SKODA Fabia, Roomster

SKF design evolution: different design on SKF bearing compared to OEM

VKBA 6635

VKBA 6635Technical Bulletin – November 2014

For VKBA 6635, SKF has chosen to develop and apply a different design for the independent aftermarket with no locking ring as can be found on the OEM part. There is no difference in the fitting procedure, bearing performance is equal or better and this change of design is thoroughly tested and approved by SKF.

Install confidencewww.vsm.skf.com

® SKF is a registered trademark of the SKF Group. © SKF Group 2014The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless written permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein.