· web viewdepth: 5 in (127 mm). zinc: 22 gage 0.0336 in (0.853 mm). depth: 5 in (127 mm). zinc:...

SECTION 07 71 00MANUFACTURED ROOF SPECIALTIES

Display hidden notes to specifier. (Don't know how? Click Here)

Copyright 2018 - 2018 ARCAT, Inc. - All rights reserved

PART 1 GENERAL

1.1 SECTION INCLUDES

A. Gutters and Downspouts:1. Gutter profiles/Highback.2. Square/rectangular downspouts, elbows, and offsets.3. Round downspouts, elbows, and offsets.4. Twisted downspouts.5. End caps.6. Miters.7. Outlets.8. Hangers for gutters.9. Hangers for downspouts.10. Conductor heads.

B. Roofing Accessories:1. Lead/Copper pipe vents.2. Gutter screens.3. Screen and wire.4. Vented ridge.5. Ridge roll.6. Downspout basket strainers.7. Copper soffit.8. Solder bar and nails.9. Snow guards.10. Chemical finishes.

C. Roof Panels:1. Double-lock metal roof panels.2. Snap-lock metal roof panels.

D. Decorative and Reproductive Elements:1. Finials and spires.2. Dormers and louvers3. Vents.4. Cornices.5. Cupolas.6. Chimney caps.7. Signs.

1.2 RELATED SECTIONS

07 71 00-1

A. Section 05 50 00 - Metal Fabrications.

B. Section 07 42 13 - Metal Wall Panels.

C. Section 07 62 00 - Sheet Metal Flashing and Trim.

D. Section 07 72 13 - Manufactured Curbs.

1.3 REFERENCES

A. ASTM International (ASTM):1. ASTM A240 - Standard Specification for Chromium and Chromium-Nickel Stainless

Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications.2. ASTM A527 - Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip

Process, Lock-Forming Quality.3. ASTM A568 - Standard Specification for Steel, Sheet, Carbon, Structural, and High-

Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for.4. ASTM A653 - Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or

Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process.5. ASTM B6 - Standard Specification for Zinc.6. ASTM B209 - Standard Specification for Aluminum and Aluminum-Alloy Sheet and

Plate.7. ASTM B370 - Standard Specification for Copper Sheet and Strip for Building

Construction.

1.4 SUBMITTALS

A. Submit under provisions of Section 01 30 00 - Administrative Requirements.

B. Product Data: Manufacturer's data sheets on each product to be used, including:1. Preparation instructions and recommendations.2. Storage and handling requirements and recommendations.3. Installation methods.

C. Shop Drawings: Include materials, details of construction and attachment to adjacent work.

D. LEED Submittals: Provide product data to document recycled content.

E. Verification Samples: For each product to be provided, two samples, minimum size 6 inches (150 mm) square representing actual product including thickness, color and finish.

1.5 QUALITY ASSURANCE

A. Manufacturer Qualifications: All primary products specified in this section shall be supplied by a single manufacturer with a minimum of ten years' experience.

B. Installer Qualifications: Minimum 2 years experience installing similar products.

1.6 DELIVERY, STORAGE, AND HANDLING

A. Deliver products in manufacturer's unopened packaging bearing the brand name and manufacturer's identification until ready for installation.

B. Store products in clean, dry, sheltered area off the ground until ready for use.

C. Protect products from exposure to direct sunlight and rain. Handle materials to avoid damage.

07 71 00-2

1.7 PROJECT CONDITIONS

A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results.

1.8 WARRANTY

A. Manufacturers Product Warranty: Provide manufacturer's standard limited warranty that products are free from manufacturing defects and will not break down or deteriorate under normal conditions.1. Warranty Period: 10 years.

PART 2 PRODUCTS

2.1 MANUFACTURERS

A. Acceptable Manufacturer: Chris Industries, which is located at: 290 Larkin Ave.; Wheeling, IL 60090; Toll Free Tel: 800-356-7922 ; Tel: 847-729-9292; Fax: 847-729-0340; Email:request info (); Web:www.chrisind.com

B. Substitutions: Not permitted.

C. Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

2.2 MATERIALS

A. Materials: The products listed in this specification are made using materials listed below as applicable and as specified.1. Aluminum, Mill Finish: Alloys 3003-H14 and/or 5005-H34. ASTM B209.2. Aluminum, Painted Flat Sheet: Alloys 3003-H14 and/or 5005-H34. ASTM B209.3. Aluminum: Kynar Painted Flat Sheet: Alloy 3105-H15. ASTM B209.4. Copper, Sheet Metal: Alloys 110 and/or 122; 99.9 percent pure copper. HOO, HO1,

and HO32 tempers. ASTM B370.5. Copper, Flat Sheet: Alloys 110 and/pr 122; 99.9 percent pure copper. O6O, HOO,

HO1, and HO2 tempers. ASTM B370.6. FreedomGray- Zinc/Tin Coated Copper: Alloy 110. 99.5 percent pure copper. HOO

1/8 hard temper. ASTM B370.7. Galvanized Flat Sheet: G60 or G90; LFQ (lock forming quality), ASTM A6538. Galvanized Flat Sheet, Paintgrip: G90 galvanized steel. LFQ (lock forming quality).

ASTM A527.9. Stainless Steel Flat Sheet: Alloy 304, Finish 2B, ASTM A24010. Steel, Kynar Coated Flat Sheet: ASTM A568.11. TECU Copper cladding products manufactured by KME.12. Zinc, Flat Sheet: ASTM B6.

2.3 GUTTERS AND DOWNSPOUTS

A. Gutters Profiles/Highback: Per SMACNA's Architectural Sheet Metal Manual.1. Style K: Length (in/mm): ______.

a. Highback: Available from 0 to 90 degrees.b. Depth: 4 in (102 mm).c. Depth: 5 in (127 mm).d. Depth: 6 in (152 mm).e. Depth: 7 in (178 mm).f. Depth: 8 in (203 mm).g. Material: Copper: 16 oz (0.454 kg).

07 71 00-3

h. Material: Copper: 20 oz (0.567 kg).i. Material: Aluminum Mill Finish: 0.032 in (0.81 mm).j. Material: Aluminum Painted: 0.032 in (0.81 mm).k. Material: Kynar Coated Aluminum: 0.032 in (0.81 mm).l. Material: Galvanized Steel: 26 gage, 0.0217 in (0.551 mm).m. Material: Galvanized Steel: 24 gage, 0.0276 in (0.701 mm).n. Material: Painted Steel: 26 gage, 0.0217 in (0.551 mm). White.o. Material: Painted Steel: 26 gage, 0.0217 in (0.551 mm). Brown.p. Material: Painted Steel: 24 gage, 0.0276 in (0.701 mm). White.q. Material: Painted Steel: 24 gage, 0.0276 in (0.701 mm). Brown.r. Material: Kynar Coated Steel: 24 gage, 0.0276 in (0.701 mm).

