vision accendo led catalogue

Tomorrow’s LED Lighting

2013 Catalogue

7 Tubes

Page 8 - 14 Toshiba Lamps

Page 15 - 18 Flat Panels

Page 19 - 21 Emergency Fittings

2 - 32 Exterior Floodlights

Page 33 - 35 Low Bays

Page 36 - 39 High Bays

Page 40 - 44 Street Lights

Page 45 - 50 Downlights

Page 51 Accessories

Contents

ABOUT USVision Accendo specialise in providing highly efficient, low energy and environmentally friendly industrial & commercial LED lighting solutions, that are used by a wide range of private and public enterprises throughout the UK. All Vision Accendo lighting products have been tested and chosen as “best of breed” in their category and comply with European safety and electrical standards.

Our aim is to provide our customers with a “one-stop shop” for all their energy efficient lighting needs. As well as our comprehensive set of service offerings we also provide a complete range of products either on a bespoke basis or if appropriate we can deliver directly from stock. A full list of our products with technical specifications can also be found in our on-line catalogue.

Vision Accendo is a member of the Electrical Contractors Association (ECA) and provides a range of services, including:

• Free lighting design service• Try before you buy• Installation services• Finance options to spread the costs of acquiring our lights or using our services.

Vision Accendo provide industrial LED lighting products and services to a wide range of customers who often have common requirements, such as:

• Reducing their ongoing energy costs• Eliminating the disruption to their working environments caused by unplanned lighting maintenance.• Reducing carbon emissions• Dealing with a company that is expert in their field who they can trust

Vision Accendo want to supply the best possible industrial LED lighting solutions for their customers’ needs combined with outstanding customer service. Vision Accendo believe that it can achieve this level of service by having the Vision Team adopt the following values when working with our customers and business partners:-

• Excellence• Teamwork• Honesty• Openness• Service

Tube Lighting

Our tubes have an aluminium inner pipe “D shaped” patented design and PC outer pipe giving them extra rigidity and improved reliability meeting PC fire rating UL94-V0.

Light transmission is over 85% with almost zero % lumen depreciation after 6,000 hours continuous testing. The SMD LEDs are highly efficient producing over 90 lumens per watt and are built in parallel to enable them to continue functioning if one LED fails.

The driver is designed and manufactured specifically for the “G Vision” Tube with 3pcs IC, meeting both UL and VDE standards. The PCB is designed and processed in house to provide longer lighting life. The power supply comes in a range of 90-277 volts (12-36VDC).

Bi-pin, Single pin or R17D lamp bases are available and the tube can be lit by connecting any two pins at one end resulting in improved safety as recommended in the recent LVD directive* on LED T8 replacement tubes dated Feb 2011. The “G Vision” tube can be retrofitted without the need to remove inductive ballast or starter (Controls are simply bypassed).

The tube comes in a variety of sizes from 0.6m to 2.4 m or can be made to customised lengths in certain circumstances.

Covers can be specified as clear, frosted or stripped, depending on customer requirements.

Five year warranty.

FEATURES

• LED chip with an overall power of 3 watts to 36 watts. • Using SMD LED design. • CE marked and RoHS compliant. • Each tube in region of DCO.5-1.3A• Aluminium backing for improved heat dissipation. • With a combination of its reflector design and no glare or flicker, this light is ideal for use in underground working environments as it causes less eye strain tha conventional lighting sources. • Environmentally friendly as does not contain lead or mercury or any other harmful pollutants. • Working off either direct or low voltage currents, makes this light ideal for use with sustainable energy sources such as solar or wind turbine. • Life expectancy of 50,000 hours: Based on usage of 8 hours per day gives an overall life expectancy of 17 years. • Design and life expectancy results in lower maintenance costs. • Various colours are available including white, red, blue, green or amber

*See LVD discovery on page 7

AVAILABLE SIZES WATTAGE600 2ft 8900 3ft 12 1200 4ft 18

Frosted and clear diffuser

GVision T8 Tube

APPLIED SPECIFICATION & STANDARDSEN55015:2006+A1:2007EN61547:1995+A1:2000+A2:2003DN61000-3-2:2006EN61000-3-3:1995+A1:2001+A2:2005

TECHNICAL SPECIFICATION

Power (W)

Frequency (V)

Operating Voltage (V)

Efficiency Lm/W

Supply efficiency (%)

Power Factor

Colour Render

Kelvin

Amb. Temp (c)

Life Span (hrs)

Ingress Protection (IP)

Weight (Kg)

8-24

50~60Hz

AC200~240

100~110

>0.9%

>0.9

>75

4500-5500

(-)20~50

50000

40

-

Photometrics based on a 4ft tube

IP40

T5 versions also available

5


Power (W)

Frequency (V)


Efficiency Lm/W


Power Factor

Colour Render

Kelvin

Amb. Temp (c)

Life Span (hrs)


Weight (Kg)

20-36

50~60Hz

AC 85-260

100~110

90%

>0.9

>75

2700 - 5500

(-)20 ~ 50

50,000

40

-IP40

Note:We supply LED pre-wired fittings that are available in battens or vapourproof.

