· web viewthe server shall be capable of locking the monitoring window. the server shall...

(Project No.) (Project Name)(Date) (Project Location)

ARCHITECT & ENGINEER SPECIFICATIONS

SECTION 28 23 19Digital Video Servers and Analog Recording Devices

Sony NSR-500 Series Network Surveillance Servers(NSR-500:00, NSR-500:01, NSR-500:02, NSR-500:04, NSR-500:08 and NSR-500:12)

PART 2 – PRODUCTS

2.01 NETWORK VIDEO SERVER SPECIFICATIONS

A. GENERAL SPECIFICATIONS:

1. The NSR-500 Series network surveillance server (called “server” as described below) shall be a Linux-based server, capable of simultaneously recording multiple streams* in any combinations of JPEG/ MPEG-4/H.264 (baseline profile) including multiple instances of the same codec from a camera/encoder depending on the camera capabilities.

*Regarding to the Sony’s devices which are available for multiple streams, see “J. SUPPORTED DEVICES”.

2. The maximum recording frame rate at Full-HD (1920 x 1080) in H.264 (baseline profile) shall be 480 fps.

3. The maximum recording bit rate at Full-HD (1920 x 1080) in H.264 (baseline profile) shall be 64 Mbps.

4. The server shall be capable of registering up to 16 network cameras.The server shall have 6 different internal hard disk drive (HDD) storage capacities as the following table.

NSR-500:00 NSR-500:01 NSR-500:02 NSR-500:04 NSR-500:08 NSR-500:12

internal HDD ― 1 TB x 1 1 TB x 2 1 TB x 4 2 TB x 4 2 TB x 6

Physicalcapacity ― 1 TB 2 TB 4 TB 8 TB 12 TB

Recordingcapacity(Approx.)

― 880 GB 1.7 TB 2.6 TB 5.4 TB 9.0 TB

SelectableRAID level

(*Default setting)―

No RAID RAID0*, 1

RAID10 (1+0),

5*,5+Hot Spare

Capacities for hard disk drives are based on the following equation for Physical capacity 1 GB: 1,000 x 1,000 x 1,000 = 1 billion bytesRecording capacity 1 GB: 1,024 x 1,024 x 1,024 = 1.073 billion bytes (Approx.)

Sony recommends SIers to install Sony’s optional HDDs (NSBK-HS05:01 for 1 TB or NSBK-HS05:02 for 2 TB).

The server shall supply optional Licenses for system expansion. The optional NSBK-CL05 allows the operator to add extra licenses, and the operator can connect up to 24 network cameras to a single server (including the original 16 cameras).

For example, NSR-500:12 with a 12 TB (2 TB x 6) internal HDD, the server can record more than 300 hours of high-quality full-HD images compressed at 4 Mbps with a frame rate of 30 fps from up to 16 network cameras.

5. The server shall be RAID 0, 1, 10 (1+0) and 5 capable to help prevent data loss in case of HDD failures and HDDs shall be hot swappable.The hard disk storage units of the server shall be configured with high redundancy. They feature RAID implementations and hotswappable capabilities to protect important data against hard disk failure, 24 hours a day. The operator can choose from RAID 10 (1+0), RAID 5 or RAID 5 + Hot Spare, depending on the operator’s system requirements.

6. The server shall support all devices listed in section “J. SUPPORTED DEVICES” of this document.

7. The server shall support G.711 and G.726 audio. The server shall be capable of decoding and displaying in multi-screen or single screen the decoded streams, and have I/O terminal interfaces to accept alarm triggers.

8. The server shall support Uninterrupted Power Supply (UPS) controlled via RS-232C.

9. The server shall have an HD 15-pin VGA connector to allow programming, local live viewing as well as search and playback of stored video.

10.The server shall have the ability to display, record, and playback video from cameras located at multiple remote locations over an IP network.