2. Box Gutters: Lengths: 120 in (3048 mm).a. Highback: Available from 0 to 90 degrees.b. Depth: 5 in (127 mm). Copper: 16 oz (0.454 kg).c. Depth: 5 in (127 mm). Aluminum mill finish: 0.032 in (0.81 mm).d. Depth: 5 in (127 mm). Galvanized Steel: 26 gage, 0.0217 in (0.551 mm).e. Depth: 5 in (127 mm). Galvanized Steel: 24 gage, 0.0276 in (0.701 mm).f. Depth: 5 in (127 mm). Galvanized Steel: 16 gage 0.0635 in (1.613 mm).g. Depth: 5 in (127 mm). Stainless Steel: 26 gage, 0.0217 in (0.551 mm).h. Depth: 5 in (127 mm). Stainless Steel: 16 gage 0.0635 in (1.613 mm).i. Depth: 5 in (127 mm). Zinc: 22 gage 0.0336 in (0.853 mm).j. Depth: 5 in (127 mm). Zinc: 26 gage, 0.0276 in (0.701 mm).k. Depth: 6 in (152 mm). Copper: 16 oz (0.454 kg).l. Depth: 6 in (152 mm). Copper: 20 oz. (0.567 kg).m. Depth: 6 in (152 mm). Aluminum mill finish: 0.032 in (0.81 mm).n. Depth: 6 in (152 mm). Galvanized Steel: 26 gage, 0.0217 in (0.551 mm).o. Depth: 6 in (152 mm). Galvanized Steel: 16 gage 0.0635 in (1.613 mm).p. Depth: 6 in (152 mm). Stainless Steel: 26 gage, 0.0217 in (0.551 mm).q. Depth: 6 in (152 mm). Stainless Steel: 16 gage 0.0635 in (1.613 mm).r. Depth: 6 in (152 mm). Zinc: 22 gage 0.0336 in (0.853 mm).s. Depth: 6 in (152 mm). Zinc: 26 gage, 0.0276 in (0.701 mm).t. Depth: 7 in (178 mm). Copper: 16 oz (0.454 kg).u. Depth: 7 in (178 mm). Copper: 20 oz. (0.567 kg).v. Depth: 7 in (178 mm). Aluminum mill finish: 0.032 in (0.81 mm).w. Depth: 7 in (178 mm). Aluminum mill finish: 0.027 in (1.60 mm).x. Depth: 7 in (178 mm). Galvanized Steel: 26 gage, 0.0217 in (0.551 mm).y. Depth: 7 in (178 mm). Galvanized Steel: 16 gage 0.0635 in (1.613 mm).z. Depth: 7 in (178 mm). Stainless Steel: 26 gage, 0.0217 in (0.551 mm).aa. Depth: 7 in (178 mm). Stainless Steel: 16 gage 0.0635 in (1.613 mm).bb. Depth: 7 in (178 mm). Zinc: 22 gage 0.0336 in (0.853 mm).cc. Depth: 7 in (178 mm). Zinc: 26 gage, 0.0276 in (0.701 mm).dd. Depth: 8 in (203 mm). Copper: 16 oz (0.454 kg).ee. Depth: 8 in (203 mm). Copper: 20 oz. (0.567 kg).ff. Depth: 8 in (203 mm). Aluminum mill finish: 0.032 in (0.81 mm).gg. Depth: 8 in (203 mm). Aluminum mill finish: 0.027 in (1.60 mm).hh. Depth: 8 in (203 mm). Galvanized Steel: 26 gage, 0.0217 in (0.551 mm).ii. Depth: 8 in (203 mm). Galvanized Steel: 16 gage 0.0635 in (1.613 mm).jj. Depth: 8 in (203 mm). Stainless Steel: 26 gage, 0.0217 in (0.551 mm).kk. Depth: 8 in (203 mm). Stainless Steel: 16 gage 0.0635 in (1.613 mm).ll. Depth: 8 in (203 mm). Zinc: 22 gage 0.0336 in (0.853 mm).mm. Depth: 8 in (203 mm). Zinc: 26 gage, 0.0276 in (0.701 mm).

3. Half Round Traditional Bead Gutter: Length (in/mm): ______.a. Depth: 5 in (127 mm). Copper 16 oz (0.454 kg).b. Depth: 6 in (152 mm). Copper 16 oz (0.454 kg).c. Depth: 7 in (178 mm). Copper 16 oz (0.454 kg).d. Depth: 8 in (203 mm). Copper 16 oz (0.454 kg).

07 71 00-4

e. Depth: 5 in (127 mm). Copper 20 oz (0.567 kg).f. Depth: 6 in (152 mm). Copper 20 oz (0.567 kg).g. Depth: 7 in (178 mm). Copper 20 oz (0.567 kg).h. Depth: 8 in (203 mm). Copper 20 oz (0.567 kg).i. Depth: 6 in (152 mm). Mill aluminum 0.032 in (0.81 mm).j. Depth: 5 in (127 mm). Galvanized 26 gage, 0.0217 in (0.551 mm).k. Depth: 6 in (152 mm). Galvanized 26 gage, 0.0217 in (0.551 mm).l. Depth: 5 in (127 mm). Galvanized 26 gage, 0.0276 in (0.701 mm).m. Depth: 6 in (152 mm). Galvanized 26 gage, 0.0276 in (0.701 mm).

4. Half Round High Back Traditional Bead Gutter: Length (in/mm): ______.a. Depth: 5 in (127 mm). Copper 16 oz (0.454 kg).b. Depth: 6 in (152 mm). Copper 16 oz (0.454 kg).c. Depth: 7 in (178 mm). Copper 16 oz (0.454 kg).d. Depth: 8 in (203 mm). Copper 16 oz (0.454 kg).e. Depth: 5 in (127 mm). Copper 20 oz (0.567 kg).f. Depth: 6 in (152 mm). Copper 20 oz (0.567 kg).g. Depth: 7 in (178 mm). Copper 20 oz (0.567 kg).h. Depth: 8 in (203 mm). Copper 20 oz (0.567 kg).i. Depth: 5 in (127 mm). Galvanized 26 gage, 0.0217 in (0.551 mm).j. Depth: 6 in (152 mm). Galvanized 26 gage, 0.0217 in (0.551 mm).k. Depth: 7 in (178 mm). Galvanized 26 gage, 0.0217 in (0.551 mm).l. Depth: 8 in (203 mm). Galvanized 26 gage, 0.0217 in (0.551 mm).

5. Half Round Double Bead Gutters: Length (in/mm): ______.a. Depth: 5 in (127 mm). Copper 16 oz (0.454 kg).b. Depth: 6 in (152 mm). Copper 16 oz (0.454 kg).c. Depth: 7 in (178 mm). Copper 16 oz (0.454 kg).d. Depth: 8 in (203 mm). Copper 16 oz (0.454 kg).e. Depth: 5 in (127 mm). Copper 20 oz (0.567 kg).f. Depth: 6 in (152 mm). Copper 20 oz (0.567 kg).g. Depth: 7 in (178 mm). Copper 20 oz (0.567 kg).h. Depth: 8 in (203 mm). Copper 20 oz (0.567 kg).i. Depth: 5 in (127 mm). Galvanized 26 gage, 0.0217 in (0.551 mm).j. Depth: 6 in (152 mm). Galvanized 26 gage, 0.0217 in (0.551 mm).k. Depth: 7 in (178 mm). Galvanized 26 gage, 0.0217 in (0.551 mm).l. Depth: 8 in (203 mm). Galvanized 26 gage, 0.0217 in (0.551 mm).

6. Half Round Reverse Bead Gutter: Length (in/mm): ______.a. Depth: 6 in (152 mm). Copper 16 oz (0.454 kg).b. Depth: 6 in (152 mm). Copper 20 oz (0.567 kg).c. Depth: 6 in (152 mm). Kynar Aluminum 0.032 in (0.81 mm).

B. Square/Rectangular Downspouts and Elbows and Offsets:1. Profile: 2 x 2 inch (51 x 51 mm):

a. Material: Galvanized Steel: 26 gage, 0.0217 in (0.551 mm). Length: 120 in (3048 mm).

2. Profile: 2 x 3 inch (51 x 76 mm).a. Material: Copper: 16 oz (0.454 kg) Length: 120 in (3048 mm).b. Material: Copper: 20 oz (0.567 kg) Length: 120 in (3048 mm).c. Material: Aluminum Painted: 0.016. Length: 120 in (3048 mm).d. Material: Aluminum Painted: 0.024 in (0.61 mm). Length: 120 in (3048 mm).e. Material: Aluminum Mill Finish: 0.019. Length: 120 in (3048 mm).f. Material: Galvanized steel: 26 gage, 0.0217 in (0.551 mm). Length: 120 in

(3048 mm).g. Material: Galvanized steel: 24 gage, 0.0276 in (0.701 mm). Length: 120 in

(3048 mm).h. Material: Steel, Paint Grip: 26 gage, 0.0217 in (0.551 mm). Length: 120 in

(3048 mm).