APPLIED SPECIFICATION & STANDARDSEN55015:2006+A1:2007EN61547:1995+A1:2000+A2:2003DN61000-3-2:2006EN61000-3-3:1995+A1:2001+A2:2005

GVision T10 Tube

Our tubes have an aluminium inner pipe “D shaped” patented design and PC outer pipe giving them extra rigidity and improved reliability meeting PC fire rating UL94-V0.

Light transmission is over 85% with almost zero % lumen depreciation after 6,000 hours continuous testing. The SMD LEDs are highly efficient producing over 90 lumens per watt and are built in parallel to enable them to continue functioning if one LED fails.

The driver is designed and manufactured specifically for the “G Vision” Tube with 3pcs IC, meeting both UL and VDE standards. The PCB is designed and processed in house to provide longer lighting life. The power supply comes in a range of 90-277 volts (12-36VDC).

Bi-pin, Single pin or R17D lamp bases are available and the tube can be lit by connecting any two pins at one end resulting in improved safety as recommended in the recent LVD directive* on LED T8 replacement tubes dated Feb 2011. The “G Vision” tube can be retrofitted without the need to remove inductive ballast or starter (Controls are simply bypassed).

The tube comes in a variety of sizes from 0.6m to 2.4 m or can be made to customised lengths in certain circumstances.

Covers can be specified as clear, frosted or stripped, depending on customer requirements.

Five year warranty.

FEATURES

• LED chip with an overall power of 3 watts to 36 watts. • Using SMD LED design. • CE marked and RoHS compliant. • Each tube in region of DCO.5-1.3A• Aluminium backing for improved heat dissipation. • With a combination of its reflector design and no glare or flicker, this light is ideal for use in underground working environments as it causes less eye strain than conventional lighting sources. • Environmentally friendly as does not contain lead or mercury or any other harmful pollutants. • Working off either direct or low voltage currents, makes this light ideal for use with sustainable energy sources such as solar or wind turbine. • Life expectancy of 50,000 hours: Based on usage of 8 hours per day gives an overall life expectancy of 17 years. • Design and life expectancy results in lower maintenance costs. • Various colours are available including white, red, blue, green or amber.

*See LVD discovery on page 7

Our unique operating voltage allows our tubes to be used for temporary power on building sites where 110v AC is used.

LVD ADCO Recommendation Adopted: February 2011

Safety of LED T8 replacement tubes and modified luminaires

Recent enforcement actions on the LED T8 replacement tubes by countries in the EEA have revealed that many of these products do not comply with safety requirements, e.g. protection against electric shock. A common failure is access to live parts e.g. with one end of the tube inserted in the luminaire the other end presents an easily accessible electric shock hazard.

As these products are within the scope of the Directive 2006/95/EC (the Low Voltage Directive (LVD)), these concerns were discussed at the LVD ADCO 26th Meeting on 17 &18 Nov 2010, which concluded that generally economic operators (manufacturer, importer, distributor and retailer) are not fully aware of the safety risks relevant to the LED replacement tubes they manufacture, import or supply. It was also recognised that guidance, in the form of an ADCO Recommendation, would be helpful to assist the economic operators in understanding these risks and also the actions required to meet the requirements of the LVD.

Recommendation:

General

It is important that the economic operators fully understand their responsibility with respect to compliance requirements of these products with the LVD and its safety objectives.

• The manufacturers, importer and distributors are responsible for ensuring that only those products that fulfil the LVD safety objectives (i.e. products are safe) are placed on the EEA market.

• The Directive requires that all products placed on the market meet the safety requirements; the conformity assessment demonstrates how these requirements have been met. A manufacturer may use harmonized standards to provide a presumption of conformity with the LVD, however, currently there are no specific standards for these products. Economic operators will need to use other means to assess the safety risks. For example, the standard EN 60598-1:2008, clause 8 could be used to form the basis of assessing risk of access to live parts.

• Thus, the Technical Documentation must contain, among others, an assessment of the risks, a description of the technical solutions adopted, and the procedures used for verification, providing a detailed explanation as to how the safety objectives and requirements of the Directive have been achieved.

Replacement tubes

• Those LED T8 replacement tubes that are intended for use as replacements in standard fluorescent luminaires i.e. where no modification of the original luminaire is required (retrofit type)2 must meet the applicable specifications for a standard fluorescent tube; e.g. must not exceed the dimensions and operating parameters related to the safety of the original fluorescent tube (e.g. weight, power, temperature rise, electrical properties)

• Conformity assessment of the retrofit LED replacement tube and its starter replacement must take any combination of original and replacement components into account.

• LED tubes, which when one end of the tube is inserted into a luminaire expose a hazard caused by direct contact with live parts (e.g. contact pins) at the other end of the tube do not fulfil the safety objectives of the LVD.