11.The server shall support the following recording modes: manual, schedule based, alarm, and event (or activity). Additionally, the server shall support trigger based triggered recording when used with Sony cameras that support intelligent motion detection or object detection, such as the SNC-CH/DH Series, SNC-RH/RS Series, SNT-EX/EP Series, SNC-DM160, SNC-DM110, SNC-DS60, SNC-DS10, SNC-CM120, SNC-CS20, SNC-CS50, SNC-DF50, SNC-DF80, SNC-DF85, SNC-RX Series and SNC-RZ50.

VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS28 23 19 - 2

12.The server shall have an Auto Logon function, which allows users to log on automatically. The Auto Logon function is activated through the Administration Menu.

13.The server shall have Easy Setup and Easy Operation. The server shall detect Sony’s network cameras in a network and sets up all the parameters of each camera in a step-by-step manner with a dedicated setup wizard. This drastically reduces the time required for system installation. Images from cameras are assigned automatically to a monitor layout menu, so that the operator can start monitoring instantly.

14.The server shall have a ‘Camera Auto Registration’ function. This function shall allow the user to automatically set the following:

a) Detect all Sony IP cameras or Sony video servers (encoders) installed on the same network segment automatically.

b) Detect camera type.

c) Assign IP address to cameras.

d) Register and configure the cameras to the server.

e) Generate appropriate monitoring layout based on number of registered cameras and start displaying live video from detected cameras.

15.The server shall also have a quick recording configuration capability with a simple wizard. The function shall allow the user to select either schedule recording or motion based alarm recording:

a) If schedule recording is selected, the server automatically set the recording parameters such as H.264 (baseline profile), MPEG-4, and JPEG codecs, resolution, picture quality (level/kbps) or frame rate (fps) based on user-predefined number of days (up to 365 days) to store recorded video, or based on a maximum resolution of cameras/encoders.

The parameters shall also be calculated based on number of cameras and available storage capacity.

b) If alarm recording is selected, the system automatically set the recording parameters such as H.264 (baseline profile), MPEG-4, and JPEG codecs, resolution, picture quality (level/kbps) or frame rate (fps) based on a maximum resolution of cameras/encoders. Alarms shall be based on VMD (Camera).


16.Parameters that were set with the wizard shall be capable of being changed manually.

17.An operator with proper rights shall be able to manually record video by clicking the REC button on the GUI or configure record settings manually without using the wizard.

18.Pre- and post-alarm duration shall be configurable for all event or alarm based recording.

19.The server shall be capable of simultaneous local and remote viewing, playing back, recording and exporting video.

20.The server shall support simultaneous video and audio export. Video files shall be in Sony CAM file format and audio shall be in Sony AUD file format. The Media File Player application can be exported with the video and audio files so that video/audio can be played back from a Windows® PC without installing any application software. The Media File Player application shall also allow exporting files to AVI format.

21.The server shall have the capability of using any of the following as a trigger to perform a given action:a) Sensor Input trigger to the camera, or the serverb) Video Motion Detection (VMD) (Camera) triggerc) System Alertsd) Barix Barionet, 3rd Party I/O Boxe) Logical Sensor Input (Requires HTTP API available upon request)f) Camera tampering alert from Sony cameras

Using any of the above triggers or manually via the GUI, the following actions shall be capable of being initiated:a) Camera Action

Preset - Change camera's preset position Tour - Start camera's tour Output - Change camera's output state

b) I/O Device Action Sensor Output (Server) Output - Change logical output state of Barix Barionet

c) System Action E-mail - Send an E-mail with/without an image to a registered

SMTP client address Change Layout - Change layout on a sever Beep - Sound a ‘Beep’ on a server

d) Client Action Change Layout - Change layout on a client Beep - Sound a ‘Beep’ on a client

e) Alarm Notification


The server shall have the capability to schedule any of the actions above.

22.The server shall be capable of recording and storing images at frame rates between 1 to 30 frames per second on a per camera basis.