07 71 00-5

3. Profile: 3 x 4 inch (76 x 102 mm).a. Material: Copper: 16 oz (0.454 kg) Length: 120 in (3048 mm).b. Material: Copper: 20 oz (0.567 kg) Length (in/mm): ____.c. Material: Freedom Gray Copper: 16 oz (0.454 kg) Length (in/mm): ____.d. Material: Freedom Gray Copper: 20 oz (0.567 kg) Length (in/mm): ____.e. Material: Aluminum Mill Finish: 0.024 in (0.61 mm). Length: 120 in (3048 mm).f. Material: Kynar Coated Aluminum: 0.032 in (0.81 mm). Length (in/mm): ____.g. Material: Galvanized steel: 28 gage. Length: 120 in (3048 mm).h. Material: Galvanized steel: 26 gage, 0.0217 in (0.551 mm). Length: 120 in

(3048 mm).i. Material: Galvanized steel: 24 gage, 0.0276 in (0.701 mm). Length: 120 in

(3048 mm).j. Material: Steel, Paint Grip: 26 gage, 0.0217 in (0.551 mm). Length: 120 in

(3048 mm).k. Material: Steel, Kynar Coated: 24 gage, 0.0276 in (0.701 mm). Length (in/mm):

____.4. Profile: 4 x 5 inch (102 x 127 mm).

a. Material: Copper: 16 oz (0.454 kg) Length (in/mm): ____.b. Material: Copper: 20 oz (0.567 kg) Length (in/mm): ____.c. Material: Freedom Gray Copper: 16 oz (0.454 kg) Length (in/mm): ____.d. Material: Freedom Gray Copper: 20 oz (0.567 kg) Length (in/mm): ____.e. Material: Aluminum mill finish: 0.024 in (0.61 mm). Length: 120 in (3048 mm).f. Material: Aluminum Painted: 0.024 in (0.61 mm). Length: 120 in (3048 mm).g. Material: Kynar Coated Aluminum: 0.032 in (0.81 mm). Length (in/mm): ____.h. Material: Galvanized steel: 28 gage. Length: 120 in (3048 mm).i. Material: Galvanized steel: 26 gage, 0.0217 in (0.551 mm). Length: 120 in

(3048 mm).j. Material: Galvanized steel: 24 gage, 0.0276 in (0.701 mm). Length: 120 in

(3048 mm).k. Material: Steel, Paint Grip: 26 gage, 0.0217 in (0.551 mm). Length: 120 in

(3048 mm).l. Material: Steel, Kynar Coated: 24 gage, 0.0276 in (0.701 mm). Length (in/mm):

____.5. Elbows:

a. No. 0, Style A. 30 degree bend. Material: Same as downspouts.b. No. 1, Style A. 45 degree bend. Material: Same as downspouts.c. No. 2, Style A. 60 degree bend. Material: Same as downspouts.d. No. 3, Style A. 75 degree bend. Material: Same as downspouts.e. No. 4, Style A. 90 degree bend. Material: Same as downspouts.f. No. 0, Style B. 30 degree bend. Material: Same as downspouts.g. No. 1, Style B. 45 degree bend. Material: Same as downspouts.h. No. 2, Style B. 60 degree bend. Material: Same as downspouts.i. No. 3, Style B. 75 degree bend. Material: Same as downspouts.j. No. 4, Style B. 90 degree bend. Material: Same as downspouts.

6. Elbows Offsets: Two-piece. Profile: 3 x 4 in (76 102 mm). Style A. Material: Same as downspouts.a. Offset: 13 in (330 mm) 90 degree.b. Offset: 9.5 in (241 mm) 75 degree.c. Offset: 7 in (178 mm) 60 degree.d. Offset: 4.5 in (114 mm) 45 degree.e. Offset: 3 in (76 mm) 30 degreef. Offset: 2.5 in (63 mm) 20 degree.g. Offset: 1.5 in (38 mm) 15 degree.

7. Elbows Offsets: Two-piece. Profile: 3 x 4 in (76 x 102 mm). Style B. Material: Same as downspouts.a. Offset: 14 in (356 mm) 90 degree.

07 71 00-6

b. Offset: 10.5 in (267 mm) 75 degree.c. Offset: 8 in (203 mm) 60 degree.d. Offset: 5.5 in (140 mm) 45 degree.e. Offset: 4 in (102 mm) 30 degreef. Offset: 3.5 in (89 mm) 20 degree.g. Offset: 2.5 in (63 mm) 15 degree.

8. Elbows Offsets: Two-piece. Profile: 4 x 5 in (102 127 mm). Style A. Material: Same as downspouts.a. Offset: 14 in (356 mm) 90 degree.b. Offset: 10.5 in (267 mm) 75 degree.c. Offset: 8 in (203 mm) 60 degree.d. Offset: 5.5 in (140 mm) 45 degree.e. Offset: 4 in (102 mm) 30 degreef. Offset: 3.5 in (89 mm) 20 degree.g. Offset: 2.5 in (63 mm) 15 degree.

9. Elbows Offsets: Two-piece. Profile: 4 x 5 in (102 127 mm). Style B. Material: Same as downspouts.a. Offset: 15 in (381 mm) 90 degree.b. Offset: 11.5 in (292 mm) 75 degree.c. Offset: 9 in (229 mm) 60 degree.d. Offset: 6.5 in (165 mm) 45 degree.e. Offset: 5 in (127 mm) 30 degreef. Offset: 4.5 in (114 mm) 20 degree.g. Offset: 3.5 in ( 89mm) 15 degree.

10. Elbow Offsets: One-Piece. Profile: 2 x 3 in (51 x 76 mm). Material: Same as downspouts.a. Offset: 2 in (51 mm) 16 oz copper.b. Offset: 3 in (76 mm) 16 oz copper.c. Offset: 4 in (102 mm) 16 oz copper.d. Offset: 5 in (127 mm) 16 oz copper.e. Offset: 2 in (51 mm) 26 gage, 0.0217 in (0.551 mm) galvanized steel.f. Offset: 3 in (76 mm) 26 gage, 0.0217 in (0.551 mm) galvanized steel.g. Offset: 4 in (102 mm) 26 gage, 0.0217 in (0.551 mm) galvanized steel.h. Offset: 5 in (127 mm) 26 gage, 0.0217 in (0.551 mm) galvanized steel.

11. Elbow Offsets: One-Piece. Profile: 3 x 4 in (76 x 102 mm)). Material: Same as downspouts.a. Offset: 2 in (51 mm) 16 oz copper.b. Offset: 3 in (76 mm) 16 oz copper.c. Offset: 4 in (102 mm) 16 oz copper.d. Offset: 5 in (127 mm) 16 oz copper.e. Offset: 2 in (51 mm) 26 gage, 0.0217 in (0.551 mm) galvanized steel.f. Offset: 3 in (76 mm) 26 gage, 0.0217 in (0.551 mm) galvanized steel.g. Offset: 4 in (102 mm) 26 gage, 0.0217 in (0.551 mm) galvanized steel.h. Offset: 5 in (127 mm) 26 gage, 0.0217 in (0.551 mm) galvanized steel.

C. Round Downspouts, Elbows and Offsets:1. Copper Downspouts:

a. Material: Smooth 3 inch (76 mm), 16 oz (0.454 kg) Length: 120 in (3048 mm)b. Material: Smooth 4 inch (102 mm), 16 oz (0.454 kg) Length (in/mm). ______.c. Material: Smooth 4 inch (102 mm), 20 oz (0.567 kg) Length (in/mm). ______.d. Material: Smooth 4 inch (102 mm), 16 oz (0.454 kg) Freedom Gray. Length

(in/mm). ______.e. Material: Smooth 4 inch (102 mm), 20 oz (0.567 kg) Freedom Gray. Length

(in/mm). ______.f. Material: Smooth 5 inch (127 mm), 16 oz (0.454 kg) Length: 120 in (3048 mm)g. Material: Smooth 6 inch (152 mm), 16 oz (0.454 kg) Length: 120 in (3048 mm)

07 71 00-7

h. Material: Corrugated 3 inch (76 mm), 16 oz (0.454 kg) Length: 120 in (3048 mm)

i. Material: Corrugated 4 inch (102 mm), 16 oz (0.454 kg) Length (in/mm). ______.

j. Material: Corrugated 4 inch (102 mm), 20 oz (0.567 kg) Length (in/mm). ______.

k. Material: Corrugated 4 inch (102 mm), 16 oz (0.454 kg) Freedom Gray. Length (in/mm). ______.

l. Material: Corrugated 4 inch (102 mm), 20 oz (0.567 kg) Freedom Gray. Length (in/mm). ______.

m. Material: Corrugated 5 inch (127 mm), 16 oz Length: 120 in (3048 mm)n. Material: Corrugated 6 inch (152 mm), 16 oz (0.454 kg) Lengt5h: 120 in (3048

mm)o. Copper Elbows:

1) Smooth. Material: Same as downspouts.2) Corrugated. Material: Same as downspouts.

p. Copper One-Piece Offsets: Material: Same as downspouts.1) Smooth 3 inch (76 mm), 16 oz (0.454 kg) 2 in ( mm) offset.2) Smooth 3 inch (76 mm), 16 oz (0.454 kg) 3 in ( mm) offset.3) Smooth 3 inch (76 mm), 16 oz (0.454 kg) 4 in (102 mm) offset.4) Smooth 3 inch (76 mm), 16 oz (0.454 kg) 5 in (127 mm) offset.5) Smooth 4 inch (102 mm), 16 oz (0.454 kg) 2 in (51 mm) offset.6) Smooth 4 inch (102 mm), 16 oz (0.454 kg) 3 in (76 mm) offset.7) Smooth 4 inch (102 mm), 16 oz (0.454 kg) 4 in (102 mm) offset.8) Smooth 4 inch (102 mm), 16 oz (0.454 kg) 5 in (127 mm) offset.

