CUSTOMERS

• All Victorian Universities excepting ACU• Defence Science and Technology Group• Defence Materials Technology Centre

KEY PARTNERS

• Access to world class academic institutions and researchers

• Embedded researchers from DST Group and Victorian Universities

• Strong relationship with US Defense Funding Agencies• Seed funding for appropriate research initiatives• Free Service, no claim to IP created• Agile and responsive with no overheads for engagement

DISCRIMINATORS

Tel: Email:

Craig ButlerEngagement ManagerDefence Science InstituteLevel 4, 204 Lygon Street, Carlton VIC 3053 +61 3 8344 3513 [email protected]


PRODUCTS

SERVICES

Design ●



32

DEK TECHNOLOGIESwww.dektech.com.au

• End-to-end design, integration, test & support of advanced electronic systems

• Development and support for mission-critical software systems including embedded

• ASIC, FPGA and PCB design and procurement

• Distributed, real-time, fault-tolerant systems• 24/7/365 global support centre in AU• Test program development and execution• Secure Melbourne-based ICT test facility and ICT

infrastructure

CAPABILITIES

• Ericsson AB - Stockholm, Sweden• Boeing Defence Australia• New South Wales State Government• Telstra

KEY CUSTOMERS

• Mirantis OpenStack• Informator

KEY PARTNERS

• ISO 9001:2015


• Australian company with R&D offices in Australia, Europe and Asia

• Exporter providing a sustained commercial edge to world-leading technology companies

• Leading specialist in communications R&D• DEK Foundation – Helping Communities

DISCRIMINATORS


PRODUCTS

SERVICES

Design ●


ICT & Software ●





Tel: Email:

Patrick KlovekornProgram ManagerDEK Corporation Pty LtdCnr Riggall St Maldon St, Broadmeadows VIC 3047 +61 3 9309 1808 [email protected]

DIRECT EDGE MANUFACTURINGwww.directedge.com.au

• Prototype & product development• Laser, punch & router cut parts (Mild steel, stainless steel,

aluminium, titanium, copper, timbers & plastics• Brake press folding• Welding of mild steel, stainless steel, aluminium, copper &

dissimilar metals.

• Manual jobbing tasks that include but are not limited to drill & tap, bevelling & de-burring

• Sandblasting & chemical dipping• Powder coating, painting, galvanised plating, electro

polishing & anti corrosive treatment• Certificate of compliance from Romer & Inspecvision

quality systems

CAPABILITIES

• CAT • Taylor Bros• Mader International• Incat Tasmania

KEY CUSTOMERS• Bluescope Steel Australia• Maltec Engineering• Capral Aluminium• Headland Machinery

KEY PARTNERS

• ISO 9001:2008• ISO 14001:2004• AS/NZS 4801:2001• BS OHSAS 18001:2007


• Australian owned & operated, Direct Edge Manufacturing distribute high quality Australian made products worldwide

• Full range of services provided from receipt to despatch of order

• Deliver an extensive range of solutions to all industry sectors & Offer low to high volume production

• Latest CNC automated technology ensures reduced lead times & guaranteed precision

• Diverse range of finishes include painting, powder coating, galvanised plating, engraving or electro polishing

• Quality certificate of compliance provided with Romer & Inspecvision quality systems

• Dedicated R&D & continuous improvement teams• International Welding Specialists onsite & ISO 3834-2

DISCRIMINATORS

Tel: Email:

Diane EdgertonCEODirect Edge (Tas) Pty Ltd53 Strahan Street, South Burnie TAS 7320 +61 3 6434 0500 [email protected]


PRODUCTS

SERVICES







PRODUCTS

SERVICES







Weapon Systems ●

33

DMTCwww.dmtc.com.au

• Foster enduring collaborative relationships between industry, research organisations, industry bodies and Defence

• Support Australian defence industry to reach global competitiveness benchmarks, higher levels of productivity and defence-readiness

• Reduced technology development time to market and reduced investment required from Defence through our collaborative, co-investment model

• Ensuring expertise of Australian research sector is diffused into the defence industry through applied R&D and industrially-relevant research

CAPABILITIES

• Australian Department of Defence (Army Headquarters & Force Design Division)

• State Governments and defence industry associations• Thales Australia• BAE Systems Australia

KEY CUSTOMERS• Defence Innovation Hub & Defence Science and Technology

Group• Australian Universities, CSIRO & ANSTO• Australian industry supply chain participants• Capability Acquisition and Sustainment Group, Diggerworks

& Program Offices

KEY PARTNERS

• ISO 9001:2015 accredited quality management and business system

• Safeguarding Australia Eureka Prize• Award-winning approach to program development, project

management and delivery• Defence Industry Security Program


• Integrated supply chain approach to technology development to ensure rapid adoption and transfer of technology

• Involvement of Defence customer in all projects ensures relevance of project outcomes

• Industry-led approach to projects ensures collaborators are outcome-focused.

• Active in all states across Australia, enhancing Defence capability through collaborations with innovative industry and research partners

• Award-winning program management and project oversight models, including management of Intellectual Property

• Breadth and depth of materials and manufacturing technology capability

DISCRIMINATORS

Tel: Email:

Miles KenyonProgram Development ManagerDefence Materials Technology Centre Ltd.Level 2, 24 Wakefield Street, Hawthorn VIC 3122 +61 3 9214 4447 [email protected]

DON KYATT SPARE PARTSwww.donkyatt.com.au

• Automotive Replacment Parts Supplier/Manufacturer• 40,000+ Part numbers in stock• Head Office in Melbourne, plus our own warehousing/stock

holdings in every State/Territory throughout Australia

• Terrain Tamer 4wd - Full Range• Flashlube - Full Range

CAPABILITIES

• Business formed in 1969• Massive warehousing/stock holdings for successful fill rate

to deliver in full and on time

• Warehouses in 9 Australian locations and 5 International, promotes convenience and customer support

DISCRIMINATORS

Tel: Email:

Dale HadfieldBusiness Development ManagerDon Kyatt Spare Parts245-247 Sunshine Road, Tottenham VIC 3012 +61 3 9325 9700 [email protected]


PRODUCTS

SERVICES





Weapon Systems ●

34

DRAEGER AUSTRALIA PTY. LTD.www.draeger.com

• Engineered Systems (Breathing Gas, Compressors & Collective Protection)

• Portable & Fixed Gas/Flame Detection Solutions (TIC & CBRNE)

• Breathing Apparatus & Emergency Escape Devices (OCCABA & ELSRD)

• Respiratory & Personal Protective Ensembles (TIC, CBRN & Fire)

• Open / Closed-Circuit Diving Systems & Equipment (SCUBA & CCUBA)

• Medical - Patient Monitoring, Ventilation, Anaesthesia & Work Place Infrastructure

• Thermal Imaging Cameras & Breath Alcohol / Drug Testing Solutions

• Australian / International Through Life Sustainment & Support

CAPABILITIES

• CSAG & Associated Domains • NZ Ministry Of Defence • Key Oil, Gas & Mining Company’s• Every State Fire Service (Australia)

KEY CUSTOMERS• Drägerwerk AG & Co. KGaA (Parent)• Australian Industry & Defence Network

KEY PARTNERS

• ISO 9001:2015• ISO 13485:2012• NATA Accredited Laboratory• ISO 14001 & 18001


• Original Equipment Manufacturer (OEM) • Over 125 Years Of Continues Research & Development• Significant Australian Sustainment & Support Capability• Physical Footprint In Every State In Australia • In House Design, Testing & Development Capability’s

• National Australian / International OEM Service Network • Australian Logistics & Warehousing (Melbourne/Perth) • Full Owned Subsidiary Of Drägerwerk AG & Co. KGaA

(Germany)

DISCRIMINATORS


PRODUCTS

SERVICES

Design ●







Tel: Email:

Daniel McGregorSegment Manager Draeger Australia Pty. Ltd.8 Acacia Place, Notting Hill VIC 3168 +61 1800 372 437 [email protected]

DVR ENGINEERING PTY LTDwww.dvrengineering.com.au

• 32 Axis CNC Laser Pipe Cutter – 400mm dia. (15M feed in/out). All grades and Sections

• 5 Axis CNC Machining Centre 8M x 4.5M x 2M Plus 20 CNC Machining Centres

• 8 Axis CNC Pipe Bending Machine- 101mm dia• CNC Laser Cutting up to 6kW 12m x 2.5m • 6 axis CNC Robotic welders with 2016mm reach, +/-0.04

repeatability with turning tables

• CNC Brake Presses (15) with capabilities of up to 8 Axis, 1000 Ton & 8M capacity

• Traditional & Portable CMM with touch probe and 3D Laser scanning to facilitate reverse engineering capability

• Wet Spray Painting & Powder Coating with Oxsilan Pretreatment & Baking Oven facilities

CAPABILITIES

• THALES Australia• BAE Systems Land and Maritime• Department of Defence (CASG)• Telstra

KEY CUSTOMERS• Bisalloy• OneSteel• BlueScope• ThyssenKrupp

KEY PARTNERS

• ISO 9001:2015, Quality Manageme• ISO 14001:2015, Env Mgt Systems Certification• ISO/IEC 17025:2005 (Testing Laboratories)• Inducted to Victorian Hall of Fame


• Customer Design Support• Certified Welders• Unigraphics & PEPS CAD/CAM Systems• ‘M1’ ERP System• Prototype to High Volume Manufacture

• 28 years experience• Business Management System Certified to International

Standards• Subsidiary (AAI Pty Ltd) with NATA accredited Ballistics &

Mechanical Testing Facility

DISCRIMINATORS

Tel: Email:

Mike NikolManaging DirectorDVR Engineering Pty Ltd36-40 Maffra Street, Coolaroo VIC 3048 +61 3 9301 5500 [email protected]


PRODUCTS

SERVICES



Weapon Systems ●


PRODUCTS

SERVICES

Design ● ●






35

ENERSYS AUSTRALIA PTY LTDwww.enersys.com.au

• Global leader in batteries and stored energy solutions for military and other industrial applications

• Over 9000 employees across 32 manufacturing facilities globally

• Largest warehousing and battery assembly facility in the Southern Hemisphere (Silverwater NSW)

• Warehousing, technical, sales and service support Australia-wide

CAPABILITIES

• Department Of Defence Australia• BAE Systems• Rheinmetall• Supacat

KEY CUSTOMERS

• ISO 9001 (Quality Management Systems)• ISO 14001 (Environmental Management Systems)


• Wide-range of proven, trusted brands already sold into global and local defence markets

• Greatest range of commercial and military grade batteries in the market

• World-wide innovation, sales, service and support

• Provide a full range of integrated services and systems to support our products

• All products 100% quality checked before dispatch• Over $13M of inventory within local supply chain for quick

delivery times

DISCRIMINATORS

Tel: Email:

Atilla KolikRegional Sales Manager - Asia (Aerospace & Defence)EnerSys Australia Pty Ltd 309 Settlement Road, Thomastown VIC 3074 +61 3 9645 1339 [email protected]

ENVIROFLUIDwww.envirofluid.com

• Manufacturer of Environmentally safe chemicals • Quick break detergents that protect cleaning surfaces• Non-chlorinated Brake Cleaners. • Parts Washers and Paint equipment clean-up

• Safe Weapon Cleaners• Degreasers, Safety Solvents and green Specialty Chemicals• Limescale and calcium removers• Odour control

CAPABILITIES

• Defence• Penske• Glencore• ASC

KEY CUSTOMERS

• ISO 9001, ISO 14001• Defence Letter of Recognised Supply• GECA (Good Environmental Choice)• HACCP (registered food establishments)


• NATO (NSN) codified safety solvents, degreasers and specialty chemicals that enhance wash-down systems

• High flash point brake cleaners that reduce explosion risks• Green’ bio-based degreasers that reduce waste disposal

costs

• Super concentrated chemicals that reduce chemical inventory

• Environmentally safe specialty chemicals that protect cleaning surfaces

• Quick break detergents safe for grey and black water systems

DISCRIMINATORS

Tel: Email:

Lorraine JohnsonNational Defence ManagerEnvironmental Fluid Systems39 Coghlans Road, Warrnambool VIC 3280 +61 1800 777 580 [email protected]


PRODUCTS

SERVICES

Design ● ●




36

• Fire Protection Technologies (FPT) is an Australian owned fire company focusing on Special Hazard Applications

• Design & Supply of Spectronix Fire Detection and Suppression Systems for Armoured and Tactical Vehicles

• Design & supply of low, intermediate, high pressure & hybrid Water Mist Systems

• Design & Supply of ProInert, FM200, Novec & Carbon Dioxide Gaseous Fire Suppression Systems

• Supply fire fighting Foam Concentrates, Foam Delivery & Foam Proportioning Systems and Foam Hardware

• Explosion Venting & Pressure Relief, Explosion Suppression Systems & Spark Detection and Extinguishing Systems

• Flame Detection, Video Imaging Detection (VID), Thermal Imaging & Aspirating Smoke & Gas Detection

• Linear Heat Detection Digital, Fibre Optic & Micro Chip & Fire Suppression Control Systems

CAPABILITIES

• BAE Systems Australia for MRAP deliveries• Spanish Army for AMX30, M60• French Army, EBG, & Turkey• Other European customers Austria & Greece

KEY CUSTOMERS• Military Vehicle Systems• Spectronix Ltd

KEY PARTNERS

• FPT has a Quality In-house Assurance Program• Spectronix Ltd is an ISO 9001-2008 company


• Spectronix Armoured and Tactical Vehicle Systems• Penetration Detection: Less than 2 Milliseconds• Double Shot Operation with normal/combat modes &

average firing time of 2.5 milliseconds @ 4Amps• Cylinder operation time less than 5 Milliseconds

• Fuel Explosion Suppression in less than 10 Milliseconds• Detects fires and explosions, including ‘slow growth’ fires• SAFE System uses hermetically sealed extinguisher bottle

& valve that allow no leak & operate in 2 msec• SAFE system limits pressure shock effects below the

threshold of lung damage (0.8 bar)

DISCRIMINATORS


PRODUCTS

SERVICES

Design ●






FLUID DYNAMICSwww.fluiddynamics.com.au

• Experience: Specialising in Heat Exchangers since 1981• Design: Capability to produce Heat Exchangers for almost

every application• Manufacturing: Fully equipped Australian factory• Stock: Extensive stock of Heat Exchangers, components

and parts

• Range: Shell & Tube; Finned Tube; Plate; Coil; Brazed Plate & Bar; Custom Built

• Cleaning: Probably the biggest Ultrasonic Cleaning System in Australia

• Testing: Full testing facilities• Repair: Extensive repair facilities for all types of Heat

Exchangers

CAPABILITIES

• Penske, Thales, BAE, EPSA• Snowy Hydro, Hydro Tasmania, Origin Energy• BHP Billiton, Rio Tinto• Visy, NEC, Energy Australia

KEY CUSTOMERS• Sterling Thermal Technologies (UK)• Thermex (UK)• Sacome (Spain)

KEY PARTNERS

• ISO 9001:2008


• Over 35 years’ experience• Defence capable and ready• Capability to re-engineer & custom build heat exchangers.