23.The server shall have 3 types of searches on the main GUI:a) Date/Time – This can be performed on a selected camera or all

monitored cameras.b) Quick Playback – Playback start point is user configurable with the

default setting being 10 seconds.c) Alarm history – A list of alarm events is displayed at the bottom of

the GUI. When an alarm event is double-clicked, it is played back in the active window.

24.The playback control pane shall be active when any of the following search methods, date/time, quick playback, alarm history based, is selected to allow the operator to fast-forward, rewind, pause, use a slider to scroll through the clip, or jump to the next or previous alarm.

25.The server shall also have a detailed search capability providing the operator with a ‘Search’ GUI that allows multiple cameras to be searched simultaneously. Search images of up to 9 cameras can be displayed in the playback pane.

The server shall support simultaneous search and playback of up to 9 cameras for normal search operations. The server shall allow the operator to enter a date/time range, select multiple cameras, and select any combination of the recording type (Schedule, Manual, Alarm, and/or Event). The search results will be displayed in the pane at the bottom of the GUI in a timeline. The timeline view can be changed to a list view. Cameras that are on the timeline or events that are listed in the list view can be selected and the images associated with the search results shall be displayed in the playback pane.

26.The server shall provide playback controls of the searched video by using the playback control pane. When using the timeline, the vertical bar representing the displayed image can be dragged to the left or right to scroll through the video.

27.To export video, the server shall allow the operator to select an IN and OUT point on the timeline. Exporting video from multiple cameras within the selected range shall also be possible. The server shall also provide the ability to export multiple events from the list view.


28.The server shall have an e-flip function, which can be used to rotate an upside-down image so that it is displayed in the proper orientation.

29.The server shall support Pan/Tilt/Zoom (PTZ) controls over TCP/IP.

30.The server shall allow the operator to directly control Pan/Tilt/Zoom (PTZ) via control pane, or using a mouse on the displayed live image. The server shall support Sony system controller RM-NS1000 (optional) and also 3rd party joystick from CH Products for variable Pan/Tilt/Zoom (PTZ) control.

31.The server shall allow the operator to register Pan/Tilt/Zoom (PTZ) camera/encoder presets and the ability to recall such presets. Presets shall be stored on the camera/encoder. The server shall support the maximum number of presets that the camera/encoder allows.

32.The server shall have the capability to provide camera tours on a demand basis from the main GUI or by using an alarm trigger.

The server shall support shadow tours on the SNC-RH/RS Series. Shadow tour learns an operator's Pan/Tilt/Zoom (PTZ) control actions (including those made with a joystick) and then repeats the motions through the main GUI or RM-NS1000.

33.The server shall have a capability to create multi-camera viewing layouts by defining number of rows and columns.

34.The server shall support the import and export of site layout images and/or icons in BMP and JPEG file formats.

35.The server mapping layouts shall be capable of being freely configured. This function shall allow customizations and modifications to layouts to incorporate added icons or links.

36.The server shall support multi-level layout mapping in the GUI, with each layout capable of linking an icon or action button to another layout or camera image, or to a specific monitor window.

37.The server shall have an ability to perform a layout tour, which means it can switch user-specified layouts sequentially.


38.The server shall have a custom user setting, which allows the administrator to define any combination of permissions and assign that level of access to specific users. The permissions shall be as follows:

<Level 5 Administrator>a) User Configurationb) Administrator Menu Setting

<Level 4 System Configuration>c) Schedule Configurationd) Device Configuratione) Sever Configurationf) Layout Configurationg) GUI Configurationh) Manual Action Configuration

<Level 3 Recording File manipulation>i) Manual Deletion / Protectionj) Log controlk) Export Controll) Exit Server

<Level 2 Basic Operation>m) Search & Playbackn) Camera Controlo) Output controlp) Layout Controlq) Manual Recordr) Manual Actions) Capture Controlt) Display Controlu) Alarm History Control

<Level 1 Monitoring Only>v) Exit Application

39. The server shall have 5 pre-assigned user levels as follows:

Level 1: Monitoring Only.Level 2: Basic OperationLevel 3: Recording File ManipulationLevel 4: System ConfigurationLevel 5: Administrator

40.The server shall be configurable for centralized server management in a master/slave configuration.