q. Copper Two-Piece Offsets: Material: Same as downspouts.1) Smooth 4 in (102 mm) 16 oz (0.454 kg) 90 degree, 13.5 in (343 mm)

offset.2) Smooth 4 in (102 mm) 16 oz (0.454 kg) 75 degree, 10.5 in (267 mm)

offset.3) Smooth 4 in (102 mm) 16 oz (0.454 kg) 60 degree, 9 in (229 mm) offset.4) Smooth 4 in (102 mm) 16 oz (0.454 kg) 45 degree, 6 in (152 mm) offset.5) Smooth 4 in (102 mm) 16 oz (0.454 kg) 30 degree, 4 in (102 mm) offset.6) Smooth 4 in (102 mm) 16 oz (0.454 kg) 15 degree, 2 in (51 mm) offset.7) Corrugated 4 in (102 mm) 16 oz (0.454 kg) 90 degree, 13.5 in (343 mm)

offset.8) Corrugated 4 in (102 mm) 16 oz (0.454 kg) 75 degree, 10.5 in (267 mm)

offset.9) Corrugated 4 in (102 mm) 16 oz (0.454 kg) 60 degree, 9 in 229( mm)

offset.10) Corrugated 4 in (102 mm) 16 oz (0.454 kg) 45 degree, 6 in (152 mm)



offset.2. Aluminum Downspouts:

a. Smooth 3 inch (76 mm), 0.019 in ( mm) thick; painted. Length: 120 in (3048 mm).

b. Smooth 3 inch (76 mm), 0.019 in ( mm) thick; mill. Length: 120 in (3048 mm).c. Smooth 4 inch (102 mm), 0.024 in (0.61 mm) in thick; painted. Length: 120 in

(3048 mm).d. Smooth 4 inch (102 mm), 0.024 in (0.61 mm) thick; mill. Length: 120 in (3048

mm).e. Smooth 4 inch (102 mm), 0.032 in (0.81 mm) thick; Kynar. Length (in/mm).

_____.

07 71 00-8

f. Smooth 5 inch (127 mm), 0.024 in (0.61 mm) thick; mill. Length 120 in (3048 mm).

g. Smooth 6 inch (152 mm), 0.024 in (0.61 mm) thick; mill. Length 120 in (3048 mm).

h. Corrugated 3 inch (76 mm), 0.019 in ( mm) thick; painted. Length: 120 in (3048 mm).

i. Corrugated 3 inch (76 mm), 0.019 in ( mm) thick; mill. Length: 120 in (3048 mm).

j. Corrugated 4 inch (102 mm), 0.024 in (0.61 mm) thick; painted. Length: 120 in (3048 mm).

k. Corrugated 4 inch (102 mm), 0.024 in (0.61 mm) thick; mill. Length: 120 in (3048 mm).

l. Corrugated 4 inch (102 mm), 0.032 in (0.81 mm) thick; Kynar. Length (in/mm). _____.

m. Corrugated 5 inch (127 mm), 0.024 in (0.61 mm) thick; mill finish. Length 120 in (3048 mm).

n. Corrugated 6 inch (152 mm), 0.024 in (0.61 mm) thick; mill finish. Length 120 in (3048 mm).

o. Aluminum Elbows:1) Smooth. Material: Same as downspouts.2) Corrigated. Material: Same as downspouts.

3. Steel Downspouts:a. Smooth 3 inch (76 mm), 26 gage, 0.0217 in (0.551 mm), galvanized. Length

120 in (3048 mm).b. Smooth 3 inch (76 mm), 24 gage, 0.0276 in (0.701 mm), galvanized. Length

120 in (3048 mm).c. Smooth 4 inch (102 mm), 26 gage, 0.0217 in (0.551 mm), galvanized. Length

120 in (3048 mm).d. Smooth 4 inch (102 mm), 24 gage, 0.0276 in (0.701 mm), galvanized. Length

120 in (3048 mm).e. Smooth 5 inch (127 mm), 26 gage, 0.0217 in (0.551 mm), galvanized. Length

120 in (3048 mm).f. Smooth 5 inch (127 mm), 24 gage, 0.0276 in (0.701 mm), galvanized. Length

120 in (3048 mm).g. Smooth 6 inch (152 mm), 26 gage, 0.0217 in (0.551 mm), galvanized. Length

120 in (3048 mm).h. Smooth 6 inch (152 mm), 24 gage, 0.0276 in (0.701 mm), galvanized. Length

120 in (3048 mm).i. Smooth 3 inch (76 mm), 26 gage, 0.0217 in (0.551 mm), paint grip. Length 120

in (3048 mm).j. Smooth 4 inch (102 mm), 26 gage, 0.0217 in (0.551 mm), paint grip. Length

120 in (3048 mm).k. Smooth 5 inch (127 mm), 26 gage, 0.0217 in (0.551 mm), paint grip. Length

120 in (3048 mm).l. Smooth 6 inch (152 mm), 26 gage, 0.0217 in (0.551 mm), paint grip. Length

120 in (3048 mm).m. Corrugated 3 inch (76 mm), 26 gage, 0.0217 in (0.551 mm), galvanized. Length

120 in (3048 mm).n. Corrugated 3 inch (76 mm), 24 gage, 0.0276 in (0.701 mm), galvanized. Length

120 in (3048 mm).o. Corrugated 4 inch (102 mm), 26 gage, 0.0217 in (0.551 mm), galvanized.

Length 120 in (3048 mm).p. Corrugated 4 inch (102 mm), 24 gage, 0.0276 in (0.701 mm), galvanized.

Length 120 in (3048 mm).q. Corrugated 5 inch (127 mm), 26 gage, 0.0217 in (0.551 mm), galvanized.

Length 120 in (3048 mm).

07 71 00-9

r. Corrugated 5 inch (127 mm), 24 gage, 0.0276 in (0.701 mm), galvanized. Length 120 in (3048 mm).

s. Corrugated 6 inch (152 mm), 26 gage, 0.0217 in (0.551 mm), galvanized. Length 120 in (3048 mm).

t. Corrugated 6 inch (152 mm), 24 gage, 0.0276 in (0.701 mm), galvanized. Length 120 in (3048 mm).

u. Corrugated 3 inch (76 mm), 26 gage, 0.0217 in (0.551 mm), paint grip. Length 120 in (3048 mm).

v. Corrugated 4 inch (102 mm), 26 gage, 0.0217 in (0.551 mm), paint grip. Length 120 in (3048 mm).

w. Corrugated 5 inch (127 mm), 26 gage, 0.0217 in (0.551 mm), paint grip. Length 120 in (3048 mm).

x. Corrugated 6 inch (152 mm), 26 gage, 0.0217 in (0.551 mm), paint grip. Length 120 in (3048 mm).

y. Steel Elbows:1) Smooth. Material: Same as downspouts.2) Corrigated. Material: Same as downspouts.

z. Steel One-Piece Offsets:1) Smooth 3 in, 26 gage, 0.0217 in (0.551 mm), galvanized. 2 in (51 mm)

offset.2) Smooth 3 in, 26 gage, 0.0217 in (0.551 mm), galvanized. 3 in (76 mm)







offset.aa. Steel Two-Piece Offsets:

1) Smooth 4 in (102 mm) 25 gage, galvanized. 90 degree, 13.5 in (343 mm) offset.

2) Smooth 4 in (102 mm) 26 gage, 0.0217 in (0.551 mm), galvanized. 75 degree, 10.5 in (267 mm) offset.

3) Smooth 4 in (102 mm) 26 gage, 0.0217 in (0.551 mm), galvanized. 60 degree, 9 in (229 mm) offset.




7) Corrugated 4 in (102 mm) 26 gage, 0.0217 in (0.551 mm), galvanized. 90 degree, 13.5 in (343 mm) offset.


9) Corrugated 4 in (102 mm) 26 gage, 0.0217 in (0.551 mm), galvanized. 60 degree, 9 in (229 mm) offset.


11) Corrugated 4 in (102 mm) 26 gage, 0.0217 in (0.551 mm), galvanized. 30

07 71 00-10

degree, 4 in (102 mm) offset.12) Corrugated 4 in (102 mm) 26 gage, 0.0217 in (0.551 mm), galvanized. 15

degree, 2 in (51 mm) offset.