Designed the transmission oil cooler for Bushmaster

• Ability to handle demanding Defence & OEM projects and one-off jobs

• Large industrial Ultrasonic Cleaning System• Currently manufacturing & supplying transmission &

transfer case oil coolers to Bushmaster

DISCRIMINATORS

Tel: Email:

John BoltonChairmanFluid Dynamics Pty. Ltd.25-27 Star Crescent, Hallam VIC 3803 +61 3 8786 4900 [email protected]

FIRE PROTECTION TECHNOLOGIESwww.fire-protection.com.au

Peter OwersBusiness Development ManagerFire Protection Technologies Pty Ltd251 Ferntree Gully Road, Mount Waverley VIC 3149Tel: +61 3 8542 8900Email: [email protected]


PRODUCTS

SERVICES

Design ● ●










PRODUCTS

SERVICES


37

GEELONG DEFENCE ALLIANCEwww.geelongaustralia.com.au

• Geelong is Victoria’s second largest city located one hour from Melbourne

• Strong advanced manufacturing and engineering expertise• Cutting edge reserach from Deakin University

• Ideal investment location for defence• Logistics and infrastructure with freight, rail, Avalon Airport

and the Geelong Port

CAPABILITIES

• Deakin University• State Government• Committee for Geelong• Local industry including Chemring, Winchester

KEY CUSTOMERS• Manufacturing and engineering• Research and development• Support services and ICT

KEY PARTNERS

• Leading defence industry community• A capable strong business environment with a positive

attitude to growth• Establised networks offering fast tracked introductions to

defence supply chain opportunities• Designated central point of contact for information and

knowledge about Geelong capability

• Proven track record in advanced manufacturing, engineering, research and development

• International maritime port and air access• Heavy rail connections to Melbourne and freight rail

network• Big city service without big city overheads

DISCRIMINATORS

Tel: Email:

Leonie SextonSenior Administration OfficerThe City of Greater Geelong100 Brougham Street, Geelong VIC 3220 +61 3 5272 5242 [email protected]

• Specialist Satellite Navigation (GPS / GNSS) Systems Engineering company. Australian owned and based in Melbourne

• GRIFFIN - leading technology in detection & geo-localisation of any jamming & spoofing interference of GPS signals

• GBAS Multi-Mode Receiver (GMMR) real-time static or dynamic monitoring of GBAS performance (accuracy/integrity)

• Multi Element Electronically Steerable Phased Antenna Array optimised to detect very weak signals

• Threats processed, CW, WBN, NBN, SweptCW, PulsedCW, Chirp Tones and/or any combination, 30MHz bandwidth

• ANZ distributor for Spirent GPS/GNSS and IMU laboratory RF simulation equipment for military platform testing

• ANZ distributor for NovAtel precision GPS navigation SAASM and Anti-Jam (GAJT) Antennas for military platforms

• Test Measurement & Analysis Services, experience and elite resources to add significant value to any ITS project

CAPABILITIES

• DST GROUP; CASG, RAN, RAAF & ARMY• CSIRO; UNSW; UniAdelaide; QUT; ACFR• DFAT; Airservices; Geoscience Aust; AIS• BAE; Thales; Boeing Insitu; Textron

KEY CUSTOMERS

• NovAtel Inc. Canada• Spirent Communications UK• DST GROUP; Australian Research Council (ARC)• UniNSW; UniAdel; QUT; GD-Nz

KEY PARTNERS

• ARC Industry Linkage Projects 2009 & 2014• DST Group Capability Tech Demo Project 2014• Australian Coal Research Project 2015


• GPSat Systems delivering complex navigations systems to Australian Defence and Aerospace Industry since 1993

• Professional team of Electrical, Electronic, Geomatic, Engineers, plus Computer and Spatial Scientists

• Leading technology for locating RFI and spoofing affecting mission critical GPS-dependant systems

• Extensive GPS/GNSS laboratory test & simulation capability including laboratory equipment and technical expertise

• Experts in Precision Vehicle 3D body Motion & Orientation (6 degrees of freedom) navigation & spatial interaction

• Experts in software development for C++ embedded systems, FPGA VHDL programming and electronic PCB design

• Expert support for NovAtel precision GPS/GNS navigation SAASM and Anti-Jam (GAJT) Antennas for military platforms

• Expert support for Spirent GPS and IMU laboratory RF simulation equipment for military platform testing

DISCRIMINATORS

GPSAT SYSTEMS AUSTRALIA PTY LTDwww.gpsatsys.com.au

Graeme HooperManaging DirectorGPSat Systems Australia Pty Ltd1/22 Aberdeen Road, Macleod VIC 3085Tel: +61 3 9455 0041Email: [email protected]


PRODUCTS

SERVICES



38

GREYSCANwww.greyscandetection.com

• World first fully automated, compact, and portable technology to bridge critical gap with current technologies

• Patented and proven technology for detection of homemade inorganic explosives with high degree of sensitivity

• High-resolution detection capabilities in a field robust, compact and portable unit

• Able to detect nitrate, chlorate and perchlorate as low as 50-100 ng

• 40 second test sequence interval, compatible with market requirements

• Complements commercially available Ion Mobility Spectrometry (IMS) explosive trace detectors

• Simple to operate and uses standard commercially available swabs & wands

CAPABILITIES

• Military, Embassies, Border Control, Events• Police, Bomb Squad, Army, Government Agencies.• Mobile and Stationary Forensic Lab Application• Cargo & Mail Screening e.g. Aviation, Rail, Bus

KEY CUSTOMERS• Federal Resources Supply Company• Trajan Scientific Australia

KEY PARTNERS

• Selected for evaluation by TSA - 2018 pending• Evaluated by Fraunhofer ICT - 2017/2016• Evaluated by German Federal Police - 2016• Trialled by Melbourne Airport - 2016


• Sets global standard for inorganic explosive trace detection and fills a critical gap in the market

• Extends the current security capabilities - enabling nitrate, chlorate and perchlorate detection in a single test

• Detection of inorganic explosives are not currently available with other ETD technologies

• Complements commercially available Ion Mobility Spectrometry explosive trace detectors

• Provides detailed on screen and PDF detection report (Electropherogram) and detection levels

• Mobile and Stationary Forensic Lab application e.g. Police, Bomb Squad and Army

• Entry point screening pass/fail application e.g. Military, Embassies, Border Control, Government Agencies, Events

DISCRIMINATORS


PRODUCTS

SERVICES



Tel: Email:

Ms Gabrielle ByarsProject ManagerGreyScan Australia Pty LtdLevel 4 543 Bridge Road, Richmond VIC 3121 +61 3 8459 6999 [email protected]

• CNC machining - Precision 2 to 8-axis CNC Turning and Milling

• Aluminium Alloy Casting - Including cast methods, tooling design and manufacture

• 3D CAD Design, Analysis, Validation and Verification

• Project management - Internal management of customer’s projects

• Pre-production and lean production management - from prototyping through to volume manufacture

CAPABILITIES

• ASC: Precision machining cyclical refurbishment• ABT: Contract manufacturing for global export• Automotive distributors of Harrop products

KEY CUSTOMERS• Adrad Group• Eaton Corporation U.S.A.

KEY PARTNERS

• ISO9001:2015 since 1995


• Harrop Engineering is a complete in-house design, development and manufacturing business

• New resources and capabilities are developed continuously

• Customers value our attention to detail, focus on accuracy, fit for purpose, quality and timeliness

• In-house Design and Manufacturing means we are agile, we can adapt to design changes quickly

DISCRIMINATORS

HARROP ENGINEERING AUSTRALIAwww.harrop.com.au

Tim HarropOperations ManagerHarrop Engineering Australia96 Bell Street, Preston VIC 3072Tel: +61 3 9474 0900Email: [email protected]


PRODUCTS

SERVICES

Design ●





PRODUCTS

SERVICES

ICT & Software ●



39

HERE TECHNOLOGIESwww.here.com

• Long-standing supplier of automotive-grade map data to 4 out of 5 vehicles globally

• On-board mobile and navigation solutions for heavy vehicles

• Ready made and maintained global enterprise mapping data for Geographic Information Systems

• Secure, on-premise mapping technologies and data• High-definition maps for automonous vehicle solutions• Positioning (GNSS, WiFi, BTLE, Cell) and tracking data and

services• Live and historic traffic data

CAPABILITIES

• Australian Geospatial-Intelligence Organisation• United States Government• Garmin• Facebook

KEY CUSTOMERS• esri inc.• Oracle• BMW, Daimler, Audi• Microsoft Bing Maps

KEY PARTNERS

• ISO9001:2015• ISO27001:2013


• Global standardised transport navigation map data for 200 countries

• Heavy vehicle network data, road slope, height, curvature and safety signals for logistics planning

• Offline data and online map services• Realtime traffic data, predictive models and historical data

archive across entire network

• Indoor map data including airports, railway stations, shopping centres, sports facilities and universities

• High accuracy, orthographic satellite imagery with overlaid street names, points of interest and cultural features

• Point of interest data• Multi-modal (car, truck, transit, pedestrian, clycling) routing

and Public Transport overlay

DISCRIMINATORS

Tel: Email:

Ross CaldowIndustry SpecialistHERE International LLC4-10 Amsterdam Street, Richmond VIC 3121 +61 3 8518 4900 [email protected]

HEUCH REFRIGERATIONwww.heuch.com.au

• Complete through-life manufacturer and service provider, design to decommission, for C.O.T.S and specialised refrigeration systems

• Full field servicing with in-house, real time engineering support

• Haz-Op and Military Spec. design and manufacture

• Personnel, equipment and electronics cooling and heating• Environment simulation test and training rooms • Redeployable solar or diesel powered HVAC and

refrigeration equipment• Air conditioning, liquid, material and process cooling• Refrigerant conversions

CAPABILITIES

• Department of Defence – DSTO Environmental Simulator & Equipment Test Chamber (Fishermens Bend, Vic)

• RAAF – Radar Oil Cooling, JORN Over Horizon Radar project (Aust wide), Air Transport -18 °C Refrigerated Tricons (Amberley, Qld).

• Boeing/Hawker de Havilland – Ultra low temp cool rooms for advanced materials manufacture, Degreaser tanks, Rocket fuel test and storage rooms (Melbourne, Vic)

• Exxon-Mobil – Haz Area Offshore Refrigeration Systems (Bass Strait), Industrial Control Room HVAC for Gas Plant (Longford, Vic).

KEY CUSTOMERS

• ISO9001:2008 QMS accreditation by SAI Global (QEC6873)• Winner 2016 CCN HVAC-R Leadership Awards for

Innovation• Finalist 2016 Land Forces Innovation Awards• Finalist 2014 Melbourne S.E Business Awards


• Proven: providing HVAC and Refrigeration solutions and service to Defence industry for over 30 years

• Complete service provider: Design, manufacture, install and service

• Local: Australian engineering. Fast prototyping to volume manufacture

• Stress Tested: Successful projects in harshest environments, including high ambient temperatures and off-shore locations, to tight operating and energy budgets

• Reliable: Lean manufacture process, mature QMS and continuous improvement philosophy

• Can do: “Can do” and “See it through” attitude

DISCRIMINATORS

Steve OakleyHeuch Pty Ltd35-37 Nissan Drive, Dandenong South VIC 3175Tel: +61 3 9793 6088Email: [email protected]


PRODUCTS

SERVICES

Design ●





40

HIDE AWAY SAFE COwww.hideawaysafe.com.au

• Globally Unique to Hide Away Safe Co• Literally the most awesome new broad spectrum security

system anywhere in the world• Made from ‘state of the art’ liquid Injected LEXAN Military

grade Polycarbonate• Successful ‘systems integration’ proven over 20 years

• Ideal as a Defence personnel’s private on board security safe

• Two interchangeable sizes with various internal configurations to suit customer’s requirements

• Customer DIY or in house installation available• Large range of steel car kits to suit most vehicle types

CAPABILITIES

• Department of Defence - MBAuP, RMMVA, Thales• Australian Border Force, AFP and State Police• Numerous government departments vehicle fleets• Justice Department Vic - Sheriffs Fleet

KEY CUSTOMERS• MBAuP• RMMVA• Thales• ASSA Abloy

KEY PARTNERS

• COTS 2008, MOTS 2011 Defence Approved Supplier• NATO (NCAGE) Code Z0MY0• DMO LoRS certification• AS/NZS ISO9001:2008 Cert #17101201 Lic #Q0171

• COTS 2008, MOTS 2011 Defence Approved Supplier• NATO (NCAGE) Code Z0MY0• DMO LoRS certification• AS/NZS ISO9001:2008 Cert #17101201 Lic #Q0171


• Australian designed, owned and made MOTS products. Manufactured by an SME rural family business

• Global leader in ‘Security Portability’ proven over 25 years within Government, Corporate and Defence

• One of Defence’s long term ‘systems integration projects’ 2008 through to 2035

• Designed and built with a minimum 50 year life cycle with minimal ‘through life cost’

• Relocatable from one Docking Station to another. Single Hide Away Safe - multiple secure locations

• Lightweight, virtually indestructible, easily concealed & used, installed in minutes and relocated within seconds

• Can be used by hand, in transit or locked down or all three• Defence Recognised Supplier Land 121 3A, 3B, 5A

DISCRIMINATORS


PRODUCTS

SERVICES

Design ●





Weapon Systems ●

Tel: Email:

David JacksonPrincipal DirectorHide Away Safe Securities Pty Ltd240 Stamps Lane, North Wangaratta VIC 3678 +61 3 5721 9040 [email protected]

HOLMWOOD GROUPwww.holmwoodgroup.com.au

• Design & Manufacture Aircaft Refuelling Vehicles & Equipment

• Design & Manufacture Advanced Special Purpose Vehicles

• Design & Manufacture of Dangerous Goods Tanks/Tankers• Repair & Refurbishment of Refuelling Vehicles & Equipment• Maintenance of Refuelling Equipment & Equipment

CAPABILITIES

• Viva Energy (formerly Shell Aviation)• Exxon Mobil• Australian Defence Force• Toll Transport

KEY CUSTOMERS• Holmwood Highgate (Aust) Pty Ltd• Hockney Engineers• Alfons Haar Australia

KEY PARTNERS

• Avetta Supply Chain Management• SLP Testing Accreditation• VicRoads Vehicle Tester• Member of AIDN


• Australia’s longest running tanker manufacturer• Capabilities spanning all manner of specialist vehicle body

design

• Efficient designs based on modulkar variations of standards to deliver bespoke results

DISCRIMINATORS

Tel: Email:

Alan NealAviation Product ManagerHillington Close Pty Ltd425 Fitzgerald Road, Derrimut VIC 3030 +61 3 9936 0360 [email protected]


PRODUCTS

SERVICES

Design ●


ICT & Software ●




PRODUCTS

SERVICES

Design ● ●






41

HYDACwww.hydac.com.au

• Local design and manufacturing facility• Current supplier of the Army, Navy, and Airforce (ground

equipment)• Current supplier of Defence ships worldwide through

KRAEFT and military test rigs though HYCOM

• Products with MIL-SPEC suitable for ground and onshore and offshore equipment

• Products & services under quality systems certified in accordance with ISO 9001:2008

CAPABILITIES

• Collins Class Submarines (UK Defence contractor• HMAS ADELAIDE (Australian Defence contractor)• BARRACUDA SUBMARINE (French Defence contractor)

KEY CUSTOMERS

• HYCOM

KEY PARTNERS

• ISO 9001• ISO 14001• ISO 18001• ISO 29001


• Worldwide approvals• Engineering advice• Bespoke design & drawings• On-site reliability audit program• Cleanliness solutions for oil & fuel

• Oil analysis & calibration service in our own Laboratory & Calibration Centre of Excellence

• Quick product availability with branches located close to you

• Hands-on technical training

DISCRIMINATORS

Tel: Email:

Peter AgiusNational Sales and Marketing ManagerHYDAC Pty Ltd109-111 Dohertys Rd, Altona North VIC 3025 +61 3 9272 8907 [email protected]

IDEATION PRODUCT SOLUTIONSwww.ipsol.com.au

• Electronic / Industrial design - specialising in small, often handheld products

CAPABILITIES

• Australian Army• DST Group

KEY CUSTOMERS

• DST Group• University of Queensland

KEY PARTNERS

• Proven track record in taking innovative designs from concept through production and field deployment and service.

• Work collaboratively with key Defence clients and academic institutions.

