vivlia antallaktikwn 4.6120-6920 serie

6020 Series TractorsATTACHMENTS

Issue 03/2008 EAME

John Deere Werke Mannheim

Issue 03-2008 (EAME) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-1

ATTACHMENTS - FACTORY AND FIELD INSTALLEDA short description and recommendation of some ofthe various factory and field installations is given.Please note that the information, codes bundlenumbers are given for reference only, the currentprice list must be the only official orderingdocument.

Where factory installation codes or field installationbundle numbers were not available, they will be madeavailable as soon as possible.

1 Drive System

1.1 CREEPER KITS

Models: without cab: 6020 - 6620, low profile open station: 6020 - 6420 6020SE - 6620SE

Note:Depending on the options of the tractor, additional spare parts may be required, e.g. panel. Please use the corresponding spare parts catalog.

Code Bundle Description

AL162433 Creeper kit, PowrQuad transmission,4 ranges

Bundle Description Remark QTY

AL173947 Push-pull cable, 1050 mm length for 4 cyl. tractors 1

AL151613 Clutch cable with absorber for 4 cyl. tractors 1

AL173948 Push-pull cable,1160 mm length for 6 cyl. tractors 1


AL155072 Oil line 1R119441 Arm, clutch outer 1R150858 Bracket, clutch 1

AL174966 Loadcenter bracket

for open operator’s station tractors 1

L171602 Spacer for open operator’s station tractors 2

L79408 Spring clip 1

AL165238 Kit of spare parts for intake lines

for tractors up to serial number 392088 1

B15646 O-ring 2L155450 Clamp 2

L155471 Slotted disk 2

AL117414 U-joint, drive shaft

for 4 cyl. tractorsup to serial number 487435;

for 6 cyl. tractors up to serial number 487435 with disk brake housing with 47 mm (1.85 in.) in length

1


for 4 cyl. tractorsfrom serial number 487436;

for 6 cyl. tractors from serial number 487436 with disk brake housing with 47 mm (1.85 in.) in length

1



1

AL167208 U-joint, drive shaftfor 6 cyl. tractors from serial number 496375 with disk brake housing with 30 mm (1.18 in.) in length

1


6020 Series Tractors-2 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 03-2008 (EAME)

Models: cab only: 6320 - 6420SNote:up to tractor serial number 376372Note:Depending on the options of the tractor,

additional spare parts may be required, e.g. panel. Please use the corresponding spare parts catalog.

Models: cab only: 6320 - 6420SNote: from tractor serial number 376373Note:Depending on the options of the tractor,


Models: cab only: 6120 - 6620Note: up to tractor serial number 376372Note: Depending on the options of the tractor,


Models: cab only: 6120 - 6620Note: from tractor serial number 376373Note: Depending on the options of the tractor,



AL157233 Creeper kit, PowrQuad transmission, 6 ranges


AL173947 Push-pull cable, 1050 mm length not for HCS 1

AL173948 Push-pull cable, 1160 mm length with HCS 1


AL162172Creeper kit, PowrQuad Plus or AutoQuad transmission, 6 ranges

Bundle Description Remark QTYAL160792 Housing 1

AL173947 Push-pull cable, 1050 mm length not for HCS 1

AL173948 Push-pull cable, 1160 mm length with HCS 1


AL157055 Creeper kit, PowrQuad Plus or AutoQuad transmission, 6 ranges


AL173947 Push-pull cable, 1050 mm length 6120 - 6420S 1

AL173948 Push-pull cable, 1160 mm length

6120 - 6420S with HCS,6520, 6620 1


AL162171 Creeper kit, PowrQuad Plus or AutoQuad transmission, 6 ranges

Bundle Description Remark QTYAL160792 Housing 1

AL173947 Push-pull cable, 1050 mm length 6120 - 6420S 1

AL173948 Push-pull cable, 1160 mm length

6120 - 6420S with HCS,6520, 6620 1


Models: without cab: 6020 - 6620, low profile open station: 6020 - 6420, 6020SE - 6620SE


Models: without cab: 6020 - 6620, 6020SE - 6620SE (not for low profile)



AL162432 Creeper kit, SyncroPlus transmission, 4 ranges






AL117412 U-joint, drive shaftfor 4 cyl. tractorsup to serial number 487412

1

AL168625 U-joint, drive shaftfor 4 cyl. tractorsfrom serial number 487413

1

AL117420 U-joint, drive shaftfor 6 cyl. tractorsup to serial number 487394

1

AL168631 U-joint, drive shaftfor 6 cyl. tractorsfrom serial number 487395

1


for tractors up to serial number 392660

1

AL154623 Formed hose, assy. up to serial number 345650 1

AL154624 Formed hose, assy. up to serial number 345650 1

19M7662 M10 x 30 cap screw 1


AL162434 Creeper kit, SyncroPlus transmission with PowrReverser, 4 ranges


AL173947 Push-Pull cable, 1050 mm length for 4 cyl. tractors 1


AL173948 Push-Pull cable, 1160 mm length for 6 cyl. tractors 1


AL174966 Loadcenter bracket

for open operator’s station tractors 1

L171602 Spacer for open operator’s station tractors 2


for 4 cyl. tractorsup to serial number 487435;


1


for 4 cyl. tractorsfrom serial number 487436;

for 6 cyl. tractors from serial number 487436 with disk brake housing with 47 mm (1.85 in.) in length

1

AL117418 U-joint, drive shaft for 6 cyl. tractors up to serial number 496374 with disk brake housing with 30 mm (1.18 in.) in length

1

AL167208 U-joint, drive shaft for 6 cyl. tractors from serial number 496375 with disk brake housing with 30 mm (1.18 in.) in length

1


for tractors up to serial number 392553 1

B15646 O-ring 2L155450 Clamp 2L155471 Slotted disk 2L80044 Bracket 2

AL114289 Oil line for tractors with front wheel drive only 1


Models: cab only: 6820Note:Depending on the options of the tractor,


Models: cab only: 6920, 6920SNote:Depending on the options of the tractor,


1.2 COVERSThese covers are recommended when driving underadverse working conditions like scrub and woodland.

Models: cab only: 6120 - 6920S


AL157237 Creeper kit, PowrQuad Plus or AutoQuad transmission

Bundle Description Remark QTYAL155419 Heater hose 1L154239 Formed hose 1L154240 Oil cooler hose 1L158529 Y-connector 1AL155074 Oil line assy. 1

AL156590 Bracket with suspended front axle 1

L154166 Shield flywheel, side left TLS

with suspended front axle 1

RE201075 Shaft, transmission output with bushing 1

14M7273 Nut (M8) 119M7162 Cap screw 1


AL157238 Creeper kit, PowrQuad Plus or AutoQuad transmission

Bundle Description Remark QTYAL155419 Heater hose 1L154239 Hose, formed 1L154240 Oil cooler hose 1L158529 Y-connector 1AL155076 Oil line assy. 1

AL156590 Bracket with suspended front axle 1

L154166 Shield flywheel, side left TLS

with suspended front axle 1

RE201075 Shaft, transmission output with bushing 1

14M7273 Nut (M8) 119M7162 Cap screw 1


AL163214 Covers for electro-magneticshift valves


2 HYDRAULICS

2.1 MECHANICALLY-ACTUATED SELECTIVE CONTROL VALVES -

M-SCV

The M-SCVs provide a full range of features whichgives the flexibility to operate all hydraulic equipmenton the farm. The M-SCVs are located at the rear of thetractor, at either side of the hitch valve. ISO scs aremounted to each M-SCV.Three different M-SCV versions are available: 100 resp. 101 Series, 200 resp. 201 Series or 300 resp.301 Series.100, 200 and 300 Series M-SCVs can only be usedwith PFC hydraulic system with axial piston pump.101, 201 and 301 Series M-SCVs can only be usedwith PC or HydraVantage hydraulic systems withgear pump.

300 and 301 Series M-SCVs can basically be used inall positions, but if possible they should be installed onthe left hand side (M-SCV at pos. 1 or 2). Wheninstalling them on the right hand side (M-SCV at pos.3 or 4), an additional parts kit is necessary.M-SCV Identification

• 100 or 101 Series (Standard): mechanicallyactuated, with fixed cap

• 200 or 201 Series (DeLuxe): mechanicallyactuated, with three operating positions

• 300 or 301 Series (Super DeLuxe): mechanicallyactuated, with three operating positions

100 Series M-SCV

This valve features: • A 4 position lever control that is detented as

standard• Flow of up to 60 l/min is available through the

valve• Removable detent collar• 4-way operation• Automatic detent release (if detent is fitted) when

the engine is switched off.


The M-SCV field kit also contains the correspondingquick couplers and dust protection. The below listedcontrol and mounting parts have to be orderedseparately according to the mounting position of theM-SCV.

Models: 6020 - 6920S

Control and mounting partsFor M-SCV installation on Position I

For M-SCV installation on Position II

For M-SCV installation on Position III

For M-SCV installation on Position IV(not for tractors with AutoPowr transmission)

101 Series M-SCVThis valve features: see 100 Serie M-SCV


Models: 6020 - 6620 (without cab), 6020SE - 6620SE






AL169787M-SCV Series 100 with 2 ISO-standard quick couplers and dust protection housing


AL169859 Control and mounting parts


1


for tractors from serial number 375301

1


AL169859 Control and mounting parts 1


AL169861 Control and mounting parts and spacer housing 1


AL169862Single lever control,2 functions and mounting parts

controls M-SCV on Position III and IV

1

AL153498Shifter rod for single lever control, console-integrated

for tractors up to serial number 398655 with PowrQuad Plus or AutoQuad transmission

1


AL169788M-SCV Series 101 with 2 ISO-standard quick couplers and dust protection housing




1



1








1



1


200 Series M-SCV

In addition to the features of 100 Series valves, 200Series M-SCV features:

• A variable flow control, from zero to maximumflow, and 2-way selectable detents

• 96 l/min. maximum flow (not with 60 l/min.pump)

• Selectable detents allow the switching between’No detent’, ideal for loader operation, and’Mechanical detent’, for continuous hydraulicmotor operation

• Flow infinitely adjustable from 0 to 96 l/min.• The control dial is located on the M-SCV and may

be reached from the operator’s seat• Neutral start protection releases lever to neutral

when the engine is switched off• A load check valve on the raise/extend port

prevents loader and implement linkage creep


Models: 6020 - 6920S





201 Series M-SCVThis valve features: see 200 Serie M-SCV




AL169789M-SCV Series 200 with 2 ISO-DeLuxe quick couplers and dust protection housing




1



1








1



1








300 Series M-SCV

In addition to all the features of 200 Series M-SCVs,300 Series M-SCVs incorporate a temperaturecompensated adjustable flow restrictor whichcontinuously regulates the flow of oil between zeroand maximum in both directions regardless of oiltemperature. This will give day-long constant speed operation ofhydraulic motors and rams without the need foradjustment. Selectable detents allow the operator to choose thesame modes as the 200 Series M-SCVs, and inaddition a hydraulic detent, where the M-SCV leverwill remain selected until a pre-set pressure is reached.It will then ’kickout’ of the detent to the neutralposition automatically. This mode is particularly usefulwhen repeat M-SCV operations are performed, such asturning a plough or drill marker cycling.The M-SCV field kit also contains the correspondingquick couplers and dust protection. The below listedcontrol and mounting parts have to be orderedseparately according to the mounting position of theM-SCV.

Models: 6020 - 6920S







1



1








1



1






1



1





AL169957 Right hand End Cover and connecting parts

if on Pos III or IV has not yet been installed aM-SCV Series 300/301 or anE-SCV

1



301 Series M-SCVThis valve features: see 300 Series M-SCV










1



1



1






1



1





AL169957 Right hand End Cover and connecting parts 1




1



1



1


Additional shut-off valves for selective control valvesThe shut-off valves can be installed to prevent leakageat the hydraulic SCV connections.

Models: 6020 - 6920S, 6020SE - 6620SE, 6215, 6515

SCV End Covers

Possible SCV End Covers - Left hand

Models: 6020 - 6920S, 6020SE - 6620SE

Models: 6020 - 6920S, 6020SE - 6520SE

Models: 6320 - 6920SNote: for suspended cab; paint operation for service

needed

Code Bundle DescriptionAL174687 Shut-off valve


AL77028 Left hand End Cover assembly, standard


AL163533 Left hand End Cover with additional connection


AL163534 Left hand End Cover with pressure- and LS port


Possible SCV End Covers - Right hand

Models: 6020 - 6920S

Models: 6020 - 6920S, 6520SE, 6215, 6515

Models: 6020 - 6920S, 6020SE - 6520SE, 6215, 6515Note: for 6020 - 6620 with PC and PFC systems

for 6820 - 6920S with PFC systemfor 6020SE - 6520SE with PC systemfor 6215, 6515 with HydraVantage hydraulic system

Note: Depending on the options of the tractor, additional spare parts may be required.