D. Twisted Downspouts:1. Copper Downspouts:

a. Material: Smooth 3 inch (76 mm), 16 oz (0.454 kg) Length: 120 in (3048 mm)b. Material: Smooth 4 inch (102 mm), 16 oz (0.454 kg) Length (in/mm). ______.c. Material: Smooth 4 inch (102 mm), 20 oz (0.567 kg) Length (in/mm). ______.d. Material: Smooth 4 inch (102 mm), 16 oz (0.454 kg) Freedom Gray. Length

(in/mm). ______.e. Material: Smooth 4 inch (102 mm), 20 oz (0.567 kg) Freedom Gray. Length

(in/mm). ______.f. Material: Smooth 5 inch (127 mm), 16 oz (0.454 kg) Length: 120 in (3048 mm)g. Material: Smooth 6 inch (152 mm), 16 oz (0.454 kg) Length: 120 in (3048 mm)h. Material: Corrugated 3 inch (76 mm), 16 oz (0.454 kg) Length: 120 in (3048

mm)i. Material: Corrugated 4 inch (102 mm), 16 oz (0.454 kg) Length (in/mm).

______.j. Material: Corrugated 4 inch (102 mm), 20 oz (0.567 kg) Length (in/mm).

______.k. Material: Corrugated 4 inch (102 mm), 16 oz (0.454 kg) Freedom Gray. Length

(in/mm). ______.l. Material: Corrugated 4 inch (102 mm), 20 oz (0.567 kg) Freedom Gray. Length

(in/mm). ______.m. Material: Corrugated 5 inch (127 mm), 16 oz Length: 120 in (3048 mm)n. Material: Corrugated 6 inch (152 mm), 16 oz (0.454 kg) Lengt5h: 120 in (3048

mm)o. Copper Elbows:

1) Smooth. Material: Same as downspouts.2) Corrugated. Material: Same as downspouts.

p. Copper One-Piece Offsets: Material: Same as downspouts.1) Smooth 3 inch (76 mm), 16 oz (0.454 kg) 2 in ( mm) offset.2) Smooth 3 inch (76 mm), 16 oz (0.454 kg) 3 in ( mm) offset.3) Smooth 3 inch (76 mm), 16 oz (0.454 kg) 4 in (102 mm) offset.4) Smooth 3 inch (76 mm), 16 oz (0.454 kg) 5 in (127 mm) offset.5) Smooth 4 inch (102 mm), 16 oz (0.454 kg) 2 in (51 mm) offset.6) Smooth 4 inch (102 mm), 16 oz (0.454 kg) 3 in (76 mm) offset.7) Smooth 4 inch (102 mm), 16 oz (0.454 kg) 4 in (102 mm) offset.8) Smooth 4 inch (102 mm), 16 oz (0.454 kg) 5 in (127 mm) offset.

q. Copper Two-Piece Offsets: Material: Same as downspouts.1) Smooth 4 in (102 mm) 16 oz (0.454 kg) 90 degree, 13.5 in (343 mm)

offset.2) Smooth 4 in (102 mm) 16 oz (0.454 kg) 75 degree, 10.5 in (267 mm)

offset.3) Smooth 4 in (102 mm) 16 oz (0.454 kg) 60 degree, 9 in (229 mm) offset.4) Smooth 4 in (102 mm) 16 oz (0.454 kg) 45 degree, 6 in (152 mm) offset.5) Smooth 4 in (102 mm) 16 oz (0.454 kg) 30 degree, 4 in (102 mm) offset.6) Smooth 4 in (102 mm) 16 oz (0.454 kg) 15 degree, 2 in (51 mm) offset.7) Corrugated 4 in (102 mm) 16 oz (0.454 kg) 90 degree, 13.5 in (343 mm)

offset.8) Corrugated 4 in (102 mm) 16 oz (0.454 kg) 75 degree, 10.5 in (267 mm)

offset.9) Corrugated 4 in (102 mm) 16 oz (0.454 kg) 60 degree, 9 in 229( mm)


07 71 00-11



offset.2. Aluminum Downspouts:

a. Smooth 3 inch (76 mm), 0.019 in ( mm) thick; painted. Length: 120 in (3048 mm).

b. Smooth 3 inch (76 mm), 0.019 in ( mm) thick; mill. Length: 120 in (3048 mm).c. Smooth 4 inch (102 mm), 0.024 in (0.61 mm) in thick; painted. Length: 120 in

(3048 mm).d. Smooth 4 inch (102 mm), 0.024 in (0.61 mm) thick; mill. Length: 120 in (3048

mm).e. Smooth 4 inch (102 mm), 0.032 in (0.81 mm) thick; Kynar. Length (in/mm).

_____.f. Smooth 5 inch (127 mm), 0.024 in (0.61 mm) thick; mill. Length 120 in (3048

mm).g. Smooth 6 inch (152 mm), 0.024 in (0.61 mm) thick; mill. Length 120 in (3048

mm).h. Corrugated 3 inch (76 mm), 0.019 in ( mm) thick; painted. Length: 120 in (3048

mm).i. Corrugated 3 inch (76 mm), 0.019 in ( mm) thick; mill. Length: 120 in (3048

mm).j. Corrugated 4 inch (102 mm), 0.024 in (0.61 mm) thick; painted. Length: 120 in

(3048 mm).k. Corrugated 4 inch (102 mm), 0.024 in (0.61 mm) thick; mill. Length: 120 in

(3048 mm).l. Corrugated 4 inch (102 mm), 0.032 in (0.81 mm) thick; Kynar. Length (in/mm).

_____.m. Corrugated 5 inch (127 mm), 0.024 in (0.61 mm) thick; mill finish. Length 120 in

(3048 mm).n. Corrugated 6 inch (152 mm), 0.024 in (0.61 mm) thick; mill finish. Length 120 in

(3048 mm).o. Aluminum Elbows:

1) Smooth. Material: Same as downspouts.2) Corrigated. Material: Same as downspouts.

3. Steel Downspouts:a. Smooth 3 inch (76 mm), 26 gage, 0.0217 in (0.551 mm), galvanized. Length

120 in (3048 mm).b. Smooth 3 inch (76 mm), 24 gage, 0.0276 in (0.701 mm), galvanized. Length

120 in (3048 mm).c. Smooth 4 inch (102 mm), 26 gage, 0.0217 in (0.551 mm), galvanized. Length

120 in (3048 mm).d. Smooth 4 inch (102 mm), 24 gage, 0.0276 in (0.701 mm), galvanized. Length

120 in (3048 mm).e. Smooth 5 inch (127 mm), 26 gage, 0.0217 in (0.551 mm), galvanized. Length

120 in (3048 mm).f. Smooth 5 inch (127 mm), 24 gage, 0.0276 in (0.701 mm), galvanized. Length

120 in (3048 mm).g. Smooth 6 inch (152 mm), 26 gage, 0.0217 in (0.551 mm), galvanized. Length

120 in (3048 mm).h. Smooth 6 inch (152 mm), 24 gage, 0.0276 in (0.701 mm), galvanized. Length

120 in (3048 mm).i. Smooth 3 inch (76 mm), 26 gage, 0.0217 in (0.551 mm), paint grip. Length 120

in (3048 mm).j. Smooth 4 inch (102 mm), 26 gage, 0.0217 in (0.551 mm), paint grip. Length

07 71 00-12

120 in (3048 mm).k. Smooth 5 inch (127 mm), 26 gage, 0.0217 in (0.551 mm), paint grip. Length

120 in (3048 mm).l. Smooth 6 inch (152 mm), 26 gage, 0.0217 in (0.551 mm), paint grip. Length

120 in (3048 mm).m. Corrugated 3 inch (76 mm), 26 gage, 0.0217 in (0.551 mm), galvanized. Length

120 in (3048 mm).n. Corrugated 3 inch (76 mm), 24 gage, 0.0276 in (0.701 mm), galvanized. Length

120 in (3048 mm).o. Corrugated 4 inch (102 mm), 26 gage, 0.0217 in (0.551 mm), galvanized.

Length 120 in (3048 mm).p. Corrugated 4 inch (102 mm), 24 gage, 0.0276 in (0.701 mm), galvanized.

Length 120 in (3048 mm).q. Corrugated 5 inch (127 mm), 26 gage, 0.0217 in (0.551 mm), galvanized.

Length 120 in (3048 mm).r. Corrugated 5 inch (127 mm), 24 gage, 0.0276 in (0.701 mm), galvanized.