41.The server shall support 3rd party iSCSI (Internet Small Computer System Interface) storages.

42.The server shall be capable of locking the monitoring window.

43.The server shall support multiple languages as follows:a) Englishb) Japanesec) Frenchd) Germane) Italianf) Spanishg) Simplified Chineseh) Traditional Chinesei) Russianj) Koreank) Polishl) Portuguese (Brazil)

44.The server shall support VMD (Camera) including both the Motion Detection and Object Detection functions for the camera. Motion Detection function shall detect moving objects such as people or cars while minimizing false alarms caused by noise and repetitive motion patterns. Object Detection function shall detect when a moving object has stopped (unattended) or when an object has moved from its original position (removed). These functions shall be mutually exclusive for each camera.

45.The server shall be capable of saving configuration data of cameras, I/O boxes and audio for backup.

46.The server shall be capable of restoring configuration data of cameras, I/O boxes and audio using the saved configuration data.

47.The server shall be capable of storing log files of user login, alarm event, and other system errors.

48.The server shall support data overwriting and clean-up function to keep enough capacity for recording.

49.The server shall have an API for integration with 3rd party software applications.

50.The server shall support camera tampering detection on Sony cameras equipped with this function. This function alerts the operator if the camera has been tampered with. Tampering can include spraying the


camera lens, covering it with a cloth, or changing the mounting direction.

51.The server shall have an Icon Highlight function, which allows operators to assign alarms, such as VMD (Camera),,sensor inputs, and Tampering alarms, to an icon so that the frame surrounding the icon blinks in red on alarm. The icon shall stop blinking either when clicked or when the alarm ends, depending on user settings.

B. VIDEO SPECIFICATIONS:

1. The server shall support video streams that are encoded in H.264 (baseline profile) MPEG-4 and JPEG.

2. Recorded image streams in H.264 (baseline profile), JPEG and MPEG-4 shall be in Sony’s CAM original file format..

3. The server shall be capable of accepting multiple video streams from IP camera simultaneously over TCP/IP.

4. The server shall be capable of up to x25 digital zoom when playing back recorded video.

5. The server shall be capable of supporting cameras that have the ‘Light Funnel’ function. The server shall be capable of manually setting ‘Light Funnel’ to ‘Always ON’ or ‘Always OFF’. The server shall also be capable of setting ‘Light Funnel’ to ‘Auto’ (activation based on environmental lighting conditions) or to sync it with the camera’s ‘Day/Night’ function. The server shall be capable of recording, and displaying camera streams when resolution dynamically changes as a result of the ‘Light Funnel’ function turning on or off. The maximum resolution when the ‘Light Funnel’ function is ON shall be 640 x 480.

6. The server shall support the following functions on cameras equipped with these functions: View-DR (Visibility Enhanced Wide Dynamic Range) – produces images with very wide dynamic ranges, XDNR (Excellent Dynamic Noise Reduction) – reduces AGC noise in order to provide clear images without motion blur and Visibility Enhancer (VE) － optimizes the brightness and color reproduction of an image dynamically on a pixel-by-pixel basis to provide better visibility in poor backlight conditions.

7. Each monitor window shall be capable of indicating, but not necessarily be limited to, the following items:

a) Camera nameb) Status (recording type, playback status and speed)


c) Time (current date and time of live images or the recording date and time of play back images)

d) Display Image per Seconde) Bandwidth used for transferring images via network connectionf) Frame Rate

8. The server shall have the ability to independently set record rates for each camera, not to exceed the total frame rate by specification.

