· web viewthen you can plug in the power cable and turn it on. but my machine wouldn’t...
TRANSCRIPT
UNIT 311 Repair And Rebuild
First we put on the lab jacket and the anti-static wrist band, you also ways have to put the anti-static wrist on your right hand with the metal touching your skin
Then we took off the case
This is inside of the PC
UNIT 311 Repair And Rebuild
There is no RAM in the PC
So I got a piece of RAM and put it into the RAM slot
The next problem I seen was that the cable to link the PC and monitor was in
UNIT 311 Repair And Rebuild
This is a circuit breaker it will cut off the power if there is a serge, it is there to protect you from getting electrocuted
You have to press reset
And then test
UNIT 311 Repair And Rebuild
The power cable didn’t have a fuse in it so I put one in
Next I plugged in the keyboard and mouse and then turned the monitor and the computer on
UNIT 311 Repair And Rebuild
Then you can plug in the power cable and turn it on. But my machine wouldn’t turn on
This is windows
Now we shut windows down to take the PC apart
UNIT 311 Repair And Rebuild
Then windows started up
This is me using the screw driver to undo the disk drive
And then I started unplugging the cables in the PC
UNIT 311 Repair And Rebuild
This is a screw driver This is a screw driver
This is the motherboard and the fan which we took out as well
This is all the components part 1
This is all the components part 2
UNIT 311 Repair And Rebuild
Then we had to put the PC back together
Put the case back on and turn the PCon again
And then finally we started windows again
UNIT 311 Repair And Rebuild