Wiring Diagram

LED TUBELabel

LED TUBELabel

LED TUBELabel

LED TUBELabel

End Cap

L E N

N L

LED TUBELabel

LED TUBELabel

LED TUBELabel

L E N

N L

LED TUBELabel

LED TUBELabel

L E N

N L

Quad – Remove all Control Gear

Triple – Remove all Control Gear

Twin – Remove all Control Gear

Single – Remove all Control Gear(Switch start – just remove starter)

LED TUBELabel

L E NL

Wiring Diagram

N

7

Panel Lights

VA - Panel Lights


Power (W)

Frequency (V)


Efficiency Lm/W


Power Factor

Colour Render

Kelvin

Amb. Temp (c)

Life Span (hrs)


Weight (Kg)

20-50

50~60Hz

AC85~265 DC12V/27

90~110

>88%

>0.9

>80

3200 - 5500

(-)40 ~ 40

50,000

20

4.2photometrics taken from 30w panel light

IP20

MATERIALSAluminium frame, backboard, surface support, corner and clip edge, highlight transmission and opaque acrylic diffuser.

APPLICATIONSOffices, show centres, stores and other general lighting or partial lighting, offices, banks, hospitals, courts, resturants, hotels and other public buildings.

FEATURES• Surface light source, comfortable lighting effect without any glare• Consuming less 50% electricity compared with traditional fluorescent tube• Long life span, 50000hours, lumen maintenance rate being 70%, more than 10 years service life for one-step installation.• Colour rendering index, being more than 80, completely satisfies indoor illumination requirement • Instantaneous start-up, it can be frequently switched on and off• Dimmable, different brightness requirements can be met• DC power supply, no flash to better protect eyes• Mercury-free, and no other contaminations contained, more environment friendly

Emergency Pack Available For All Panels

SIZES WATTAGE300 x 600mm 20 / 30W300 x 1200mm 40W600 x 600mm 30 / 50W

VA - Slim Panels


Power (W)

Frequency (V)


Efficiency Lm/W


Power Factor

Colour Render

Kelvin

Amb. Temp (c)

Life Span (hrs)


Weight (Kg)

40-50

50~60Hz

AC100~240

>81

>88%

>0.9

>70/80

2700-6300

(-)0.25

35,000

20

3.8IP20

STRUCTURAL FEATURES• Solid maintenance free, fast start up and long life span.• Using new catoptric system with high lumen output and high uniformity of light.• Housing has high level of shock resistance with im ported hardened alloy. • Matted appearance, compact, slim lightweight design and easy to install.• Choice of cool white and natural white with dimmable option.


APPLICATIONSSpecial constant current design ensures stable, reliable operation and energy savings.Anti-EMI, CE certification passed.Unleaded, environmentally friendly and ROHS approved.

17


Power (W)

Frequency (V)


Efficiency Lm/W


Power Factor

Colour Render

Kelvin

Amb. Temp (c)

Life Span (hrs)


Weight (Kg)

43

50~60Hz

AC85~265DC12V/35

>70

>88%

>0.9

>80

2700-5500

(-)5-50

50,000

20

4.5

IP20

STRUCTURAL FEATURES• Solid maintenance free, fast start up and long life span.• Using new catoptric system with high lumen output and high uniformity of light.• Housing has high level of shock resistance with im ported hardened alloy. • Matted appearance, compact, slim lightweight design and easy to install.• Choice of cool white and natural white with dimmable option.


APPLICATIONSSpecial constant current design ensures stable, reliable operation and energy savings.Anti-EMI, CE certification passed.Unleaded, environmentally friendly and ROHS approved.

GVision Ultra Slim Panels

GVision Round Panel

Complimentary to our ultra slim LED panel light, we introduce our new round flat panel light, as a perfect replacement for a compact fluorescent fitting. Using the same Edge Lit technology and matching colour temperatures, this provides a perfect all encompassing office solution.

Aluminium alloy surround, available in either white or silver to match the 600mm x 600mm panel. Colour temperatures 2700k-6500k. Cut out sizes 160mm (10w 880 Lm), 182mm (12w 990 Lm) and 225mm (18w 1430 Lm).


Power (W)

Frequency (V)


Efficiency Lm/W


Power Factor

Colour Render

Kelvin

Amb. Temp (c)

Life Span (hrs)


Weight (Kg)

18

50~60Hz

AC90 - 240

70

≥0.9

≥75

2700 - 6500

(-)20 - 50

50,000

0.86

Emergency Lighting

VA - Bulk


Power (W)

Frequency (V)


Amb. Temp (c)

IP20

NON-MAINTAINED Lamp normally off and batterγ on automatic charge (LED ‘on’ ) when the A.C. Supply is healthy. Solid state circuitry automatically switches the lamp on when the A.C. supply is interrupted.

MAINTAINED Emergency lamp normally on, when the supply to switched live is on. The battery is on automatic charge (LED ‘on’).Lamp will switch on or remain on if A.C. Supply is interrupted.

MONITORINGGreen indicator lamp (LED) normally continuously ‘on’, indicator lamp goes out if A.C. supply or charger fails.

BATTERYSealed Nickel- Cadmium rechargeable battery pack.

TEMPERATUREPerformance figures measured at 25°

1.5

50~60Hz

AC220 - 240

(-)25

VA - Recessed


Power (W)

Frequency (V)


Amb. Temp (c) IP20

FEATURESGimballed recessed emergency 3w downlighter in brushed aluminium finish. Illuminates green when power is healthy, and emits a powerful focused beam upon power failure to aid exit.