9. The server shall have default layouts such as 2 x 2, 3 x 3, 4 x 4 and pre-customized layouts.

10. The server shall be capable of displaying live images and playing back images in any monitor window of a selected monitoring layout. Playback of any camera in a particular window in a multi-camera display configuration shall not stop live viewing of cameras in the other windows.

11. The server shall be capable of taking a still image snapshot in JPEG format.

12. The server shall have pre-alarm and post-alarm recordings upon detection of events such as sensor input and VMD (Camera). Pre- and post-alarm durations shall be user configurable.

13. The server shall be capable of exporting recorded CAM files, AUD files, JPEG still images, configuration data and log files to the USB flash memory.

14. The server shall be capable of restoring configuration data, importing BMP and JPEG images for site layouts and icons, from the USB flash memory.

15. The server shall support simultaneous video and audio export. Video files shall be in Sony CAM file format and audio shall be in Sony AUD file format. The Media File Player application can be exported with the video and audio files so that video/audio can be played back from a PC without installing any application software. AVI files can be exported from the Media File Player application.


C. AUDIO SPECIFICATIONS:

1. The server shall be capable of audio monitoring, recording and play back with G.711 and G.726 compression. Users can enable or disable the audio recording function.

2. The server shall support the same number of audio channel inputs as the number of licensed cameras.

3. The server shall be capable of exporting both audio and video. Synchronization shall be best effort.

D. NETWORK SPECIFICATIONS:

1. The server shall support 2 network ports. The network interface shall be via 8-pin RJ-45 connector, 1000Base-T/100Base-TX/10Base-T Ethernet.

2. The server shall provide video surveillance over TCP/IP.

3. The server shall support FTP server function.

4. The server shall have both NTP server as well as NTP client functionalities.

5. The server shall support SNMP mib-2.system (1.3.6.1.2.1.1) protocols. The following objects can be set freely via NSR-500's Setup Menu. - mib-2.system.sysContact (1.3.6.1.1.4)- mib-2.system.sysName (1.3.6.1.1.5) - mib-2.system.sysLocation (1.3.6.1.1.6)Enterprises-MIB

6. The server shall support SNMP traps for notification. SNMP manager can receive NSR-500's original trap (1.3.6.1.4.1.7933.1.20.0.10).- Each trap includes nine objects. Every traps use the same OID (Object ID).- "Trap List" sheet shows "Severity", "Device" and "Description" of each trap.- MIB information is also available.

7. The server shall provide alarm relay output when the server finds any video loss caused by the network disconnection. The alarm relay shall be electrically isolated from the server.

8. The server shall be capable of being connected to a NTP server.


9. The server shall capable of IP Address Filtering. Up to 24 different IP address or IP address ranges can be configured.


E. SYSTEM REQUIREMENTS:

1. The server shall require the following user provided hardware for system setup and operation:

a) Sony network cameras, 3rd party supported network cameras and/or analog cameras

b) Monitor (PC display supporting analog RGB input)c) USB keyboardd) USB mousee) RM-NS1000 USB system controller (optional) or CH products USB

joystick (optional)f) Network switchg) 1000Base-T/100Base-TX/10Base-T cable(s)h) USB flash memory device (required for backing up system

information such as logs).

2. The server shall provide the following selection of monitor as generic monitor type:

a) Generic LCD Display; LCD Panel 1024 x 768; 40 – 70 Hzb) Generic LCD Display; LCD Panel 1280 x 1024; 50 – 75 Hzc) Generic LCD Display; LCD Panel 1360 x 768; 60 Hzd) Generic LCD Display; LCD Panel 1600 x 1200; 60 Hze) Generic LCD Display; LCD Panel 1920 x 1080; 60 Hzf) Generic LCD Display; LCD Panel 1920 x 1200; 60 Hzg) Generic CRT Display; Monitor 1024 x 768; 50 – 70 Hzh) Generic CRT Display; Monitor 1280 x 1024; 50 – 90 Hzi) Generic CRT Display; Monitor 1600 x 1200; 50 – 90 Hz

3. The server shall be capable of specifying the following display resolutions:

RGB output:a) Full High-Definition (1920x1080)b) WUXGA (1920x1200)c) UXGA (1600x1200)d) Full Wide XGA (1360x768)e) SXGA (1280x1024)f) XGA (1024x768)

4. The server shall be capable of backing up system information as logs on USB flash memory. The server shall require a device that supports general USB Mass Storage Class specifications.