AL77680 Right hand End Cover assembly, standard


AL160414 Right hand End Cover with 300 Series SCV (position 3 and 4)


AL158831 Special End Cover for external control unit on right hand side


AL157634 hydraulic hose, 475mm length

for 6820 - 6920S with SCV at position 3

1

AL157635 hydraulic hose, 420 mm length

for 6820 - 6920S without SCV at position 3

1

AL157636 hydraulic hose,380 mm length

for 6020 - 6620 with or without SCV at position 3

1


Kit for return connection on hydraulic motor (PC-system and PFC-system)

Models: 6020 - 6920S, 6020SE - 6620SE, 6215, 6515Note:On PC hydraulic systems, the hydraulic motor

return must not be used continuously at maximum oil withdrawal.

Note: If a hydraulic coupler socket is required instead of internal half coupler AL81368, please order part AL81369 separately.

Power Beyond PlatePower beyond allows the use of the tractor pump topower implements that have ICV (independent controlvalves) or orbital motors. For functions requiringadditional hydraulic power, the power beyond platereplaces the fourth SCV. Pressure return and loadsensing ports are provided for hook-up of additionalequipment, such as ICV, front loader etc.

Models: 6120 - 6920S, 6020SE - 6620SENote: with ICV

Power Beyond Application Valve

Models: 6020 - 6920S, 6020SE - 6520SE

Code Bundle DescriptionAL169965 Pressure-free return circuit


AL118486Right hand End Cover, Power Beyond (with pressure-, return- and LS port) with Power Boost

Code Bundle DescriptionAL112428 Power Beyond Application valve


Power Beyond Coupler on rockshaft valveIn addition to the Power Beyond plate this kit includestwo female and two male couplers, two hydrauliclines, dust protection and hardware. ICV’s controlledimplements or attachments connected to the hydraulicsystem of the tractor are provided with a Pressure-On-Demand (POD)-signal, pressured oil and a pressure-free return line. Connection/disconnection is eased byquick coupler.

Models: 6020 - 6620Note: includes left hand End Cover AL163533 (with

the Load Sense connection)Note:For ICV’s without POD a special valve block is

required.Note:up to tractor serial number 398655

Models: 6020 - 6620Note:please order in addition AL158831 (End Cover

for external control unit on right hand side)Note: from tractor serial number 398656


AL82290 Power Beyond Coupler on rockshaft valve


EC300182 Power Beyond Coupler on rockshaft valve


2.2 M-ICV AND E-ICV

Mechanical Independent Control Valve(M-ICV) - 2 sectionThe M-ICV (mechanical independent control valve) isa separate control valve block unite mounted below theright hand side of the cab. It is fitted below the cab andsupplied with hydraulic power through the PowerBeyond valve or ICV-Cover.It is ideal for single lever control of front loader orfront hitch work.The valve features functions similar to that of twoSCVs.

• 1st function features: extend neutral retract and adetented float position

• 2nd function: extend neutral retract• The M-ICV is not detented for hydraulic motors • Both functions feature a flow capacity of 96 l/min.

at stand-by pressure and proportional flow • When a 96 l/min pump is fitted, maximum flow

capacity can be achieved with reduced engine rpmfor more comfortable operation

• More than one function may be operatedsimultaneously to speed up operations and savetime

• Proportional valves give fine adjustment forinching and operation acceleration/decelerationduring long travel movements

• A balance valve between the two functions ensuresthat both may be operated at once, ensuringprofessional operation capability, for exampleraise boom and roll back bucket

Electrical Independent Control Valve(E-ICV) - 2 or 3 sections

The E-ICV is a separate control valve unit mountedbelow the right-hand side of the cab with the functionsof two or optionally three* SCVs.

Spool movement is no longer achieved mechanically,but electrically through stepper motors (similar to theprecise, reliable and proven stepper motor rear hitchcontrol).Valve Functions All 3 valves feature proportional flow and a flowcapacity of 96 l/min. at stand-by pressure. Lever movements are transformed into electricimpulses inducing - if required - minute movementsfor precise stacking or loading operations

• This unique fine adjustment allows inchingoperation or acceleration/ deceleration duringlonger piston travel movements

• Up to three functions may be operatedsimultaneously to speed up manoeuvres whileensuring professional, parallel operation capability

• The selectable shake-out position permitsoptimum bucket cleaning through automaticvibration mode when overriding the position formax. dump speed

• Allows pre-compaction during back blading infloat position

*Only when the three SCVs option is chosen,automatically the option for the fourth and fifth SCVsis provided.

M-ICV and E-ICV field kits

Models: cab only: 6120 - 6620, 6020SE - 6520SENote: not for low profile tractorsNote: up to tractor serial number 398655Note: Depending on the options of the tractor,

additional spare parts may be required.

Code Bundle DescriptionAL159273 M-ICV & E-ICV field kit


AL155376 Oil line (pressure) with suspended cab 1

AL155377 Oil line (LS) with suspended cab 1

AL155378 Oil line (return) with suspended cab 1

AL116239 Oil line (pressure) without suspended cab 1

AL116240 Oil line (LS) without suspended cab 1

AL116241 Oil line (return) without suspended cab 1

AL157634 Hydraulic hose (LS) with PC hydr. system 1

AL157636 Hydraulic hose (LS) with PFC hydr. system 1

AL159274 Service kit M-ICV, 2 section for M-ICV 1

AL159296 Service kit E-ICV, 2 section for E-ICV 1


Models: cab only: 6820 - 6920SNote:up to tractor serial number 398655Note: Depending on the options of the tractor,


M-ICV with multi-function leverA mechanically operated multi-function lever may befitted to the front corner of the right hand console inthe cab to control up to two SCVs. The lever is usefulfor one touch operations of either one or two SCVcontrolled implements, and of particular interest whereuse is frequent, for example with front hitch control.

Models: low profile cab only: 6020SE - 6620SENote:up to tractor serial number 398655Note:This Kit is no longer available, please order

individual parts according to parts catalog.Note: Depending on the options of the tractor,



AL164525Wiring harness transmission rear, E-SCV or E-ICV

with CommandArm 1

AL164526 Wiring harness transmission rear, E-ICV

for E-ICV without CommandArm 1

AL157528Wiring harness transmission rear, ECE or SAE with E-SCV or E-ICV

for E-ICV without CommandArm; not required for suspended front axle or Premium Plus tractors

1

AL159344 Joystick for E-ICV control for E-ICV without CommandArm 1

AL159345 Joystick for E-ICV control for E-ICV with CommandArm 1

AL116589 Joystick for M-ICV control for M-ICV 1

AL153498 Shifter rod with grip, autoshift

with AutoQuad or PowrQuad Plus transmission

1

Code Bundle DescriptionAL159275 M-ICV & E-ICV field kit


AL155379 Oil line (pressure) with suspended cab 1

AL155380 Oil line (LS) with suspended cab 1

AL155381 Oil line (return) with suspended cab 1

AL116242 Oil line (pressure) without suspended cab 1

AL116243 Oil line (LS) without suspended cab 1

AL116244 Oil line (return) without suspended cab 1

AL157634 Hydraulic hose (LS) with SCV at pos. 3 1

AL157635 Hydraulic hose (LS) without SCV at pos. 3 1

AL159274 Service kit M-ICV, 2 section for M-ICV 1



AL164525Wiring harness transmission rear, E-SCV or E-ICV

with CommandArm 1

AL164526 Wiring harness transmission rear, E-ICV

for E-ICV without CommandArm 1


AL157527Wiring harness transmission rear, ECE with E-SCV or E-ICV

for E-ICV without CommandArm; not required for tractors with HCS or Premium Plus tractors

1

AL159344 Joystick for E-ICV control for E-ICV without CommandArm 1

AL159345 Joystick for E-ICV control for E-ICV with CommandArm 1

AL116589 Joystick for M-ICV control for M-ICV 1

AL153498 Shifter rod with grip, autoshift

with AutoQuad or PowrQuad Plus transmission

1

Code Bundle DescriptionAL117838 M-ICV field kit with multi-function lever

Bundle Description Remark QTYL113757 Holder 1

L114010 Suction hose, L = 1020 mm 1



M-ICV field kits - 2 section

Models: cab only: 6020 - 6920S,6020SE - 6620SE (not with low profile cab,not for tractors with CommandArm)

Note: from tractor serial number 398656Note: If M-ICV and power beyond spacer without SCV

pos. 3 is used, order additionally 3 x L169846 (screw).

Note: If M-ICV and power beyond spacer with SCV pos. 3 is used, order additionally 3 x R95614 (screw).


Models: cab only: 6020SE - 6420SE(with low profile cab)

Note: from tractor serial number 398656Note: If M-ICV and power beyond spacer without SCV

pos. 3 is used, oder additionally 3 x L169846 (screw).

Note: If M-ICV and power beyond spacer with SCV pos. 3 is used, order additionally 3 x R95614 (screw).

E-ICV field kits - 2 or 3 sections

Models: cab only: 6120 - 6920SNote: from tractor serial number 398656Note: If E-ICV and power beyond spacer without SCV


Note: If E-ICV and power beyond spacer with SCV pos. 3 is used, order additionally 3 x R95614 (screw).


L114011 Hose ID 25 - 630 mm 1

L113893 Special screw, M14 x 110 1

L114657 Bracket only with exhaust stack to bottom right 1

L114658 Exhaust pipe only with exhaust stack to bottom right 1

L113323 Bracket only with exhaust stack to bottom right 1

Code Bundle DescriptionAL162450 M-ICV field kit


AL164711 Basic Kit 6020 - 6620, 6020SE - 6620SE 1

AL116239 Pressure line with unsuspended cab 1

AL163522 Load sensing line with unsuspended cab 1

AL163523 Return line with unsuspended cab 1

AL155376 Pressure line with suspended cab 1

AL163525 Load sensing line with suspended cab 1

AL163526 Return line with suspended cab 1

AL116536 Pressure line with open operator’s station 1

AL116537 Load sensing line with open operator’s station 1

AL116538 Return line with open operator’s station 1

Bundle Description Remark QTYAL164710 Basic Kit 6820 - 6920S 1









AL164712 M-ICV field kit with power beyond plate and needed oil lines

Code Bundle DescriptionAL159296 E-ICV field kit with 2 sections

Bundle Description Remark QTYAL164711 Basic Kit 6120 - 6620 1








Models: cab only: 6120 - 6920SNote: from tractor serial number 398656Note: If E-ICV and power beyond spacer without SCV


Note: If E-ICV and power beyond spacer with SCV pos. 3 is used, order additionally 3 x R95614 (screw).


Flow control for E-ICV

Models: 6120 - 6920SNote: from tractor serial number 398656Note: Depending on the options of the tractor,










Code Bundle DescriptionAL159297 E-ICV field kit with 3 sections

Bundle Description Remark QTYAL164711 Basic Kit 6120 - 6620 1















Code Bundle DescriptionAL170031 Flow control for E-ICV


AL166106 Instrument, dual gauge plus II/ECE

without AutoPowr transmission 1

AL166108 Instrument, dual gauge plus II/ECE

with AutoPowr transmission 1



2.3 ELECTRICALLY-ACTUATED SELECTIVE CONTROL VALVE -

E-SCVThe electrically-actuated SCVs with adjustable flowrates and timed detents are exclusively available forthe 6020 Series John Deere Premium Plus cab models .A programmable electronic controller controls SCVfunctions via a solenoid in each valve. The valve hasno direct control linkage. Out of this result thefollowing advantages:

• Eases operator effort, reducing shift forces andfatigue in repetitive operations.

• Reduced wear of parts and lower maintenancecosts.

SCV controls are located in the Command ArmTm foreasier operation. Valve can easily be re-programmedfrom the operator’s seat for different implements orvariable conditions. Information on valve status isdisplayed on the LCD display, located on the centerdashboard unit.

E-SCVs

The E-SCV field installation kit contains in addition tothe E-SCV parts as well the needed actuatingcomponents for installation in the operator’s station.

Models: cab only: 6320 - 6920SNote:only for tractors with CommandArmNote: If SCV will be installed on Position III please

order separately:


AL169971 Kit fo parts for E-SCV’s atposition III or IV




1

AL161388 Spacer (Power Beyond) with adjustable LS-bleed

for tractors from serial number 398656 without ICV’s

1


2.4 MISCELLANEOUS

Additional oil reservoir 12,5 litres

An additional hydraulic oil tank is available to increasethe hydraulic oil capacity with 12,5 litres (from 25 to37,5 litres max. permissible oil withdrawal for shortterm use (e.g. tipping trailers), while allowing thetractor to run on inclines up to 18 degrees). Thisreservoir mounts above the main hydraulic pump,under the cab.

Models: cab only: 6120 - 6620Note:This Kit is no longer available, please order

individual parts according to parts catalog.

Additional oil reservoir 14 litres

For applications which need more than 12,5 litresadditional hydraulic oil, John Deere offers a hydraulicoil reservoir with 14 litres to increase the withdrawalcapacity of your hydraulic system.