Length 120 in (3048 mm).s. Corrugated 6 inch (152 mm), 26 gage, 0.0217 in (0.551 mm), galvanized.

Length 120 in (3048 mm).t. Corrugated 6 inch (152 mm), 24 gage, 0.0276 in (0.701 mm), galvanized.

Length 120 in (3048 mm).u. Corrugated 3 inch (76 mm), 26 gage, 0.0217 in (0.551 mm), paint grip. Length

120 in (3048 mm).v. Corrugated 4 inch (102 mm), 26 gage, 0.0217 in (0.551 mm), paint grip. Length

120 in (3048 mm).w. Corrugated 5 inch (127 mm), 26 gage, 0.0217 in (0.551 mm), paint grip. Length

120 in (3048 mm).x. Corrugated 6 inch (152 mm), 26 gage, 0.0217 in (0.551 mm), paint grip. Length

120 in (3048 mm).y. Steel Elbows:

1) Smooth. Material: Same as downspouts.2) Corrigated. Material: Same as downspouts.

z. Steel One-Piece Offsets:1) Smooth 3 in, 26 gage, 0.0217 in (0.551 mm), galvanized. 2 in (51 mm)








offset.aa. Steel Two-Piece Offsets:

1) Smooth 4 in (102 mm) 25 gage, galvanized. 90 degree, 13.5 in (343 mm) offset.

2) Smooth 4 in (102 mm) 26 gage, 0.0217 in (0.551 mm), galvanized. 75 degree, 10.5 in (267 mm) offset.


07 71 00-13










E. End Caps:1. K-Style:

a. Left and Right Profile: 5 in (127 mm) Copper.b. Left and Right Profile: 5 in (127 mm) Aluminumc. Left and Right Profile: 5 in (127 mm) Mill aluminumd. Left and Right Profile: 5 in (127 mm) Galvanized.e. Left and Right Profile: 5 in (127 mm) Paint Gripf. Left and Right Profile: 6 in (152 mm) Copper.g. Left and Right Profile: 6 in (152 mm) Aluminumh. Left and Right Profile: 6 in (152 mm) Mill aluminumi. Left and Right Profile: 6 in (152 mm) Galvanized.j. Left and Right Profile: 7 in (178 mm) Copper.k. Left and Right Profile: 7 in (178 mm) Aluminuml. Left and Right Profile: 7 in (178 mm) Mill aluminumm. Left and Right Profile: 7 in (178 mm) Galvanized.n. Left and Right Profile: 8 in (203 mm) Copper.o. Left and Right Profile: 8 in (203 mm) Aluminump. Left and Right Profile: 8 in (203 mm) Mill aluminumq. Left and Right Profile: 8 in (203 mm) Galvanized.

2. Half Round:a. Profile: 5 in (127 mm). Copper.b. Profile: 5 in (127 mm). Freedom gray copper.c. Profile: 5 in (127 mm). Aluminum.d. Profile: 5 in (127 mm). Mill Aluminum.e. Profile: 5 in (127 mm). Galvanized.f. Profile: 5 in (127 mm). Paint Grip.g. Profile: 6 in (152 mm). Copper.h. Profile: 6 in (152 mm). Freedom gray copper.i. Profile: 6 in (152 mm). Aluminum.j. Profile: 6 in (152 mm). Mill Aluminum.k. Profile: 6 in (152 mm). Galvanized.l. Profile: 6 in (152 mm). Paint Grip.m. Profile: 7 in (178 mm). Copper.n. Profile: 7 in (178 mm). Aluminum.o. Profile: 7 in (178 mm). Mill Aluminum.p. Profile: 7 in (178 mm). Galvanized.q. Profile: 7 in (178 mm). Paint Grip.

07 71 00-14

r. Profile: 8 in (203 mm). Copper.s. Profile: 8 in (203 mm). Aluminum.t. Profile: 8 in (203 mm). Mill Aluminum.u. Profile: 8 in (203 mm). Paint Grip.

F. Miters:1. K-Style Box Miters: Inside 5 in (127 mm). Copper.2. K-Style Box Miters: Inside 5 in (127 mm). Aluminum.3. K-Style Box Miters: Inside 5 in (127 mm). Mill Aluminum.4. K-Style Box Miters: Inside 5 in (127 mm). Galvanized.5. K-Style Box Miters: Inside 5 in (127 mm). Paint Grip.6. K-Style Box Miters: Inside 6 in (152 mm). Copper.7. K-Style Box Miters: Inside 6 in (152 mm). Aluminum.8. K-Style Box Miters: Inside 6 in (152 mm). Mill Aluminum.9. K-Style Box Miters: Inside 6 in (152 mm). Galvanized.10. K-Style Box Miters: Inside 7 in (178 mm). Copper.11. K-Style Box Miters: Inside 7 in (178 mm). Aluminum.12. K-Style Box Miters: Inside 7 in (178 mm). Mill Aluminum.13. K-Style Box Miters: Inside 7 in (178 mm). Galvanized.14. K-Style Box Miters: Inside 8 in (203 mm). Copper.15. K-Style Box Miters: Inside 8 in (203 mm). Aluminum.16. K-Style Box Miters: Inside 8 in (203 mm). Mill Aluminum.17. K-Style Box Miters: Inside 8 in (203 mm). Galvanized.18. K-Style Box Miters: Outside 5 in (127 mm). Copper.19. K-Style Box Miters: Outside 5 in (127 mm). Aluminum.20. K-Style Box Miters: Outside 5 in (127 mm). Mill Aluminum.21. K-Style Box Miters: Outside 5 in (127 mm). Galvanized.22. K-Style Box Miters: Outside 5 in (127 mm). Paint Grip.23. K-Style Box Miters: Outside 6 in (152 mm). Copper.24. K-Style Box Miters: Outside 6 in (152 mm). Aluminum.25. K-Style Box Miters: Outside 6 in (152 mm). Mill Aluminum.26. K-Style Box Miters: Outside 6 in (152 mm). Galvanized.27. K-Style Box Miters: Outside 7 in (178 mm). Copper.28. K-Style Box Miters: Outside 7 in (178 mm). Aluminum.29. K-Style Box Miters: Outside 7 in (178 mm). Mill Aluminum.30. K-Style Box Miters: Outside 7 in (178 mm). Galvanized.31. K-Style Box Miters: Outside 8 in (203 mm). Copper.32. K-Style Box Miters: Outside 8 in (203 mm). Aluminum.33. K-Style Box Miters: Outside 8 in (203 mm). Mill Aluminum.34. K-Style Box Miters: Outside 8 in (203 mm). Galvanized.35. Strip Miters, 90 Degrees: 5 in (127 mm). Copper.36. Strip Miters, 90 Degrees: 6 in (152 mm). Copper.37. Bay Miters, 45 Degrees: 5 in (127 mm). Copper38. Bay Miters, 45 Degrees: 6 in (152 mm). Copper39. Half Round Box Miter: Inside 5 in (127 mm). Copper.40. Half Round Box Miter: Inside 5 in (127 mm). Freedom gray copper.41. Half Round Box Miter: Inside 5 in (127 mm). Aluminum.42. Half Round Box Miter: Inside 5 in (127 mm). Mill Aluminum.43. Half Round Box Miter: Inside 5 in (127 mm). Galvanized.44. Half Round Box Miter: Inside 5 in (127 mm). Paint Grip.45. Half Round Box Miter: Inside 6 in (152 mm). Copper.46. Half Round Box Miter: Inside 6 in (152 mm). Freedom gray copper.47. Half Round Box Miter: Inside 6 in (152 mm). Aluminum.48. Half Round Box Miter: Inside 6 in (152 mm). Mill Aluminum.49. Half Round Box Miter: Inside 6 in (152 mm). Galvanized.50. Half Round Box Miter: Inside 6 in (152 mm). Paint Grip.

07 71 00-15

51. Half Round Box Miter: Inside 7 in (178 mm). Copper.52. Half Round Box Miter: Inside 8 in (203 mm). Copper.53. Half Round Box Miter: Outside 5 in (127 mm). Copper.54. Half Round Box Miter: Outside 5 in (127 mm). Freedom gray copper.55. Half Round Box Miter: Outside 5 in (127 mm). Aluminum.56. Half Round Box Miter: Outside 5 in (127 mm). Mill Aluminum.57. Half Round Box Miter: Outside 5 in (127 mm). Galvanized.58. Half Round Box Miter: Outside 5 in (127 mm). Paint Grip.59. Half Round Box Miter: Outside 6 in (152 mm). Copper.60. Half Round Box Miter: Outside 6 in (152 mm). Freedom gray copper.61. Half Round Box Miter: Outside 6 in (152 mm). Aluminum.62. Half Round Box Miter: Outside 6 in (152 mm). Mill Aluminum.63. Half Round Box Miter: Outside 6 in (152 mm). Galvanized.64. Half Round Box Miter: Outside 6 in (152 mm). Paint Grip.65. Half Round Box Miter: Outside 7 in (178 mm). Copper.66. Half Round Box Miter: Outside 8 in (203 mm). Copper.