TECHNICALPerformance figures measured at 25° Rated input voltage 220 - 240V 50/60Hz Battery Standard: 3.6V 1.5Ah Ni-Cd Emergency duration 3 Hours

3

50~60Hz

AC220~240

(-)25

21

Exterior Floodlights

VA - 10W Mini Flood Light


Power (W)

Frequency (V)


Efficiency Lm/W


Power Factor

Colour Render

Kelvin

Amb. Temp (c)

Life Span (hrs)


Weight (Kg)

10

50~60Hz

AC85~277

80~90

>80%

>0.95

>70

3200-5000

(-)20~40

35,000

64

-IP64

The light housing is made of high quality alloy aluminium with excellent heat dispersion coated with an acid, alkali and salt erosion resistant paint. The lamp body adopts a tempered glass cover with water tight silicon gasket, proven with 100% successful dip test.

This particular floodlight saves up to 50% energy consumption compared to traditional lighting methods and has a much lower temperature when under working conditions.

Built in constant current LED driver ensures steady function and a long lifespan, of average 30,000 hours of running time, there is no need for repair or maintenance costs.

Applications; wall washing, outdoor advertising, landscape/garden lighting etc.

VA - 30W Flood Light + PIR


Power (W)

Frequency (V)


Efficiency Lm/W


Power Factor

Colour Render

Kelvin

Amb. Temp (c)

Life Span (hrs)


Weight (Kg)IP64

MATERIALSHigh-purity aluminium reflector and heat sink, high intensity tempered glass cover, single powerful LED light source, highly efficient driver.

APPLIED SPECIFICATION & STANDARDSEN 55015: 2000+A2:2002,EN 61547: 1995+A1:2002 EN 61000-3-2:2000, EN 61000-3-3:1995+A1:2001 EN 55015:2000+A2:2002, EN 61547: 1995+A1:2002

FEATURES• Uses one or two powerful LED chips (10-140W) as the light source with proprietary LED encapsulation.• Utilises a multichip single module and high brightness semi-conductor chips.• High heat conductivity, low luminous decay, pure light colour and no ghosting.• The heat from the LED is removed through the heat dissipation wing and also by the air ventilation.• Expected 50,000 hours life-span; based on usage of 8 hours per day gives an overall life expectancy of 17 years.• The long life expectancy and design criteria results in lower maintenance charges.• High integration between the 5mm high intensity tempered glass and the light housing enables the light to be used in high humidity environments.• The lights are sealed by age-resistant silicone rubber. Surfaces are treated with oxidation and plastic spraying.• Light meets the requirement of IP.• Reflector is manufactured using high purity aluminium ensuring a high reflecting efficiency, maximum flux. Reflector designed to provide light uniformity and improved utilization ratios.• Wide options of light colour depending on the requirements in different environments.• Overall design eliminates dullness often found in lower colour temperature such as sodium lights or higher colour temperatures such as mercury lamps.• No UV emitted.• Very easy to install at any angle ensuring minimal light pollution.• Working off various voltages, makes this light ideal for use with sustainable energy sources such as solar or wind turbine

30~50

50~60Hz

AC85~265DC 12-24

80~140

>88%

>0.95

>70

3200-5000

(-)40~55

50,000

65

3.3

VA - 225TG Flood


Power (W)

Frequency (V)


Efficiency Lm/W


Power Factor

Colour Render

Kelvin

Amb. Temp (c)

Life Span (hrs)


Weight (Kg)IP65

10~30

50~60Hz

AC85~265DC 12-24

80~140

>88%

>0.95

>70

3200-5000

(-)40~55

50,000

65

2.3




25


Power (W)

Frequency (V)


Efficiency Lm/W


Power Factor

Colour Render

Kelvin

Amb. Temp (c)

Life Span (hrs)


Weight (Kg)IP65

VA - 290TG Flood

30~50

50~60Hz

AC85~265DC 12-24

80~140

>88%

>0.95

>70

3200-5000

(-)40~55

50,000

65

3.3





Power (W)

Frequency (V)


Efficiency Lm/W


Power Factor

Colour Render

Kelvin

Amb. Temp (c)

Life Span (hrs)


Weight (Kg)IP20

VA - 225TS Flood

10~30

50~60Hz

AC85~265DC 12-24

80~140

>88%

>0.95

>70

3200-5000

(-)40~55

50,000

20

2.3




27


Power (W)

Frequency (V)


Efficiency Lm/W


Power Factor

Colour Render

Kelvin

Amb. Temp (c)

Life Span (hrs)


Weight (Kg)IP65

VA - 370TS Flood

10~70

50~60Hz

AC85~265DC 12-24

80~140

>88%

>0.95

>70

3200-5000

(-)40~55

50,000

65

7.8



FEATURES• Uses one or two powerful LED chips (10-140W) as the light source with proprietary LED encapsulation.• Utilises a multichip single module and high brightness semi-conductor chips.• High heat conductivity, low luminous decay, pure light colour and no ghosting.• The heat from the LED is removed through the heat dissipation wing and also by the air ventilation.• Expected 50,000 hours life-span; based on usage of 8 hours per day gives an overall life expectancy of 17 years.• The long life expectancy and design criteria results in lower maintenance charges.• High integration between the 5mm high intensity tempered glass and the light housing enables the light to be used in high humidity environments.• The lights are sealed by age-resistant silicone rubber. Surfaces are treated with oxidation and plastic spraying.• Light meets the requirement of IP.• Reflector is manufactured using high purity aluminium ensuring a high reflecting efficiency, maximum flux. Reflector designed to provide light uniformity and improved utilization ratios.• Wide options of light colour depending on the requirements in different environments.• Overall design eliminates dullness often found in lower colour temperature such as sodium lights or higher colour tem peratures such as mercury lamps.• No UV emitted.• Very easy to install at any angle ensuring minimal light pollution.• Working off various voltages, makes this light ideal for use with sustainable energy sources such as solar or wind turbine.