Note: for tractors with ICV order in addition

Note: for tractors with AutoPowr transmission order in addition

Note: for tractors without AutoPowr transmission order in addition

Models: cab only: 6520 - 6620Note: for tractors with ICV order in addition


Code Bundle DescriptionAL158981 Additional oil reservoir


8897 AL163978 Hydraulic oil reservoir - 14 litres, with quick connector system

Bundle Description Remark QTYL158929 Protection hose 1

Bundle Description Remark QTY19M8169 Screw 2

Bundle Description Remark QTY19M8823 Screw 2


AL163979 Hydraulic oil reservoir - 14 litres, with quick connector system

Bundle Description Remark QTYL158929 Protection hose 1


AL163980 Hydraulic oil reservoir - 14 litres, with quick connector system


Models: cab only: 6120 - 6620Note: for tractors with air brakes please order in

addition:


AL172666 Additional hydraulic oil reservoir -14 litres, with quick connector system

Bundle Description Remark QTYAL171461 Line 6120 - 6420 1AL171462 Line 6520, 6620 1

AL171460 Holding clamp for compresssed air tank 1

19M7496 M12 cap screw 219M8049 M10 cap screw 224M7028 Washer 214M7274 M10 hex nut 2


3 ENGINE

Bottom guard for fuel tanksRecommended in adverse conditions, like scrub,woodland or land reclamation.

Models: without cab: 6020 - 6420Note:Please order additionally needed mounting

parts according to the latest parts catalog.

Models: cab only: 6520 - 6920, 6520SE, 6620SE

Models: 6020 - 6420S, 6020SE - 6420SE

Models: 6820 - 6920S


Fuel PreheaterParticularly important in the cold season, fuelpreheaters prevent fuel waxing and subsequent filterblockage by automatically actuating a heater elementin the filter at low temperatures.

Models: 6020 - 6920S, 6020SE - 6520SENote:not for level 4 engine, i.e. not for Bosch VP44

injection pump

Code Bundle DescriptionAL113689 Base guard for fuel tank, 116 l

Code Bundle Description8875 AL118241 Base guard for fuel tank, 207 l


8875 AL156243 Base guard for fuel tank (160 l, 165 l, 185 l)

Code Bundle Description8875 AL159939 Base guard for fuel tank, 250 l

Code Bundle DescriptionAL163513 Base guard for fuel tank, 325 l

Code Bundle DescriptionAL158520 Fuel Preheater


Models: 6320 - 6920SNote: for level 4 engine, i.e. for Bosch VP44 injection

pump

Coolant heaterPlugs into 220-volt electric wall socket, the integratedheater element warms the engine block to provideeasier starting even in the coldest weather.

Models: cab only: 6120 - 6920S, 6020SE - 6520SE

Cold start package


Note: with PowrQuad or AutoQuad transmission for use in Sweden, Finland and Norway

Note: if the tractor is not already equipped with a coolant preheater, please order in addition 1 x AL151508 coolant preheater, 230V

Note: This Kit is no longer available, please order individual parts according to parts catalog.

Code Bundle DescriptionAL159374 Fuel Preheater

Code Bundle DescriptionAL151508 Coolant preheater, 230V

Code Bundle DescriptionAL158792 Cold start package, 230V


Fuel pre filtersProvide higher water and dirt protection to the fuelsystem of your tractor. Bad fuel quality requires bestfiltration. For this purpose pre filters can provide extrafiltration. Therefore, John Deere offers several prefilter kits which provide:

• pre filtration of dust and particles to support themain fuel filter

• separation of water to protect the fuel injectionpump and engine

The pre filter kits are mounted additionally to theordinary fuel filter and are supplied with all mountingand connecting parts. The fuel pre filters have thesame service interval as the fuel filter.

Models: 6020 - 6420S, 6020SE - 6420SE

Note:This Kit is no longer available, please order individual parts according to parts catalog.

Note:Depending on the options of the tractor, additional spare parts may be required.

Models: 6520, 6520SE, 6515Note:This Kit is no longer available, please order

individual parts according to parts catalog.Note:Depending on the options of the tractor,


Code Bundle DescriptionAL160215 Fuel pre filter


AL159197 speed control rod assembly

for 6020, 6320-6420S, 6020SE, 6320SE, 6420SE with Lucas injection pump (mech.)

1


for 6120, 6220, 6120SE, 6220SE, 6215 with Stanadyne injection pump (mech.)

1


for 6120 low profile, 6220 low profile without cab, with Stanadyne injection pump (mech.)

1


for 6020SE low profile, 6320SE low profile, 6420SE low profile, with Lucas injection pump (mech.)

1


for 6020 low profile, 6320 low profile, 6420 low profile without cab with Lucas injection pump (mech.)

1


6120SE low profile, 6220SE low profile with Stanadyne injection pump (mech.)

1




for Lucas injection pump (mech.) 1


for Stanadyne injection pump (mech.) 1



Models: cab only: 6320 - 6420SNote:This Kit is no longer available, please order

individual parts according to parts catalog.Note: with electronical fuel injection, level 4


individual parts according to parts catalog.Note:with electronical fuel injection, level 4

Water in Fuel Sensor

Models: 6320 - 6920SNote: for 4 cylinder tractors with 4-Valve CommonRail

PowerTech engine from engine serial-no. 800.000 up to engine serial-no. 811.593

Note: for 6 cylinder tractors with 4-Valve CommonRail PowerTech engine from engine serial-no. 800.000 up to engine serial-no. 811.673

Models: 6020 - 6220 (DE10 injection pump),6320 - 6920S (CommonRail injection system),6020SE - 6620SE (DE10 injection pump),6215, 6515 (DE10 injection pump)

Note: for tractors with 2-Valve PowerTech enginefrom engine serial-no. 800.000

Note: for 4 cylinder tractors with 4-ValveCommonRail PowerTech engine fromengine serial-no. 811.594

Note: for 6 cylinder tractors with 4-ValveCommonRail PowerTech engine fromengine serial-no. 811.674



Code Bundle DescriptionRE509677 Wiring harness, water sensor, 12V

Code Bundle DescriptionRE519696 Wiring harness, water sensor, 12V


Protective panelsOn tractors without cab the protective panel reducesthe heat flow coming from the side grill to theoperator’s station. The engine cooling performance isnot affected.

Models: without cab: 6020 - 6420, 6215Note:This Kit is no longer available, please order


Models: without cab: 6520, 6620, 6515Note:This Kit is no longer available, please order


Code Bundle DescriptionAL161912 Air flow deflector - protective panel

Code Bundle DescriptionAL161913 Air flow deflector - protective panel


4 ELECTRICAL - ELECTRONICAL COMPONENTS

4.1 LIGHTS

Beltline Headlights H4These adjustable head lamps are fitted left and right tothe beltline of the cab. The halogen-type H4 bulbsprovide excellent illumination to the front and arestrongly recommended if front mounted equipment isto be used, especially e.g. for highway use when aloader or front linkage mounted implements obscurethe beam of the normal head lamps.

Models: cab only: 6120 - 6920SNote: not compatible with H3 working lights

beltline-mounted (code: 9071)


Models: cab only: 6020SE - 6520SE



9070 AL157097 2 beltline-mounted headlights H4,for right hand traffic


AL159314 2 beltline-mounted headlights H4, for left hand traffic


AL161122 2 beltline-mounted headlights H4,for right hand traffic


AL161125 2 beltline-mounted headlights H4, for left hand traffic


Working lights H3 - Beltline-mountedThese adjustable lamps are fitted left and right tobeltline of the cab. Especially for normal off-road usethe halogen-type H3 bulbs provide excellentillumination of a loader, front-mounted equipment orsoil and crops and to the side of the tractor.

Models: cab only: 6120 - 6920SNote: not compatible with H4 headlights beltline-

mounted (code: 9070).

Front corner work lightsFor increased illumination of the front working area,additional lamps are directed downward and outwardto light the area immediately inside and ahead of thefront wheels. This will help operators following aplough furrow or drill marker furrow at night. Thelamps may be switched off for road travel.

Models: 6020 - 6920S, 6020SE - 6620SENote: Depending on the options of the tractor,


Code Bundle Description9071 AL157099 2 working lights H3 beltline-mounted Code Bundle Description

AL159352 Front corner work lights


AL155611 Rocker switch

6020 - 6520 with open operator’s station

6020 - 6420 with low-clearance operator’s station

6020SE - 6620SE with cab

1

AL114046 Rocker switch 6120 - 6920S with cab 1


Work lights open operator’s station

Models: without cab: 6020 - 6520

Additional work lights cab-roof mounted

Models: cab only: 6120 - 6920SNote: if the tractor is equipped with wiring harness

AL159155 ( from tractor serial no. XXXXXX) which provides two connections for work lights on the cab roof , order in addition wiring harness AL156254 which provides the needed four connections to install the work lights

Models: cab only: 6120 - 6920SNote: if the tractor is equipped with wiring harness

AL159155 ( from tractor serial no. XXXXXX) which provides two connections for work lights on the cab roof , order in addition wiring harness AL156254 which provides the needed four connections to install the work lights



Xenon rear work lights

Code Bundle DescriptionAL79915 Work lights, at rear of 2-post ROPS


AL161617 Two additional work lights, cab-roof mounted, FRONT


AL161618 Two additional work lights, cab-roof mounted, REAR


AL161895 Two additional work lights, cab roof mounted, FRONT


AL161897 One additional work light, cab roof mounted, REAR


Xenon headlights are firmly established within theautomobile industry, for giving the driver increasedvisibility. Xenon lights offer more advantages when used in thefield and John Deere gives the operator the opportunityto use them to their fullest potential. Advantages:

• 2.5 times the light flux (illuminance) of a halogenFree Form working light.


Code Bundle DescriptionAL172073 Xenon working lights, rear


4.2 MISCELLANEOUS

Multiple power outlet socket

Models: cab only: 6120 - 6920SNote: Depending on the options of the tractor,


3-terminal power outlet socketThe 3-pin socket provides both 5 and 25 amp suppliesfrom the first two pins. The third pin is connected toearth.


Battery cut-off switch (4 cyl.)

Models: 6120 - 6420S, 6020SE - 6420SENote: order in addition adapter wiring harness

AL166461 for SE models up to tractor serial number 413917


Battery cut-off switch (6 cyl.)

Models: 6520 - 6920S, 6520SE, 6620SENote: order in addition adapter wiring harness

AL166461 for SE models up to tractor serial number 413917


Code Bundle Description9146 AL158785 Multiple power outlet socket

Bundle Description QTYAL155784 Bracket (with CommandArm) 1AL117211 Bracket (without CommandArm) 1

Code Bundle DescriptionAL160799 3-terminal power outlet socket

Code Bundle DescriptionAL171054 Battery cut-off switch

Bundle Description QTY

AL153812 Battery-negative cable / 1.500 mm length (up to motor serial-no. 799.999) 1

AL159445 Battery-negative cable / 1.500 mm length (from motor serial-no. 800.000) 1

Code Bundle DescriptionAL171055 Battery cut-off switch

Bundle Description QTY

AL153812 Battery-negative cable / 1.500 mm length (up to motor serial-no. 799.999) 1

AL159445 Battery-negative cable / 1.500 mm length (from motor serial-no. 800.000) 1


Back-up alarmFor customers who require an alarm in reverse speed.It is rear mounted.

Models: 6120 - 6920S, 6020SE - 6620SENote: for tractors with SyncroPlus or PowrQuad

transmission

Models: 6320 - 6920SNote: for tractors with AutoPowr transmission

Code Bundle DescriptionAL158728 Field installation kit for back-up alarm

Code Bundle DescriptionAL164284 Field installation kit for back-up alarm


5 MISCELLANEOUS

5.1 OPERATOR´S STATION

New Cab AccessoriesJohn Deere offers new accessories for the highest inoperator comfort and convenience! Personalize yourtractor cab and underline the high-quality appearanceof your tractor with the following new accessories.

Leather cushions with seat heatingThe dark brown leather seat cushion kit includes seatand backrest cushions as well as a backrest extension.The new leather trims provide the ultimate in operatorcomfort; especially the extra thick seat cushion and thebackrest extension help to reduce operator fatigue formore productivity even on long working days. Inaddition, the integrated seat heating provides optimumcomfort on cold winter days.As an additional eye-catcher the name John Deere isembroidered on the backrest extension. The robust and longevity leather is easy to clean andabrasion-proof.

Models: cab only: 6120 - 6920S, 6020SE - 6620SENote:Leather seat cushion is only compatible with

MSG95 seats with adjustable seat cushion inclination and seat pan depth adjustment (see picture below).

Note:For seats without seat heating please order in addition AL151005 wiring harness and AL151010 switch.

Leather steering wheelThe new dark-brown leather steering wheel is elegantin appearance and provides a comfortable grip evenduring long working days! It is produced in the high-standard John Deere qualityand features the same adjustability as the standardsteering wheel.

Models: 6120 - 6920S, 6020SE - 6620SE

Stainless steel heat protectionfor exhaust pipeFor an individual and elegant look John Deere offersthe new stainless steel heat protection for the exhaustpipe.