G. Outlets:1. Square Outlets: 2 x 3 (51 x 76 mm). Copper.2. Square Outlets: 2 x 3 (51 x 76 mm). Mill aluminum.3. Square Outlets: 2 x 3 (51 x 76 mm). Galvanized.4. Square Outlets: 3 x 4 (76 x 102 mm). Copper.5. Square Outlets: 3 x 4 (76 x 102 mm). Mill aluminum.6. Square Outlets: 3 x 4 (76 x 102 mm). Galvanized.7. Square Outlets: 4 x 5 (102 x 127 mm). Copper.8. Square Outlets: 4 x 5 (102 x 127 mm). Mill aluminum.9. Square Outlets: 4 x 5 (102 x 127 mm). Galvanized.10. Oval Outlets: 2 x 3 (51 x 76 mm). Copper.11. Oval Outlets: 2 x 3 (51 x 76 mm). Mill aluminum.12. Oval Outlets: 2 x 3 (51 x 76 mm). Galvanized.13. Oval Outlets: 3 x 4 (76 x 102 mm). Copper.14. Oval Outlets: 3 x 4 (76 x 102 mm). Mill aluminum.15. Oval Outlets: 3 x 4 (76 x 102 mm). Galvanized.16. Round Outlets: 3 in (76 mm). Copper.17. Round Outlets: 3 in (76 mm). Freedom gray copper.18. Round Outlets: 3 in (76 mm). Aluminum.19. Round Outlets: 3 in (76 mm). Mill aluminum.20. Round Outlets: 3 in (76 mm). Galvanized.21. Round Outlets: 4 in (102 mm). Copper.22. Round Outlets: 4 in (102 mm). Freedom gray copper.23. Round Outlets: 4 in (102 mm). Aluminum.24. Round Outlets: 4 in (102 mm). Mill aluminum.25. Round Outlets: 4 in (102 mm). Galvanized.26. Round Outlets: 5 in (127 mm). Copper.27. Round Outlets: 5 in (127 mm). Mill aluminum.28. Round Outlets: 6 in (152 mm). Copper.29. Round Outlets: 6 in (152 mm). Mill aluminum.

H. Hangers for Gutters:1. Hidden K-Style Hangers:

a. 5 in (127 mm), brass.b. 5 in (127 mm), mill aluminum.c. 5 in (127 mm), galvanized.d. 6 in (152 mm), brass.e. 6 in (152 mm), mill aluminum.f. 6 in (152 mm), galvanized.

07 71 00-16

g. 7 in (167 mm), mill aluminum.h. 7 in (167 mm), stainless steel.

2. Wrap Around K-Style Hangers:a. 5 in (127 mm), copper.b. 5 in (127 mm), aluminum.c. 5 in (127 mm), galvanized.d. 6 in (152 mm), copper.e. 6 in (152 mm), aluminum.f. 6 in (152 mm), galvanized.

3. 40K Fascia Hangers with Snap trap:a. 5 in (127 mm), copperb. 5 in (127 mm), aluminumc. 5 in (127 mm), galvanizedd. 6 in (152 mm), coppere. 6 in (152 mm), aluminumf. 6 in (152 mm), galvanized

4. 41K Fascia Hangers with Snap trap:a. 5 in (127 mm), copperb. 5 in (127 mm), aluminumc. 5 in (127 mm), galvanizedd. 6 in (152 mm), coppere. 6 in (152 mm), aluminumf. 6 in (152 mm), galvanized

5. Half-Round Style Gutter Hangers:a. No 10 Shank and Circle Combo: 5 in (127 mm). Copper.b. No 10 Shank and Circle Combo: 5 in (127 mm). Aluminum.c. No 10 Shank and Circle Combo: 5 in (127 mm). Galvanized.d. No 10 Shank and Circle Combo: 6 in (152 mm). Copper.e. No 10 Shank and Circle Combo: 6 in (152 mm). Aluminum.f. No 10 Shank and Circle Combo: 6 in (152 mm). Galvanized.g. Decor Hanger: 6 in (152 mm). copper.h. Deck Hanger CGH6HRF: 6 in (152 mm). Copper.i. Regal Hanger: 5 in (127 mm). Copper.j. Regal Hanger: 5 in (127 mm). Mill Aluminum.k. Regal Hanger: 5 in (127 mm). Galvanized.l. Regal Hanger: 6 in (152 mm). Copper.m. Regal Hanger: 6 in (152 mm). Mill Aluminum.n. Regal Hanger: 6 in (152 mm). Galvanized.o. Regal Hanger: 7 in (178 mm). Copper.p. Regal Hanger: 7 in (178 mm). Mill Aluminum.q. Regal Hanger: 7 in (178 mm). Galvanized.r. Regal Hanger: 8 in (203 mm). Copper.s. Regal Hanger: 8 in (203 mm). Mill Aluminum.t. Regal Hanger: 8 in (203 mm). Galvanized.u. Fascia Hanger CFH5/6HRF: 5 in (127 mm). Copper.v. Fascia Hanger CFH5/6HRF: 6 in (152 mm). Copper.w. Wrap Around Hanger / Rival Strap: 5 in (127 mm). Copper.x. Wrap Around Hanger / Rival Strap: 5 in (127 mm). Aluminum.y. Wrap Around Hanger / Rival Strap: 5 in (127 mm). Galvanized.z. Wrap Around Hanger / Rival Strap: 6 in (152 mm). Copper.aa. Wrap Around Hanger / Rival Strap: 6 in (152 mm). Aluminum.bb. Wrap Around Hanger / Rival Strap: 6 in (152 mm). Galvanized.cc. Circle with Spring Clip, Nut and Bolt: 5 in (127 mm). Copper.dd. Circle with Spring Clip, Nut and Bolt: 5 in (127 mm). Freedom gray.ee. Circle with Spring Clip, Nut and Bolt: 5 in (127 mm). Aluminum.ff. Circle with Spring Clip, Nut and Bolt: 5 in (127 mm). Mill Aluminum.

07 71 00-17

gg. Circle with Spring Clip, Nut and Bolt: 5 in (127 mm). Galvanized.hh. Circle with Spring Clip, Nut and Bolt: 6 in (152 mm). Copper.ii. Circle with Spring Clip, Nut and Bolt: 6 in (152 mm). Freedom gray.jj. Circle with Spring Clip, Nut and Bolt: 6 in (152 mm). Aluminum.kk. Circle with Spring Clip, Nut and Bolt: 6 in (152 mm). Mill Aluminum.ll. Circle with Spring Clip, Nut and Bolt: 6 in (152 mm). Galvanized.

I. Hangers for Downspouts:1. Square/Rectangular:

a. Brick Hook: 2 x 3 (51 x 76 mm) galvanized.b. Brick Hook: 3 x 4 (76 x 102 mm) galvanized.c. Pipe Cleat: 2 x 3 (51 x 76 mm) copper.d. Pipe Cleat: 2 x 3 (51 x 76 mm) aluminum.e. Pipe Cleat: 3 x 4 (76 x 102 mm) copper.f. Pipe Cleat: 3 x 4 (76 x 102 mm) aluminum.

