AVIA 202 Aircraft Systems 1Airplane Systems Hangar ExperiencePhoto Scavenger Hunt

Type your name here: Michelle Crocco

Instructions:

As outlined in the course syllabus, the class will meet at the maintenance hangar at 2310 West North Temple where you will be given an opportunity to fulfill the requirements of this assignment.

Aerial View courtesy of Google Earth

Bring a Digital Camera.

You will need the ability to take digital pictures. You may use any digital device to create photos of the objects described in the tasks below. Each photo must depict the object described in the task and a unique object that will be present in all photos you submit on this assignment. This unique object is your signature on the photo. It assures the photo was taken by you. This object may not be photo-shopped into the photo.

Tasks

Each task below will ask you to paste a photo or cropped photo you took that depicts a component found on either a Piper PA28 181, C172SP, or PA28R-201. (Depending on which airplanes are available for inspection, not all questions will be applicable)

Submission

Submit your completed assignment in pdf format to the drop box on Canvas. Saving this MS Word document in pdf format will compress the photos to a manageable size for upload to Canvas.

AVIA 202 Aircraft Systems 1Airplane Systems Hangar ExperiencePhoto Scavenger Hunt

1. In the space below paste a photo of the crankcase of a horizontally opposed O-360-A4M 180 HP aircraft engine. Make sure your unique object is in contact with the crankcase.

2. In the space below paste a photo of the Number 1 cylinder of an opposed O-360-A4M 180 HP aircraft engine.

3. In the space below paste a photo of a pushrod tube on an O-360-A4M, 180 HP aircraft engine. Make sure your unique object is in contact with the pushrod tube.

4. In the space below paste a photo of the cooling baffles on an O-360-A4M, 180 HP aircraft engine. Make sure your unique object is in contact with the cooling baffles.

5. In the space below paste a photo of the intake manifold of an O-360-A4M, 180 HP aircraft engine. Make sure your

unique object is in contact with the intake manifold.

6. In the space below paste a photo of the exhaust manifold of an O-360-A4M, 180 HP aircraft engine. Make sure your unique object is in contact with the exhaust manifold.

7. In the space below paste a photo of the up draft carburetor of an O-360-A4M, 180 HP aircraft engine. Make sure your

unique object is in contact with the up draft carburetor.

8. In the space below paste a photo of the muffler heat shroud of an O-360-A4M, 180 HP aircraft engine. Make sure your unique object is in contact with the muffler heat shroud.

9. In the space below paste a photo of the air filter of an O-360-A4M, 180 HP aircraft engine. Make sure your unique object is in contact with the air filter.

3

10. In the space below paste a photo of the electric fuel pump on an O-360-A4M, 180 HP aircraft engine. Make sure your unique object is in contact with the electric fuel pump.

11. In the space below paste a photo of the gascolator on an O-360-A4M, 180 HP aircraft engine. Make sure your unique object is in contact with the gascolator.

12. In the space below paste a photo of the oil filter on an O-360-A4M, 180 HP aircraft engine. Make sure your unique object is in contact with the oil filter.

13. In the space below paste a photo of the oil drain on an O-360-A4M, 180 HP aircraft engine. Make sure your unique object is in contact with the oil Drain.

14. In the space below paste a photo of a magneto on an O-360-A4M, 180 HP aircraft engine. Make sure your unique object is in contact with a magneto.

4

15. In the space below paste a photo of the spark plug on an O-360-A4M, 180 HP aircraft engine. Make sure your unique object is in contact with a spark plug.

16. (if available) In the space below paste a photo of the propeller governor on an IO-360-C1C6, 200 HP aircraft engine. Make sure your unique object is in contact with a propeller governor.

17. (if available) In the space below paste a photo of the tube linking the propeller governor with the propeller hub on an IO-360-C1C6, 200 HP aircraft engine. Make sure your unique object is in contact with a tube linking the propeller governor with the propeller hub.

18. In the space below paste a photo of the servo regulator or fuel control on an IO-360-C1C6 200 HP, or IO-360-L2A 180 HP aircraft engine. Make sure your unique object is in contact with a servo regulator or fuel control.

5

19. (if available) In the space below paste a photo of the rocker cover oil drain tube on an IO-360-C1C6 200 HP aircraft engine. Make sure your unique object is in contact with a rocker cover oil drain tube.

20. (if available) In the space below paste a photo of the EGT thermal couple on an IO-360-C1C6 200 HP, or IO-360-L2A 180 HP aircraft engine. Make sure your unique object is in contact with an EGT thermal couple.

21. (if available) In the space below paste a photo of the oil cooler on an IO-360-C1C6 200 HP, or IO-360-L2A 180 HP aircraft engine. Make sure your unique object is in contact with the oil cooler.

22. (if available) In the space below paste a photo of the fuel injector on an IO-360-C1C6 200 HP, or IO-360-L2A 180 HP aircraft engine. Make sure your unique object is in contact with a fuel injector.

6

23. (if available) In the space below paste a photo of the fuel distributor on an IO-360-C1C6 200 HP, or IO-360-L2A 180 HP aircraft engine. Make sure your unique object is in contact with the fuel distributor.

24. (if available) In the space below paste a photo of the engine driven fuel pump on an IO-360-C1C6 200 HP, or IO-360-L2A 180 HP aircraft engine. Make sure your unique object is in contact with the engine driven fuel pump.

25. (if available) In the space below paste a photo of the MAP sensor port on an IO-360-C1C6, 200 HP aircraft engine. Make sure your unique object is in contact with the MAP sensor port.

Once you have pasted the appropriate pictures, upload this assignment to the Canvas Drop Box for the assignment.

7