It is produced in the high-standard John Deere qualitywhich ensures durability and a long service life.


AL174350Dark brown leather cushions and backrest with preparation for seat heating for MSG95 seats

Code Bundle DescriptionAL173828 Dark brown leather steering wheel


Models: 6120 - 6420S, 6020SE - 6420SE

Models: 6520 - 6920S, 6520SE, 6620SE

Wood-look trimsPersonalize your tractor cab with the new wood-looktrims. The kit includes decorative covers for the radioconsole as well as the rear and front part of theheadlining - one with preparation for sunshade. The new interior parts are easy to install and give yourJohn Deere tractor an elegant and extraordinary look!



AL178133 Stainless steel heat protection for exhaust pipe


AL175376 Stainless steel heat protection for exhaust pipe

Code Bundle DescriptionAL174268 Wood-look trims


SeatingSeats are ergonomically designed and covered instylish, easy to clean cloth upholstery.

Active Carbon Layer An active carbon layer is used in the seat, to allow it tobreathe. This results in less sweating and furtherincreases the comfort of the operator.

Low Frequency SuspensionThe low frequency suspension technology nowabsorbs shocks as low as 1.2 Hz and offers superiorback protection and driving comfort. In the past the driver had to select a hard suspension toavoid bottoming of the seat when it reaches the lowerlimit. With the low frequency seat a soft setting of thesuspension is possible without the risk of hitting theupper or lower limit.This is achieved with an increased air volume and lowfriction bearings.No additional shock absorber is required.The system is designed according to suit the hydrauliccab suspension frequency of 1.0 Hz and the TLS II.The result is a floating but firm and sure feeling for thedriver for relaxed driving and better health.

Super Comfort seat - MSG85

Mechanical seats features: • Mechanical seat suspension• Horizontal adjustment 210 mm• 100 mm vertical suspension travel• Backrest inclination• Mechanical weight and height adjustment (80 mm)• Mechanical lumbar support• Horizontal suspension (-22 mm/+27 mm)• Lateral suspension (+/-25 mm)• Seat pan depth adjustment • Seat cushion inclination• Active carbon layer• Fold down armrest• +/-10° armrest inclination• Operators manual holder• 15° Swivel

Models: cab only: 6120 - 6920S, 6020SE - 6620SENote: order in addition seat belt AL117366 and

shield right hand side L114944 and shield left hand side L114945

Models: all open operator’s station models


AL164161 Super Comfort seat MSG85, mechanical suspended


AL164159Super Comfort seat MSG85, mechanical suspended;seat cover yellow, vinyl


Super Air Comfort seat - MSG95

Air suspended seat features:• Air suspension with low frequency technology or

air suspension with high frequency suspension fordifferent suspension conditions

• Horizontal adjustment 210 mm for easypositioning in the cab

• 100 mm vertical suspension travel to absorb eventhe hardest shocks

• Backrest inclination• Integrated telescopic backrest extension from 475-

645 mm for optimum back support• Automatic weight and height adjustment (80 mm)

brings the ideal position for every body height• Mechanical or pneumatic lumbar support

(pneumatic support allows a more quick and exactadjustment of the lumbar support to prevent backproblems)

• Horizontal suspension (-22 mm/+27 mm) to damposcillations of implements, trailers at high speed orin difficult terrain

• Lateral suspension (+/- 25mm) reliefs the driverfrom side shocks

• Seat pan depth adjustment to optimize the supportof the legs

• Seat cushion inclination in 4 steps to reliefpressure from the knees

• Active carbon layer• Seat heating• Fold down armrest• +/-10° armrest inclination• Height adjustable armrest• Operators manual holder• Swivel +/-15° for easy access in and out of the seat

as well as easier control of rear implements• Optional CommandArm

Models: cab only: 6120 - 6920S, 6020SE - 6620SENote: order in addition seat belt AL117366

Models: cab only: 6320 - 6920SNote: for tractors equipped with AutoPowr;

order in addition seat belt AL155363

Super Comfort seat

• Air suspension, low frequency• Cushion cloth brown “Alaska” with carbon• Foldable armrests with height and angle

adjustment• Height adjustment 80 mm• Horizontal adjustment 210 mm• Backrest angle adjustment• Fore and aft isolator• Lateral horizontal isolator• Lumbar support• Weight adjustment• Seat depth and angle adjustment• Adjustable swivel +/- 180°• Seat switch• Seat heating• Manual holder• Seat belt• Headrest



AL154352Super Air Comfort seat MSG95, air suspended , with seat switch (without CommandArm)


AL154354Super Air Comfort seat MSG95, air suspended, with seat switch (with CommandArm)

Code Bundle DescriptionAL157569 Super Comfort seat MSG95


Comfort seat - MSG83• Mechanical suspension• Horizontal adjustment 210 mm• Vertical suspension stroke 80 mm• Height adjustment 60 mm• Weight adjustment• Backrest angle adjustment• Foldaway armrests• Seat switch• Cushion vinyl yellow

Models: without cab: 6020 - 6420Note: if seat belt is required please

order in addition AL117283

• Mechanical suspension• Horizontal suspension 45 mm• Horizontal adjustment 210 mm• Vertical suspension stroke 80 mm• Height adjustment 60 mm• Weight adjustment• Mechanical lumbar support• Backrest angle adjustment• adjustable swivel 20°• Foldaway armrests• Seat switch• Cushion vinyl yellow

Models: without cab: 6020 - 6420Note: if seat belt is required please

order in addition AL117283

Seat belt for Super Comfort seatsFor operator’s safety, recommended for all cabtractors.

Models: 6120 - 6920SNote: for seat MSG 85 and MSG 95 without

CommandArm

Models: cab only: 6020 - 6920S, 6020SE - 6520SENote: for seat MSG 95 with CommandArm

Models: without cab: 6020 - 6420Note: for seat MSG44

External swivelThe seat can be swiveled 180 degrees which allows aneasy operation of rear mounted equipment.

Models: 6020 - 6920S, 6020SE - 6520SENote: for AL164161 Super Comfort seats MSG85

and AL154352 Super Air Comfort seats MSG95 without CommandArm

Code Bundle DescriptionAL164156 Comfort seat MSG83

Code Bundle DescriptionAL164158 Comfort seat MSG83

Code Bundle Description9240 AL117366 Seat belt

Code Bundle DescriptionAL155363 Seat belt

Code Bundle DescriptionAL117254 Seat belt

Code Bundle DescriptionAL119292 External adapter, 180° swivel


Instructional seat

The comfortable, soft-moulded instructional seat,complete with backrest, is located to the left of theoperator. Due to the overall roominess of the cab, theinstructional seat has excellent access with plenty ofhead and shoulder clearance along with large leg-roomarea. A grab handle on the “A” post and an additional grabrail on the door will help the passenger to feel safe andsecure, even over rough terrain. When not required, the seat can be simply foldedaway.


Safety belt for instructional seat


Instructional seat with Suspension

The instructional seat with suspension offers a highlevel of ride comfort. The shock absorbing suspensions is totally adjustablefor passenger weight.

Suspension for instructional seatAllows easy conversion of an unsuspendedinstructional seat into a suspended one.


Code Bundle Description9230 AL114321 Instructional seat (not suspended)

Code Bundle DescriptionAL117734 Safety belt for instructional seat

Code Bundle Description9231 AL114856 Suspension for instructional seat


Inner rear view mirror


Internal rear view mirrorThe additional rear view mirror is installed on theright-hand side of the rear window (in direction oftravel). It provides an excellent view on swingingdrawbar and rear-end attachments.


External MirrorsLarge external mirrors provide increased trafficawareness for improved road safety and aid trailerreversing.

Telescopic rear view mirrorsTelescopic mirrors offer manually adjustabletelescopic arms with manually adjustable mirrors. Themirror mounts are offset on the stem to allow forfurther adjustment and better head clearance whenentering the cab.



Code Bundle Description9205 AL175679 Inner rear view mirror


AL151224 Additional inside rear view mirror,rear installation

Code Bundle Description7704 AL80126 Left hand telescopic rear view mirror

Code Bundle Description7705 AL80127 Right hand telescopic rear view mirror


Electrical, telescopic and heatedexternal mirrorsYou can keep track of your daily work in a much moreconvenient and comfortable way. The electricallyadjustable mirrors allow one man to set and adjust anexact positioning of the external mirrors whilechecking the view without leaving the driver’s seat.The mirrors feature electrically adjustable telescopicarms, electrically adjustable mirror heads as well asheating to remove condensation and frost.


Front license plateIf the original number plate on the engine hood isconcealed by front-mounted implements, a new licenseplate may be attached to the rear-view mirror on theright hand side.


Rear windscreen wiperLarge rear windscreen wipers, with intermittentswitching, maintain good vision in bad weather.Micro-switches are used to isolate wiper motorswhen the windscreens are open.




AL157751 Electrical, telescopic and heated external mirrors


AL162357Installation of front license platemount on tractors with front-mounted implements

Code Bundle Description9100 AL157191 Rear windscreen wiper


AL153672 Rear window wiper andwasher system


Rear windshield washerThe reservoir for the rear windshield washer isinstalled under the right-hand step. It can be reachedeasily, allows quick refilling.


Water deflectors for the rear window


Radio antenna in inner cab roofFor installation on the left-hand side of the inner cabroof (viewed in direction of travel).


Performance monitor

The performance monitor is available for all 6020Series tractors.

Code Bundle DescriptionAL158767 Rear windshield washer

Code Bundle DescriptionAL162899 Water deflectors for the rear window

Code Bundle DescriptionAL173267 Radio antenna in inner cab roof


It can be installed on the upper right "A" post in thecab and is connected directly to the tractor's electricalsystem via the on-board CAN-BUS communicationlink. This dedicated system allows the monitor to beintegrated with other tractor systems.The unit features:

• Accurate "distance travelled" measurement * • Display of true forward speed **• Programmable implement width function allows

accurate measurement of area covered * • Measurement and display of wheel-slip %, both

numerically and graphically, combined with visualand audible slip alarm. **

• This helps to boost productivity and reduce tyrewear *

• Work-rate calculation in area/unit time - a usefulmanagement tool to optimise work-rates.

• "Implement-up" and "Implement-down" modelinked to the quick raise/lower switch so that theheadland travel distance is not counted whenaccurate area measurement is required.

• Display of precise rear and front PTO speeds foraccurate monitoring of implement performance.

• Programmable service indicator allowing theoperator to select the number of engine hours tothe next service.

• An audible and visual signal indicates when this time has elapsed.

• This allows optimum service intervals forpeak tractor performance.

• Variable illumination intensity ensuring that theoperator can read the monitor easily, even at night.

The accuracy of the points marked * will be greatlyenhanced if the performance monitor is used inconjunction with a John Deere radar unit.The points marked with ** can only be displayed inconjunction with the John Deere radar unit.


Dual Beam Radar Sensor

Make sure your wheel slip is optimal - between 8% to12% for tractors with MFWD and 10% to 15% fortractors with two-wheel drive. Monitor your wheel slipaccurately with a dual beam radar sensor - save fuel,avoid soil compaction, increase your tractiveperformance, improve your efficiency.Benefits of NEW dual beam design:

• Assures a powerful and accurate signal - Dualbeam output makes radar less susceptible to hardsurface tall/wavy grass interferences.

• Accuracy is aided by a heavy-gauge mountingbracket and rubber isolators that reduce chancesthat vibration can effect the radio signal.

• Has a fast update rate - when the tractor comes tostop, accelerates or varies speed indicated groundspeed on the tractor display will closely match theactual ground speed.

• Dual beam radar sensors are self-calibrating, nosetup time is needed anymore.

The radar sensor may be installed only on tractorsequipped with a Basic Control Unit (BCU).

Models: 6120 - 6920SNote:please order in addition AL171547 field

installation kit with mounting parts



Code Bundle Description9135 AL156832 Performance monitor


RE243242 Ground speed radar sensor unitfor Europe only


RE218823 Ground speed radar sensor unitfor UK and Ireland only




Models: 6120 - 6920S

Field office

The field office for the 6020 Series tractors is a largeportfolio pouch where papers, operator manuals, musiccassettes, personal notes and implements information,or even a laptop computer can be stored.The entire unit is removable to be carried like a briefcase. Its base is also pre-wired to accommodate electronicdevices like mobile telephones, or laptop computers.The lid provides a flat writing surface.



RE243241 Ground speed radar sensor unitfor Australia only


AL171547 Field installation kit with mounting parts for ground speed radar sensor

Code Bundle Description9220 AL157091 Field office without beverage holder


Models: cab only: 6120 - 6420

Sun visor

Fold down sun visor to keep that low level sun out ofthe operator’s eyes, from dawn to dusk.