Power (W)

Frequency (V)


Efficiency Lm/W


Power Factor

Colour Render

Kelvin

Amb. Temp (c)

Life Span (hrs)


Weight (Kg)IP65

VA - 570TS Flood

80~140

50~60Hz

AC85~265DC 12-24

80~140

>88%

>0.95

>70

3200-5000

(-)40~55

50,000

65

11.2



FEATURES• Uses one or two powerful LED chips (10-140W) as the light source with proprietary LED encapsulation.• Utilises a multichip single module and high brightness semi-conductor chips.• High heat conductivity, low luminous decay, pure light colour and no ghosting.• The heat from the LED is removed through the heat dissipation wing and also by the air ventilation.• Expected 50,000 hours life-span; based on usage of 8 hours per day gives an overall life expectancy of 17 years.• The long life expectancy and design criteria results in lower maintenance charges.• High integration between the 5mm high intensity tempered glass and the light housing enables the light to be used in high humidity environments.• The lights are sealed by age-resistant silicone rubber. Surfaces are treated with oxidation and plastic spraying.• Light meets the requirement of IP.• Reflector is manufactured using high purity aluminium ensuring a high reflecting efficiency, maximum flux. Reflector designed to provide light uniformity and improved utilization ratios.• Wide options of light colour depending on the requirements in different environments.• Overall design eliminates dullness often found in lower colour temperature such as sodium lights or higher colour temperatures such as mercury lamps.• No UV emitted.• Very easy to install at any angle ensuring minimal light pollution.• Working off various voltages, makes this light ideal for use with sustainable energy sources such as solar or wind turbine.

29


Power (W)

Frequency (V)


Efficiency Lm/W


Power Factor

Colour Render

Kelvin

Amb. Temp (c)

Life Span (hrs)


Weight (Kg)IP65

VA - 260FG Flood

10~40

50~60Hz

AC85~265DC 12-24

80~140

>88%

>0.95

>70

3200-5000

(-)40~55

50,000

65

3.3


APPLIED SPECIFICATION & STANDARDSEN 55015: 2000+A2:2002,EN 61547: 1995+A1:2002EN 61000-3-2:2000, EN 61000-3-3: 1995+A1:2001EN 55015:2000+A2:2002, EN 61547: 1995+A1:2002

FEATURES• Uses one or two powerful LED chips (10-140W) as the light source with proprietary LED encapsulation.• Utilises a multichip single module and high brightness semi-conductor chips.• High heat conductivity, low luminous decay, pure light colour and no ghosting.• The heat from the LED is removed through the heat dissipation wing and also by the air ventilation.• Expected 50,000 hours life-span; based on usage of 8 hours per day gives an overall life expectancy of 17 years.• The long life expectancy and design criteria results in lower maintenance charges.• High integration between the 5mm high intensity tempered glass and the light housing enables the light to be used in high humidity environments.• The lights are sealed by age-resistant silicone rubber. Surfaces are treated with oxidation and plastic spraying.• Light meets the requirement of IP.• Reflector is manufactured using high purity aluminium ensuring a high reflecting efficiency, maximum flux. Reflector designed to provide light uniformity and improved utilization ratios.• Wide options of light colour depending on the requirements in different environments.• Overall design eliminates dullness often found in lower colour temperature such as sodium lights or higher colour tem peratures such as mercury lamps.• No UV emitted.• Very easy to install at any angle ensuring minimal light pollution.• Working off various voltages, makes this light ideal for use with sustainable energy sources such as solar or wind turbine


Power (W)

Frequency (V)


Efficiency Lm/W


Power Factor

Colour Render

Kelvin

Amb. Temp (c)

Life Span (hrs)


Weight (Kg)IP65

VA - 370FG Flood

10~70

50~60Hz

AC85~265DC 12-24

80~140

>88%

>0.95

>70

3200-5000

(-)40~55

50,000

65

7.8



FEATURES• Uses one or two powerful LED chips (10-140W) as the light source with proprietary LED encapsulation.• Utilises a multichip single module and high brightness semi-conductor chips.• High heat conductivity, low luminous decay, pure light colour and no ghosting.• The heat from the LED is removed through the heat dissipation wing and also by the air ventilation.• Expected 50,000 hours life-span; based on usage of 8 hours per day gives an overall life expectancy of 17 years.• The long life expectancy and design criteria results in lower maintenance charges.• High integration between the 5mm high intensity tempered glass and the light housing enables the light to be used in high humidity environments.• The lights are sealed by age-resistant silicone rubber. Surfaces are treated with oxidation and plastic spraying.• Light meets the requirement of IP.• Reflector is manufactured using high purity aluminium ensuring a high reflecting efficiency, maximum flux. Reflector designed to provide light uniformity and improved utilization ratios.• Wide options of light colour depending on the requirements in different environments.• Overall design eliminates dullness often found in lower colour temperature such as sodium lights or higher colour tem peratures such as mercury lamps.• No UV emitted.• Very easy to install at any angle ensuring minimal light pollution.• Working off various voltages, makes this light ideal for use with sustainable energy sources such as solar or wind turbine.

31


Power (W)

Frequency (V)


Efficiency Lm/W


Power Factor

Colour Render

Kelvin

Amb. Temp (c)

Life Span (hrs)


Weight (Kg)IP65

VA - 570FG Flood

80~140

50~60Hz

AC85~265DC 12-24

80~140

>88%

>0.95

>70

3200-5000

(-)40~55

50,000

65

11.2



FEATURES• Uses one or two powerful LED chips (10-140W) as the light source with proprietary LED encapsulation.• Utilises a multichip single module and high brightness semi-conductor chips.• High heat conductivity, low luminous decay, pure light colour and no ghosting.• The heat from the LED is removed through the heat dissipation wing and also by the air ventilation.• Expected 50,000 hours life-span; based on usage of 8 hours per day gives an overall life expectancy of 17 years.• The long life expectancy and design criteria results in lower maintenance charges.• High integration between the 5mm high intensity tempered glass and the light housing enables the light to be used in high humidity environments.• The lights are sealed by age-resistant silicone rubber. Surfaces are treated with oxidation and plastic spraying.• Light meets the requirement of IP.• Reflector is manufactured using high purity aluminium ensuring a high reflecting efficiency, maximum flux. Reflector designed to provide light uniformity and improved utilization ratios.• Wide options of light colour depending on the requirements in different environments.• Overall design eliminates dullness often found in lower colour temperature such as sodium lights or higher colour temperatures such as mercury lamps.• No UV emitted.• Very easy to install at any angle ensuring minimal light pollution.• Working off various voltages, makes this light ideal for use with sustainable energy sources such as solar or wind turbine.

Low Bays

VA - 370SD


Power (W)

Frequency (V)


Efficiency Lm/W


Power Factor

Colour Render

Kelvin

Amb. Temp (c)

Life Span (hrs)


Weight (Kg)

10~70

50~60Hz

AC85-265 DC12V/24

80~140

>88%

>0.95

>70

3200 - 5000

(-)40 - 55

50,000

65

7.8IP65

MATERIALSHigh-purity aluminium reflector, light housing and heat sink, 5mm thick high intensity clear or frosted glass, single powerful LED light source, highly efficient driver.


FEATURES• Uses one or two powerful LED Chips (10W - 140W) as the light source with proprietary LED encapsulation.• Utilises a multichip single module and high brightness semi-conductor chips.• High heat conductivity, low luminous decay, pure light colour and no ghosting.• The heat from the LED is removed through the heat dissipation wing and also by the air ventilation.• Expected 50,000 hours life-span; based on usage of 8 hours per day gives an overall life expectancy of 17 years.• The long life expectancy and design criteria results in lower maintenance charges.• High integration between the 5mm high intensity tempered glass/frosted and the light housing enables the light to be used in high humidity environments.• Surfaces are treated with oxidation and plastic spraying.• The light meets the IP requirements.• Reflector is manufactured using high purity aluminium ensuring a high reflecting efficiency giving maximum flux.• Reflector designed to provide light uniformity and improved utilization ratios.• Wide options of light colour depending on the requirements in different environments.• Overall design eliminates dullness often found in lower colour temperature such as sodium lights or higher colour temperatures such as mercury lamps.• Environmentally friendly as does not contain lead or mercury or any other harmful pollutants. No UV.• Very easy to install at any angle ensuring minimal light pollution.• Working off either direct or low voltage current makes the flood light ideal for use with sustainable energy sources such as solar.

VA - 570SD


Power (W)

Frequency (V)


Efficiency Lm/W


Power Factor

Colour Render

Kelvin

Amb. Temp (c)

Life Span (hrs)


Weight (Kg)

80~140

50~60Hz

AC85-265 DC12V/24

80~140

>88%

>0.95

>70

3200 - 5000

(-)40 - 55

50,000

65

11.2IP65

MATERIALSHigh-purity aluminium reflector, light housing and heat sink, 5mm thick high intensity clear or frosted glass, single powerful LED light source, highly efficient driver.


