vista security screen slimline sliding door · all vista security screen slimline sliding doors are...
TRANSCRIPT
INSTALLATION INSTRUCTIONS
VISTA SECURITY SCREEN SLIMLINE SLIDING DOOR
Phone: (310) 886-1756 Office • Fax: (310) 327-1180vistasecurityscreens.com
VSS0280
Weather Brush
GDP3_ GDP4_
Premium Hinged Screen Door - 4 Sided Frame Premium Hinged Screen Door - 3 Sided Frame
LHR RHR
Left Hand
LHR
Left Hand Right Hand
RHR
Right Hand
Door Handles andFasteners
Door Handles andFasteners
THBTX092001/4” Hex T20 Torx®
Insert Bit - 2” Long
THBTX09300#9 x 2” (51 mm) T20 Bronze Star
Trim Head Star Drive Screws#9 x 3” (76 mm) T20 Bronze Star
Trim Head Star Drive Screws#9 x 5” (127 mm) T20 Bronze Star
Trim Head Star Drive Screws
THBTX09500150T20A
VISTA SECURITY SCREEN SLIMLINE SLIDING DOOR
ALUMINUM2crlaurence.com | usalum.com 2vistasecurityscreens.com
MODEL IDENTIFICATION
Sliding Glass DoorFixed Glass Door
Inside Mount
Surface Mount
Top View Interior
Top View Interior
Exterior
Exterior
Slimline Screen DoorSlimline Screen Door
Sliding Glass DoorFixed Glass Door
Slimline Screen DoorSlimline Screen Door
THBTX092001/4” Hex T20 Torx®
Insert Bit - 2” Long
THBTX09300#9 x 2” (51 mm) T20 Bronze Star
Trim Head Star Drive Screws#9 x 3” (76 mm) T20 Bronze Star
Trim Head Star Drive Screws#9 x 5” (127 mm) T20 Bronze Star
Trim Head Star Drive Screws
THBTX09500150T20A
VISTA SECURITY SCREEN SLIMLINE SLIDING DOOR
ALUMINUM3crlaurence.com | usalum.com 3vistasecurityscreens.com
INTRODUCTIONAll Vista Security Screen Slimline Sliding Doors are fabricated specifically for each order and shipped fully assembled with the screen doors inside the frame. The mounting option, inside or surface mount, along with the door and track configuration, is determined at time of initial order.The frame is installed with the doors inside. This manual includes instructions for both inside mount and surface mount. Carefully follow the procedures specific to your installation.Larger units may be shipped in two sections. Refer to Oversized Frame Installation for splicing information. When a single door on a single track is installed the screen door is attached to the fixed glass door to prevent the screen door from being removed from the exterior. See Single Door Installation for additional instructions.
RECOMMENDED FASTENERST20 Bronze Star Exterior Coated Screws are recommended for all Vista Security Screen installations.
NOTE: Model GD22_ Slimline Double Sliding Screen on Double Track shown in installation examples.
1 Remove Screen Doors from frame and put aside. Remove Bottom Tracks.2
VISTA SECURITY SCREEN SLIMLINE SLIDING DOOR
ALUMINUM4crlaurence.com | usalum.com 4vistasecurityscreens.com
INSIDE MOUNT PREPARATION
ORDER OF ASSEMBLY AND INSTALLATIONModel Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Recommended Fasteners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Inside Mount Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Inside Mount Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 6Surface Mount Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Finishing Angle Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Oversized Frame Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
IMPORTANT: READ THIS MANUAL THOROUGHLY BEFORE BEGINNING INSTALLATION
1
3
Drill 3/8” (10 mm) clearance hole through first web, and 3/16” (5 mm) hole through second web. Position screws at an angle towards inside into wood stud.
Slimline Frame
Fixed Glass Door
Stucco
WoodStud
2
Center frame in opening. Square and plumb.
Drill holes and insert screws 3” (76 mm) from corners and 10” to 12” (254 to 305 mm) apart at sides of frame.
SH
IM
SHIM
SHIM SHIM SHIM
SHIMSHIM
SH
IM
SH
IM
SH
IM
SH
IM
SH
IM
SH
IM
SH
IM
3”(76 mm)
10” - 12”(254 - 305 mm)
SH
IM
SHIM
SHIM SHIM SHIM
SHIMSHIM
SH
IM
SH
IM
SH
IM
SH
IM
SH
IM
SH
IM
SH
IM
3” (76 mm)
10” - 12”(254 - 305 mm)
Drill 3/16” (5 mm) holes and insert screws in top and bottom frame. Stagger screws and anchors appropriate to substrate.
Slimline Frame
Stagger screws in frame.
Slimline Frame
Sliding G
lass Door
Fixed Glass D
oor
Finished Floor
Finished Ceiling
VISTA SECURITY SCREEN SLIMLINE SLIDING DOOR
ALUMINUM5crlaurence.com | usalum.com 5vistasecurityscreens.com
INSIDE MOUNT INSTALLATION
8 9
Lift and lower first door onto Bottom Track.