Sunshade front or rearThe John Deere pull-down sunshade improveoperator’s comfort on sunny days by blocking directlight and reducing glare. In addition, they eliminateheat build-up in the cab. Due to an independentvertical adjustment the shades can be lowered andraised to any desired position - for highest operator’scomfort. This kit can be mounted to the front or rearwindow and include all needed hardware for fieldconversion - for an easy and convenient installation.



Beverage coolerSpecifically designed for the operator’s station thebeverage cooler can be securely stored and easilyremoved. Especially on hot days the operator willappreciate the insulating capacity keeping food anddrinks cool.


Code Bundle DescriptionAL157090 Field office with beverage holder

Code Bundle DescriptionAL157620 Sun visor installation

Code Bundle DescriptionAL174359 Sunshade front or rear

Code Bundle DescriptionAL175264 Sunshade front or rear


9215 AL112070 Cool box (incl. fastening straps, bracket and hardware)


Bottle holder

John Deere offers a new bottle holder for convenientand safe storage of bottles in 6020 Series cabs. Ruggedplastic provides the accustomed John Deere quality.The bottle holder is installed underneath the operator’sseat in the corner between the step in the floor and theconsole.

Models: cab only: 6120 - 6920SNote: not in combination with suspended

instructional seat

Cup-holder

Models: cab only: 6120 - 6920SNote: the cup-holder cannot be installed on tractors

equipped with a cool box

Foot throttle

Models: 6215, 6515

Code Bundle Description9216 AL156731 Bottle holder, left hand

Code Bundle Description9218 AL163826 Cup-holder on front right post

Code Bundle DescriptionAL153668 Foot throttle


Floor-mat

Models: cab only: 6120 - 6920SNote: from tractor serial no. 398656, floor-mat

L156599 requires alteration on its underside

AshtrayThe ashtray is offered with hinged lid and made ofnon-flammable materials. The design conforms to therequirements of the accustomed John Deere design.The installation is easy because the ashtray fits to theexisting recess.

Models: cab only: 6120 - 6920S, 6020SE - 6620SENote: from tractor serial no. 357393

Cigarette lighterThe lighter is conforming to the accustomed JohnDeere Design and is supplied with socket andclamping sleeve. The power supply is provided by theregular 12V power system of your John Deere tractor.

Models: cab only: 6120 - 6920S, 6020SE - 6620SENote: from tractor serial no. 357393

Code Bundle DescriptionAL168015 Rear floor-mat

Code Bundle DescriptionAL164673 Ashtray

Code Bundle DescriptionAL173370 Cigar lighter


Chock Block

Models: 6120 - 6920S, 6020SE - 6620SENote:Depending on the options of the tractor,


Right hand step kitsThe large, non-slip footsteps feature a quick, sure-footed entry. Footsteps are also designed to shed mudand debris from operator’s shoes.

Models: without cab: 6520, 6515

Models: 6215Code Bundle Description

LG102426 Chock Block


AL156154 Bracket for installation on the left hand side 1

AL167955 Bracket for installation on the right hand side 1

Code Bundle Description8866 AL115672 Step kit, right hand

Code Bundle DescriptionAL116924 Step kit, right hand


Multi-function control lever for M-ICV

A mechanically operated multi-function lever may befitted to the front corner of the right hand console inthe cab to control M-ICV. The lever is useful for fronthitch control. The integrated design of the leverensures that operations have a natural feel which soonbecome second nature.

Models: cab only: 6120 - 6920S, 6020SE - 6520SENote:not for low profileNote:up to tractor serial number 398655

Models: for open operators station: 6020 - 6920S,6020SE - 6620SE


Note: from tractor serial number 398656

Models: for open operators station low profile:6020 - 6920S, 6020SE - 6620SE








Code Bundle DescriptionAL116589 Joystick for M-ICV control


AL164947 Joystick for M-ICV control (floor-mounted)






AL164951Joystick for M-ICV control (floor-mounted); lever with additional switches for 3 diverter valves



Note: for tractors with AutoQuad Plus or PowrQuad Plus transmission








Joysticks for E-ICV control

The shape and size of the Single Lever Controlcorresponds to the anatomy of the operator's hand. Itfeatures two push buttons and one proportional controltoggle switch integrated in the grip to control up to 5functions.An integrated safety guard prevents unintentionalimplement operation. Lever functions are onlytransmitted, if the guard is tilted away by the grippinghand. A toggle switch at the base of the lever allowsfunction to be disengaged when not in use, e.g. fieldwork, transport etc.For optimum forearm ergonomics, lever position canbe adjusted through movement of its base in thehorizontal plane. To permit free entry/access via theright-hand side door, it can further be swivelleddownwards - out of the way.The maximum number of double acting controlvalves in combination with Single Lever Controlincreases to six.

Models: cab only: 6120 - 6920SNote: From tractor serial number 398656 and

depending on the options of the tractor, additional spare parts may be required (see table below).

Note: If diverter valves (for 4th and 5th function) are applied, order additionally 1 x DC51685 (wiring harness).


AL164953Joystick for M-ICV control (floor-mounted); lever with additional switches for 3 diverter valves and gear shifiting




AL164952Joystick for M-ICV control (floor-mounted); lever with additional switches for 3 diverter valves


AL159344 Joystick for E-ICV control without CommandArm


AL164526 Wiring harness 6120 - 6920S without CommandArm 1


Models: cab only: 6320 - 6920SNote:From tractor serial number 398656 and

depending on the options of the tractor, additional spare parts may be required (see table below).

Note: If diverter valves (for 4th and 5th function) are applied, order additionally 1 x DC51685 (wiring harness).

2-Post roll guard

Models: without cab: 6020 - 6520, 6215, 6515

Air conditioning systemThe 6020 air conditioning system is powerful enoughto keep a comfortable in-cab temperature, whatever theoutside conditions are. The air conditioning systemuses ozone-friendly R134A refrigerant.

AL157528 Wiring harness6120 - 6620 without CommandArm; not for tractors with TLS-axle

1

AL157527 Wiring harness6820 - 6920S without CommandArm; not for tractors with TLS-axle

1


AL159345 Joystick for E-ICV control with CommandArm


AL164525 Wiring harness 6320 - 6920S with CommandArm 1


Code Bundle DescriptionAL119439 2-Post roll guard






Code Bundle DescriptionAL157956 Air conditioning system, 4 cyl.

Bundle Description Remark QTYAL161500 Refrigerant hose 1AL157596 Deflexion roll without air-brakes 1

L111601 drive belt, 2475 mm length without air-brakes 1

L114293 drive belt, 2525 mm length with air-brakes 1

L167673 Console, air conditioning compressor without air-brakes 1

L153258 Coolant hose,top of cooler

without air-brakes; without engine Stage II to 97/68/EC

1

L154872 Coolant hosewithout air-brakes; with engine Stage II to 97/68/EC

1

R128661 Pulley for fan without air-brakes 1

AL112101 Refrigerant hoseReceiver-drier to evaporator, up to tractor serial no. 398790

1

AL158320 Refrigerant hoseEvaporator to compressor, suction side, with air-brakes

1

AL158321 Refrigerant hoseEvaporator to compressor, suction side, without air-brakes

1

AL173843 Refrigerant hose

Evaporator to compressor, suction side, with Stage II engine to 97/68/EC, with air-brakes

1


Evaporator to compressor, suction side, with Stage II engine to 97/68/EC, without air-brakes

1

AL162467 R134A receiver-drier Up to tractor serial no. 398790 1

AL163559 R134A receiver-drier From tractor serial no. 398791 1

AL179933 Refrigerant hoseReceiver-drier to evaporator, from tractor serial no. 398791

2

Code Bundle DescriptionAL157957 Air conditioning system, 6 cyl.

Bundle Description Remark QTYAL161500 Refrigerant hose 1

AL157596 Deflexion roll 6520 - 6920S without air-brakes 1

L111600 Drive belt, 2460 mm length

6620 without air-brakes 1


6520 without air-brakes 1

L114293 Drive belt, 2525 mm length 6520 with air-brakes 1

L114468 Drive belt, 2515 mm length 6620 with air-brakes 1

L167673 Console, air-conditioning compressor

6520 - 6920S without air-brakes 1



* Existing pulley needs to be replaced when thediameter is different.


6820 - 6920S with air-brakes 1


6820 - 6920S without air-brakes 1

R128659* Pulley for fan 6820 - 6920S 1R128660* Pulley for fan 6620 1

AL112102 Refrigerant hoseReceiver-drier to evaporator, up to tractor serial no. 398790

1


Evaporator to compressor, suction side, without air-brakes; 6820 - 6920S

1

AL160830 Refrigerant hoseEvaporator to compressor, suction side, with air-brakes; 6820 - 6920S

1

AL162467 R134A receiver-drier Up to tractor serial no. 398790 1

AL163559 R134A receiver-drier From tractor serial no. 398791 1

AL179933 Refrigerant hoseReceiver-drier to evaporator, from tractor serial no. 398791

2



5.2 WEIGHTSPlease note that the weights displayed in this catalogueare available through EPDC (DNS-System/JDPoint).

Front base weights

Models: 6020 - 6520, 6020SE - 6520SE, 6215, 6515Note:not compatible with front PTO

Models: 6220Note:not compatible with front PTONote: if tractor is equipped with a 551 Series front

loader only this front weight support can be installed (as it is dimensionally smaller than AL176563 front weight support, 60 kg)

Models: 6320 - 6920SNote:not compatible with front PTO

Quick-tatch weights

Models: 6020 - 6920S, 6020SE - 6520SE, 6215, 6515Note: includes 10 x 50 kg left (L38449)

and 10 x 50 kg right (L38450)

Front weight stop kitThe attachment kit includes two special couplingweights weighing 50 kg each that can be used within afront weight package to create a trailer coupling. Thetotal kit weighs 100 kg.

Models: 6020 - 6920S, 6020SE - 6520SE, 6215, 6515

Mounting kitsFor 8 - 18 quick-tatch weights

Models: 6020 - 6920S, 6020SE - 6520SE, 6215, 6515


AL176563 Front weight support, 60 kg(for max. 14 quick-tatch weights)


8770 AL176564 Front weight support, 70 kg(for max. 14 quick-tatch weights)


8771 AL176565 Front weight support, 110 kg(for max. 18 quick-tatch weights)


AL71258 Set of 20 quick-tatch weights, 50 kg each

Code Bundle DescriptionAL119964 Front weight stop kit, 2 x 50 kg


AL119967 Mounting parts for 6, 8, 10 quick-tatch weights


Models: 6120 - 6920S, 6120SE - 6520SE, 6515


Pick up weight - 900 kgFits on all 6020 Series base weights and Cat. II/III rear3-point hitch or front hitch.

Models: 6320 - 6920SNote: for tractors with MFWD only, cannot be

installed in combination with front weights.

Center link bracketRequired, if pick-up weight is used on the rear or front3-point hitch. Includes two spacer bushings, if 400 kgcentre pick-up weight section only is used in the 3-point hitch.

Models: 6320 - 6920S


AL119968 Mounting parts for 12 & 14 quick-tatch weights


AL82932 Mounting parts for 16 & 18 quick-tatch weights

Code Bundle Description9508 AL112166 Pick up weight, 900 kg


9515 AL113121 Center link bracket for pick up weight (with distance tubes)


Horicon weight Package8 x 20 kg front weights with 20 kg carrier attached tothe front of frame behind 50 kg type front weights.

Models: cab only: 6120 - 6920SNote: install only with 110 kg base weight

Models: cab only: 6120 - 6920SNote: install only with 110 kg base weight

Front shields

Models: 6520 - 6920S, 6520SE, 6515

Models: 6020 - 6420S, 6020SE - 6420SE, 6215

REAR WHEEL WEIGHTS

Rear wheel weight - 38,5 kgFor steel wheels 28” and bigger on flanges.

Models: 6020 - 6920S, 6020SE - 6520SE, 6215, 6515Note: Includes first set of parts bolted to the rim

(base mounting parts).

Code Bundle Description9500 AL160627 Horicon weight package, 180 kg


AL71269 2 x 20 kg front weight forHoricon weight package

Code Bundle DescriptionAL157298 Front shield

Code Bundle DescriptionAL157299 Front shield


9520 AL119955 Rear wheel weight set, 77 kg (2 x 38,5 kg)


Models: 6020 - 6920S, 6020SE - 6520SE, 6215, 6515Note: Includes additional set of parts (if base

mounting parts included in AL119955 are installed).

Rear wheel weight - 55 kgFor steel wheels 34” - 38” on flange axles.

Models: 6020 - 6920S, 6020SE - 6520SE, 6215, 6515Note: Includes first set of parts bolted to the rim

(base mounting parts).

Models: 6020 - 6920S, 6020SE - 6520SE, 6215, 6515Note: Includes additional set of parts (if base

mounting parts included in AR56636 are installed).