FEATURES• Uses one or two powerful LED Chips (10W - 140W) as the light source with proprietary LED encapsulation.• Utilises a multichip single module and high brightness semi-conductor chips.• High heat conductivity, low luminous decay, pure light colour and no ghosting.• The heat from the LED is removed through the heat dissipation wing and also by the air ventilation.• Expected 50,000 hours life-span; based on usage of 8 hours per day gives an overall life expectancy of 17 years.• The long life expectancy and design criteria results in lower maintenance charges.• High integration between the 5mm high intensity tempered glass/frosted and the light housing enables the light to be used in high humidity environments.• Surfaces are treated with oxidation and plastic spraying.• The light meets the IP requirements.• Reflector is manufactured using high purity aluminium ensuring a high reflecting efficiency giving maximum flux.• Reflector designed to provide light uniformity and improved utilization ratios.• Wide options of light colour depending on the requirements in different environments.• Overall design eliminates dullness often found in lower colour temperature such as sodium lights or higher colour temperatures such as mercury lamps.• Environmentally friendly as does not contain lead or mercury or any other harmful pollutants. No UV.• Very easy to install at any angle ensuring minimal light pollution.• Working off either direct or low voltage current makes the flood light ideal for use with sustainable energy sources such as solar.

35

High Bays

MATERIALSAnodized aluminium tensile reflector, patented heat body design, acrylic sealing cover, single powered LED, high ef-ficiency driver.

APPLIED SPECIFICATION & STANDARDSEN 55015:2006+A1:2007,EN 61547:1995+A1:2000 EN 61000-3-2:2006,EN 61000-3-3:2008

FEATURES• Single powerful LED (10-100W) as the light source with proprietary LED encapsulation.• Utilises a multichip single module and high brightness semi- conductor chips.• Is characterised by high heat conductivity, low luminous decay, pure light colour and no ghosting.• Heat sink design gives highly effective cooling.• No start delay and reaches its normal light as soon as it is turned on.• Light meets the requirement of IP.• Unit is designed to ensure dust prevention.• Water proofing ensures the unit is rust resistant.• Environmentally friendly as does not contain lead or mercury or any other harmful pollutants.• The surface of the heat sink has been covered with anodic oxidation and is a highly compact structure.• Life expectancy of 50,000 hours: Based on usage of 8 hours per day gives an overall life expectancy of 17 years.• Design and life expectancy results in lower maintenance costs.• Highly energy efficient using 60 - 70% less power than traditional sodium light equivalent.

Industrial & Retail High Bays


Power (W)

Frequency (V)


Efficiency Lm/W


Power Factor

Colour Render

Kelvin

Amb. Temp (c)

Life Span (hrs)


Weight (Kg)

40~100

50~60Hz

AC85-265 / DC12-24

80~110

>90%

>0.98

>70

3200 - 5000

(-)40 - 55

50,000

65

6.5IP65

37


Power (W)

Frequency (V)


Efficiency Lm/W


Power Factor

Colour Render

Kelvin

Amb. Temp (c)

Life Span (hrs)


Weight (Kg)

30~300

50~60Hz

AC100-277

65~80

>0.95

>75

3200 - 5000

(-)40 - 55

30,000

65

-IP65

The light housing is made of high quality alloy aluminium with excellent heat dispersion, anodised with an acid, alkali and salt erosion resistant coating.

This high bay saves up to 50% energy consumption compared to traditional lighting methods and has a much lower temperature when under working conditions, which may lead to a reduction in air conditioning/extraction costs.

Built in constant current LED driver ensures steady function and a long lifespan, of average 30,000 hours of running time, there is no need for repair or maintenance costs.

APPLICATIONSWarehousing, manufacturing shop, stations or supermarket lighting etc.

30w to 300w Highbay

VA - 460 Aluminium Reflector

IP65

VA - 520 Aluminium Reflector

Polycarbonate Reflector

39

Street Lights

VA - 500 Street Light


Power (W)

Frequency (V)


Efficiency Lm/W


Power Factor

Colour Render

Kelvin

Amb. Temp (c)

Life Span (hrs)


Weight (Kg)IP20

40

50~60Hz

AC85-265 / DC12-24

80~140

>88%

>0.9

>70

3200 - 5000

(-)40 - 55

50,000

65

4

MATERIALSA high purity aluminium reflector, housing and heat sink, high strength tempered glass cover, single powerful LED light source, highly efficient driver.

APPLIED SPECIFICATION & STANDARDSEN 60598-1:2004,EN60898-2-3:2003

FEATURES• Uses single powerful LED (30-100W) as the light source with proprietary LED encapsulation.• Utilises a multichip single module.• Integrated design for heat sink and housing.• The heat from the LED is removed through the heat dissipation wing and also by the air ventilation.• Expected 50,000 hours life-span; based on usage of 8 hours per day gives an overall life expectancy of 17 years.• The long life expectancy and design criteria results in lower maintenance charges.• The die-casting aluminium alloy housing is highly effective in waterproofing and dust prevention.• The surface of the light is treated to enable it to withstand sun light and is resistant to corrosion.• The light meets the IP standard.• A monomer ellipse reflector with spheroid cambered surface controls the LED light to improve uniformity of the light resulting in minimal “light pollution”.• Highly energy efficient, using up to 60 - 70% less power than equivalent traditional sodium lights.• No start delay and reaches its normal light level, as soon as it is turned on.• Clear light output makes this product ideal for use in areas where CCTV is installed.• Environment friendly as does not contain any pollutants.• Working off various voltages, makes this light ideal for use with sustainable energy sources such as solar or wind turbine.