5. The server shall support the RM-NS1000 system controller via a USB 2.0 interface.


The RM-NS1000 shall have dedicated buttons for actions, function keys, a numeric keypad, a Jog/Shuttle dial, a 3-axis joystick and a multi function menu displayed on its LCD. The LCD shall indicate the current operational status.

The RM-NS1000 shall support bi-directional audio. The interfaces shall be a headphone jack for inbound audio, and a built-in microphone or a plug-in-power MIC input jack for outbound audio (via Real Shot Management Advanced Client only)

The RM-NS1000 shall allow operators to perform a variety of operations such as:

a) Selecting a layoutb) Selecting a monitor framec) Assigning a camera to the selected monitor framed) Switching between Live Monitoring/Playbacke) Camera control (Pan/Tilt/Zoom, adjusting iris and focus)f) Assigning and recalling camera presetsg) Registering camera ‘Shadow Tour’ movementsh) Start and stop camera guard tour and ‘Shadow Tour’i) Start and stop Layout Tourj) Capturing still images (JPEG)k) Start/stop manual recording l) Searching for and playing back recorded images (except ‘Object

Search’)m) Playback control (pausing/frame-by-frame forwarding/rewinding) by

Jog/Shuttle dialn) Exporting recorded imageso) Locking the system controller operation (password/timeout)p) Monitor inbound audio with optional headphonesq) Use the built-in microphone or optional external microphone for

outbound audio (via Real Shot Management Advanced Client only)r) Mouse operation using the joystick (mouse emulation):

Pan/Tilt/Zoom, returning all cameras to Preset position 1

6. The server shall also support the CH Products IP Desktop USB joystick via a USB 2.0 interface.

The CH Products IP Desktop USB joystick allows users simple operation using a joystick and dedicated buttons for actions such as preset and Pan/Tilt/Zoom (PTZ).

7. The integrator shall clarify system requirements to ensure proper installation and operation of the software with the manufacture or its representatives.


F. MECHANICAL SPECIFICATIONS:

1. The server shall provide the capabilities of indicating its operational status by LEDs such as RAID, ACCESS, HDD (1 to 6), POWER, SYSTEM, FAN, REC, NETWORK (1 and 2), and STATUS.

2. The server shall have 4 USB 2.0 ports (2 on the front panel and 2 on the rear panel) for use of a USB mouse, keyboard, USB flash memory or system controller RM-NS1000.

3. The server shall be capable of exporting recorded images to USB flash memory.

4. The server shall have the capability of being configured with an uninterruptible power supply (UPS) through RS-232C serial connection. A cable shall not be supplied by the manufacturer.

5. The server shall provide the connection to up to 8 channel sensor inputs from external sensors that are electrically isolated from the unit.

6. The server shall provide up to 8 channel alarm outputs through the dedicated alarm output connector, that are electrically isolated from the unit.

7. The server shall require a mechanical key lock to physically access the HDD.

8. The server shall have 2 RJ-45 sockets.

9. The dimensions of the server shall be approximately 17 3/8 inches (W) x 3 1/2 inches (H) x 15 1/2 inches (D), 440 mm (W) x 89 mm (H) x 392 mm (D) (excluding protrusions) (EIA 2U) .The server shall be capable of being mounted to standard 19” rack.