Models: 6020 - 6920S, 6020SE - 6520SE, 6215, 6515Note: Please order in addition mounting parts

according to parts catalog.Note: for steel wheels 34’’ - 38’’ on flange axles


AR56632 Rear wheel weight set, 77 kg (2 x 38,5 kg)


9525 AR56636 Rear wheel weight set, 110 kg(2 x 55 kg)


AL119956 Rear wheel weight set, 110 kg(2 x 55 kg)


AL176898 Rear wheel weight set on palette,(20 x 55 kg)


5.3 CHASSIS PARTS

Front fendersFor safer high speed road transport and reduced tractorsoiling. Large, full-coverage flexible front fenderswith wide range of adjustments to adapt to thedifferent tread settings to protect the cab from mud anddebris.

Front fenders for 2WD tractors

Models: 6020 - 6620, 6020SE - 6620SE, 6215, 6515

Front fenders for 4WD tractors

Models: 6020 - 6620, 6020SE - 6620SE, 6215, 6515

Models: 6020 - 6620, 6020SE - 6620SE, 6215, 6515

Models: 6020 - 6620, 6020SE - 6620SE, 6215, 6515

Models: 6020 - 6620, 6020SE - 6620SE, 6215, 6515

Models: 6020 - 6620, 6020SE - 6620SE, 6215, 6515

Base mounting kit for 4WD front fendersSupporting parts and hardware required if respectivefront fender field kits are ordered.

Models: 6020 - 6920S, 6020SE - 6520SE, 6215, 6515

Code Bundle Description8840 AL180215 2WD front fenders


8841 AL180095 MFWD rigid front fenders,370 mm width










AL71218 Base mounting kit for MFWD front fender


Models: 6020 - 6420, 6020SE - 6320SENote:This Kit is no longer available, please order

individual parts according to parts catalog.Note:Order additionally: AL71218 mounting kitFor tire sizes:

• 9.5-24, 10.5-18, 11.2-24, 275/80R18

Models: 6020 - 6820, 6020SE - 6520SE, 6215Note:This Kit is no longer available, please order

individual parts according to parts catalog.Note:Order additionally: AL71218 mounting kitFor tire sizes :

• 11.2-28, 12.4-24, 12.4-28, 12.5-20, 335/80R20

Models: 6020 - 6920S, 6020SE - 6520SE, 6215, 6515Note:This Kit is no longer available, please order

individual parts according to parts catalog.For tire sizes:

• 13.6-24• 13.6-28• 14.5-20• 14.9-20• 14.9-24• 14.9LR20• 360/70R24• 375/75R20• 380/70R24• 380/70R28

Models: 6820 - 6920SNote:This Kit is no longer available, please order


• 14.9-28• 380/85R28

Models: 6120 - 6420S, 6220SE - 6420SENote:This Kit is no longer available, please order


• 14.9-26• 16.9-24• 420/70R24• 480/65R24



• 16.9R24• 16.9R26• 16.9R28• 420/70R24• 420/70R28

Code Bundle Description8841 AL71215 MFWD front fender, 310 mm width









• 16.9-28• 420/70R28• 420/85R28



• 480/65R24• 480/65R28• 540/65R24



• 18.4R26• 480/65R24• 480/70R24• 480/70R26• 480/70R28• 540/65R24• 540/65R26• 540/65R28

Models: 6820 - 6920SNote: This Kit is no longer available, please order


• 16.9-30• 480/65R28• 480/70R28• 480/70R30• 480/85R30• 540/65R28• 540/65R30

Conversion from rigid front fenders to turnable front fenders

Models: 6120 - 6920SNote: only for front fenders with single arm support

from tractor serial no. XXXXXXNote: Depending on the options of the tractor,







AL175211 Conversion kit from rigid frontfenders to turnable front fender


L173579 Strapfor tractors with front fenders of 370, 420 and 480 mm width

2

L173580 Strapfor tractors with front fenders of 540 and 620 mm width

2

L165857 Strapfor tractors with front fenders of 355, 410 and 470 mm width

2

L170462 Strapfor tractors with front fenders of 520 mm width

2

L158118 Bumper 2

37M7199 Special hex headscrew M6X25 2

AL165335 Fender stop panelfor 4 cyl. tractors with front loader application

1

AL165336 Fender stop panelfor 6 cyl. tractors with front loader aplication

1


Turnable front fendersA single arm fender for MFWD axles offers a greatersteering angle. It stops at the frame and turns while thetires move further until the maximum steering angle isreached. The turning circle now is the same as ontractors without fenders.

Models: 6020 - 6620, 6020SE - 6620SENote: for front loader application an additional fender

stop panel AL165335 (4 cyl. tractors) or AL165336 (6 cyl. tractors) has to be ordered separately

For tire sizes:• 11.2R20• 11.2R24• 11.2R28• 12.4R24• 12.4R28• 13.6R24• 13.6R28• 280/70R16• 280/85R24• 280/85R28• 320/70R24• 320/85R24• 320/85R28• 340/85R24• 340/85R28• 360/70R24

Models: 6020 - 6920S, 6020SE - 6620SE, 6215, 6515Note: for front loader application an additional fender


Note:not for APL 2060For tire sizes:

• 14.9R20• 14.9R24• 14.9R28• 16.9R24• 16.9R28• 16.9R30• 375/70R20• 380/70R24• 380/70R28• 380/85R24• 380/85R28• 380/85R30• 420/65R24• 420/70R24• 420/70R28• 420/85R24• 420/85R28• 420/85R30

Models: 6020 - 6920S, 6020SE - 6620SE, 6215, 6515Note: for front loader application an additional fender



• 440/65R24• 480/65R24• 480/65R28• 480/70R24• 480/70R28• 480/70R30

8842 AL180096 Turnable front fender, 370 mm width

Code Bundle Description8842 AL180098 Turnable front fender, 420 mm width



Models: 6020 - 6920S, 6020SE - 6620SENote: for front loader application an additional fender



• 520/60R28• 540/65R24• 540/65R28• 540/65R30• 540/75R28

Models: 6020 - 6920S, 6020SE - 6620SENote: for front loader application an additional fender



• 600/60R28• 600/60R30• 600/65R28

Fender side extensions

The fender extensions are a one piece design.

They are compatible for use with snow chains on therear wheels, for example for forestry applications.Cover large tires and significantly reduce soiling oftractor and cab.

Models: 6020SE - 6420SE For tire sizes:

• 13.6R38• 16.9R34• 18.4R30• 480/70R34

Models: 6320 - 6420SFor tire sizes:

• 18.4R38

Models: with suspended cab: 6820 - 6920S For tire sizes:

• 460/85R38 • 18.4-38

Models: 6120 - 6420, 6020SE - 6420SEFor tire sizes:

• 13.6R38, 14.9R38, 16.9R34, 480/70R34, 18.4R34(6120, 6220, 6020SE - 6420SE)

• 16.9R38 (6220 - 6420)



Code Bundle DescriptionAL120094 Mounting parts for fender extensionAL174767 Fender extension, 110 x 15 mm

Code Bundle DescriptionAL120094 Mounting parts for fender extensionAL174767 Fender extension, 110 x 15 mmL116670 Splash guard LHL116671 Splash guard RH


Code Bundle DescriptionAL120094 Mounting parts for fender extensionL156328 Fender extension, LH, 110 x 60 mmL156329 Fender extension, RH, 110 x 60 mmL116670 Splash guard LHL116671 Splash guard RH


• 18.4R34 (6320)

• 14.9R38, 480/70R38 (6320, 6420)

• 18.4R30 (6020SE - 6220SE)

• 480/70R38, 16.9R38 (6220SE - 6420SE)

Models: 6020SE - 6220SE For tire sizes:

• 16.9R30

Models: 6320 - 6420S with suspended cab, 6520 - 6920S

For tire sizes:• 18.4R38

(6320 6420S with suspended cab)• 16.9R38, 18.4R38, 480/70R38, 520/70R38,

420/85R38, 460/85R38, 540/65R38 (6520)

• 540/65R38 (6520 with suspended cab)

• 18.4R38, 460/85R38, 520/70R38 (6620)

• 18.4R38, 460/85R38(6820, 6920S)

Models: 6320, 6420SFor tire sizes:

• 520/70R38• 600/65R38

Models: 6520 - 6920S with suspended cabFor tire sizes:

• 20.8R38• 520/85R38• 580/70R38• 650/65R38

Models: 6120 - 6420, 6020SE - 6420SEFor tire sizes:

• 520/70R34 (6120 - 6420, 6020SE - 6420SE)• 540/65R38 (6320, 6420)

Models: 6320 - 6420S with suspended cab, 6520 - 6920S

For tire sizes:• 520/70R38

(6320 - 6420S with suspended cab, 6520, 6620)• 540/65R38 (6520)• 600/65R38

(6320 - 6420S with suspended cab, 6520 - 6920S)• 20.8R38, 520/85R38, 650/65R38

(6520 - 6920S)

Code Bundle DescriptionAL120094 Mounting parts for fender extensionL156328 Fender extension, LH, 110 x 60 mmL156329 Fender extension, RH, 110 x 60 mm







Fender extensionFor heavy duty work and bad weather conditions JohnDeer offers a mud flap kit for 6020 Series tractors. Themud flap provides an additional protection to avoiddirt on your tractor and following vehicles. It is madeof rugged and flexible rubber, that bears up againstworst application conditions. The kit fits to all 6020Series tractors with a 190 mm width fender extensions.

Models: cab only: 6120 - 6920S, 6020SE - 6620SENote:can only be installed if the tractor already has a

190 x 65 mm or 190 x 20 mm side-extension on its fenders.

Code Bundle DescriptionAL159975 Fender extension


5.4 AXLES

Extensions Rear axleRear axle extensions are available to match differenttread settings.

Models: 6020 - 6520, 6020SE - 6520SE, 6215, 6515Note: In combination with rear wheels with bolt circle

measuring 203 mm in dia.Note: Increased tread setting from 1912 mm-1976 mm

Models: 6020 - 6520, 6020SE - 6520SE, 6215, 6515Note: In combination with rear wheels with bolt circle

measuring 203 mm in dia.Note: Increased tread setting from 1916 mm-2004 mm

Models: 6020 - 6520, 6020SE - 6520SE, 6215, 6515Note: for 6020 - 6220 order addionally:

1 x L116668 reinforcement ringNote: Increased tread setting from 1912 mm-2138 mm

Front axle

Models: 6020 - 6520, 6020SE - 6520SE, 6215, 6515

Note: In combination with front wheels with bolt circle measuring 275 mm in dia.

Note: Increased tread setting from 2016 mm-2134 mm

Tie-rod extension - front axleFor extension of the track width by 102 mm at eachside (left and right hand).

Models: 6215, 6515Note:This Kit is no longer available, please order

individual parts according to parts catalog.Note:with open operator’s station


AL156776 Distance hub, 30 mm, for rear axle extension


AL156779 Distance hub, 44 mm, for rear axle extension


AL156777 Distance hub, 111mm, for rear axle, treadadjusting


AL156778 Distance hub, 60mm, for centering the front wheels

Code Bundle DescriptionAL164291 Tie rod extension, front axle


Track extension front and rear axleThe extended track and extra-wide vehicle lighting areintended only for 6-cylinder tractors with a 335 mm(13.19 inch) hole-circle diameter on front wheels andwith a 275 mm (10.83 inch) hole-circle diameter onrear wheels.In order to work as efficient as possible, progress inrow planting and the use of wider attachments demandflexible track widths. To meet these demands JohnDeere offers track extensions for 6-cylinder tractormodels.With the help of the extended track, it is possible tocover more rows at once and to ride within the rowswithout affecting cultivations or banks. For sprayerapplications the new field installation kits provideanother advantage: the extended track of the tractorallows a superior support and balance adjustment ofthe sprayer.Two different extensions are available:

• Extension 2 x 94 mm provides a track extensionto 2000 mm. Depending on the overall tractorwidth, additional lighting kits for extra-widevehicles are available.

• Extension 2 x 219 mm provides a track extensionto 2250 mm. Depending on the overall tractorwidth, additional lighting kits for extra-widevehicles are available.

Models: 6520 - 6920S (cab only), 6620SENote: Maximum overall width of 2550 mm (100.4 inch)Note: For maximum overall width of 2550 - 2750 mm

(100.4 - 108.3 inch) extra-wide vehicle lighting is needed, please order in addition 1 x AL169786

Note: Must NOT be installed on tractors with dual wheels

Note: Important when extending the track of the rear axle and rear wheels are attached by studs and wheel nuts: length of studs has to be 120 mm (4.72 inch) and wheel nuts has to be M20 x 1.5. If required, please order 16 x L150648 (stud) and 16 x 14M7499 (wheel nut) separately.

Note: Important when extending the track of the rear axle and rear wheels are attached by wheel bolts: wheel bolts has to be M20 x 1.5 x 95 cap screws. If required, please order 16 x L152520 (wheel bolt) separately.