DISCRIMINATORS

Tel: Email:

Colin HowardManaging DirectorIdeation Product Solutions Pty Ltd2 Highbury Road, Burwood VIC 3125 +61 (0) 412 421 333 [email protected]


PRODUCTS

SERVICES





42

INFOSYS PORTLANDwww.infosysbpm.com/portland

• Largest specialist Procurement and Supply Chain consultancy in Asia Pacific

• Our services include advisory (incl. procurement strategy) and delivery services (incl. tender facilitation)

• Over 100 consultants based in Australia with experience in high value, complex procurement and tendering

• A$10B spend addressed with savings of 8-11% delivered

CAPABILITIES

• Federal and State Governments• Top 200 ASX listed companies• Defence prime contractors

KEY CUSTOMERS• Australian Industry and Defence Network• Industry Capability Network (ICN)• Chartered Inst. of Procurement & Supply (CIPSA)• Supply Chain and Logistics Association of Austr

KEY PARTNERS

• Multiple CIPSA client awards• Procurement Industry Recognition Award


• Able to rapidly mobilise project teams to support demanding capital procurement project schedules

• Our category experts combine operational experience with strategy consulting toolkit and local benchmarks

• Fact based approach using best practice & proven methodologies that deliver high quality, sustainable outcomes

• We deliver robust and commercial outcomes in an accelerated timeframe under strict governance model

DISCRIMINATORS


PRODUCTS

SERVICES


Sid PrakashSenior ManagerPortland Group Pty LtdLevel 6, 818 Bourke St, Docklands VIC 3008Tel: +61 (0) 451 707 303Email: [email protected]

INNOVATIVE SECURITY AND DATAwww.innovativesecurityanddata.com.au

• Remote Asset Management for Security and Workplace Health and Safety Risk Management of Mobile and Fixed Assets

• CCTV Systems Design and Installation• Alarm Systems with Video Verification

• Mobile Asset Tracking for Fleet and Plant Equipment• Access Control Systems• 24/7 Video Control Room• Virtual Guarding Service• National Service, Maintenance and Monitoring

CAPABILITIES

• Reece Group Australia• Western Port Water• Pennant Australasia• Metalflex

KEY CUSTOMERS• Visium Video Control Room (major supplier)• ICT Protege (major supplier)• Rapid Global (major supplier)• BTICINO (major supplier)

KEY PARTNERS

• National Security Master Licences • ASIAL Membership• ISO 9001 Compliant


• Remote Asset Management for Security and Workplace Health and Safety Risk Management of Mobile and Fixed Assets

• Lone Worker and Remote Site Specialists • Video Verified Alarm Monitoring

• Building Automation Process Specialists for improved Security Performance and Environmental Impact Reduction

• Full Integration into Rapid Global WHS and Contractor Management

DISCRIMINATORS

Tel: Email:

Scot LeslieNational Sales ManagerInnov8tive Systems Pty LtdFactory 6, 11 McLellan Street, Bayswater VIC 3153 +61 1300 723 308 [email protected]


PRODUCTS

SERVICES

Design ● ●









PRODUCTS

SERVICES

Design ● ●




43

INTEGRA SYSTEMSwww.integrasystems.com.au

• Product Design Engineering, including Industrial Design and Mechanical Engineering - Concept to Prototyping

• Design for Manufacture (DFM), design for easy deployment, design for sustainability, design for reduced on-costs

• Prototyping - Rapid prototyping, 3D printing, applied manufacturing prototyping

• Project Management of key network of local and global suppliers for complete solutions

• Flexible light metal in-house manufacturing facility• Punching processes, including Integra’s in-house designed

and built ‘Punch-IT Coil Line’• Laser cutting, servo electric bending, notching, fastening,

welding powdercoating and assembly• Integra will make your vision real

CAPABILITIES

• Defence and emergency response vehicles• Public transport infrastructure• IT and Electrical enclosures an infrastructure• Merchandising and customer information systems

KEY CUSTOMERS• Ironside Defence and Mining• Design Synergy• Synergy

KEY PARTNERS

• ISO 9001 Quality Assuranced• Vic Man Hall of Fame Business of the Year 2013• Lifetime Achievement Awards - 2011 - 2014• NBAA Enterprise & Innovation Award 2012


• Strong and clear design philosophy• 25 Years experience• 100% Australian owned family business• Award Winning Enterprise

• We empower our clients through design• We empower our clients through execution• We have deep knowledge, insights and experience• Innovation is in our blood

DISCRIMINATORS

Tel: Email:

Paul HughesManaging DirectorIntegra Systems Pty Ltd197 Northcorp Boulevard, Broadmeadows VIC 3047 +61 3 9359 3133 [email protected]

• Defence Land and Vehicle Systems product development specialisation

• Capability and Requirements Development• Concept development, advanced Computer Aided Design

(CAD) & Engineering Analysis (FEA)• ILS and Technical Documentation and Publications

• FP-ECM, C4I, Land EW, Weapon Systems & Sensors Integration

• Virtual Product Development, Prototyping, Testing, Production

• Training & Through-Life-Support• Container and Module Lifting and Leveling Systems

CAPABILITIES

• Department of Defence (various SPOs)• RPDE and CASSS and DSTG Panels• Emergency Services and Government Agencies• Global Defence Primes

KEY CUSTOMERS• GH Varley• Haacon• Logistic Engineering Services

KEY PARTNERS

• Approved Engineering Establishment• ISO9001:2015 accredited• Defence Approved Supplier (Strategic)• Winner DMO/ADM Industry Team of the Year


• Proven continuous successful delivery of Defence special projects and systems integration

• Track record of delivering Engineering solutions and all associated PM, technical data and ILS documentation

• Highly skilled and Security Cleared professional engineers, project managers and technicians

• Australian owned, extensive knowledge of Defence customer and capable of rapid response

• Proven Project Management and Systems Engineering processes

• Workshop facility capable of handling vehicles up to large trucks/light armoured vehicles

• In-house advanced Computer Aided Design and Engineering (CAD/ CAE / FEA) , Laser Scanning and prototyping

• Current Defence contracts and standing offer panel membership

DISCRIMINATORS

INTEGRATED DESIGN & ENGINEERING SOLUTIONS P/L (IDES)www.ides.com.auStuart MorseGeneral ManagerIntegrated Design & Engineering Solutions P/LUnit 5, 2-4 Federation Way, Mentone VIC 3194Tel: +61 3 8551 2000Email: [email protected]


PRODUCTS

SERVICES

Design ● ●








44

INTERCHEM PTY LTDwww.interchem.com.au

• Military Specification Greases, Lubricants & Oils• Multi-Purpose Greases• Engine, Gear Box, Transmission, Instrument & Weapon Oils• Turbine & Piston Engine Oils

• Hydraulic Fluids• Corrosion Preventers, Icing Inhibitors, Coolants, Fuel

Additives• Specialty Lubricants & Additives• High Performance Dielectric Fluids

CAPABILITIES

• Australian Defence Force• Turbomeca; Australian Aerospace• Industrial, construction, automotive, mining• Specialty lubricants markets

KEY CUSTOMERS• Nyco S.A. (France)• Arkema (France)• Sasol Wax (Germany)• Moresco (Japan)

KEY PARTNERS

• ISO 9001:2015• Defence Recognised Supplier


• Supply contract with Australian Defence for 20 years• Unrivalled ability to source specialty products• In house formulating

• Proven track record with service and delivery in full on time

DISCRIMINATORS


PRODUCTS

SERVICES




Tel: Email:

David SewellGeneral ManagerInterchem Pty Ltd20 Harper Street, Abbotsford VIC 3067 +61 3 9270 9600 [email protected]

INVENIO PTY LTDwww.invenio.com.au

• Proposal development: improved program definition = well informed capabilities vs. cost decisions to achieve goals

• Agencies, primes & suppliers collaboration to bid and deliver winning programs, on time and within budget

• Configuration & Definition management: Manage documentation for platform configuration & explore best alternatives

• Digital Transformation= Dassault Systemes Reseller: CATIA, SolidWorks, 3DEXPERIENCE Platform

• Business Process Analysis /Re-engineering, Reverse Engineering, Workflow, 3D Visualisation, Process Automation

• ITAR data management support, IP management & control, risk management, lean engineering, consultancy

• CATIA: 3D design (complex assembly), ENOVIA: Collaboration, PDM, data management, BOM software, services, training

• Engineering recruitment, Business Services: CAD/ CAM design, modeling, drafting, CAE/ FEA, GD&T,Project Management

CAPABILITIES

• Royal Australian Navy - PLM support & training• DOD, CASG, LEA, DST Group, Land Systems-PLM services• Rheinmetall Defence - PLM & training• NGA - PLM support & training. RUAG, Cablex etc

KEY CUSTOMERS

• Dassault Systèmes• Submarine Institute of Australia• Australian Association for Unmanned Systems• Australian Automotive Aftermarket Association

KEY PARTNERS

• ISO 9001:2008• Defence Restricted Network (DRN)• Dassault Systemes V5, V6 certified Partner• Dassault Systemes Certified Education Partner


• Supporting CASG projects/ Navy Platform Systems including ANZAC, Collins, LHD, ACPB, AWD

• Scenario-based training:Real-time Engineering Fleet training Interactive Naval Environment for DNPS

• Market leaders in IP Control, ITAR management, Program & Configuration Management, Certification for Defence

• Key supplier in Defence market, to DOD & CASG for more than 20 years

• Proven technology applications to Royal Australian Navy, US Army, Defence & Space Korea, SAAB, BAE

• Dassault Systèmes certified Education Partner & Industry Solutions Partner (CATIA, ENOVIA, DELMIA, 3DEXPERIENCE)

• In-house capabilities for CAD design, modeling, engineering simulation (CAE), project implementation and support

• 15+ years preferred supplier to aerospace & automotive clients, global network of highly qualified candidates

DISCRIMINATORS

Tel: Email:

Maxime KeraultHead of Sales Invenio Pty. Ltd.Level 4, 37-41 Prospect Street, Box Hill VIC 3128 +61 3 9896 8888 [email protected]


PRODUCTS

SERVICES


ICT & Software ●



Weapon Systems ●


PRODUCTS

SERVICES

Design ●


ICT & Software ●



45

ION SYSTEMSwww.ionsystems.com.au

• Distributed edge compute wearable devices • Wearable device to measure fatigue levels and physical

performance

• Mesh networking• Machine Learning• Improve situational awareness

CAPABILITIES

• Looking for development partner

KEY CUSTOMERS

• Airservices Australia

KEY PARTNERS

• Translate scientific research into tech based solutions• CTO is negatively vetted

• Team all have exposure to Army/operational challenges• Solutions are designed for deployment flexibility

DISCRIMINATORS

Luke HallyCEOIon Systems Pty Ltd7 Woodvale Grove, Essendon VIC 3040Tel: +61 (0) 401 787 365Email: [email protected]

JVATwww.jvat.com.au

• Risk Assurance - System Safety Program Training and Products

• Software Assurance - Lifecycle Management and Planning of Software Safety Functions

• Health and Wellbeing - Planning and Delivery of Wellbeing Programs and Seminars

• Governance and Culture - Business Continuity Planning and Management System Development

• Augmented Reality - Training and Development Solutions

CAPABILITIES

• Thales• Nova• Bombardier• NZDF

KEY CUSTOMERS

• ISO 9001:2015


• Consultants have and maintain sponsored Government Security Clearances

• Employ the Agile Project Delivery Method - value driven, highly visible and continuous stream of information

• Established International Defence clients outside of Australia

• Proven track record in complex Land and Maritime Defence platforms

• Innovative/Sustainable solutions - Analysis Techniques/Implementation Plans/Training - More than personnel filling

DISCRIMINATORS

Dr James WhitehillDirector AustraliaJVATLevel 2 / 51 Stephenson Street, Cremorne VIC 3121Tel: +61 (0) 455 787 007Email: [email protected]


PRODUCTS

SERVICES

Design ●






46

L3 TECHNOLOGIESwww.L3T.com

• Integrated Communications Systems• Integrated EO/IR and electronic targeting, surveillance and

mission management systems• RF component design and manufacture• Military-grade electronics contract manufacturing

• Systems Engineering• Complex Project Management• In-Service Support• Specialist reachback to parent company

CAPABILITIES

• CASG, Australian Government• US DoD

KEY CUSTOMERS• DST Group• BAE Systems Australia• Lockheed Martin• Luerssen

KEY PARTNERS

• ISO 9001• Supplier Continuous Improvement Program (SCIP) • DST Group Achievement Award


• Supplier of Communications Management• Red/Black Voice and Data Switching• Secure Transmissions• TCDL

• SATCOM• Unattended Ground Sensors• NSA Certified Products

DISCRIMINATORS


PRODUCTS

SERVICES

Design ● ●







Tel: Email:

Dean PavlickovskiOperations ManagerL-3 Communications Australia Pty LtdUnit 12, 75 Lorimer Street, Docklands VIC 3008 +61 3 8645 2405 [email protected]

LEAN DESIGN AUSTRALIAwww.leandesign.com.au

• Early stage Concept Development - Contestability - Systems Packaging & Design + Component Design & Analysis

• Robust Business Case before Design + Affordability and Producibility & Risk Modeling before drawn in CAD

• Optimization of Product Design + Remediation to Reduce Weight & Cost + Remediation to Optimize Functionality

• Remediation to Overcome Durability and Sustainment Issues + MRL-TRL-SRL+ Producibility & Confidence Risk Indexes

• Process Optimization and Process Redesign - Manufacturing Processes + Product Development Processes

• Material and Service Acquisition Processes + Design for Service, Maintenance & Upgrade (Sustainment)

• Lean Design and Manufacturability Training + Classroom Training on Lean Design Concepts and Methods

• Workshops on Lean Design Methods & review of subsystem designs for reduction in Design complexity & cost

CAPABILITIES

• US DoD: Weapons Acq reform program• DARPA: OBVP consolidation via an IPT• BAE: Astute submarine• Elec Boat: Virginia submarine

KEY CUSTOMERS

• Munro & Associates, LLC• Design Profit, Inc

KEY PARTNERS

• Design for Manufacturability - 20-40% Cost Reduction + 50-90% reduction in Manufacturing complexity score

• Result: Lower Cost, Better Quality, less problems + 90% of program problems eliminated before they ever exist.

• Design of Product as a System: 30-50% Cost Reduction - 90% better Quality - 10-25% shorter program leadtimes

• 90% of Design changes before drawn in CAD Result: Far less problems, far lower cost, shorter timelines - less Risk

• Design of Product as an Ecosystem: 40-80% Program Cost Reduction + 20-40% shorter program development timelines

• 90% better Quality + 90% better Sustainment results + 95% better Risk Maturity Modeling & performance outcomes

• 90% better Affordability & Producibility outcomes 90% Design changes before drawn in CAD - or before you cut steel

• Result: Less problems, lower cost, shorter timelines, less Risk + more Affordable programs for your customers

DISCRIMINATORS

Gary StewartManaging DirectorLean Design Australia Pty Ltd2 Benjamin Drive, Lara VIC 3212Tel: +61 (0) 400 888 186Email: [email protected]


PRODUCTS

SERVICES



PRODUCTS

SERVICES


47

• Integrated Logistic Support• Level of Repair Analysis• Logistic Support Analysis Records• Logistic Support Analysis

• Reliability Centered Maintenance• Failure Modes, Effects and Criticality Analysis• Training Needs Analysis, Design, development and delivery• Technical Documentation

CAPABILITIES

• BAE Systems• Capability Acquisition and Sustainment Group• Varley

KEY CUSTOMERS• Nova • Nioa

KEY PARTNERS

• AS/NZS 9001:2015• ADM Essington Lewis Trophy 2009• DMO/Industry Team of the year Award 2009• Defence Industry Security Program


• Over 35 years of Defence and Industry Knowledge and Experience in ILS

• Innovation through application of technology• Specialist software supporting ILS• Quality Certified

• Specialist in delivery and management of LSA and LSAR• Extensive experience in data conversion services and tools• Transparency and reliability of service• Cost Competitive

DISCRIMINATORS

LUNA NAMEPLATE INDUSTRIESwww.lni.com.au

• LNI is a manufacturer of Australia’s largest range of branding and identification solutions

• Products include metal nameplates, self-adhesive labels, 3D domed & chrome badges and graphic control panels

• In-house printing capabilities include screen printing, digital printing and 3D printing

• Metal processing capabilities include anodising, etching, blanking, forming, punching, serialising and embossing

• Robotic assembly• Full in-house design capability• In-house tooling manufacture

CAPABILITIES

• Department of Defence• Rheinmetall-MAN• Milspec Manufacturing

KEY CUSTOMERS

• IATF 16949• ISO 9001• ISO 14001


• Over 50 years experience in supplying major markets, including automotive, whitegoods and defence

• Full support manufacturer - design and validation, approval sampling through to volume manufacturing

• Quality rated to IATF 16949 (global automotive standard), ISO 9001 and ISO 14001

• Approved OEM supplier to Holden, Ford, Toyota, Hyundai, Nissan, Kia, Volvo/MACK, Iveco, BMW, Mercedes-Benz

• Proven track record in working with complex applications• Experienced in working on projects well in advance of

product launch

DISCRIMINATORS

Tel: Email:

Michael SmithNational Sales & Marketing ManagerLuna Nameplate Industries27-29 Turbo Drive, Bayswater North VIC 3153 +61 3 9721 4200 [email protected]

LOGISTIC ENGINEERING SERVICESwww.les.net.au

Phil JarrattGeneral ManagerLogistic Engineering Services Pty LtdLevel 1, 7 Westside Avenue, Port Melbourne VIC 3207Tel: +61 3 8698 6400Email: [email protected]