Place longer Top Track into frame above door. Slide to end and snap into place.
Move door to install shorter Top Track.
Repeat Steps 6-7 to install second door with longer track on opposite end. Check door operation.
Snap Screw Covers into sides of frame.NOTE: Screw Covers are shipped loose. Trim to fit and snap into place.
7
Snap Bottom Track into each channel of bottom frame.
NOTE: Bottom Tracks run length of frame.
6
4 5S
HIM
SHIM
SHIM SHIM SHIM
SHIMSHIM
SH
IM
SH
IM
SH
IM
SH
IM
SH
IM
SH
IM
SH
IM
SH
IM
SHIM
SHIM SHIM SHIM
SHIMSHIM
SH
IM
SH
IM
SH
IM
SH
IM
SH
IM
SH
IM
SH
IM
SH
IM
SHIM
SHIM SHIM SHIM
SHIMSHIM
SH
IM
SH
IM
SH
IM
SH
IM
SH
IM
SH
IM
SH
IM
NOTE: Each Top Track is split into two uneven pieces.
VISTA SECURITY SCREEN SLIMLINE SLIDING DOOR
ALUMINUM6crlaurence.com | usalum.com 6vistasecurityscreens.com
INSIDE MOUNT INSTALLATION (CONTINUED)
64
1 2 3
Drill pilot holes and insert screws at bottom corners.
5
Drill pilot holes and insert screws at top corners.
Make sure screen doors open smoothly.
Check door operation.Remove temporary shim.
Temporarily shim at bottom to maintain gap.
Shim
Stucco
Stucco
Sliding G
lass Door
Fixed Glass D
oor
Slimline Frame
Slimline Frame
WoodStud
WoodStud
Center frame with screen doors over opening. Square and plumb.
SHIM
SHIM
SHIM
Space remaining screws 10” to 12” (254 to 305 mm) apart and 3” (76 mm) from corners.
NOTE: Space screws 3” (76 mm) from corners.
Repeat with Horizontal Face Caps.
8
8
9
9
7
10” - 12”(254 - 305 mm)
3” (76 mm)
Tap Vertical Face Cap with rubber mallet and wood block to install. Begin at top corners and work down.
VISTA SECURITY SCREEN SLIMLINE SLIDING DOOR
ALUMINUM7crlaurence.com | usalum.com 7vistasecurityscreens.com
SURFACE MOUNT INSTALLATION
4
1
2 3 Cut Finishing Angle to that length and drill pilot holes every 10” to 12” (254 to 305 mm) and 6” (152 mm) from each end.
Center Finishing Angle on fixed glass door stile and match drill pilot holes. Do not drill through glass.
Install Finishing Angle and check to make surescreen door interlocks in the closed position.
NOTE: Surface Mount Single Sliding Door Installations often require a longer Finishing Angle. Follow the procedureabove to install.
Sliding Glass Door
Included Screw Fixed Glass Door
SlimlineScreen Door
Sliding Glass Door
Fixed Glass Door
SlimlineScreen Door
LongerFinishing Angle
Sliding Glass Door
Fixed Glass Door
Do Not drill through glass
Finishing Angle
Slimline Screen Door
Fixed GlassDoor Stile
Minus 1/4” (6 mm)
Fixed GlassDoor Stile
Minus 1/4” (6 mm)
6”(152 mm)
6”(152 mm)
10” - 12”(254 - 305 mm)
Follow instructions on Pages 4 - 7 to install frame with screen door.
5
Measure height of Fixed Glass Door between tracks and deduct 1/4” (6 mm).
VISTA SECURITY SCREEN SLIMLINE SLIDING DOOR
ALUMINUM8crlaurence.com | usalum.com 8vistasecurityscreens.com
FINISHING ANGLE INSTALLATION (REQUIRED FOR ALL SINGLE DOORS)
4
1 2
3
Fit Slimline screen doors together.
Slide halves of frame together making sure Roller Tracks fit into top and bottom frame. Match holes in Roller Tracks with holes in frame and secure with included screws.
Follow instructions on Pages 4 - 7 to install assembled frame with screen doors.NOTE: Models GD22_ Slimline Double Sliding Screen on Double Track Inside Mount shown.
Align Roller Tracks with Rollers at top and bottom of screen doors.
Roller Track
Roller
Roller Track
Roller
Roller TrackSlides into Channel in Frame.
Roller TrackSlides into Channel in Frame.
Interlock
Top View Interior
FinishingAngle
Slimline Frame Slimline Frame
Top View Interior
Slimline
Screen Door
Roller Tracks
Slimline Frame
Slimline Frame
Roller Tracks
Slimline
Screen Door
Slimline
Screen Door
Roller Tracks
Roller Tracks
Slimline
Screen Door
VISTA SECURITY SCREEN SLIMLINE SLIDING DOOR
ALUMINUM9crlaurence.com | usalum.com 9vistasecurityscreens.com
OVERSIZED FRAME INSTALLATION