Models: 6520 - 6920S (cab only), 6620SENote: Maximum overall width of 2750 - 3000 mm

(108.3 - 118.11 inch)Note: For maximum overall width of 2750 - 3000 mm

(108.3 - 118.11 inch) extra-wide vehicle lighting and warning sign is needed, please order in addition 1 x AL164386

Note: Must NOT be installed on tractors with dual wheels

Note: Important when extending the track of the rear axle and rear wheels are attached by studs and wheel nuts: length of studs has to be 120 mm (4.72 inch) and wheel nuts has to be M20 x 1.5. If required, please order 16 x L150648 (stud) and 16 x 14M7499 (wheel nut) separately.

Note: Important when extending the track of the rear axle and rear wheels are attached by wheel bolts: wheel bolts has to be M20 x 1.5 x 95 cap screws. If required, please order 16 x L152520 (wheel bolt) separately.


AL162738 Track extended to 2000 mm(78.74 inch)


AL179433 Track extended to 2250 mm(88.58 inch)


Models: 6520 - 6920S (cab only), 6620SENote:Maximum overall width of 2750 - 3000 mm

(108.3 - 118 inch)

Models: 6520 - 6920S (cab only), 6620SENote:Maximum overall width of 2750 mm (108.3 inch)

Reinforcement of rear wheelsFor heavy-duty operations in the field, the rear wheels(on flanged rear axle with fine thread) can be re-inforced with this kit.

Models: 6420 - 6920SNote:On tractors not equipped with a second spacer

ring, follwing parts must be ordered in addition:


AL164386 Extra-wide vehicle lighting and warning sign

Code Bundle DescriptionAL169786 Extra-wide vehicle lighting


AL155035 Rear wheel reinforcement for heavy duty operations in the field


L152520 M20 x 1.5 x 95 cap screw

for tractors with 80 mm long wheel bolts 16

24M7242 Washer for tractors with 80 mm long wheel bolts 16

L150648 M20 x 1.5 x 120 stud for tractors with 105 mm long studs 16


5.5 BRAKES AND STEERING

Hydraulic trailer brake

The hydraulic trailer brake system gives a powerful,safe braking function. The tractor brake-pedal operatedsystem gives a trailer braking function proportional tothe pressure applied to the pedal.The field kits below permit the tractor to be retro-fittedwith an hydraulic trailer brake.

Models: 6020 - 6620, 6020SE - 6620SENote: Depending on the options of the tractor,


Models: 6215, 6515

Models: 6820 - 6920Note: Depending on the options of the tractor,


Code Bundle Description9350 AL172929 Hydraulic trailer brake


AL165274Hydraulic trailer brake valve (I = 6)

6320 - 6620 and6320SE - 6620SE with cab and MFWD;

6520, 6620 and6520SE, 6620SE with cab and no MFWD or with 2-post ROPS

1

AL165275 Hydraulic trailer brake valve (I = 9.2)

for UK;

6020 - 6220 and6020SE - 6220SE;

6320, 6420 and6320SE, 6420SE with cab and no MFWD or with 2-post ROPS;

6320 - 6620 MFWD with brake

1

Code Bundle DescriptionAL174450 Hydraulic trailer brake

Code Bundle Description9350 AL172930 Hydraulic trailer brake


AL165274 Hydraulic trailer brake valve (I = 6)

for UK;

with cab and MFWD 1

AL165275 Hydraulic trailer brake valve (I = 9.2)

MFWD with brake for UK;

MFWD with brake1


Pneumatic trailer brake

The pneumatic trailer brake system consists basicallyof a two line system. This is the same as used today oncommercial vehicles.Pre-braking function:

• short brake pedal travel allows braking of thetrailer without braking the tractor. This feature isrequired to control the trailer and prevent jackknifing.

• A quick release valve opens the trailer brakeimmediately after release of the brake pedal forbetter acceleration.

Single line systems for pneumatic trailer brakes areavailable as well. These kits are supplementary to thedual-line systems, they can not be used stand alone.The dual-line system has to be installed first before thesingle line system should be ordered.The field kits below permit the tractor to be retro-fittedwith a pneumatic trailer brake system.

Models: cab only: 6120 - 6420SNote:up to tractor serial no. 398655Note: Depending on the options of the tractor,


Models: cab only: 6520, 6620Note:up to tractor serial no. 398655Note: Depending on the options of the tractor,



9356 AL157141 Pneumatic trailer brake, dual-line system


AL159976 Trailer brake valve without brakes on front wheels 1

AL151103 Trailer brake valve with brakes on front wheels 1

AL67648 Pressure-limiting valve

with brakes on front wheels 1

L154523 Elbow fitting with brakes on front wheels 1

L80375 Special ring with brakes on front wheels 2

R104558 O-ring with brakes on front wheels 2

14M7492 Nut with brakes on front wheels 2


L114290 Poly-V-belt (2385 mm length) without air-conditioning 1

AL157596 Deflection roll without air-conditioning 1

L114293 Poly-V-belt (2525 mm length) with air-conditioning 1

L153010 Refrigerant hose with air-conditioning 1AL161500 Refrigerant hose with air-conditioning 1R113050 O-ring with air-conditioning 1AL158320 Refrigerant hose with air-conditioning 1P50883 O-ring with air-conditioning 1


9356 AL157140 Pneumatic trailer brake, dual-line system







Models: cab only: 6020 - 6620Note: up to tractor serial no. 398655Note: This single-line system can only be installed in

connection with dual-line system AL157140 and AL157141.


Models: cab only: 6820 - 6920SNote: up to tractor serial no. 398655Note: Depending on the options of the tractor,








AL157596 Deflection roll without air-conditioning 1


AL161500 Refrigerant hose with air-conditioning 1R113050 O-ring with air-conditioning 1R33259 O-ring with air-conditioning 1L114670 O-ring with air-conditioning 1AL160830 Refrigerant hose with air-conditioning 1P50883 O-ring with air-conditioning 1

Bundle Description Remark QTYCode Bundle Description

AL157144 Pneumatic trailer brake, single-line system


AL173363 Fuel tank (160 l) 6020 - 6420S if not already equipped 1

L156143 Bracket with suspended cab 1AL79740 Bracket without suspended cab 1

Code Bundle Description9356 AL157142 Pneumatic trailer brake, dual-line system

Bundle Description Remark QTYL101379 Bracket without suspended cab 1AL154881 Pilot line without suspended cab 1AL119370 Linkage without suspended cab 1

AL119371 Linkagewithout suspended cab, but with AutoPowr transmission

1

11M7058 Cotter pin with suspended cab 114M7273 Nut (M8) with suspended cab 219M8008 Screw (M8x35 mm) with suspended cab 224M7055 Washer with suspended cab 3AL37332 Fitting with suspended cab 1AL151104 Bracket with suspended cab 1AL152869 Pilot line with suspended cab 1AL151106 Linkage with suspended cab 1

AL151107 Linkage with suspended cab and AutoPowr transmission 1








Models: cab only: 6820 - 6920SNote:up to tractor serial no. 398655Note: This single-line system can only be installed in

connection with dual-line system AL157142.Note: Depending on the options of the tractor,


Models: 6020SE - 6620SENote:up to tractor serial no. 398655Note:Depending on the options of the tractor,




L101118 Hose with brakes on front wheels 1

L154383 Bracket with brakes on front wheels 1

Z32994 Fitting with brakes on front wheels 2

L64164 Back-up ring with brakes on front wheels 2




19M7324 Screw (M8X75 mm) with brakes on front wheels 2



AL161500 Refrigerant hose with air-conditioning 1R113050 O-ring with air-conditioning 1AL160830 Refrigerant hose with air-conditioning 1P50883 O-ring with air-conditioning 1



Bundle Description Remark QTYL156143 Bracket with suspended cab 1AL79740 Bracket without suspended cab 1



AL161651 Pneumatic trailer brake, dual-line system


L155194 Shield for 4 cyl. tractors with air conditioning 1

L114293 Drive beltfor 4 cyl. and 6 cyl. tractors with air conditioning

1

L114290 Drive beltfor 4 cyl. and 6 cyl. tractors without air conditioning

1

R128661 Belt pulleyfor 4 cyl. and 6 cyl. tractors without air conditioning

1

AL157596 Deflection rollfor 4 cyl. and 6 cyl. tractors without air conditioning

1

AL152714 Compressed air hose for 4 cyl. tractors 1

AL152715 Compressed air hose for 6 cyl. tractors 1

L153022 Air intake hose for 4 cyl. tractors 1L153344 Air intake hose for 6 cyl. tractors 1AL155089 Oil return line for 4 cyl. tractors 1AL116422 Oil return line for 6 cyl. tractors 1

AL161173 Refrigerant line for tractorswith air conditioning 1


Models: cab only: 6120 - 6620, 6020SE - 6620SENote: from tractor serial no. 398656Note: This single-line system can only be installed in

connection with dual-line system.

Models: cab only: 6820 - 6920SNote: from tractor serial no. 398656Note: This single-line system can only be installed in

connection with dual-line system.

Models: cab only: 6820 - 6920SNote: from tractor serial no. 398656Note:Depending on the options of the tractor,


Models: cab only: 6820 - 6920SNote: from tractor serial no. 398656Note: Depending on the options of the tractor,


Models: cab only: 6520, 6620, 6520SE, 6620SENote: from tractor serial no. 398656Note: Depending on the options of the tractor,







AL164976 Pneumatic trailer brake, dual-line system without precharge valve

Bundle Description Remark QTYAL157596 Deflection roll without air-conditioning 1

L153281 Drive belt, 2375 mm (93.50 inch) without air-conditioning 1

AL161500 Refrigerant hose with air-conditioning 1AL160830 Refrigerant hose with air-conditioning 1

L153282 Drive belt, 2505 mm (98.63 inch) with air-conditioning 1

24M7055 Washer 1

L158770 Protective edging 1

19M7513 Cap screw 1

AL160421 Coupling end (brake) for Great Britain only 1

AL160422 Coupling end (supply) for Great Britain only 1


AL164977 Pneumatic trailer brake, dual-line system with precharge valve





24M7055 Washer 119M7513 Cap screw 1

L158770 Protective edging 1

L113893 Screw 2









L114468 Drive belt, 2515 mm (99.01 inch) with air-conidtioning 1

24M7055 Washer 119M7513 Cap screw 1




Models: cab only: 6520, 6620, 6520SE, 6620SENote: from tractor serial no. 398656Note:Depending on the options of the tractor,


Models: cab only: 6120 - 6420S, 6020SE - 6420SENote: from tractor serial no. 398656Note:Depending on the options of the tractor,


Models: cab only: 6120 - 6420S, 6020SE - 6420SENote: from tractor serial no. 398656Note:Depending on the options of the tractor,








L114468 Drive belt, 2515 mm (99.01 inch) with air-conidtioning 1

24M7055 Washer 119M7513 Cap screw 1L113893 Screw 2







R128661 Belt pulley without air-conditioning 1AL161500 Refrigerant hose with air-conditioning 1AL158320 Refrigerant hose with air-conditioning 1AL173843 Refrigerant hose with air-conditioning 1


L153010 Radiator hose with air-conidtioning 124M7055 Washer 119M7513 Cap screw 1







R128661 Belt pulley without air-conditioning 1AL161500 Refrigerant hose with air-conditioning 1AL158320 Refrigerant hose with air-conditioning 1AL173843 Refrigerant hose with air-conditioning 1


L153010 Radiator hose with air-conidtioning 124M7055 Washer 119M7513 Cap screw 1L113893 Screw 2





Dampened Shock Valves


individual parts according to parts catalog.Note:up to tractor serial no. 358863

Accumulator

Models: 6020 - 6920SNote: only for tractors without hydraulic cab

suspension

Models: 6020 - 6920SNote: only for tractors with hydraulic cab suspensionCode Bundle Description

AL157038 Field kit for attenuated shock valves in the steering system


AL169778 Field kit accumulator withmounting parts


AL169779 Field kit accumulator withmounting parts


5.6 STORAGE Tool box

An external detachable and lockable tool box withconvenient carrying handle is located in front of thecab. It has the capacity to hold tools and a selection oflinkage balls, hitch pins and linchpins for implementattachment.


Additional storage container - 45l

With a capacity of 45 l and a 45 kg maximum payload thisnew sheet metal storage container offers additional space,e.g. for rubber boots, oil cans, bulky tools, grease guns etc.Equipped with 2 handles at the side it can easily be carried.With the help of the included quick lock pin the containercan be closed rapidly.

The fastening on the back allows a quick installation to allexisting front weights: base weights, front weights and the900 kg pick up weight.

Models: 6020 - 6920S, 6020SE - 6620SE, 6215, 6515Note: 45 kg maximal payload; only for front installation:

attachable to base weights, front weights and 900 kg pick up weight.


8850 AL156255 Sheet metal tool box, mounted to main frame, right hand side

Code Bundle DescriptionAL120005 Storage container, 45 l


5.7 HITCHES AND ASSOCIATED EQUIPMENT

Tool barsFor light weight cat. II implements attached to the toolbar, 3 different versions are available:

• Tool bar for links with ball ends • Tool bar for links with hook ends • Tool bar for links with hook ends - extended length

Models: 6120 - 6920S, 6020 SE - 6420SENote:This Kit is no longer available, please order

individual parts according to parts catalog.Note: For hook-type, cat. II lower links, complete

with stabilizer bracket (without ball guides).