2. Straps, Square/Rectangular Downspouts:a. Metco Strap / Decoative Strap: 2 x 3 (51 x 76 mm), copper.b. Metco Strap / Decoative Strap: 2 x 3 (51 x 76 mm), aluminum.c. Metco Strap / Decoative Strap: 2 x 3 (51 x 76 mm), galvanized.d. Metco Strap / Decoative Strap: 3 x 4 (76 x 102 mm), copper.e. Metco Strap / Decoative Strap: 3 x 4 (76 x 102 mm), aluminum.f. Metco Strap / Decoative Strap: 3 x 4 (76 x 102 mm), galvanized.g. Universal Strap: Copperh. Universal Strap: Aluminumi. Universal Strap: Mill aluminumj. Universal Strap: Galvanized

3. Round:a. Downspout Bracket: 3 in (76 mm). Copper.b. Downspout Bracket: 3 in (76 mm). Zinc.c. Downspout Bracket: 4 in (102 mm). Copper.d. Downspout Bracket: 4 in (102 mm). Zinc.e. Downspout Bracket: 5 in (127 mm). Copper.f. Downspout Bracket: 5 in (127 mm). Zinc.g. Downspout Bracket: 6 in (152 mm). Copper.h. Downspout Bracket: 6 in (152 mm). Zinc.i. Brick Hook: 2 x 3 in (51 x 76 mm): Galvanized.j. Brick Hook: 3 x 4 in (76 x 102 mm): Galvanized.k. Pipe Cleat: 3 in (76 mm) round. Copper.l. Pipe Cleat: 3 in (76 mm) round. Aluminum.m. Pipe Cleat: 4 in (102 mm) round. Copper.n. Pipe Cleat: 4 in (102 mm) round. Aluminum.

4. Shanks:a. No. 1 Shank Plate for Circle: Copper.b. No. 1 Shank Plate for Circle: Freedom gray.c. No. 1 Shank Plate for Circle: Aluminum.d. No. 1 Shank Plate for Circle: Mill Aluminum.e. No. 1 Shank Plate for Circle: Galvanized.f. No 6 Shank for crown molding.g. No. 10 Shank for fascia.h. No 11 Shank for nailing to exposed rafter.i. No. 12 Shank for nailing to sheeting 4/12 pitch.j. No. 25 Shank for nailing to sheeting 6/12 pitch.k. No. 30 Shank for adjustable pitch raftersl. Shank Extension: Copper.m. Shank Extension: Galvanized.n. Spring Clip for Shank and Circle Hanger: Brass.

07 71 00-18

o. Spring Clip for Shank and Circle Hanger: Galvanized.p. Nut and Bolt for Shanks: Brass.q. Nut and Bolt for Shanks: Galvanized.

5. Rack and Key and Drives:a. Rack and Key Combo: Copperb. Rack and Key Combo: Aluminumc. Rack and Key Combo: Mill aluminumd. Rack and Key Combo: Galvanizede. No. 0 Masonery Drive: Bronze.f. No. 0 Masonery Drive: Galvanized.g. No. 4 Wood Drive: Bronze.h. No. 4 Wood Drive: Galvanized.i. No. 6 Drive: Copper.j. No. 6 Drive: Aluminum.k. No. 6 Drive: Mill Aluminum.l. No. 6 Drive: Galvanized.

J. Conductor Heads:1. Material: Match adjacent materials.

2.4 ROOFING ACESSORIES

A. Adjustable Lead/Copper Pipe Vents:1. Up to 10/12 pitch. 3 in (76 mm).2. Up to 10/12 pitch. 4 in (102 mm).3. Up to 10/12 pitch. 5 in (127 mm).

B. Gutter Screens:1. Copper Gutter Screen (W x L): 5 x 36 in (127 x 914 mm).2. Copper Gutter Screen (W x L): 6 x 36 in (152 x 914 mm).3. Copper Gutter Screen 6 in (152 mm) Half Round (W x L): 6 x 36 in (152 x 914 mm).4. 5 to 6 in (127 to 152 mm) Copper Gutter Shingle (W x L): 7.25 x 36 in (184 x 914

mm).5. 5 to 6 in (127 to 152 mm) Powder Coat Gutter Shingle (W x L): 7.25 x 36 in (184 x 914

mm).6. Galvanized Gutter Screen (W x L): 5 x 36 in (127 x 914 mm).7. Galvanized Gutter Screen (W x L): 5 x 36 in (127 x 914 mm).

C. Screen and Wire:1. Copper Wire Spool: 16 gage 0.057 in (1.613 mm). 10 lb (4.536 kg) soft copper wire.2. Copper Bug Screen: 0.011 in (0.28 mm) thick, 36 in (914 mm) wide, 1/16 in (1.5 mm)

openings.3. Copper Bird Screen: 0.047 in (1.19 mm) thick, 36 in (914 mm) wide, 1/4 in (6 mm)

openings.4. Copper Bird Screen: 0.063 in (1.60 mm) thick, 36 in (914 mm) wide, 1/2 in (13 mm)

openings.

D. Vented Ridge: 120 in (3048 mm) long sections.1. Material: Copper.2. Material: Steel.3. Material: Aluminum.4. Height: _____.5. Roof Pitch: _____.6. One piece ridge.7. Three piece ridge.

E. Ridge Roll: 120 in (3048 mm) long sections.

07 71 00-19

1. Material: 16 oz (0.454 kg) copper.2. Material: 0.0169 in (0.429 mm) aluminum, white.3. Material: 0.0169 in (0.429 mm) aluminum, brown.4. Material: 0.0169 in (0.429 mm) aluminum, mill finish aluminum.5. Material: 28 ga galvanized steel.

F. Downspout Basket Strainers:1. 3 in (76 mm). Copper2. 4 in (102 mm). Copper.3. 5 in (127 mm). Copper.4. 6 in (152 mm). Copper.5. 3 in (76 mm). Zinc.6. 4 in (102 mm). Zinc.7. 5 in (127 mm). Zinc.8. 6 in (152 mm). Zinc.

G. Copper Soffit: Length: 120 in (3048 mm).1. Material: 16 oz (0.454 mm) copper.2. Material: Aluminum.3. Half vent.4. Full vent.

H. Solder Bar and Nails:1. Material: Compatible with adjacent materials and as recommended by manufacturer.

I. Snow Guards:1. Material: As selected from manufacturer's standard shapes.2. Shapes: As selected from manufacturer's standard shapes.

J. Chemical Finishes:1. Green Patina: Quart. Applies a blue/green patina to copper.2. Copper Patina: Pint. Applies copper color to solder.3. Brown Patina: Pint. Applies a brown patina to copper.4. Black Patina: Pint. Applies a black patina to copper.

2.5 ROOF PANELS

A. Double-Lock Metal Roof Panels:1. Type: 1 inch (25 mm) deep double-lock panel, width and length as indicated on the

Drawings.2. Type: 1-1/2 inch deep (38 mm) double-lock panel, width and length as indicated on

the Drawings.3. Material: 24 gage steel, Kynar finish.4. Material: 0.032 in (0.81 mm) aluminum, Kynar finish.5. Material: Copper, natural finish.

B. Snap-Lock Metal Roof Panels:1. Type: 1-1/2 inch (38 mm) deep snap-lock panel, width and length as indicated on the

Drawings.2. Type: 1-3/4 inch deep (44 mm) snap-lock panel, width and length as indicated on the

Drawings.3. Material: 24 gage steel, Kynar finish.4. Material: 0.032 in (0.81 mm) aluminum, Kynar finish.5. Material: Copper, natural finish.

2.6 DECORATIVE AND REPRODUCTIVE ELEMENTS

07 71 00-20

A. Finials and Spires1. Shapes and Profiles: Made to specification.2. Material: Copper. Fully soldered seams.3. Material: Stainless steel.

B. Dormers and Louvers:1. Material: Copper with fully soldered seams.2. Material: Aluminum with riveted seams.3. Material: Made to specification.4. Arched Top Louver.5. Bordeau.6. Chateau.7. Copper Dormer.8. Copper Vented Dormer.9. Divers Helmet.10. Dormer Framing.11. Eyebrow.12. Half Round Dormer.13. Hillshire Dormer.14. The Keith Dormer.15. Lead Coated Dormer.16. Mont Blanc Dormer.17. Round Louver.18. Smart 1 Dormer.19. Square Dormers.20. Square Vented Dormer.21. Tombstone Louver.22. Triangle Louver.

C. Vents: Made to Specification.

D. Cornices: Made to Specification.

E. Cupolas: Made to Specification.

F. Chimney Caps: Made to Specifications.

G. Signs: Made to Specifications.

PART 3 EXECUTION

3.1 EXAMINATION

A. Do not begin installation until substrates have been properly prepared.

B. If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.

3.2 PREPARATION

A. Clean surfaces thoroughly prior to installation.

B. Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.

3.3 INSTALLATION

A. Install products in accordance with manufacturer's recommendations, approved submittals,

07 71 00-21

and in proper relationship with adjacent construction.

3.4 CLEANING AND PROTECTION

A. Clean products in accordance with the manufacturers recommendations.

B. Protect installed products until completion of project.

END OF SECTION

07 71 00-22

· web viewdepth: 5 in (127 mm). zinc: 22 gage 0.0336 in (0.853 mm). depth: 5 in (127 mm). zinc:...

Documents