10. The weight of the server shall be approximately 15.0 lb (6.8 kg) excluding HDD. (HDD unit: 1.43 lb (0.65 kg) x number of HDD units installed)


G. REMOTE CLIENT SPECIFICATIONS:

1. The server shall include support for Remote Configuration and Management Software (Real Shot Management Advanced client software, called “client software” as described below) to allow a user to remotely configure the unit, view live images, play back and search the desired recorded images via a local area network, or via the Internet using NAT (Network Address Translation) technology.

2. The client software shall be capable of following items:a) Live video monitoring from selected cameras.b) Camera control (Pan/Tilt/Zoom, adjusting iris and focus) from the

main GUI c) Recording configuration (manual/schedule/alarm/event-based)d) Playing back recorded imagese) Search by Time and Date, Camera, REC Type (Schedule, Manual,

Alarm, Event)f) Search by alarm typeg) Assigning and recalling camera presetsh) Registering camera guard tour and ‘Shadow Tour’ movementsi) Start and stop camera guard tour and ‘Shadow Tour’j) Layout tour (monitor sequence mode)k) Monitor frame sequence: up to 16 camera images can be displayed

sequentially in individual monitor frames at a user-specified interval within the range from 3 sec to 60 sec.

l) Bi-directional audio supportm) Flexible customizable layout and mapping editor up to 255 layouts.

Images and monitor frames in the custom layout can be duplicated using the Copy button.

n) Setting hotspots in a custom layout of the main monitor or the 2nd monitor

o) 2nd monitor configuration －2nd monitor is used for either hotspot monitoring or live monitoring. The following layouts are available: 1 x 1, 2 x 2, 3 x 3 and 4 x 4.

p) Setting a number of triggers to perform actions including, triggering alarms, layout changes, camera tours and e-mail notifications

q) E-flip functionr) Icon highlightings) Defining and providing system user profiles and user permissions

for use of specified functions.t) Displaying an alarm logu) Video/Audio exportv) Setting camera ‘Global Camera ID’ in multi-server systems.w) Set Camera tampering detection on cameras equipped with this

functionx) Auto logony) Support the RM-NS1000 system controller


H. ENVIRONMENTAL SPECIFICATIONS:

1. The NSR-500 Series operating temperature shall be within the range of +41 °F to +104 °F (+5 °C to +40 °C).

2. The NSR-500 Series storage temperature shall be within the range of -4 °F to +140 °F (-20 °C to +60 °C).

3. The NSR-500 Series operating humidity shall be within the range of 20 % to 80 % (maximum wet bulb temperature: +86 °F/ +30 °C, non-condensing).

4. The NSR-500 Series storage humidity shall be within the range of 20 % to 90 % (maximum wet bulb temperature: +95 °F/ +35 °C, non-condensing).


I. REGULATORY SPECIFICATIONS:

Safety/EMC - NSR-500 Series

Safety/EMC - NSBK-H05 (optional hard disk drive) series


J. SUPPORTED DEVICES:

1. Sony:Devices indicating with asterisk (*) are available for multiple streams. For the detailed capabilities for multiple streams, refer to each device’s specifications.

a) Video Encoders: SNT-EP104*, SNT-EP154*, SNT-EX101*, SNT-EX101E*, SNT-EX104*, SNT-EX154*, SNT-V704

b) Network Cameras: - 5th Generation Models:

SNC-CH Series; SNC-CH110, SNC-CH120, SNC-CH140*, SNC-CH160, SNC-CH180*, SNC-CH210, SNC-CH220, SNC-CH240*, SNC-CH260, SNC-CH280*

SNC- D H Series; SNC-DH110, SNC-DH110T, SNC-DH120, SNC-DH120T, SNC-DH140*, SNC-DH140T*, SNC-DH160, SNC-DH180*, SNC-DH210, SNC-DH210T, SNC-DH220, SNC-DH220T, SNC-DH240*, SNC-DH240T*, SNC-DH260, SNC-DH280*

SNC- RH/RS Series; SNC-RH124*, SNC-RH164*, SNC-RS44*, SNC-RS46*, SNC-RS84*, SNC-RS86*

- 4th Generation Models:SNC-CM120*, SNC-CS20*, SNC-DM110*, SNC-DM160*, SNC-DS10*, SNC-DS60*