Release cablesFor upper and lower link hooks including hardware(screws, clamps, holder etc.)

Models: 6120 - 6920S, 6020SE - 6420SE

Remote control of trailer hitches

Models: cab only: 6120 - 6420SNote: This Kit is no longer available, please order


Models: cab only: 6120 - 6420SNote: This Kit is no longer available, please order



9476 AL81951 Tool bar for links with hook ends, cat. II (standard)


AL81619 Cables for controlling the center link and draft links


AL158725 Remote control of height-adjustable trailer hitches

Code Bundle DescriptionAL158726 Remote control of rigid trailer hitches


Stabilizer bar “Economy” For use only with cat. II and cat. III flat bar draft links.These provide manual adjustment of lateral hitchmovement.

Models: 6120 - 6620, 6020SE - 6520SE, 6215, 6515

Models: 6820 - 6920S

Automatic stabilizer barsAutomatic stabilzer bars offer for the respectiveimplements the possiblity to have:

• lateral sway over a self defined lower range and nosway above, or

• no sway over the whole range

Models: 6120 - 6620

Models: 6820 - 6920S

Stabilizer chains with sway control blocksFor almost universal implement control.

Code Bundle DescriptionAL117961 Stabilizer bar “Economy”

Code Bundle DescriptionAL151119 Stabilizer bar “Economy”


AL176759 Automatic stabilizer bars,right hand and left hand


AL176760 Automatic stabilizer bars,right hand and left hand


Models: cab only: 6120 - 6620

Note: for tractors with telescopic lift link or flat steellift link order in addition:

Lock for draft link hooksWhen implements with asymmetrical load areattached, or when driving through high-growingbushes and trees, the draft links must be securedagainst opening accidentally.

Models: 6020 - 6920S, 6020SE - 6620SE

Swinging drawbar

Drawbars are adjustable in length and the swingingfeature can also be locked out.

Models: 6020 - 6620, 6020SE - 6520SE, 6215, 6515

Models: 6820 - 6920S

Note: not used with Powrshift transmission

Code Bundle DescriptionAL80849 Stabilizer chains

Bundle Description QTYL79378 Console for cat. II or cat. III 219M7489 Screw M16x45 for cat. II 419M7409 Screw M16x50 for cat. III 4

Code Bundle DescriptionAL165485 Lock for draft link hooks

Code Bundle Description9441 AL80054 Swinging drawbar with hammer strap


9441 AL81349 Swinging drawbar with hammer strap,includes swinging drawbar L115073


Models: 6820 - 6920SNote: used with Powrshift transmission

Guide Ball HolderTo store the guide balls for hook type 3 point hitch andtop link quick couplers just where they are needed.

Models: 6020 - 6920S, 6020SE - 6620SENote: for all tractors without pneumatic trailer brake Note: for tractors with pneumatic trailer brake from

tractor serial no. 398656

Hitch Holder for upper wagon hitchChanging the implement from trailer to three-pointhitch in the field and not knowing where to put theupper trailer hitch.John Deere now offers the solution - the hitch holderfor the upper wagon hitch. The holder is a convenientsolution that can easily be mounted within minutesonto all kinds of front weights with coupling recess.The wagon hitch can easily be affixed and is stored ina convenient height you can reach without stooping.The holder is adjusted with two fixing screws thatagain can be adjusted in two widths depending on theweight the holder has been mounted onto.

Models: 6020 - 6920S, 6020SE - 6620SE


AL119419 Swinging drawbar, includes swinging drawbar AL151017

Code Bundle Description9463 AL161925 Guide Ball Holder

Code Bundle DescriptionAL165650 Hitch holder for upper trailer hitch


Load control shaft, support


individual parts according to parts catalog.Note: without receiving pins on main frameNote: up to serial no. XXXXXX

Models: 6820 - 6920SNote: from serial no. XXXXXX

John Deere Pick Up HitchThe John Deere Pick-up Hitch provides one-manhitching with excellent visibility. The hitch can behydraulically adjusted in length and height forcoupling trailers or trailed implements, even underdifficult working conditions like uneven ground, verylow placed trailers, etc.Two different coupling devices are available:

• hook type is in base • drawbar can be ordered optional

Either of the two items can be stored in a framemounted universal holder

.

Models: 6020 - 6620, 6020SE - 6520SENote: order in addition:

1 x L112143 from tractor serial no. 192965

Models: 6820 - 6920SNote: order in addition:

1 x L112143 from tractor serial no. 192965

Code Bundle DescriptionAL156675 Load control shaft support

Code Bundle DescriptionAL160835 Load control shaft support

Code Bundle DescriptionAL118022 JD pick up hitch with hook

Code Bundle DescriptionAL159072 JD pick up hitch with hook


Drawbar


Electro-hydraulic control of pick-up hitch

Models: 6320 - 6620Note:This Kit is no longer available, please order

individual parts according to parts catalog.Note:only for tractors with CommandArm

Note:please order in addition:


individual parts according to parts catalog.Note:only for tractors with CommandArmNote:please order in addition:

Low position hitcheswith 3-in-1 wagon hitch

Models: 6020 - 6920S, 6020SE - 6620SE


9447 AL157346 Drawbar with storage forJD pick up hitch


AL164328 Field kit for electro-hydraulic control of pick-up hitch

Bundle Description QTY38H5015 Elbow fitting 1AL163534 Endplate 1AL156366 Shuttle valve 1L155798 Console 1L153588 Flanged screw 2


AL164326 Field kit for electro-hydraulic control of pick-up hitch

Bundle Description QTY38H5015 Elbow fitting 2AL163534 Endplate 1AL156366 Shuttle valve 1AL156849 Oil line 1L156614 M10 special screw 138H5215 T-fitting 1

Code Bundle Description9419 AL177172 Rail with piton fix insert slider


Models: 6020 - 6920S, 6020SE - 6620SE

Models: 6020 - 6920S, 6020SE - 6620SE

Models: 6020 - 6920S, 6020SE - 6620SE

Low position wagon hitchesfor 9-position rail

Models: 6020 - 6920S, 6020SE - 6620SENote: for 9-position rail only

Models: 6020 - 6920S, 6020SE - 6620SENote: for 9-position rail only

Code Bundle DescriptionAL177174 Piton fix insert slider

9405 AL177173 Rail with ball typ insert slider

Code Bundle DescriptionAL177175 Ball typ insert slider


AL176731 Wagon hitch height-adjustable,piton fix


AL176726 Wagon hitch height-adjustable,ball


Forced steering systemfor wagon hitch height-adjustable(ball type)

Models: 6020 - 6920S, 6020SE - 6620SE

Models: 6020 - 6920S, 6020SE - 6620SE

Forced steering systemfor insert slider (ball type)

Models: 6020 - 6920S, 6020SE - 6620SE

Models: 6020 - 6920S, 6020SE - 6620SE

Yoke for draft link supportHinged to the left and right hand side rear axle, itprotects the draft sensor pins from shock loads underextreme draft work.

Models: 6320


AL176727Forced steering system (two sides)for wagon hitch height-adjustable,ball type


AL176728Forced steering system (one side)for wagon hitch height-adjustable,ball type


AL176729 Forced steering system (two sides)for ball typ insert slider


AL176730 Forced steering system (one side)for ball typ insert slider

Code Bundle DescriptionAL78129 Yoke for draft link support


5.8 VANDALISM PROTECTION KITS

Models: 6020 - 6620, 6020SE - 6520SE, 6215, 6515

Models: 6020 - 6420S, 6020SE - 6420SE, 6215Note:This Kit is no longer available, please order


Models: 6520 - 6920S, 6520SE, 6515Note: This Kit is no longer available, please order


Security door lock kitLocking the cab with an individual key, different fromthe standard ignition key, is helpful for many differentapplications of the tractor. John Deere therefore offersthe Security door lock field installation kit. It featuresan individual key system that prevents misuse of thestandard ignition key. This field kit provides individualsecurity by individual keys for all equipment keptinside the cab. The kit comes with four keys, in case ofdamage or loss a blank key can be ordered.

Models: cab only: 6120 - 6920S, 6020SE - 6620SENote: if needed please order in addition:


AL110170 Field kit, latch for oil filler neck, transmission - vandalism protection

Code Bundle DescriptionAL158987 Vandalism protection

Code Bundle DescriptionAL158988 Vandalism protection

Code Bundle DescriptionAL71345 Security door lock kit

Bundle Description QTYAL71350 Blank key 1


Lockable fuel tank cap

Models: 6020 - 6920S, 6515, 6020SE - 6420SE, 6620SE

Code Bundle DescriptionAL113087 Lockable fuel tank cap


Numerical Index

Bundle No. Page Bundle No. PageAL70278 58 AL119967 52AL71215 57 AL119968 53AL71216 57 AL120005 73AL71218 56 AL151119 75AL71258 52 AL151224 38AL71269 54 AL151508 22AL71345 82 AL153668 44AL77028 10 AL153672 39AL77680 11 AL154352 35AL78129 81 AL154354 35AL79915 28 AL155035 65AL80054 76 AL155363 36AL80126 38 AL156243 21AL80127 38 AL156255 73AL80849 76 AL156675 78AL81349 76 AL156731 44AL81619 74 AL156776 63AL81951 74 AL156777 63AL82290 13 AL156778 63AL82932 53 AL156779 63AL110170 82 AL156832 41AL111669 57 AL157038 72AL112070 43 AL157055 2AL112166 53 AL157090 43AL112428 12 AL157091 42AL113087 83 AL157097 26AL113121 53 AL157099 27AL113689 21 AL157140 67AL114321 37 AL157141 67AL114856 37 AL157142 68AL115672 46 AL157144 68AL116589 47 AL157145 69AL116924 46 AL157191 39AL117254 36 AL157233 2AL117366 36 AL157237 4AL117734 37 AL157238 4AL117838 15 AL157298 54AL117961 75 AL157299 54AL118022 78 AL157346 79AL118241 21 AL157569 35AL118486 12 AL157620 43AL119292 36 AL157751 39AL119419 77 AL157956 50AL119439 49 AL157957 50AL119955 54 AL158520 21AL119956 55 AL158552 58AL119964 52 AL158553 58

Bundle No. Page Bundle No. PageAL158554 57 AL162432 3AL158725 74 AL162433 1AL158726 74 AL162434 3AL158728 31 AL162450 16AL158767 40 AL162738 64AL158785 30 AL162899 40AL158792 22 AL163214 4AL158831 11 AL163513 21AL158981 19 AL163533 10AL158987 82 AL163534 10AL158988 82 AL163826 44AL159072 78 AL163978 19AL159273 14 AL163979 19AL159275 15 AL163980 19AL159296 16 AL164156 36AL159297 17 AL164158 36AL159314 26 AL164159 34AL159344 48 AL164161 34AL159345 49 AL164284 31AL159352 27 AL164291 63AL159374 22 AL164326 79AL159606 57 AL164328 79AL159607 57 AL164386 65AL159608 58 AL164673 45AL159939 21 AL164712 16AL159975 62 AL164723 70AL160215 23 AL164947 47AL160216 23 AL164948 47AL160217 24 AL164949 47AL160218 24 AL164950 48AL160414 11 AL164951 47AL160627 54 AL164952 48AL160799 30 AL164953 48AL160835 78 AL164975 70AL161122 26 AL164976 70AL161125 26 AL164977 70AL161617 28 AL164987 70AL161618 28 AL164988 70AL161651 69 AL164998 70AL161895 28 AL164999 70AL161897 28 AL165335 59AL161912 25 AL165336 59AL161913 25 AL165650 77AL161925 77 AL168015 45AL162171 2 AL169778 72AL162172 2 AL169779 72AL162357 39 AL169786 65


Numerical Index

Bundle No. Page Bundle No. PageAL169787 6 AL176728 81AL169788 6 AL176729 81AL169789 7 AL176730 81AL169790 7 AL176731 80AL169791 8 AL176759 75AL169792 9 AL176760 75AL169965 12 AL176898 55AL169971 18 AL177172 79AL170031 17 AL177173 80AL171054 30 AL177174 80AL171055 30 AL177175 80AL171547 42 AL178133 33AL172073 29 AL179433 64AL172666 20 AL180095 56AL172929 66 AL180096 59AL172930 66 AL180097 56AL173267 40 AL180098 59AL173370 45 AL180099 56AL173828 32 AL180100 59AL174268 33 AL180101 56AL174350 32 AL180102 60AL174359 43 AL180103 56AL174450 66 AL180104 60AL174687 10 AL180215 56AL175211 58 AR56632 55AL175264 43 AR56636 55AL175376 33 EC300182 13AL175679 38 LG102426 46AL176563 52 RE218823 41AL176564 52 RE243241 42AL176565 52 RE243242 41AL176726 80 RE509677 24AL176727 81 RE519696 24

vivlia antallaktikwn 4.6120-6920 serie

Documents