PRODUCTS

SERVICES

Design ●



ICT & Software ●







Weapon Systems ●

48

MACKAY DEFENCEwww.mackayrubber.com.au

• Rubber and composites manufacturer of end-to-end solutions encompassing: Design, Development and Manufacture

• Two manufacturing locations: Melbourne, Australia and Rayong, Thailand

• Process types: Extrusion, Compression, Transfer and Injection Moulding

• Custom fabrication with autoclave facilities (up to 1.8 x 6 metre)

• Moulding press capacity ranging up to 1,000 tonne, capable of producing parts 2.4 x 1.5 metre

• In-house material formulation development, mixing and compounding

• In-house material formulation development, mixing and compounding

CAPABILITIES

• BAE Systems - Australia, UK and USA.• Singapore Technologies Engineering• Thales• Capability Acquisition and Sustainment Group

KEY CUSTOMERS

• Defence Science and Technology Group• ASC: Technical Support Agency (TSA)• Leap Australia• Taica (Alpha GEL Products)

KEY PARTNERS

• AS/NZS ISO9001:2015• AS/NZS ISO14001:2015• ISO/IEC17025:2005 (NATA approved Laboratory)


• Technical Services, encompassing mathematical modelling and product development - we do difficult

• Expertise in rubber compound development, tailored to specific applications

• DISP members and ITAR/EAR compliant with approved secure manufacturing facility

• Key employees vetted by Australian Government Security Vetting Agency (AGSVA)

• Unique materials from globally sourced suppliers e.g. aeronautical grade materials: ablatives, pre-preg, and adhesives

• Advanced manufacturing and assembly in environmentally controlled facility

• Specialist equipment: NATA certified laboratory, Rubber Processing Analyser (RPA) and 3D laser non-contact scanning

• Experienced Defence Exporter: USA, Singapore, and the UK

DISCRIMINATORS


PRODUCTS

SERVICES

Design ●









Weapon Systems ●

Tel: Email:

Olaf AlmSales Manager - DefenceMackay Consolidated Industries Pty Ltd260 Chesterville Road, Moorabbin VIC 3189 +61 3 9555 6500 [email protected]

MACRO RECRUITMENTwww.macrorecruitment.com.au

• Recruitment services for Defence skills including Engineers, IT, Scientists (STEM) , defence cleared and trades

• Labour hire• Outsourced project managed teams

CAPABILITIES

• CASG• DSTG

KEY CUSTOMERS

• Perform Zone

KEY PARTNERS

• Servicing Defence, primes and SME suppliers for over 29 years

• Access to largest network of defence contractors• Connected to over 15% of Australia’s work force

DISCRIMINATORS

Tel: Email:

Daryl KeeleyDirectorMACRO Recruitment Australasia183 Burwood Road, Hawthorn VIC 3122 +61 3 9573 1500 [email protected]


PRODUCTS

SERVICES

Design ●








PRODUCTS

SERVICES


49

MANTRA GROUPwww.mantrahotels.com/

• 130+ hotels in Australia across all major cities and many regional locations

• 5 brands - Mantra, Peppers, Art Series, Tribe, BreakFree• Both apartment and hotel style products ranging from 3.5

star to 5 star luxury hotels

• Full service accommodation providers, ideal for short or long term requirements

• Conferencing space available across many Mantra Group hotels

CAPABILITIES

• Confidential due to privacy

KEY CUSTOMERS

• Mantra• Peppers• Art Series Hotels• BreakFree

KEY PARTNERS

• Mantra Group has a dedicated Live@ long stay program ideal for project travel, relocations etc

• Discounted defence corporate rates available for short, long-term, project or group travel upon request

• Proven expereince in the defence industry with a dedicated Mantra Group national defence travel specialist

DISCRIMINATORS

Tel: Email:

Grant ArbuckleBusiness Development Manager – Defence Mantra Group222 Russell Street, Melbourne VIC 3000 +61 (0) 418 146 308 [email protected]

MARANDwww.marand.com.au

• Design, feasibility studies, specification writing, concept development

• Manufacture, systems integration, prototype development, through life support

• Complex Defence sub-assembly production• Complete turnkey production facilities set-up

• Lay-up and assembly tooling for all metallic and carbon fibre composite assemblie

• Liquid moulding tooling, resin injection and infusion systems

• Highly efficient DC Electric motors/generators• Fatigue testing equipment & training devices

CAPABILITIES

• Lockheed Martin (Source Acceptance Approval)• BAE Systems (Source Acceptance Approval)• Boeing• CEA Technologies

KEY CUSTOMERS

• AS/EN 9100C / ISO 9001, ISO 14001, ISO/IEC 170• 2014 - CIPS international procurement project of the year• 2014 - BAE UK- MAI procurement award best relationships

award• 2014 Manufacturers monthly Endeavour award -

Manufacturer of the year


• Australia’s largest proven and trusted Aerospace Tooling, Automation, Robotics, and Systems Integrator

• Designer and sole source manufacturer of the JSF F-35 Engine Removal and Installation Trailer

• Strategic second source for the Joint Strike Fighter Vertical tail production

• Largest Australian manufacturing supplier on F-35 program

• Ability to successfully manage large and diverse supplychains on complex Defence projects

• Awarded for success in completing complex technical transfer on Defence programs

• Highly successful critical path Tier 1 tooling and facility supplier on international programs

• Proven ‘Best Value’ solutions provider to international and local aerospace, defence & rail industries

DISCRIMINATORS

Tel: Email:

Alex LyonBusiness Development ManagerMarand Precision Engineering Pty Ltd153 Keys Road, Moorabbin VIC 3189 +61 3 8552 0600 [email protected]


PRODUCTS

SERVICES

Design ● ●





Weapon Systems ●

50

• Advanced Non-linear FEA Services• Computational Fluid Dynamics Services• Fluid Structure Interaction• ICT consulting services

• Configuration Management Training Services• PLM/PDM /Configuration Management software from ARAS,

Corp/Accruent Meridian - Blue Cielo ECM software

CAPABILITIES

• Cubic Defence• Defence Technology Agency• NZ Defence Force

KEY CUSTOMERS

• Matrix Applied Computing NZ• Aras Corporation, Ma, USA

KEY PARTNERS

• Performed 95% of shock qualification by calculation for NZ ANZAC Frigates

• All design work on ANZAC Frigates approved 1st time by Bhlom & Voss, Amecom and Australian Navy

• Recent shock analysis work done for Australian Army via Cubic Defence

• ITAR control for life-cycle management• Aras PLM/PDM software to manage your Digital Thread• Change management/BOM management with Aras

Innovator

DISCRIMINATORS


PRODUCTS

SERVICES





MEMKO PTY LTDwww.memko.com.au

• Provision of software and services in support of innovation, design and through life support management

• Supply, maintenance and development of ISS solutions using ENOVIA and 3DExperience PLM System

• Development and delivery of virtual training solutions using 3DVIA Composer

• Provision of engineering modelling, simulation, and system engineering software CATIA, DYMOLA and ControlBuild

• Development and delivery of Technical Publications using 3DVIA Composer

• Development and delivery of virtual training solutions using 3DVIA

• Engineering Design, Analysis and Simulation

CAPABILITIES

• DST Group• Quickstep• BAE Systems

KEY CUSTOMERS

• Dassault Systemes

KEY PARTNERS

• AS9100 Rev D• ISO 9001:2015• Dassault Systemes Accredited Solutions Partner• Dassault Systemes Accredited Education Partner


• Significant track record in supporting Australian Defence and defence primes

• Highly capable and experienced staff• Representation of Industry leading software solutions by

Dassault Systemes

• National coverage with offices in Melbourne, Sydney, Brisbane and Perth

• Internationally accredited Qaulity Management System

DISCRIMINATORS

Tel: Email:

Miro MileticManaging DirectorMEMKO Pty Ltd455 Bourke Street, Melbourne VIC 3000 +61 3 8605 7777 [email protected]

MATRIX APPLIED COMPUTING LTDwww.matrix.co.nz

Malcolm AbellBusiness Development ManagerMatrix Applied Computing Ltd521 Kooyong Road, Gardenvale VIC 3185Tel: +61 3 9596 0390Email: [email protected]


PRODUCTS

SERVICES

Design ● ●







Weapon Systems ●


PRODUCTS

SERVICES



51

• Integrated Project Management Critical Path Application• Organise, control, monitor complex projects via Time,

Resource and Cost Scheduling• Integrated EVPM as per ANSI-748-C and AS4817:2006• User controlled Multi sub-project Resource Scheduling to

ensure accurate resource allocation

• Progress Control to track, record actual achievement of work executed

• Compare Actual Cost with EV v Baseline budget• Simulate various project options and establish costs

comparisons• User defined Reporting all

CAPABILITIES

• Boeing Australia• Australian Aerospace• Dept. of Corrections RPDP• Infinity Constructions Pty Ltd

KEY CUSTOMERS• Vidotto Group of Companies• LBMS Pty Ltd• Project Planning and Support Ltd• GBA Projects

KEY PARTNERS

• Macworld Awards1985-1996Best Resource Mgt• ASC major role delivering Collins Class• PC World 1996 - Best Resource Management Sof• PC Editor’s Award - 1995 Best Project Manage


• Over 38 years proven defence capability used by the ADF on major projects

• Used in construction and delivery of Collins Class submarines

• Used for F-111 Servicing’s with EVPM to manage budget time, cost and delivery

• Used for for upgrades and servicing’s RAAF Caribou and Air ‘87

• Easy to use Logical Critical Path Network Input ; Arrow, Precedence and PERT capability

• 250 Calendars, specify overtime working with, 250 Resource Id’s and Multi Subproject Resource Analysis

• Ability to manage projects across multiple countries and contractors

• Supporters and Sponsors of ISO 21500 Project Management Standard

DISCRIMINATORS

MILSPEC MANUFACTURINGwww.milspecmanufacturing.com

• C4i vehicle installation kits. Supplied such kits to Australian Light Vehicles, G Wagons & Medium/Heavy vehicles

• Cable Harness & wire looms design, manufacture & test• Electro/Mechanical Sub-Systems. Design, manufacture and

assembly including electronics and CNC metal work• Enclosures, Racking Systems & Cabinets. Also able to fully

or partly populate with electrical/electronics

• Testing including CMM, Environmental, RF, EMC & IP• Brushless Alternators compact & light, Power Distribution

Units, Auxiliary Power Units & Exportable Power• Precision CNC Machining, CNC Sheet Metal & Fabrication

including Robotic Welding• Surface finishing including Chromate, Etching, Powder

Coating & Wet Painting

CAPABILITIES

• Rheinmetall MAN Military Vehicles – Harris Kits, Cables & Subsystems

• BAE Systems Australia - Nulka & other subsystems• Thales Australia – Vehicle Alternators & PDUs• Others: Boeing, Navistar, Polytronic & CASG

KEY CUSTOMERS

• Australian Industry & Defence Network• Australian Industry Group

KEY PARTNERS

• ISO9001:2015• AS9100 Rev D• ISO3834• IPC 610 and 620


• Wide range of in-house electro mechanical capabilities• Smallest / Lightest MIL-STD 28V, up to 900Amps

Alternators

• World wide product support & ITAR Compliant

DISCRIMINATORS

Tel: Email:

Neil MorrisonGeneral ManagerMilspec Manufacturing Pty Ltd874 Knight Road, North Albury NSW 2640 +61 2 6022 7100 [email protected]

MICRO PLANNING INTERNATIONALwww.microplanning.com.au

Raphael M. DuaCEO & OwnerMicro Planning International Pty LtdPO Box 7177, Melbourne VIC 3004Tel: +61 (0) 418 531 111Email: [email protected]


PRODUCTS

SERVICES

Design ●




52

MOOG AUSTRALIAwww.moog.com.au

• Design and manufacture of high precision motion control products and systems

• Hydraulic, pneumatic, electro-mechanical and hybrid technologies

• Din rail electronics manufacture and Product Life-cycle Management

• Through Life Support on major Defence platforms such as F/A-18, UH-60, SH-60, ASLAV, M113, M1A1, LHD, Collins

• On-site capability for service and support of power generation actuation and control

• Engineering value add services such as design, feasibility studies, specification verification and FMEA

• Logistics and Supply Chain Management of Moog’s installation base across Aerospace, Defence and Industrial systems

• On-site training facilities supporting VR and Haptic technology

CAPABILITIES

• Air: RAAF, Boeing, Cobham, NZDF, Sikorsky• Land: Army, BAE, Elbit, EOS, GDLS, NZDF, SAAB• Sea: RAN, ASC, Austal, BAE, Thales• Research: DSTG, CSIRO & University Partners

KEY CUSTOMERS

• Moog Inc and subsidiaries

KEY PARTNERS

• ISO 9001:2015• ANSI/ESD 20:20• IPC-A-610 / IPC-7711 / IPC-7721


• Design & manufacture of motion control systems for the Aerospace, Defence, Industrial, Energy & Marine industries

• Comprehensive test suites covering environmental and full system testing of electronic and mechanical systems

• Sustainment through in country assets for motion control equipment; Electronics, Pneumatics, Hydraulics and EM

• Reverse & Upgrade engineering capability of obsolete servo control systems, actuation and hardware

• Optimised purpose built facility with Lean layout, R&D labs, training facilities and secure storage

• ITAR compliant and trained workforce in secure locked down facility, including military grade surveillance

• Design, assembly and integration of simulation & test platforms (6 DOF, 4/7/8-poster, high frequency table etc.)

• A customer centric approach centered around working closely with key Government agencies and stakeholders

DISCRIMINATORS


PRODUCTS

SERVICES

Design ● ●







Tel: Email:

David MorrisDirector of Sales & Business DevelopmentMoog Australia Pty Ltd18 Corporate Drive, Heatherton VIC 3202 +61 3 8545 2110 [email protected]

MOTEC PTY LTDwww.motec.com

• DATA LOGGING SYSTEMS and analysis software for enhanced fleet management, driver training, and vehicle operations

• DIGITAL COLOUR DISPLAYS enhancing platform capability, decision support, situational awareness and future-proofing

• ELECTRONIC & ENGINE CONTROL SYSTEMS enabling a wide range of vehicle performance and capability enhancing solution

• POWER DISTRIBUTION MANAGEMENT systems enabling system integration and enhancing vehicle capability and reliability

• ACCIDENT DATA RECORDING SYSTEM enabling accident data analysis and driver behaviour and performance monitoring

• VIDEO CAPTURE SYSTEM integrates video with MoTeC data capture / analysis systems enabling performance outcomes

• CUSTOMISABLE BY SOFTWARE - all MoTeC products & systems functional capabilities are customisable MoTeC software

• Advanced electronics design and software development, & systems application and integration capabilities

CAPABILITIES

• Australian Department of Defence• Military Platforms OEMs / Primes• Motorsport Race Categories & Teams globally• Performance Cars / Vehicles OE Manufacturers

KEY CUSTOMERS• Communications Design & Management• Integrated Design & Engineering Solutions• SRX Global• Systematiq

KEY PARTNERS

• Production under ISO 9001: 2008: AU10/79616.00• Production under ISO 13485:2003: AU07/71132.00• Production under ISO14001


• Products in current military applications and service• 29 years of experience and success in developing and

applying advanced performance enhancing automotive electronic

• Established reputation for innovative, tough, & reliable capability & performance enhancing products

• Products proven in the demanding professional global motorsport environment, and military applications

• Continual significant resources commitment to R&D and product improvement, covering hardware, firmware and software

• Global Tech Support team supporting OEM activities and global network of over 190 dealers in over 50 countries

DISCRIMINATORS

Tel: Email:

Alex CaldwellBusiness Development ManagerMoTeC Pty Ltd121 Merrindale Drive, Croydon South VIC 3136 +61 3 9761 5050 [email protected]


PRODUCTS

SERVICES

Design ● ●





PRODUCTS

SERVICES




53

NEXUS TRAINING SOLUTIONSwww.nexustrain.com

• Training support - Analyse, Design, Develop, Deliver & Evaluate

• Exercise Design• Specialist Instructors & Training Teams

• Simulation Integration and Support• Policy & Procedure Development• Decision Making Training• Voice of Customer

CAPABILITIES

• Extensive Defence Experience• Joint Fires Specialists

• Australian Owned• Global Training Experience

DISCRIMINATORS

Michael ThwaitesOperations ManagerNexus Training Solutions Pty Ltd1 Joffre Road, Pascoe Vale VIC 3044Tel: +61 (0) 404 004 233Email: [email protected]