41



Power (W)

Frequency (V)


Efficiency Lm/W


Power Factor

Colour Render

Kelvin

Amb. Temp (c)

Life Span (hrs)


Weight (Kg)

30~100

50~60Hz

AC85-265 / DC12-24

80~110

>90%

>0.98

>70

3200 - 5000

(-)40 - 55

50,000

65

9.56IP65






Power (W)

Frequency (V)


Efficiency Lm/W


Power Factor

Colour Render

Kelvin

Amb. Temp (c)

Life Span (hrs)


Weight (Kg)

30

50~60Hz

AC85-265 / DC12-24

80~110

>90%

>0.98

>70

3200 - 5000

(-)40 - 40

50,000

65

4IP65




43



Power (W)

Frequency (V)


Efficiency Lm/W


Power Factor

Colour Render

Kelvin

Amb. Temp (c)

Life Span (hrs)


Weight (Kg)

40

50~60Hz

AC85-265 / DC12-24

80~110

>90%

>0.98

>70

3200 - 5000

(-)40 - 55

50,000

65

6.5IP65




Downlights


Power (W)

Frequency (V)


Efficiency Lm/W

Colour Render

Kelvin

Amb. Temp (c)

Life Span (hrs)

17 - 40

50~60Hz

100 - 240

65 - 80

85

2700 - 4000

(-)20 - 50

50,000IP20

GVision Recessed

High power LED downlight consisting of one Fortimo SLM module in 3000K and 4000K. All colour temperatures have a high colour rendering index (CRI of 82) and high lumen output of 3000lm. Active heatsink provides effective thermal management. Brushed aluminium finish.

• Elegant appearance, slim & light weight.

• Easy to install, perfect substitute for traditional downlight.

• Edge-lit technology, even & uniform, no dazzle.

• Uses a high-strength die cast aluminium shell-giving good heat dissipation.

Available in two cut out sizes, 115mm and 145mm.

GVision Recessed

GVision 7w LED COB anti-glare downlights provide a uniform illumination and low maintenance solution for replacing conventional halogen downlights. Suitable for a wide range of applications such as domestic, conference/meeting rooms, classrooms, commercial premises, hospitals, hotels and retail outlets. Cut out size 65mm, a direct retro fit for most MR16/GU10 fittings.

Aluminium construction ensures good heat dissipation. Available in a white surround with a black gimballed centre, or a fixed fitting all in white.


Power (W)

Frequency (V)



Power Factor

Colour Render

Kelvin

Life Span (hrs)

Weight (g)

7

50~60Hz

AC90-250

>92%

>0.98

>70

3000 - 4000& 6000

30,000

260

47

GVision Recessed


Power (W)

Frequency (V)


Efficiency Lm/W


Power Factor

Colour Render

Kelvin

Amb. Temp (c)

Life Span (hrs)


Weight (Kg)IP20

GVision 4w LED COB anti-glare downlights provide a uniform illumination and low maintenance solution for replacing conventional halogen downlights. Suitable for a wide range of applications such as domestic, conference/meeting rooms, classrooms, commercial premises, hospitals, hotels and retail outlets. Cut out size 65mm, a direct retro fit for most MR16/GU10 fittings.

Aluminium construction ensures good heat dissipation. Available in a white surround with a black gimballed centre, or a fixed fitting all in white.

4

50~60Hz

100-240

55~65

>92%

>0.9

>70

3000 - 6000

(-)20 - 50

50,000

20

0.2

VA - TD130


Power (W)

Frequency (V)


Efficiency Lm/W


Power Factor

Colour Render

Kelvin

Amb. Temp (c)

Life Span (hrs)


Weight (Kg)

10~40

50~60Hz

AC85-265 / DC12-24

90~110

>86%

>0.9

>80

2700 - 5000

(-)40 - 40

50,000

20

IP20

MATERIALSHigh purity aluminium reflector and heat body; Single high powerful LED light source; High efficiency imported LED driver.

APPLICATIONEntrances, show centres, stores and other general lighting or partial lighting; Markets, banks, hospitals, restaurants, hotels and other public lighting.

VA - TD150

VA - TD180

49


Power (W)

Frequency (V)


Efficiency Lm/W


Power Factor

Colour Render

Kelvin

Amb. Temp (c)

Life Span (hrs)


Weight (Kg)

10~40

50~60Hz

AC85-265 / DC12-24

90~110

>88%

>0.9

>80

2700 - 5000

(-)40 - 40

50,000

20

IP20

MATERIALSHigh purity aluminium reflector and heat body; Single high powerful LED light source; High efficiency imported LED driver.

APPLICATIONEntrances, show centres, stores and other general lighting or partial lighting; Markets, banks, hospitals, restaurants, hotels and other public lighting.

VA - TD240

Accessories Available:

Tunnel Mount, Horizontal or Vertical Mount Brackets for Floods and Low Bays

Street Light Poles

LED Drivers

PIR Controls

Microwave Controls

Photocells

Some of our clients include:

Vision House, Unit 6, Woodside Road, Boyatt Wood, Eastleigh, SO50 4ETt: 0845 519 0203 f: 02380 051213 e: [email protected]

www.visionaccendo.com

vision accendo led catalogue

Documents

g vision tube

range of services

vision team

free lighting design

wide range of customers

led fails

complete range of products

unplanned lighting maintenance