- 3rd Generation Models:SNC-CS50*, SNC-DF50*, SNC-DF80*, SNC-DF85*, SNC-RX530*, SNC-RX550*, SNC-RX570*, SNC-RZ50*

- 2nd Generation Models: SNC-CS10, SNC-CS11, SNC-DF40, SNC-DF70, SNC-P1, SNC-P5, SNC-RZ25

- 1st Generation Models: SNC-CS3, SNC-RZ30, SNC-Z20


2. Axis:

a) Box Type Cameras: AXIS206, AXIS207, AXIS207W, AXIS210, AXIS210A, AXIS211, AXIS211A, AXIS221

b) Mini Dome Cameras: AXIS209FD, AXIS209FD-R, AXIS209MFD, AXIS209MFD-R, AXIS216FD, AXIS216FD-V, AXIS216MFD, AXIS216MFD-V, AXIS225FD, AXISP3301*, AXISP3301-V*(*supported JPEG only)

c) PTZ Cameras: AXIS212PTZ, AXIS213PTZ (with213CM), AXIS214PTZ, AXIS215PTZ

d) Speed Dome Cameras: AXIS232D+, AXIS233D

e) Video Servers: AXIS241Q, AXIS241QA, AXIS243Q, AXISQ7401*, AXISQ7406*, AXIS241S, AXIS243SA, AXIS247S(*supported JPEG only)

3. IQinvision:

a) Box Type Cameras: IQ510, IQ511, IQ702, IQ703, IQ705, IQ711, IQ752, IQ753, IQ755

4. Barix:

a) I/O: Barionet


K. SPECIFICATIONS:

MemoryOnboard flash memory: 512 MBInternal memory: 2 GB

External connectorsFront USB: USB 2.0 (2)

Rear Monitor output: Analog RGB (HD 15-pin VGA) (1)AUDIO OUT (line output): Stereo minijack (1)AUDIO IN (microphone input): Stereo minijack (1)

(used for future expansion)LAN : 1000 Base-T/100Base-TX/10Base-T (RJ-45) (2)USB: USB 2.0 (2)SENSOR IN: compatible with 3.3 V to 24 V DC devices, photo coupler input, insulated from main unit (8)ALARM OUT: maximum 24 V DC, 1 A, mechanical relay output, insulated from main unit (8)UPS (Uninterruptible Power Supply) serial: RS-232C (1)Analog camera control: RS-232C (1), RS-422/485 (1)

PowerPower 100 to 127 V AC/ 200 to 240 V AC (50 / 60 Hz)Power consumption Max 350 W

L. SUPPLIED ACCESSORIES:

1. Front panel key (2)2. Installation Manual (1)3. CD-ROM (User’s Guide) (1)4. WEEE booklet (1)5. EU battery booklet (1)6. Warranty booklet (1)7. Rubber feet (4)8. HDD screws (24)*9. Setup Disc (1)*

*without HDD model (NSR-500: 00) only

M. OPTINONAL ACCESSORIES:

NSBK-CL05 Additional Camera LicenseNSBK-H05:01 Hard Disk Drive (1 TB)NSBK-H05:02 Hard Disk Drive (2 TB)RM-NS1000 System Controller


N. DIMENSIONS:


O. PIN　ASSIGNMENTS:

©2011 Sony Corporation. All rights reserved. Features and specifications are subject to change without notice. Non-metric weights and measurements are approximate. Sony is a registered trademark of Sony Corporation. Microsoft, Windows, Windows XP, Windows Vista, Windows 7 and Internet Explorer are trademarks of Microsoft Corporation. Intel, Pentium, and Core are trademarks of Intel Corporation. All other trademarks are the property of their respective owners.


· web viewthe server shall be capable of locking the monitoring window. the server shall...

Documents