NOBLESwww.nobles.com.au

• Nobles sources, stocks, designs/manufactures/assembles, tests & distributes specialist lifting & rigging equipment

• We’ve the largest technical team in Australia for lifting/rigging inspection, crane servicing & engineering design

• Nobles supplies lifting & rigging products and services across the full defence procurement/operating value chain

• We are a trusted 100+ year old Australian owned and operated company with locations Australia-wide

• Nobles supply wire rope, strand & terminations; wire rope, synthetic & chain slings; lifting, GP & mooring chain

• We supply hoisting & winching equipment; lifting & rigging components, hardware & accessories

• Nobles supply blocks, swivels & materials handling equipment; and height safety gear

• We supply electronic load measuring systems; and load restraint & vehicle recovery devices

CAPABILITIES

• Australian Department of Defence• BAE Systems• ASC/AWD• Thomas Warburton/Rheinmetall

KEY CUSTOMERS• Bridon-Bekaert• pewag• Skylotec• PWB Anchor

KEY PARTNERS

• ISO 9001 - DLCS• ISO 14001 - DLCS• AS/NZS 4801 - DLCS• ISO 17020/25 - NATA


• At Nobles we’ve designed lifting and rigging solutions for some of the most demanding operating environments

• We a leading sub-contractor to primes on major defence projects and offer locally-sourced solutions

• Nobles products are all certified and tested in our NATA laboratories to Australian Standards

• We have the industry’s most highly qualified team of 10 specialist lifting & rigging engineers

• There is literally no lifting or lashing requirement too heavy, complex or difficult for the team at Nobles

• Nobles sources from local supply chains using Australian Grade 80 chain, eyebolts and turnbuckles

• We manufacture lifting components and equipment using Australian steel and quality local fabricators

• Nobles also import the highest quality/performance lifting/lashing products from leading global suppliers

DISCRIMINATORS

Tel: Email:

Brian VellaSales & Key Account ManagerA. Noble & Son Limited135 South Gippsland Highway, Dandenong VIC 3175 +61 3 8710 7302 [email protected]


PRODUCTS

SERVICES




54

NOVA SYSTEMSwww.novasystems.com

• Land Test & Evaluation• Verification and Validation• Electromagnetic Interference (EMI), Compatibility (EMC)

and Environmental Effects (E3)• Systems Engineering/Systems Integration

• Explosives Ordnance• System Safety• Human Factors• Logistics Engineering

CAPABILITIES

• Australian Defence Force/DST Group• Rheinmetall MAN Military Vehicles Australia• Thales Australia• Elbit Land Systems Australia

KEY CUSTOMERS• GVH Aerospace (member of Nova Group)• Auspace (member of Nova Group)

KEY PARTNERS

• ASNZS 4801• ISO 14001• ISO 9001


• Market leaders in Land Test and Evaluation• Knowledge and experience in Land capability acquisition

and introduction to service• EO Engineering and Certification with own cAEO• Australian owned private company with global reach

• Wide breadth of engagement across majority of major capability acquisition programs in Australia

• Established Nova subsidiaries in UK, Singapore and NZ exporting Nova services to Europe and Asia

• Experience in land combat and platform systems integration

DISCRIMINATORS


PRODUCTS

SERVICES

Design ●



ICT & Software ●





Weapon Systems ●

Tel: Email:

Ian LawrenceLand and Emergency Services Program ManagerNova SystemsLevel 2, 95 Coventry Street, Southbank VIC 3006 +61 3 9024 1851 [email protected]

OPEN WELDINGwww.openwelding.com

• Deliver a platform to measure weld compliance in a supply chain

• 100% measurement of desired welds and report compliance in real time or from captured data

• Non subjective, measure of welding workforce to deliver against selected welds

• Industry based training for new hires or up-skill workforce capability

CAPABILITIES

• TRJ Engineering• Air Radiators• DaRa Switchboards• Hilton Manufacturing

KEY CUSTOMERS• UTS• Bombardier Transport• ABB • Lincoln Electric

KEY PARTNERS

• 2017 ARC Grant for welding acoustic research• Deliver to ISO AS/NZ and AWS welding standards• Welding Aust committee member for ISO9696


• Digitised welding arc signatures from live audio emissions• Create portability of welding signatures

• Scientific analysis of weld quality in real time or historical

DISCRIMINATORS

Malcolm RigbyTechnical DirectorIcarus Learning7 Clapham Road, Hughesdale VIC 3166Tel: +61 (0) 403 051 180Email: [email protected]


PRODUCTS

SERVICES

Design ● ●


ICT & Software ●







PRODUCTS

SERVICES


55

PARADIGM PRESS PTY LTDwww.paradigm-press.com

• Specialist consulting services in Electromagnetic Compatibility (EMC) in Defence Systems, RADHAZ, EMF, RF.

• Technical documentation and publications, test plans, test procedures in EMC and systems engineering

• EMC training courses and workshops for C4I engineers, system integrators, project managers, technical staff

• Communications systems engineering

CAPABILITIES

• Defence industry primes and SMEs.• Construction industry primes & SMEs.

KEY CUSTOMERS

• Presentations and workshops based on extensive defence industry experience

• Unique blend of defence industry, government and academic experience

• Independent consultancy

DISCRIMINATORS

John HyneConsulting Services ManagerParadigm Press Pty Ltd6 Lauren Place, Doncaster VIC 3108Tel: +61 3 8848 0998Email: [email protected]

PENNANT AUSTRALASIAwww.pennantaust.com.au

• Engineered Training Solutions• Training Support Services• Virtual Reality• Emulation & Simulation

• Generic Trainers - Full & Part Task• Integrated Logistics Services• Integrated Logistics Software tools - OmegaPS & Analyzer• Full design & Development services for all your needs

CAPABILITIES

• Australian Defence Organisation• BAE Systems Australia• Boeing Defence Australia• SAAB Australia

KEY CUSTOMERS• Pennant International Group• BAE Systems Australia• MBDA Australia• Our customers are our partners

KEY PARTNERS

• Letter of Recognised Supply• Defence Recognised Supplier• Government Endorsed Supplier


• Expert knowledge in the design, development, and implementation of logistics and training solutions

• Global operations across Australasia, Europe, North America, and the Middle East

• Over 60 years experience delivering and supporting solutions to international defence forces and industry

• Product life cycle solutions from design requirements, integration, application, through support

• Integrated products compliant to international standards• Support of legacy training devices• Integrated customer support• In-house R&D, design, production of custom training

solutions

DISCRIMINATORS

Tel: Email:

David StephanGeneral ManagerPennant Australasia Pty LtdSuite 6, 334 Highbury Road, Mount Waverley VIC 3149 +61 3 9886 7977 [email protected]

PARADIGMPRESS


PRODUCTS

SERVICES

Design ●




56

PENSKE POWER SYSTEMS www.penskeps.com

• Penske Power Systems is a leading distributor diesel and gas engines

• We deliver power systems to the defence, maritime and land sector

• Operating in dynamic markets on- and off-highway• State-of-the-art facilities• Representing brands including MTU, Detroit, Allison

Transmissions, and much more

CAPABILITIES

• OEM• Australian Defence Land & Sea• New Zealand Defence Sea

KEY CUSTOMERS

• MTU• Detroit• Allison Transmission• Sauer & Sohn Compressors

KEY PARTNERS

• AS/NZS ISO 9001:2008• AS/NZS ISO 14001:2004• AS/ANZ 4801:2001


• Penske Power Systems works closely with the Australian and New Zealand defence, maritime and land sector

• Provide customised propulsion and power generation solutions, and life-of-type support

• Full range of diesel engines offer power from 75 to 9,000 kW

• Engines used in patrol boats, frigates and other maritime platforms, armoured and tactical vehicles

• MTU engines are known for reliability, simple operation, ease of maintenance and low lifecycle costs

• Custom ship automation systems including monitoring/control, onboard training, and maintenance

• Wide-ranging knowledge of the defence acquisition and logistic support methodology

• Proven track record of providing highly specialised and customised solutions

DISCRIMINATORS


PRODUCTS

SERVICES

Design ● ●








Tel: Email:

Roger GleesonManager Defence Programmes GroupPenske Power Systems Pty Ltd488 Blackshaws Road, Altona North VIC 3025 +61 2 8825 6100 [email protected]

PHASOR INNOVATIONwww.phasorinnovation.com

• Radio Frequency (RF) engineering design, analysis, testing, modelling and simulation

• Radiation Hazard safety assessments for personnel, ordnance and fuels to Australian and international standards

• Electromagnetic Compatibility engineering design and analysis to commercial and military standards

• EW and CIED FP ECM engineering design, analysis, measurement, modelling and simulation

• Antenna design, modelling, testing and optimisation for platforms, advanced near-field measurement

• Radio Communications, Radar and Phased Array engineering consultation services

• Co-site interference and interoperability analysis and optimisation

• Model development and validation

CAPABILITIES

• Department of Defence (CASG)• Defence Industry Prime Contractors• Defence Industry Major Service Providers

KEY CUSTOMERS

• Experts providing Radio Frequency specialist engineering for Defence and civilian organisations

• Experienced senior engineers and technical staff with extensive experience solving a diverse range of problems

• Proven track record supporting CASG and Defence Industry Prime Contractors and Major Service Providers

• Advanced Computational Electromagnetics Modelling (CEM) and Simulation tools

• Radio Frequency laboratory for testing and measurements up to 50 GHz

• Innovative solutions to technical challenges using latest tools and techniques

DISCRIMINATORS

Adam SilvesterManaging DirectorPhasor Innovation Pty Ltd155 Straws Lane, Hesket VIC 3442Tel: +61 (0) 472 685 860Email: [email protected]


PRODUCTS

SERVICES

Design ● ●





PRODUCTS

SERVICES

Design ●

ICT & Software ●





57

PHM TECHNOLOGYwww.phmtechnology.com

• Integrated Logistic Support• Mission Profile Definition• FMEA / FMECA• Reliability Allocation

• Reliability Block Diagrams• Fault Tree Analysis• Reliability Centred Maintenance• Condition based maintenance (CBM) design & validation

CAPABILITIES

• General Dynamics Land Systems (US)• US Army (TARDEC)• Pratt and Whitney (US)• NASA JPL

KEY CUSTOMERS• Siemens Industrial Software• Babcock Analytical Services• KBR Wyle

KEY PARTNERS

• SME Innovation Award (Pacific 2013)• IBM R&D Award (AIIA) 2009• Letter of Recognised Supply


• Maintenance Aware Design environment• Model-based solution (simulation)• Integrates all analysis in a single system model• Configuration Management of analysis

• Standardised engineering taxonomies• Automated report generation• Teamcenter Integration• CAD Integration

DISCRIMINATORS

Tel: Email:

Chris SteckiCEOPHM Technology Pty Ltd9/120 Queens Parade, Fitzroy North VIC 3068 +61 3 9482 2007 [email protected]

AUGMENTED REALITY PLATFORM FOR PRODUCT EXPERIENCES

PLATTARwww.plattar.com

• Augmented reality platform for visualizing and experiencing defense products

• 3D content, visualization and augmented reality delivered on consumer mobile platforms

• Augmented reality platform support for Apple iOS (ARKit) and Google Android (ARCore)

• Fully customizable and branded applications for each defense customer

• Augmented Reality platform, strategy, implementation and consulting

CAPABILITIES

• SAAB• XL Bodies • Fisher & Paykel• BECA

KEY CUSTOMERS• News Corp • Sketchfab

KEY PARTNERS

• Winner - CIO Edge Melbourne - 2017 Shark Tank • Voted Top Melbourne Startups To Watch• Closed AU$1.1mil investment oversubscribe • Air France Winner Future of Travel - Paris 2017


• First AR platform to support the entire product lifecycle - activation, visualization to service and support

• Proven track record in demonstration with existing defense manufacturers

• High definition 3D visualization of defense hardware• Australian company with all Australian technology• End to end Augmented Reality creator platform, for creating

and managing AR apps

DISCRIMINATORS

Tel: Email:

Rupert Deans CEO Plattar Pty Ltd 520 Bourke Street, Melbourne VIC 3000 +61 3 9016 3196 [email protected]


PRODUCTS

SERVICES


58

• APAS Approved Defence Coatings• Corrosion Protection Coatings

• Global Technology Leader• Local Manufacturing

CAPABILITIES

• Defence• Thales Australia• BAE Systems Australia

KEY CUSTOMERS

• ISO/IEC 17025 (NATA)• ISO 9001:2008 : ISO TS16949:2009• AS3902/ISO9002 : ISO 14001• APAS 0502 : APAS 0154


• Proven Track Record Suppling to the Australian Defence Forces

• Global Leaders In Coatings Technology

• Wealth of Experience In Defence Coatings• Local Manufacturing & National Distribution• Local Training, Service & Support

DISCRIMINATORS


PRODUCTS

SERVICES

Design ●




PROJECT DIRECTORwww.projectdirector.com.au

• Capability innovation, development, execution and oversight including long term programs

• Global execution and sequencing activities• Cross functional team’s liaison, harmonisation and

performance management• Complex integration activities and unique dynamic

problem-solving systems

• Strategy & structure requirements analysis and functional implementation

• Utilisation of diverse high-performance teams• Enhancement activities• Project and program management – Concept to completion

and integration

CAPABILITIES

• Department of Defence• Government agencies

KEY CUSTOMERS

• Proven global capability innovation, development & delivery affording continuous advantage

• Development, integration and utilisation of diverse high-performance teams

• High level complex problem solving, understanding and resilience in wholly new and emerging fields

• Extensive innovation experience to achieve safe, secure and resilient capability within complex environs

• Capability review and needs based assessment to program launch, development and integration

• Utilisation of unique enabling assets to effect successful outcomes

• Capability to pre-empt, mitigate & respond to adverse intent outcomes

• Unique oversight capabilities

DISCRIMINATORS

Lucas MaughanDirectorProject Director International Pty Ltd65 Mount Eliza Way, Mount Eliza VIC 3930Tel: +61 (0) 487 435 748Email: [email protected]

PPG COMMERCIAL PERFORMANCE COATINGS

www.ppgcpc.com.au

Frank FattoreSales Manager: Defence CoatingsPPG Commercial Performance CoatingsMcNaughton Road, Clayton VIC 3168Tel: +61 1800 076 466Email: [email protected]


PRODUCTS

SERVICES



PRODUCTS

SERVICES

Design ●





59

QUARTEK PTY LTDwww.quartek.com.au

• Static Strength Analysis• FEA - Linear Static, Dynamic, Thermal and Buckling, Non-

Linear, Large Displacement and Post-Buckling Behaviour• Fatigue and Damage Tolerance (F&DT) Analysis - Crack

Growth, Fatigue Stress & Life Prediction• Structural Design & Weight Optimisation

• Highly Experienced with Metallic, Composite & Hybrid Structures

• Capability Enhancement• Project Management• Through Life Support & Life Extension Programs

CAPABILITIES

• Boeing Defence Australia• Airbus Australia Pacific• QuEST Global Engineering

KEY CUSTOMERS

• ATTAR• AIDN

KEY PARTNERS

• ISO 9001:2015• CASG DSS Panel Member


• Achieved ‘World’s Best Practice’ Customer Satisfaction Rating by Airbus Australia Pacific

• Team Previously Engaged on Many Projects of Global Significance, Including F35 JSF, A400M, A380, A350, Hawkei and Chinook CH-47D

• Lean Cost Structure• Flexible, Client Tailored Engagement Models

• Remote & Off-site Working Expertise - Framework Established for ‘24 Hour Business Cycle’

• Agile and Dynamic Team Able to Continuously Provide Exceptional Value

• Privately Owned Australian Company• ITAR Ready

DISCRIMINATORS

Tel: Email:

Frank CoricaCommercial DirectorQuartek Pty Ltd ATF The Quartek Unit TrustSuite 1.06, 85 Gladstone Street, South Melbourne VIC 3205 +61 3 9078 4045 [email protected]

QUEST SALEwww.questsale.com.au

• Accomodation, Short term and Long Term self contained apartments

CAPABILITIES

• Exxon Mobil• Lockheed Martin

KEY CUSTOMERS

• Apartments Style rooms• Central Location

• National Brand

DISCRIMINATORS

Tel: Email:

David PygallFranchiseeQuest Vic Pty Ltd184 York Street, Sale VIC 3850 +61 3 5142 0900 [email protected]


PRODUCTS

SERVICES

Design ●



ICT & Software ●







Weapon Systems ●

60

RAE-LINEwww.rae-line.com.au

• Interior vehicle soft trim manufacture• Webbing products manufacture• Sports padding solutions manufacture

• Canvas products manufacture• Commercial upholstery• Commercial re-upholstery

CAPABILITIES

• Kenworth - interior trim• Paccar - interior trim• Iveco - interior trim• Jayco - interior trim

KEY CUSTOMERS• Kenworth• L&L Products

KEY PARTNERS

• ISO9001:2008 ISC• 50PPM Quality Control• Supplier of the Year - Kenworth,Paccar,Iveco• Premiers Sustainability Award


• Dedicated CAD design team• CNC cutting technology• Smart manufacturing systems

• Export ready (parts/service)• 50PPM• 100% DIFOT

DISCRIMINATORS


PRODUCTS

SERVICES

Design ●


Tel: Email:

Christian CarthewBusiness Development ManagerRae-LineFactory 5, 209 Liverpool Road, Kilsyth VIC 3137 +61 3 9728 8300 [email protected]

• Performance Modeling & Vehicle Dynamics: (for) acquisition, upgrade, T&E, validation & service life monitoring

• Systems Engineering: concept & capability definition, performance & technical specification, and design review

• Requirements Management & Compliance demonstration via modeling, simulation, measurement, test and verification

• Specialty Engineering for maintainability, reliability, availability, compatibility, producibility & human factors

• Maintenance Engineering analysis, service life assessment and extension, and obsolescence management

• Logistics Support determination: strategy, concept, definition, modeling, analysis, and life cycle management

• Quality, Safety & Risk Management: enterprise & project risk, process & compliance, competency audit and training

• Business System analysis and assessment: (of) strategy, implementation, process, performance and sustainment

CAPABILITIES

• BMT Design and Technology• Australian Rail Track Corporation• Rail Industry Standards Board - RISSB • Defence Science Technology Group

KEY CUSTOMERS

• Resonate Systems / Resonate Acoustics Pty Ltd• KneeDeep: Management Leadership Training RTO • AOC International - Electronic Warfare Assn• Insight Telecommunications / STM Consulting

KEY PARTNERS

• Project Management - Training & Practice• Training Design, Delivery & Assessment• Systems Engineering: Design, Test & Evaluation• ISO9001 Defence Quality & Compliance Auditor


• Design Standards (ADR, FMVSS & UN-ECE Reg) compliance, equivalence and assessment

• Bespoke Vibro-Acoustic capability & applications: (for) instrumentation, data capture and information analysis

• Maintenance and engineering analysis, service life assessment & extension, and reliability centred maintenance

• Strong record in rapid design & delivery of defence capability, secure infrastructure & support systems

• Instrumentation, Data Acquisition & Analysis: (for) asset condition monitoring and system performance analysis

• Design & Delivery of C4ISR capability in secure communications, radar, security, surveillance & EW systems

• Training, Skills Mapping & Competency assessment: performance needs analysis, design, delivery and sustainment

• High Value & Complex Project Management: cost & schedule planning, implementation & review, reporting and training

DISCRIMINATORS

REALM - SOLUTIONS FOR THE FUTUREwww.realmsolution.com.au

Jeff WalshPrincipalREALM Solutions (SA) Pty Ltd11/194 Alma Road, St Kilda East VIC 3183Tel: +61 (0) 421 685 327Email: [email protected]


PRODUCTS

SERVICES

Design ●





Weapon Systems ●


PRODUCTS

SERVICES

Design ●



ICT & Software ●






61

RMIT UNIVERSITYwww.rmit.edu.au/defence

• Autonomous systems, artificial intelligence, machine learning

• Composite and multifunctional materials (including micro/nano materials)

• Food technology & medical countermeasures• Human performance (strength, endurance) & human-

machine interaction

• Human personal protective equipment, textiles & fabrics• Mechanical and automotive engineering, propulsion, fuels

and energy• Systems engineering, modelling & simulation• Workforce training and development

CAPABILITIES

• Boeing, Thales, RUAG, BAE Systems• Defence: DASA, CASG, US ONR, AFRL• DefendTex and LEAP Australia• FORD Motor Company

KEY CUSTOMERS• Defence: DASA, CASG, DST Group• Defence Materials Technology Centre• CSIRO• Monash University

KEY PARTNERS

• Top 100 QS World ranking for RMIT Engineering • $10m plus revenue from Defence/industry 2016-18


• Full spectrum science and engineering• Extensive facilities for research and testing• Focus on outcome-oriented research • Culture of industry interaction

• History with Defence education and training• Record of successful DST and DMTC research projects• Proximity to research and industry partners• Procedures for protecting sensitive work

DISCRIMINATORS

Tel: Email:

Quin ChangDefence Sector ManagerRoyal Melbourne Institute of TechnologyGPO Box 2476, Melbourne VIC 3004 +61 3 9925 4064 [email protected]

RONSON GEARSwww.ronsongears.com.au

• CNC gear cutting of spur and helical gears• CNC gear grinding of spur and helical gears• CNC gear metrology• CNC rack milling

• Bevel gear cutting• Sub assemblies• Complete in house machining capability (turning, milling

& grinding)• Automated CNC gear cutting for production runs

CAPABILITIES

• BAE Systems• Marand Precision Engineering• Ferra Engineering• Boeing Defence (2nd Tier)

KEY CUSTOMERS• American Gear Manufacturers Association• AIDN-Vic• Eurotrans (Europe’s gear association)• Team Defence Australia

KEY PARTNERS

• AS9100D• ISO9001:2015• BAE Systems approved supplier• Significant Achievement Award 2013


• Highly innovative, high end and high value gear manufacturer

• AS9100D accredited gear manufacturer• Proven track record into defence programs• 60+ years experience in the gearing industry

• Internationally connected: Members of the American Gear Manufacturers Association and Eurotrans, Europe’s gear association

• Ability to manufacture to high quality standards (AGMA 2000: 12+)

DISCRIMINATORS

Tel: Email:

Gavin NewSales & MarketingRonson Gears18 Teton Court, Highett VIC 3190 +61 3 9276 8900 [email protected]


PRODUCTS

SERVICES

Design ●








62

RPC TECHNOLOGIES PTY LTDwww.rpctechnologies.com

• Armour Systems - localisation of applique armour by partnering with your existing suppliers

• Spall Curtains - Manufacture and supply of spall curtains and liners

• Local Manufacture - RPC can provide local manufacture of any identified parts to aid with achieving AIC

• In house research and development and advance composite technologies

• Design, engineering, manufacturing and application of composite materials to Defence applications

• Experience manufacturer for Land (vehicles, armour, spall curtains, sustainment)

• Specialty fabrication (Bisalloy Grades, Stainless and Duplex Steels, 5000, 6000 and 7000 Series Aluminium)

CAPABILITIES

• Defence• ASC Pty Ltd• Thales Australia• BAE Systems Australia

KEY CUSTOMERS• Tencate• MCE Mohr Advanced Composites and Ballistics• Optimal Armour• Bass Pacific

KEY PARTNERS

• ISO 9001• AS 4801• LoRS from CASG• HMA Innovation Award Winner 2010


• Advanced composite engineering and manufacture• Ballistic protection solutions (M113 and Bushmaster)• In-house laboratory and material science expertise

• Ability to provide localised solutions for Primes• Ability to provide through life support

DISCRIMINATORS


PRODUCTS

SERVICES

Design ●






James ZegirBusiness Development Manager - DefenceRPC Technologies Pty Ltd - Corio285 Heales Road, Corio VIC 3214Tel: +61 (0) 434 301 038Email: [email protected]

RUAG AUSTRALIAwww.ruag.com.au

• Component level Maintenance Repair and Overhaul• Precision Manufacturing of complex components at tight

tolerance levels• Managed Maintenance Repair and Overhaul• Metal Surface Treatment and Finishing, including Paint and

Prime, with Nadcap and multiple global prime approvals

• World leading Additive Repair Technologies and Manufacture• Nadcap approved Non-Destructive Testing• Engineering Services for design, development,

implementation & certification of repair schemes and test equipment

• Supply Chain Management for spares

CAPABILITIES

• Royal Australian Air Force• Royal Malaysian Air Force• Royal Australian Navy

KEY CUSTOMERS

• RUAG Group (Parent)• BAE Systems• Moog• Australian Department of Defence

KEY PARTNERS

• Nadcap Chemical Processing, NDT & Shot Peen• DGTA AMO and AEO• AS9100C, ISO 9001:2000• CASA Approved AMO under CASR Pt145


• Full ITAR approved staff and processes• Involved in 5th Generation Military Hardware since 2004• Long term contracts for MRO with ADF, proven track record

leading to higher reliability and increased availability• World leader in Additive Manufacturing with approved

Repair Technology capability• Experienced, highly qualified staff across multiple sites

Australia sites and support within entire RUAG Group

• Highly Accredited with Nadcap for Non-Destructive Testing, Chemical Processing & Shot Peen, ISO 9001:2000, AS9100C

• SCIP program participant• ‘One Stop Shop’ able to provide turn-key solutions due to

wide range of capabilities in-house

DISCRIMINATORS

Tel: Email:

Andy StephensCapture Manager, Land SystemsRUAG Australia Pty Ltd836 Mountain Highway, Bayswater VIC 3153 +61 3 9721 1300 [email protected]


PRODUCTS

SERVICES





PRODUCTS

SERVICES

Design ●









Weapon Systems ●

63

R.V.S. INDUSTRIES PTY. LTD.www.rvsindustries.com.au

• ~Zero supply chain containerised modular remote electricity and refrigeration system 10kwe base 16kwe peak 1kwr

• ~Zero supply chain containerised remote electricity, energy beam capable, defensive thermal skin temp. variability

CAPABILITIES

• Commercial in Confidence

KEY CUSTOMERS

• Commercial in Confidence

KEY PARTNERS

• RVSI remote power systems: near zero supply chain, heavy calibre bullet resistant, 40hr 10kw energy beam defensive

• RVSI provide power: remote, continuous, robust, rapid response, zero toxicity, skin temp variability

• Exclusive Patents

DISCRIMINATORS

Tel: Email:

Jonathon SarahManaging DirectorR.V.S. INDUSTRIES PTY. LTD.3E 104 Johnston St, Fitzroy VIC 3065 +61 3 9079 5950 [email protected]

• Full suite of Integrated Logistics Support services and training

• Logistics Engineering, including FMECA, LORA, RCM• Logistic Support Analysis• Learning, Training and Development solution activities

• Training Needs Analysis, Design, Development and Delivery• Training Media Analysis and Training Aid Development,

including simple to complex solutions• Technical documentation management, authoring and

illustrating

CAPABILITIES

• Australian Defence Force• Capability Acquisition and Sustainment Group• Defence Primes• Defence System/Equipment Suppliers

KEY CUSTOMERS

• AS/NZS 9001:2015• Registered Training Organisation (RTO• Defence Industrial Security Program• Defence Recognised Supplier


• Over 30 years experience with major Defence and industrial projects, using world’s best practices

• Ability to provide innovative, independent total ILS solutions tailored to client needs

• Proven ability to integrate into prime contractor organisations• Significant knowledge of engineering and design

processes which underpin support package development

• Excellent reputation for successful completion of major projects within budget and on time

• Successful in exporting ILS capabilities to European and Asian countries

• Quality Accredited to International Standard ISO 9001• Registered Training Organisation with the Australian

National Training Authority

DISCRIMINATORS

SCIENTIFIC MANAGEMENT ASSOCIATES (OPERATIONS) PTY LTDwww.sma.com.au

John RobertsonGeneral ManagerScientific Management Associates (Operations) Pty Ltd19 Shierlaw Avenue, Canterbury VIC 3126Tel: +61 3 9816 5302Email: [email protected]


PRODUCTS

SERVICES

Design ●




64

SIEMENS LTDwww.siemens.au/defence

• Complete factory automation solutions: from Simulation and design to automation and optimisation

• Secure distributed Energy Systems• Design Simulation for Virtual Testing and Validation solutions• Solutions for composite material design and manufacturing• Sub-system system integration validation and virtual

commissioning through simulation

• PLM software solutions for Program & Product Management, Integrated Design & Engineering

• SINUMERIK CNC system machine tools technology for precise machining

• PLM software solutions for Digital Construction, Service & Support

CAPABILITIES

• Rheinmetall• Mercedes• US DoD• CASG

KEY CUSTOMERS

• Siemens AG• ATOS• BAES• DST Group

KEY PARTNERS

• ISO 9001


• Worldwide market leader for PLM solutions for automotive design and manufacture

• Unparalleled positioning as a thought leader and innovator for the digitalization of assets

• Distributed Energy Secure Systems

• PLM provider to the Land Systems Division in Defence• Major investor in Defence and Industry, including workforce

development and technical training• Leading provider to US DoD for secure smart energy

systems and energy efficiency solutions

DISCRIMINATORS


PRODUCTS

SERVICES

Design ● ●



ICT & Software ●






Tel: Email:

Andrew SealHead of Defence and MaritimeSiemens Ltd885 Mountain Highway, Bayswater VIC 3153 +61 (0) 429 384 521 [email protected]

SILVERBACK CARGO CAREwww.silverback.com.au

• Load restraint equipment including ratchet tie-down straps, chain kits & load binders, hooks & shoring bars

• Cargo protection equipment including dunnage, tarps, plywood, pallet angles, chain knuckles & security seals

• Packing & packaging supplies including stretch wrap, strapping & one-way lashing. Dangerous goods labels & signs

• Warehouse supplies including materials handling equipment, line marking, tools and cleaning products

• Safety products including head, eyes & ears protection, gloves, coveralls, respirators & traffic calming products

• Emergency response products including incident initial response kits, spill control & dangerous goods storage

• Lifting equipment including chain slings, flat and round slings

• National distribution with warehouse & retail hubs in Brisbane, Sydney, Melbourne & Adelaide, AND online store

CAPABILITIES

• LSD/General Support SPO• JLUs, Air Force (HQCSG)• ASC, Broadspectrum, BAE Systems• Toll, Linfox, Sydney Water, Supermarkets

KEY CUSTOMERS

• Silverback Container Management Services• Prenco Environmental Spill Control• Austlift• Mix of Australian and overseas suppliers.

KEY PARTNERS

• Certified compliance with product standards.


• The widest range of highly customisable cargo care equipment at wholesale/manufacturer prices. Deal direct

• Dedicated Defence Business Manager with ADF procurement and engineering experience

• Problem-solving specialists with over 50 customised products and test procedure development experience

• Program of continuous, INDEPENDENT compliance testing to ensure that ALL deliveries are compliant

• Self-manufacture 70% of our range• Wholly Australian owned

DISCRIMINATORS

Tel: Email:

David ColeDefence Business ManagerSilverback Cargo Equipment147 Railway Place, Williamstown VIC 3016 +61 (0) 416 012 779 [email protected]


PRODUCTS

SERVICES





PRODUCTS

SERVICES





65

SRXwww.srxglobal.com.au

• Electronic Contract Manufacture• Electronic/Electrical Assembler

• Manufacture directly to Tier 1 Customers

CAPABILITIES

• Thales• Lockheed Martin• Northrop Grumman• Resmed

KEY CUSTOMERS

• Planet Innovation• Hydrix• Procept• LX Group

KEY PARTNERS

• Vic Large Manufacturing Awards Winner 2015• ISO9001, ISO13485, ISO14000• Manufacture to IPC Class 1, 2 or 3


• SRX is the largest Electronic Manufacture In Australasia and Australian owned

• Providing PCBA Manufacturing Assembly• Provide Box Built product

• Have access to low country sourcing• Manufacturing facilities In Melbourne Australia and Johor

Bahru in Malaysia• ITAR trained personnel

DISCRIMINATORS

Tel: Email:

Sam PapadopoulosBusiness Development ManagerSrxglobal Australia Pty Ltd10 Kitchen Road, Dandenong South VIC 3175 +61 3 9212 4222 [email protected]

• Infrastructure projects, construction & design management• Document development, control and configuration

management• Management of change

• Product/System Development Management • QMS systems, human factors, risk consulting• Supply chain & project procurement services• Market analysis & supply chain strategy

CAPABILITIES

• Downer• Yarra Trams• DEDJTR

KEY CUSTOMERS

• Tramobus• Tricycle Developments• Institute of Railway Technology

KEY PARTNERS

• ISO 9001 pending • AVETA Certification


• Strong relationships with international advanced manufacturers

• Strong relationships with international OEM parts suppliers • In depth knowledge of logistics streams both domestic and

international

• Over 40 years experience in heavy transport engineering services

• Proven track record in delivery of complex transport engineering management, refurbishment & procurement programs

DISCRIMINATORS

STRATEGIC CONNECTIONS GROUPwww.strategicconnectionsgroup.com

Alan BurnsDirector, Principal Strategic Connections Group Pty Ltd50 Upper Heidelberg Road, Ivanhoe VIC 3079Tel: +61 (0) 423 783 434Email: [email protected]


PRODUCTS

SERVICES

Design ●






66

SUPACATwww.supacat.com

• High Mobility Transporter (HMT Mk II) designed for Special Forces, provides unmatched mobility and flexibility

• The Light Reconnaissance Vehicle 400 (LRV 400) is a a highly transportable, high speed, high mobility vehicle

• The All Terrain Mobile Platform (ATMP) is a highly mobile and reliable workhorse in the desert, jungle or beach

• The Littoral Recovery Platform (LRP) is a unique tactical littoral logistics platform

• The Supacat Multi-purpose Vessel (SMV 24) is a high performance, cost effective solution for offshore support ops

• Special Vehicles - developed specifically to target transport solutions for special requirements and customers

• Supacat provides innovative, rapid services covering all elements of vehicle design, prototype, test and trial

• Supacat provides a full range of customer support capabilities for its own and third party products

CAPABILITIES

• Defence forces including Australia & UK• Defence primes• Major automotive and mining companies• Major marine and renewable companies

KEY CUSTOMERS

• Rheinmetall• Supacat Team Australia

KEY PARTNERS

• ISO 9001• ISO 14001


• Supacat specialises in high mobility, all terrain vehicles and complementary machinery

• Supacat provides products and services in the defence, automotive, renewables, marine and mining sectors

• A compact prime contractor, Supacat delivers through-life capabilities to customers

• Supacat provides engineering services directly to customers within Australia, Asia, North America and Europe

• Core capabilities include automotive and composite design, product design, prototype development and validation

DISCRIMINATORS


PRODUCTS

SERVICES

Design ● ●











Tel: Email:

Michael HalloranManaging DirectorSupacat49 Wharf Road, Port Melbourne VIC 3207 +61 3 8645 8300 [email protected]

• Complete Pressure System Design and Manufacture• Medical Gas Systems• Valves and Fittings to 4,134 Bar• Hoses to 413 Bar

• Hydrostatic Test Cells and Trolleys• Pressure Regulation and Control Systems• Precision Welding System• Complete Training and Through Life Support programmes

CAPABILITIES

• Varley Group• ExxonMobil• Boeing• Bechtel

KEY CUSTOMERS

• Swagelok Company• Flow Tech Australia

KEY PARTNERS

• ISO 9001:2015


• Limited Lifetime Warranty on Materials & Workmanship• Over 10,000 NSN catalogued modular systems and

components readily available• Diverse experience across harsh Land applications in

various platforms and markets

• Global Network of 200 Service Centres to insure support• Victorian Design and Manufacturing capability with Global

Support

DISCRIMINATORS

SWAGELOK EASTERN AUSTRALIAwww.swagelok.com/ea

Steve FosterBusiness Development ManagerFluid System Technologies (ES) Pty Ltd42 Metrolink Circuit, Campbellfield VIC 3061Tel: +61 3 9303 2100Email: [email protected]


PRODUCTS

SERVICES

Design ●










PRODUCTS

SERVICES

Design ●



ICT & Software ●






67

• Quantum technology: computing; measurement and sensors; communications and information networks

• Cybersecurity: cross-layer key management; multi-factor authentication; cloud security; adaptive cyber defence

• AI: agent-agent intelligent negotiation for collaborative learning, adaptive logistics and resource optimisation

• Development and integration of advanced IoT devices and robots, including real-time data analysis

• Data to Decisions: data collection, preparation and curation, analytics, visualisation for machine learning

• Advanced materials and manufacturing processes for armour / hardening applications

• Photonics laser laboratories; graphene hybrid manufacture; and nano-fabrication

• Industry 4.0 demonstration factory (scale) with design, visualisation, and additive manufacturing capabilities

CAPABILITIES

• Australian Department of Defence• US Department of Defence• Australian Defence Primes• Australian Defence Industry SMEs

KEY CUSTOMERS

• DST Group• CSIRO• Defence Materials Technology Centre (DMTC)• Siemens Australia

KEY PARTNERS

• Top 2.1%, THE World University Rankings 2017• Top 2.2%, QS World University Rankings 2017• Top 2%, Academic Ranking of World Universities• Top 300 in Physical Sciences - THE


• Ability to assemble multi-disciplinary team of globally recognised experts in short time period

• Proven excellent performance with Defence projects• Culture of active engagement with Defence and the

Defence Industry to meet challenges

• Both higher education and vocational / TAFE education and training capabilities to meet entire span of workforce

• Nation leading Industry 4.0 research and education capabilities (Siemens Test Lab)

• Experience in combined data analytics, AI, IoT and cybersecurity research teams for whole-of-systems outcomes

DISCRIMINATORS

SYPAQ SYSTEMS PTY LTDwww.sypaq.com.au

• Founded in 1992, Australian owned, operates throughout Australia and Asia with around 200 employees

• Advanced professional consulting, systems integration and support services in the Defence and Aerospace domains

• C4ISREW systems integration services• Project & Program Management; Capability Definition

Development, Acquisition and Sustainment Logistics

• Platform, Systems, Communications, Electrical & Electronics Engineering

• Software Development & Integration; Verification and Validation; Test Program Management and Execution

• ICT System Architecture/Design; Managed Application Support Services; Business Analysis

• Next Generation Autonomous Systems

CAPABILITIES

• Defence Innovation Hub• Department of Defence (CASG, Navy, Army, RAAF) • CIOG, AGIO, DSTG• Industry - Lurssen, BAE Systems, L3

KEY CUSTOMERS

• UTC Aerospace Systems• Acrturus UAV• Corvo Autonomous Systems• Sightline Applications

KEY PARTNERS

• ISO 9001:2015 Certified by Lloyds Registry• Member, Defence Industrial Security Program


• Value for Money: Low overheads and competitive pricing, as well as metrics-driven development and support methodol

• Proven methods and procedures compliant with ISO, USA and NATO Standards

• Australian representative for UTC Aerospace Systems (UTAS)

• Full motion video (stored & live) and still image (satellite)• SAR, SIGINT, HUMINT, ELINT, Track Data, etc• SYPAQ proprietry autonomous systems - Corvo• C4ISREW systems currently deployed with UK forces• Supplier of the Arcturus JUMP20 UAS capability - Tier II,

High Performance, High Payload, Versatile, VTOL MTUAS

DISCRIMINATORS

Tel: Email:

Amanda HoltCEOSYPAQ Systems Pty LtdLevel 5, 441 St Kilda Road, Melbourne VIC 3004 +61 3 9867 2565 [email protected]

SWINBURNE UNIVERSITY OF TECHNOLOGYwww.swinburne.edu.au

James DavernBusiness Development ManagerSwinburne University of TechnologyJohn Street, Hawthorn VIC 3122Tel: +61 3 9214 5374Email: [email protected]


PRODUCTS

SERVICES

Design ● ●





68

SYSTEMATIQwww.systematiq.com.au

• Sales support – Campaign and capture management• Tender Development and support. Bid Writing, Strategy

development / Red Team reviews• Procurement support (Statement of work development,

supplier selection)• Contract Data Requirements Support (development and

delivery of customer mandated data items to support contracts)

• Integrated Logistics Support (ILS) and Logistics Support Analysis

• Asset Management, in accordance with ISO 55000. Asset tracking, management and cost/benefit analysis

• Systems Engineering• Quality Management (QMS auditing and preparation for

certification)

CAPABILITIES

• Capability Acquisition and Sustainment Group (formerly DMO)

• Primes, Leidos, Mercedes-Benz, Indra• MSPs Downer, KBR, Nova Systems Frazer-Nash • Manufacturers: Cablex, RPC Technologies, Marand

KEY CUSTOMERS• Learning Systems Analysis (LSA)• Grey Knowledge Group• Fenneck Group

KEY PARTNERS

• ISO 9001


• Experience with the ASDEFCON suite of contracting templates

• MILIS qualified personnel capable of providing Supply Support Analysis

• ISO 15288 (Systems Engineering) aligned for project based services

• Familiar with OPUS, PS Analyser and RAM software suites

• Large Surge capacity through extensive sub-contractor support network

• Pre-Qualified on Defence contracting panels. (CASG, DSTG, Simulation)

• Internal collaboration tools to allow onsite and offsite support to customers

• ISO 55000 experienced

DISCRIMINATORS


PRODUCTS

SERVICES



Brydon JohnsonDirector Business DevelopmentSystematiq Pty LtdSuite 1409 Lt. Collins St., Melbourne VIC 3000Tel: +61 (0) 402 257 972Email: [email protected]

TECTONICA AUSTRALIAwww.tectonica.net

• Mobile and Portable Power Solutions for Soldiers, Autonomous Systems and Manned Vehicles

• Protected Navigation in GPS denied environments for soldiers, autonomous systems and manned vehicles

• Local situational awareness systems for armoured fighting and combat reconnaissance vehicles

• High quality manufacturing of electronic and mechanical systems

CAPABILITIES

• Defence• Law Enforcement• Rheinmetall Defence Australia• Rockwell Collins

KEY CUSTOMERS• Ultralife Corporation• Rheinmetall Defence Australia• Honeywell Aerospace

KEY PARTNERS

• ISO 9001:2015• Land Forces Innovation Award


• BANTAM Power and Data Management Systems designed for dismounted soldiers and vehicle platforms.

• STATIX hand held battery tester designed for the soldier and the fleet manager.

• LanNav protected armoured vehicle navigation system for GPS denied environments

• ALTERA local situational awareness system, designed to improve awareness in armoured vehicles

DISCRIMINATORS

Tel: Email:

Rachad HusseinBusiness Development ManagerTectonica Australia Pty. Ltd.88 Dynon Road, West Melbourne VIC 3003 +61 3 9381 6700 [email protected]


PRODUCTS

SERVICES

Design ●





PRODUCTS

SERVICES

Design ● ●





69

TEXTRON SYSTEMS AUSTRALIAwww.textronsystems.com

• Engineering Design of the proven AerosondeTM UAS platform ranging from mechanical, eletrical, propulsion, avionic and aerospace disciplines

• Manufacturing of the Aerosonde UAS platform• Systems integration of customer payloads

• Worldwide UAS Flight Operations• UAS Pilot and Maintainer Trainer on the Textron Shadow

200 TUAS and other platforms• Flight Simulator maintenance• Maintenance Crew training

CAPABILITIES

• Textron Systems• Commonwealth of Australia• US Forces• Australian Army

KEY CUSTOMERS• Textron Systems• Textron Inc.• L-3 Link Simulation and Training• University of Sydney

KEY PARTNERS

• AS9100• 2013 Governor of Victoria Export Award, Manufacturing

Award - Commendee• Member, Defence Industrial Security Program


• Designing, manufacturing, operating and supporting one of the world’s most reliable and trusted multi-mission unmanned aircraft.

• Aerosonde systems have more than 300,000 operational hours in some of the world’s most harshest environments

• Long range, Long Endurance, Beyond Visual Line of Sight unmanned aircraft

• UAS can carry several payloads/sensors in a single flight, returning a richer, more meaningful data yield in every hour flown

• Our experience brings our military, civil and commercial customers a decisive advantage

• Additional services include flight simulator maintenance and maintainer training for manned aviation including the C17 Globemaster cargo aircraft and the Australian Army Shadow 200 TUAS

DISCRIMINATORS

Tel: Email:

Jack KormasManaging DirectorTextron Systems Australia Pty LtdUnit 1, 585 Blackburn Road, Notting Hill VIC 3168 +61 3 9518 7300 [email protected]

THE SMART THINKwww.thesmartthink.com

• Manufacturing of Combat helmet and Ceramic Armour• Automated Manufacturing of Composite Components and

Systems

• Armour System Design, Development and Manufacturing • Resin Pre-Impregnation of Composites• Rapid Prototyping of Composites and 3D Printed Structures

CAPABILITIES

• The Smart Think Singapore• DMTC• Deakin University• Honeywell

KEY PARTNERS

• Spliceless composite manufacturing • Automated composite manufacturing

• Automated Resin Pre-Impregnation

DISCRIMINATORS

Tristan AlexanderCTOThe Smart Think Australia Pty. Ltd.75 Pigdons Rd, Waurn Ponds VIC 3216Tel: +61 (0) 437 844 454Email: [email protected]


PRODUCTS

SERVICES

Design ●






Weapon Systems ●

70

TITOMIC LIMITEDwww.titomic.com

• OEM for Titomic Industrial Scale Additive Manufacturing systems; Machines, Process and Material Science

• Parts manufactured by Titomic Additive Manufacturing process can replace castings and forgings with heat treatment

• New super alloys which are lighter, stronger and more cost efficient for land vehicle components

• Upgrade or manufacture of stronger, lightweight applique and spaced armour

• Ballistics shielding, Electromagnetic interference EMI/ Radio Frequency Interference RFI shielding coatings

• Patented Manufacturing process for load bearing structures by supersonic fusion of metal powders on scaffold

• Based on a well-known technology use for repair of gearboxes and Blackhawk helicopters

• Faster and more sustainable manufacturing with up to 80% reduction in material wastage

CAPABILITIES

• Defence• Marine - Fincantieri• Mining, Oil & Gas - Callidus• Aerospace

KEY CUSTOMERS

• International Titanium Association• CSIRO

KEY PARTNERS

• ISO 9001 in progress


• Print large complex shapes with no size constraints: current build envelope L x W x H : 9 x 3 x 1.5 m (40.5m3)

• Print monocoque, seamless parts, current rotational build size L x Diameter : 5 x 2m

• Cold manufacturing process; does not melt metal, no heat oxidation or distortion and no need for vacuum chamber

• Industry leading build rates of up to 45 kg / hr• Deposition efficiency as high as 95% (material dependent)• Fuse dissimilar metals for multiple performance or multi-

layer stronger yet lighter armour plates• Process for polymer composites with surface metallisation

for next generation armour protection

DISCRIMINATORS


PRODUCTS

SERVICES

Design ●









Weapon Systems ●

Tel: Email:

Mich MakGM, MarketingTitomic1/371 Ferntree Gully Road, Mount Waverley VIC 3149 +61 3 9558 8822 [email protected]

TOWERS GROUP PTY LTDwww.towersgroup.com.au

• Project Management and Project Management Support• Capability Development• Systems Engineering• Science and Technology Support

• Electrical Engineering• Mechanical Engineering• Research and Development• Materials Science

CAPABILITIES

• Capability and Acquisition Sustainment Group• Defence Science and Technology Group• Department of Defence

KEY CUSTOMERS

• Current domain knowledge and valuable experience resulting from previous full-time ADF service on operations

• Towers is a Defence Industry Security Program (DISP) member and sponsors all staff Australian Security Clearances

• As a Small to Medium Enterprise (SME), Towers is lean and delivers best value for money for clients

• Towers maintains a commitment to ongoing professional development of staff

• Towers is a member of multiple professional bodies and affiliations to remain at the forefront of best practice

DISCRIMINATORS

Ryan OswinDirectorTowers Group Pty LtdOffice 34/68-72 York Street, South Melbourne VIC 3205Tel: +61 (0) 421 846 787Email: [email protected]


PRODUCTS

SERVICES



PRODUCTS

SERVICES


71

TRIMCAST PRODUCTS PTY LTDwww.pelicanaustralia.com

• Reusable plastic shipping and storage containers• Custom Advanced Case Solutions• Designed and manufactured to DEFAUST 1000c packaging

standards

• Custom rotomoulders• Design, develop, test and manufacture capability in Victoria

CAPABILITIES

• Rolls Royce• Lockheed Martin• Airbus• Boeing

KEY CUSTOMERS

• Pelican Products

KEY PARTNERS

• Experience in designing more than 1500 NSN catalogued packaging solutions

• Manufacturers of the largest plastic cases in the world• Solutions are up to 30% cheaper than metal case

alternatives• Solutions are superior to timber packaging in product

protection and re usability

• Capacity to mobilise and deliver in short lead times, to meet urgent operational requirements

• Patented, innovative, cost saving solutions• Largest range of ‘off the shelf’ and bespoke solutions• Global support, research and manufacture facilities

DISCRIMINATORS

Tel: Email:

Justin EvansSales Manager - Defence & Technical PackagingTrimcast Products Pty Ltd2 Forbes Close, Knoxfield VIC 3180 +61 3 9765 1500 [email protected]

UNIFORM SAFETY SIGNSwww.uniformsafetysigns.com

• In-house design & manufacture all types of signage, labels, stencils, engraving, decals, vehicle sticker sets

• Digital Printing, UV Printing, Screen Printing, Signs with UV Laminate or Anti-Graffiti Laminate

• Material: Aluminium, Stainless Steel, Colourbond, Polypropylene, Self Adhesive, Alucabond, PVC, Avery Reflective etc.

• On-site Signage surveys• Installation Service• National Representation

CAPABILITIES

• Defence

KEY CUSTOMERS

• BHP Metals• Avery Dennison Reflective

KEY PARTNERS

• Flexible signage solutions to cater for projects from start through to completion

• Fully intergrated ERP platform• 26+ plus years industry experience

• Australian owned and operated• Average of 98.5% DIFOT• Continuous improvement management style

DISCRIMINATORS

Tel: Email:

Terry McMurdoSafety Specialist/DirectorUniform Signs Pty Ltd3-5 Amcor Way, Campbellfield VIC 3061 +61 3 9357 9820 [email protected]


PRODUCTS

SERVICES

Design ● ●







72

• VAPPRO PRESERVATION SYSTEM: Preservation technology for military vehicles, equipment and weaponry

• LUPROMAX-EA: is an anti-friction oil additive that achieves exceptional results even with total fluid loss

• VAPPRO CORROSION SOLUTIONS: offers a wide range of environmentally friendly VCI products tailored for defence

• VCI Gun Lubricants, automatic barrel cleaning, copper removal and preservation

• VCI diesel fuel additive to dissolve sludge and protect fuel system for 2 years

• VCI Film, paper, pouches for long term storage• VCI emitters and sprays for protection of electrical

equipment• Anti-fungal lens coating

CAPABILITIES

• Singapore Navy: Lupromax-EA• Taiwan Defence: preservation of heavy vehicles• Advanced Warfare Destroyer: Void protection• Schlumberger: preservation of land rigs

KEY CUSTOMERS

• Magna International Pte Ltd• www.magnachem.com.sg

KEY PARTNERS

• Listed in NATO MCRL.• ISO 9001 & ISO 14001• RoHS compliant.• Various global patents.


• Listed in NATO MCRL• Patented products• Technical expertise leading to strong product research and

development• Many products are unique in the industry

• Environmentally responsible (RoHS)• Cost effective, driving savings in maintenance, less

replacement and through reduced wear and tear• Testing facilities available for solving unique problems

DISCRIMINATORS


PRODUCTS

SERVICES

Design ●








• Signage and Wayfinding solution design, assessment/auditing

• Alternative Non-Powered Lighting & Evacuation Systems; includes Low Location Lighting (9 hour glow)

• Signage: Photoluminescent, reflective, standard; aluminium, polypropylene, lexan, vitreous enamel substrates

• Lumink Photoluminescent technology: glows longer with less excitation (6lx); can be printed on virtually anything

• Eco Crystal: Durable Glass Coatings that are slip resistant• KAG Safety Rail, including Glow and fibre optic versions• Stair Nosings - including luminous and LED• Sentinel: Technology that addresses all aspects of

Contingency/ Emergency Planning & Regulatory Compliance

CAPABILITIES

• Defence• BAE Systems Australia• Navantia• RAF (UK)

KEY CUSTOMERS

• Sakerhetspartner Norden AB• Glass Metal Industries• Tenacious Tapes• Parken Engineering

KEY PARTNERS

• ISO 9001: 2015• Lloyd’s Register Quality Assurance• Victorian Manufacturing Awards Finalist 2015• Lloyd’s Manufacturing & Product Design Approval


• 20 year proven track record delivering quality to DoD/DMO, Defence Primes and SMEs

• Strontium based photoluminescent pigment: glows longer with less charge

• Low Location Lighting: “Red Light’ compliant system, exceeds ISO 15370 luminous requirements after 9 hours at 6 lx

• DRSS Accreditation - Defence Recognised Supplier Scheme• High Quality, Durable Products which out last and out-

perform any alternatives on the market• Vitreous enamel: 25 year warranty externally• Products are easy to install and retrofit, thereby facilitating

ease of future upgrades• Defence Codification - Z2K90

DISCRIMINATORS

VAPPRO CORROSION CONTROL AUSTRALIA PTY LTD

www.vappro.com.auWAY OUT EVACUATION SYSTEMSwww.wayout.com.au

Nigel GordonDirectorVappro Corrosion Control Australia Pty Ltd6/23-25 Bunney Road, Oakleigh South VIC 3167Tel: +61 3 9558 2980Email: [email protected]

Aston SmithManaging DirectorWay Out Evacuation Systems Pty Ltd40-44 Wells Street, Frankston VIC 3199Tel: +61 1800 929 688Email: [email protected]


PRODUCTS

SERVICES







PRODUCTS

SERVICES



73

WELD AUSTRALIAwww.weldaustralia.com.au

• Welding consulting and advisory services• Welding processes and procedures• Safety and quality systems and audits• Company certification to AS/NZS ISO 3834

• Independent third party opinion • Engineering and design services• Failure investigation • Training and certification of welding personnel

CAPABILITIES

• Rheinmetall Defence Australia• BAE Systems• Bisalloy

KEY CUSTOMERS• Australian Steel Institute • Australian Corrosion Association• International Institute of Welding• Advanced Technology Testing & Research (ATTAR)

KEY PARTNERS

• IIW Authorised National Body• IIW Authorised Training Body • IIW Australian representative member


• Peak body for welding in Australia• Australian representative member of the International

Institute of Welding (IIW)

• International Institute of Welding (IIW) Authorised Training Body

• International Institute of Welding (IIW) Authorised National Body

DISCRIMINATORS

Tel: Email:

Geoff CrittendenChief Executive OfficerWeld AustraliaUnit 1, 64 Bridge Road, Keysborough VIC 3173 +61 2 8748 0100 [email protected]

YTEKwww.ytek.com.au

• Modelling and Simulation (M&S) for Decision Support and Training

• Automated training assessment and debriefing tool development - ExTrace

• Interoperability and tactical data link technology expertize and products

• Software development for advanced engineering applications

• Defence simulation environment research and experimentation support

• Use of High Performance Computing (HPC) for engineering simulation and analysis (Including CFD and FEM)

• Explosive Ordnance, Pyrotechnics and Energetics R&D Support Services

CAPABILITIES

• DST Group• Army

KEY CUSTOMERS• Cray Australia - HPC Systems• MASA Group (France) - SWORD / DirectAI• DIGINEXT (France) - DirectCGF / TDL• PITCH Technologies (Sweden) - HLA / DIS

KEY PARTNERS

• Victorian Gov Technology Innovation Grant 2015• CSIRO SIEF STEM+ Grant 2016


• Specialist, niche systems integrator with expertise in M&S and T, and Computational Intelligence (CI)

• Specialist Expertize in Explosive Ordnance, Pyrotechnics and Energetics R&D and S&T Support Services

• Independent R&D house• 24 Yr Defence experience track record• DISP accredited

DISCRIMINATORS

Tel: Email:

Richard YanieriManaging DirectorYTEK Pty LtdLevel 1, 231B High Street, Ashburton VIC 3147 +61 3 9882 2052 [email protected]

74

Victorian Defence Alliance - Land Systems Membership as at August 2018

A. Noble & Son Ltdaadi Defence Pty LtdAARCAB Phillips Pty LtdAble Industries EngineeringAcacia FoundryACS AustraliaADP Composite Engineering Pty LtdAerospace MaterialsAFL GroupAgility Logistics Pty Ltd Air RadiatorsAlbins Performance TransmissionsAll Sat CommunicationsAllied Technology InternationalAltair EngineeringAlternative EngineeringAmaero EngineeringAME SystemsAMOG ConsultingAmphenol Australia Pty LtdAMTANCAAnchoring Rope & RiggingAndrew EngineeringANSTOAnywise ConsultingAOSApplied Fasteners & ToolingAPV Engineering & Testing Services Pty LtdAssociated Foreign ExchangeATTARAustbrokers Countrywide Insurance BrokersAustest LaboratoriesAustralian Aerospace EngineeringAustralian Defence ApparelAustralian General EngineeringAustralian Precision TechnologiesAustralian Welding SolutionsAuTCAviallAW BellAxalta Coating SystemsBAE Systems AustraliaBarden FabricationsBaron RubberBartlett ManufacturingBauer EngineeringBid WriteBlack Stump TechnologiesBMP Engineering

Brace TechnologiesBrenco AerospaceBrenniston First AidBruck Textile Technologies Pty LtdBullEx AustraliaBunjil EnergyBureau Technologies Group Pty LtdC4 Engineering Pty LtdCablexCalbah IndustriesCambridge TechnologiesCampagno Engineeringcarecompany.com.auCerametCGB Precision ProductsChemring AustraliaChemsol Australia Pty LtdChets Professional Services Pty LtdChubb Fire & SecurityCider House ICTCity of Greater GeelongCNC Design Codarra Advanced SystemsCold LogicCommitted Solar SolutionsCommunications Connect Ltd. Pty.Communications Design and Management Pty LimitedCommunity ChefCornell DesignCrowe Horwath (Aust) Pty LtdCRP Industries Pty LtdCummins South PacificCynch SecurityDana Australia Pty LtdDaronmont TechnologiesDB SchenkerDeakin UniversityDefence Science InstituteDEK CorporationDelfab Engineering Pty LtdDelta Gamma RF ExpertDFP RecruitmentDirect Edge ManufacturingDMTCDon Kyatt Spare PartsDonaldson AustralasiaDraeger Australia Pty. Ltd.Durrant DurrantDVR ENGINEERING PTY LTDElbit SystemsEnerSys Australia Pty Ltd

Enterprising PartnershipsEnvirofluidEnviroRisk Management Pty LtdFibre-Tech SolutionsFire Protection TechnologiesFlight Data SystemsFLIR Systems AustraliaFluid DynamicsFracht AustraliaFrazer-NashFrontline AustralasiaFroude Hofmann AustraliaFurphy EngineeringG&R Maintenance Pty LtdGascoGeelong Defence AllianceGeelong Defence Business OfficeGenieGrips Pty LtdGPSat Systems AustraliaGreyScan Australia Pty LtdGroundmaster EngineeringH&H Machine ToolsHAAR AustraliaHardchrome Engineering Pty LtdHardman Bros. Pty LtdHarrop Engineering AustraliaHasco FoundryhdL GroupHenkel AustraliaHERE TechnologiesHeuch RefrigerationHide Away Safe CoHofmann EngineeringHolmwood GroupHydac Pty LtdHydrix Pty LtdIdeation Product Solutions Induction GroupInfosys PortlandInnovative Security & DataIntegra SystemsIntegrated Design & Engineering Solutions Pty LtdInterchemIntercorpInterlloyInternational Consultants CentreInternational LogisticsInvenioIon Systems Pty LtdiRubber Pty Ltd (Dalsouple rubber)IXL Metal Castings

75

J. Anderson and CompanyJacobsJacobs Radio Australia, JRA, Jacobs RadioJVATKeoghsKidde Aerospace & Defence Pty LtdKinexusKPMGL3 TechnologiesLa Trobe UniversityLatrobe City CouncilLean Design AustraliaLED AutolampsLitra Australia Pty LtdLMATS PTY LTDLogistic Engineering ServicesLogistic Solutions AustralasiaLovitt Technologies AustraliaLuminact Pty LtdLuna Nameplate IndustriesMackay Consolidated Industries Pty LimitedMacro RecruitmentMagefekt Pty LtdMantra GroupMarandMatrix Applied Computing Pty LtdMemko Pty LtdMet OptixMetfastenersMicro Planning InternationalMilspec ManufacturingMomentum SystemsMoog AustraliaMorgan Advanced Materials - Thermal CeramicsMoTeC Pty LtdMotherson Elastomers Pty LimitedNDZ EngineeringNelson Global Products AustraliaNexus Training SolutionsNezkot Precision Tooling & EngineeringNiksar Australia Pty LtdNova SystemsNoventusNovonicsOpen WeldingOpus International ConsultantsParadigm Press Pty LtdParker Hannifin Australia Pty LtdPennant AustralasiaPenske Power SystemsPentarch

Perform ZonePhasor InnovationPHM TechnologyPitcher Partners Consulting Pty LtdPlastool International Pty LtdPlattarPoint TradingPortland Precision EngineeringPowerjump Technologies Australasia Pty LtdPPG Commercial Performance CoatingsPrecise Advanced Manufacturing GroupPriority ERP Pty LtdProductWiseProfile Cutting SystemsProject Director InternationalPWB AnchorQuartek Pty LtdQuest SaleQuickstep Holdings LtdR.V.S. INDUSTRIES PTY. LTD.R&I Instrument & Gear (Aust) Pty LtdRadical Torque Solutions Pty LtdRadio Frequency SystemsRae-LineREALM - Solutions For The FutureRectifier TechnologiesRed BaronRedline Engineering Pty LtdRedstackRefuel InternationalRF IndustriesRiches Auto RefinishingRMIT UniversityRMR Engineering P/LRonson GearsRPC TechnologiesRPR Trades Pty LtdRUAG AustraliaRubicon Associates Pty LtdSAAB AustraliaSafemate AntislipSayfa GroupScientific Management Associates (Operations) Pty LtdSEM Fire & RescueShakanda EngineeringSiemens LtdSilverback Cargo CareSimuservSinclair Xray Inspection ServicesSincore Engineering Pty LtdSKF Australia Pty Ltd

SOS HydrateSouthern SpreadersSP McLean EngineeringSpray Shop Supplies Pty LtdSRX GlobalStable Australia Pty LtdStealth Electric BikesStowe AustraliaStrategic Connections GroupStug AustraliaSupacatSwagelok Eastern AustraliaSwinburne University of TechnologySyntholine ProductsSYPAQ SystemsSystematiq Pty LtdSystra ScottListerTasweld Engineering Pty LtdTCF ServicesTectonica AustraliaTele-mac Cable Co.TEX ONSITE PTY LTDTextron Systems AustraliaThales AustraliaThe PAC GroupThe Paynter CompanyThe Smart ThinkTitomicTLR Contracting Towers Group Pty LtdTrakka Corp Pty LtdTransdiesel Australia Pty LtdTrax Print Pty LtdTrimcast ProductsTrustweld Engineering Pty LtdTVN ON-COUNTRY PTY LTDUltra Vision LightingUNeek BendingUniform Safety SignsVappro Corrosion Control AustraliaVativeVenture BMW P/LVFVVicom AustraliaWallenius Wilhelmsen LogisticsWay Out Evacuation SystemsWeld AustraliaWilliam Adams Pty LtdWindrose International Pty LtdYTEK Pty LtdZCG Antennas

76

Credits & Acknowledgements The Victorian Defence Alliance - Land Systems Capability Directory is jointly supported by the Victorian Government and

the Australian Industry & Defence Network - Victoria (AIDN-Vic)

For further information contact the Victorian Defence Alliances:

Alliances Manager

[email protected]

www.victoriandefencealliances.org.au

ADF Imagery thanks to: Commonwealth of Australia © All Rights Reserved.

Parliament House image: Shutterstock © All Rights Reserved.

Other imagery thanks to: DMTC, Supacat & Tectonica.

Production by Durrant & Durrant.

@VicDefAlliances

Victorian Defence Alliances

BACK COVER IMAGE Victorian Built Bushmaster PMV: Bushmaster Protected Mobility Vehicle deployed to Afghanistan. The Bushmaster is designed and manufactured by Thales Bendigo, Victoria.

SUPACAT SPECIAL OPERATIONS VEHICLEDesign, engineering and systems integration work done at the Supacat facility in Port Melbourne, Victoria.

Edition 4: September 2018

victorian defence alliances | victorian defence alliances ......victoria’s defence sector is an...

Documents